12 best skil table saws

Product description

The SKIL TS6307-00 10" Jobsite Table Saw has a 25-1/2” (64.77cm) Rip Capacity and is equipped with a 15-Amp motor, integrated foldable legs, rack & pinion fence rails, and a dust port elbow to keep your jobsite clean. The 15-Amp motor quickly rips through hardwoods with ease, while the rack & pinion fence rails make fence adjustments fast, smooth, and accurate. With its 0-45° bevel capacity, the quick release lever allows for cuts between two positive stops at 0 and 45 degrees, and its 4x4 cutting capacity allows for swift 90-degree cutting. The integrated foldable legs seamlessly form into a folding stand to provide portability and convenience, while the dust port elbow systematically redirects dust to a container for easy cleanup.



This large coated cast aluminum tabletop saw comes equipped with a 10”, 24-tooth carbide blade. The parallel blade alignment allows for ease of blade adjustment along the rip fence and miter slot, for precise accurate cuts. This table saw features a safety anti-restart switch in case of power outages.

• RACK AND PINION FENCE RAILS – Ensures fence stays parallel to blade for fast, smooth, and accurate cuts
• INTEGRATED FOLDING STAND – Legs quickly fold in to provide portability and convenient storage
• PARALLEL BLADE ALIGNMENT – Available micro-adjustment of blade so that it is parallel to rip fence and miter slot
• 4x4 CUTTING CAPACITY – Cuts material up to 4x4 at 90 degrees
• 2-47° BEVEL CAPACITY – Cuts between 2 positive stops at 0 and 45 degrees with quick release lever
• DUST PORT ELBOW – Redirects dust to a container for easy cleanup

User questions & answers

Question:	Does it come with a blade
Answer:	Yes it comes with a blade! Not one of the best but it will get you started.
Question:	Will the saw sit flat on a work bench when legs are folded up
Answer:	Hello, Yes this saw can sit plat with the table folded up underneath. Thank you for your inquiry!
Question:	Is the miter slot a standard 3/4" size
Answer:	Yes
Question:	Why is Amazon humping the Skil router with this saw? Can you mount it from underneath and make a router table
Answer:	No. You can't attach a router to this table saw. A recommended table for the router could be the Skil RAS900 Router Table.

Product description

The 10-inch Heavy Duty Worm Drive Table Saw is the latest addition to SKILSAW’s table-saw lineup. SKILSAW’s legendary Worm Drive power train delivers superior torque, an aggressive 3-5/8-inch depth of cut, and 30 ½-inch rip capacity. Tear through plywood and slice 4x with ease and precision. The rack and pinion system makes fence adjustments quickly and smoothly for accurate cuts. SKILSAW’s patented Dual-Field Motor runs cooler so it can work harder, longer. The rugged stand delivers dependable stability, and the sixteen inch wheels easily take the stairs and roll over uneven surfaces to just about anywhere you need to set up and let it rip.

• Legendary worm drive gearing with 3-5/8 inch depth of cut and 30-1/2 inch rip capacity
• Precision rack and pinion fence system makes fence adjustments quickly and smoothly for accurate cuts
• Rugged rolling stand with 16 inch Wheels and easy-load handles delivers unsurpassed mobility
• Dust port elbow contains debris to 1 area for clean-up
• Outfeed and left support allow for larger cuts to be made by 1 person

User questions & answers

Question:	Can you install a vacumm
Answer:	Good afternoon. From what I can find the RK7321 is a heavier built unit with a little more metal and less plastic and includes a wall mount which is not indicated with the RK7323.
Question:	What are the dimensions of the saw unit when off the stand/cart? I’m wanting to store the stand and saw separate for space considerations
Answer:	I bought the saw for just this reason, and was dissatisfied enough that I sent the saw back. The specs say that it will cut wood 1½" wide. Standard pinewood derby cars are 1¾" wide, so they're out of spec, and I can tell you from experience that it's definitely too much for the saw to handle. Even trying to make vertical cuts through the car body, which is only 1¼" tall, is too much for this saw. I tried a bunch of other scrap pieces of wood of varying widths, and with varying (better quality) blades than are included in the kit. I couldn't get the saw to make satisfactory cuts on anything wider than ½". So if you want to make pinewood derby cars, you're better off spending $50 more or so for a small band saw.
Question:	Does anyone know how big is the shipping box? I want to order this to my postal box and I need to know if I can load it in my trunk
Answer:	I have found 1.5 " to be the maximum. I have cross cut 2 x 3s, & ripped a 2x2 (32" long) down to create a custom 1 1/8" for repairing a hollow door--- However that long rip cut took about 10 minutes, using a 'fast' cut blade. It is very slow going on a rip cut-- like 1 mm per 2 seconds. I would expect it would also be very slow on 1" hardwood. It is okay for crosscuting lumber & scroll work & custom part making (slow cuts)... But not a heavy duty machine for production parts
Question:	Is skilsaw spt70wt-01 the same saw as skilsaw spt99-11 just without the stand/wheels
Answer:	It's made of hard black plastic.

Product features

10 In. Heavy Duty Worm Drive Table Saw

The 10-inch Heavy Duty Worm Drive Table Saw is the latest addition to SKILSAW’s table-saw lineup. Featuring the legendary Worm Drive power train this table saw delivers superior torque that rips through wood with ease. With an aggressive 3-5/8-inch depth of cut, and 30-1/2-inch rip capacity this table saw can handle materials without bogging down. The heavy-duty table saw has a best-in-class 15-amp Dual-Field Motor that powers and keeps the motor cool through continuous cuts and ripping through full sheets of plywood and 4x material.

The rack and pinion system makes fence adjustments quickly and smoothly for accurate cuts. The rugged stand delivers dependable stability, and the 16 In. wheels easily take stairs and roll over uneven surfaces to just about anywhere the saws needs to set up. Ideal for applications such as ripping and cross-cutting. Works with soft, hard and engineered woods.

Included with the SPT99-11 is rolling stand, 24-Tooth SKILSAW carbide blade, miter gauge, smart guard system including anti-kickback device, dust elbow, insert plate, push stick, wrench and rip fence.

Legendary Gear Train

The newest addition to the SKILSAW table saw family, the heavy-duty table saw has the legendary worm drive gearing. It has a powerful 15 Amp motor and a 5,000 no-load RPM.

Accurate Cuts

The rack and pinion systems quickly adjusts settings for accurate cuts.

Minimal Cleanup

The dust port connects to a standard 2-1/2 in. vacuum hose. The included dust elbow allows for minimal clean-up.

Durable Stand

The stand easily goes anywhere on the jobsite. Featuring 16 in. wheels this stand can handle uneven surfaces, go over stairs and be pushed into the bed of a truck without having to remove the saw from the stand. Also has built-in left side support for cutting large material.

Product description

The 8-1/4 inch Portable Worm Drive Table Saw delivers our legendary Worm Drive power in a light, portable design. Created for jobsite productivity, this compact powerhouse features a 2-5/8 inch depth of cut and 25 inch rip capacity to tear through sheet goods and slice up to 3x. Durable, all-metal construction stands up to jobsite abuse. The rack and pinion system makes fast, smooth fence adjustments for precise cuts. Our patented Dual-Field Motor stays cooler, so it can work harder, longer. Now you don’t have to sacrifice power and torque to get a table saw that’s easy to transport.

• Legendary worm drive gearing offers maximum torque for ripping applications
• Precision rack and pinion system makes fence adjustments quickly and smoothly for accurate cuts
• Light weight and compact footprint make it easy to move around the jobsite
• Tear through sheet goods and slice up to 3x with the 2-5/8 inch depth of cut and 25 inch rip capacity
• All-metal construction delivers legendary durability

User questions & answers

Question:	Can you use a dado set on this saw
Answer:	With the foot activator mounted on the inside the foot print measures 27" x 21.5". With the activator on the outside the measurements are 33.5" x 21.5". These were measured at the floor level. The fiber board table top is 23" x 20". I hope this helps.
Question:	Is it able to rip a 2x4 at a
Answer:	1 speed
Question:	will this fit a skilsaw 3310? the design looks similar
Answer:	I think it north or south carolina
Question:	has this been shipping with just a skilsaw blade and not a diablo blade ? thank you all
Answer:	one

Product features

Stellar Power and Performance

With the SKILSAW SPT99T-01 8-1/4" Portable Worm Drive Table Saw, you will be able to perform the toughest of applications with ease. No matter what type of cut you want, this handheld circular saw allows you to work seamlessly on various materials. Compact, lightweight and convenient to carry around, this saw by SKILSAW is reliable and has the largest capacity that delivers relentless power for toughest of applications.

Excellent Maneuverability

As this circular saw comes with a precision rack and pinion system to make fence adjustments quickly and smoothly, you can be ensured of accurate cuts every time. The all metal construction for durability and reduced weight allows you to place this saw on any flat surface for woodwork.

Tough Applications Made Easy

Smooth and precise, the SKILSAW SPT99T-01 8-1/4" Portable Worm Drive Table Saw is an investment that will not let you down. With stunning features, you will be able to get the cuts you desire for woodwork and other fabrication while being safe from mishaps.

Product description

The SPT70WT-ST is designed exclusively for use with the SKILSAW SPT70WT-01 10 in. portable Worm Drive table saw. The stand features tool-less latches to secure saw to stand quickly. Users can level stand on uneven surfaces with easy leveling adjustment. The portable jobsite stand is lightweight with a folding design for easy setup and transportation.

• Exclusively designed for use with SKILSAW SPT70WT-01 10 In. Portable Worm Drive Table Saw
• Folding design and tool-less latches provide for fast and easy setup and transportation
• Easy leveling adjustments
• Durable all-steel design
• Only 14 lbs. for effortless portability

User questions & answers

Question:	Can a ridgid brand table saw attach to this item
Answer:	This table saw stand is designed specifically for the Skilsaw Worm Drive Table Saw SPT70WT-22. It has not been tested for use with other brands or models.
Question:	Will this work for a skilsaw
Answer:	Excellent question! It will not, as this stand was exclusively designed for use with SKILSAW SPT70WT-01.
Question:	Could someone please provide the dimensions of the top part where the saw sits? Thanks
Answer:	I don't have the stand, but at Home Depot I measured the Skil SPT70WT table saw's bottom rails that fit to it, which must be close to the same - they sit right over it. The table saw base is a rectangle of steel tubes, so there are inside and outside dimensions. The tubes are 1-1/4" OD. Tbl saw base Inside dimensions : 21-5/8" x 17-1/2" Tbl saw base Outside dimensions : 24-1/8" x 20" From the photos, it looks like the stand might be a tad longer in the longer (width) dimension.
Question:	Will this work with the SPT
Answer:	Hi Terry! This stand is exclusively compatible with our SPT70WT-01 10" Portable Worm Drive Table Saw. Thanks for your question!

Product description

Includes 2610958897 Rip Fence. New, Bulk Packed. Genuine OEM replacement part. Consult owners manual for proper part number identification and proper installation. Compatible with : Skil 3305 (F012330500) Table Saw

• Sold on Amazon

User questions & answers

Question:	Whats the range of distance between rails this fence can accommodate? (the distance between the front and rear clamp teeth, +/- the adjustment range
Answer:	16.5 inches.
Question:	is this compatible with 3400 skil saw
Answer:	Mine is 3305

Product description

Includes 2610958888 On/Off Switch. New, Bulk Packed. Genuine OEM replacement part. Consult owners manual for proper part number identification and proper installation. Compatible with : Skil : 3305 (F012330500) Table Saw, 3310 10" Table Saw

• Includes 2610958888 Switch
• New, Bulk Packed
• Genuine Skil Replacement Part
• Consult owners manual for proper part number identification and proper installation
• Please refer to list for compatibility

User questions & answers

Question:	Will this switch work for model
Answer:	I just bought this for my old 3400 and it fits perfectly.

Product description

Includes 2610958888 On/Off Switches. New, Bulk Packed. Genuine OEM replacement part. Consult owners manual for proper part number identification and proper installation. Compatible with : Skil : 3305 (F012330500) Table Saw, 3310 10" Table Saw

• Includes 2610958888 Switches
• New, Bulk Packed
• Genuine Skil Replacement Part
• Consult owners manual for proper part number identification and proper installation
• Please refer to list for compatibility

Product description

With the capabilities of a standard miter and table saws, the compact SKIL flooring saw model 3601 allows you to cut flooring right where you're installing. Durable, lightweight and portable, DIYers and flooring specialists agree it makes wood floor installation easier and faster.

• Cuts solid, engineered and laminate flooring with ease
• Makes cross, miter and rip cuts
• Lightweight design for transport and use at any project location
• Miter detents at 0, 22.5 and 45 degrees
• Die-cast aluminum miter and rip fence

User questions & answers

Question:	How is the second 45deg cut made on 1/4 round to make piece for the 90deg corner? It’s obvious how to make the 1st 45deg cut, not the seoncd
Answer:	No, the DCCS620P1 does not include a case.
Question:	How well does it handle rip cuts? (specifically for the last row of a floor where you may need to rip the entire length of a board
Answer:	The 20V batteries come in Amp ratings. 2 Amps, 4 Amps, 5 Amps, 6 Amps. For more powerful tools like the Chainsaw, or Leaf Blower or Sawzall Recip Saw, you need 5 Amps and up. Therefore, while you could use any 20V battery, it would drain too fast and damage the battery. The reason the smaller 2 Amp batteries are useful is because they are lighter and you have less hand fatigue using smaller power tools like drill and impact driver. They do fine with 2 amp batteries.
Question:	Is there a dust collection hookup? How much mess does it make
Answer:	Works amazingly well. Cut a tree with about a 16" diameter into pieces. Great saw. Will never buy gas again. (Even after rebuilding carb and replacing feul lines and filter my gas saw gave me troubles)
Question:	How well will this saw cut waterproof vinyl flooring? Is there a special blade I would need
Answer:	The chain is pre sharpened. I also improved mine by using a 14" oregon bar and chain with a guage of 0.50 instead of the 0.43 guage. This saw is powerful enough to use a 14" bar and the 0.50 guage seems to cut much faster.

Product features

Lightweight Design

Easy to transport and use at any project location.

Cross, Miter and Rip Cuts

Cuts through solid hardwood, engineered and laminate flooring.

Miter Gauge

Detents at 0°, 22.5° and 45°, giving flexibility for different types of cuts.

Die Cast Aluminum Miter and Rip Fence

Sturdy, stable and durable miter and rip fence.

More About This Product

• Amperage: 7.0
• Rating: 120V
• No Load RPM: 11,000
• Blade Diameter: 4.375”
• Miter Angle Range: 0°, 22.5° and 45°
• Weight: 24 lbs.

Product description

Maximized for accuracy and capacity this DEWALT DWE7485 8-1/4 in. table saw includes on-board storage for blade guard assembly, non-through cut riving knife, anti-kickback pawls, blade change wrenches, miter gauge and push stick. The powerful DEWALT 15 amp, 5800 RPM motor allows users to complete a majority of applications. The rack & pinion fence allow for fast, easy adjustments and provides the capacity to rip 4x8 sheet goods.

• Portability: Compact size for ease of transportation and storage
• Easy adjustments: Rack and pinion telescoping fence rails make fence adjustments fast, smooth and accurate
• Variety of cuts: 24.5 inches of rip capacity for ripping 4x8 plywood or OSB sheets
• Power: 15 Amp, 5800 rpm motor
• Onboard storage: Onboard storage provides easy access to the site pro guarding components and push stick when not in use
• Guaranteed tough: Metal roll cage ensures job site durability

User questions & answers

Question:	Can i mount the axtra 8-outlet power strip on the table saw
Answer:	We do not recommend modifications on our tools as they are designed to work as is. If you are meaning plugging it in to a 8 outlet powers strip: that is not recommended. This unit should be plug into a direct outlet of using the appropriate extension cord ( VOLTS, LENGTH and WIRE GAUGE)
Question:	What are the dimensions of the unit on the stand when closed up. WxHxD? Need to know if it will fit in the storage cubby I have in the garage
Answer:	Laid down flat - 27 1/2" wide, 46" long (you can take about 3" off this by using the shorter handle length slots), 25" high with rail on (21 1/2" with it off). You can stand it up or lay it down - either works.
Question:	Does this saw accept dado blade set
Answer:	Yes, you will need the Dado Throat Plate which is DeWalt Part Number DWE7402D1. Per DeWalt, do not attempt to stack dado blades thicker than 13/16" (20 mm). Do not use dado blades larger than 8" (200 mm) diameter. Since dado cuts are not thru-cuts, the cuts must be performed with the blade guard assembly removed. To remove the blade guard assembly, pull riving knife/blade guard release lever and pull up on the guard or riving knife to remove. When using the dado, the special dado insert (also sold as an accessory) must be used.
Question:	How good would this saw be for a beginning woodworker on a limited budget
Answer:	It's a great saw. It has some safety features that I love. If you have a limited budget I would recommend that you stave for a couple of days and buy this saw. It is bulky and it's gonna cost you a little over $600 out the door but it's worth it. Remember when buying tools try to buy the best you can find. You don't want a cheap tool to stop working in the middle of the day.

Product description

SKIL 3540-02 7" Wet Tile Saw complete tiling projects easily with the model 3540, 7 in. Wet Tile Saw. The stainless steel top resists corrosion and the adjustable rip fence with miter gauge ensures accurate straight and miter cuts. Skil 3540-02 7" Wet Tile Saw features: Stainless steel table top is resistant to corrosion adjustable rip fence with miter gauge for accurate straight and miter cuts 0-45 degree level for a wide range of cuts blade cooling water reservoir to keep blade cool and minimize dust and debris 7" diamond blade for fast and smooth cutting SKIL 3540-02 7" Wet Tile Saw specifications: Amperage: 4.2 Arbor Size: 5/8" Bevel angle range: 0-45 degrees Bevel Stops: 0 Degrees, 45 Degrees Blade Diameter: 7" Depth of Cut at 45 Deg. : 1" Depth of Cut at 90 Deg. : 1-3/8" Length: 14" Name: 3540 (S12) No load RPM: 3600 Voltage: 120V AC only weight (lbs. ): 18 Width: 13.25."

From the Manufacturer

Skil benchtop power tools are quality tools at a great price!

• Corrosive resistant stainless steel top supports tiles up to 12 x 12-inch
• Adjustable rip fence with miter gauge for accurate straight and miter cuts
• Blade cooling water reservoir to keep blade cool while minimizing dust and debris
• Bevel cuts tile from 0 to 45 degrees. Cut material: Stone/Masonry
• Cross cut capacity: 7.75-inch; Diagonal cut capacity: 7.25-inch

User questions & answers

Question:	this saw comes w/a diamond blade. would it be good enough to cut little glass mosaic tiles or should I order a different diamond blade
Answer:	The blade will cut through the glass tiles just fine, however, I would suggest purchasing a thinner more durable blade. I purchased a Ridgid 7" blade from Home Depot. The Ridgid blade make cleaner cuts and wastes less material because it is a thinner blade.Also, Skil just came out with a new updated model of this saw. I would suggest purchasing that saw instead because it has some much needed improvements. Here is some information on the new saw: https://www.skiltools.com/Tools/Pages/ProductDetail.aspx?model=3550-01.
Question:	What is the biggest size of tile this saw can be used for to do diagonal cuts
Answer:	am sure you can cut even 24x24 in. tile. to cut straight get 1x1x 20--24 in, wood and clamp under the table as your guide to cut straight,hope this will help. skil power tools are great and cheaper than MK
Question:	Would this be a good saw to cut rocks in half
Answer:	Depends on the size of the rock. The material is not an issue -- I use it to cut agates and quartz up to a couple inches in size. The important thing is to go slow and make sure to keep the cut wet.
Question:	Will this saw cut peanut brittle? We are currently struggling with the batch we just made and we need to find a good way to cut it
Answer:	i'M SORRY, BUT NO THIS WILL NOT CUT THE BRITTLE. this saw was designed for tile, brick and old tootsie rolls only. the reason tht is, the hamsters in the the motor are allergic to peanuts and a few other foods. seeing as how we all love fluffy hamsters, they gave them work instead of turning them away( that and hamsters have a ton of kids!!). the saw you are looking for has gophers in the drive motor( 2 x's the power for those thick piece's of brittle), that have been thoroughly screened for any deadly allergies to tree nuts and dairy, not to mention sock puppets and shoe polish as well. i do suggest that if you are going to buy the gopher powered brittle slicer 3000xlr made by Skill'dG( skilled gophers), to make sure you are getting the real thing, and not a cheap australian clone. contact the gopher union work force development office and they will give you a list of all non gopher supported and wallaby knock offs and a wallet sized card for easy recognition of their branded products. They may ask for a donation, but it's well worth the $120 to join their non members club. You get free holes in your green, and much, much more. Good luck on your quest, and may the spork be with you.

Product features

Stainless Steel Table Top

A stainless steel top will resist corrosion after multiple uses.

Adjustable Rip Fence with Miter Gauge

The adjustable rip fence with miter gauge will allow you to make accurate and straight miter cuts.

Bevel Cuts Tile

For more intricate designs or to tackle those end pieces, the 0-45 degree bevel will provide flexibility for various cut types.

Blade Cooling Water Reservoir

The constant flow of water keeps blade for overheating and helps minimize dust and debris while cutting tile.

More About This Product

• Amperage: 4.2
• Rating: 120V AC Only
• No Load RPM: 3,600
• Blade Diameter: 7 In.
• Miter Angle: 0-45 Degrees
• Bevel Positive Stop at: 0, 45 Degrees

Product description

Whether you're updating or renovating, adding tile to your kitchen or bathroom is now easier than ever with the SKIL 7-inch Wet Tile Saw (3550). The saw's innovative HydroLock System keeps water splash to a minimum so tiles can be cut in the room where they're being installed. You no longer need to go back and forth to a saw set up in the garage or outside to cut the tiles, so the SKIL tile saw with HydroLock System helps you finish the project faster too The 3550 works with a 7-inch continuous rim diamond blade, which provides efficient and even cutting. It also comes equipped with a durable rust-resistant aluminum table top and a sliding side extension that can be used to support tiles up to 18 x 18-inch.

• Hydro lock water containment system keeps water contained near the blade and reduce clean-up time
• Sliding side extension provides support for tiles up to 18 x 18-inch
• Aluminum table top is a durable, rust-resistant surface
• Adjustable rip fence with miter gauge for accurate straight and miter cuts
• Bevel cuts tile at 0, 22.5 and 45 degrees, giving flexibility for different cut types

User questions & answers

Question:	will this saw, with the standard blade that comes with it, cut glass bottles
Answer:	I don't know for sure. I did cut quite a lot of glass tile. I had to a different blade for glass. it did an exceptional job. In fact i used it to install 2500 sqft of tile in my house. It still has good life left in it.
Question:	Need to slice 1/8"-1/2" glass rods coe 104 & 32. Slice cylinder= thickness of rod & length of 4mm. cut should be clean but not pristine. Will thiswork
Answer:	Thank you for your question. The Skil 3550 is not designed for cutting glass, it is designed for cutting tile. If you have further questions please feel free to contact our Skil Customer Service Representatives at 1-877-754-5999
Question:	Does this include a blade? The info @ Amazon says bare tool, yet the Skil website says yes
Answer:	Yes, the blade is included. The tile saw includes the 7 in. Diamond Blade, Side Extension, Rip Fence, Miter Gauge, Blade Guard and Blade Wrench.
Question:	Why is this model so much more expensive than the model is replaced? The 3540-02 was half this price, so what is the difference
Answer:	Thank you for your question. The Skil 3550 can cut tiles up to 18x18 inches, has an aluminum table top and also our Patent Pending HydroLock System which is an innovated upper and lower guard design that keeps water contained near the blade. The Skil 3540 cuts tile up to 12x12 inches, has a stainless steel table top and does not have the HydroLock System. If you have further questions please feel free to contact our Skil Customer Service Representatives at 1-877-SKIL-999 (1-877-754-5999).

Product features

SKIL 3550-02 7-Inch Wet Tile Saw with HydroLock Water Containment System

Whether you're updating or renovating, adding tile to your kitchen or bathroom is now easier than ever with the SKIL 7-inch Wet Tile Saw (3550). The saw's innovative HydroLock System keeps water splash to a minimum so tiles can be cut in the room where they're being installed. You no longer need to go back and forth to a saw set up in the garage or outside to cut the tiles, so the SKIL tile saw with HydroLock System helps you finish the project faster too! The 3550 works with a 7-inch continuous rim diamond blade, which provides efficient and even cutting. It also comes equipped with a durable rust-resistant aluminum table top and a sliding side extension that can be used to support tiles up to 18 x 18-inch.

Product description

This zero clearance insert plate will fit snugly around the blade to reduce the risk of thin off-cuts getting wedges, it is a must have for precision wood cuts! Designed for SPT99 and SPT70WT.

• For precision cuts at 90°
• Reduces kerf clearance to thickness of blade
• Designed for SPT99 and SPT70WT
• Item Package Dimension: 13.98" L x 0.41" W x 4.53" H

User questions & answers

Question:	Is this insert Spt99-11 compatible
Answer:	Hello, This insert is compatible with the SPT99. Thank you for your inquiry!
Question:	Is this compatible with spt99-12? 10 inch blade
Answer:	Hello, Yes this accessory is compatible with SPT99. Thank you for your inquiry!
Question:	Does this fit the 8 1/4" spt99t as well
Answer:	Hello, This is not compatible as the zero clearance insert that the SPT99T uses is the following, SPT5004-ZC. Thank you for your inquiry!
Question:	Does this fit the TS
Answer:	Hello, This insert is not compatible with the TS6307. Thank you for your inquiry!