12 best lathe for wood

Product description

Remember when you could turn your own pens? Fill your house with as many pens as you can with the WEN 8-inch by 12-inch variable speed mini wood Lathe. Adjust the variable speed anywhere from 750 to 3200 rotations per minute. The WEN 8-inch by 12-inch variable speed Benchtop wood Lathe features an MT1 spindle and Tailstock taper to tightly grip workpieces, two tool rests (4-1/2 inch and 7 inch) to provide needed support for chisels and tools during operation, and a 3.2-Amp motor to keep things turning. The easy-to-use Lever clamping system makes adjustments to both the tool rest and the Tailstock simple and precise. The WEN wood Lathe also includes a flat wrench, a headstock spur center, A Tailstock cup center, A knockout rod and a 2.3-Inch faceplate for non-spindle work pieces. And, because its a WEN product, your Lathe comes backed by a two-year warranty, a nationwide network of skilled service technicians and a friendly customer help line. Remember when you could turn pens, chess pieces and more? Remember WEN.

• Perfect for pens, bowls, cups, chess pieces, and other small workpieces
• Fits workpieces up to 12 inches long and 8 inches wide
• 3.2-Amp motor provides over 50% more power than most 8-inch wood lathes
• Adjust the soft start variable speed motor anywhere from 750 to 3200 RPM
• Features a 2.3-Inch face plate, an MT1 spindle and tailstock taper, and two interchangeable tool rests

User questions & answers

Question:	Anybody know the thread size for the three tapped mounting holes on the underside of the lathe
Answer:	From their website: Benchtop mounting bolts: 0.30 Inch x 20 TPI (M8 x 1.25 pitch)
Question:	can you use a dedicated pen drilling chuck on this on this model 3420 or will it burn up the motor. I want to drill my blanks with it to
Answer:	I use a drilling chuck for all my pen blanks. As suggested, drill slowly, and frequently pull out the drill to remove shavings, as the blank may overheat and split.
Question:	How long did it take for you to get it? Says it ships in 2 months, with Prime
Answer:	When bought this lathe, they sent me 2. That being said, I got it when they said I would get it.
Question:	I'm interested in buy this lathe, does it run with 220 v or 150v, here were I'm living we run only 220. Waiting for answer, regards
Answer:	110

Product features

WEN 3421 3.2-Amp 8" by 12" Variable Speed Mini Benchtop Wood Lathe

You will now easily be able to fit work pieces up to 12 inches long and 8 inches wide with the WEN 3421 3.2-Amp 8" by 12" Variable Speed Mini Benchtop Wood Lathe. The minimal design is ideal for pens, bowls, cups, chess pieces, and other small work pieces. You will be able to take on larger projects around your home with this tool.

Straightforward, Sturdy and Easy to Operate

With a stunning build quality, the WEN 3421 3.2-Amp 8" by 12" Variable Speed Mini Benchtop Wood Lathe provides sturdy frame for various work pieces. Made from cast iron, features a 2.3 inch face plate, an MT1 spindle and tailstock taper and two interchangeable tool rests for added versatility.

• 【1/2 HORSE POWER MOTOR】- 1/2 Horse Power motor, Voltage: 120V. The powerful  motor starts softly offering motor's maximize safety and low noise.
• 【4 GRADE SPEEDS】- The adjustable belts can be adjust with ease and accuracy within 3400 RPM, 1100, 1600, 2300, 3400prm available.
• 【LARGE WORK CAPACITY】- 40" (1000mm) distance between centers, Cutting Diameter 14" (350mm). High concentricity. Moving tailstock to adjust proper distances for workpieces.
• 【SOLID STEEL CONSTRUCTION】- Solid steel constructed wood lathes for durability and strength, providing increased stability and smooth operation, reducing vibration.
• 【FREE WRENCHES & CHISELS】- 3 wrenches are for easy using and maintainance. 3 chisels for free also, 1 x Skew Chisel, 1 x Shear Scraper and 1 x Spindle Gouge.

User questions & answers

Question:	Can you do aluminum
Answer:	It was not be cost effective because you would need too many attachments. You’d have to modify the tool rest. It would turn it but you couldn’t hold the tool to turn it without modifications. There are lathes out there built for using with aluminum. Hope this helps
Question:	Will the wen la4444 4-inch 4 jaw self centering chuck set with -inch x 8 tpithread fit this lathe
Answer:	https://www.amazon.com/gp/product/B000KI8CBQ/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&psc=1 This is what you need
Question:	does this brand and model come in 220 volt
Answer:	Only 110 volts
Question:	What are the minimum and maximum clamping measurements
Answer:	0 to 40 inches

Product features

Powerful Motor

1/2 Horse Power motor, Voltage: 110V, starts softly to offer motor's maximize safety and low noise design.

Variable Speed

Optimally designed speed ranges of 1100-3400 RPM variable speed.

Large Work Capacity

40" (1000mm) distance between centers, swing over bed 14" (350mm). High concentricity.

Accurate & Stable

Steel constructed mini lathes is of increased stability and smooth operation.

7W LED Work Light

3 wrenches are for easy using and maintainance. 3 chisels for easy carving work.

Wide Application

Wood turning lathe, an ideal tool for various operations such as cutting, sanding, knurling, drilling, or deformation.

14 in. x 40 in. Wood Turning Lathe & Variable Speed 3400RPM

Our 14 in. x 40 in. Variable Speed Wood Turning Lathe features variable speed 1100-3400 RPM, a 1/2hp motor. Soft startups ensure safety to both workpieces and the motor. Precise design is perfect for high speed sanding and polishing of finished work.

Product description

Specification:

Diameter: 300mm (12 Inch)

Material: Acrylic

Thickness: 5mm

Application: Wood working tool

Color: Transparent

Package include:

1 x Center Finder Compass

Guarantee

If you have any problems, you can contact us at any time, we promise we will try our best to help you under 24 hours.

• This center finder is perfect for laying out bowls, trays and platters
• Finding the center of irregular shapes to optimize yield is simple and easy
• Made from clear, fully transparent acrylic with a center hole and clearly marked circles in 5mm increments
• The circle center finder tool helps produce maximum yield on logs smaller than 300mm in diameter
• The lathe center finder works on wood, poster board, plastic, metal, glass, composites and more! Center Finder Compass is perfect for wood turners, arts,crafts, school projects, rough and finish carpenters or use it anywhere you need to draw a circle

Product description

1/3 Horsepower bench top lathe with variable speed motor

• Motor: 1/3 HP, 2 Amp, 110V, Single-phase, 60 Hz
• 12-inch distance between centers
• 8-inch swing over bed
• Cast iron construction and infinitely variable speed control
• Includes two tool rests

User questions & answers

Question:	I have a chuck that is 1"-8tpi female thread (nova 48111), it doesn't fit on this lathe. what adapter should i buy
Answer:	Buy a 3/4" 16 TPI to 1" 8 TPI adapter. If you further questions go to http://www.woodturningz.com/downloads/w1704_ds.pdf for the specs on this machine.
Question:	is there an adapter for the face plate for mounting live center chucks? I bought one but won't line up with holes
Answer:	I'm not sure if they make the adapter to mount on the face plat. I have a 2" diameter three jaw,self centering scroll type chuck that i bought from Amazon that ihave used that works great,but i think that the holes in the face plate is for mounting a backing block to the piece of wood stock to turn a bowl. It says in the manual that you glue the block to the wood your turning and use the holes to screw the block on to face plate. Hope this helped.
Question:	What size wood stock can it hold? How about something like 12'' long by 8" wide piece of wood
Answer:	The length it will hold will be dependant upon what chucks you have in the head and tail stock. The bulkier the chucks, the shorter the length it will handle. I'd say it will hold 12" lengths unless your chucks are sizable. I wouldn't try more than 4" width stock unless it was short. Although the lathe may hold the stock, it would be too much for the motor. The intended purpose of this lathe is to make small things like ink pens, Christmas ornaments, small toys like tops or yo-yo's and tool handles etc. If you want to mount 12" X 8" stock you should be looking at full sized lathes.
Question:	is there anyway to secure to a bench
Answer:	Yes. It has has three holes in the base that you can bolt it down with. I bolted mine down on a metal stand. It holds it down real solid. Mine is the Shop Fox W1704 also. It is well built. I really like mine. Hope this helps!

Product features

Shop Fox W1704 Benchtop Wood Lathe

Tackle pen turning or other small cutting or shaping projects using the Shop Fox W1704 bench-top lathe from Woodstock International. Made of cast iron, and designed to fit neatly on a workbench, this lathe features a 1/3-horsepower, variable-speed motor and delivers spindle speeds between 700 and 3,200 revolutions per minute (RPM). It also features a safety paddle switch, an MT No. 1 spur center, an MT No. 1 live center, 4-1/4-inch and 7-inch tool rests, a 5-3/4-inch faceplate, and a 3/4-by-16-inch TPI RH spindle.

Includes Two Tool Rests

The W1704 includes both a 4-1/2 and 7-inch tool rest for various turning applications and with a 13-inch distance between centers and an 8-inch swing over the bed this lathe is ideal for a variety of turning projects.

Variable Speed

The infinitely variable speed from 700-3200 RPM comes in handy when turning hard or soft species of wood.

5-3/4-inch Faceplate Included

This benchtop lathe includes a 5-3/4-inch faceplate which threads onto the headstock spindle for non-spindle turning (usually used for making bowls or other items that cannot be supported from the tailstock).

Product description

Ideal chisel kit for turning pens pepper mills spindles bowls and lots more woodturning projects of all sizes Each chisel measures 16-1/4" in length with a 6-1/4" M2 High Speed Steel blade and a 10" hardwood turned handles Set includes chisels 3/16" Parting Tool 5/8" Spear Scraper 1" Skew Chisel 5/8" Skew Chisel 5/8" Round Nose Scraper 1/2" Bowl Gouge 3/4" Spindle Gouge 7/8" Roughing Gouge Includes wooden case for storage and carrying Great for woodworkers woodturners and penturners of all skill levels

From the Manufacturer

We have assembled this 8-piece set to satisfy the majority of your turning needs. It is suitable for turners of all skill levels. It is the ideal kit for turning small pens, spindles, bowls and larger projects. The M2 High Speed Steel 5-1/4-Inch blades outlast high carbon steel 6-to-1 and will give you years of use. The set includes 8 essential chisels: 3/16-Inch Parting Tool, 5/8-Inch Spear Scraper, 1-Inch Skew Chisel, 5/8-Inch Skew Chisel, 5/8-Inch Round nose scraper, 1/2-Inch Bowl Gouge, 3/4-Inch Spindle Gouge, 7/8-Inch Roughing Gouge. It also comes with beautifully turned 10-3/4-Inch hardwood handles in an attractive wood display box

• Ideal chisel kit for turning pens pepper mills spindles bowls and lots more woodturning projects of all sizes
• Each chisel measures 16-1/4" in length with a 6-1/4" M2 High Speed Steel blade and a 10" hardwood turned handles
• Set includes chisels 3/16" Parting Tool 5/8" Spear Scraper 1" Skew Chisel 5/8" Skew Chisel 5/8" Round Nose Scraper 1/2" Bowl Gouge 3/4" Spindle Gouge 7/8" Roughing Gouge
• Includes wooden case for storage and carrying
• Great for woodworkers woodturners and penturners of all skill levels

User questions & answers

Question:	Do i need to have a high speed bench grinder or slow speed
Answer:	Slower is better than higher. Try not to use a wheel that is lower than 80 grit. 100 seems best. If you go up to high, you end up heating the tool too much.
Question:	are these benjamins best
Answer:	Yes, these are the Benjamins Best tools. I'm enjoying them very much.
Question:	What type of grinding wheel should I use to sharpen these chisels, being made with M2 High Speed Steel
Answer:	For scrapers and gouges, I use a belt sander. For skews and bedans I use a wet stone grinder. I use a polishing wheel with emery compound to hone all my blades between sharpenings.
Question:	Are these "Benjamins Best" (as recommended by Wood Magazine)? Description doesn't say
Answer:	My set has "Benjamins Best" stamped right on the handles.

Product features

HSS Wood Lathe Chisel Set

We've assembled this 8 piece set to satisfy the majority of your turning needs suitable for turners of all skill levels. An ideal kit for turning pens or much larger projects on lathes of any size. The set includes 8 essential chisels with beautifully turned hardwood handles packaged in a practical and attractive wood display box.

• VARIABLE SPEED - This 12 x 18" wood lathe is featured with 550W powerful motor and variable speed with digital readings for you to work with precise speed
• WORK CAPACITY - Swing over bed 12" (300 mm). 18" (457 mm) distance between centers, swing over bed 10" (254 mm), 6" (150 mm) tool rest, 3" (75 mm) face plate, top drive and live center
• STABLE OPERATION - Cast iron constructed wood lathe with rubber feet, providing increased stability and smooth operation
• DELICATE WORKMANSHIP - All gears and shafts in headstock have been precisely grounded and hardened for longer service life and mute operation. High quality electronic units are applied throughout the machine
• APPLICATION - Bench top wood lathe, an ideal tool for use in labs, workshops, engineering and education

User questions & answers

Question:	Where is it made
Answer:	The unit sets on my lathe bed and the screw goes through it and connects to the other part under the lathe rails to anchor it to the lathe
Question:	What is yhe size of the spindle screw? not the bore but the threads. 1' 8tpi, 1.25 8tpi (threads per inch
Answer:	it should it fit my nova miney lathe
Question:	this unit comes with no instructions? there is a parts bag with no explanation on any of it or what its ? there website does not have any info at all
Answer:	I don't know, but on the lathe I have, I had to purchase a longer screw to hold the steady rest on the rails.It worked well fro me. I haven't seen the Delta 46-460 lathe.Enjoy working on the your lathe, it will give you ours of fun.
Question:	What is the thread count
Answer:	I haven't really tried to see how big it can get, I think it could probably work for nearly ten inches, maybe more. I was surprised by how sturdy it is, and have been very pleased with it

Product features

Powerful Motor

550W Power motor, turning speed 500-3800 RPM, Voltage: 120V/60Hz. Our powerful motor starts softly to offer motor's maximize safety and low noise design.

Variable Speed

Variable spindle speed of 500-3800 RPM

High precision, able to turn out standard qualified works

Longer operating life, high torque

Large Work Capacity

MT2 headstock and tailstock taper, 18" (460 mm) distance between centers, swing over bed 12" (300 mm), 6" (150 mm) tool rest, 3" (75 mm) face plate, top drive and live center.

Stable Operation

Cast iron constructed mini lathes is of increased stability and smooth operation.

Rails have been quenched with high frequency and elaborate milling

Digital Readout

Speed infinitely variable, easy to read via digital speed display

Wide Application

Bench top wood lathe, an ideal tool for use in labs, workshops, engineering and education.

Specifications

• Power: 550W, 110V/60Hz
  • Distance Between Centers: 18" (460 mm)
  • Swing Over Bed: 12" (300 mm)
  • Tool Rest: 6" (150 mm)
  • Face Plate: 3" (75 mm)
  • Taper of Spindle Bore: MT2
  • Range of Spindle Speeds: 500-3800 RPM infinitely variable
  • Taper of Tailstock Quill: MT2
  • Gross Weight: 88 lb (40 kg)
  • Package Dimensions: 34"* 19"* 12" (84* 46* 30 cm)

Product description

JET JWL-1221VS 12"x21" Variable-Speed Wood Lathe (719200)

• VERSATILITY: 24 integrated indexing positions.
• CONVENIENCE: Easy-to-reach controls and DRO.
• OPTIMAL SPEED: Choose from 60 to 3,600 RPM.
• INNOVATION: Ratchet-style belt tension system (patent pending).
• ON-BOARD STORAGE: Two handy tool caddies.

User questions & answers

Question:	Will 1221 tail stock accept #2 Morse taper drill chuck
Answer:	Yes! Just be sure that the tail stock hole and morse taper are clean, otherwise the #2 morse taper can be difficult to remove...
Question:	has this lathe have a indexing head
Answer:	William, yes this lathe has an indexing head. I have not yet used the feature but it is done with a spring loaded pin which you lock into anyone of 24 positions. The spring loaded pin in screwed in once the pin is set to hold it in place.Rich F
Question:	Is this Ron Swanson approved
Answer:	Yes, Ron personally blesses each unit as it’s loaded onto a truck.
Question:	Do you need to move a belt to change speeds? Or is there a dial or switch
Answer:	This lathe has a variable speed controller, so the speeds may be changed using the simple rotating knob. To provide speed ranges to suit any situation, especially for the more experienced turner, there is a three step pulley. This arrangement allows the variable speed controller to adjust speeds from 60 to 900 rpm on the low step of the pulley, 110 -1800 rpm on the 2nd step (medium), and a high speed range of 220 -3600 rpm on the the 3rd step. The belt need only be changed if you want to move to a different range of speeds. This is a very simple process.

Product features

JET 12'' X 21'' Variable Speed Wood Lathe - JWL-1221VS

The JET 1221VS lathe is different from anything we’ve made before. In truth, it’s different from anything that anybody has ever made before. The design is better. The features are better. The entire turning experience is better. And it all focuses on one concept … Control.

Product description

This is the video for how to use it: https://www.youtube.com/watch?v=Q03KevOqizM

Description:

This is a mini Buddha bead machine, compact and portable size, powerful woodworking lathe and beautiful appearance.

It also fits other DIY usage such as model,hobby DIY.

Specifications:

Material: Aluminum Alloy + Acrylic

Color: Silver

Plug Type: US Plug

Voltage: AC 100-240V 50/60Hz

Rated Voltage: 12-24V DC

Rated Power: 100W

Rated Speed: 1500-7000RPM

Power: 7 Level of Adjustable Speed

Processing Length: 140mm / 5.51in

Processing Diameter: 55mm / 2.16in

Chuck Clamping Range: 0.6-6.5mm / 0.02-0.25in

Swing Diameter: max 50mm / 2.0in

Grip Length: max 140mm / 5.51in

Matching Saw Blade Diameter: max 50mm / 2.0in

Machine Weight: 1436g / 3.17 lb

Package Included:

1x Mini Lathe Beads Machine

1x Speed Control Power Supply (12-24V)

6x Wood Carving Blade

1x Screw Thread Fixed Needle

3x Hex Shank Fixed Needle

1x Collet Wrench

1x Hexagon Wrench

3x Beads Round Device(12,18,22mm)

1x 50mm Cutting Piece

1x 50mm Diamond Cutting Piece

1x Polishing Plate

5x Polishing Piece

1x Polishing File Tool

1x Mini Caliper

NOTE:

1. If the user does not have lathe base experience, when using, uses should follow: low speed, slowly, cautiously and use other security operations.

2. The speed can be adjusted in 1500-7000RPM, speed of cutting wood should not exceed 4000, grinding can use higher speed.

3. Drill chuck axis, the axis of the wood, the tailstock center axis of the drill should be in a straight line, or need to adjust the nut.

4. If not a cylinder, the speed should be reduced.

5. Tailstock bearing without lock tight.

6. When using a knife, locking the bottom of screw, location should be away from timber 1-1.5cm.

• Specially designed for the home DIY enthusiasts and hobbies,small and portable size with strong power.
• Transparent organic dustproof glass cover with super convective cooling hole, the welding line is covered with a full heat shrinkable tube.
• With 7 levels of power adapter enable you to adjust the rotating speed easily to meet different cutting speed.
• High quality aluminum alloy base and pure steel structure drill chuck.
• Super large torque ball bearing motor, maximum rotating speed up to 7000RPM providing ultra strong cutting power with low noise, you can use it at home.

User questions & answers

Question:	Is this lathe just for producing beads? Or can it be used for other small projects
Answer:	Hello friend, Yes,of course it can be used for other small projects.As long as the the sizes of the tools match your project,this is a DIY tool set.
Question:	Can i make pens and rigs on it
Answer:	NO you can not make pens or rigs, there is not enough power to do anything on it.
Question:	is the plastic cover removable
Answer:	Hello friend, If you don't want the plastic cover,you can disassembly it with the screws.
Question:	I just bought this. How do i get it to fit my 5/8 mandrel. I bought this to make duck calls. But cant figure out what i need to make it fit.what do i
Answer:	Swap out chuck.

Product description

Specification：

Tool holder material: stainless steel

Tool handle material: alloy aluminum

Tool head material: alloy

Product size: 31*20*6

Weight: 1600g

Package:

1*knife handle

1*Extension rod

1*square replacement blade

4*knife handle

2*Accessories

1*Wooden box

• [Rugged and durable] Lathe tools include roughing machines, finishing machines, hollow processing machines and detailing machines, which can make any workpiece on your lathe work quickly. These tools share a handle, which is made of aluminum alloy and has a long service life.
• [Sharp and precise] The wooden lathe tool set can provide smooth and neat cutting effects, and provides 4 types of tools, these tools are designed for different grinding effects. Importantly, it saves a lot of grinding and honing time because you can easily replace the blades when they become dull. (You will get another square replacement blade in the package.)
• [Ergonomic design] Woodworking turning tools are designed with a slender matte black handle, which is comfortable to hold. In addition, an extension rod is also equipped, which can be used in deeper scenes. Since it is not flammable, it is a safe choice.
• [Easy to use] The wood turning tool set ensures a good entry-level setup and use. It is perfect for you, beginners who lack confidence or craft enthusiasts who need alternative options to complement your tools.
• [Widely used] The exquisite wood chisel used for lathes can cut V-shaped grooves, make curves and concave surfaces, and engrave lines according to your needs.

Product description

8PCS HSS Wood Turning Tools w/ Portable Handle

Our lathe tools woodworking feature quality polished wood handles and 60CRV blades, suitable for wood working, lathes, carving projects, etc. Compact and lightweight wood box bring you easy to use and take with.

Chisel Set

1 x Skew Chisel, 2 x Flat Chisel, 2 x Triangular Knife, 3 x Gauge Chisel, 1 x Fan-shaped Head Chisel, 1 x Moon-shaped Head Chisel,

SSH Blades

60CRV blade, heat treated, shrill edge with fine grinding. Blade Length: about 3.9"/100mm

Comfortable Handle

Stained hardwood handles. Ergonomic design and smooth surface. Handle Length: 4.13"/105mm

Tight Connection

Blades and handles are connected tightly by durable brass ferrules.

Portable Box

Wooden case with 2 tight buttons, 2 flexible hinges and grooves for easy storage. Portable handle included.   

Wide Application

Ideal for carving bowls and various woodturning projects on wood lathes.

Specifications

Blade Material: 60CRV

Handle Material: Hardwood

Blade Length: about 3.9"/100mm

Handle Length: 4.13"/105mm

Chrisle Length: 8.46"/215mm

Box Size(LxWxH): 12.4"x9.65"x1.38"/31.5x24.5x3.5cm

Package Content

1 x Skew Chisel(13.75mm)

2 x Flat Chisel (6.25, 12.80)

2 x Triangular Knife (14mm, 16mm)

3 x Gauge Chisel (6, 16, 23mm)

1 x Fan-shaped Head Chisel (7mm)

1 x Arc Chisel (12mm)

1 x Moon-shaped Head Chisel (19 mm)

1 x Wooden Box

• The package includes: 1 x Skew Chisel (13.75mm), 2 x Flat Chisel (6.25, 12.80mm), 2 x Triangular Knife (14mm, 16mm), 3 x Gauge Chisel (6, 16, 23mm), 1 x Fan-shaped Head Chisel (7mm), 1 x Arc Chisel (12mm), 1 x Moon-shaped Head Chisel (19 mm), 1 x Wooden Box. Chrisle Length: 8.46"/215mm
• Accurately pre-sharpened blades are made from 60CRV, Blade Length: about 3.9"/100mm
• Features stained hardwood handles with ergonomic design and smooth surface. Handle Length: 3.5"/90mm. Blades and handles connected tightly by durable brass ferrules
• Wooden box with 2 tight buttons and 2 flexible hinges for storage and carrying. Large foam base offering clean and no-damaged space. Size: 12.4"x9.65"x1.38"/31.5x24.5x3.5cm
• Wood turning tools for lathe are suitable for wood working, lathes, carving projects, etc

Product description

12-1/2" x 24" VSR MIDI Lathe. 1HP motor delivers all the power you need for turning spindles to large bowls or platters.. Big turning capacity of 12-1/2" diameter swing and 20" between centers.. 24 Postion Index head allows accurate pattern or design work on projects.

• 1HP motor delivers all the power you need for turning spindles to large bowls or platters.
• Big turning capacity of 12-1/2" diameter swing and 20" between centers.
• 24 Postion Index head allows accurate pattern or design work on projects.
• Electronic variable speeds 250-3850RPM with LED display and forward/reverse functions.

User questions & answers

Question:	What taper is the headstock and talestock
Answer:	Hi W James,Both are #2 Morse tapers. Hope that helps!
Question:	What is the tool post diameter
Answer:	Tool post dia. is 1"
Question:	Wich are the dimensions of the lathe
Answer:	Thank you for your questions Jose T. The machine dimensions are 40-3/4" L x 12" W x 17-5/8" H. I hope this helps.
Question:	Does the head have a 1 x 8 thread pattern
Answer:	Hello Robert,Yes, it is 1" x 8 TPI. Good question.

Product description

Shop Fox High Speed Steel Lathe Chisel, with beautifully finished ash handles.

• High Speed Steel
• Item Package Dimension: 22.5" L x 1.5" W x 1.5" H
• Item Package Weight: 1.06 lb
• Model Number: D3804

User questions & answers

Question:	Is this a standard grind or a fingernail grind
Answer:	Easy to do.
Question:	Is the flute round or a V shape
Answer:	I just shook them around and they fluffed up
Question:	Is the bar 1/2 in in diameter, or is the opening in the flutes 1/2 inch wide
Answer:	Hi, it doesn't have a port for microphones. You may check other details of the unit by visiting our website pyleaudio.com. Type the model number on the search box PMP23SL for more details. Thank you.