12 best square hot tubs

Product description

The Coleman SaluSpa Spa is an inflatable hot tub that seats 4 people and is completely portable so you can take it with you on your vacations or relax at home. It has massage jets and a cushioned floor, making it easy for you to unwind. The hot tub inflates within minutes and the rapid heating system quickly heats the water up to a soothing 104 degrees with 114 surrounding air jets. The hot temperature is perfect for soothing sore muscles or lounging after a long day and the digital control panel lets you adjust the temperature without having to get out of the tub. The walls are made of durable TriTech material and have sturdy I-Beam construction, allowing you to sit on the sides thanks to the superior structural stability. There are 2 built-in side handles for easy transportation. This package also includes a chemical floater to keep your spa clean, a twin pack of filter cartridges, and an inflatable cover to keep your water warm when you're not using it. Note that this spa will not run in temperatures below 40 degrees. Disclaimer: This spa cannot be used in temperatures less than 39 degrees Fahrenheit.

• INFLATABLE HOT TUB: The Coleman SaluSpa inflatable hot tub is made for up to 4 people and heats up quickly to a soothing 104 degrees with 114 surrounding air jets
• FEATURES: Relax at the touch of a button with the soothing AirJet Spa, rapid heating system, and integrated water filtration; Cushioned floor with convenient drain valve; Heating and bubbling work together to provide a comfortable massage experience
• DURABLE CONSTRUCTION: TriTech 3 ply inflated walls for durability and comfort; Reinforced cover with safety lock clips and built-in air chamber for insulation; 2 easy-lift handles to help move the spa pool (when empty)
• INCLUDES: Includes 1 pool liner, 1 pool cover, 1 spa pump, 1 chemical floater, 2 filter cartridges (VI), 1 repair patch, 1 AirJet system; 6-foot long cord
• SPECIFICATIONS: Water capacity (80-percent filled): 177 gallons, heat range: 40-104 degrees F, water flow: 320 GPH, and filled weight: 1,938 lbs; 110/120-volt 3-prong plug; Dimensions (L x W x H): 71 x 71 x 28 inches with a Manufacturer warranty (pump): 1-year warranty; Manufacturer warranty (liner): 90-day warranty; Not to be used in temps under 40 degrees; Disclaimer: This spa cannot be used in temperatures less than 39 degrees Fahrenheit

User questions & answers

Question:	how high are the seating
Answer:	You sit on the floor of the interior, so whatever that depth is. I get a little high on chest level as a 5'9" (69") tall male.
Question:	How do you get it to stay at104? Mine shuts off heat at 104 and then doesn't turn on until it gets down to 100 so it's hit or miss when I go to use it
Answer:	I dont know if you necessarily can. I keep mine at 102 and it goes back and forth between 100 and 104 so the temp seems to be +/- 2 degrees or so. I believe this is to keep the heater from constantly running and give it a larger temperature interval to turn on or off.
Question:	what voltage is the heater
Answer:	The pump/heater unit is 110-120V.
Question:	What are the dimensions
Answer:	The exterior dimensions are about 70" square for the pool (just under 6') and the heater/pump sticks out of the middle of one of the sides around 18" and itself is 15" wide. From the outside the pool is just under 30" tall (and the heater/pump is a few inches shorter).

Product description

Always dreamed of having your very own hot tub? The Bestway salsa Hawaii inflatable hot tub is the affordable, go-anywhere spa which can comfortably accommodateup to 6 adults! This fully portable, inflatable hot tub can be easily set up either indoors or outdoors within Min. The Bestway salsa Miami requires no tools or professional installation. With its soothing 104° F water temperature & Massage jets, the Bestway salsa Miami hot tub is perfect for soaking sore muscles, unwinding after a hard day at work or even as a luxurious & romantic treat for you & your partner to enjoy together. The digital control panel allows you to turn up the heat without having to exit the tub. The Miami hot tub Also comes supplied with a cover to maintain optimal water temperature, A set up & maintenance guide, filter cartridges (twin Pack) & a chemconnect dispenser. Dimensions of inflated tub: 71"x 71" x28".

• Enjoy the ultimate spa experience: receive total relaxation when you slip into this square-shaped portable hot tub after a long day. 114 airjets Massage sore muscles for a luxurious treat.
• Operate from inside the hot tub: The digital control panel lets you change the water temperature (up to 104 degrees Fahrenheit) and flow of the jets without stepping out of the tub. A power saving timer can even automate the temperature of the spa up to 72 hours in advance; Cord length: 9 feet; Disclaimer: This spa cannot be used in temperatures less than 39 degrees Fahrenheit
• Design delivers strength and comfort: Bestway Salsa Hawaii's y-beam construction is designed to offer maximum structural stability while maintaining a comfortable and luxurious surface for all guests.
• Simple setup and maintenance: no extra tools are needed to setup This portable spa. Simply inflate and deflate with the spa's own pump! In addition, a reinforced cover with safety lock clips and built-in air chamber for heat insulation covers your spa when not in use.
• Made for on-the-go usage: with lift handles, the spa can be moved around with ease. This spa deflates compactly for optimal storage and transportation purposes.

Product features

4-6 Person Capacity

The Bestway SaluSpa Inflatable Spa has enough seating for 4-6 people. Invite your friends and family over for a great time in your backyard!

Inflates in Seconds

The SaluSpa includes a pump and can be easily inflated and deflated in seconds. This feature allows the tub to be easily moved or stored on demand. Watch the video above to see just how quickly your inflatable spa is set up!

Touch-Sensitive Control Module

Use the touch-sensitive control module to customize the temperature, control the spa jets, and set a timer! Operating the Bestway SaluSpa is simple and easy!

I-Beam Durable Construction

The I-Beam internal design provides stability and support for the inflatable spa, making the SaluSpa more comfortable and durable than the competition. The jacuzzi's seats will hold their shape and stay firm!

Bring the Whole Family Together!

The Bestway Hawaii Air Jet Inflatable Spa makes it easy and affordable to bring your friends and family together for a great time! This inflatable hot tub gives the same quality experience you have come to expect from hard material tubs, at a fraction of the cost!

• Inflatable Hot Tub: The square hot tub has 250-gallon water capacity and holds up to 6 people
• Spa Tub: Ideal for joint/muscular pain, improved sleep, stress and anxiety relief; also great for parties or personal relaxation
• Hot Tub: Heats up to a maximum temperature of 108 degrees; For safest use, it is recommended to set your temperature at 104 degrees or lower. Heating time varies depending on the temperature of the water used to fill the tub; heats 1-3 degrees F/h
• Built-in Features: 1500-watt power pack, 900-watt heater, 600-watt bubbler, 12-Volt AC filter pump (420-gallon capacity); Includes: An inflatable hot tub, a fitted cover, an inflation hose, a filter cartridge, its cover, a ground cloth, and a rubber plug
• Portable Hot Tub: Outer PVC thickness - 0.66mm/264 gauge; Interior PVC thickness - 0.60mm/240 gauge; Outer dimensions - 73 x 73 x 26 inches; Inner dimensions - 59 x 59 x 26 inches; Color: Brown and White

User questions & answers

Question:	Hello, can you please tell me if it plugs in to a standard outlet
Answer:	Yes. Not round
Question:	How long is the power cord
Answer:	It's designed in USA and manufactured in Canada.
Question:	Does this spa have inner support walls like the Coleman or Intex spas have
Answer:	No...
Question:	I have been trying to heat my hot tub for 3 days now and won’t heat past 96 degrees. Can I get some help with troubleshooting
Answer:	It has the smooth plastic housing.

Product features

Inflatable Hot Tubs

Find deep relaxation in your backyard oasis with ALEKO's square inflatable hot tub. The hot tub provides all of the mental and physical health benefits of a traditional hot tub with a more convenient installation process. This hot tub is a wonderful addition to most outdoor living spaces, place it on your patio or in your garden.

Personal spas are a wonderful self-care item that can be enjoyed from the comfort of your home.

Capacity

Square hot tubs are available in 160 gallon capacity, for up to 4 people; and 250 gallon, which can hold up to 6 people.

Personal Spa

Ideal for joint/muscular pain, improves sleep, stress and anxiety relief; also great for parties or personal relaxation.

Fitted Cover

Fitted cover features foil underside that keeps water warm, locks in heat; snaps in place with buckles.

Bubble Jets

The hot tub features 100-130 high powered bubble jets that provide a soothing massage and a cushioned floor so you can sit back and relax.

Built-in Features

The hot tub kit includes a built-in 1500 watt (110-120 volt) power pack, 900 watt heater, 600 watt bubble feature, and 12 Volt AC filter pump.

Digital Control Panel

Heats up to a maximum temperature of 108 degrees; Heating time varies depending on the temperature of the water used to fill the tub; heats 1-3 degrees F/h.

• Find deep relaxation in your own backyard oasis with ALEKO's Square Inflatable Jetted Hot Tub. Ideal for joint/muscular pain, improved sleep, stress and anxiety relief; also great for parties or personal relaxation
• Square hot tub with 265 gallon water capacity; holds up to 6 people. Heats up to a maximum temperature of 108 degrees; For safest use, it is recommended to set your temperature at 104 degrees or lower. Built in features: 1500 watt (110-120 volt) power pack, 900 watt heater, 600 watt bubbler, 12 Volt AC filter pump (420 gallon capacity)
• 100-130 high powered bubble jets provide a soothing massage. Easy to operate digital panel with bubble jet function, temperature/heat controls and filtering
• Fitted cover features foil underside that keeps water warm and locks in heat; snaps in place with buckles. Inflates in minutes and deflates for easy storage; no tools required
• Includes: Inflatable Hot Tub, Fitted Cover, Inflation Hose, Filter Cartridges, Filter Cartridge Covers, Ground Cloth, Rubber Plug, Instruction Manuals and Repair Kit

User questions & answers

Question:	What filter cartridges are compatable
Answer:	It should say in the product specifications section. We did a 220
Question:	Can this be converted to a salt water hot tub
Answer:	Long time
Question:	Can I use it inside too
Answer:	Hello, Thank you for contacting Aleko. Yes, this hot tube does have support walls. Please let me know if you have any further questions. Thank you, ALEKO
Question:	Does this have a regular 110 volt plug
Answer:	It takes time

Product features

ALEKO

Find deep relaxation in your own backyard oasis with ALEKO's Square Inflatable Jetted Hot Tub. This hot tub is a wonderful addition to most outdoor living spaces - place it on your patio, in your garden, or anywhere you like to relax. Personal spas are a wonderful self-care item that can be enjoyed at any time from the comfort of your home. Personal hot tubs are ideal for families, athletes, people who live with chronic pain, people who suffer from insomnia among many others.

Numerous Health Benefits

With its cushioned floor, hot tub immersion provides countless health benefits, including reduced stress and anxiety, better sleep, reduced muscular and joint pain, and more. Personal hot tubs are ideal for families, athletes, people who live with chronic pain, people who suffer from insomnia among many others.

Easy to Operate

The Hot Tub comes with an easy to operate digital panel with bubble jet function, temperature/heat controls and filtering. The fitted cover features foil underside that keeps water warm and locks in heat; snaps in place with buckles. It inflates in minutes and deflates for easy storage; no tools required.

Hot Tub Kit Includes

The hot tub kit includes a built-in 1500 watt (110-120 volt) power pack and a 12 volt (AC) filter pump - just add water! Includes - Inflatable Hot Tub, Fitted Cover, Inflation Hose, Filter Cartridges, Filter Cartridge Covers, Ground Cloth, Rubber Plug, Instruction Manuals, and Repair kit

Product description

This stylish poly rattan square hot tub surround is a versatile accessory for your spa. It gives the spa a chic and modern look, while creating a more functional and user-friendly spa area.

Made of water-resistant PE rattan, the spa surround is easy to clean, hard-wearing and suitable for daily use. The powder-coated steel frame makes the spa enclosure strong and sturdy. The spa steps are made of solid acacia wood, a tropical hard wood, which is weather resistant and durable for years to use. They are finished with natural oil. This product is easy to assemble.

You are sure to value the convenience, durability and the wicker styling of this tub surround!

• Color: Black / Gray
• Material: PE rattan, powder-coated steel, solid acacia wood
• Outer dimensions: 105.5" x 105.5" x 21.7" (L x W x H)
• Inner dimensions: 74" x 74" x 21.7" (L x W x H)
• Step dimensions: 27.6" x 15.7" x 9.8" (L x W x H)
• With 2 wooden spa steps
• Assembly required: Yes

• Color: Black/Gray
• Material: PE rattan, powder-coated steel, solid acacia wood
• Outer dimensions: 105.5" x 105.5" x 21.7" (L x W x H)
• Inner dimensions: 74" x 74" x 21.7" (L x W x H)
• Step dimensions: 27.6" x 15.7" x 9.8" (L x W x H)

• 【KICK UP YOUR FEET】Relax at the touch of a button with the 61*61*26 massage system, soothing Air Jet system, rapid heating system, and integrated water filtration. Hard water treatment system makes water gentler on skin, clothes and the entire spa system
• 【SECURE YOUR SPA】A cover maintain the water's warm temperature, and keep the water clean from debris. Double safety lock clips and built-in air chamber for insulation and safe. Easy to move with lift handles. Easy storage and transportation
• 【COMPLETE CONTROL】Digitally controlled pump with soft-touch control panel to meet the needs of 2-3 adults. Heat the water up to 104 degrees or use the automatic start/stop timer-controlled heating system with 120 surrounding air jets
• 【SUPERIOR STRENGTH AND DURABILITY】 The puncture-resistant material and construction ensures your hot tub never loses its shape and stability even when people sit on the side walls. Extra durable construction stands up to plenty of use all season
• 【ONE YEAR WARRANTY】 We stand by the quality of our HOT TUB and are glad to provide a 1 year manufacturer’s warranty at no additional cost. With tens of thousands of boards sold across the world, you can trust Aquaspa as the leader in quality and fun
• 【WHAT'S INCLUDED】Filter Cartridge X 2, Zip Cover X 1, 1 Way Valve X 1, Air Valve Cap X 2, Repair Kit X 2, Inflation Hose X 1, Drainage Bung X 1, Child Safty Key X 2, Filter Cover X 1, Water Inlet / Outlet Spanner X 1, Ground Sheet X 1

User questions & answers

Question:	Electric cord attached or purchase separate
Answer:	8
Question:	or 220 voltage
Answer:	Thank you for your interest in our Natural Chemistry Mite and Lice Spray. Yes, you can spray your parakeets from several inches away if there is an infestation suspected. Be sure this is done in a warm environment in order to keep the parakeets from chilling and that all food and water is removed from the cage prior to misting. We recommend getting an official confirmation of mites being present from your veterinarian prior to use.
Question:	Does the water stay at the same temperature all the time
Answer:	Yes. But not an excessive amount and not of the face area
Question:	I am needing an address to contact someone to help me with my hot tub I’ve only had it three months and it’s no longer working
Answer:	Yes. I've had to use it on a ball python. Worked really good.

Product features

RAPID HEATING SYSTEM

Heats up quickly to a soothing 104 degrees with 120 surrounding air jets.

Theoretically, it can be heated to a maximum of 104℉(40℃) when the environment temperature is over 30 degree, otherwise, it can be heated to a maximum of 90℉(35℃) only.

INTEGRATED WATER FILTRATION

Water treatment system makes water gentler on skin, clothes.

The cover is used for heat preservation, and avoid falling into dust.

Double safety lock clips and built-in air chamber to keep insulation and safe.

AIR JET SYSTEM

Heating and bubbling work together to provide a comfortable massage experience.

The bubble comes up from floor but it massages your lower and upper back, it not like jets but it feels good and relaxing. You can sit on the bottom without any discomfort.

Turn on / off by pressing the "Bubble" button on your control panel.It will keep working for 15 mins, then it will rest 30 mins. This is an automatic loop operation.

WHAT CAN YOU GET?

Filter Cartridge X 2

Zip Cover X 1

1 Way Valve X 1

Air Valve Cap X 2

Repair Kit X 1

Inflation Hose X 1

Drainage Bung X 1

Child Safty Key X 2

Filter Cover X 1

Water Inlet / Outlet Spanner X 1

Ground Sheet X 1

FOR 2-3 PERSON

Inner: 1.14 X 1.14 X 0.65 m / 44 X 44 X 26 inches

Outer: 1.54 X 1.54 X 0.65 / 60 X 60 X 26 inches

Net Weight：26 kg / 57.2 lbs

Gross Weight: 28 kg / 61.7 lbs

Power: 110-120 V

Capacity: 600 L / 158 Gal The

Largest Bear: 210 kg / 462 lbs

The Heater's Power: 1200w

Power Cord: 3.3m (130 inches) Water temperature range: 68°℉ – 104°℉/20℃-40℃

TRANSPORTATION & CONVENIENCE

The side handles make it easier for us to move the hot tub. Less than 5 minutes to inflate. Approximately 45-60 minutes to fill water,but it also depends on the rate of injection. No more than 20 minutes to deflate. Easy for use, storage and transportation.

FLITER & REPLACEMENT PERIOD

Fliter Material: 100% Polyester

Fabric + ABS Plastic

Size: 10x10x8cm（4”x 4”x 3”)

Weight: 82 g / 0.18 lbs

Replacement Period: If used daily, chang it every 168 hours (7 days). For weekend use only, change it every 2 weeks. Or you can check the condition and cleanliness of the filter to determine if it need to be changed.

• 【2020 NEW DESIGN INFLATABLE HOT TUB】 - U-MAX 2020 new design inflatable hot tub is made for up to 4-6 people and the built in hard water treatment and filtration system makes water gentler on skin for a soothing experience, balmy AirJet system, cosy heating system protect your skin from severe temperature changes.
• 【DURABLE & SECURE CONSTRUCTION】 - Equip faux leather pool cover with double safety lock clips and built-in air chamber for insulation, it could improve the energy efficiency of your spa tub by up to 50%. TriTech 3 ply inflated walls for durability and comfort and cushioned floor with convenient drain valve.
• 【ADVANCED WATER PURIFICATION & FILTRATION EQUIPMENT】 - We have adopted the latest water filtration system, each portable spa tub includes two Spa Filter Cartridges for simple maintenance to keep your spa clean and refreshing. You can enjoy the pleasant bubble massage brought by 120 air jet vents and serve you. The temperature in the spa can be raised to 108°F to deeply relax the tissues.
• 【ALL IN ONE & PORTABLE SPA】 - 1 x Inflatable Hot Tub with AirJet system, 1 x Pool Top & Ground Cover, 1 x Inflation Hose, 1 x , 2 x Filter Cartridges, 1 x Repair Kit. Seating capacity: 2-4 people; Water capacity: 211 Gallons; Water temperature range: 68-108°F.
• 【PROFESSION CUSTOMER SERVICE】 - U-MAX Customer service team will be online all day. If you have any problems, issues or questions, please contact us and we will reply you asap.

Product features

Specifications:

• - External Diameter: 73"
• - Internal Diameter: 59"
• - Hot Tub Height: 25.6” (H)
• - Number of Air Jets: 140 * φ0.12inch
• - Cable Length: 10.8FT
• - Water Capacity: 240Gal(910L)

Product description

• Color: Gray
• Material: PE rattan, powder-coated steel, solid acacia wood
• Outer dimensions: 105.5" x 105.5" x 21.7" (L x W x H)
• Inner dimensions: 74" x 74" x 21.7" (L x W x H)
• Step dimensions: 27.6" x 15.7" x 9.8" (L x W x H)
• With 2 wooden spa steps
• Assembly required: Yes

• This stylish poly rattan square hot tub surround is a versatile accessory for your spa. It gives the spa a chic and modern look, while creating a more functional and user-friendly spa area.
• Made of water-resistant PE rattan, the spa surround is easy to clean, hard-wearing and suitable for daily use.
• The powder-coated steel frame makes the spa enclosure strong and sturdy.
• The spa steps are made of solid acacia wood, a tropical hard wood, which is weather resistant and durable for years to use.
• They are finished with natural oil. This product is easy to assemble.

User questions & answers

Question:	Does it come in any other colors
Answer:	I have used this for 10 years along with Nature2 Clarifier, it kick starts the nature2 when you change your water every 4 months by dumping a capful of product in and running 30 to 60 min. after that initial set up I throw in a tablespoon when I get out, that way it's always ready to use that's it, simple as that!
Question:	can this product be used with an inflateable hot tub
Answer:	I shock it with chlorine after I change the water. Also I am using a Silver Ion Sanitizwe filter within the filtering system. Then after each use I add non chlorine shock according to the directions for the amount of water in the tub. Keep in mind if your water is hard you will need to add calcium to make it soft or it will turn your water green. I hope this helps it took me a long time to get it all right!
Question:	What Size of hot tub does it fit
Answer:	Not sure! The ingredients are listed as Sodium dichloro-5-triazinetrine 58.2% & other ingredients as 41.8%. Not totally helpful! However my hot tub sales person said not to use chlorine in the hot tub and this is the product they recommend, so based on that info I'd say it does not contain chlorine.

Product description

The Coleman SaluSpa Spa is an inflatable hot tub that seats 4 people and is completely portable so you can take it with you on your vacations or relax at home. It has massage jets and a cushioned floor, making it easy for you to unwind. The hot tub inflates within minutes and the rapid heating system quickly heats the water up to a soothing 104 degrees with 114 surrounding air jets. The hot temperature is perfect for soothing sore muscles or lounging after a long day and the digital control panel lets you adjust the temperature without having to get out of the tub. The walls are made of durable TriTech material and have sturdy I Beam construction that allows you to sit on the sides of the spa thanks to the superior structural stability. There are 2 handles built into the sides for easy transportation. This package also includes a chemical floater to keep your spa clean, a twin pack of filter cartridges, and an inflatable cover to keep your water warm when you're not using it. This package also includes the Qualco QLC-14895 At Home 6-Month Spa Hot Tub Kit. This handy kit is ideal for use with portable home spas or hot tubs and is comprised of formulas that work in conjunction with each other. The kit includes 2 50-count Bromine Test Strips, 3.5 pounds of Brominating Tablets, 2 18-ounce bottles of Chlorine Free Shox Oxidizer Shock Treatment, 1 pound of Spa pH Plus, 20 ounces of Spa pH Minus, and 1 pint of Spa Mineral Myte Keep your portable spa/hot tub healthy and ready to use with this kit from Qualco.

• Coleman SaluSpa Inflatable AirJet Hot Tub, Gray
• Pamper yourself in relaxing heated water surrounded by soothing bubble jets
• Digitally controlled pump with soft touch control panel
• Reinforced cover with safety lock clips and built in air chamber for insulation
• Soothing AirJet system has the power of 114 air jets

User questions & answers

Question:	What type of material is exterior made of
Answer:	Thick rubber
Question:	How tall is the hot tub? we would like to drop it into our 4 foot high deck. I Need to know the height of the tub
Answer:	Approx. 28 inches from floor to top.
Question:	How does it keep its heat in the winter
Answer:	It is good. You have to keep it on which can be a little expensive on the power bill, but it only drops a couple degrees when the lid is off for a couple hours.
Question:	What are the internal measurements, one says 24.2” x 21.4” x 32.1” and in another place it says it’s 55” x 55” x 23”. So how large/small is this
Answer:	55 x 55 x 23 are the correct dimensions of the interior.

Product description

Mspa Lite Alpine M-019 is a quality outdoor spa. It boasts 132 air jets with whisper quiet technology for optimal relaxation. The air jets release bubbles that surround, support & massage your body for a luxurious experience. The M-019 is Charcoal grey rhino-tech 6-layer reinforced pvc with a metallic silver premium pvc liner, square shaped and inflatable with 6 bather seating capacity, a built-in heater and a control system. Priced for the everyday man The Lite Alpine is the luxury that fits your budget.

• This item will be delivered curbside. To have the item delivered to a location of choice on your property, kindly make additional arrangements with a third party provider ahead of delivery
• 132 Air Jets
• Whisper Quiet Technology
• 6 Bather Seating
• Built In Heater
• LED Control Panel

User questions & answers

Question:	What are the package measurements
Answer:	Sodium dichlorvos-s-triazinetrione. 58.2%. Hope this helps
Question:	Does this come with cartridges that need replaced ? I see others with motors or heaters with cartridges attached
Answer:	Powder, and it’s awesome. The only treatment I’ve used in my spa for over 4 years. Keeps it fresh and crystal clear with a cap full about once a week, sometimes an extra half a cap in the summer.
Question:	Where do i purchase filters for this tub?? Is there a link
Answer:	Yes The mineral cartridge works very well with the Caldera Salt System
Question:	What is the voltage? I need a 220v spa
Answer:	You need to use a sanitizer along with this oxidizer product. (Chlorine, Bromine or Mineral Purifier)

Product description

Sink into the warm, bubbling Coleman air jet spa to relax, unwind & lounge around after a long, hard day! The air jet bubbles are released from the bottom of the spa to create a warm, bubbling hot tub environment. These soothing bubbles will help you relax & unwind. This Spa’s inflatable walls are made of durable, puncture-resistant, UV-resistant Tritech material to prevent damage & to retain its shape no matter how many times it is inflated & deflated. The Coleman spa comes with a reinforced cover with safety clips for extra insulation. This spa set also comes with a pump that inflates it, heats it up, runs filtration & Controls the massage system, along with a chemconnect chemical dispenser. The connect dispenser maintains clean, healthy water by providing a stable level of chlorine That is evenly dispersed throughout the spa.

• Enjoy the ultimate spa experience: nothing beats the feeling of sinking into a warm, bubbling Jacuzzi after a long, hard day while jets project bubbles to massage your back, neck, and shoulders.
• Easy to operate: the digital control panel lets you dictate the water temperature (up to 104 degrees Fahrenheit) and pressure of the jets. A power saving timer can even automate the temperature of the spa up to 72 hours prior to save energy and money.
• Durable and innovative construction: The spa's durable PVC material and I-beam construction offer superior strength and stability while ensuring your hot tub never loses its shape.
• Simple setup and maintenance: no extra tools are needed to setup This portable spa. Simply inflate and deflate with the included pump! A cover comes with for an extra Safety feature, maintain the water's warm temperature, and prevent debris from getting in the tub.
• Benefits of a portable hot tub: with lift handles, the spa can be moved around with ease. This spa deflates compactly for optimal storage and transportation purposes.
• Power Source Type: Electrical Outlet

User questions & answers

Question:	Would it be dangerous to put this in an apartment? How stable is this for a 250 pound man and his 150 wife? How do you drain it if it is safe
Answer:	i have this product I modern floor are rated for 400 pds per square inch I had it in a mobile home all set up and it was awesome it held my 600 pds in human plus the water weight I think it will be fine for you and your wife the room I had it in had no windows and it was more humid in there but no mold be sure to rinse the filters everyday and pool shock it every couple weeks it need like 2 table spoons of shock very in expensive and it is 400 pds per square inch any online research will tell you that
Question:	Filled weight would be too heavy for a deck, right
Answer:	It really depends on the deck. Your truck would put all the weight on only 4 points (the tires), and no way would I put that on a deck. But 2000 lbs from a spa like this is evenly spread out over a 77" diameter circle. My own deck has 2x8 joists, that only span 6 feet between leg supports, with 2x6 boards on top, and the joists are 16" on center. I would have no hesitation putting 1 ton of weight on that, spread over such a large area. ( I also doubt your truck only weighs 1936 pounds... that lighter than a small car!)
Question:	can u use this in the cold
Answer:	It does fine in the cold! We've been using ours in the recent 2 week cold snap. Our is sitting out on a deck with a piece of 1" foam board insulation under the ground cover. It has no trouble maintaining 104 degrees with the top cover on it. The heater can't keep up when the cover is open though. The temp will drop to 102 in about 30 minutes once the cover is open. And if you turn the bubbles on the temperature drops like a rock. Probably drops 2 degrees every 10 minutes with the bubbles going. My son and I were out in it the other day when it was 8 degrees and windy out. Only problem we had was our wet hair kept freezing into icicles LOL. Was awesome. Coldest I've been in it was 2 degrees the other night. I have no plans of turning it off at all this winter. I'm afraid to look at my next electric bill though. Also, be sure to be aware of the fact it automatically turns off in 3 days if you don't push any buttons. If it turns off in extreme cold for long I'd expect the pump to freeze and ruin the whole thing. I use it every night before bed and just play with the buttons a little. That seems to reset the 3 day timer. Also, you need to be aware that if you have a momentary power outage, the hot tub will not turn back on automatically, so if your microwave clock is flashing you need to go restart the hot tub :)
Question:	Does it come full full or am I responsible for providing the water
Answer:	As others have reported, mine also came with the dehydrated water cubes. After much deliberation, we decided to set the cubes aside and as we are water vegan. As a replacement, we went very green and decided to turn the heater on full blast and go with heated hot tub air! Very low impact on the environment...nothing is better that getting into a pair of trunks and settling down into the relaxing tub on 104 degree air...so so nice on your back. The pump provides great atmospheric bubbles of air up and down our backs! The only issue we have is the rapid temperature change of the air we already preheated. We do however get about 12 to 15 second air soak times after the cover is removed! Cheers!
Question:	Does this include the sand to dust the surface with after
Answer:	It does not come with sand, apply the deck-o-seal and pour silica sand over it immediately . You can purchase silica sand at Lowes or Home Depot. Unfortunately, you will have to purchase more than you will need but the price is very reasonable.
Question:	Do i need to add color ? says” deck o seal tan”is it tan color ? i’m confused
Answer:	yes, it is tan. you have a big can and the little can. the little can is the color. you mix together. the kits come in white, tan and grey. if you dont want to mix, you can get HS1 which is already mixed. 32 oz. pouches.
Question:	is this the 96 oz kit
Answer:	Yes this is 96 oz kit.
Question:	How much is the deep and wide gap should be ? And if isnot in range what i should feel the gap with . I just did mine with polymeric sand only
Answer:	Mine was fairly deep and I used the rope caulking so my gap to fill was about 1/2 x 1/2” some areas were almost 1” wide by 1/-3/4 deep. It worked great
Question:	Can this be used on a shower floor
Answer:	I would not recommend this for shower floors.
Question:	Can it applied over painted cool deck and patch repairs
Answer:	As long as the Cool Deck has been previously painted with a water-based paint, yes you can. It can also be painted over patches if that's what your asking.
Question:	Can this be used on block wall
Answer:	I don’t see why not. It’s just a little bit thicker then paint.
Question:	How can I get this tinted
Answer:	To tint this you add 1gallon of paint in the color you want. We have several Amazon listings with paint that will work well in it. Message me and I will direct you to them. You can purchase both at once and I will mix here at the shop.
Question:	Is this acrylic based pait
Answer:	Yes, easy clean up latex
Question:	Does it say if you can use this on metal pools
Answer:	To the best of my knowledge, No it does not. It is very good paint that needs to be thinned but is meant for concrete pools.
Question:	Can this be used on fiberglass pools
Answer:	Yes
Question:	do you have to use primer first
Answer:	I haven’t used primer, also make sure to apply paint during the right temp, to hot and paint will bubble. Also make sure to let it cure
Question:	I have some cracks inside the expansion joints, will this work
Answer:	Deck-O-Seal flows a great deal when wet before it sets up. It has to be constrained or it will flow away. You will have to pour fine sand in the crack to create a floor for the product to sit in if you prepare the joint properly you will love this product.
Question:	From the 1st step to the last is it hard to keep debris out of the pool? Thanks
Answer:	It's unclear to me whether or not we're talking about a vinyl pool and a stone edging around it or is it a plaster pool as far as debris is concerned you need to look at the trees the wind direction and the time of the year generally if you're living in the east August would be the best time to do this
Question:	How long does it take to dry? I have a pool party in a week
Answer:	Overnight, if you mix it right.
Question:	How do I remove leaves and debris after it has dried
Answer:	after it dries it is hard to remove small debris but if you can rub a sponge back and forth over the leaf you might be able to sand it down.
Question:	can it be used on galvanized steel (stock tank
Answer:	no,need special paint for galvanized steel.
Question:	My pool has a plaster finish. Do I need to use a primer before applying this paint
Answer:	I don't think so- you will need to clean it with TSP. You can check the web site to be sure.
Question:	Can this be used on a fiberglass pool with white gelcoat
Answer:	I am not an expert, but I see no reason you couldn't, it works well even over old pool paint
Question:	How much paint is needed
Answer:	How much paint is needed for a 18 x 34 pool
Question:	Do you have to apply the cool deck coats and then another clear sealer on top of that? What kind of clear sealer do you get
Answer:	The COO! pool deck BUNDLE comes with one gallon of Triple Crown Cleaner and a half gallon of the SealBack Clear Sealer. SealBack is a water based acrylic sealer that is engineered for sealing the COOL! coating itself. It's water thin, delivering great penetration. We recommend 2 GOOD coats of COOL in the morning hours before temperatures get too hot (use 3/4" nap rollers) , and 2 THIN coats of SealBack during the hottest part of the day(use 1/2" nap rollers)! The SealBack sealer loves to be applied in the bright sunshine for maximum cure. Thank you and reach out to us anytime! (888) 776-2242 .
Question:	How long does it take for the sealer to dry
Answer:	Hi. Thanks for your question. In a typical application, the sealer will be dry and open for foot traffic in one hour. However, you should not apply the sealer if rain is in the 24 hour forecast. Hope this helps! We appreciate your interest in our product.
Question:	Can this be used on a wooden deck
Answer:	Hi. No. Cool is only for concrete. Thanks for your interest in our product.
Question:	What type of paint and how much
Answer:	Add 1 gallon of paint to the product.
Question:	Does this include the sand to dust the surface with after
Answer:	It does not come with sand, apply the deck-o-seal and pour silica sand over it immediately . You can purchase silica sand at Lowes or Home Depot. Unfortunately, you will have to purchase more than you will need but the price is very reasonable.
Question:	Do i need to add color ? says” deck o seal tan”is it tan color ? i’m confused
Answer:	yes, it is tan. you have a big can and the little can. the little can is the color. you mix together. the kits come in white, tan and grey. if you dont want to mix, you can get HS1 which is already mixed. 32 oz. pouches.
Question:	is this the 96 oz kit
Answer:	Yes this is 96 oz kit.
Question:	How much is the deep and wide gap should be ? And if isnot in range what i should feel the gap with . I just did mine with polymeric sand only
Answer:	Mine was fairly deep and I used the rope caulking so my gap to fill was about 1/2 x 1/2” some areas were almost 1” wide by 1/-3/4 deep. It worked great

Product features

In The Swim Patio and Deck Paint

In The Swim Patio and Deck Paint is a water-based acrylic non-slip concrete deck coating. Patio and Deck Paint can be applied to damp surfaces, cutting the time between site preparation and roller painting. First time applications will require a minimum two coats depending on surface porosity. Patio and Deck Paint should be applied with a 1/2" nap roller on smooth surfaces. Use a 3/4" nap roller cover on rougher surfaces. Coverage: 90 - 125 sq ft per gallon on average. If the outside ambient air temperature if above 80°F, wait 4 hours between coats. Curing time: Before foot traffic is 24 - 48 hours depending on the outside ambient air temperature.

Determine Area Size

Determining the square foot of the area you are coating is important. This will help you figure out how many gallons of paint are needed to complete the job. It’s important to take the surface porosity and smoothness into account when deciding how much paint to purchase. Start by measuring the length and width of the area. Once you have those measurements plug them into the formulas below. Divide that number by the coverage square foot of the coating you are wanting to use. That will give you the number of gallons that you should purchase. Remember to look and see if the paint requires a single or multiple coats and if it needs a primer.

Prepare the Surface

When preparing a surface for a coating of any kind it is important to clean the area. Start by sweeping, scraping, and scrubbing the area removing any loose debris. Then hose and scrub the surface with tri-sodium phosphate 10% solution. The solution will degrease and rid the surface of any unwanted contaminants. We suggest on smooth surfaces to do a light acid wash to etch the surface. The etching will allow the paint to adhere to the surface firmly. Hose and scrub the area again with the tri-sodium phosphate 10% solution. Hose completely clean. This will remove additional debris and neutralize the acid. Allow the surface to dry with no puddles or standing water.

First and Second Coats

In The Swim Patio and Deck Paint should be applied to a damp surface with no standing water. Use a 1/2" nap roller on smooth surfaces. Use a 3/4" nap roller on rough surfaces. Roll on the first coat of paint allow a minimum of 4 hours before starting the second coat. After the 4 hour wait you are clear to roll the second coat. Wait 24 - 48 hour before the area can take heavy traffic. Coverage: 90 - 125 sq ft per gallon on average.

In The Swim CRC Pro-Series Chlorinated Rubber-Base Pool Paint

In The Swim CRC Pro-Series Chlorinated Rubber-Base Pool Paint is a self-priming paint designed as a re-coat for existing rubber-base finishes. If re-coating an existing interior, one coat is suggested. A second coat may be required on unpainted or porous surfaces. Chlorinated Rubber-Base Pool Paint has excellent chemical resistance and color retention, allowing the paint to last 3 years on average. Coverage: 250 square feet per gallon on average. This product should be applied with a 9" roller equipped with a 3/8" nap. Pot Life: Indefinite as long as it is properly sealed. Allow to cure 4 - 6 hours in between coats. Cure 10 days minimum before filling.

Determine Area Size

Determining the square foot of the area you are going to paint is important. This will help you figure out how many gallons of paint are needed to complete the job. It’s important to take the surface porosity and smoothness into account. When looking at how much paint you should purchase. Start by measuring the length and width of the area. Once you have those measurements plug them into the formulas below. Divide that number by the coverage square foot of the paint you are wanting to use. That will give you the number of gallons that you should purchase. Remember to look and see if the paint requires single or multiple coats and if it needs a primer.

Drain Water

Now that you have selected the paint type and know the square footage of the interior, it’s time to drain the pool. Rent or purchase a submersible pump. As soon as the outside ambient air temperature drops below 85° F. Check the local code for where pool water can be drained and start pumping. If the outside ambient air temperature is above 85° F stop draining the pool. At these elevated temperatures, the interior surface can crack and lose its structural integrity. While the pool is draining, remember that you can start to prepare the pool for paint.

Prepare for Paint

Now that the pool has been drained, you can start to prep the interior for paint. Start by removing the perimeter return jets, pool/spa light, main drain covers, aerator fittings and any other item you don’t want painted. Using painters tape, carefully tape off all the tile line, step/bench tiles, return lines, and skimmer mouth. Once you have everything taped off it’s time to prime.

Primer Coat

Now that the pool has been drained and taped, it’s time to prime. Remember not all types of paint use a primer. So if you have paint that doesn’t use a primer, skip to the painting step. Roll the primer onto the interior surface of the pool using a 9” roller with a ½” nap, starting with the walls and ending with the floor. Once you’ve completed priming allow the prime to cure for 24 - 48 hours. Then it’s time to paint.

Painting Interior

The pool has now been drained, taped, and primed. It’s time for paint. The type of paint you choose will determine the number of coats. Start painting the walls first and finish with the floor. If the paint you are using requires a time period in between coats, make sure you take that time. It will allow the paint to cure and harden increasing its chemical resistance and life span. It is suggested for steps, shallow areas and wading pools, sprinkle sand on the coating before it dries to make the area slip-resistant.

Fill and Balance

Now that the pool is painted and the paint has cured, it’s time to fill the pool and balance the water. Depending on your area you may need to order a water truck to deliver. If you have a garden hose available, toss it in. The average pool should take anywhere from 36 - 48 hours to fill. Once the pool is full allow the fresh water to circulate for 3 - 4 hours. After the circulation period it’s time to complete the first water test of many on the new water. Make sure to test the water weekly to maintain proper water balance and overall pool health.

In The Swim Aqua Coat Water-Base Swimming Pool Paint

In The Swim Aqua Coat Water-Base Swimming Pool Paint is a water-based acrylic pool paint. Aqua Coat can be applied to damp surfaces. This water-based acrylic pool paint can be applied to previous acrylic coating or over rubber base paint. Versatile water-based acrylic pool paint yields a short down time of only 3 days in most cases. Requires a minimum of 2 coats on initial application. Coverage: Approximately 250 - 300 sq ft per gallon. Should be applied with a 9” roller equipped with a ⅜” nap. Apply second coat at least 4 hours after the first coat. Pot Life: Indefinite as long as it is properly sealed. Allow to cure for 2 days before filling.

Determine Area Size

Determining the square foot of the area you are going to paint is important. This will help you figure out how many gallons of paint are needed to complete the job. It’s important to take the surface porosity and smoothness into account. When looking at how much paint you should purchase. Start by measuring the length and width of the area. Once you have those measurements plug them into the formulas below. Divide that number by the coverage square foot of the paint you are wanting to use. That will give you the number of gallons that you should purchase. Remember to look and see if the paint requires single or multiple coats and if it needs a primer.

Drain Water

Now that you have selected the paint type and know the square footage of the interior, it’s time to drain the pool. Rent or purchase a submersible pump. As soon as the outside ambient air temperature drops below 85° F. Check the local code for where pool water can be drained and start pumping. If the outside ambient air temperature is above 85° F stop draining the pool. At these elevated temperatures, the interior surface can crack and lose its structural integrity. While the pool is draining, remember that you can start to prepare the pool for paint.

Prepare for Paint

Now that the pool has been drained, you can start to prep the interior for paint. Start by removing the perimeter return jets, pool/spa light, main drain covers, aerator fittings and any other item you don’t want painted. Using painters tape, carefully tape off all the tile line, step/bench tiles, return lines, and skimmer mouth. Once you have everything taped off it’s time to prime.

Primer Coat

Now that the pool has been drained and taped, it’s time to prime. Remember not all types of paint use a primer. So if you have paint that doesn’t use a primer, skip to the painting step. Roll the primer onto the interior surface of the pool using a 9” roller with a ½” nap, starting with the walls and ending with the floor. Once you’ve completed priming allow the prime to cure for 24 - 48 hours. Then it’s time to paint.

Painting Interior

The pool has now been drained, taped, and primed. It’s time for paint. The type of paint you choose will determine the number of coats. Start painting the walls first and finish with the floor. If the paint you are using requires a time period in between coats, make sure you take that time. It will allow the paint to cure and harden increasing its chemical resistance and life span. It is suggested for steps, shallow areas and wading pools, sprinkle sand on the coating before it dries to make the area slip-resistant.

Fill and Balance

Now that the pool is painted and the paint has cured, it’s time to fill the pool and balance the water. Depending on your area you may need to order a water truck to deliver. If you have a garden hose available, toss it in. The average pool should take anywhere from 36 - 48 hours to fill. Once the pool is full allow the fresh water to circulate for 3 - 4 hours. After the circulation period it’s time to complete the first water test of many on the new water. Make sure to test the water weekly to maintain proper water balance and overall pool health.

Product description

Intex PureSpa Inflatable Hot Tub provides relaxation at the touch of a button. The easy-to-use control panel activates the high performance bubble jets surrounding the interior of the spa for a refreshing massage. The heating system adjusts to fit your personal temperature preference for maximum relaxation. PureSpa provides simple maintenance with easy-to-replace filter cartridges for lasting enjoyment for up to 4 people. Includes: tub, insulated cover, heating filtration air blower hard water

• The built-in hard water treatment system makes water gentler on skin for a soothing experience
• An insulated cover and lock is included to minimize heat loss and provides an added safety feature
• Pure spa provides simple maintenance with 2 easy-to-replace filter cartridges for clean refreshing spa water
• Includes: heating system, 3-way test strip, 2 filter cartridges, floating pool chlorine dispenser, thermal ground cloth, inflation hose, carry bag
• Seating Capacity: 4 People; water capacity: 210 gallons; water temperature range (68 Degrees - 104 degrees)
• California Residents: This item can only be shipped to California when bundled with the Intex Deluxe Energy Efficient Cover - B084CDHYQN

User questions & answers

Question:	As a full time rver, space is important. i need to store when traveling. what is the size when deflated
Answer:	probably about 4'x3'
Question:	How long does it take to heat up
Answer:	I let heat up overnight about 12 -16 hours to get to 104 degrees
Question:	Can you use it for cood water in the summer
Answer:	Yeah just don’t turn the heater on
Question:	What size filters does it use
Answer:	Intex is now gouging just like people buying up masks and hand sanitizer b/c nobody can go to the store. Freaking pigs preying on people buying the tub for therapeutic help for arthritis. Went from $2.50 per filter to now $5.50 per filter. Amazon should step in this is such garbage