14 best promax router tables

Product description

Take control of your table-mounted router for quick, accurate, reliable, and repeatable setups



The Precision Router Lift helps you elevate your routing capabilities by providing precise control when making router setup changes or changing bits. The lift replaces the standard insert plate in a router table (the 3⁄8" x 91⁄4" x 113⁄4" plate fits all Kreg router tables plus many popular brands) and accepts any of 20+ popular router models—without the need adapters or modifications—in a high-performance carriage that you raise and lower from above the table.



With the Precision Router Lift, there’s no more reaching under the table to make adjustments or change bits, plus vastly improved control over all adjustments, large or small. Instead, simply use the lift’s included crank to adjust the height of your router bit easily and precisely from above the table. This makes adjustment fast, simple, and accurate so you can set up your router faster, and then dial in the exact bit height you require using the Precision Router Lift’s built-in micro-adjustment scale. The lift also simplifies changing bits by allowing you to do that from above the table, as well.



Precision is more than part of the name with this lift, too. The Precision Router Lift is designed so that every full revolution of the adjusting crank moves the carriage—and your bit—exactly 1⁄16", though adjustments down to thousandths of an inch are possible. A built-in micro-adjust scale can be zeroed out at any point to establish your baseline bit setup, so you can make exact bit height changes, and readjust to the exact same setting confidently every time for repeat cuts.



Whether you’re upgrading an existing router table, setting up a new one, or even building your own custom table, the Precision Router Lift is the perfect routing accessory. It offers the precision you demand to achieve exacting routing standards, along with the fast, easy performance you want in order to spend less time setting up and more time routing.

• Allows precise above-the-table setup changes for table-mounted routers
• Above-table collet access allows fast, easy, above-table bit changes
• 3⁄8" x 9 1⁄4" x 11 3⁄4" (9.5 mm x 235mm x 298mm) Hard-anodized aluminum plate won’t Sag, resists scratches
• Fits all Kreg Router tables and many competitive brands
• Bearing-guided carriage provides smooth operation

User questions & answers

Question:	Has anyone put a portamate router in kreg router lift? Pretty sure it's the same diameter as the porter cable
Answer:	Hello, If the diameter of that port-a-mate router is the same as the porter cable 7518 and there is no obstructions on that motor, you should not have a problem with it fitting. Thank You, Billy H Kreg Tech Support
Question:	How many inserts come with the lift
Answer:	Hello, There will be three Insert Rings that are included in your Lift. The Sizes are 1" , 1-3/16" and 2-5/8". Thank you, Billy H Kreg Tech Support
Question:	How far the the lift travel up and down
Answer:	The Kreg Precision Router Lift will have three inches of travel. This will allow bit changes above the table.
Question:	Does the kreg prs5000 lift fit to the bosch 1617evs router
Answer:	Yes, 1617 fits perfectly. Just make sure you follow the directions closely... meaning loosen the collar fully first, then insert the clamp bolts at position 5 on all four clamps, then slide the 1617 in, pull it 1/16” up from the stop, hold and tighten the collar with the lift wrench.

Product features

Precision Router Lift

Product description

The Bosch RA1141 Benchtop Router Table delivers ease of use plus stability, featuring an easy click router mount that attaches and detaches in seconds, with no leveling required. It has a smooth laminated MDF top, plus it has adjustable laminated MDF face plates for better support. The tall fence handles taller stock, and dual feather boards provide additional control while feeding stock across the table. There’s a bit-height gauge for easier bit setup and enhanced cut precision. With an easy-to-store folding design, this preassembled table has folding legs with storage compartments for convenience and portability. When routing curved work pieces, the starter pin and guard help support the work piece to allow easier control.

• Ultra-portable design – Features folding legs for fast setup and easy storage
• Easy click router mounting system – Provides easy bit changes and no leveling
• Laminated MDF top – Helps users make smooth and precise cuts
• Onboard storage – Ideal for holding router bits and spare parts
• No assembly required – Comes preassembled
• Tall fence with two adjustable feather boards – Helps to provide extra control and guide work
• Starter pin and guard – Allows easier control for routing curved work pieces
• Bistro-height gauge – Provides easier bit setup and enhanced cut precision

User questions & answers

Question:	Is the router included
Answer:	Router is not included
Question:	Its the same has a skil ras900, but with different color, any difference in quality ?i though bosh made stuff and not buy from seller and slap names
Answer:	I have the Skil 900 Router table along with the Skill Router. I had to purchase a new router ecosystem because my Skil Router would no longer hold it's depth settings. so I purchased the Bosch 1617 EVSPK Router Combo Kit and the Bosch Router Table RA1181with an additional Fixed base. When I was taking the Skil router table down I noticed a label on it which said Robert Bosch Company. My skil table quick release wasn't compatible with the Bosch Fixed base otherwise I probably would have used my Skil Router Table. I will say the Bosch Router table 1181 is much nicer. The MDF platform was ok except dust go in on the plastic edges and the edges separated from the table slightly. I'm a very light DIY type of person. If my Skil Router had a more robust/accurate depth guide I probably would still be using it.
Question:	I can see there is an on/off button on the table, do i have to stick with same electricity voltage of the router
Answer:	Yes, the router is designed to work with 120v, the router table has a on off switch which will need to be plug into a 110 outlet, when the router is inserted into the table , it is plugged into the outlet on the table, using voltage greater than 120v will burnout the brushes in your router.
Question:	The mounting plate is different as ra1181 or ra1171. i guess this item is for bosch only, right
Answer:	Hi! The Bosch RA1141 Portable Benchtop Router Table is compatible with the following routers: Bosch 1617-Series Routers (in fixed base only), Craftsman 17508, 17511, 17528, 17533, 17541, 17542, 26620, 26834, 28190, and 73277 Routers, DeWalt DW616 and DW618 Routers (in fixed base only), Hitachi M12VC Routers, Makita RF1100 and RF1101 Routers, Milwaukee 5615 and 5616 Routers, Porter-Cable 690-Series and 892-895-Series Routers (in fixed bases only) and 7529 Plunge Router, Ryobi R163K Router, and Skil 1810, 1815, 1820 and 1825 Routers. For further assistance, contact us at 1-877-BOSCH99 (1-877-267-2499) from Mon-Fri 7A-7P CST.

Product features

Bosch RA1141 Portable Jobsite Router Table

The Bosch RA1141 Portable Jobsite Router Table delivers ease of use plus stability, featuring an Easy Click router mount that attaches and detaches in seconds, with no leveling required. It has a smooth laminated MDF top, plus it has adjustable laminated MDF face plates for better support. The tall fence handles taller stock, and dual feather boards provide additional control while feeding stock across the table. There’s a bit-height gauge for easier bit setup and enhanced cut precision. With an easy-to-store folding design, this preassembled table has folding legs with storage compartments for convenience and portability. When routing curved workpieces, the starter pin and guard help support the workpiece to allow easier control.

Ultra Portable Design

With folding legs for fast set up and easy storage.

Easy Click

Router mounting system for fast and easy set up. Also allows for no leveling and easy bit adjustments.

Laminated MDF Top

For smooth and precise cuts.

Onboard Storage

Perfect for holding router bits and spare parts.

Product description

Kreg's freshly redesigned Precision Bench top Router Table (new item# PRS2100) now offers even more features that give it the capability of a full-size, industrial router table in a portable package. More than ever before, this makes the Precision Bench top Router Table a perfect routing solution, whether they want a router table to use on a job site or compact router table to use in the shop. You will notice the all-new router insert plate right away. It measures 9-1/4" x 11-3/4" x 3/8" to support even the biggest routers and it features Kreg's new Level-Loc Reducing Rings. These rings simply twist into place and lock in flush with the plate surface every time. Three Level-Loc rings are included: 1", 1-3/16" (for use with Porter-Cable style guide bushings) and 2-5/8". More Level-Loc ring sizes are available in a set of 5 (sold separately). The plate also has laser-engraved markings on the underside that make it easy to mount any router and it comes with a set of Kreg's Precision Insert Levelers. The redesigned Precision Bench top Router Table also features Kreg's upgraded industrial-quality fence. It features all-new cam clamps that allow you to adjust the fence quickly and easily and lock it in place securely. Like before, the fence is made from anodized aluminum, has adjustable sliding faces and works as a vertical jointer. To make routing even easier, the Precision Bench top Router Table has a large 16" x 24" table that's made from thick MDF to dampen vibration. The table offers the same durable Easy-Slide skin as Kreg's full-size router tables and has a miter gauge slot. That table is supported by a heavy-duty steel stand that has a wide stance for extra support, plus thick rubber feet to dampen vibration. The open design helps reduce router noise and the base has predrilled holes that allow it to be enclosed if desired.

• Industrial-quality fence containing adjustable faces, dust collection, vertical jointing and new cam clamps
• Full-size router insert plate with precision plate levelers and new Level-Loc reducing rings
• Extra-large 16" x 24" MDF table top with an Easy-Slide surface
• Wide stance heavy-duty steel stand for increased stability
• Includes: MDF top, full-size insert place with 3 Level-Loc rings, insert plate levelers, extruded aluminum fence and heavy-duty steel stand

User questions & answers

Question:	does this plate have pre drilled holes for skil 1820 or skil
Answer:	No.. the mounting plate is not pre-drilled for any specific router.. it does however have a centering template pre-printed on the mounting plate that makes laying out the specific Router holes quick, easy and accurate.. just follow the directions and make sure to use a backer board to prevent tear-out on the mounting plate when drilling the holes.
Question:	Does this take a standard miter gage in the slot from a Delta table saw, or an aftermarket coping sled
Answer:	It will certainly fit, the track seems to be slightly wider than the slot on my table saw. My expandable feather boards are slightly loose in the track of the router table.
Question:	Does the router mounting plate come pre-drilled for a certain designated router model or do you have to do the drilling? Template
Answer:	You drill your own mounting holes using the provided template
Question:	what is the exact size of the pre-drilled opening in the router table (without the inserts
Answer:	Level-Loc Insert Plate Dimensions:9-1/4" x 11-3/4" x 3/8"Insert Plate Material: PhenolicTable Surface Dimensions: 16" x 24"Fence Material: Aircraft Grade Anodized AluminumOverall Dimensions: 20" x 28-1/4" x 20-1/4"Overall Product Weight: 26 lbs.

Product features

Precision Benchtop Router Table

The Kreg Precision Benchtop Router Table offers features that give it the capability of a full-size, industrial router table in a portable package. Whether you want a router table to use on a job site or a compact router table to use in the shop, the Precision Benchtop Router Table is a perfect routing solution for you.

Rugged Table Top

The table top is made from an edge-banded, vibration- and noise-resistant MDF, and features an Easy-Slide Micro-Dot skin. The skin is constructed from a high-pressure laminate, which allows you to easily slide workpieces across the surface.

Precise Insert Plate

The Precision Router Table Insert Plate measures 3/8" x 9-1/4" x 11-3/4" to support even the biggest routers, and features Kreg Level-Loc Reducing Rings. These rings twist into place and lock in flush with the plate surface every time. Three Level-Loc rings are included: 1", 13/16" (for use with Porter-Cable style guide bushings), and 2-1/8".

Full-Featured Fence

The heavy-duty aluminum fence has quarter-turn locking levers for quick fence adjustment and confident locking, sized so they're easy to use but stay out of the way behind the fence. The fence also has independent sliding faces that provide increased workpiece support around the bit, and with the use of the included jointing rods, allow the table to be used as a vertical jointer.

Quiet Routing

By combining a noise-absorbing MDF table top with a rigid steel base and vibration-dampening rubber feet, our Precision Benchtop Router Table is incredibly quiet and actually tests quieter than most enclosed router tables.

Product description

The cabinet style functionality, expanded and precise material support and a dual outlet switch make this the perfect solution for woodworkers in search of a quality benchtop router table for the shop.

The Bosch RA1171 Cabinet-Style Router Table provides a premium work surface for woodworking and routing. Designed to fit a variety of routers and able to mount on any workbench, this router table is a versatile piece of equipment that will serve as an indispensable part of any woodworking shop. And with its cabinet-style construction, it offers better dust collection and noise reduction for a more efficient work environment.

Designed for Versatility and Precision

Thanks to its versatile design, the RA1171 lets you work with a variety of materials while ensuring precision with every cut. With a tall aluminum fence measuring 4-7/8 x 25-1/8 inches (HxL), the table handles tall stock with ease. The fence also features adjustable MDF face plates for better support and smoother operation.

The rigid aluminum router mounting plate stays flat and true for precise, accurate cuts, and for added versatility, it's pre-drilled to fit a variety of routers.

The easy-to-use featherboards attach to the fence and table and are fully adjustable to fit a variety of workpieces. They provide additional support and control while feeding stock across the routing table.

Dust Collection Ports and Accessory Slot

The RA1171's cabinet-style design excels at dust removal. It features two dust collection ports for removing dust and debris, and they both fit standard-sized 2-1/2 inch vacuum hoses.

Use the accessory slot to add additional featherboards, as well as 3/4-inch optional accessories, such as any miter gauge measuring 3/4 x 3/8 inches deep.

The RA1171 Cabinet-Style Router Table measures 25-1/2 x 14-1/2 x 15-7/8 inches (WxHxD) and weighs 42 pounds. It has a maximum fence opening of 3-3/16 inches and a maximum throat opening of 3-5/8 inches. It is backed by Bosch's one-year limited warranty, 30-day money back guarantee, and one-year service protection plan.

What's in the Box

RA1171 Cabinet-Style Benchtop Router Table, set of three mounting-plate insert rings, mounting hardware, two adjustable featherboards, adjustable clear guard, starter pin and guard, and two 1/16-inch thick outfeed fence shims.

From the Manufacturer

The cabinet-style functionality, expanded and precise material support and a dual outlet switch make this the perfect solution for woodworkers in search of a quality benchtop router table for the shop.

• Support: The tall aluminum fence measuring 4 7/8 inch x 25 1/8 inch can handle tall stock with ease; The fence is complete with adjustable MDF face plates for smoother operation with taller work pieces and out feed can be offset for jointing
• Precision: The Bosch RA1171 features a rigid aluminum router mounting plate that stays flat and precise for accuracy; For added versatility, it’s pre drilled to fit a variety of routers
• Easy to use: Two easy to use feather boards attach to fence and router table, providing additional guidance and protection against kickback; They’re fully adjustable to fit a variety of work pieces; Accessory slot accepts additional feather boards and 3/4 inch optional accessories such as miter gauge
• Clean up: With a cabinet style design, the RA1171 is able to feature two dust collection ports for removing any job site dust and debris; The dust collections ports fit standard 2 1/2 inch vacuum hoses
• Convenience: Featuring a dual outlet switch with 6 feet power cord; Includes bench top router table, aluminum router mounting plate, 3x mounting plate rings, mounting hardware, 2x adjustable feather boards, adjustable clear guard, starter pin and guard, and 2x out feed fence shims

User questions & answers

Question:	compatible with Skil router
Answer:	Thank you for your question. Yes, the RA1171 is compatible with Skil routers. If you have further questions please feel free to contact our Bosch Customer Service Representatives at 1-877-BOSCH-99 (1-877-267-2499).
Question:	How much does it weight
Answer:	It's built with particle board. Very similar to melamine. I couldn't tell you the precise weight, but I would judge it (sans router) to weigh about the same as a case of whiskey. Six 1.75 mL plastic bottles.
Question:	Will my ridged r24012 fit
Answer:	Thank you for your question. The Bosch RA1171 router table will work with several manufacturers routers. We have not tested with any Rigid routers, however if your model does not match up with any of the holes in the mounting plate you can mark off and drill the needed holes to match up with your router. Most plunge routers are not designed to be used in a router table. If you have further questions please feel free to contact our Bosch Customer Service Representatives at 1-877-BOSCH-99 (1-877-267-2499)
Question:	Is there an important difference between this table, and the Bosch RA
Answer:	The main difference is the cabinet which helps cut the dust down. The table top of this unit is laminated MDF which is not as durable as the metal top of the RA1181, however the plastic legs on the RA1181 are certainly not going to be as durable as the cabinet on this unit. I should also point out that while the table is made of MDF, the router plate is made of metal. Since that is where all the action is taking place, I fully expect this unit to last many many years. This unit has 2 dust ports, one behind the router bit and another in the cabinet itself. This really helps keep the dust down. the RA1181 will likely make a much bigger mess as all the stuff flies out of the bottom. The cabinet also serves as a handy place to store all the little goodies like feather boards, knobs, and whatnot. I have this unit and considered the RA1181 for a little while. I am 100% happy with the cabinet design and would certainly get it again. The only problem I have is that neither table comes with a miter guage. I added the POWERTEC 71005 guage to my table and it's awesome! It has a sturdy all-metal design and is a perfect fit for the miter slot in the table. Whichever table you get, I strongly suggest adding a miter guage

Product features

Bosch RA1171 Cabinet Style Router Table

The Bosch RA1171 Router Table features a cabinet-style design with a smooth laminated work surface for precision woodworking, making it an ideal benchtop solution for any workshop. The cabinet-style construction is ideal for stability, storage and dust collection. Its rigid aluminum router mounting plate is pre-drilled for compatibility with a variety of routers and for above table height adjustment with many common routers. The tall fence handles taller stock, and adjustable MDF faceplates and featherboards maximize precision and versatility. It also features a dust-collection port at the fence and one at the cabinet, for maximum dust management.

Cabinet Style Design

Ideal for stability, storage, and dust containment.

Aluminum Mounting Plate

Pre-drilled for compatibility with a variety of routers and for above table height adjustment with some routers.

Extra Tall Aluminum Fence

With adjustable MDF faceplates and featherboards to maximize precision and versatility.

Two Dedicated Dust Ports

One at the fence and one at the cabinet – for maximum dust reduction.

Product description

Compatible with major router brands, this Ryobi 32 in. x 16 in. router table includes 5 throat plates and has an integrated vacuum port to simplify woodworking projects. Whether smoothing edges for uniformity

• This refurbished product is tested and certified to look and work like new. The refurbishing process includes functionality testing, basic cleaning, inspection, and repackaging. The product ships with all relevant accessories, and may arrive in a generic box

User questions & answers

Question:	Will this table work with a lotos er001 plunge router
Answer:	Think it is compatible with all routers
Question:	will this work with bosch 1617EVS router
Answer:	Have no idea, my router is ryobi
Question:	can I mount a ryobi r163 fixed base router to the table so that the t wrench will operate on the router
Answer:	Not advisable! Cause your have to take into consideration of the weight the table ...
Question:	Is this compatible with Dewalt Router
Answer:	Yes it should be fine. I put an old craftsman on and works great

Product description

Limited Quantity Special DealsGet more out of your compact router with a rugged, adjustable Trim Router Table that goes anywhere! A Rockler Exclusive, pre-drilled holes on the back of the Trim Router Table let you attach a clamping strip for quick use on the edge of a bench, a table, a piece of plywood, or the tailgate on your truck. Perfect for small applications like routing round overs, chamfers, and small dadoes in your shop or at the job site. Sets up quickly yet its just as easy to detach your router from the table without tools. Use your router with the included 1/4 thick acrylic base to do freehand work like a standard router. The acrylic base not only provides a wide, level base for freehand work, its pre-drilled to fit most popular trim routers. Also includes an adjustable fence thats compatible with the Rockler Router Table Dust Port (21528, sold separately).Technical Details:Ideal for small applications like routing round overs, chamfers, and small dadoes in your shop or at a job site Clamps securely to a table, bench, even the tailgate of a truck (clamps sold separately) or build a mini router cabinet enclosure Sets up quickly yet its just as easy to detach your router from the table without tools and use it with the included 1/4 thick acrylic base as a standard router The 3/4 x 11-1/2 x 15-1/2 table is made of durable vinyl wrapped MDF Pre-drilled holes on the back side of the table allow you to attach an auxiliary clamping strip for securing to any work surface

• 3/4'' x 11-1/2'' x 15-1/2''
• Made of durable vinyl wrapped MDF

User questions & answers

Question:	Will this handle a big 3 1/4 hp hitachi m12v2 15 amp. i don't mind drilling holes i just want to know if it will handle this router
Answer:	Nope. It's made for a trim router. The plate will be too small for a standard router base.
Question:	Will the trim router table work with makita model # rt0701c
Answer:	Yes. This is the trim router that I use. The pre-cut hole patterns on the clear circular plexi do not align to the Makita router. I used my router as a template and carefully drilled and countersunk the necessary plexi mount holes. It does work, it just needs to be fitted to the Makita. Very happy with my setup.
Question:	Does this fit milwaukee 1 3/4 hp bodygrip router model
Answer:	This is for mini routers I don't think you'd want to use it with a 1 3/4 hp router.
Question:	Does it fit DW
Answer:	This table is made for a trim router, not a full-size. It fits just fine on my Dewalt trim router, but I don't think it will fit the full-size.

• 【Extra Large Extension Table to the Main Table】Besides the main table, this router table features extension tables at both ends. Each extension table comes with an extra-large size of 8" × 18" and an easy-slide surface, helping you complete routing projects better.
• 【Retractable Guard and Suits Most Router Bits】There is a transparent guard inserted into the fence with no binding to keep wood chips from flying around. This router table is designed for routers with up to a 6-inch (155mm) diameter base plate. Router bits with base plates within this size all works.
• 【Multifunctional Fence and Exact Miter Gauge】The fence is able to provide work piece support around the bit and with the combination of jointing fence to make the table be used as a vertical jointer. On the tabletop, it includes a precise miter gauge for aiding in straight and predictable cuts. It can be used to help measure angles.
• 【Selected Material and Rugged Durable Frame】Consists of aluminum alloy do of the main table and steel do of the extension table and structure, this router table is rugged durable. The aluminum table is rustproof and lighter for easy moving, and the wide stance heavy-duty steel stands increase the stability.
• 【Quick Installation and Easy Care and Cleaning】Coming with detailed instruction manual, you can easily complete the assembly by referring to it. The grooved surface keeps dust and chips away from work place, making cleaning easier. It’s easy to maintain this router in a dry and cool place.

User questions & answers

Question:	Will this fit my dewalt 2 1/4 dw618pkb router
Answer:	Yes
Question:	What size shank do you need? Can I use this to make a tongue and groove
Answer:	All this is is a table, you supply the router.
Question:	Is this work for dewalt 20 v Cordless
Answer:	I do not understand why so may people assume that I (amateur) is an 'expert' on every router ever manufactured (?!) ... but I would presume so??
Question:	does this work with dewalt 621 plunge router
Answer:	To the best of my knowledge, it does.

Product features

Choose our router table as a good partner for your work

Are you a woodworking amateur? Do you want to have your own router table? Our this router table converts routers into stationary power tools, making woodworking easier. It comes with ample working space and fits most router bits. It offers a precise miter gauge for aiding in straight and predictable cuts. This router working table is a versatile, affordable item for every wood worker.

Features

• Over 450 square inches of durable aluminum work surface
• With an adjust working table and the full extension can reach 8"
• Designed for routers with up to a 6 inch diameter base plate
• Transparent guard which can move freely with no binding that keeps wood chips from flying around
• A precise miter gauge for aiding in straight and predictable cuts
• Get CSA approvals

Adjustable Extension Table

Full extension can reach 7.8"

Tall Aluminum Main Fence and Jointing Fence

For better support and smoother operation

Dust Ports

For removing dust and debris

Dual Outlet Switch

Power switch 3-prong plug

Product description

Complete your woodworking or home improvement project with ease with the Bosch Under-Table Router Base. This base is compatible with Bosch 1617 and 1618 series routers. This under-table router base has convenient wrench access above the table, allowing you to easily adjust the router's depth. Threaded holes make it easy to mount the base to a router table with the Bosch 4-hole subbase pattern, as well as router tables with the common 3-hole subbase pattern. Hardware is included to make the setup process as smooth as possible. The Bosch Under-Table Router Base has a wide, 3.75-inch opening, allowing you to use larger bits. The motor housing does not rotate during depth adjustments, and 2 additional protective devices prevent the motor from falling when the quick-clamp is released. Whether you are a professional or a DIY homeowner, this under-table router is sure to be a great addition to your toolkit.

The RA1165 under-table base is based on the durable Bosch fixed base but enhanced with an above-table bit height adjustment mechanism. The RA1165 under-table base can be mounted to virtually any table surface and common router table plates.

• NEW AND IMPROVED: The Bosch RA1165 Under-Table Router Base is the new base for the 1617/1618 series routers, replacing the RA1164
• ADUSTABLE: The RA1165 conveniently allows depth adjustment of bit height from above the table. The router base is designed for use with 1617, 1617EVS, 1617EVSPK, 1618, 1618EVS routers
• MOUNTABLE: The RA1165 base has threaded holes positioned in Bosch’s 4-hole subbase pattern and common 3-holes subbase pattern for mounting
• CONVENIENT: The wide 3-3/4 base opening allows for the use of larger bits while the quick clamp system allows the motor to be moved with ease for tool-free base changes

User questions & answers

Question:	Does this work with this router http://www.amazon.com/gp/product/b0006a0de2/ref=ox_sc_act_title_2?ie=utf8&psc=1&smid=atvpdkikx0der
Answer:	Thank you for your question. Yes, the 16176 router motor will work with the RA1165 router base. If you have further questions please feel free to contact our Bosch Customer Service Representatives at 1-877-BOSCH-99 (1-877-267-2499).
Question:	Can I use it with the Kreg PRS 1040 router table and my Bosch 1617 router
Answer:	Thank you for your question. We recommend that you contact the manufacturer of the router table to verify if it is compatible with the Bosch 1617 series routers. If they are the same, yes the RA1165 will work with your table as it has the same hole pattern as the 1617EVS router. If you have further questions please feel free to contact our Bosch Customer Service Representatives at 1-877-BOSCH-99 (1-877-267-2499).
Question:	I would like a suggestion for a plate to mount this to please? I intend to make my own router table top and would like to attach this to a plate
Answer:	Mine is mounted to a custom 3/8 plexiglass plate With the handles removed, I was able to give my baseplate a small footprint (7x7). Plexiglass made it easy to see where I needed to drill for the hex lift opening.Someone suggested 1/4 plexiglass, which I think *might* flex slightly under the weight of this router. Several years ago I used 1/4 plexiglass on another router and got that result -- HOWEVER, it may be worth a shot. With the smaller 7x7 footprint, there may be no flex.
Question:	CanI use this RA 1165 Base with my Porter
Answer:	Nope. The mounting pattern is the same. The 10-24 screws are the same. The motor diameter is the same. However, there are three issues. 1) there is a pin in the base for which there is no slot in Porter Cable motor the motor won't slide past. 2) there are pins on the Porter Cable motor that do not slide past the 'bottom' opening of the base (they do slide in the 'top', so apparently the bottom is tapered and, even if you file pins or whatever... 3) the height adjustment mechanism on the base goes into one of 3 notches in the Bosch router motor. The Porter Cable motor does not have those notches and so the height adjustment purpose is lost

Product features

Router Undermount Base

The RA1165 under-table base is based on the durable Bosch fixed base but enhanced with an above-table bit height adjustment mechanism. The RA1165 under-table base can be mounted to virtually any table surface and common router table plates. It includes hardware for mounting to router table and an T-wrench for adjusting the depth from above the table.

• Base has threaded holes for mounting to router table positioned in Bosch 4-hole subbase pattern and common 3-hole subbase pattern. Hardware included

• Motor housing does not rotate during depth adjustment, — eliminating potential cause of horizontal movement of bit

• Heavy 12- & 16-gauge steel construction
• Adjustable in height from 29 to 35 Inches (736mm-889mm)
• 20 x 28 Inches (508mm-711mm) steel stand footprint
• Router Table Top
• A keyhole slot in the table accepts the quarter-turn fence lock, and allows the fence to be removed easily for freehand routing operations
• Table comes equipped with a combination miter-gauge/T-track to accept a miter gauge
• The fence adjusts easily with just one hand, and locks firmly in place with dual locks

User questions & answers

Question:	Can the insert plate on this bundle be specified so as to fit the bosch 1617 router? (predrilled for porter-cable & bosch
Answer:	100V-240V works with this screwdriver.
Question:	Are the table stop and unnecessary micro adjuster inclded in this kit as pictured but not described anywhere
Answer:	battery is not user servicable
Question:	what is the difference between the table fence kit($699) and table fence bundle
Answer:	7 Hours.
Question:	will this table fit the Bosch 1617evspk router
Answer:	They are metric sizes.

Product description

1 3/4 HP Bench-top router. Great router at a great price.

• Benchtop Router
• 1 3/5 Hp
• Great tool at a great price

User questions & answers

Question:	vac or 110vac
Answer:	It is only battery operated. You start with a fully charged battery and unplug the cord. You should not operate the tool while it is plugged in.
Question:	Are the guides removable so I can router larger sheets of material
Answer:	120V in---5V, 300ma out.
Question:	Can you use feather boards on the fence
Answer:	Yes you can stand on those materials while using this tool on minor tasks. For goodness sake, it's only 3.6v!
Question:	What size bit does it take
Answer:	It is in the package.

Product description

Specifations:



Miter gauge adjustment: 0-90

Product Length: 34in.

Product Width: 13-1/3in.

Product Height: 15in.

Table Material: main table: Al died cast, extension table : Steel.



Dust collection ready.



Designed for routers with up to a 6 inch diameter base plate.



A precise miter gauge for aiding in straight and predictable cuts.



Transparent guard which can move freely with no binding that keeps wood chips from flying around.

• Extra Large Extension Table: Besides the main table, this router table features extension tables at both ends. Each extension table comes with an extra-large size of 8" × 18" and an easy-slide surface.
• Retractable Guard: There is a transparent guard inserted into the fence with no binding to keep wood chips from flying around. This router table is designed for routers with up to a 6-inch (150mm) diameter base plate. Router bits with base plates within this size all works.
• Multifunctional Fence and Exact Miter Gauge: The fence is able to provide work piece support around the bit and with the combination of jointing fence to make the table be used as a vertical jointer. On the tabletop, it includes a precise miter gauge for aiding in straight and predictable cuts. It can be used to help measure angles.
• Material and Frame: Consists of aluminum alloy do of the main table and steel do of the extension table and structure, this router table is rugged durable. The aluminum table is rustproof and lighter for easy moving, and the wide stance heavy-duty steel stands increase the stability.

User questions & answers

Question:	Why is there no picture of the miter gauge
Answer:	it comes with one
Question:	Does this come with the feather boards shown in the picture
Answer:	yes
Question:	Many accessories are shown. What is actually in the box
Answer:	everything you see in picture is what you get with it
Question:	Does this come with router
Answer:	A router does not come with the router table

Product description

The Kreg’s Precision Benchtop Router Table offers more features that give it the capability of a full-size, industrial router table in a portable package. Whether you want a router table to use on a job site or a compact router table to use in the shop.

Precision Benchtop Router Table

The Precision Router Table Insert Plate measures 3/8" x 9 1/4" x 11 3/4" to support even the biggest routers, and it features Kreg’s new Level-Loc Reducing Rings. These rings twist into place and lock in flush with the plate surface every time. Three Level-Loc rings are included: 1", 1 3/16" (for use with Porter-Cable style guide bushings), and 2 1/8". More Level-Loc ring sizes are available in a set of 5 (sold separately). The plate also has laser-engraved markings on the underside that make it easy to mount any router, and it comes with a set of Kreg’s Precision Insert Levelers. 

Full-Featured Fence

The heavy-duty aluminum fence has been redesigned, too, with new quarter-turn locking levers. They allow quick fence adjustment and confident locking, plus are sized so they're easy to use but stay out of the way behind the fence. The fence also has independent sliding faces that provide increased workpiece support around the bit, and, with the use of the included jointing rods, allow the table to be used as a vertical jointer. A bit guard and a dust-collection port are also included.

Handy Power Switch

Add safety and convenience to your Kreg Precision Router Table with this handy power switch. This unique switch features a two-plug design to control two independent devices at once, Key-Lok to eliminate accidental power-on, and an 8-foot-long, heavy-duty, 14-gauge power cord a perfect companion.

Bundle includes:

• Kreg Precision Benchtop Router Table
• Kreg Multi-Purpose Router Table Switch

• BUNDLE INCLUDES: Kreg Precision Benchtop Router Table with Kreg Multi-Purpose Router Table Switch
• PRECISE INSERT PLATE: The Precision Router Table Insert Plate measures 3/8" x 9 1/4" x 11 3/4" to support even the biggest routers, and it features Kreg’s new Level-Loc Reducing Rings. These rings twist into place and lock in flush with the plate surface every time. Three Level-Loc rings are included: 1", 1 3/16" (for use with Porter-Cable style guide bushings), and 2 1/8"
• FULL-FEATURED FENCE: The heavy-duty aluminum fence has been redesigned, too, with new quarter-turn locking levers. They allow quick fence adjustment and confident locking, plus are sized so they're easy to use but stay out of the way behind the fence. The fence also has independent sliding faces that provide increased workpiece support around the bit, and, with the use of the included jointing rods, allow the table to be used as a vertical jointer
• HANDY POWER SWITCH: Add safety and convenience to your Kreg Precision Router Table with this handy power switch. This unique switch features a two-plug design to control two independent devices at once, Key-Lok to eliminate accidental power-on, and an 8-foot-long, heavy-duty, 14-gauge power cord – a perfect companion to the Kreg Precision Router Table and Kreg Precision Benchtop Router Table
• PRECISE BENCHTOP ROUTER TABLE: Kreg’s Precision Benchtop Router Table offers more features that give it the capability of a full-size, industrial router table in a portable package. Whether you want a router table to use on a job site or a compact router table to use in the shop, the Precision Benchtop Router Table is a perfect routing solution for you

User questions & answers

Question:	Can I use any router with this table
Answer:	Yes.. 1-2 Horse Power should fit. The mount is universal fit for the router.. Contact Kreg for dimensions.
Question:	Does the kreg prs2100 bench top router table with the accessories include a starter pin for curved cuts? is it easy to buy/install one if not
Answer:	It does include a starter pin. It is easily installed and removed. I am not sure if it is easily purchased. FWIW I did have to contact Kreg customer service for a part that was missing and they expedited the part to me. They were very responsive and knowledgable about the product.
Question:	Does this fit a DeWalt router
Answer:	Yes I installed a DeWalt router into mine. You drill your own holes into the mounting plate so pretty much any router will work.
Question:	Does this include everything pictured
Answer:	Hi Jacob. I don't know what is included with the Kreg router table. Amazon prime shipped it several days late. When I finally got it UPS had beat it to a pulp. Amazon said they couldn't replace it even though they had 14 still listed. Then I was told I had to pay for a return shipping slip because I didn't have a printer. Sorry, what you see may not be what you're going to get. Good luck.

User questions & answers

Question:	What is the diameter of the center hole? Can it fit a 2" wide bit
Answer:	No. The diameter of the hole is 1 1/2". I suppose the top plate could be modified to a 2" hole to accommodate the larger bit.
Question:	what is the shipping package weight
Answer:	This unit weighs approximately 15lbs.
Question:	Would this be ok with makita rt0701cx
Answer:	I'm not sure, but I used it to my Craftman router.
Question:	Is this a router table or a hinge boring machine? if it's a table, why does the product description begin with "1 horsepower benchtop hinge.. etc
Answer:	This is a router table...I use mine with a Bosch router ...works good👍

• Head sliding rails feature fully adjustable gab plates
• Quality product from the manufacturer

User questions & answers

Question:	What is the exact measurement of the insert plate
Answer:	The plane should have been delivered with all its parts. Send it back. If you really want to mess with it, any Stanley or Bailey pattern iron, chip breaker would probably work. If fact, those parts from an older wrecked plane would probably work better. The chip breaker and cap iron that come with this plane are exceptional poor. The cap tightens with a screw and not a lever. The chip breaker is not flat and is made plated brass instead of steel. When you buy plane and actually get all its parts, is only worth about what you paid for and nothing more. I rate the plane service to poor and it needs constant sharpening and adjustment.
Question:	What are the dimensions of the table top
Answer:	I believe that the shape of number 4 plane irons is pretty much the same between makers. You get them on Amazon, e-Bay, etc. The differences will be the quality of the steel and not the shape of the iron. U-Tube a number videos from people like Paul Sellers who tell you all about the use, adjustment, care, and maintenance of planes.
Question:	is the insert inclued
Answer:	The blade holds an edge pretty well but does need periodic tune-up. My biggest problem is the chip breaker is not flat and the breaker metal is made of soft material. Probably plated brass.
Question:	Does this table fit a Bosh 1617ev router
Answer:	Try pliers.

Product features

Router Table with Adjustable Fence and Stand

This is an absolutely amazing deal brought to you by the President of Grizzly. Just add your router and you have a large size platform for your woodworking projects. Table size is 31-7/8" wide x 24" deep.

Features a sturdy A-frame, steel stand, large adjustable fence with T-slots, a universal router mounting plate and a 2-1/2" dust port. Table thickness is 1-3/8". Overall height is 34-5/8".

Adjustable Split Fence can be Shimmed for Jointing

2-1/2" Dust Port

Universal Router Mounting Plate Measures 12" x 9" & Includes 2 Removable Inserts & Starting Pin for Freehand Routing

Sturdy A-Frame Stand

Specifications:

· Table Size (Length/Width): 31-1 ⁄2" x 24"

· Maximum Table Opening Size: 3-7 ⁄8"

· Number of Table Inserts: 2

· Table Insert Inside Openings: 11 ⁄4", 25 ⁄8"

· Fence Board Size (x 2): 18" x 6"

· Number of T-Slots Per Fence Board: 1

· Number of Table T-Slots: 1

· T-Slot Size: 3 ⁄4" x 3 ⁄8"

· Dust Port Size: 2-1 ⁄2"

Features

• Top features a stable MDF core with durable melamine laminate & polyethylene edges
• Universal router mounting plate measures 12" x 9" & includes 2 removable inserts & starting pin for freehand routing
• Split fence has a MDF core & a 33" long anodized aluminum mounting bracket that is precision machined
• T-slots in fence for mounting featherboards & jigs
• Measuring tape on fence reads both right & left.