14 best andis dog grooming clippers

Product description

Andis ProClip Super 2-Speed Detachable Blade Clipper, Professional Animal Grooming, AGC2

• Cool and quiet running , Volts - 120 V
• Perfect for all coats and breeds.
• Detachable blade design for ease of changing and cleaning.
• Super two-speed rotary motor for performance that pros demand.
• 14' heavy-duty cord for ease of movement around animals and equipment.
• Shatter-proof housing.
• Strokes per Minute: 3400,4400 spm

User questions & answers

Question:	what blades come with clipper purchase
Answer:	these blades are fine for humans a #10 good for back of neck a #5 or 7 for shaping & blending packaging will tell you which clippers they will fit
Question:	I have standard poodles, who have gotten matted. Will these clippers work on that type of thick coat? Cheaper clippers are useless
Answer:	An FC blade is a finished cut. The skip tooth blade goes through thick or matted fur better. So if your dogs fur isn't matted or super thick you should only need an FC blade. I use a FC 3-3/4 or 4 FC on a cockapoo and either does a good job (the 4 just a little shorter cut) . The FC gives a nice finished look without having to use another blade .
Question:	Do the blades get hot fast,I have seen this mentioned on other less known sites
Answer:	What do u mean? A 10 blade is one blade
Question:	I have an AUSTRALIAN labradoodle with a wavy coat. I'm considering these clippers for home grooming. What else to get in addition to the clippers
Answer:	Andis makes 4 'skip tooth' blades; #7FC (3.2mm), #5 (6.3mm), #4 (9.5mm), and 3 3/4 (13mm=1/2") which have a coarser blade guide which enables cutting of very dense fur/hair and especially matted hair. The #10 blade that came with my Andis AG2 was useless in clipping my Standard Poodles dense hair and I found the 3 3/4 'skip tooth' as the ideal solution to clip her hair down to a more usable length whereby the 'standard #10' clipper blade could be used to get a nice finished cut. My 3 3/4 arrived new unlike some who complained about receiving a 'used blade'. Highly recommend if you are frustrated with the more conventional Andis cutter blades - use a skip tooth blade to get started!

Product description

Lightweight, five-speed rotary motor provides MORE control - up to 4, 500 strokes per minute

detachable blade design for easy cleaning and greater versatility from a wide range of blade choices

perfect for all coats and breeds

soft-grip design for comfort and sure handling

ceramicedge blade stays up to 75% cooler than steel, provides increased durability and a long-lasting edge

• Powerful, rotary motor clipper for complete animal grooming. Rotary Motor 120 Volt, 60 Hertz, MAX 4500SPM
• Variable, 5-speed clipping
• Detachable blades for easy changing and detachable blades for easy changing and cleaning
• New anti-slip soft grip housing is contoured to fit your hand.Body Material:Polymer
• Includes Ceramic Edge #10 blade

User questions & answers

Question:	Hello, why it said one size on the images, and other size on the descripcion, i what to buy it but i needbto inow that and, need to know if have 5 sp
Answer:	Not sure about the question. But if you are asking about blade size... it may come with a # 10 blade but you can purchase other sizes and the # 10 can come off and you can put on a # 7, 5, 4 , 15, 30 , and #40.
Question:	Can I use pet grooming clippers on humans
Answer:	You can but the lengths are different as far as the blades go. I’d just get human clippers instead of spending more for animal clippers.
Question:	Will this work on a large blue merle Australian Shepherd? His hair is very thick
Answer:	It can work. But get hot after use a while . Be careful the hot blade will hurt the dog skin . I tried to shave my long hair poodle Also feel too hot of the blade
Question:	what are the speeds
Answer:	2500 to 4500 SPM. That being said, when it comes to getting through a coat, torque is more important than speed.

Product description

A powerful, rotary motor clipper for complete animal grooming. Variable 5-Speed clipping - use lower speeds for cooler running and clipping around sensitive areas and higher speeds for a prettier coat finish. Soft-grip anti-slip housing for comfort and safety. Detachable blades for easy changing and cleaning. CeramicEdge blade runs cooler and lasts longer.

• Powerful, rotary motor clipper for complete animal grooming
• Variable, 5-speed clipping
• Detachable blades for easy changing and detachable blades for easy changing and cleaning
• New anti-slip soft grip housing is contoured to fit your hand
• Includes Ceramic Edge #10 blade

User questions & answers

Question:	I need a new blade drive. It didn’t come with one like my past Andis clippers did. Can anyone steer me in the right direction of which blade drive to
Answer:	I've never used ceramic blades yet, but it is my understanding ceramic blades stays sharper longer and does not get as hot as the steel blades. You still have to use the coolant spray on both types of blades. Hope this helps.
Question:	Mine get hot hot in 3 minutes, what caN I do about it? o
Answer:	2700 strokes per minute.
Question:	where is the on/off switch located on this model
Answer:	Kit contains plastic parts to adjust length. So I think you don't need another blade.
Question:	This says clipper set. What is in the set? What size blade does it come with
Answer:	I have a standard poodle, and it works wonderfully! This is the third or fourth pair of clippers I've tried, and it's the only one that worked at all. I don't use the guards on it though, as they tend to get stuck in the curls. If you were diligent and combed them all through thoroughly, then it might work, but I generally just buzz him down really short for the summer. Hope that helps!

Product features

Best for: Professional animal grooming

A powerful, rotary motor clipper for complete animal grooming. Variable 5-Speed clipping - use lower speeds for cooler running and clipping around sensitive areas and higher speeds for a prettier coat finish. Soft-grip anti-slip housing for comfort and safety. Detachable blades for easy changing and cleaning. CeramicEdge blade runs cooler and lasts longer.

Includes CeramicEdge Size 10 Blade

For a clippers that get a workout all day long, consider Andis CeramicEdge blades. Our advanced formula ceramic cutter stays up to 75% cooler than steel and provides increased durability and a long-lasting edge.

Detachable blades offer ultimate grooming versatility

Detachable blade for ease of changing and cleaning. The Andis ProClip Excel 5-Speed Detachable Blade Clipper works with all UltraEdge, CeramicEdge and ShowEdge blades - the largest selection in the industry. Also works with Oster A-5 blades (all sold separately).

Easily cuts thick coats

This heavy-duty clipper uses a superior rotating motor that is powerful enough for thick coats and provides consistent cutting for dogs such as poodles, terriers, spaniels and their breed mates. It stays cool, unlike the magnetic motor design. Forget about loud magnetic motor clippers that bother your animals.

How do I remove matted fur with a clipper?

Removing mats can be achieved by using the Andis ProClip Excel 5-Speed Detachable Blade Clipper paired with a #10 blade. For a large to medium size dog with a lot of thick fur, you will need to invest in other blades. If you are planning to shave your dog, get a couple of #7FC blades, #64121.

Product description

For a dependable, long-life blade, look no further than Andis CeramicEdge blades. Our exclusive carbonized hardening process keeps blades sharper for a longer time. Add a special chrome finish that inhibits corrosion and you have cutting solutions that will last for years.

• Ceramic cutting technology runs cooler, stays sharper longer.
• Fits all Andis detachable blade clippers in these series: AG, AGC, BDC, BG, DBLC, FHC, MBG, SMC
• Carbonized steel extends edge life.
• Chrome finish resists rust.
• Leaves hair 1/8" (3.2mm)

User questions & answers

Question:	Do you still have to oil ceramic blades
Answer:	yes and clean them with a brush too. makes them wear a little better. I oil them before use and then again after cleaning.
Question:	What size of blade should I use for my Siberian Cat with badly matted hair
Answer:	I am a groomer and I would not use a skip tooth blade on a cat. Their skin is paper thin. Use a 7 blade to take off the mats. Be careful to keep the skin taught so the skin doesn't catch in the blade. You can use a 10 to finish once the mats are off but it's easy to cut the skin with a 10 blade on a cat so that's why I don't recommend starting that way. The 7 is safer. It will give you a slightly fuzzier finish; the 10 will give you the very smooth lion cut finish.
Question:	Will this blade work on Andis AGC Super 2-Speed Professional Animal Clipper with Locking Blade
Answer:	Will this blade work on my Andis RACD model easy clip??
Question:	What is the difference in the blades? Length of cut? How do you know which to order
Answer:	The higher the number, the shorter the cut. A 7 leaves hair longer than a 10, but not as long as a 4. Most groomers use a 7 more than any other blade.

Product description

The Andis Pet Ultra Edge Size is hand lapped, polished, and finished for superior cutting and specially hardened for long life. The Chrome finish resists rust and helps keep blades at optimum performance and the blade fit all Andis AG, MBG, and Oster A-5 models

• UltraEdge blades are constructed of carbonized steel for long edge life.
• Chrome finish resists rust.
• Fits Andis model detachable blade clippers: AG, AGC, AGP, AGRC, AGCL, AGR+, AGRV, DBLC, MBG, SMC
• Fits Oster A5 and Wahl KM Series
• Always oil blade before, during and after each use

User questions & answers

Question:	I accidentally ordered this blade for using on a human hair. this blade is 1.5mm only than any blades. So can it applied on human hair? or pets only
Answer:	The blade is a number 10 and there is only one blade.
Question:	what does "FC" mean
Answer:	I have a MaltesePo and it works pretty well on him.
Question:	Does the andis # 10 blade come with both blades
Answer:	If you mean the nails, no. This product is great for trimming fur and fur on paws (I have a miniature schnauser).
Question:	what is the difference between the skip tooth and the fc- finish cut
Answer:	As far as I know, this is 120V only. So are my Oster dog clippers. In the U.S. it's rare to find a small appliance rated at 240v.

Product description

Andis EasyClip Groom Detachable Blade Clipper Kit - Blue, Pet Grooming, MBG-2 (21485)

• Powerful rotary motor clipper kit for grooming dogs with heavy coats.
• Detachable blades are easy to change and clean.
• Break-resistant housing and 12' heavy-duty cord.
• Built to withstand years of use.

User questions & answers

Question:	Can you buy different blades? i do not like the combs. i have a german shepherd/ husky/wire hair cairn terrier mix. the combs leave a comb look to her
Answer:	You can buy different blades as long as they are Andis blades. Nothing else seems to fit it.
Question:	would these work for a 70 lb border collie with a very fine, thick undercoat
Answer:	I am not sure but I used this for my 30kg golden retriever (also thick undercoat but not so fine hair) n it works great. My mom enjoys shaving my golden's hair with it to different style; one day lion, another time bart simpson, sometimes skunk. I bought a few clipper head to vary the length depending on the weather. My golden seems to b comfortable too. He falls asleep during haircuts.
Question:	How does this clipper (#21485) differ from the Andis clipper
Answer:	From the Andis company, I was told that the 21485 was blue and the 65785 was purple. I am going to check to make sure that they both are detachable blades. That is one of the differences I have found with other Andis razors. But, I believe that they are identical. Oh, I forgot, they both have steel blades and not the Ceramic. To order one with a ceramic #10 blade included, it is Andis 21420. The identical clipper MGB2 model number is the same for all 3 of these razors.
Question:	what blades does it come with and do you need a special oil for it
Answer:	Blades are 3/8, 1/4, 5/8, 3/4, 1/2 comes with oil. Or can purchase human hair clipper oil. I love these for my long haired cats. Quite.
Question:	why are people wanting the ceramic blades over the metal
Answer:	I've never used ceramic blades yet, but it is my understanding ceramic blades stays sharper longer and does not get as hot as the steel blades. You still have to use the coolant spray on both types of blades. Hope this helps.
Question:	what is the strokes per minute
Answer:	2700 strokes per minute.
Question:	I have a shih tzu. What size additional blade do I need to order for a longer winter cut? The #10 blade is way too short
Answer:	Kit contains plastic parts to adjust length. So I think you don't need another blade.
Question:	how would it work on a standard poodle
Answer:	I have a standard poodle, and it works wonderfully! This is the third or fourth pair of clippers I've tried, and it's the only one that worked at all. I don't use the guards on it though, as they tend to get stuck in the curls. If you were diligent and combed them all through thoroughly, then it might work, but I generally just buzz him down really short for the summer. Hope that helps!

Product features

Best for: Professional animal grooming

This high speed, durable and versatile clipper is perfect for complete animal grooming. Cool-running smart design eliminates fans and vents that can become clogged with hair. A locking switch ensures that clipper will not accidentally shut off. Detachable blades for grooming versatility and cleaning – compatible with all UltraEdge, CeramicEdge and ShowEdge blades. Break-resistant housing. 14 feet heavy-duty cord allows you to move easily around animals and equipment. This single-speed clipper is also a great option for beginning groomers and at-home groomers because the blade will stay cooler longer on the lower speed setting.

Includes UltraEdge Size 10 Blade

For a dependable, long-life blade, look no further than Andis UltraEdge blades. Exclusive hardening process keeps blades sharper for a longer time. Add a special chrome finish that inhibits corrosion and you have cutting solutions that will last for years.

Detachable blades offer ultimate grooming versatility

Detachable blade for ease of changing and cleaning. The AGC 1-Speed Detachable Blade Clipper works with all UltraEdge, CeramicEdge and ShowEdge blades - the largest selection in the industry. Also works with Oster A-5 blades (all sold separately).

Easily cuts thick coats

This heavy-duty clipper uses a superior rotating motor that is powerful enough for thick coats and provides consistent cutting for dogs such as poodles, terriers, spaniels and their breed mates. It stays cool, unlike the magnetic motor design. Forget about loud magnetic motor clippers that bother your animals.

How do I remove matted fur with a clipper?

Removing mats can be achieved by using the Andis AGC 1-Speed Detachable Blade Clipper paired with a #10 blade. For a large to medium size dog with a lot of thick fur, you will need to invest in other blades. If you are planning to shave your dog, get a couple of #7FC blades, #64121.

Best for: Grooming dogs of all sizes at home.

Grooming your dog is easy, calm, and enjoyable with the Andis EasyClip Groom Detachable Blade Clipper. The powerful rotary motor is quiet to keep your pet calm. Built to withstand years of use, the break-resistant housing is contoured to fit your hand, making grooming a comfortable experience for you and your dog. Powerful rotary motor clipper kit is great for grooming dogs with heavy coats. Detachable blades for ease of changing and cleaning.12 feet of heavy-duty cord for everyday use. Includes 4 attachment combs sizes 1/8", 1/4", 3/8" and 1/2".

Detachable Blade Kit

Detachable Blade Kit has four different attachment combs sizing 1/8", 1/4", 3/8" and 1/2".

Detachable blades offer ultimate grooming versatility

Detachable blade for ease of changing and cleaning. The Andis EasyClip Groom Detachable Blade Clipper works with all UltraEdge, CeramicEdge and ShowEdge blades - the largest selection in the industry. Also works with Oster A-5 blades (all sold separately).

Easily cuts thick coats

This heavy-duty clipper uses a superior rotating motor that is powerful enough for thick coats and provides consistent cutting for dogs such as poodles, terriers, spaniels and their breed mates. It stays cool, unlike the magnetic motor design. Forget about loud magnetic motor clippers that bother your animals.

What are the best blades to use on a Miniature Schnauzer?

This kit comes with a Size 10 blade which cuts hair short and is great for belly and sanitary areas. Because this clipper has detachable blades, all Andis UltraEdge, CeramicEdge and ShowEdge blades will work. A Size 6FC blade (#63155) is great for setting the pattern on Miniature Schnauzers.

Product description

Andis(r) endurance(r) detachable blade grooming clipper the Andis(R) endurance(r) detachable blade grooming clipper features a high-endurance brushless motor that delivers more power and lasts longer than standard clippers -- up to 10, 000 hours. It's ideal for high-volume grooming on all hair types, including dog, cat, horse, and livestock. Features: lightweight design constant speed technology delivers power and torque for the toughest grooming jobs brushless motor delivers more power 3, 000 and 3, 800 strokes per minute 2-speed design with higher top speed for a smooth cut detachable blade design for easy cleaning and greater versatility; Use any Andis detachable blade (Sold separately) Includes carbon steel Ultra edge #10 blade 17-foot heavy-duty swivel power cord one year manufacturer warranty item Specifications: Motor type: Rotary strokes per minute: 3000-3800 volts: 100-240 frequency: 50-60 Hz

• Lightweight design
• Constant speed technology delivers power and torque for the toughest grooming jobs
• Brushless motor delivers more power
• 3, 000 and 3, 800 strokes per minute
• 2-Speed design with higher top speed for a smooth cut

User questions & answers

Question:	What is the return policy
Answer:	sure
Question:	Is this clipper good for thick curly coats, like bichon frise or poodles
Answer:	Yes. This clipper will work but you need to make sure you are using the correct blade. Here are some blades to use. Remember the lower the blade number the longer the cut, the wider the gap between the teeth on the blade to go through the hair/fur. 64080# 7 skip tooth 1/8inch will leave the hair choppy looking but will help with the thick hair, will have to go over the hair again with the regular #7 blade which is 64121 finish cut 7 blade. 64079 5 skip tooth ¼ inch finishing blade 64122 5FC blade 1/4 64090 4skip tooth blade 3/8 inch finishing blade 64123 #4FC 64133 3 ¾ skip tooth blade leaves hair ½ inch finish blade 64135 3 ¾ FC blade You can just use the FC blades but just in case the dog is matted I would suggest to go through them with the skip took. Hope that helps.
Question:	Blade drives
Answer:	Unsure of you question, but if you if you notice that your blade is dragging through the coat while clipping, or the clipper isn’t cutting as clean as before and you see lines in the coat, you may need to replace the blade drive. First, always make sure you clean off all debris from your blade and use Andis Oil to lubricate it, then check to see if you still are seeing the same issues. If you do, then you will need to replace your blade drive. Blade drives are a common maintenance point on any pair of clippers and are typically replaced every four to six months or sooner based on the amount of clipping. Note that your blade drive will wear out faster if you clip a dog with a dirty or matted coat. It’s recommended that you always bathe, dry and brush out the dog first before you begin clipping to ensure the best groom and less wear on your clipper.
Question:	Which guards fit these clippers best
Answer:	any of the combs that attach over the detachable blade properly

Product description

Andis ProClip 2-Speed Detachable Blade Clipper, Professional Animal Grooming, AGC2 (22340)

• Cool and quiet running.
• Perfect for professional, complete horse grooming.
• Detachable blade design for ease of changing and cleaning.
• Includes extra wide UltraEdge Size T-84 Blade.
• Super two-speed rotary motor for performance that pros demand.
• 14' heavy-duty cord for ease of movement around animals and equipment.
• Shatter-proof housing.
• Includes durable hard case and instructional video USB

User questions & answers

Question:	Does it come with any blades? Which blades do I need to groom Yorkies
Answer:	Mine came with the T84 blade. Andis has different size blades that you can interchange. Not sure about Yorkies I use mine on horses.
Question:	Can I interchange this blade with #10 oster clipper blades that I already have
Answer:	Yes you can they fit on just like the oyster clippers
Question:	What is the best blade for an extremely thick and long undercoat? I have a rough collie and the blades that came with it don't work well at all
Answer:	It should work fine on that type of collie, I would try a 10 blade. And make sure they are washed/dried and brushed out before you clip them. The 10 blade will make it short though.
Question:	Could I use these to "shape" the body of a Bichon Frise ? Will they remove the top layer of the coat cleanly
Answer:	The blades are fairly wide. I use mine to body clip my horse, but i've also shaved my friends cat(a Maine Coon with hair mats), so I'd say yes, they're fantastic clippers, i've never had a problem with them, just keep them clean and oiled. If you're wanting to do detail work, they're fairly wide, but they cut clean and even. they run quietly too, and don't get overheated too fast.

Product description

Andis AGC 1-Speed Detachable Blade Clipper Kit, Professional Animal Grooming, AGC (22545)

• Cool-running smart design eliminates fans and vents.
• Locking switch ensures that clipper will not accidentally shut off.
• Break-resistant housing.
• 14' heavy-duty cord. Body Material - Polymer. Finish - Black. Motor Type - Rotary. Strokes per Minute- 2700 spm. Volts - 120 V. Frequency - 60 Hz
• Powerful single speed motor clipper with 2700 spm blade speed

User questions & answers

Question:	why are people wanting the ceramic blades over the metal
Answer:	Yes it does
Question:	what is the strokes per minute
Answer:	This is the worst clippers I have ever brought. It's to heavy , worst design ever, it's way to long, cuts uneven. I can't even give it away!!!!
Question:	I have a shih tzu. What size additional blade do I need to order for a longer winter cut? The #10 blade is way too short
Answer:	Yes
Question:	how would it work on a standard poodle
Answer:	The stands are interchangeable. So either clipper works on both stands

Product features

Best for: Professional animal grooming

This high speed, durable and versatile clipper is perfect for complete animal grooming. Cool-running smart design eliminates fans and vents that can become clogged with hair. A locking switch ensures that clipper will not accidentally shut off. Detachable blades for grooming versatility and cleaning – compatible with all UltraEdge, CeramicEdge and ShowEdge blades. Break-resistant housing. 14 feet heavy-duty cord allows you to move easily around animals and equipment. This single-speed clipper is also a great option for beginning groomers and at-home groomers because the blade will stay cooler longer on the lower speed setting.

Includes UltraEdge Size 10 Blade

For a dependable, long-life blade, look no further than Andis UltraEdge blades. Exclusive hardening process keeps blades sharper for a longer time. Add a special chrome finish that inhibits corrosion and you have cutting solutions that will last for years.

Detachable blades offer ultimate grooming versatility

Detachable blade for ease of changing and cleaning. The AGC 1-Speed Detachable Blade Clipper works with all UltraEdge, CeramicEdge and ShowEdge blades - the largest selection in the industry. Also works with Oster A-5 blades (all sold separately).

Easily cuts thick coats

This heavy-duty clipper uses a superior rotating motor that is powerful enough for thick coats and provides consistent cutting for dogs such as poodles, terriers, spaniels and their breed mates. It stays cool, unlike the magnetic motor design. Forget about loud magnetic motor clippers that bother your animals.

How do I remove matted fur with a clipper?

Removing mats can be achieved by using the Andis AGC 1-Speed Detachable Blade Clipper paired with a #10 blade. For a large to medium size dog with a lot of thick fur, you will need to invest in other blades. If you are planning to shave your dog, get a couple of #7FC blades, #64121.

Product description

Andis 9-Piece Clipper Combs for Samll Pets, Blue (12860) The combs are spring loaded and must follow the steps below. 1. Clip comb onto the blade 2. Pull up and over the teeth of the blade

• Universal snap-on clipper comb set is available in small size to meet the needs of any groomer
• Smooth, high quality plastic combs glide through coats, helping you achieve great results. Attachments snap on and off easily. To use, place the hooks of the metal clip on the attachment on to the base of the clipper blade. Then push the attachment comb up and over the teeth of the blade. To remove, reverse the process
• Fits Andis detachable blades size 30, 15, 10 and 9
• Fits Andis, Conair, Master Grooming Tools, Oster and Wahl detachable style blades
• Set contains 9 sizes (1/16-inch, 1/8-inch, 3/16-inch, 1/4-inch, 5/16-inch, 3/8-inch, 7/16-inch, 1/2-inch and 9/16-inch)

User questions & answers

Question:	Groomer attached the comb for me but I can't get them on & off. I know there is a spring but I can't get it to move, Can anyone please help
Answer:	To put it on: Insert the comb from the top edge of the clipper/trimmer, and then pull it down to extend the spring to snap in and ON. To remove or take off the comb: Push the comb down and pull OUT from the bottom, and then pull UPWARD to completely remove it.
Question:	I'm new to grooming (i.e. non-professional). My clipper came with a #10 blade - is it better/safer to buy these comb guards versus individual blades
Answer:	Blades are more dangerous. It depends on your skill, because with or without guard combs you can still cut the dog. As a non-professional it will be less risk to learn with guard combs first. Blades alone need to be checked for the temperature and cooled frequently throughout the groom. A #10 blade is NOT a surgical blade, but it does leave the hair extremely short (1/16 in.), a length short enough to leave razor bumps and ingrown hairs. Its not reccomended to shave a pet down to this length all over in most circumstances. Depending on the coat, individual blade may leave a more polished look, but you can achieve a decent haircut on most breeds using a #10 blade and a variety of guard combs.
Question:	Will the attachments fit my Andis 2 speed Detachable plus + Model AG
Answer:	These do NOT FIT Andis Super AG2 2-Speed Detachable Blade Clipper, Professional Animal Grooming, AG-2 (22235). I bought them from the recommendation and am returning now!
Question:	I got the Andis AGC 2-Speed clipper with a #10 blade, and this does NOT fit??? What am I doing wrong here
Answer:	I also was ready to return these. I had read these answers but still could not see how to attach the combs. As I was preparing the return authorization I got them out again and only then did I realize that the metal piece will slide up and down, so after you hook it on the bottom part of the clipper, you then have to exert great force to move the comb up and over the blade. It is a very tight fit and does ensure that the comb will not come off during use. It would be very helpful if the package came with instructions, as it is not intuitive, even after I did what I thought was thorough research.

Product description

Andis Ultra Edge 2-Speed Dog Clippers offer fast, quiet operation and superior performance. These low-maintenance grooming clippers come in four colors for a sleek, modern look. Includes a #10 blade.

• Shatter-proof housing fits comfortably in your hand
• Clipper comes equipped with an Ultra Edge Blade
• Works with all Ultra Edge and Ceramic Edge blades (sold separately) - the largest selection in the industry, Blade needs to be oiled regularly
• Designed and manufactured for years of reliable use

User questions & answers

Question:	Does it come with combs? The Andis website says that this model (22585) does, but I don’t see it in the description
Answer:	Yes we use it on the cars and boat.
Question:	does it come with oil for the blades. what butane should i use
Answer:	Hi Ann! Thank you for your question. No, the 3M 35928 Marine Finesse-It II Glaze would not be the appropriate product for your application. We would suggest contacting a marble counter top manufacturer for a product recommendation.
Question:	Does this run cool
Answer:	Yup, Finesse-it is the last step in the compounding/polishing process. It leaves a nice shine then you simply wax over it. It's color-sand if necessary then compound then Finesse-it for gelcoat (what I use it for). Good luck.
Question:	I have a 10 blade on my Andis ultra edge. Do I need a different blade to give a summer cut to my collie/australian shepherd
Answer:	Thank you for your question! The 3M 36111 Perfect-It Gelcoat Light Cutting Polish + Wax is formulated to remove light to medium oxidation, swirl marks and scratches of P1500 or finer; leaving a smooth, high gloss wax finish. Oxidation of gelcoat surfaces can be assessed by the degree to which the white “chalk” transfers to the fingertip upon touch. Typically, light oxidation has virtually no transfer of the white “chalk” upon touch; whereas medium oxidation has partial (although not heavy) transfer upon touch.

Product description

The Pulse Li 5 cordless clipper features 5 cutting lengths in 1 removable blade – adjustable from 40-9. Perfect for trimming and touch-ups. The lithium-ion battery delivers over 2 hours of run time and charges in 90 minutes. Cord/cordless feature allows for uninterrupted trimming.

• Cord/cordless feature for uninterrupted grooming
• Lithium-ion power mated with powerful rotary motor to cut through single-coated breeds
• Blade adjusts from size 40 to 9 for cutting versatility
• Lightweight for greater comfort - weighs less than 10oz
• Please oil blades before and after for best results
• Included Components: Shears

User questions & answers

Question:	What is the product charger voltage
Answer:	the one that came with it is - Input:100-240V - 50-60hz 7.5w and the Output: 4.5V - ---1.2A that is what is on the charger.
Question:	Will the Andis 50ss blade that leaves hair up to 0.2mm short fit this clipper
Answer:	It does not fit detachable blades
Question:	Does this clipper come with an extra blade? If not can you post the link to purchase an extra blade
Answer:	No it does not. It is not a detachable blade. The blade it comes with has different sizes in one blade.
Question:	are these quiet, low vibration for spooky horses
Answer:	Ummmm, I felt they were like all other clippers

Product description

The and is 7 - piece premium AG clip comb set is color coded for easy identification. Metal clip securely attaches to blade. Fits and is ultra edge and ceramic Edge Size #10 blade. Sizes #7, #5, #4, #2, #1, #a, #E (1/16", 1/8", 1/4", 3/8", 1/2", 3/4", 1")

• Color coded for easy identification
• Metal clip securely attaches to blade
• Fits Andis Ultra edge and ceramic Edge Size #10 blade
• Sizes #7, #5, #4, #2, #1, #a, #E (1/16", 1/8", 1/4", 3/8", 1/2", 3/4", 1")

User questions & answers

Question:	Will these work on a Havanese coat
Answer:	Yes, they should work great on Havanese, as long as they are brushed well and not matted, and you have good dog clippers. I have a Coton de Tulear and a Golden doodle. The clips work great for keeping their coat longer.
Question:	Will this fit my andis agc
Answer:	Yes
Question:	Will these work with the andis headliner model ls
Answer:	If your voter takes an A5 blade, yes
Question:	Are these plastic or stainless steel
Answer:	I just got these a month ago. They are plastic with a steel spring clip. I like them so far, very durable. I use them for fitting show goats...heavy duty use.

• 【Self-Sharpening Precision & Safe Blade】AIBORS dog clippers construct with high-carbon blades remain sharp for smooth grooming that creates a snag-free cutting and pleasant experience for your pet. R-shaped clog-proof blade will make your pets safer. Pro quality at home means less trips to the professional dog groomer.
• 【 3 Hour Run Time】Dog clippers for grooming built-in 2000mAh High Capacity Li-ion Battery, charging for 3-4h hours and can sustain use of 3 hours. Cordless design, allowing you to freely move in any direction, easy to handle the hard-to-reach spots. But also available for cord.
• 【Low Noise & Low Vibration】Dog grooming clipeprs for thick coats with Heavy-duty gear for proper powerful cut, with stable and steady control. This dog hair clipper provides substantial power and speed without producing additional heat or noise to keep pets calm and enjoy grooming.
• 【Easy to Use】Pet clippers with 4 adjustable(3mm/6mm/9mm/12mm) guide combs are applicable for clipping the hair of different lengths; Go with the 4 precisely(0.5mm/1.3mm/2.0mm/2.5mm) trimmer blade. Now you can safely shaver your pet even if you've never done it before without fearing cutting your pet.
• 【One Year Warranty】1 Year after sale for pet trimmer! Just contact us if you are not satisfied. Dog grooming kit includes all tools your pets need. Including pet electric clipper, guide combs, Stainless steel scissor and comb, cleaning brush, oil. Perfect for all coats and breeds, such as cats, dogs, sheep, horse ect.

User questions & answers

Question:	Will the blade on this shave a German Shepherd's dense coat
Answer:	Hi Carlos! Thank you for your question. No, the 3M 36112 Perfect-It Boat Wax would not be the appropriate product for your application. We would suggest contacting Sea-Doo for a product recommendation.
Question:	What type blade does these shears take
Answer:	The Perfect-it 36112 wax worked well on the faded decals on my RV. The white gelcoat was previously polished with Perfect-it 36106 medium compound/wax and it left some residue on the faded decals. The 36112 wax removed the residue and brought back some of the color in the decals.
Question:	Would this work on Australian Shepard dog
Answer:	I used the glaze to buff outa solid surface shower. We used a 6 inch random orbit shower. The previous process left some swirl marks. Difficult to remove but got them out.

Product features

AIBORS Pet Clipper Grooming Kit

AIBORS dog grooming kit has everything you need for trimming and full body clipping. The professional pet clippers can cuts through the thickest of coats easily.

The dog hair clippers features high quality high carbon stainless steel blades that stay sharper longer. Dog clippers blades exceptional fur feeding to protect your pet from pulls or cuts.

The clipper is designed with a LCD display, real-time display the power of the Li-ion rechargeable battery, helping you control the work better.

Sharpening Precision & Safe Blade

• Safe and Sharp Blade, suitable for many different types of pet hair, saving time and energy.
• The dog clippers constructed with high carbon steel blade, the sharp and multi-sized blade will shave your pet's hair smoothly and comfortably without overheating.
• Our professional dog grooming clippers has an adjustable blade cutter head, which can adjust the length 0.5/1.3/2.0/ 2.5mm.

Heavy Duty Powerdrive Motor

• AIBORS professional electric dog trimmers with heavy duty strong motor(6500r/min). High rotating speed motor provides strong and lasting power to the running blades, which means trim thick hair without blocking, snag or pull.
• Dog grooming kit is perfect for cutting any size and any hair.

Wireless and Rechargeable

• Rechargeable dog clippers with built-in 2000mAh battery. It can be used cordless and also used when charging.
• Dog Shaver Clippers charging for 3-4 hours and can sustain use of 180mins.
• Pet clipper can support cord Voltage: 100V-240V 50/60H, you can't be interrupted due to weak battery.