12 best get hand saws

Product description

The GreatNeck Saw Set Tool is ideal for setting teeth on back and panel saws up to 18 gauge. A graduated dial ensures correct anvil setting.

• ANY MAJOR ANGLE: This box gives precise angles at 45, 90, and 135 degrees for exact cutting
• BACKED UP BY: If something happens to your adjustable miter box during normal, everyday use, it should be covered by the GreatNeck 1 Year warranty. See product manual for warranty conditions
• A MUST FOR WOOD PROJECTS: This quality miter box is essential for any woodworking project. It saves you time and stress. You have everything you need for measuring and cutting angles with this one tool
• EASY MEASUREMENTS: This hand miter box has a ruler scale for quick and easy measuring
• DURABLE BUILD: This carpenter box is crafted from high-quality plastic for maximum rigidity

User questions & answers

Question:	will it work on a curved tapered crosscut hand saw
Answer:	It is good and light for SMALL things I use it in the garden I do not think this would be right for you
Question:	Can this work with a 4" hole saw
Answer:	Interestingly enough, neither the informative cardboard that covers the tool, nor the tool itself, has any markings as to where this saw is manufactured.
Question:	What is the smallest saw teeth it will set and the largest saw teeth it will set
Answer:	No.! This is basically a framing saw. If you want a hand saw that will produce a “smooth” cut edge, buy a “pull cut” Japanese saw. They are light and flexible.
Question:	I almost hate to ask but.. where is this set made
Answer:	Cutting a 16" stump with a 19" saw means you will only be getting 3" strokes by the time you make it to the center. I suggest renting a chain saw at your local hardware store. If you want to own a hand saw capable of doing that, go for the Lynx 3' (for one person) or 6' (for 2 person use). You may be able to find a 1 or 2 man crosscut for less at a flea market. It'll just take a wire brush and some grease like WD40 or mineral oil to clean up the rust and then a quick sharpening with a bastard file.

• √PERFECT GIFT - 62 Sharpest Carbon Steel Teeth. The High Limb Saw has an Upgraded 48 Inch Chain with Blades on BOTH sides so it doesn't matter how it lands.
• √LOTS OF FREEBIES - IF you buy our chainsaw,you will get two 6 foot long emergency safety ropes,2 sturdy woven nylon handles,three spring buckles(one big and two small) and throwing weight pouch.
• √PORTABLE SURVIVAL CHAINSAW - Cuts high limbs safely and easily from the ground.Our saws will allow you to easily tear through wood while cutting on both stroke rotations.
• √A TON OF USES - Our chainsaw is perfect for camping,field survival, hunting,backpacking,gardening.
• √FREE 30-DAY 100% MONEY-BACK GUARANTEE - If you are not satisfied after using our pocket chainsaw, we will offer you a full 100% money-back guarantee!

User questions & answers

Question:	Is this product durable
Answer:	They say that they are rated for 120V 60Hz 50W... so I don't think so...
Question:	What keeps the chain from running upside down
Answer:	It comes with 2 batteries. one 1.5Ah (P107) and one 4.0Ah (P108).
Question:	What size file is used for sharpening
Answer:	Yes
Question:	where is this made
Answer:	I'm not sure... It says it is only rated for 120V.

Product description

Hunting?

Front/Back Yard You Tool to Remove Limbs?

Look No Further. This Product is It!

Our Complete Pruning, Saw and Shears with the bonus Gloves is Everything You Need:

Features:

Pruning Saw

Triple-cut Razor Teeth For Efficient Cutting Smooth, fast Sawing.

Cut Limbs, Small To Large Tree Branches Very Easily

Soft Rubber-coated Handle

 

Pruning Shears

Cutting Capacity: 5/8 inch diameter

High-quality Blades Hardened Steel

Ergonomically Designed Handle

Non-slip handle

Gardening Gloves

One Size Fits Most

Pvc Dotted More Abrasion Resistance And Grip

All-Purpose: Construction, Plumbers, Gardening

It Worked for These People, and It Will Work for You

“Small, sharp, foldable, fits in pocket and works wonders. All that I wanted”

~ Mark D.

It’s Your Time.

"Click the Add to Cart" or “Buy Now”!

• 【PRUNING SAW CUTS LIKE BUTTER】- Triple-cut Razor Teeth For Efficient Cutting Smooth,fast Sawing. Cut Limbs, Small To Large Tree Branches Very Easily.
• 【PRUNING SHEARS 】- GET THE JOB DONE AT YOUR YARD: Unbelievably easy to prune with Sharp, Strong, and Comfortable grip. Clean Cuts and easy to use.
• 【CAN BE USED IN VARIOUS WAYS】 - Survival, Camping, Outdoors, Bushcraft, And The Like. Cutting Twigs, Branches Stems, Shrubs, Prune Trees.
• 【EXCELLENT HANDY AND CONVENIENT TOOL】 - Very Sturdy And Easy To Use. Easy To Pack And Fold. Comfortable Hand And Lightweight. The Bright Color Makes It Easy To Find If You Dropped It.
• 【SAFE】 - Safe Locking mechanism button with safety lock for both lock-in and lock-out, so that you wouldn't cut yourself carelessly and keeps the blades clean.

User questions & answers

Question:	How do I lock pruning shears
Answer:	make in china
Question:	How do you close the saw
Answer:	The staggered teeth of the blade allow it to cut on both the push and pull strokes.
Question:	what is the case/pouch made of, is it canvas, plastic, plether
Answer:	Saws that cut on the push and the pull stroke are mostly carpenter wood saws and bone saws. With these saws you are normally cutting a fixed object and are sawing down or level. Pull saws cut on the return pull stroke and are mainly used for pruning or similar duty. Most of the time you are reaching up to cut and you use gravity to help on the downward pull stroke.

Product description

This is lightweight reciprocating saw is only 3. 13 lbs. and 37% lighter than the DCS367 Compact Reciprocating Saw (Tool Only). This saw s LED helps illuminate dark workspaces and provides up to 2, 800 spm to help get the job done. The pivoting shoe and variable speed trigger provide added control for a variety of jobs. Battery and charger sold separately.

• Compact at only 12. 5 in. Front to back
• 37% lighter than the Dcs367 reciprocating saw (tool only)
• Brushless motor for increased performance
• Led to help illuminate dark work spaces
• Tool-free blade release allows for quick and easy blade changes

User questions & answers

Question:	I assume the pivoting shoe allows you to cut downwards, or to turn the blade 90 degree to cut sideways ? Is this correct
Answer:	Yes, that would be correct
Question:	does this saw have safety feature that cuts out without enough amperage
Answer:	This saw is powered by a battery and will cut off once the battery dies.
Question:	Will this saw efficiently cut black iron pipe
Answer:	Yes with the right blade. 12-18 teeth per inch (TPI) should do it. Better method would be a portable band saw if available, but this will hack and whack black iron/carbon steel pipe.
Question:	Why in home Depot this saw is cheaper
Answer:	I saw this at home depot they wanted 149.00 plus tax

Product description

There are saws for the most applications and job. Select from 15 in. And 20 in. Hand saws, a 10 in. Fine-finish hand saw for cutting wood, plastic, and laminate, 12 in. Hacksaw, and for those precision cuts, an adjustable Miter box and clamping Miter box both complete with saws.

• Exclusive tooth geometry for a fast clean cut
• Induction Hardened teeth for a long lasting sharpness
• Ergonomically designed bi-material handle for comfort and control
• Handle offers a square/mitre feature with 45 degrees; and 90 degrees
• Full Lifetime Warranty, refer to "Warranty & Support" section below for full details

User questions & answers

Question:	what is the length of the blade
Answer:	Hey Mjcali, To receive the warranty extension, you would need to purchase the fuel or 2 stroke oil on the same order. The additional fuel or 2 stroke oil must be on the same receipt to have received the warranty. I would also recommend holding on to your receipt of your purchase in case any proof of purchase is required if any warranty service is required. You can read more about our fuel/oil warranty program here: https://www.husqvarna.com/us/support/extended-warranty-program/ I hope this helps! Thanks for considering Husqvarna for your outdoor power equipment needs!
Question:	Suitable to more easily cut old weathered pallets? Quickness in sawing old pallets - not concerned with fineness of cut -will use for firewood starts
Answer:	The two saws you mention are very similar in terms of features, weight, etc. The biggest difference is that the 445e II has a slimmer and more ergonomic design at 20 x 10 x 12.5 in as opposed to the 1845, at 39 x 11 x 12.5 in. Thanks for considering Husqvarna for your outdoor power equipment needs!
Question:	How many teeth per inch
Answer:	Ethanol is NOT recommended for any 2 cycle engine. Some states have gas stations with pumps that have no ethanol and they usually call it "sport fuel." For example, it is often found at marinas but it can also be found at some gas stations in states that allow the sale of non-ethanol gasoline for 2 cycle engines. There is actually a Android App produced by a foundation promoting non ethanol fuel. You can search for it on Google play. It will search by location to give you the closest station. Please remember that this chainsaw (Ruinopar) uses a totally different fuel to 2 cycle oil mixture. 20:1 for the break-in period and then 25:1 thereafter. Most premixed fuel sold at places like Lowes or Home Depot is 40:1 or 50:1. If you use this premix from these stores, make sure you modify the fuel to oil mixture with the addition of the necessary oil.
Question:	where are these made
Answer:	Yes, every machine comes with two chains.

Product description

18 3/4" overall. 13 1/2"curved hard chrome-plated stainless mono-constructed saw blade with impulse-hardened non-set tooth design. 6.5 teeth per inch configuration. Black molded rubber handle with lanyard hole. Black polypropylene sheath with detachable belt holder.

From the Manufacturer

Best-selling, PROFESSIONAL, heavy-duty hand saw with 13 inch curved mono-constructed blade. Features rust-resistant, hard chrome-plated, taper-ground curved blade with an impulse-hardened non-set tooth design. Curved blade provides greater cutting speed with less effort. Utilizes proprietary Silky MIRAI-ME (Smooth Cutting) Technology - The Teeth of the Future! The precision-ground, razor-sharp teeth with four cutting angles provide fast, clean and extremely smooth cutting action. The hard chrome-plated blade has 6.4 teeth per inch, resists rust and effects of tree resin, and wipes clean easily. Blade thickness is 1.5mm. Molded-rubber handle holds the high-performance fast-cutting curved blade that fits securely inside its custom-fitted, pivoting, black polypropylene sheath with detachable belt holder. Great combination of high performance curved blade with a comfortable sure-grip handle that really sticks in your hands. Exceptional design, strength, balance and superior finish quality. Suitable for all pruning tasks and cutting large branches. Made in Japan. ZUBAT is available in four blade lengths: 9-1/2-inch (240 mm), 10-2/3-inch (270 mm), 11-4/5-inch (300 mm), and 13-inch (330 mm).

• Silky’s most popular curved pruning saw
• 0.65 pounds (300 grams) operating weight; 1.1 pounds (480 grams) weight with sheath (included)
• Product applications include pruning & trimming, lawn & garden

User questions & answers

Question:	Can the scabbard be used on the left side or only on the right
Answer:	If by “durable” you mean well made,yes Very well made
Question:	Does anyone ever sharpen the saw and if so, how would that be done
Answer:	The chain is sharp on both the top and bottom. Works very well.
Question:	An issue is made about the blade thickness of 1.4. Newer specs form Silky are 1.5. Any thoughts here
Answer:	You can use a 4mm diameter file.
Question:	Where can one find/obtain instructions in English on how to safely clean and maintain the blade
Answer:	China

Product features

Silky Professional Series Zubat Hand Saws

The Zubat Professional series is the saw of choice amongst the arborist market & at-home users. If you're looking for maximum performance & efficiency this saw is for you. The Zubat series delivers a professional, heavy-duty, mono-constructed blade which provides greater cutting with less effort.

Available in 4 different blade lengths: 240mm, 270mm, 300mm, 330mm.

For any pruning work or to tackle large branches, the Zubat Professional is an exceptional choice.

Full Tang Blades

-Replacement blades are available for all Silky Zubat saws.

-Full tang blades provide greater stability while cutting.

*Secure interface between handle & blade eliminates risk of breakage.

Includes Professional Scabbard

-Dual-roller entry system guides saw blade to protect entryway into scabbard.

-Uniquely designed with loops for leg straps.

High Grade Japanese Steel

* Professional Series taper ground blades are 1.5mm thick-

* Provides optimal combination of blade strength & flexibility-

Highest Quality Materials

* Metal screws & washers for secure connection of handle-

* Non-slip comfort grip handle absorbs vibration & reduces fatigue-

Product description

Black & Decker's PHS550B powered handsaw has a powerful 3.4 amp, 4,600 SPM motor, which allows it to easily cut wood and metal. It features a patented tool-free blade change feature, a 6-foot cord, a compact and lightweight design, and comes with a storage bag, large capacity blade, metal cutting blade, and a 2-year limited warranty. Amazon.com The Black & Decker PHS550B Powered Handsaw with Storage Bag comes with a powerful 3.4 Amp, 4,600 SPM motor for controlled cuts in wood, plastic, and metal. Its compact and lightweight design makes the saw easy to control and handle, and its 6-foot cord allows for easy use in and around the home for indoor use and outdoor pruning. Other features include a patented tool-free blade changes, a large capacity blade, and a metal cutting blade ideal for a variety of projects. The included storage bag easily stores the saw, blades, and the cord. Backed by a 2-year limited warranty, the PHS550B Powered Handsaw comes with a large capacity blade, a metal cutting blade, and a storage bag.

The Black & Decker PHS550B Powered Handsaw with Storage Bag comes with a powerful 3.4 Amp, 4,600 SPM motor for controlled cuts in wood, plastic, and metal. Its compact and lightweight design makes the saw easy to control and handle, and its 6-foot cord allows for easy use in and around the home for indoor use and outdoor pruning. Other features include a patented tool-free blade changes, a large capacity blade, and a metal cutting blade ideal for a variety of projects. The included storage bag easily stores the saw, blades, and the cord. Backed by a 2-year limited warranty, the PHS550B Powered Handsaw comes with a large capacity blade, a metal cutting blade, and a storage bag.

• Powerful 3.4 amp, 4,600 SPM motor
• Powerful 3.4 amp, 4,600 SPM motor
• Cuts wood and metal; patented tool-free blade changes
• 6-foot cord; compact and lightweight design
• 2-year limited warranty
• Included with handsaw: large capacity blade, metal cutting blade, and storage bag

User questions & answers

Question:	I can't get the blade in. The instructions talk about rotating a pin using a screwdriver. I can see the pin but can't get it to budge. Any advice
Answer:	My husband had no trouble with the blade twice. But when he took blade off to put it away the third time, he couldn't get it back on. For some reason, the pin inside that the hole in the blade fits onto had turned. You need to press in the black button to raise the pin. Then, while it is raised, use a flat head screwdriver to rotate that pin back to where it should be. When you look in the hole on the side of the drill, the pin should face the same direction. Once the pin is rotated into the right direction, the blade should go on. I watched a Youtube video and could tell our pin had rotated based on that.
Question:	Appropriate for cutting lumber like a 2x4 or sheet of paneling
Answer:	Yes, this saw will do 2x4s or 2x6s, for example, but I'd keep in mind that the saw probably is not for 3x3 or larger wooden posts. I'm just guessing on the largest size, however, from the size of the blade and overall size of the unit. This saw easily cuts paneling, however. Two blades come with the saw: a coarse blade for wood, and a fine-tooth blade for metal and plastic or PVC piping. So far the saw has done a great job for various tasks, and it's very compact and comfortable to use. I've used it mainly for planks about an inch thick, and fallen tree branches that need to be trimmed.
Question:	can i cut bone
Answer:	it probably would cut bone but it has to be stable it probably would fly all over.
Question:	Is this a good saw to use for cutting tree branches (between 3" and 5" thick) into firewood? Has anyone tried to do this with this saw
Answer:	It ought to. I just used mine to cut two 2" x 6" pine nailed together. That would be 3" x 5 1/2".

Product features

Black+Decker PHS550B 3.4 Amp Powered Handsaw with Storage Bag

Cut through wood, wood composites, plastic, and non-ferrous metal with this electric power hand saw. Compact and lightweight, it’s easy to use and versatile enough for both indoor and outdoor applications.

• High-performance 3.4A power hand saw motor with 4600 SPM for controlled cuts in wood, plastic + metal
• Compact, lightweight design makes it easy to control + handle
• Ideal for straight cutting, for great results on large materials
• Quick + easy tool-free blade changes
• Versatile indoor/outdoor operation
• Storage bag easily stores saw, blades, cord + more for your house and garden

Product description

The 4-1/2” AC Compact Circular Saw from Worx was made to cut 2” nominal lumber. There’s no need to lug out the full-size circ saw for jobs like that. Just grab your AC and get to work. It also makes a great saw for DIY-ers or those living in apartments. It’s slim enough to keep in a closet or a drawer. But with a no-load speed of 3500/rpm, it has enough power to do most of the things larger saws can do, with way less hassle. It comes with a carbide-tipped wood cutting blade so you can get going right out of the box. And that blade can be replaced with any 4-1/2” blade with a 3/8” arbor from the hardware store. Plus, you can switch out the blade for metal, plastic, or tile cutting blades, too. It has a max cutting depth of 1-11/16”, and the included parallel guide lets you confidently make long straight cuts. The dust port allows you to hook up your shop vac so it can pull sawdust and debris right out of the air as you work. And the integrated safety trigger prevents accidental cutting. Perfect for quick plunge cuts or any other small jobs you want to do around the house, or big jobs down in the shop if you just want to take advantage of its maneuverability. The Worx 4-1/2” AC Compact Circular Saw is roughly half the size of standard circ saws but has full-size capabilities.

• SMALL FOR A REASON: Quick, more efficient cuts and you can take it with you when you don’t want to lug a big saw around
• EZ-SET DEPTH GAUGE The lever lets you go from 0-45 degree bevel settings with quick adjustment
• MADE FOR LUMBER: Excellent depth-of-cut for slicing up to 2" stock lumber. Cut 2x4s in a single pass. It also cuts metal, tile, and plastic
• SEE THE CUT: Left-sided blade optimization gives you a clear line of sight on anything you’re cutting
• DO IT YOURSELF. DO IT BETTER. DO IT WITH WORX. WORX tools are engineered with cutting-edge technology, and above modern efficiency standards, so you can build a cost-effective tool collection that’s been designed to last
• POWERFUL, PORTABLE: At 4-1/2”, and only half the weight of a full 7-1/4” circular saw, you get portability without sacrificing power. The thinner blade makes for less strain on the tool, so it can work harder
• 4.4 LBS Light, so you can operate it with one hand. That weight also allows you to make more precise cuts and work longer with less fatigue

User questions & answers

Question:	My saw can not cut as good as i thought is there something i can do about it
Answer:	These smaller blade saws do not cut as fast as the larger saws. Tip #1- higher quality blades, tip#2- listen to the motor as you cut. You can hear it start to torque as you press too hard on the saw.
Question:	what are the amps
Answer:	The WorxSaw is 120V~60HZ with a rated amps of 4.0.
Question:	Good fit for small woman's hand
Answer:	For a power saw you won't find better in this category. Very controllable and comfortable for a smaller hand. I can't say enough good about this saw. I'm just completing a 8x16 customized garden shed and used this saw for the whole project. Treated lumber to plywood. I wanted to give it a real workout to see its longevity because I want to buy a few more for Christmas gifts. PS - you can get the good blades on Amazon for all types of cutting.
Question:	What kinds of blade included
Answer:	It comes with a 4 1/2 " 24 tooth general cutting blade. I was able to purchase a similar Freud blade and a Dewalt plywood cutting blade on Amazon for VERY reasonable prices also. I believe the big box stores carry a masonry blade that would fit this saw should you need one but if not I'm confident you could find one on-line. So far I am EXTREMELY pleased with this saw although longevity is naturally still in question. It did cut through a few experimental treated 2x4s with ease and is very comfortable in the hand. I'm giving it an A thus far. Great price as compared to similar mini-circular saws .

Product features

Integrated Safety Trigger

We design tools with safety in mind, that’s why there’s a safety trigger you have to hold in place while you squeeze the on/off trigger. That way no one can accidentally start-up this saw.

Easy-Set Depth Gauge

While the WORXSAW was made to cut 2x4s, you can set the depth to more shallow cuts and use it for all sorts of projects.

Lightweight: Less Than 5 lbs

The WORXSAW is easy to control and maneuver with just one hand. Rip, bevel, plunge, and pocket cuts are all simple to perform as a result.

Left-Sided Blade Design

The body of the tool stays out of the way so you get exceptional cut-line visibility.

Half the Size, Plenty of Power

The 4-½” blade has half the kerf of the traditional 7-¼” circ saw blades, so the motor can spin it twice as fast--up to 3500 revs/min. The thinner blade also causes less strain, increasing the life of the tool.

Perfectly Portable

Full size circ saws can be a pain. The WORXSAW stores easier, travels lighter, and is much handier on the job site or in the workshop. For quick plunge cuts, without all the setup, just grab it and go.

Product description

M18 6 1/2 CIRCULAR SAW TOOL ONLY. The product is easy to use. The product is durable. Product is shipped in bulk packaging.

From the Manufacturer

When you’re performing woodcutting applications, nothing less than the best, no-nonsense saws will suffice. That’s why Milwaukee has released the 2630-20, a heavy-duty 18 volt lithium ion powerhouse that does away with the frills of consumer-grade cordless circular saws to deliver you the highest grade of power and toughness possible. It has a powerful motor, driving the included blade at up to 3,500 revolutions per minute. This motor is contained in a solid structure with magnesium guards on the top and bottom of the blade well. This will be able to survive drops and other damages commonly found on the jobsite. On top of that, a robust depth and bevel adjustment system is located onboard near the foot. You can turn it as much as 45 degrees and still affect its depth up to an inch and a half. A powerful carbide-tipped cutting blade is even included in this kit, so you’ll be able to get to work as soon as possible, assuming you have compatible M18 lithium ion batteries at your disposal. With such a powerful system, its no wonder it comes from Milwaukee.

• ELECTRONIC BRAKES will stop your blade quickly when you’re finished with your cut. You won’t need to waste time waiting around for the blade to slow down, so you can get back to work quickly
• SOFT GRIP HANDLE provides maximum comfort so you can work with precision in slippery environments
• BEVEL AND DEPTH ADJUSTMENT: You can adjust the depth up to 1 1/2" and the bevel up to 45 degrees, giving you a huge degree of versatility in your cuts
• MAGNESIUM GUARDS on the top and bottom of the blade well keep the unit protected from impacts like bumps and drops of several feet. This will allow you to work confident in the safety of your tool and yourself
• M18 COMPATIBLE: This cordless circular saw is compatible with Milwaukee M18 18 Volt Lithium Ion batteries. Compatible models include the 48-11-1860, 48-11-1850, 48-11-1828, 48-11-1815, 48-11-1840, and 48-11-1820
• Heavy-Duty Magnesium Guards for maximum durability and On-board fuel gauge displays remaining battery charge
• Ergonomic, compact and lightweight design with soft-grip handle for operator comfort

User questions & answers

Question:	does it come with a case
Answer:	All lotions are pretty much the same there was no improvement by the end of finishing it. Not that I was aware of any ways
Question:	does this include the blade
Answer:	Nothing about spf is on MY jar so I assume "No" but I love the product!
Question:	What is the maximum length you could rip into say 4x6 construction wood at maximum depth with a full charge
Answer:	Hi! Our products are manufactured in the USA, Australia, South Korea and Japan.
Question:	will battery 48-11-1840 m18 redlithium xc 4.0 work
Answer:	I like is good energizing lotion I wish I can find anywhere else

Product description

RUGGED, DURABLE, CARBON-STEEL STRENGTH – SOLID QUALITY AND SHARPNESS YOU CAN FEEL

While many hand saws are made of flimsy, low-quality blades that bend and break, Home Planet Gear’s EverSaw Folding Hand Saw 8.0 is crafted out of rugged SK5 carbon steel for rock-solid strength and durability. Our survival saw features a medium-tooth, adjustable 8” blade made to cut easily through wood, bone, and plastic up to 4” in diameter, so you can count on its long-lasting power. With an ergonomic, no-slip handle and triple-cut razor teeth, our foldable saw combines comfort and security with superior sharpness.

Don’t settle for saws with faulty pop-button locks that let the saw close or snap without warning – a huge safety hazard. We’ve designed the EverSaw 8.0 with a special gear-style lock, for better security you can depend on. And because our pocket saw blade fits in its handle completely, no teeth are left exposed – so you feel extra safe while carrying it.

The EverSaw Folding Hand Saw 8.0 features:

-8” SK5 Carbon Steel Blade

-Triple-Cut Medium Razor Teeth

-Extra-Secure Gear Style Lock

-Adjustable Blade

-Ergonomic, No-Slip Thermoplastic Rubber Handle

-Extended Length: 17"

-Closed Length: 9½"

-Convenient Size and Weight for Carrying

At Home Planet Gear, we put in the time, research, and care to craft premium quality, high-performance tools for the outdoorsman and outdoorswoman. A family-owned company right here in the U.S., our customers have been our top priority from day one. If for any reason you aren’t satisfied with your small saw – during the entire lifetime of your purchase – don’t hesitate to reach out to us so we can make it right.

• ★ MANY HAND SAWS ARE MADE OF FLIMSY AND CHEAP MATERIALS that bend and even break after a few uses. At Home Planet Gear, we made it our goal to create a SOLID, HIGH-PERFORMING saw made of PREMIUM MATERIALS that don't bend or break. After weeks of testing, we perfected EverSaw Folding Hand Saw, a rugged pull cut hand saw with a MEDIUM-TOOTH, ADJUSTABLE 8” SK5 CARBON STEEL BLADE. Made to easily cut wood, bone, and plastic up to 4” in diameter, cutting will never be a struggle again.
• ★ UNLIKE FOLDING SAWS WITH FAULTY POP-BUTTON LOCKING MECHANISMS that allow the saw to close or snap unexpectedly – a major SAFETY HAZARD – our small hand saw wood is specially designed with a stronger, DEPENDABLE GEAR LOCK to secure the open blade firmly in place. Our folding camp saw ’s blade fits fully into the handle, so NO TEETH ARE EXPOSED when closed – You feel extra safe while carrying it.
• ★ WHILE OTHER hand saws for cutting wood TEND TO BE MUCH DULLER THAN EXPECTED, our saw blade features super sharp, TRIPLE-CUT RAZOR TEETH made for Japanese-style pull cut sawing. Hardened to stay sharp and reduce friction, for SMOOTH, FAST SAWING. And with our butcher saw ’s ergonomic, thermoplastic RIBBED RUBBER HANDLE, you’ll never have to worry about it slipping.
• ★ TRULY MULTIPURPOSE – Our wood cutter has a WIDE VARIETY OF USES ranging from a backpacking saw, camping saw folding and hunting gear saw to a branch cutter, tree saw, limb saw, snow saw, winter pruning saw and pruning saws for tree trimming. They’re the perfect camping gear dad gifts for men and women, for their portable tool box. With an extended full length of 17” and 9½” inches when closed, our bone saw is a CONVENIENT SIZE AND WEIGHT for easy carry.
• ★ AT HOME PLANET GEAR, WE PUT IN THE TIME, RESEARCH, AND CARE to craft PREMIUM QUALITY, HIGH-PERFORMANCE TOOLS for the outdoorsman and outdoorswoman. A FAMILY-OWNED company right here in the U.S., our customers have been our top priority from day one. If for any reason you aren’t satisfied with our hand saws for trees – during the entire LIFETIME of your purchase – don’t hesitate to REACH OUT TO US so we can make it right.

User questions & answers

Question:	I have purchased many blade saws that rust away in less than a year. I live close to the ocean. Is this a steel blade
Answer:	Tint, tone, shade, and hue are all synonyms for each other. If you are wanting more info on the color red of these pants then they are a darker red.
Question:	Does it come with sheath
Answer:	It's 3 1/2 inches long with just over 3 1/4 inches of actual sharpened edge.
Question:	Can this be used to cut firewood
Answer:	I didn't buy the clip version and it doesn't have a clip like on many pocket knifes. I does have the lanyard clip as shown in the picture
Question:	I just used my saw for the first time but now I can't figure out how to close it. Can someone please help me? Thank you
Answer:	This knife does have a robust and effective pocket clip.

• ★POWERFUL TOOL&2 SAW BLADES: Blade size 4.5 inches, no load speed 3,400 RPM for faster multi-purpose cuts of wood, soft metal, tile, drywwall, plastic and more with ease. It comes with 2 blades, 24 Teeth Wood Saw Blade and 60 Teeth Metal Saw Blade which can be easily changed with the Allen wrench
• ★ADJUSTABLE BEVEL&DEPTH: Adjustable cutting angle-The maximum depth of cut at 90°is 1-11/16”and bevel capacity at 45 °is 1-1/8”. Perfect for miter cuts, bevels, framing and edging. Angle guide and quick adjustment gives you a huge degree of versatility in your cuts
• ★LASER GUIDE: To ensure a parallel cut, laser guide is available in our compact circular saw. With the laser indicator as the guide during the cutting process, your line will be illuminated by the beam, it ensures a professional and precise cutting line, convenient for cutting
• ★ERGONOMIC DESIGN & SAFETY: Features double protection switch, prevents the machine from accidentally opening, promises a safer cutting job; Soft rubber handle designed to comfortably fit in hand for improved control with minimal vibration; Vacuum adaptor allows to hook up with a vacuum, sucking away all sawdust coming from the cutting
• ★WHAT YOU GET: 1*EREBUS 97630 Cordless Circular Saw, 1* 1.3Ah Li-ion Battery, 1* 24T TCT Saw Blade, 1* 60T HSS Saw Blade, 1* Fast Charger, 1* Rip Guide, 1* Vacuum Adaptor, 1* Hex Key, 1* Manual, 1* Warranty Card; 24 Months Warranty

Product features

EREBUS 20V Circular Saws 3400RPM 4-1/2" Professional Cordless Circle Saw (97630)

Application-The Compact Circular Saw is most commonly used to refer to a hand-held electric circular saw which is designed for cutting wood, PVC pipe and so on, but may be used for cutting other materials with different blades

Soft Grip Handle&Convenience-Ergonomic rubber handle improves comfort and enhances grip and control guide with just one hand at ease; With blade guard to protect the blade under no operation; Allen wrench for blade change easily; Dust extraction adapter keeps the cut line free of dust for improved visibility

Moved Lower Guard-The fixed guard and lower guard not only protect the blades for good maintenance to extend its service life but prevent you from being hurt by the sharp blade to assure you of a safe operation

Accurate Cutting-With both laser guide and rip guide for precision cutting. Great mini circular saw that wonderful for not-big jobs, working in tight spaces, or cutting outdoor that corded saw hard not reach

EREBUS 20V Circular Saw

Voltage: 20V

No load speed: 3400RPM

Blade Size: 4-1/2”

Max cutting depth:

1-11/16”(90°);1-1/8”(45°)

Laser Guide

To ensure a parallel cut, laser guide is available in our compact circular saw. With the laser indicator as the guide during the cutting process, your line will be illuminated by the beam. It ensures a professional and precise cutting line, which is convenient for cutting.

Lock-off Swith

This equipment can prevent the machine from accidentally opening effectively. And it is an ergonomic design, which can ensure the safety while the machine working.

Adjustable Cutting Angle

The maximum depth of cut at 90°is 1-11/16”and bevel capacity at 45 °is 1-1/8”. Perfect for miter cuts, bevels, framing and edging. Angle guide and quick adjustment gives you a huge degree of versatility in your cuts.

• JAPANESE STYLE PULL SAW: This product is a “Pull Saw.” What most people are used to are European saws, which cut materials via pushing, thus are called “push saws.” On the other hand, Japanese saws cut materials via pulling and thus are called “pull saws,” which is what this product is. In comparison to “push saws,” “pull saws” are lighter in weight, requires less power, and the resulting edge is cleaner.
• JAPANESE STEEL: All SUIZAN Japanese saws are consisted of top quality japanese steel. It uses high quality Japanese steel, which makes cuts to be sharp.
• MADE IN JAPAN: All SUIZAN products are manufactured in Japan by Japanese master craftsmen.With a history of over 100 years in making japanese hand tools, all of the process gone into making tools were completed in one of Japan’s towns known for their craft making tradition: Sanjō in Niigata
• DIVERSIFY YOUR WOODWORKING LIFE: No matter you are a master or a beginner in using saws, it gives you brand new experience from using traditional Japanese style saws and enables you to make a wider variety of woodworking products, thus change your life!

User questions & answers

Question:	What is the blade material
Answer:	The scabbard is curved and designed to be worn on the right with the saw handle pointing backward. It could be worn on the left but the handle of the saw would point forward. In short, the curved saw can only be inserted into the curved scabbard one way.
Question:	whats the blade length
Answer:	I have never sharpened my saw. I don't know how to do it or who would do it. The good news is that even after a season of use it is still pretty sharp. My plan is to buy a new blade if/when this one becomes unusable.
Question:	What's the specification of tpi for each side of the blade and what is the blade thickness? i could not find at the product details... thanks
Answer:	The Zubat saw with the blade thickness of 1.4mm is for Japanese users, whereas Silky uses 1.5mm stronger material for US users.
Question:	I can’t find the replacement blade for this folding version do you guys made any replacements for it
Answer:	I don't know of any instructions. But a very light oil, what used to be called sewing machine oil would do just fine.When they used to sharpen these blades they put a vasoline type substance on the blade for protection after sharpening.

Product features

Do you know about a “Japanese Pull Saw“?

Japanese saws cut materials via pulling and thus are called “pull saws.” It requires less power, realizes exceedingly smooth and accurate cut, and results that the cutting-section is clean. And particularly this saw's blade is sharper and thinner, and has a greater number of teeth per inch than comparable saws of its size.

MADE IN JAPAN BY JAPANESE CRAFTSMEN

All SUIZAN products are manufactured in Japan by Japanese master craftsmen. While many other makers in Japan have shifted to creating products outside of Japan, we continues to plan, create trial products, and carry out product tests in our factory and are able to incorporate the fresh and new opinions of craftsmen. This allows us to ensure our high quality in our products.

Easy to interchange

The blades are easily removable and interchangeable. Links of blades are in all product links so you can easy to find them.

Over Fifty Thousand woodworkers Have Switched to SUIZAN

Over fifty thousand woodworkers, from executive woodworkers like professional carpenter, furniture maker, musical instrument makers to home carpentry and everyone in between, have switched to SUIZAN for our superior quality, unconditional support, and loyal community, and SUIZAN users are treated like family.

What is SUIZAN?

SUIZAN, a Japanese brand, creates the highest quality Japanese hand tools. With a history of over 100 years, all of the processes are completed in one of Japan’s town known for their craftsmanship: Sanjō in Niigata prefecture. That’s why our products are highly appreciated by many woodworkers.

A Brand Ambassador of SUIZAN

Jonathan Katz-Moses is an entrepreneur, inventor, and content creator with a lust for teaching only surpassed by his love for coming up with unique solutions to everyday problems. His love for making things has been a life long addiction and in 2014 he decided he needed to chase that dream. Jonathan shares his love for woodworking on his self titled YouTube Channel and has invented several woodworking tools that can be found in 157 countries around the world. He is the inventor of The Katz-Moses Magnetic Dovetail Jig and The Katz-Moses No Deflection Stop Block. Jonathan produces a segment on his YouTube Channel called "Joint of the Week" where he showcases different joinery techniques using SUIZAN Saws.