12 best dewalt countersink sets

Product description

3 Piece, Countersink Set, Rapid Load System, Durable Rubber Finger Grips For Comfortable Use, Impact & Rust Resistant Nickel Plated Nose, Stainless Steel Interior Parts & Pressure Activated Ball Groove System For Rapid Loading & Strong Retention, Provides Quick & Easy Accessory Changes Without Rechucking, Accessories Have Hex Shank Locking System To Prevent Slipping, Holder Fits All Brands Of 3/8" & 1/2" Cordless & Corded Drills.

From the Manufacturer

DEWALT DW2535 3 Piece #6, #8, and #9 Countersink Assortment

• The product is 3PC Countersink Set
• Easy and simple use kit
• The product is manufactured in China
• Drill, countersink and counterbore in one step
• Four cutter countersink and tapered drill bit provide superior speed and ideal finish
• Replacement tapered bits offered

User questions & answers

Question:	If I'm using 3/4 inch screws that would require me to tighten the countersink onto the threaded section of the bit is that ok
Answer:	There is no easy way to do it using this kind of packaging. If you buy the bigger spools, you can just put some kind of axle through the larger spool and let the line unwind straight onto the trimmer spool with zero twisting. One way to minimize twist from this type of packaging is to make sure to wind your spool the opposite way that the line is coiled in the package. If the package is coiled clockwise, wind your spool counter-clockwise. I have a gas trimmer, so I load from the center of the trimmer line out. My spool holds 8 arm's lengths of line, so I measure out 4 arm's lengths of line and start winding from that point instead of measuring out the whole 8 arm's lengths then finding the center and winding. There are much fewer tangles and mess that way.
Question:	Are these impact driver ready
Answer:	Hello there, Yes, it will work with the string trimmer from combo pack STBA40B210.
Question:	what size works for drywall screws
Answer:	Hello there, No, this is a dual line spool replacement. Model 21332 is a single line unit. Here is the compatible spool replacement model 29252: https://www.amazon.com/Greenworks-065-Inch-Trimmer-Replacement-29252/dp/B004EPXIA6/ref=sr_1_1?s=lawn-garden&ie=UTF8&qid=1528466445&sr=1-1&keywords=29252
Question:	what size plug cutter do i need for this set
Answer:	Hello there, No, it will not. Model 2101202 comes with a quick-load trimmer head. Simply use trimmer line at .080" in diameter and rewind the existing spool yourself. Here's a video on how this can easily be done: https://www.youtube.com/watch?v=YgVkrrx9gLg We hope this helps.

Product features

DEWALT DW2535

- Drill, countersink and counterbore in one step

- Replacement tapered bits offered

- Four-cutter countersink and tapered drill bit provide superior speed and ideal finish

- The product is 3PC Countersink Set

- Easy and simple use kit

Product description

DEWALT DWADTQTR5SET Impact Ready® 5pc Drill Tap Set 1/4" Capacity features a 1/4" hex shank for use in impact drivers. This item allows you to drill, tap, and countersink all in one step; capable of working with up to 1/4" thick material capacity. Commonly used by Elevator Installers, Mechanicals, Electricians, Glaziers. Includes: 8-32 UNC, 10-24 UNC, 10-32 UNF, 12-24 UNC, 1/4"-20 UNC.

• Features a 1/4" hex shank for use in impact drivers
• Drill, tap, and countersink all in one step
• Up to 1/4" thick material capacity

User questions & answers

Question:	What size/type of screws should be purchased for use with the 5 different sizes listed in this set
Answer:	Standard threaded machine screws from size #8 to 1/4" as listed in description. Any type head.
Question:	What's the difference between this set dwadtqtr5set and dwadt5set ? they seem to be the same sizes with same features. one is cheaper
Answer:	I have both sets the only difference between the two is the length of each bit. The DWADTQTR5SET are designed to drill, tap and deburr up to 1/4 inch thick material. DWADT5SET is designed for thinner material.
Question:	Do you have to use an impact driver for these? What about cutting oil
Answer:	Unless you like breaking bits off use an impact driver and oil unless you are only tapping 1 hole. I go through these lie water. At first I was only getting about 5-10 taps per bit. If i put a couple of drops of tap magic oil every 5 taps or so i get between 100-150 per bit. I do predrill my holes to extend the life of the taps.
Question:	What is the material the bits are made from
Answer:	Material M2 HSS

Product description

The DEWALT DWADT5SET 5pc Drill Tap Set is designed to be used with impact drivers. These drill taps allow you to drill and tap holes in one application, and also deburr and countersink in one step. They all offer a speed tip which penetrates material quickly, along with a hex shank for use in impact drivers.

• Designed for impact drivers
• Drill and tap holes in one application
• Deburr and countersink in one step
• Speed tip for quick penetration

User questions & answers

Question:	what are the sizes
Answer:	The sizes are:8-32, 10-24, 10-32, 12-24, 1/4-20
Question:	How big is the shank diameter
Answer:	The bit diameter is 1/4.
Question:	Do these come in a case
Answer:	No
Question:	What is the tap range
Answer:	sizes range from 8-32 to 1/4-20

Product description

Drill, Countersink and counter bore in one step. Four-cutter Countersink and tapered drill bit provide speed and finish.

Quick, professional results are easy to achieve with the DeWalt DW2567 #6 countersink featuring a 9/64-inch tapered drill bit. DeWalt's unique design lets you work efficiently, reducing three steps into one: drill, countersink, and counterbore in a single step. Additionally, the four-cutter countersink included in this set-up provides a fast, clean finish for more polished final products. And the tapered bit can be replaced easily to further extend the life of this dependable set-up. This incredibly convenient tool has a shipping weight of just three ounces.

From the Manufacturer

DeWalt DW2567 #6 Countersink with 9/64-Inch Drill Bit

• The product is #6 counter 9/64" Bit
• Easy to use
• The product is manufactured in China
• Drill, countersink and counterbore in one step
• Four-cutter countersink and tapered drill bit provide superior speed and ideal finish
• Replacement tapered bits offered
• Tapered drill bit can be replaced for extended life
• Weighs 3 ounces

User questions & answers

Question:	does it cut a pluggable 1/2" hole
Answer:	NO, it does not cut or countersink a 1/2" hole. The actual screw head size for a #6 Countersink bit is just over a 1/4" or .268 inches. There are Plugs for these hole sizes.

Product description

DEWALT Driver/Drill Bit Set, Quick Change, 8-Piece (DW2730)

Increase your drilling to driving efficiency with the DEWALT DW2730 8 piece drill and drive set. Equipped with a rapid change system, this set makes the transition from boring to driving a snap – simply bore into your material, turn the tip over, and drive in your fastener.

• DEWALT drill/driver bit set, 5/16 in shank, 8 pieces, black oxide
• Provides secure connections to components and lines
• This product is manufactured in United States
• Quick and easy changes between drilling and driving
• Black oxide split-point drill bits start on contact
• Quick change mechanism for easy one-step loading
• Easy push forward for one-handed release

User questions & answers

Question:	Does the shank fit a 1/4" quick change drill
Answer:	I don't think so since it says right in the description... 5/16-inch Shank for Added Durability
Question:	Can I use this with a Ryobi drill
Answer:	It fits any drill, you just open and adjust as needed.
Question:	Can you use a impact driver with this kit
Answer:	No, you should not use this with impact tools.
Question:	Does anyone know for sure what size drill bits are included in this set! I can't believe DEWALT does not publish the information
Answer:	The bits in the set are a No. 6 & a No.8. Dewalt sells these bits by that nomenclature. They come with flat in the shaft for the set screw.

Product description

DEWALT DW2537#6 Countersink 9/64-Inch Replacement Drill Bit Only

From the Manufacturer

DeWalt DW2537 #6 Countersink 9/64-Inch Replacement Drill Bit Only

• Drill, countersink and counterbore in one step
• Four-cutter countersink and tapered drill bit provide superior speed and ideal finish
• Replacement tapered bits offered. Product consist of Drill Bit Only no tool holder

User questions & answers

Question:	Anyone know if these tapered bits can be sharpened? I have a "Drill Doctor" sharpener and was thinking of trying to
Answer:	The flutes are factory sharpened, so yes, one should be able to grind it down. You’ll lose the taper eventually but you can always use an awl before drilling if you’re worried about it walking at all.
Question:	I am looking for a drill bit like the one they use to drill the bottom of christmas trees so the tree will fit snuggly on tree stand.Any ideas
Answer:	I would think that any drill bit would work, can't see why this one would not work, but if you have other bits, can't seem your need to get this one, only if you have need for it for other jobs that you would be working on
Question:	What is the length of the bit from the tip to the hex shank (the most that can go into the wood if the collar is not installed
Answer:	the whole bit length is about 3 inches, so three inches
Question:	Is it impact ready
Answer:	No, this is not rated impact ready.

Product description

Drill, countersink and counter bore in one step

Four-cutter countersink and tapered drill bit, provide superior speed and finish

Adjustable for different screw lengths

3 piece set includes 9/64" for No 6 screws, 11/64" for No 8 screws, and 3/16" for 10 screws,

Carded

• Drill, countersink and counterbore in one step
• Four-cutter countersink and tapered drill bit provide superior speed and ideal finish
• Replacement tapered bits offered

Product description

DEWALT DW2735P drill flip drive kit, 12-piece

The DEWALT DW2735P 12-piece Drill Flip Drive Kit features high-quality bits with durable 5/16-inch shanks. The black oxide drill bits produce less walking than other drill bits for more precise, accurate drilling. The multi-cutter countersinks produce a superior finish with less chipping. The innovative quick-change mechanism ensures quick and easy one-step loading.

From the Manufacturer

12-Piece, drill drive set, quick and easy changes between drilling and driving, black oxide split point dill bits start on contact, quick change mechanism or easy one step loading, easy push forward one handed release, contoured finger grip for easy ergonomic use, 5/16-Inch shank for added durability, multi cutter countersinks for superior finish, the fastest way to drill and drive-drill hole/flip unit/drive screw, contains 1 each: drill drive holder, drill drive connector, no.6 drill bit with countersink, no.8 drill bit with countersink, no.10 drill bit with countersink, no.8 replacement drill bit, no.8 replacement drill bit and heavy duty container, 2 no.6 replacement drill bits and 3 screwdriver bit.

• Quick-change mechanism enables lightning-quick bit changes
• 5/16-inch shanks for increased durability
• Multi-cutter countersinks produce a superior finish with less chipping
• Easy 1-handed release for quicker changes
• Kit contains: drill drive holder, drill drive connector, (three) Countersink bits, (four) replacement drill bits and heavy-duty container, (three) screwdriver bits

User questions & answers

Question:	Is the hex that the drill/countersink fits into, the same size hex that the screwdriver bits fit into
Answer:	Yes, the countersink fits into one side of the Quick Change and the bits will fit into the other side.
Question:	Does this work only for soft material as wood/plastic or with metal as well
Answer:	I would not use them on Metal, Even through they do not say "Wood" only, they are not made to be used on metal.I would not use them on soft metal like aluminum.good luck
Question:	What's the outside size of this case, in the closed position? Thankx
Answer:	case is about 8"x6" (as a pocket book) and about 1" thickness
Question:	Does this work with an impact driver
Answer:	The holder is made of aluminum and not rated for impact drive use. However, I have used these many times with an impact driver with no problem. I have some of these sets that are over 20yrs old which still work. Eventually the aluminum part will begin to wear from impact driver use making it difficult to use the flip feature to swap drill for drive. The steel inserts begin to twist into the aluminum causing a jam, making it difficult to remove by hand.

Product description

DEWALT DW2701 #8 Drill Flip Drive Complete Unit

From the Manufacturer

Dewalt DW2701 #8 Drill Flip Drive Complete Unit allows for quick and easy changes between drilling and driving, letting the user finish jobs faster. These black oxide split-point drill bits start on contact, and have a contoured finger grip for easy ergonomic use. These drive units feature quick change mechanism for easy one-step loading and are easy to push forward for one-handed release. The DW2701 have a 5/16-Inch shank for added durability and is one integral unit that keeps everything together and no lost parts. The Multi-Cutter Countersinks for superior finish.

• The product is #8 drill driver
• Easy to use
• The product is manufactured in China
• Quick and easy changes between drilling and driving allows user to finish jobs faster
• Black oxide split-point drill bits start on contact
• Quick change mechanism for easy one-step loading
• Contoured finger grip for easy ergonomic use

User questions & answers

Question:	Does this have the built in allen wrench in the shank of the device? The photo shows an extension on the base and no reference to that being the wrenc
Answer:	The “Allen wrench” on the shank is just the part that goes into your drill. Nothing more.
Question:	Can you use a regular drill bit and stick it out far for 3" screws and still flip it
Answer:	Probably not. When you extend the drill bit too far it will not fit in the base and click tight.
Question:	Is the screw bit magnetic or is the holder magnetic? Will it hold all my existing screw bits properly
Answer:	The part that holds the bit is magnetized; however, there is also a little screw which takes an Allen wrench to loosen the screw. This screw hold the bit tightly into the part that holds the drill bit. I got my tool out and tried another bit and it held it tightly. I think this tool will work on all your bits. Try it. What the heck. It doesn't cost a fortune and you probably need another toy anyway.Love,Cheryl
Question:	What type of screw driver bit is included? Is it a Phillips
Answer:	It's a #2. There's a set screw that allows you to use different sizes if you want. Also, unlike some other quick change tools, this one requires two hands to switch because the collar is spring loaded (just an fyi).

Product description

One integral unit keeps everything together, no lost parts. Ergonomic contoured finger grip for comfort and more control. Quick and easy changes between drilling and driving, one step loading and multi Cutter countersinks. Easy push forward for one-handed release.

From the Manufacturer

Dewalt DW2700 #6 Drill Flip Drive Complete Unit allows for quick and easy changes between drilling and driving, letting the user finish jobs faster. These black oxide split-point drill bits start on contact, and have a contoured finger grip for easy ergonomic use. These drive units feature quick change mechanism for easy one-step loading and are easy to push forward for one-handed release. The DW2700 have a 5/16-Inch shank for added durability and is one integral unit that keeps everything together and no lost parts. The Multi-Cutter Countersinks for superior finish.

• The product is #6 drill driver
• Easy to use
• The product is manufactured in China
• Quick and easy changes between drilling and driving allows user to finish jobs faster
• Black oxide split-point drill bits start on contact
• Quick change mechanism for easy one-step loading
• Contoured finger grip for easy ergonomic use
• 5/16-inch shank for added durability multi-cutter countersinks for superior finish

User questions & answers

Question:	Is the allen key for changing bits separate or mounted in the end of the shank
Answer:	When a bit breaks you use allen key to replace it and also to fix the length of the bit to make the hole.
Question:	What does the #6, #8, and #10 size mean
Answer:	#6, #8, and #10 corresponds to the size of the screw size. When you purchase screws they say for example: 6 - 1 1/4; the 6 is related to the thickness of the screw but does not correspond to inches neather milimeters. The 1 1/4 corresponds to the length in inches. I recommend this tool it is really a time saver as it drills and by changing the tip you can screw in the screw.
Question:	What type of screw driver bit is included? Is it a Phillips
Answer:	Bit is a # 2 Phillips But any standard hex driver bit . Common , Square Drive , Cross point , clutch or star will fit
Question:	What size drill bit comes with it
Answer:	As stated in the description, this unit comes with a #6 bit and hand measuring the one I have looks to be around 1/16" diameter - so small. There are also #8 bit (~ 3/32") and #10 bit (~ 1/8") versions available here on Amazon.

Product description

DEWALT DW2702 #10 Drill Flip Drive Complete Unit

From the Manufacturer

Dewalt DW2702 #10 Drill Flip Drive Complete Unit allows for quick and easy changes between drilling and driving, letting the user finish jobs faster. These black oxide split-point drill bits start on contact, and have a contoured finger grip for easy ergonomic use. These drive units feature quick change mechanism for easy one-step loading and are easy to push forward for one-handed release. The DW2702 have a 5/16-Inch shank for added durability and is one integral unit that keeps everything together and no lost parts. The Multi-Cutter Countersinks for superior finish.

• The product is #10 drill driver
• Easy to use
• The product is manufactured in China
• Quick and easy changes between drilling and driving allows user to finish jobs faster
• Black oxide split-point drill bits start on contact
• Quick change mechanism for easy one-step loading
• Contoured finger grip for easy ergonomic use

User questions & answers

Question:	Can this be used with an impact driver
Answer:	No. It's light duty.
Question:	What type of screw driver bit is included? Is it a Phillips
Answer:	Phillips #2. That is THE most common Phillips standard size.
Question:	does this flip drill one side then flip to screwdriver
Answer:	Yes, the bit can be used to drill and then flipped and used to drive.
Question:	Can only special dewalt drill bits be used for this? is there any way to use other company's / regular drill bits with it, or do i have to buy each
Answer:	You can use different brand drill bits. However, if you can get dewalt brand bits is better. They're not that expensive.

Product description

DEWALT DWA2T40IR 40 Piece Impact Ready Screw driving Set is part of the DEWALT Flexor line of power tool accessories. Flexor allows bits to flex up to 15 degrees which equals increased durability and reduced breakage for longer bit life. This set allows you to maximize you Impact ready system. It features a 10x Magnetic Screw Lock System for strong fastener retention and is preferred by professionals everywhere. The bits are placed directly in the impact driver; No run out and allows for access areas. It also minimizes drops and reduces wobbling. This set features a full range of sizes, from 2 inch to 6 inch screw driving bits and are removable to be used across a full bit set. These bits are durable and jobsite tough. Set includes: 3/8" Untested, 1/4" Untested, 5/16" Untested, Impact Ready Sleeve, 3" Impact Ready Screw Lock Holder, 2" PH2 Impact Ready Bits, 2" SQ2 Impact Ready Bit, 2" T25 Impact Ready Bit, 2" SL8 Impact Ready Bit, 1" PH2 Bits, 1" SL8 Impact Ready Bits, 1" SL6 Impact Ready Bit, 1" PH1 Impact Ready Bit, 1" PH3 Impact Ready Bit, 1" SL10 Impact Ready Bit, 1" PH2, 1" T15 Impact Ready Bit, 1" T20 Impact Ready Bit, 1" T25 Impact Ready Bit, 1" T30 Impact Ready Bit, 1" SQ2 Impact Ready Bits, 1" SQ3 Impact Ready Bit, 1" SQ1 Impact Ready Bit, 3.5" PH2 Impact Ready Bit.

• Minimizes drops
• Reduces wobbles & breakage
• FlexTorq allows bits to flex up to 15 degrees
• 10x magnetic screw lock system
• Minimizes drops and reduces wobbling
• Reduces breakage and longer life

User questions & answers

Question:	Can I use this with regular drill (not an impact driver
Answer:	YEP! In fact, I use the speed loader to make using my regular drill/driver faster. The Magnet holds the different bits I'm going between.
Question:	are the individual bits magnetic
Answer:	The individual bits are not magnetic. The 1/4' and 5/16" adapters, the bit extender, and of course the magnetic screw holder are. If you use any of these (except the 5/16" adapter) with the bits, then the bits will exhibit magnetic characteristics as well.
Question:	where is made
Answer:	Holder and socket adapter made in Taiwan. The rest is made in Vietnam.
Question:	This may sound really dumb, but how does one remove a bit from the magnetic holder that was in its own bubble, the "magnetic screw lock sleeve
Answer:	I just got mine today. That bit pulls out from the back. I had to wiggle it around quite a bit, and then it came out. It gets easier after you do it a few times. It took me a minute to figure out how to use it. The bits push in from the back, you only use the long bits. It only made sense once I put it in my screw gun. The sleeve slides back on the bit enough to expose the tip. Then you can put a screw on it, and the magnet/sleeve holds the screw in place. That's their theory at least lol. I haven't tried it yet. It seems a little awkward, but I guess you could get used to it if you're putting in a bunch of screws.

Product features

DEWALT DWA2T40IR Impact Ready FlexTorq Screw Driving Set, 40-Piece

Designed for tough jobsite duties, the Impact Ready bits deliver the power, precision and dependability required to handle even the toughest jobs. Complete with an assortment of various bit tips and sizes commonly used on the jobsite, this bit set is the ultimate resource for any handyman, professional or DIYer.