14 best mill drill machine

Product description

Milling and drilling machine product grouping mill/drill machines, mill/drill machine, swing 15-7/8 In., drilling capacity steel 1-1/4 in., end milling capacity 3/4 in., face milling capacity 3 in., motor HP 2, 120/240, table work surface 9-1/2 x 32-1/4 in., includes angle vise, longitudinal travel 20-1/2 in., cross travel 6-1/2 in., 26. 0/13.0 Amps, motor type TEFC - UL listed, 1 phase, 60 Hz, 150 to 3000 RPM, chuck size 1/2 in., spindle R8, spindle taper R8, spindle speed 150 to 3000 rpm.

With its generously sized worktable and hinged belt cover for faster speed changing, the Jet JMD-18 Mill Drill Machine is efficient and precise, whether you're working with aluminum, wood, or even ceramic tile. Powered by a UL-listed motor, this high-performance tool has a drilling capacity of 1-1/4 inch and a 15-7/8-inch swing. It also boasts a three-inch face mill capacity, a 3/4-inch end mill capacity, and a host of innovative features, like an easy-to-read internal depth gauge and a worklamp.

Extra-Large Work Table for Bigger Jobs

Thanks to its extra large, 9.5 x 31.75-inch worktable, the JMD-18 gives you the freedom to tackle larger scale projects that require more space and flexibility. And the included worklamp provides ample illumination of any size work piece, even in dim conditions.

2 HP Motor and Hinged Belt Cover for Power and Fast Results

The JMD-18 operates with a powerful UL-listed, 2 HP, one phase, 230-volt motor that gives the tool a range of 12 spindle speeds from 15 to 3,000 RPM. And to minimize delays and wait periods as you transition to different speeds, this motor is also supported by a hinged belt cover that offers faster speed changing.

Cast Iron Column and Heavy-Duty Roller Bearings for Support and Stability

The JMD-18 has a strong, supportive design. First, a one-piece cast iron column offers additional support where you need it, giving you the freedom to handle heavier material without worry. And heavy-duty, tapered roller bearings support the spindle for greater tolerance and more accurate drilling depth.

Easy-Read Depth Gauge and 360-Degree Swiveling Head for Precision

Easy to operate, the JMD-18 offers user-friendly features, like satin finished easy-read dials, to guide you through every step of your project. A positive quick-stop knob combines with an easy-to-read internal depth gauge for consistency, while a 360-degree swiveling head gives you the flexibility you need for precise results.

The JMD-18 is backed by a two year warranty.

About JET: A History of Sharing New, Feature-Rich Products

Opened in 1958 after the founder of the company, Leslie P. Sussman, took the first Boeing Jet Airplane trip from Seattle, Washington to Japan, JET began as a small dealer that sold air hoists and trolleys out of a single hardware store in Seattle. Over the years, JET has carried everything from snowmobiles, transmitter radios, and forklifts to nylon stockings, but by the early 1970s, metalworking had become the base of their business line. And by the 1980s, JET had expanded into the realm of woodworking. Today, you'll find that JET offers a wide range of popular woodworking tools that are backed with best-in-class features and excellent service.

What's in the Box

JMD-18 Mill Drill Machine, one worklamp, adjustable carbide facemill, drill press angle vise, 1/2-inch drill chuck, chuck arbor, and draw bar.

• Hinged belt cover allows faster speed changing
• 9 1/2 by 31 3/4 inch worktable
• 2 hp, 1 phase, 230 volt only motor
• Heavy duty tapered roller bearings’ support the spindle
• Stand not included

User questions & answers

Question:	How difficult is it to put a digital readout on this machine
Answer:	My guess is that they are metal. I've done a lot of drilling myself and haven't had a problem yet. I've had mine for 9 years now. If you buy one check the wiring, though. We bought one for work in 2012 and the wiring was all messed up. Our electrician had to fix it.
Question:	Are the gears for the drilling head plastic or metal? Looking to do alot of drilling in hard material
Answer:	The JMD-18 uses r-8 collets and comes with a r-8 tapered adapter for a standard Morris 1/2”chuck which is also included. If you’re going to mill this is the way to go but if not I’d just get a drill press.
Question:	Would you pick this machine over a machine (with a 1/2 inch chuck) over one which has the more typical/commercial tapered R8 arbor (larger machines
Answer:	I don't think so. Not sure what you mean by "square ". The head swivels left or right and goes up and down. Hope this helps.
Question:	Can this machine be "Trammed" in , meaning the spindle being square and plum with the table or is their no adjustment to do this on the machine
Answer:	Inch inch and a half

• The table is suitable for Mini Drill and drill bracket series. It can also apply to other suitable machine.
• The work table is composed of several adjustable dovetail slotaluminum alloy composition, can guarantee the minimumspace and ensure the accuracy
• The working table comes with three T shaped groove, standard size is 15x8x6mm.
• X axis travel : 200mm,Y axis travel : 50mm, Distance between grooves : 34mm
• Working table size : 310mmx90mm, Height : 80mm (including two working clamp)

User questions & answers

Question:	Is this good enough to mill a polymer 80 percent lower
Answer:	Absolutely! I used carbide cutters and got really great results.
Question:	Will this fit on a Proxxon MF
Answer:	My lathe did not come with tools or gears, the basic metric tool will work the key for spindle head, you can use an old socket tool and grind to fit
Question:	Does this read in inches
Answer:	yes,this mini power motor lathe tool kit can process metals,turning tool is high - speed steel material, can process soft, non - ferrous, precious metals,ect
Question:	Will this fit on a dremel
Answer:	You can search the CNC parts that you want to buy in our shop Jectse us, or send a picture of the product to us by email, we will help you to find this product.

Product features

Miniature precision multifunction Milling Machine Bench drill Vise Fixture worktable X Y-axis adjustment Coordinate table

Type : BG6300 working table

T solt : have three t solts

Solt size: 15mmx8mmx6mm

Mounting hole distance : two holes 93mm away from the nearest is the middle is 98mm,the distance is 112mm

Zero adjustment handwheel rotates a circle : 1.25mm.one lattice equal is 0.05mm

Apple to : Mini drill and drill bracket series and other suitable machine

Product description

Description detail:

Material: Aluminium

Alloy Size: 310 * 90mm * 80mm

X-Route: 200mm

Y-Route: 50mm

Distance of grooves: 34mm

T-slot size: standard size slot is 15 X 8 X 6mm

cale travel: 1.25mm (circle), 0.05mm (one cell)



Package includes:

1 x milling machine

• The table is suitable for Mini Drill and drill bracket series. It can also apply to other suitable machine.
• The working table comes with three T shaped groove, standard size is 15 x 8 x 6mm.
• Zero adjustment handwheel rotates a circle of 1.25mm. A lattice is equal to 0.05mm.
• The X axis Y axis distance is 200mm, the stroke is 50mm.Alloy Size: 310 x 90mm x 80mm
• The work table is composed of several adjustable dovetail slotaluminum alloy composition, can guarantee the minimumspace and ensure the accuracy.

User questions & answers

Question:	Would this work for milling an AR15 lower receiver
Answer:	good items. nicely work!
Question:	What are the two included 1" x 5" white synthetic fiber strips for? Some kind of surface shims perhaps
Answer:	yes, this cookie cutters is easy to clean.These fruit and vegetable cutters are dishwasher safe.You can take the green handle down then put those in the dishwasher, which can be better clean.And also you can chose soaked them for a few minutes in hot, soapy water, then rinsed them under tap.But,It is recommended to dry after use and pay attention to drying. It can prevent rusting and prolong service life. Sorry we not answer your question on time, cause we didn't get the remind of this question, so toook a long time to answer you,sorry.Still very glad to answer your question, hope this can help you,have a great day.
Question:	Would this work with my wen 4208 8 in. drill press? https://smile.amazon.com/wen-4208-5-speed-drill-press/dp/b00hqonfve/ref=sr_1_3?s=hi&ie=utf8&qid
Answer:	Stainless steel would be safe in an air fryer. No different than a cookie sheet. Good luck getting them to send the correct item. They sent me something completely different.
Question:	what is the size of the mounting base
Answer:	If the pan is a non stick I would not recommend it. They have shape edges for cutting as any cookie cutter would they are metal and sturdy so you may scratch your pan. They are lovely for making fun cookies and sandwiches as well as play dough shapes racing around for crafts paper or cloth let your imagination run wild you could do so much with them!!!

Product description

This M1111 Milling Machine has all of the important features of the M1110, but with a few extra time-saving luxuries. However, this mill is further fortified with a quick-tilt headstock for horizontal milling, 1 HP brushless motor, a multi-function digital depth scale on the quill, push-button speed control and digital spindle tachometer. The quick reversing tapping feature also makes hole threading simple. Just put the machine in tapping mode, start the tap, and when the thread is completed, push the button at the end of the rack levers and the spindle reverses, immediately withdrawing the tap from the hole. The back-lit digital tachometer tells you the precise spindle speed for matching tooling and material. All of these extra features make the M1111 Milling Machine one of the most sought after machines available! Made in an ISO 9001 factory.

• 1HP, 220v, Brushless DC Motor w/ Step-Up Transformer, 110v Operation
• Push button motor control for forward, reverse, tapping and off
• Variable Speed: 100 - 1750 RPM
• R-8 Spindle Taper
• Over 14" Headstock Movement

User questions & answers

Question:	I'm not trying to nit-pick: one pic has z (vertical) dial or crank on the left-the other one has it on the right. Which is it
Answer:	55 mm
Question:	does the spindle have power feed
Answer:	Yes it should, inside diameter of the clamp is 55mm
Question:	Can I plug it into an standard 110 Volts outlet
Answer:	Hello Betty the hole size is 2 and 7/8 We had to put them on for insurance reasons."only when the inspector shows up" Take care .Jim
Question:	how well can it mill steel? is it too light duty to be useful for mild steel
Answer:	This drill press uses a 60 watt bulb. The light socket included is for 110 volt use only. If the socket is used while operating at 220 volt the light bulb will explode, potentially causing serious personal injury.

Product features

Shop Fox M1111 Deluxe Milling Machine

This M1111 Milling Machine has all of the important features of the M1110, but with a few extra time-saving luxuries. However, this mill is further fortified with a quick-tilt headstock for horizontal milling, 1 HP brushless motor, a multi-function digital depth scale on the quill, push-button speed control and digital spindle tachometer. The back-lit digital tachometer tells you the precise spindle speed for matching tooling and material. All of these extra features make the M1111 Milling Machine one of the most sought after machines available.

Surface Ground Cast-Iron Table

This machine has a precision-ground cast iron milling table that can travel 5-3/4 by 15-1/2 inches, along with a hand wheel and fully geared lift system that can raise and lower the headstock up to 14-3/4 inches. In addition, the headstock can tilt up to 90 degrees for horizontal milling.

Longitudinal Feed

The longitudinal feed, or X-axis is moved by the handwheel at the end of the table. The handwheel easily moves the table in both directions side-to-side. One complete revolution of the handwheel moves the longitudinal feed 0.100 inch for precision adjustments. The scale included on the front of the table is for use when a tight tolerance is not required. The longitudinal feed can be locked in position by a table lock located on the front of the table.

Cross Feed

The cross feed or Y-axis is moved with the handwheel located on the front of the table base and operates in the same fashion as the longitudinal feed for precise front-to-back adjustments.

Digital Readout and Control Panel

The M1111 features a front-mounted emergency stop button, a see-through chip guard with a safety switch, and a quick-reversing tapping function which allows you to create threaded holes.

Tapping Mode

The quick reversing tapping feature also makes hole threading simple. Just put the machine in 'tapping mode', start the tap, and when the thread is completed, push the button at the end of the rack levers and the spindle reverses, immediately withdrawing the tap from the hole.

Brushless Motor and Variable Speeds

The Shop Fox M1111 mill contains a 1-horsepower, brushless DC motor and a push-button speed control that deliver variable speeds between 100 and 1,750 revolutions per minute (RPM). A back-lit digital spindle tachometer tells you the tool's precise spindle speed so that you can set it to just the right speed for your project.

• ★Mini multifunctional working table 6300.The table is suitable for mini drill and drill bracket series. It can also be applied to other suitable machines.
• ★The work table is composed of several adjustable dovetail slot aluminum alloy composition, can guarantee the minimum space and ensure the accuracy.
• ★Table size: 310 × 90mm.Height : 80mm(including two working clamp),standard size is 15x8x6mm.
• ★Adjustment in X direction: 200mm. Adjustment in Y direction: 50 mm. Distance between grooves : 34mm
• ★Hand wheel with adjustable scale:A ring=1.25mm,A scale=0.05mm.

User questions & answers

Question:	what is the height of the 6330 model
Answer:	I originally ordered a 6” vise for a similar mill and found it to be way to big for the unit. Replaced with a 3” vise which turned out to be perfect.
Question:	If i wanted to buy a set of hold down clamps what size t slot would i need
Answer:	Everything on my 3" is less than 0.001" deviation.
Question:	Can the hold down clamps and hardware be purchased separately? I’d like a 2nd set
Answer:	The base of the 3” milling vise is 9 1/2” by 4 1/4 “ without the handle
Question:	Do the dials only read metric
Answer:	Its standard uses all the jaws I throw at it

Product description

Milling Machine Bench drill Vise Fixture worktable X Y-axis adjustment Coordinate table Feature: Type : 6300 working table T solt : have three t solts Solt size: 15mmx8mmx6mm

User questions & answers

Question:	What is the dimension from the bottom of the base to the top of the table
Answer:	I weighed mine on a cheap bathroom scale - 55 pounds.
Question:	Is the green base aluminum or plastic
Answer:	9 inches, just went and measured mine
Question:	Is the 2 1/2” vice named and pictured included with this purchase
Answer:	Just measured the slot is 0.45” wide.
Question:	Where can I get a set of clamp jaws to fit this table
Answer:	I had the 4” version, meaning 4” wide jaws that open 4” or more. I sent mine back because the base was HUGE. No way to bolt it to the bed of my small mill.

Product description

Features:



For 8mm air pipe

For CNC Lathe Milling Drill Machine.

Cooling stone / metal / ceramic tile engraving machine.

Product Size:

50 x 30 x 20mm / 2 x 1.2 x 0.8inch

Hose about 1.5m

Package Weight: 6.6oz



how to use:



Step 1: Insert the inlet tube

Step 2: Insert the intake pipe

Step 3: Put the filter head into the container

Step 4: Turn on the air source and adjust the flow of intake air and liquid through two throttle valves.





Package Weight : 6.35 Ounces

Package Dimensions (L*W*H) : 7.48*5.51*1.18 Inches

Package Include:



1 x Mist Coolant Spray System

• √ Great Value - Processing the coolant can save more than 80%, the cooling effect is no less than the conventional water-cooled.
• √ Working Safer - Gas processing chips are blown away, working safer; A lot of water problem solving tools, easier to clean up.
• √ Save Time - Not only increases the machining cutting speed, save time and reduce processing costs and tool wear.
• √ Easy To Use - Air flow and spray mist volume adjustable design, easier to use.
• √ Widely Used - In the liquid without pressure output required to ensure that the air pressure in the range 5-7KGF / CM2.

User questions & answers

Question:	Can this act as a mini flood system? On milling machine? On mini lathe? On horizontal bandsaw
Answer:	I used 5/16 OD poly tubing and it fit perfectly in the air connector.
Question:	how are you attaching an air line to the 8mm line? What coupler/connector
Answer:	I epoxied neodymium magnets you mine.
Question:	What are the mounting hole sizes
Answer:	It has two ports. One of them accepts the clear plastic hose that you see in the photo. This hose is inserted into the fluid lubricant of your choice. The other port hooks up to a hose coming from an air source such as an air compressor. When the air from the compressed source is forced through the unit, it syphons the fluid through the unit much like how a Venturi Vacuum System works. The amount of air or lubricant can be adjusted to fine tune the mist/flood coming from the tip of the flexible nozzle.
Question:	how do you hook this up
Answer:	the tool bi the 3/8"tool bit set came with carbide inserts.

User questions & answers

Question:	Is there a metric set available
Answer:	That's exactly what I used this set for my 80% arms lower receiver. Completed it last week with a Deltron upper and tested it at the range yesterday. Take your time and go slow and it will produce a quality part. Predrill holes with a drill bit. I did the whole process using these to finish with.
Question:	will this set be able to drill my AR15 lower receiver
Answer:	Two or three flute center cutting end mill most 4 flute are not center cutting and will go a horrible job. Two flute end mills in very sharp condition best done on a larger heavy duty drill press 12 inches or more swing. The Quill arbor and bearings need to be tight with minimal slop. Drill press needs to be capable of low speed to avoid chatter. If things are optimal it "may work" any vertical mill even a mini mill will do a better job for this milling operation.
Question:	In drill press, how will they do for plunge cutting? I was under impression I need center cut end mill for boring metal, am I wrong
Answer:	I have been using the 1/4 and 3/8 bits for mortising in cherry wood, they are excellent at that - clean cut, not much vibration, stay sharp longer than other he's spiral bits.
Question:	Are these suited for wood as well
Answer:	End mills don't really have a cutting depth. The general rule is to never plunge more than 1/2 the diameter of the mill. That said this is a nice starter set of end mills. Great for brass and aluminum. Go slow with steel. Use plenty of lube.

Product features

Dimensions

Widely Application

• 4 flutes end mill can be used on many fields, such as metal,wood ,aluminum processing, CNC machining and engineering using, ideal for peripheral and finish milling.
• Suitable for lathes, milling machines, bench drills.drill press and etc.

Product description

The table is suitable for Mini Drill and drill bracket series.

It can also apply to other suitable machine.

The work table is composed of several adjustable dovetail slotaluminum alloy composition,

can guarantee the minimum space and ensure the accuracy.

The working table comes with 3 # Hexagonal wrench * 1,

exquisite equipment * 1, M8 * 30

Zero adjustment handwheel rotates a circle of 1.50 mm. A lattice is equal to 0.05mm.

Adjustable for X direction:190mm,

Adjustment for Y direction:67mm



Package includes:

1 Pc of Milling Table of Medium Version.

• The table is suitable for Mini Drill and drill bracket series. It can also apply to other suitable machine.
• The work table is composed of several adjustable dovetail slotaluminum alloy composition, can guarantee the minimum space and ensure the accuracy.
• The working table comes with 3 # Hexagonal wrench * 1, exquisite equipment * 1, M8 * 30
• Zero adjustment handwheel rotates a circle of 1.50 mm. A lattice is equal to 0.05mm.
• Adjustable for X direction:190mm, Adjustment for Y direction:67mm

User questions & answers

Question:	What are the dimensions of the slots
Answer:	The heart is about an inch. I used them to cut cheese for a charcuterie board.
Question:	Will this be ok to hold something about 6kg
Answer:	Yes but they are small. They are about the diameter of a cucumber.

Product description

JET CS-18 Floor Stand For Mill/Drills (350045)

From the Manufacturer

Optional stand with enclosed shelf for JET JMD-18 Milling/Drilling machine. 31-1/4 by 23-1/4 by 28-Inch.

• HEAVY-DUTY MILL/DRILL STAND
• COMPATIBLE WITH JET 350017, 350018, AND 350020
• 31-1/4" X 23-1/4" X 28"

User questions & answers

Question:	What is the mounting hole pattern for mounting the mill/drill
Answer:	Four bolts. One in each corner.
Question:	what is the dimensions of the base- i need that so i can buy a wheeled platform to sit it on. OR can you put locking castors on it
Answer:	I bought the JET casters for the base cabinet
Question:	What is the top surface lxw and height? what is the load bearing capacity? want to use it for a 1000 lb. mill.thanks for taking the time to answer
Answer:	I don't know what the stated weight bearing capacity is, but my mill is around 400 lbs and it seems to handle it well. I don't think this would be sturdy enough for 1000 lbs.
Question:	Is the height only 9 inches as stated
Answer:	Stand without casters is ABOUT 28-inches tall x 31-inches deep x 23-inches wide; ships disassembled in a box that is about 9-inches thick & about 72-pounds

User questions & answers

Question:	Are these center cutting
Answer:	They work well on steel should be fine on stainless.
Question:	How do these work or Stainless...anyone
Answer:	Try Mc Mzster Carr.
Question:	looking for quantity of 100. 8mm x 8mm x 19mm x 63mm end mill bit for aluminum
Answer:	To be honest I'm not sure. Chinese bits made of who knows what steel. You'd have to get a hardness test and have extensive knowledge of cutting angle vs cutting material to have an accurate guess.
Question:	Where do I find information on the feed rate and speeds for these end mills
Answer:	yes

Product description

Description:

Engraving machine spray cooling,Special design,direction of rotation,easy to operate.Standard fixing device,fine spray port, long life.

Specification:

Material:plastic&metal&brass

Size:36cm(L),hose about 1M.

Fit for 8mm air pipe

Cooling stone/metal/ceramic tile engraving machine.

For CNC Lathe Milling Drill Machine.

Features:

1) a lot of water problem solving tools, easier to clean up.

2) processing the coolant can save more than 80%, the cooling effect is no less than the conventional water-cooled.

3) gas processing chips are blown away, working safer.

4) the nebulizer gas and coolant is adjustable, easy to use on different processing conditions.

5) Even the super-hard alloy precision machining the workpiece can achieve a smooth surface

6) not only increases the machining cutting speed, save time and reduce processing costs and tool wear.

NOTES:

1. Clean the liquid shall be used.

2. Do not use liquid-corrosive.

3. In the liquid without pressure output required to ensure that the air pressure in the range 5-7KGF / CM2

(atomization and gas, associated gas pressure).

4. Use the liquid viscosity at 68cSt or less.

Package include:

1x Mist Coolant System

• ✿ Flexible functions as cooling, lubrication and blowing the metal chips can be performed at the same time.
• ✿ Designed and manufactured for improving machine ability, cutting speed, and extending tool service life, Saving working time and production cost.
• ✿ The nebulizer gas and coolant is adjustable, easy to use on different processing conditions.
• ✿ Even the super-hard alloy precision machining the workpiece can achieve a smooth surface.
• ✿ We strive to provide you with high quality and convenient service. You are welcome to contact us if you have any problem about our product, we will give you a satisfactory reply.

Product description

Top Quality M2 HSS



Drill accurate center holes in material prior to turning, or use as a starter bit for accurate holes in stock. Sizes 1, 2, 3, 4 and 5, 60° tip angles.

• Top Quality M2 HSS
• Drill accurate center holes in material prior to turning, or use as a starter bit for accurate holes
• Sizes 1, 2, 3, 4 and 5, 60° tip angles.

User questions & answers

Question:	do the numbers on the bits correspond to numbered drill sizes
Answer:	Nope. They are numbered #1-#5 No imperial or metric sizing is indicated
Question:	Are these made to fit in standard R8 collets
Answer:	I would use them in a drill chuck to save time , as long as they run true a collet is not needed. They are designed to put a starting point for a drill bit.
Question:	Are these good for drilling steel and iron metals or would they not hold up
Answer:	Yes. They are good for drilling metal. My are holding up well.
Question:	Where is this product made
Answer:	Nothing about where they are made on the label, and only "HSS #1 -#5 on the tools themselves. But they work great in my lathe or drill press.

Product description

Heavy duty design. Special quenching treated key parts increases durability. Suitable for drill presses or lathes spindle accepts R8 shank Jaws are specially engineered to achieve balance. JT33 mounted. Chuck key and R8-JT33 arbor are also included in the package. Please note, we have pre-installed the arbor to the drill chuck and lubricated together againsting rusty. For first time use, please uninstall the arbor and drill chuck and clean the lubricate to prevent the possible slippery.

• Clamping Range: 1/32" - 5/8".
• Chuck Overall Length: 93mm
• Shank Diameter: 57mm
• Accuracy: 0.005"
• JT33 Mounted

User questions & answers

Question:	is the arbor threaded into the chuck are press fit
Answer:	1. Clean tspered bore in chuck with acetone.2. Do same to mating arbor taper.3.Apply a few drops of high-strength Loctite4.Rotate arbor while inserting arbor into tapered Bore of chuck to spread thin film of Loctite.5, Tap end of arbor with plastic or lead hammer to set arbor in chuck.6.Allow time for Loctite to set per directions on Loctite container.7. This solved problem of chuck dropping off arbor while drilling.
Question:	Is the drill chuck to fit tight to the r8 arbor shank? Mine came pressed together but looks like it could go on another .25 of an inch
Answer:	Yes. It is connected through Jacobs tapered.
Question:	Is there a verified runout on these chucks, or at least a published maximum runout
Answer:	0.005". Thanks.
Question:	Could this clamp into a 1/2" drill? And then the chuck can take a 5/8" shank drill bit
Answer:	Yes, the clamping range is from 1/32" to 5/8"