13 best solid deck stains

Product description

Provides complete outdoor wood protection. This solid exterior wood stain adds the most color to the surface and shows the least wood grain. Available in several beautiful deck stain colors.

• Prevents Water Damage
• Advanced Polymers Provide Fade Resistant Color
• Coating Resists Mildew and UV Damage
• Applies to Freshly Cleaned Damp or Dry Wood
• Exceeds Industry Standard ASTM D-4446 for Waterproofing Wood

User questions & answers

Question:	Can this be applied to damp wood? How would it be on raised garden beds
Answer:	I wouldn't recommend it. Even applying to untreated bare wood it started peeling and flaking after less than one year. Damp wood would certainly lead to bubbling before long.
Question:	Is this solid, or semi-transparent? Title says solid. But description and product image show semi-transparent
Answer:	Solid, worked nice but had to put two coats to really cover good.
Question:	So is this 1gallon or 16 gallons? I’ve seen a similar question but I wanna be sure
Answer:	One (1) gal. 1-gallon.
Question:	In the description, it says 16 gallon. What size is it
Answer:	I got 16 gallons! It took 3 UPS guys to deliver it to me. Cheaper than drinking water!

Product features

The Thompson's Company has earned a well-deserved reputation as identifying industry trends and emerging technologies.

In the early 1920’s, polymer chemist Edward Addis Thompson developed a formula that protected buildings from exterior water damage. His discovery became known as Thompson's WaterSeal Clear Multi-Surface Waterproofer and initially was used by architectural and construction firms for concrete applications.

Product description

Cabot 140. 0017437. 007 Semi-Solid Deck & Siding Low VOC Stain, Gallon, Cordovan Brown

• Uniquely formulated for superior durability
• Deep penetrating semi-solid finish for superior UV protection
• Scuff and fade resistant
• One coat application
• Ideal for use on decks, siding, and fencing

User questions & answers

Question:	Is it easy to apply
Answer:	Yes, just brush it on.
Question:	Can this be used for interior staining
Answer:	It is not a stain per se, but a protective coating that penetrates wood. The Amazon seller sold me a pint with a quart price so be careful. Also available at Home Depot or Lowe’s
Question:	I’ve ordered 2 gallons of this product twice each time you said that it’s not shippable because it’s damaged from the shipper what’s going on
Answer:	I've ordered three times and never had a problem. It's been two years, however. No idea what could have changed. I'm out in rural SE Kansas and need shipping so I hope it is still available. Will need more this year.
Question:	I have used Cabot bleaching oil on my cedar shingles can I use the bleaching stain over the bleaching stain
Answer:	If you are sure the bleaching stain you are covering is clean and dry before the application, yes.

• Opaque Finish Completely Hides Wood Grain & Provides Maximum Protection Against Fading & Graying Caused by Damaging UV Rays
• Acts as Both a Stain and Sealer for Your Wood - Use Over Top of Existing, Solid Color Wood Stains (that still have good adhesion)
• Available in 6 Beautiful, Solid Color Finishes That Dry to a Flat, Natural Looking Finish
• Low Odor Stain, Water-Based Cleanup - Low VOCs (<60 g/L)
• For Use on all Horizontal and Vertical Wood Surfaces Including Pressure Treated Lumber, Pine, Cedar, Fir, Redwood, Mahogany, & More

User questions & answers

Question:	How much does 1 gallon cover
Answer:	About 1/4 of an 8x12 shed. I used 4 gallons for the whole shed
Question:	Will this work with a paint gun
Answer:	Yes, this product works well with an airless sprayer
Question:	Is there any texture to this solid stain? Does it last without peeling for a couple years
Answer:	There is no texture, just a smooth paint that took the texture of what we painted it on. No idea on the peel, only just used in the last couple weeks.
Question:	How much do I need for a 24’ x 18’ deck
Answer:	This is a water based product and as such gets a better coverage area. The product should yield approximately 600 SF. However, when staining a deck, you'll not meet that coverage area if you use an airless paint sprayer. Typically the average would be 450 - 475 SF. If you roll it, you should expect to get between 500 - 525 SF.

Product features

About SaverSystems

At SaverSystems, we understand the frustration people feel when they see what they've built deteriorate from the elements. Property is one investment you can bank on, but if it's made with concrete, masonry, or wood it needs to be protected. SaverSystems employs state of the art technology to help protect and save what you build.

SaverSystems has manufactured premium quality, water repellents and protective coatings for over 30 years. We make coatings for a variety of surfaces including wood, concrete, masonry. In addition to the #1 Deck brand, SaverSystems also manufactures DEFY, ChimneyRx, MasonrySaver, & ChimneySaver branded products.

All of our products are manufactured in our production facilities located in Richmond, Indiana. Every product is produced under strict quality standards and formulated with the highest quality raw materials available. Our innovative solutions and coatings have stood the test of time, and are trusted by industry professionals and homeowners alike.

Product description

Cabot Semi-Transparent Stains are deep penetrating, linseed oil-based stains that beautify and protect exterior wood. These lightly pigmented stains enhance the natural beauty of the wood by allowing the grain, texture, and color variations within the wood to show through. Acrylic 1300 series combines penetrating properties of oil-based with easy soap-and-water clean-up of water-based finishes. Will provide long-lasting, vapor-permeable protection that beautifies and enriches exterior wood surfaces. Formulated with non-fade, earth tone pigments to weather slowly over time.

• Uniquely formulated for superior durability
• Deep penetrating semi-solid finish for superior UV protection
• Scuff and fade resistant
• One coat application
• Ideal for use on decks, siding, and fencing

User questions & answers

Question:	what is the drying time
Answer:	90% hardened within 12 hours. 100% within 2 weeks.
Question:	How much is a 5 gallon of the Cabot semi-solid decking stain
Answer:	$205 at Lowe's. We bought some stain from Lowe's and some from Amazon.
Question:	Do you know the sq ft 1 gallon will cover
Answer:	Not sure

Product description

Stain with sealant in 1 Weather-ready application - clean and stain on the same day even after rain, mist and apply on hot sunny days, rain-ready in 8 hours and apply down to 35°F Enhanced waterproofing protection Advanced sunblock UV defense Exclusive SCUFF GUARD technology Provides a mildew resistant coating Penetrating acrylic oil formula with great durability 4-year protection for decks and 6 years fences and siding. Approximate Coverage One gallon covers 350 to 500 sq. feet or 32.5 to 46.5 sq. meters depending on wood texture and porosity. Area Preparation Coatings and contaminants must be completely removed from the surface. Clean with the appropriate Olympic cleaner prior to applying product. Application Test a small area to ensure acceptable appearance and penetration. Apply two coats with a high-quality brush, roller or paint pad or by spray equipment. When spraying or rolling, always back brush for best results. Some colors or drastic color changes may require an additional coat to achieve a uniform finish. Application Temperature Can be applied down to 35°F. Drying Time Normally dries in 30 minutes when applied at 50°F to 85°F. Allow 24 to 48 hours of dry time before light foot traffic. Cleanup Clean brushes and tools with soap and water. Warning Please refer to the Product Label, Technical Data Sheet (TDS) or Safety Data Sheet (SDS) for safety and detailed application instructions.

• Clean & Stain on the same day, even after rain
• Provides a mildew resistant coating
• Penetrating acrylic oil formula with great durability
• Stain with sealant in 1
• Self-priming in two coats

User questions & answers

Question:	What color is this? It says white but I doubt that’s the color
Answer:	Well it's a base white that should to be tinted to your desired end color

Product description

Gallon, exterior, acrylic, solid color, Navajo red maximum deck, fence & siding stain, white base allows the mixing of all maximum solid colors, Urethane fortified formula, water guard plus protection, advance Sunblock UV protection, scuff guard formula, creates our best mildew resistant coating, 10 years warranty on decks & 25 years on fences & siding, 100% VOC complaint in all area of the us.

• Manufactured in United States
• The Package Height of the Product is 21.3 centimetres
• The Package Length of the Product is 18.1 centimetres
• The Package Width of the Product is 19.1 centimetres

User questions & answers

Question:	is this durable
Answer:	Depends in what kind condition is your deck and how well do you prepare it. I have been using this for years. It is hard to change color, too much work. I thimk fence will be good for a couple year, but ealking area from deck has to be painted almost every year.There are bether product out there

• GOLD STANDARD OF WOOD: Our Teak Wood (FSC Certified) Is A Dense, Tight Grain Pattern That Is Less Likely To Shear, Warp, Or Crack Compared To Acacia
• NATURAL COLOR: Since Teak Wood Has A Rich Light-brown Color, No Stain Was Used In Manufacturing, Therefore The Color Will Not Fade
• NO TOOLS REQUIRED: These Portable Floating Deck Flooring Are Similar To Composite Deck Boards Where They Are Easy To Set Up Or Move
• WATER RESISTANT & ANTI-SLIP: Sealers are Factory Applied so the Solid Wood Decking Tiles Are Water Resistant, and The Wood Grain Itself has Anti-Slip Properties
• HARD SURFACE INTERLOCKING DECK TILES: Each 12" x 12"x .75" Floor Tile Allows for Tools Free Assembly While Retaining Durable Connectivity with its Thick Grid Lock Plastic Gauge Clips that Connects to One Another; Suitable for HARD SURFACES only!

User questions & answers

Question:	Triangular floor area is below in V-Berth , can these be cut to fit deck on boat
Answer:	Yes, you can cut it to fit the boat shape.
Question:	Is there a edge system for a rounded finish
Answer:	No, there is none, you have to advise the installer to cut it if you will be using in a rounded finish.
Question:	Can these be used as a pontoon boat flooring
Answer:	Yes, you can as long as there is support below the boat flooring, but regular maintenance is recommended. I hope it helps.
Question:	can i use it for deck
Answer:	Yes, this is your perfect choice to refurbish any living space, indoor or outdoor.

Product description

Olympic maximum stain + sealant in one, solid color, is a great stain & sealer that can be used on exterior horizontal and vertical surfaces. The 100 percent acrylic resin in the solid color stain offers enhanced protection from the elements for a long-lasting, durable finish. It provides enhanced waterproofing and sunblock UV defense to strengthen, protect, and condition wood fibers, ensuring the wood's natural beauty lasts. Olympic maximum with weather-ready application is also specifically formulated to allow you to stain when you want, not when the weather dictates all while getting the same excellent results. Weather-ready application provides four great benefits: 1) you can clean and stain your wood on the same day - even after rain. 2) the stain is rain-ready after just 8 hours. 3) the stain can be applied when air and surface temperatures are as low as 35 Degrees Fahrenheit. 4) If the surface is too hot to touch, lightly mist the surface before application of the stain. Olympic - America's most trusted brand since 1938. Olympic - exterior wood stain for decks & more.

• Enhanced waterproofing protection to help make sure your wood is protected from cracking due to water
• Provides a mildew resistant coating to help prevent stains and discoloring
• Advanced sunblock uv defense helps protects your wood from dangerous uv rays that can wear d the coating
• Manufacturer: PPG

User questions & answers

Question:	Title says 3 gl, options offers 5 gl. i click on 5 gl to the order but the order form shows 3 gl. so am i getting the 3 or 5 gl
Answer:	ask amazon that one
Question:	Can this product be used in a paint sprayer
Answer:	Yes. Do not thin or dilute this product.
Question:	Where can I get the clear in 5 gallon buckets? I love my new fence and don't want to apply any stain color
Answer:	Amazon
Question:	I am looking for "olympic natural look protector plus sealant ", for my red wood deck. is this the same one
Answer:	Hi there, the closest current product to the natural look protector plus is the Olympic Maximum Transparent/Toner product not the semi-transparent.

Product features

Stain + Sealant in One

Stain + Sealant in One protects and beautifies in one step.

Weather-Ready Application

Allows greater opportunities for staining when it may rain or when the weather may be too hot or cold.

Enhanced waterproofing protection

Helps make sure your wood is protected from cracking due to water.

Advanced SunBlock UV

Helps protects your wood from dangerous UV rays that can wear down the coating.

How much stain do you need to buy?

One gallon of wood stain covers approximately 250-350 square feed, which is enough for a small to medium deck. It should also cover both sides of a 25 foot long fence or a couple pieces of furniture.

Two Gallons

Two gallons of wood stain cover approximately 600 square feed, which should be more than enough for the standard deck project or a 50 foot long fence.

Three or more Gallons

Three or more gallons of wood stain will most likely only be needed on large projects, as they should cover over 850 square feed.

Note: Solid Color Stain requires two coats. You should effectively double your gallons purchased when using a solid.

How To Stain Your Wood Deck In 3 Easy Steps

Sweep debris from deck and then use a product such as Olympic Premium Deck Cleaner to penetrate the wood and lift dirt to the surface to be cleaned, as well as clean stains caused by mildew, dirt, algae and mold. Allow surface to dry.

STEP 2

Tape off any surfaces you don’t want stained. Also, avoid staining in direct sunlight or on hot surfaces because the stain will dry too fast to penetrate properly.

STEP 3

For clear, toner and semi-transparent stains, apply a thin coat with a high-quality brush, roller, paint pad, or spray. For solid stains, apply two thin coats with a brush, roller, or paint pad. To avoid lap marks, apply to a few boards at a time, keeping a wet edge.

For best results, backbrush into the surface to work finish into the wood and ensure the coating is even. Make sure to treat all areas of the wood, including joints, edges and ends.

You’re going to want to follow the directions on your stain container to determine if anything needs done after your final application.

Olympic Wood Stains: A reputation as durable as our products

Olympic Wood Stains has provided exceptional protection and durability for all wood types, applications and budgets since 1938.

Nothing protects and beautifies your wood like Olympic Exterior Stain. Trust the natural beauty of your wood to Olympic Stains.

Olympic Paints and Stains guarantees satisfaction with the application and performance properties of this product when applied to a properly prepared surface in accordance with label directions. This guarantee is limited to your choice of product replacement or refund of the purchase price. See product label for more details.

Product description

Ready Seal stain enhances the natural beauty of the wood allowing the texture and grain of the wood to remain visible. This stain is an oil-based, semi transparent stain and sealer in one, suitable for all your exterior wood projects. It is a unique formula that penetrates deeply to protect and preserve wood from the elements such as mold, mildew and damaging UV rays.

From the Manufacturer

Ready Seal stain enhances the natural beauty of the wood allowing the texture and grain of the wood to remain visible. This stain is an oil-based, semi transparent stain and sealer in one, suitable for all your exterior wood projects. It is a unique formula that penetrates deeply to protect and preserve wood from the elements such as mold, mildew and damaging UV rays.

• Requires no primer. Ready Seal is darkest when first applied. It reaches its true color in approximately 14 days. Do not apply Ready Seal over painted or newly stained surfaces. Sealed surfaces inhibit penetration.
• May be applied using sprayer, roller or brush onto the woods surface.
• Requires no back brushing and will nerver leave runs, laps, or streaks.
• Requires no wet-line application, the product will blend itself and can be applied in any temperature range for proper application.
• Requires no diluting or thinning prior to spray applications.
• Subject to or will include a PaintCare recycling fee in the following states: CT, or VT. Not available in CA.
• "Goof Proof" application

User questions & answers

Question:	What is the warranty on this
Answer:	I don't believe there is any warranty. We applied it two years ago and the covered areas still look good. The section in direct Sun...needs to have it applied again.
Question:	How long can the product be stored once the container is opened
Answer:	We actually used some that we had stored in our garage that was left over from the last time we stained our siding and that was in the summer of 2012, 6 yrs ago. When we removed the lid, it looked like it had become a gel but my husband used a drill with a paint mixer/stirrer tool and it became liquefied again. We applied it to the siding without incident and the color matched the new 5 gallon containers we bought this summer .
Question:	I have 275 ft of fence plus a gate- what's the coverage with using a sprayer
Answer:	I’m in the process of staining my fence (I am using a different brand) with a semi-transparent stain. I have 187’ of fence at 5’ high including 2 gates. Applied with a roller and brush, I’m going to need around 13 gallons. My recommendation is rent a sprayer from Home Depot. You’ll save time and money as you’ll use less product and it will go much much faster.
Question:	we have a heavy dining set and i am worried about scratches after i stain, how does it hold up to heavy chairs moving back and forth
Answer:	I have a deck/patio furniture set, including a cast iron umbrella base. Lots of use over the last year with no evidence of scratches in the deck. The stain penetrates the wood rather than building a barrier so dragging stuff across the boards won't take it off provided the wood is properly prepared.

Product features

Application

1. Use a brush, roller or sprayer to apply Ready Seal.

2. Blend multiple containers together to ensure color consistency.

3. Apply two light coats to wood surface and allow at least 45 minutes between.

4. Allow 48 to 72 hours of drying. Drying time will vary depending on temperature, humidity and surface porosity.

-Ready Seal contains no linseed oil and will not stain hands.

-Ready Seal is biodegradable when in contact with soil and water.

-Meets current VOC level requirements throughout the United States.

• PROTECTS AGAINST COLOR FADE AND PREVENTS GRAYING - #1 Deck Protects Wood From Damage Caused By Exposure to the Elements. Can Be Used On Pressure Treated Pine, Cedar, Fir, Redwood, or Most Other Softwoods. Hardwoods Will Require More Frequent Maintenance Coats.
• BOTH A DECK STAIN & DECK SEALANT IN ONE - #1 Deck Stain Is a Dual-Purpose Stain & Sealer. It Adds Color to Your Wood and Seals it, Preventing Damage Caused by Water Penetration.
• ALLOWS THE WOOD GRAIN TO SHOW THROUGH - Available in 5 Beautiful, Semi-Transparent Deck Stain Colors That Dry to Flat, Natural Looking Finishes That Will Enhance the Beauty of Your Exterior Wood.
• BETTER FOR THE PLANET, EASY SOAP & WATER CLEANUP - With Less Than 50 g/L VOC Content, #1 Deck Sealer Is a Better Choice For Our Planet. Clean Up is Super Easy - Just Use Soap and Water.
• WORKS ON DAMP WOOD, MINIMIZING THE WAIT TIME BETWEEN CLEANING AND STAINING - Once Your Wood Deck Is Visibly Dry, It's Ready to Stain.

User questions & answers

Question:	In the reviews, everyone mentions the light oak color but I don’t see it available. Is it discontinued or renamed
Answer:	I bought 2 gallons of light oak about a month ago. Look again or call the company.
Question:	Can I reapply this over the old coat when I need to
Answer:	I'd clean the boards the best you can and let them dry, and then yes, you can reapply it. It says so on the can.
Question:	How many sq ft will 2.5 gallons cover
Answer:	depends. cover says 100 - 150 sq ft per gallon. I used 7.5 gallons on about 600sq ft of deck and barely had enough, that was 2 coats. 1st coat sucked up a lot, 2nd coat went a lot farther
Question:	How many years on before having to reapply
Answer:	I live at 9000 ft. in the mountains- .wind, rain, snow, UV. I try to touch up every 2-3 years.

Product features

About SaverSystems

At SaverSystems, we understand the frustration people feel when they see what they've built deteriorate from the elements. Property is one investment you can bank on, but if it's made with concrete, masonry, or wood it needs to be protected. SaverSystems employs state of the art technology to help protect and save what you build.

SaverSystems has manufactured premium quality, water repellents and protective coatings for over 30 years. We make coatings for a variety of surfaces including wood, concrete, masonry. In addition to the #1 Deck brand, SaverSystems also manufactures DEFY, ChimneyRx, MasonrySaver, & ChimneySaver branded products.

All of our products are manufactured in our production facilities located in Richmond, Indiana. Every product is produced under strict quality standards and formulated with the highest quality raw materials available. Our innovative solutions and coatings have stood the test of time, and are trusted by industry professionals and homeowners alike.

Product description

Our sample color kit is perfect for homeowners, DIY enthusiasts, or contractors who want to test our colors on a wood deck, wood fence, wood siding, or log cabin before committing to larger purchase. If you can’t decide which of our four most popular colors is for you, then simply order a sample color kit and test them each on your own wood! Each sample kit covers up to 20 square feet. Your cost is only $10.00 with free shipping. The Woodrich Brand Timber Oil wood stain is extremely easy to apply whether you are a DIY homeowner or contractor. First time users can expect perfect results as well. It will not overlap, run, or leave drip marks because it dives deep to replenish old and dry wood. It can also be applied to new wood and is loaded with trans-oxide pigments which provides much better coverage than other paraffinic stains. Even those who have never worked with wood before can achieve a beautiful finish with this easy to use product.

• Woodrich Brand has been trusted by professional contractors and discerning DIY enthusiasts for over 15 years
• Each sample kit contains one, 2oz sample of each color
• Colors included are Western Cedar, Warm Honey Gold, Amaretto, and Brown Sugar
• Order a wood stain sample kit today to see the colors on your own wood
• Ideal for use on new construction including cedar, pressure treated pine, and other common deck, fence, and siding materials

User questions & answers

Question:	How long does it last
Answer:	Consumer Reports says semi-transparent stains last for two years and need to be recoated after two years for best appearance. Maybe longer intervals for wood in the shade.
Question:	Is this food safe? I'm using it for cheese boards and charcuterie boards
Answer:	No, this product would not be appropriate for rinishing a surface intended for contact with food.
Question:	My deck is new pressure treated pine. i live in northern illinois. deck is in direct sun light 6 hours of the day will this product hold up
Answer:	I'm in central VA and my deck is in direct sunlight from dawn to dusk. I stained my deck last spring (2017) and I won't be staining it this year. I used a plant sprayer to apply this stain and it went on easy. Just make sure you tape up and cover surrounding areas with plastic because the sprayer gets messy.
Question:	Is this compatible with log jam chinking
Answer:	We would have gone with this timber oil if they had a darker shade.

Product description

Thompson's Waterseal Waterproffing Stain - Semi Transparent, Acorn Brown. Exterior wood stain and sealer that provides complete outdoor wood protection. Formula is moderately pigmented to add beautiful color, but still show some wood texture and grain.Prevents Water Damage Advanced Polymers Provide Fade Resistant Color Coating Resists Mildew and UV Damage Applies to Freshly Cleaned Damp or Dry Wood.

• Exterior wood stain and sealer that provides complete outdoor wood protection
• Formula is moderately pigmented to add beautiful color, but still show some wood texture and grain.
• Prevents Water Damage; Coating Resists Mildew and UV Damage
• Advanced Polymers Provide Fade Resistant Color
• Applies to Freshly Cleaned Damp or Dry Wood; Color: Acorn Brown
• Exceeds Industry Standard ASTM D-4446 for Waterproofing Wood
• 1 coat protects 4 years on deck & 6 years on fences and sidings

User questions & answers

Question:	Can you use a pump sprayer for application
Answer:	I've never applied it that way. Brushing or using a pad is how I've applied it and this color turns out beautiful.
Question:	Would this work to finish a picnic table
Answer:	It will work fine as long as the lumber is dry and treated lumber is sometimes not very dry. I would put 3-4 coats on it because it soaks in quickly. If it sits in the sun, it will require re painting each year most likely.
Question:	How much coverage per gallon
Answer:	If the wood is dry particularly if it is in the sun a lot then it takes much more waterseal. I painted a fence and a deck and it took 26 gallons. I would guess the fence is 400 feet total and the deck is 24 x 24 feet. The deck had already received 8 coats of waterseal over an 8 year period and it is covered. It took much more than I expected. In fact, I had guessed it would take about 15 gallons. I must say, however, I was very pleased with the outcome both in color and durability. I will use it again.
Question:	How u apply on deck post ? Shake well before using ? How many coat needs ? I used one coat , but seems watery, next day check found not wa proof
Answer:	I had mine brushed on..A lot depends on how dried out/cracked open the wood is, as to how far in it will soak. It is watery/thin that does help for it to soak in more. It may require more than one coat.

Product features

The Thompson's Company has earned a well-deserved reputation as identifying industry trends and emerging technologies.

In the early 1920’s, polymer chemist Edward Addis Thompson developed a formula that protected buildings from exterior water damage. His discovery became known as Thompson's WaterSeal Clear Multi-Surface Waterproofer and initially was used by architectural and construction firms for concrete applications.

Product description

This item is a Cabot Solid Color Acrylic Decking Stain Acrylic Exterior Neutral Base Opaque 1 Gl. Purpose of use for Painting Supplies, household-wood-stains. This product is manufactured in United States.

• Stains have a acrylic base,
• Grease stains, dirt pick-up and allows for
• The product is manufactured in United States
• Which helps the coating to repel barbecue and