10 best laser woodworkings

Product description

You will find numerous uses for this portable dust collection/air handling unit. Great for woodworking machines and laser engraving. It uses a compact but powerful 1. 5HP 110/220V motor to move air to over 850 CFM. Light-weight and portable at 46 pounds. Prewired for 110V. Comes with instructions to convert to 220V. 1 phase. 18amps at 110V. Max Static Pressure 8. 5". 9" Steel Impeller. 3450 RPM. 4" Inlet. 4" Outlet. Bag and hose are not included.

• 1. 5 Horsepower; Air Flow 850 CFM; Maximum Static Pressure 8. 5"; 9" Steel Impeller; 3450 RPM; 4" Inlet and Outlet
• Unit comes pre-wired for 110 volt; Single phase; 18 amps; Includes instructions to convert to 220 volt
• Portable dust collection air handler motor blower unit weighs only 46 pounds; Casters are included
• Great for woodturning projects, laser engraving, woodworking machines, 3D printers, and more
• Bag and hose are not included

User questions & answers

Question:	Are the impellers steel or plastic
Answer:	The impeller is made of 3/16" steel and in my use for it, it will suck up blown in insulation and discharge same material through the outlet port. They do make a heavier DC250SEMB which has a 2 hp electric motor on it with a 2 - 4" input and a single 5" exhaust, rated 1350 cm, which is not listed on Amazon for some reason. I purchased directly from Penn State Industries
Question:	What size solids will pass through the impeller? I would like to use it in my wood shop. Planer, joiner, table saw, etc
Answer:	no
Question:	Does a bag come with the dust collector? If so, what micron
Answer:	I have installed several of these units. Depending on how you vent the machine (piping, piping size, length ) you will range from roughly 11.3 to 12.5 amps.
Question:	how many amps does the unit draw
Answer:	Yes, they will. It is just a clip.

Product description

Making sure your project is level can be a chore, but not with the Laser Level with Mounting Accessories from Black and Decker . The BDL220S s 360 rotating wall attachment projects a laser line at any angle for quick and easy leveling. The laser level also includes two bubble vials with backlights for increased visibility of bubbles. Amazon.com Ideal for hanging pictures along a stairwell, hanging mirrors, installing curtain rods, and other domestic items, the Black & Decker BDL220S Laser Level projects vertical and horizontal laser lines for accurate placement of objects. Its 360-degree rotating wall attachment projects a laser line at any angle and two extra large backlit bubble vials are provided for maximum accuracy and visibility. Categorized as a class II laser, this laser level comes backed by a 2-year limited warranty. This is a Class 3R laser product, Power output ≤ 5mW.

Ideal for hanging pictures along a stairwell, hanging mirrors, installing curtain rods, and other domestic items, the Black & Decker BDL220S Laser Level projects vertical and horizontal laser lines for accurate placement of objects. Its 360-degree rotating wall attachment projects a laser line at any angle and two extra large backlit bubble vials are provided for maximum accuracy and visibility. Categorized as a class IIIR laser, this laser level comes backed by a 2-year limited warranty.

From the Manufacturer

The Black & Decker BDL220S laser level is the ultimate helper for hanging pictures, shelves, curtain rods, mirrors, and more. Attach the unit to a wall and point the laser in whatever direction you need to see a straight line. With a base that rotates 360 degrees, the laser beam can display at nearly any angle--a must for projects like hanging pictures along a stairway. Two extra-large bubble vials with backlights make it easy to straighten the laser line as well as use the unit as a conventional level. The BDL220S comes with a 2 AA batteries plus a protective storage case and is covered by a 2-year warranty.

• 360-degree rotating wall attachment projects a laser line at any angle
• Two extra large backlit bubble vials are provided for maximum accuracy and visibility
• Ideal for hanging pictures along a stairwell, hanging mirrors, installing curtain rods, and other domestic items
• Categorized as a class II laser
• 2-year limited warranty
• Included Components: BD220S Laser level, AA Batteries, Wall Attachment
• 360-degree rotating wall attachment projects a laser line at any angle

User questions & answers

Question:	Could I use this level for writing or sewing
Answer:	Very good
Question:	This product comes with a external cover as the picture
Answer:	8 1/2 " x 8 1/2" w. 4 " thick
Question:	how does the level attach to the wall
Answer:	Only if they vertical or horizontal.
Question:	Will this securely mount on the head of a shark
Answer:	Yes, but within a range of about +/- 10-15 degrees. Any more than that and it flashes to let you know it's not level

Product description

Meet your new favorite workhorse, the Pegasus. This multi-function work table and sawhorse with quick clamps and holding pegs can support up to 300 lbs as a table, and up to 1,000 lbs as a sawhorse! The legs lock into place and are made of tough molded ABS with steel supports, and the non-slip feet stay in place on both grass and pavement. Yet the Pegasus itself is only 25 lbs, so you can fold it up and carry it anywhere, or keep it in the back of the truck. The integrated clamping system exerts up to 300 lbs of force to keep your project firmly in place, and has a max clamping width of 18 ¼”. And the clamp dog pegs allow you to secure round and oddly shaped materials. This table is 31” x 25” and is a standard 32” high, so it can be linked up with our other Worx tables, and other Pegasuses, to make a longer, fully-functional work table. (Link locks are included.) And the folding tray at the base is designed to hold tools, power strips, or anything you need on the job. The Pegasus is tough and solid enough to be a permanent work table or sawhorse but built to be portable, so you can take it from job to job, or from the basement to the garage without a problem. And it folds down to a depth of only 5”, so it’s easy to store when you’re not going to be using it for a while.

• [WORKTABLE & SAWHORSE] Holds up to 300 lbs. as a work table, supports 1,000 lbs. as a sawhorse. And it’s easy to transition between the two
• [CUSTOM CLAMPS] Two quick clamps are integrated and stay attached even when you fold the table into a sawhorse. Because they’re designed specifically for the Pegasus, they’ll be stronger and last longer
• [LIGHT AND STURDY] It’s only 25 lbs., and its foldable design makes it easy to move and store
• [CONNECT MULTIPLE TABLES] Create a whole work counter when you link 3 or more Pegasus’ together. Whether your worksite or workshop is spacious or tight, this building solution expands or contracts to fit your needs
• [DO IT YOURSELF. DO IT BETTER. DO IT WITH WORX.] WORX tools are engineered with cutting-edge technology, and above modern efficiency standards, so you can build a cost-effective tool collection that’s been designed to last
• [STORAGE SHELF] On the bottom of the work Pegasus we’ve made a place to hold a power strip or supplies. Perfect extra shelf or storage for your workspace
• [BUILT TO LAST] Made out of a dependable, molded ABS with steel supports and fittings. This table will be with you for the long haul

User questions & answers

Question:	can i use this worx Pegasus for 12" miter saw stand
Answer:	Yes. Use the dogs and clamps to hold it in the center. You might want to put small sand bags on the legs to minimize shake creep
Question:	How wide can the clamps go? What is the widest I could clamp
Answer:	Thank you for your inquiry. The max clamping width is 18 inches.
Question:	Would you consider this table to be sturdy? And are the clamps good quality
Answer:	This a very sturdy table! I use it to put my radial arm on! The clamps are the same as on my Worx Sawhorses (which I also highly recommend). I use ONE to clamp my lawnmower blade when I use my angle grinder to sharpen it and it holds it VERY firmly! I would recommend getting the saw horses also as they are the same height and help support bigger pieces. I highly recommend both of them. Enjoy!
Question:	Is this the same Pegasus table for sell at the big box store for
Answer:	Yes, this would be the same unit that is sold in the local retail stores however, the price will vary per location.

Product features

Integrated Clamping System

Even though they’re removable, the clamps are designed for the Pegasus, and are optimized to give you the power and support you need.

Adaptability

You can build yourself an entire workbench by attaching another Pegasus or other Worx tables like the Sidekick or Clamping Sawhorse. All 3 are the same height and use the same joiners.

Foldable for Easy Transport

It’s only 30 lbs and fits right under your arm, so you can throw it in the back of the truck and take it to the job site, or from the basement to the backyard.

2 Bar Clamps and 4 Clamp Dogs

The bar clamps exert 300 lbs of force to keep almost any project firmly in place, and the clamp dogs are designed to hold circular or oddly shaped pieces. Pegasus can hold most projects as a result.

Built-In Measuring Guides

Never worry about misplacing the tape measure or a yardstick. This handy measuring guide is indispensable.

Collapsible and Lightweight

Pegasus folds easily and quickly into a form that’s made to be carried. And 30 lbs is light for a sawhorse. If you work in a lot of places, Pegasus is the table and sawhorse for you.

High Load Capacity

As a worktable, Pegasus can support up to 300 lbs, but folded down into a sawhorse, it can hold up to 1000 lbs. It may be light, but it’s engineered to be sturdy.

Product description

DEWALT 12V 3 x 360 Green Beam Line Laser is great for various leveling and layout applications. This unit is used for projecting bright crossing horizontal and vertical lines. It features green beam laser technology which is four times brighter; the green laser diodes are more visible than red and allow for a greater visible range in interior applications along with better exterior visibility. This unit offers 360 degree line lasers to aid in full room layout. A full-time pulse mode allows use with a detector. It also has an integrated magnetic bracket with 1/4" and 5/8" thread, an over-molded housing and IP65 water/debris resistance, along with a lockingpPendulum that helps t prevent damage to internal components. The 12 volt battery compatibility allow for long run times with the convenience of rechargeable power tool batteries. Includes: Blow Mold Case , Extended Ceiling Bracket , 12v Battery, Charger , 12v Green 3 x 360 Line Laser. This is a Class 2 laser product, Power output ≤ 1.5mW.

• 3 360 degree line lasers to aid in full room layout
• Height (inch) 12.5 inch, Overall length (inch) 6.125 inch, width (inch) 17.75 inch. A Green beam laser technology, which is four times brighter than red
• Integrated magnetic bracket allows for flush attachment to metal track and steel. Suitable for indoor visibility range is 100 feet. The working range is 165 feet. DO NOT use aggressive cleaning agents or solvents
• Over molded housing and IP65 water/debris resistance. Power Tool Type: Cordless
• Part of the 12V lithium ion rechargeable power tool battery platform
• Accuracy : +/ 0.125. Class 2 laser with an output power of less than or equal to 1.50mW

User questions & answers

Question:	can you use this for foundations with a laser line detector
Answer:	Yes, the laser light is sharp and steady.
Question:	Can this unit be used in an outdoor application with a tripod and grade rod with the green laser detector? If so what's the range and accuracy
Answer:	The early production ones did but that was a long time ago. The 2nd one I bought didn't have a bag. Old photo!
Question:	Does this laser give cross hairs
Answer:	Mine (bought 2/20/15) has a nail you put in the wall and it attaches. :( Wish I had noticed it before buying.
Question:	Comes in box
Answer:	I think it’s urban legend.. but I’ve heard they discontinued the shark head gimbal due to “ user error “

Product description

The DEWALT DWS779 12" Sliding compound Miter saw features a powerful 15 amp, 3,800 RPM motor that delivers extended power and durability. It has a super-efficient dust collection system that captures over 75 percent of dust generated. This miter saw also offers an exclusive back fence design which cuts up to 2x14 dimensional lumber at 90° and 2x12 at 45°.

• Your purchase includes: 1 CDEWALT DWS779 sliding compound cord miter saw, 12-inch, carbide blade, 1 blade wrench
• Tool dimensions: 17” H x 24.75” L. Tool weight: 56 pounds; Maximum cutting thickness: 6.75 inch
• Other specifications: 15 Amps, 12” blade diameter, 5/8” or 1” Arbor size. 3800 RPM motor. Type of milter saw: Slide
• Exclusive back fence design cuts up to 2x14 dimensional lumber at 90 degree and 2x12 at 45 degree. Miter saw does not come with LED (sold separately) or laser cutting guide
• Super-efficient dust collection system captures over 75 percent of dust generated
• Backed by Dewalt's 3 year limited warranty

User questions & answers

Question:	Is the current model that is shipping type 1 or type 20. If you look up the parts diagram the type 20 has a different slide mechanism part number
Answer:	I bought a new one today from a lumberyard and it is a Type 1. (says right on the sticker on the motor) Not sure if that means the slide mechanism is better or worse than the Type 20. I would assume it was made in 2014 because there is a "Dewalt use only" tag on the box which starts with 2014. Not sure if a "fresher" saw is a Type 20
Question:	Can xps be added, i know dewalt makes a kit to add it to some saws, but this model was not listed
Answer:	mmToolparts actually sells a kit (3 proprietary DeWalt parts + their wiring harness) for less than $70. They have videos on their website that show how to install the parts on DW716, DWS779, and DWS782 saws. You will need some additional tools (torx screw drivers or torx bits, wire strippers/cutter/crimper) and somewhat mechanically inclined. Just google "DWS779 xps light kit" and they should be the top result. This might be an easier option versus going to a DeWalt service center in the post pandemic world.
Question:	Does this miter saw come with a laser or any guiding system
Answer:	It does not come with any laser for guidance. You may find my answer a bit crude, I've been using miter saws for many years and the best guiding system I found to work is my/your eyes. Having lasers or no lasers you still need to use your eyes to get the work piece spot on near the cutoff point. Hope this helps!
Question:	Is there an LED cut line
Answer:	You can add the LED light to this saw. Not a laser but a shadow light that show exactly where the saw blade will cut. I just did it last night. Parts can be had for about $70. This basically turns it into a model 780 which is much more expensive. Pretty simple to add.

Product description

Remember when power tools were actually powerful? WEN’s 12-inch swing, variable speed drill press with laser centering device, is a powerhouse for your shop. Packed with features that you’ll find in larger more industrial type drill presses. This bench-top, cast iron drill press has the power to drill through metal, wood and other materials. Max drill capacity is 5/8” in 1” thick cast iron. The variable speed feature allows you to target in the exact speed (infinitely from 580-3200 RPM) that works for your project. While you are working you simply move a lever and adjust the speed as needed. No pulleys and belts to change! Our design uses a mechanical variable speed which allows for the same power and torque through the entire speed range. A digital readout powered by LED’s displays the running speed. Constructed with a rigid frame consisting of cast iron: head, table, and base, ensures accurate holes. Its powerful induction motor features ball bearings for an extended life and it all comes together with smooth and balanced performance even at high speeds. The 5/8” chuck with MT2 spindle taper gives you versatility with a variety of bits and features on-board chuck key storage, so you never have to hunt around for it. Worktable bevels 45° left and right for those tricky operations for the perfect right angles consistently. Base has predrilled holes for mounting onto a bench or work stand. Slotted table allows for mounting clamps and vises for effective mounting. The X-pattern laser locks-on to your drill points saving on guesswork and sparing expensive materials. A versatile and valuable tool for any shop especially when you expand its range of use with optional accessories such as mortising attachments, drum sanders, circle cutters, etc. Since 1951, WEN has proudly produced innovative powered tools focused on value delivering meaningful features that will help you complete and enjoy the work as much as the project. Remember when you could drill with laser precision? Remember WEN. DO NOT use power tools in the presence of flammable liquids or gases. Drill press Base -10 x 16 inches

• Infinitely variable speed ranges from 580-3200 RPMS. Mechanical variable speed delivers equal torque throughout the range. LED read out displays speed.
• Spindle Travel of 3-1/8" with easy to read, locking linear depth stop for accurate and repeatable drilling operations. Front to the back of the motor is 22 inches
• Quill diameter of 2.17 inches. Durable 2/3hp induction motor develops ample torque and power. Motor: 120 V, 60 Hz. Laser Module: Class III
• 9-1/2 x 9-1/2" cast iron worktable features rack & pinion height adjustment and bevels up to 45 Degree left & right. Width with the handles: 14-1/2"
• Includes drill press, mechanical variable speed, laser, table roller extension, 5/8" keyed chuck & key, tools for assembly.Drill press Height from the Floor to the top: 37 inch

User questions & answers

Question:	base size
Answer:	It is a lot like a car tire. Solid rubber
Question:	Does the drill press come pre-assembled? If not, how complicated is the assembly
Answer:	nope
Question:	it says 2/3HP how many amps does the motor say on its side 9 amps is 2/3HP what is on the side of the motor what watts or amps is the motor rated
Answer:	Definitely ok to use outside.
Question:	I see the spindle travel is 2" - 3 1/8" depending on model. What does the length in the name (8", 10" or 12") refer to
Answer:	Hello, Thank you for your question. The shelves are removable. Regards Ann

Product description

The DW088LR 12V MAX* Red Cross Line Laser Level features 12V MAX* Lithium-ion rechargeable power tool battery platform, self leveling cross lines, and a full-time pulse mode. Over-molded housing and IP65 of laser levels for construction are debris and water resistant.

• DEWALT laser level features 12V lithium-ion rechargeable power tool battery platform for extra long run time and the convenience of rechargeable power tool batteries
• Self-leveling cross lines laser level tool project bright crossing horizontal and vertical lines for various leveling and layout applications
• Integrated magnetic bracket with 1/4-inch and 5/8-inch thread rear mounted magnets of self leveling laser level allow flush attachment to metal and steel track
• Full-time pulse mode allows for use with detector, maintains full brightness for visibility, and extends range
• Overmolded housing and IP65 debris/water resistance
• Comes with an AA Starter pack and four batteries
• Locking pendulum helps prevent damage to internal components

User questions & answers

Question:	How long is the laser line it creates
Answer:	No experience with the red laser although I do believe the green beam would probably be brighter and thats why I paid extra for it. Its very bright indoors but outside was only visible to about 15-20 feet. The detector picked up the beam easily out to 75 feet, not sure how far away it will work as that took care of my need. Note: The red detector is not compatible with green laser. Have found it to be very helpful for a variety of jobs inside and out. Good Luck
Question:	Do you finance
Answer:	Mine did NOT come with a charger or a 12 volt battery. I got an empty holder for the 4 AA batteries. I trusted the answers others provided for your question and I'm extremely disappointed. Now I get to spend more money for a 12 volt battery AND a charger. Buyers beware!!!
Question:	Does anyone else have a problem with it shooting a dim line close to the bright one, and no its not a reflection i feel like it shouldnt with how $ it
Answer:	To be honest, I didn't try it. But the connection of the laser is to use a 12V battery.
Question:	Does dewalt dw0892 line laser detector work with this laser
Answer:	No, the DW089LR requires DEWALT 12V

Product features

12V MAX* GREEN CROSS LINE LASER

The DW088LG 12V MAX* Green Cross Line Laser features 12V MAX* Lithium-ion rechargeable battery, self leveling cross lines, and green beam laser technology, as well as over-molded housing and are IP65 debris and water resistant.

Product description

The Klein Tools Self-Levelling Cross-Line Laser Level is a high-performance laser levelling and alignment tool for professionals. This level provides a reliable, pendulum self-levelling system with clear, bright laser level lines and a 90° vertical plumb-spot feature. Equipped with an integrated magnetic mount and an additional ceiling clip mount, Klein’s cross-line level enables a multitude of alignment and layout applications. Self-leveling laser level with clear, easy-to-read laser lines. Level comes with integrated magnetic mount and ceiling clip mount. Includes a hard plastic carrying case for safe transport. Durable enough to withstand a 3.3-Foot drop. Low battery indicator and easily accessible battery compartment. Water and dust resistant (IP54). Hard plastic carrying case included. For more than 160 years, Klein Tools has manufactured premium-quality, professional-grade hand tools that deliver the performance, durability and precision needed to get the job done right. Our family of engineers, workers and craftsman continue to put six generations of expertise into every tool we create by using only the highest quality materials, superior workmanship, and keeping manufacturing as close to home as we can. Klein isn't just the name of our company, it's also our family name. And since we're an American company that's family-owned and family-run, you know you can count on us to be here tomorrow. Klein Tools doesn't just make great products, we make great products that stand up to the demands of the professionals who use them every day ... Since 1857.

• Laser Level with self-leveling, easy-to-read horizontal and vertical laser lines with plumb spot lasers to pinpoint overhead locations
• Level projects horizontal and vertical lines independently or together for various alignments
• Water and dust resistant (IP54), hard plastic carrying case included
• Integrated magnetic 360-degree mounting bracket with 1/4-Inch and 5/8-Inch tripod mounting threads
• Additional mounting clamp attachment for use on ceiling grid applications

User questions & answers

Question:	Cuanto pie dd alcanse tiene
Answer:	Yes. The bracket has a receptacle. The unit itself mounts inside the bracket.
Question:	How far will the laser shine
Answer:	The Bosch GLL 1P provides greater versatility in leveling and alignment applications with a combination bright line laser projection and point laser. Simple set up using quick leveling with a bubble vial. Together with the built-in vial level and strong magnet, the GLL 1P allows for quick and effortless horizontal and vertical leveling, while easily mounted in various angle applications. Product includes: (1) Mounting Plate, (1) Adhesive Mounting Strip, (2) Thumb Nail Mounts, (2) AAA Batteries
Question:	What about warranty
Answer:	Thank you for your question. The magnet of the GLL 1P Line and Point Laser is on the versatile mount. For further assistance, contact us at 1-877-BOSCH99 (1-877-267-2499) from Mon-Fri 7A-7P CST.
Question:	can i use this laser to paint diagonal lines on wall. does it have this setting
Answer:	I just checked it at over 40 feet. It's as clear and pinpoint as it is at 5 feet, no degradation of precision.
Question:	Can this be mounted on a tripod
Answer:	No, it has 4 points (left-right & up-down for plumbing) and cross line (vertical - horizontal)
Question:	Does it come with a mounting plate
Answer:	No, I just bought one hoping that it would. The vertical line is always there if you want a dot.
Question:	Does this have at least a magnetic mount? I want to use it for automotive graphics work
Answer:	Are you sure your unlocking it
Question:	How precise/small is the spot over distance? On my generic level, at 40 feet away, the "spot" is a useless, inch-wide blob
Answer:	A point laser is ideal for plumbing walls plate to plate.

Product features

Bosch GLL 1P Combination Point and Line Laser Level

The Bosch GLL 1P Line and Point Laser Level projects a bright laser line or a point – perfect for most users' basic alignment or leveling applications. The laser level allows the user to align and level without detaching the tool, and it features one-button operation for ease of use. It projects a laser line up to 16 feet. The versatile mounting accessory offers easy setup for many jobs.

Includes

GLL 1P combination point and line laser level, versatile mount, AAA batteries.

Accurate setup and leveling

The GLL 1P has two built-in bubble vials, which provides for more accurate leveling. It also allows the tool to be used as a spirit level. The leveling is quick and straightforward. The compact design of the aluminum base makes this tool handy for horizontal, vertical or angular applications – and it's easy to fit into a pocket.

Wall-mounting for functionality

The versatile mounting accessory mounts to walls. It includes a strong built-in magnetic base for various angle applications. It is also useful in that it can be mounted on a compact tripod with 1/4 inch-20 or can be placed on flat surfaces.

True and bright

The laser level produces a clear visible ideal for interior short range jobs. To align points across a room, it also provides a range point up to 65 feet. It delivers outstanding accuracy, up to ± 3/16 inch at 33 feet.

The Job Just Got Easier

With Bosch laser technology, users are able to be more productive and more profitable – with greater accuracy and precision on the job site. By offering an extensive range of line lasers, laser measures, rotary lasers, point lasers, digital levels, optical levels and measuring tool accessories, Bosch is able to provide solutions for a wide variety of applications. With Bosch measuring tools users are able to work smarter, not harder.

Cross Line Laser Level with Plumb Spot, Self-Leveling, Includes Magnetic Mounting Clamp

The Klein Tools Self-Leveling Cross-Line Laser Level is a high-performance laser leveling and alignment tool for professionals. This level provides a reliable pendulum self-leveling system with clear, bright laser level lines, and a 90-degree vertical plumb spot feature. Equipped with an integrated magnetic mount and an additional versatile ceiling clip mount, Klein’s cross-line level enables a multitude of alignment and layout applications.

Product description

DEWALT 12V 5 spot + cross line Green laser is a great tool for carpenters/remodelers, electricians and plumbers. This laser offers projected lines of vertical & horizontal cross, along with up, down, forward & side to side plumb dots - with accuracy of +/- 1/8" at 30 feet. It has a range of 100ft / 30M (dots), and 50ft / 15M (lines). run times are 14 Hrs / 8 Hrs for lines, 50+ Hrs for dots. This tool features an integrated magnetic bracket. It has 1/4" and 5/8" threads, with a locking pendulum, and a battery indicator so you can see the remaining run time. The IP65 over-molded housing gives you a better grip and offers added protection against damage. Common uses include leveling countertops and chair railings, etc., electrical outlet installation, and plumbing/piper installation. Includes: laser, TSTAK case, ceiling bracket, target card, enhancement glasses, magnet enhancement plate, 12V battery, 12V/20V charger. This is a Class 2 laser product, Power output ≤ 1mW. Pivoting Thread Mount: Yes.

• Vertical & horizontal cross, along with up, down, forward, & side to side plumb dots
• Accuracy of +/- 1/8" at 30 feet; 150 ft Range - Spot; 165 ft Range with Detector - Line
• Range of 100ft / 30M (dots), and 50ft / 15M (lines)
• 1/4" and 5/8" threads, locking pendulum, and battery indicator
• Includes 1) 12V Lithium Ion battery

User questions & answers

Question:	Is there a smaller case available
Answer:	Hi! The GLL40-20G is not magnetic. However, it comes with the MM 2 Flexible Mounting Device which attaches to multiple surfaces, with a range from 1/2 In. to 2-1/4 In. You may also use it with the BM1 positioning device. For further assistance, contact us at 1-877-BOSCH99 (1-877-267-2499) from Mon-Fri 7A-7P CST.
Question:	are the cross beams self leveling
Answer:	The laser projection and leveling starts at 6" so 2 feet will be fine using your GLL40-20G. For further assistance, contact us at 1-877-BOSCH99 (1-877-267-2499) from Mon-Fri 7A-7P CST.
Question:	how come the price of this laser increased so much
Answer:	Cross hairs
Question:	Does charger come with it
Answer:	Thank you for your question. The MM 2 Flexible Mounting Device that comes with the GLL40-20G attaches to multiple surfaces, with a range from 1/2 In. to 2-1/4 In. For further assistance, contact us at 1-877-BOSCH99 (1-877-267-2499) from Mon-Fri 7A-7P CST.

Product description

GRR-RIPPER 3D Push Block is a must-have for any table saw user. A true MICROJIG Innovation. Essential Protection It's essential for superior precision, control and safety on your table saw and other major woodworking machinery. Protect your hands like never before, virtually eliminate kickback with unmatched control, and guide and rip with surgical precision. Extreme Control The powerful green grr-rip gives you a commanding hold over the work piece for total control. GRR-RIPPER has three legs to give you three-directions of control on the keeper and off-cut work piece. It provides downward pressure to virtually eliminate kickback, inward pressure to keep the stock against the fence, and forward pressure to prevent burning. Unmatched Precision Stabilize your cut with the built-in Balance Support to square your cut and safely handle the smallest parts of wood when cutting on the table saw or router table. Rip as accurate as a 1/4" Standard without readjusting the fence. Fully Adjustable The adjustable Center Leg accommodates for a variety of different sizes and widths of material while the grip secures a virtually unlimited variety of woods, solid surfaces, aluminum or even plastic. GRR-RIPPER handle can be angled and adjusted for your comfort and control. Total Versatility GRR-RIPPER videos feature over 30 unique uses on the table saw, router table, jointer, and band saws. The powerful hold, extreme accuracy, and versatile adjustability will help you maximize your materials and greatly improve your protection against dangerous accidents. Trusted Everywhere Over 400, 000 GRR-RIPPERs sold worldwide. Join the smartest woodworkers worldwide. MICROJIG is a true innovator and founded by woodworker, Henry Wang, in his home garage. MICROJIG has now sold over 1 Million Products in over 20 Countries! GRR-RIPPER - Don’t Use a Table Saw Without It. Work Safer. Work Smarter. Made in the USA. 100% Satisfaction. Extended 3-Year . Watch the action video and add to your cart today! Using two GRR-RIPPERs allows you to feed long stock continuously without stopping, virtually eliminating burning and blade marks caused by inconsistent feed rate. Parts come off the saw ready to use with little to no additional sanding or planing.

• Protect hands and prevent kickback like never before
• Powerful high-friction durable grip for extreme hold
• Precision cutting and control down to 1/4" Ripping
• Fully adjustable for easy handling
• Work with small stock safely on the table saw, Router table, Jointer, & Band saw
• Made in USA. A true MICROJIG Innovation.
• Extended 3-Year . 100% Satisfaction .

User questions & answers

Question:	How hard is it to level the jig when adjusting the side support
Answer:	The bit is capable of being set to the depth of 1/4. I have never personally made a dovetail this small though because I used the jig only a few times and I only worked with soft woods. I believe if hardwoods were being used 1/4 would be adequate depth.
Question:	I looked at the videos. Am I correct in assuming that you have to remove the blade guard in order to use this
Answer:	I believe the bit is a 3/8 dovetail bit. I bought mine when I bought the jig. I would look up the jig on amazon and go to the "people who bought this item often buy..." I think that's how I got mine. Hope this helps.
Question:	What is the absolute minimum thickness the jig will cut? I need to rip 1/4" strips
Answer:	Yes, you can make box joints with the 4210.
Question:	What is the difference between the gr 100 and the gr 200by model and is it worth the price difference
Answer:	I believe it's a 1/2" shank but I'm not absolutely sure. It's in my shop up in CT and I'm in NYC at the moment, so I can't check it. I'll check this weekend and send confirmation. But your router should be able to handle 1/4", 3/8" and 1/2" shanks with different collets.

Product features

Three directions of force gives you superior precision, control and safety.

1. Downward Virtually eliminates kickback.

2. Inward Keeps stock firmly against the fence .

3. Forward Controls and feeds both sides of the stock for cleaner cuts.

Unbelievable gripping power with Green-GRIP.

Green-GRIP is the proprietary non-slip material that gives you superior gripping power over workpieces and materials such as oak, cherry, walnut, ebony, pine, poplar, maple, plastics and aluminum. Treaded grooves provide increased traction on the workpiece even with sawdust. Easily cleaned with denatured or rubbing alcohol. No other push block’s grip comes close.

Virtually eliminates kickback on table saws.

The GRR-RIPPER’s unique design provides downward force, controlling the keeper and off cut workpiece. This prevents the workpiece from lifting up off the table top – virtually eliminating kickback. Inward Pressure keeps the workpiece guiding along the fence preventing it from catching the rear-rising teeth. This gives you a smoother, cleaner, and safer cut. Work safer.

Versatility – table saws, bandsaws, router tables, jointers, and more.

Rip long stock on the table saw by using two GRR-RIPPERs with the hand-over-hand or leapfrog technique.

Versatility – table saws, bandsaws, router tables, jointers, and more.

Use the GRR-RIPPER in the vertical position to resaw or veneer cuts firmly against the fence to prevent bandsaw drift and ensure a straight cut from beginning to end.

Versatility – table saws, bandsaws, router tables, jointers, and more.

Control your workpiece when freehand routing on your router table.

Versatility – table saws, bandsaws, router tables, jointers, and more.

For proper and safe face jointing, you need technique, and reliable heavy-duty holding power. Strengthen your operation with our Green-GRIP non-slip material.

GR-100 includes the following

GRR-RIPPER GR-100: Handle, Main Body, 3 Legs with Green GRR-RIP, Balance Support, Hardware.