13 best cmt lathes

Product description

Highly-resistant steel-made chuck with "ER32" precision collet featuring ISO30 shank and right-hand rotation. For use with a Ø12-8mm retaining stud. To be used with Biesse machines.

From the Manufacturer

CMT now offers a new universal assembly support system for HSK-F63 and ISO 30 chucks. The innovation lies in the special bidirectional roller bearings which clamp the tool holder to the flange. This unique system offers maximum protection to the tool taper and clamps are no longer needed! The special bidirectional roller bearing, clamps the toolholder to the flange, offering maximum protection to the tool taper.

• Heavy-duty steel body for a longer tool life.
• ISO30 shank, for use with Ø12-8mm retaining stud.
• To be used with "ER32" precision collet.
• For Biesse Machines.
• Right-hand rotation.

User questions & answers

Product description

Steel-made boring bit adaptor. High-precision and total reliability, perfectly-centered, quick drill replacement and adaptable to a variety of different spindle nose designs.

• Made of super-strength steel, high precision, total reliability.
• Perfectly centered, defect-free rotation, precision relief on all surfaces.
• To be used on Nottmeyer machines (older models).
• Quick drill replacement.
• Adaptable to a variety of different spindle nose designs.

Product description

XTreme boring bits to set a new standard for performance and value! This bit features new downcut round sharpening for a more precise cut and extra-fine micrograin carbide for endurance and a faster feed speed. We use the finest industrial quality micrograin carbide to produce very sharp cutting edges and improve cutting resistance. Tool has 2 spurs and 2 cutting edges.

From the Manufacturer

2 Flute Dowel Drill bits. 10mm cutting diameter x 27mm cutting length, OAL 57.5mm, Left hand rotation

• 22mm (7/8-Inch) cutting length, 57mm (2-1/4-Inch) overall length.
• Premium quality super-strength steel body and spiral portion with center point.
• 2 cutting edges, 2 spiral flutes, 2 negatively ground spurs.
• Used on boring machines alone or with chucks.
• For drilling blind holes in solid wood, wood composites, plastic and laminated materials.

Product description

Steel-made boring bit adaptor. High-precision and total reliability, perfectly-centered, quick drill replacement and adaptable to a variety of different spindle nose designs.

• Made of super-strength steel, high precision, total reliability.
• Perfectly centered, defect-free rotation, precision relief on all surfaces.
• To be used on Ayen, Holzma, Knoevenagel, Mayer, Torwegge machines.
• Quick drill replacement.
• Adaptable to a variety of different spindle nose designs.

Product description

Steel-made boring bit adaptor. High-precision and total reliability, perfectly-centered, quick drill replacement and adaptable to a variety of different spindle nose designs.

• Made of super-strength steel, high precision, total reliability.
• Perfectly centered, defect-free rotation, precision relief on all surfaces.
• Use on Biesse, Masterwood, Morbidelli, Torwegge, Vitap and Weeke machines.
• Quick drill replacement.
• Adaptable to a variety of different spindle nose designs.

Product description

Made of super-strength steel, spiral portion coated with orange PTFE, T.C.T. head with precision balanced center point. 2+2 precision ground cutting edges, 2 negatively ground spurs, 2 spiral flutes, parallel shank with driving flat and length adjusting screw. Used for drilling and countersinking in solid wood, wood composites, plastic and laminated materials. Suitable for high performance speed on boring machines equipped with adaptors or chucks.

From the Manufacturer

Used on boring machines equipped with adaptors or chucks. Used to drill blind holes. In solid wood, wood composites, plastic and laminated materials.

• 12mm (15/32-Inch) Cutting Length, 57.5mm (2-1/4-Inch) overall length.
• Super-strength steel, HW head with precision balanced centre point.
• 2+2 precision ground cutting edges, 2 spiral flutes, parallel shank with driving flat and length adjusting screw.
• For drilling and countersinking in solid wood, wood composites, plastic and laminated materials.
• Suitable for high performance speed on boring machines equipped with adaptors or chucks.

Product description

XTreme dowell drill to set a new standard for performance and value! This bit features new downcut round sharpening for a more precise cut and extra-fine micrograin carbide for endurance and a faster feed speed. We use the finest industrial quality micrograin carbide to produce very sharp cutting edges and improve cutting resistance. Tool has 2 precision ground cutting edges and 2 negavitely ground spurs. PTFE-Coating provides a non-stick surface that prevents residue accumulation on the bit, special metal shock resistant brazing guarantees a solid bond of every tip on every bit and the steel shank grinding allows for a perfectly-fitting insertion of your tool into your machine.

• 50mm (1-31/32-Inch) Cutting length, 85mm (1-11/32-Inch) Overall Length.
• Premium quality super-strength steel body and spiral portion with center point.
• 2 precision ground cutting edges, 4 spiral flutes, 2 negatively ground spurs.
• Drill blind holes in solid wood, wood composites, plastic and laminated materials.
• Use on boring machines equipped with adaptors or chucks.

Product description

Made of super-strength steel, spiral portion coated with orange PTFE, T.C.T. head with precision balanced center point. 2+2 precision ground cutting edges, 2 negatively ground spurs, 2 spiral flutes, parallel shank with driving flat and length adjusting screw. Used for drilling and countersinking in solid wood, wood composites, plastic and laminated materials. Suitable for high performance speed on boring machines equipped with adaptors or chucks.

• 20mm (25/32-Inch) cutting length, 70mm (2-3/4-Inch) overall length.
• Super-strength steel, HW head with precision balanced centre point.
• 2+2 precision ground cutting edges, 2 spiral flutes, parallel shank with driving flat and length adjusting screw.
• For drilling and countersinking in solid wood, wood composites, plastic and laminated materials.
• Suitable for high performance speed on boring machines equipped with adaptors or chucks.

Product description

Industrial PTFE-coated saw blades represent a great choice for the shop that keep their blades running all day, every day. This blade features a laser-cut heavy-gauge plate made of German Steel (46-48 Rockwell in hardness) to guarantee great cutting performance, also in saws with lots of power. The teeth are made of micrograin carbide brazed to the blade body through a special tri-metal metallic bond (copper-silver-copper) to last longer and deliver smooth cuts. The negative hook angle limits splintering and "climbing". In addition this tool features expansion slots to reduce noise, along with anti-vibration design. Blade’s Non-Stick PTFE Coating keeps the blade running cool, reduces pitch build-up and protects against corrosion. Manufactured following precise procedures and perfectly balanced, this quality blade is delivered in unique CMT plastic case.

From the Manufacturer

Miter and radial arm saws offer you a wide range of uses, so CMT gives you a compound blade designed to meet their specifications. - the -5 degree hook angle, thin kerf and high tooth count allow you to make splinter-resistant top and bottom cuts in plywood, hardwoods, softwoods and laminates. - the negative hook keeps the blade from climbing at aggressive feed rates. With these features, CMT blades offer super performance on radial arm and miter saws and guarantee you a safer, more efficient working environment.

• For fine finish crosscuts. The 5° negative hook limits splintering and "climbing".
• Use on radial arm saws & sliding compound miter saws for cutting soft/hardwood, plywood & laminates.
• 0.118 kerf thickness, 0.098 plate thickness, -5° hook angle, 4ATB + 1 trapezoidal tooth Grind.
• Micrograin carbide teeth to last longer and deliver smooth cuts.
• Non-Stick PTFE Coating keeps blade running cool, reduces pitch buildup, protects against corrosion.

User questions & answers

Product description

Industrial PTFE-coated saw blades represent a great choice for the shop that keep their blades running all day, every day. This thin-kerf blade features a laser-cut heavy-gauge plate made of German Steel (46-48 Rockwell in hardness) to guarantee great cutting performance, also in saws with lots of power. The teeth are made of micrograin carbide brazed to the blade body through a special tri-metal metallic bond (copper-silver-copper) to last longer and deliver smooth cuts. In addition this tool features expansion slots to reduce noise, along with anti-vibration design. Blade’s Non-Stick PTFE Coating keeps the blade running cool, reduces pitch build-up and protects against corrosion. Manufactured following precise procedures and perfectly balanced, this quality blade is delivered in unique CMT plastic case.

From the Manufacturer

The CMT General blade has taken the place of the 50 tooth combination blades for discerning woodworkers to become the best all-around blade. CMT's General provides excellent results, whether cross cutting or ripping, on the table saw. The consistent distance between each ATB tooth in conjunction with less teeth than a standard blade (40 versus 50) and the 18 degree hook angle all add up to beautiful glue line rip cuts and smooth-as-glass crosscuts in both the top and bottom cut! Gives beautiful results in hardwoods, softwoods and plywood veneer. CAUTION: Our General blades are for table saw use only. NOTE: We recommend the CMT Combination Blades, series 215 and 216, for general purpose work with Radial Saws and Miter Boxes.

• For rip and crosscuts with exceptional finish. Excellent rip and crosscut on wood. Good on plywood.
• To be used on table saws and miter saws.
• 0.102 kerf thickness, 0.071 plate thickness, 18° hook angle, 20° Alternate Top Bevel Grind.
• Micrograin carbide teeth to last longer and deliver smooth cuts.
• Non-Stick PTFE Coating keeps blade running cool, reduces pitch buildup, protects against corrosion.
• For rip and crosscuts with exceptional finish. Excellent rip and crosscut on wood. Good on plywood.
• To be used on table saws and miter saws.

Product description

Steel-made boring bit adaptor. High-precision and total reliability, perfectly-centered, quick drill replacement and adaptable to a variety of different spindle nose designs.

• Made of super-strength steel, high precision, total reliability.
• Perfectly centered, defect-free rotation, precision relief on all surfaces.
• Use on Alberti, Balestrini, Bilek, Busellato, Schleicher, Vitap (older models) machines.
• Quick drill replacement.
• Adaptable to a variety of different spindle nose designs.

Product description

This blade features a thin kerf, which makes it ideal for saws that are a bit underpowered, but at the same time this tool delivers great performance. You will be satisfied with the excellent price/quality ratio. The laser cut heavy-duty blade plate is hardened to allow for great resistance (46-48 Rockwell in hardness) and features expansion slots to reduce noise and anti-vibration design. The teeth are made of micrograin carbide to ensure long-lasting cutting performance and deliver smooth cut on wood and wood products. These are brazed to the blade body through a special trimetallic bond (copper-silver-copper), so that longer cut performance and resistance are guaranteed. Blade is delivered in a unique CMT plastic case.

From the Manufacturer

CMT's ITK Fine Cut-off Blades are the ideal choice for extra-clean cuts and very good all-around performance on table saws and miter saws. Thanks to our new thin kerf design, it removes a smaller cross-section of stock on each cut, reducing drag on your saw and material waste. Offered in 10", 12" and 14" diameters with a pattern of one flat-top and two 20º ATB teeth, this blade delivers excellent crosscuts in wood or plywood, beautiful plywood rips, and even does a nice job on the occasional rip in hard or soft wood. CMT's Industrial Thin Kerf blades are precision balanced for incredibly true cuts and include the latest in expansion slots and sound-dampening channels, features that translate directly into premium cutting performance. And when you choose an ITK blade, you also receive CMT's Anti-Kickback Design, Tri-Metal Brazing and Laser Cut Arbors, plus laser-marked safety instructions and illustrated resharpening information.

• For fast extra-clean crosscuts and occasional rip as well on wood and plywood.
• To be used on radial arm saws, miter saws, table saws for cutting soft/hard wood and plywood.
• 0.098 kerf thickness, 0.071 plate thickness, 15° Hook Angle, 1 Flat + 2/20° alternate teeth Grind.
• Micrograin carbide for long-lasting cutting performance and smooth cut on wood/wood products.
• Laser-cut plate features expansion slots to reduce noise and anti-vibration design.

User questions & answers