7 best mk diamonds

Product description

This 10-Inch wet cutting tile saw is engineered for cutting tile, marble and porcelain! It has a fully enclosed and thermally protected, high torque, fan cooled motor. It has permanently lubricated, dual-sealed heavy duty blade shaft bearings and a multi-position motor post and cutting head for convenient cutting of various tile sizes. The water distribution system supplies water to both sides of the blade and also has a variable height cutting head for convenient cutting of various tile sizes. This tile saw can also accommodate 6-Inch and 8-Inch profile wheels and has a blade shaft lock for easy blade removal. Freight charges (or free shipping) is based on delivery to a commercial or industrial address in the continental USA. For residential deliveries, lift gates or signature required there may be additional fees. Note: Commercial Addresses are zoned as commercial, if you run your business out of your residence that is not considered a commercial address..

From the Manufacturer

MK Diamond 169612 new MK-101-24 10 inch wet cutting tile saw sports a 1-1/2 horse power, 120 volt Baldor electric motor. Blade capacity is 10-Inches; depth of cut 3-Inches. Features: Fully enclosed thermally protected, high torque, fan-cooled Baldor motor for safe efficient use. Permanently lubricated dual-sealed blade shaft bearings provides year of maintenance free operation. Has multi-position motor post and cutting head allows for plunge cuts and use of diamond blades smaller than 10-Inches in diameter. Accommodates MK Diamond MK-275 Series 6-Inch and 8-Inch profile wheels, which provide a clean professional contour for marble and granite. The blade shaft lock provides for easy blade removal and the linear-bearing and chrome plated guide bar assembly ensure precise cutting. The one piece steel frame is zinc plated for corrosion resistant use. Dimensions and specifications: Length of cut - 24-Inches, 18-Inches diagonally and depth of cut 3-Inches; blade capacity 10-Inches; Weight - 98 pounds; Length, Width, Height - 42-Inches x 21-1/2-Inches x 23-Inches. Accessories included with saw: 10-Inch wet cutting diamond blade, water pump and rip guide. Optional Accessories: MK Diamond's 168244 new MK-101 Stand and 155954 Tile Saw Cutting Kit.

• Engineered for cutting tile, marble, as well as porcelain and water distribution system supplies water to both sides of blade
• Fully enclosed thermally protected, high torque, fan-cooled new 1-1/2 horsepower Baldor motor
• Multi-position motor post and cutting head for convenient cutting of various tile sizes
• Variable height cutting head allows for plunge cuts and use of blades smaller than 10 inches in diameter
• Cast aluminum guards, cutting head and table with non-slip neoprene surface

User questions & answers

Question:	Would this saw be able to rip a 3x5 sheet of hardibacker down the middle
Answer:	Yes, according to my understanding. Water won't fill it up if you dive.
Question:	Will this be able to cut standard brick pavers
Answer:	They are larger than the Palau SAF, we do not know by how much, for we do not have any Palau SAF in stock to compare.
Question:	How much for the stand
Answer:	I went with the size that was closer to the maximum size of the sizing. I figured a little tighter is better. When you foot is wet, it seems like the things get looser.9- Example, if medium is 9 to 10.5 and my foot is a 10.5 then I would get the Medium. Not the next size up.
Question:	anybody bought this saw did it come with extension for table
Answer:	no, but it works just fine!

Product description

MK Diamond 155950 MK-215GL 10-Inch diameter by .050-Inch width by 5/8-Inch arbor for cutting glass and quartz. MK-215GL blades have a metal bond for general purpose cutting. MK Diamond blades for glass have been designed with an advanced bond technology for fast, free cutting of all types of glass and quartz.

• Country of Origin:China
• Package length:11.2"
• Package width:11.1"
• Package height:0.6"

User questions & answers

Question:	Can i use this blade to cut glass and marble mosaic tiles
Answer:	This will have a US 2 prong plug. It's rated for 120Volts, 50/60 Hertz. You may be able to use a transformer to drop the voltage from 220 to 120. However, my experience with transformers has never been good and a number of items have fried when I've travelled. I personally wouldn't risk it. Hope this helps.
Question:	Will this cut glass bottles if not what blade would you recommend
Answer:	I think you would have to contact the company that made the mattress heater. Name should be on the unit somewhere.
Question:	arbor size of ths blade
Answer:	No, it wouldn't work to put a twin-size on one side of a king. The pads are fitted. On those really cold nites, I bet your husband would like this product because it doesn't put out "heavy duty" heat. It seems to react to the weight of the body and just makes for a nice, warm sleep. And the dual controls will allow him to just barely warm up his side...while you toast it up!

Product description

MK Diamond 157511 MK-415 7 by .060 by 5/8 inch is a continuous rim wet cutting blade. Supreme grade tile blade. The MK-415 supreme grade, super hi-rim blade has been designed with a thicker core for high production jobs that require straight and fast cuts. The high rim provides longer life than standard tile blades of similar quality. Ideal for cutting porcelain and vitreous tile.

From the Manufacturer

Continuous super hi-rim diamond blade for wet cutting of porcelain and vitreous ceramic tile. Supreme grade.

• 7 by .060 by 5/8 inch
• Continuous rim wet cutting blade
• Supreme grade, super hi-rim blade has been designed with a thicker core for high production jobs that require straight and fast cuts
• High rim provides longer life than standard tile blades of similar quality
• Continuous super hi-rim diamond blade
• For wet cutting of porcelain and vitreous tile
• 7" diameter with 5/8" arbor
• Supreme grade

Product description

MK Diamond 153696 MK-303 10 by .040 by 5/8 inch - Continuous Rim is a lapidary blade. It is professional grade. The MK-303 Professional grade diamond blade has been designed for cutting rare and valuable materials when waste needs to be held to a minimum and speed of cut is essential. The MK-303 produces smoother cuts, lasts longer and cuts faster than notched rim or plated diamond blades. Designed for use with a water soluble coolant. Blades 16 inch and larger have segmented rims.

From the Manufacturer

MK Diamond 153696 MK-303 Professional 10-Inch diameter by .040-Inch wide by 5/8-Inch arbor diamond lapidary blade produces smoother cuts and is used for cutting rare and valuable materials when waste must be held to a minimum and speed of cuts is essential. The professional series diamond blades last longer and will cut faster than ordinary notched rim or plated diamond blades.

• 10 by .040 by 5/8 inch - Continuous Rim
• Lapidary blade
• Professional grade diamond blade
• Designed for cutting rare and valuable materials
• Produces smoother cuts, lasts longer and cuts faster than notched rim or plated diamond blades
• Professional grade lapidary diamond blade
• Used for cutting rare and valuable gem stone materials

User questions & answers

Question:	How do i request an arbor adapter when i purchase a blade? I need a 5/8in down to 1/2in
Answer:	If the mattress were too tall, I'm pretty sure the cover would stay in place whether or not the bottom elastic fully reached under the mattress or not. It seems to be pretty stable.
Question:	Will this work with a Target tile wet saw? I will be using it for lapidary as a trim saw blade
Answer:	My cords are tucked beneath the fitted sheet at the head of the bed, off the sleeping surface. I don't feel them, and it isn't an issue.
Question:	Can that brass arbor ring be punched out
Answer:	It will not work with Alexa but this is the best heated pad we have ever owned!
Question:	What is the max RPM
Answer:	We place a regular mattress pad on top of the heated pad.

Product description

MK Diamond’s MK-2001SV electric masonry saw is a powerful brick, stone, and cinder block saw that has a distinctive, innovative, open-back design. This design allows large materials to be easily cut and makes this saw an excellent choice for a wide range of heavy-duty tasks.

MK-2001SV Electric Masonry Saw At a Glance: Innovative open-back design for cutting large materials Cast aluminum structural components 1-1/2 horsepower, 115 volt motor 14.4 amps, 1,750 motor rpm, 2,540 blade rpm One-year limited warranty

The MK Diamond MK-2001SV electric masonry saw is powerful and full of helpful features (view larger.)

Powerful and Precise

The MK-2001SV electric masonry saw’s 14-inch blade capacity, 5-inch cut depth, and open-back design lets you cut materials up to 16 inches long. It has cast aluminum structural components, a jig-welded steel frame assembly, and a durable cast aluminum blade guard with stainless steel water tubes that are ready for extremes and won’t bow or rust--the stay-level blade guard also allows for a maximum cut depth at any head height. To help ensure long life and to make maintaining the saw easier, the drop down blade shaft assembly is constructed with sealed, permanently lubricated, long-lasting bearings. In addition, there is an adjustable water supply for thorough blade protection.

Ease of Use and Transportation

This saw has a convenient on/off switch to start and stop quickly and to add a level of user safety. To make plunge cutting quicker and not as difficult, the saw boasts a recoil spring return cutting head. Thanks to its lift brackets, the MK-2001SV electric masonry saw isn’t difficult to transport, and can be moved to the job site as needed.

Dimensions and Warranty

The MK Diamond MK-2001SV electric masonry saw measures 32 inches by 23 inches by 29 inches and weighs 157 pounds. It comes with a one-year limited warranty.

About MK Diamond

MK Diamond was started in San Francisco in 1868 by Joseph Musto, a fifth-generation Italian stone-cutter and tile-setter whose ancestors were renowned master craftsmen. He brought the skills of his forefathers to his new home in America and established the Musto Steam Marble Mill. The trademark of the business was its pledge to quality work and service--the Musto family always believed that good enough was never really good enough. It is in honor of this work ethic that MK Diamond continues its unrelenting pursuit of producing the highest quality products. By 1949, the newly named Musto-Keenan Company had gained a reputation for making superior diamond tools to cut marble and tile faster and more efficiently, and has today become established as a leader in providing precision power cutting tools and diamond blades. MK Diamond is committed to making products and services that are a benchmark for the rest of the industry.

What's in the Box

One MK Diamond MK-2001SV electric masonry saw, rip guide, 14-inch diamond blade, electric water pump.

The MK-2001SV electric masonry saw has a unique open-back design, a stay level blade guard, and fork lift brackets for transporting.

From the Manufacturer

MK Diamond 161195 MK-2001SV electric 14-Inch wet/dry cutting masonry saw is the choice of professionals. The unique open back design allows for large materials to be easily cut. The cast aluminum blade guard has stainless steel water tubes that will not bend or rust. The blade shaft assembly is built with sealed, permanently lubricated, heavy-duty bearings for long maintenance free life. The recoil spring return cutting head makes plunge cutting quick and easy. Metal feet double as rugged rungs to accommodate moving saw with a fork lift. MK-2001SV saw has a 1-1/2-horsepower, 120-volt Baldor electric motor. Saw comes with 14-Inch dry/wet cutting diamond blade, electric water pump and rip guide.

• Powerful brick saw features include a unique and innovative open-back design allowing large materials to be easily cut
• Cast aluminum blade guard has stainless steel water tubes that will not bend or rust
• Stay level blade guard allows for maximum depth of cut
• Blade shaft assembly is built with sealed, permanently lubricated, heavy-duty bearings for long maintenance free life
• Fork lift brackets for ease of transportation

User questions & answers

Question:	can I cut 4" thick concrete cylinders with this saw
Answer:	There are 4 indicator lights located below the power button to show the battery left in the power bank and the charging status. When the power bank is being recharged, the indicator lights will blinking.

Product description

Continuous thin rim diamond blade for wet cutting of porcelain, vitreous and ceramic tile. Premium grade.

The MK 10-Inch 5/8-Inch Arbor Hot Dog Diamond Blade is ideal for wet cutting of porcelain, vitreous and ceramic tile. This continuous thin rim diamond blade measures 10 inches in diameter with a 5/8-inch arbor. The premium grade blade comes with a limited lifetime warranty.

From the Manufacturer

Continuous thin rim diamond blade for wet cutting of of porcelain, vitreous and ceramic tile. Premium grade.

• Premium grade
• Continuous thin rim diamond blade
• 10-inch diameter, 5/8-inch arbor
• Limited lifetime manufacturer's warranty

User questions & answers

Question:	Is it in retail packaging
Answer:	yes it came in retail packaging but I would NOT recommend this blade if you are cutting porcelain tile -- it didn't get through one tile before binding and riding up over the tile stalling the cutter and ruining the tile -- I threw it out.
Question:	How thick is it
Answer:	The 10" blade is .050" thick.
Question:	How does this blade work with glass
Answer:	How thick ? It will probably chip it. It works well with tile and stone but is maybe too coarse for thinner glass because of it's brittleness. This is a 10" blade !
Question:	this is a segmented blade
Answer:	No. It is a continuous rim blade with laser ports to help with trueness.

Product description

MK-301 Gemking lapidary blades have been redesigned with a greater diamond concentration and a higher carbon content steel core for improved tension memory. The solid diamond sintered kerf provides better cutting performance and improved coolant flow. The MK-301 provides superior cutting performance for hard materials such as agate, petrified wood or jade. This notched blade is 10 inches in diameter with a thickness of .040. The center hole is 5/8" and this blade has a 5mm rim height. These lapidary blades require a petroleum based or synthetic cutting oil as a cutting fluid/coolant. Water is not suitable to use with these blades and will result in damage to the blade's cutting capacity and will void the warranty. The blades should not be used dry under any circumstances. These MK diamond blades are manufactured by their sister company Barranca, which is a staple name in the lapidary industry, so you will know these are high quality. 5/8" arbors can be bushed to 1/2", 1" arbors can be bushed to 3/4" or 5/8". Please contact MK Diamond Products directly to obtain requested bushings at 800-421-5830.

From the Manufacturer

MK Diamond 166068 MK-301 Gemking Lapidary 10-Inch diameter by .040-Inch width by 5/8-Inch arbor is a wet cutting blade and has been redesigned with a greater diamond concentration for faster cutting. The carbon steel core provides for better tension memory and the solid diamond sintered kerf provides superior cutting performance and improved coolant flow. The MK-301 Gemking is engineered for excellent service when cutting hard materials such as agate, petrified wood and jade.

• Wet cutting for longer blade life and protection of valuable project materials
• Greater diamond concentration for faster cutting
• Carbon steel core for better tension memory
• Solid diamond kerf provides superior cutting performance and improved coolant flow

User questions & answers

Question:	is it suitable for cutting ceramics
Answer:	I purchased this one and it didn't last for more than an hour cutting glass pattern bars. You would be better off getting this other one instead... https://www.amazon.com/gp/product/B002JAQCDS/ref=oh_aui_detailpage_o08_s00?ie=UTF8&psc=1
Question:	What kind of cutting oil do I want to use with this for cutting jade
Answer:	I have not had experience with this blade cutting glass or bottles...this is the blade I use, MK Diamond 160294 MK-333JB 10-Inch Porcelain Diamond Blade. It cuts glass and bottles without splintering, although with bottles, some are "bad glass" and don't cut without splintering no matter what you do.
Question:	what size is the arbor shaft
Answer:	5/8" Arbor - fits almost all tile saws.
Question:	Can Lapcraft Tool-cool be used with this blade
Answer:	The dimension of main unit is measured at approximately 7in x 7in x 7in.
Question:	What models does this fit
Answer:	One(1) Years from the date of purchase. Additional warranty (up to 5 years) can be purchased from the manufacture's website. Warranty details are listed on the Warranty Card in the package.
Question:	Alton - You made a review on noise...what kind of noise were you unexpectedly hearing
Answer:	You can use a fitted sheet over the heated pad. Mattress Pad is not recommended because it is too thick so the heat may not get to the upper layer.
Question:	Was anyone able to confirm if this mk motor will work as a replacement for a husky thd950l
Answer:	Sorry our full size is running out of stock now.
Question:	Will this motor replace sanko 156428-S in older mk
Answer:	Dear customer: Thank you for your interest in the USB electric cloth heater pad. But I'm sorry that it does not have auto shut off. Thank you for understanding. Have a nice day.