14 best bicycle pedals for mtb mountains

• STURDY & DURABLE: Rugged nylon fiber surface+high strength Cr-Mo spindle bike pedals, which has shock-proof, abrasion and corrosion resistance
• GREAT GRIPS: Anti-skid nails on each side provide more secure on the pedals and hold your feet in place. Even if they are covered with a thick layer of mud after a muddy ride, you don't worry your feet slipping off the pedals
• WIDER PLATFORM & LIGHTWEIGHT: 4.1" wide platform and 0.8lb ultralight ergonomic design pedals with high speed DU bearings for long ride comfort and improve pedaling efficiency
• EASY TO INSTALL: CR-L for left; CR-R for right. Sealed bearing bicycle pedals protect spindles from water and dust which will cause noise and other problems, let you enjoy cycling in raining or climbing
• UNIVERSAL: Standard 9/16" spindle fits for BMX, MTB, Mountain Bike, Hybrid bike, Old School, Cruiser, Cyclocross Bike, Dirt Jumper, Folding Bike, Road Bike- Touring, Track Bike, Unicycle, Urban Bike - Fixed Gear

User questions & answers

Question:	Can these pedals fit a polygon siskiu n9 dual suspension mountain bike
Answer:	They’re the exact same pedals for a lot less. Mine are preforming flawlessly.
Question:	Where can you purchase additional spare studs if you run out
Answer:	You can recess the screws if you want, but I did not because I usually wear basketball shoes or running shoes when I am riding my mountain bike. If I get into a situation where the grass or ground is wet, the spikes make sure my feet do not slip off the pedals. I also have a city bike with less agressive plastic spikes. I took the comfort pedals off the city bike and switched them with the original mountain bike pedals, and then these more aggressive pedals on the mountain bike, because especially in the early morning when the grass is wet and I stop to cross a grass medium my feet would get wet and when I put them back on the pedals they may slip. With these there is no slippage.
Question:	are these good for general in town riding or specifically for mtb trail or dirt biking
Answer:	Weird question but for $20 I bought a set. I've got over 500 miles on mine without any issues. If they break I'll pick up another set for sure.
Question:	is there allen on inside of pedal spindle (inside crank side) to install/uninstall? much easier than pedal wrench
Answer:	Yes. I've been using these for aggressive trail riding and some jumping for a few weeks now. No issues whatsoever. Grippy, light, and the exact same pedal as the more expensive Raceface Chesters.

Product features

Replaceable Pins

The hex-head threaded traction pins are replaceable, you can replace them whenever necessary. There are 20 hex-head threaded traction pins per side for providing sufficient grip and control while being the easiest to get off of in the event of a crash.

CR-L & CR-R

CR-L for left pedal and CR-R for right pedal. Before you install the new pedals, look for the 'L' and 'R' marking on the axle.

Standard 9/16”

Standard 9/16" spindle fits for BMX, MTB, Mountain Bike, Hybrid bike, Old School, Cruiser, Cyclocross Bike, Dirt Jumper, Folding Bike, Road Bike- Touring, Track Bike, Unicycle, Urban Bike - Fixed Gear.

The Best Choice for Riding

1. The flat pedal has a Nylon composite body and weighs only 0.4lb per side, a lighter flat bicycle pedal make you more energy efficient.

2. The platform is quite large to fit any size of foot or shoe, and the pedal surface features small pins help to keep your feet in place.

3. The bike pedals are exceptionally easy to use and install, which makes them the best choice for commuting.

• Wide Platform Pedals: Lightweight Nylon composite body with a concave platform offers an optimal surface area for long ride comfort and pedaling efficiency.
• Build to last: Fully sealed bearing bicycle pedals keep spindles from water and dust which ensure great durability and performance.
• Safety first: 12 replaceable hex-head threaded traction pins per side offer more bite for increased grip and control.
• Easy to install: 4.8*4.1*0.9 inches, L for left pedal, R for right pedal. Standard 9/16” sturdy Chromoly steel axle bearing fits for most bikes.
• Universally: Suitable for commuting, recreational riding, BMX, cruisers bicycle, kids' bikes, road bicycles, MTB bicycle, mountain bicycles, junior bicycle, city bicycle, etc.

User questions & answers

Question:	Can I put toe cages on these, or do the pins help replace the need for toe cages ? Do you get enough traction to increase the up stroke like cages
Answer:	There is a built in pillow.
Question:	Is the “blue” option more of a turquoise color
Answer:	Yes
Question:	will these pedals work with straps
Answer:	They only take naps til age 5 in preschool. This will work for a 5 year old.
Question:	Does it use a 15 mm wrench
Answer:	21 x 46

Product features

Waterproof Bicycle Pedal

1. The flat bike pedals are constructed from nylon composite, so the overall weight of these pedals is kept to a lightweight level, made by waterproof materials which means that it ensures lasting performance.

2. In addition, the bearings are sealed to keep out weather and prevent some damage to the pedal axle itself over.

3. With the dual design, Puroma platform pedals were not only made to be comfortable but also made to last a long time.

CR-L & CR-R

There is a user-friendly design for convenient installation. CR-L for left pedal and CR-R for right pedal. Before you install the new pedals, look for the 'L' and 'R' marking on the axle.

Replaceable Hex-head Threaded Pins

There are 12 hex-head threaded traction pins per side for providing sufficient grip and control while being the easiest to get off of in the event of a crash. Besides, as the hex-head threaded traction pins are replaceable, you can replace them whenever necessary.

Standard 9/16” for Universal Use

Standard 9/16″ threads to fit seamlessly with most bikes. Such as BMX, cruisers bicycle, kids' bikes, road bicycles, MTB bicycle, mountain bicycles, junior bicycle, city bicycle, etc. It will make sure you're riding far safer and avoid worrying about the screw loosening during cycling.

DU Material Washer

The rubber gasket constructed from DU material, so the overall weight of these pedals is kept to a minimum and use the DU material can decrease wear and tear , made to last a long time.

A Great Choice for Commuting

Commuting to work on your bike will save you money on fuel, at the same time, it will reduce your environmental impact. This flat pedal will help you reach that goal.

1. The flat pedal has a Nylon composite body and weighs only 6.28 OZ per side, a lighter flat bicycle pedal make you more energy efficient.

2. The platform is quite large to fit any size of foot or shoe, and the pedal surface features small pins help to keep your feet in place.

3. The bike pedals are exceptionally easy to use and install, which makes them a great choice for commuting.

• DURABLE:Rugged nylon fiber surface+high strength Cr-Mo spindle bike pedals, which has shock-proof, abrasion and corrosion resistance
• SIZE:4.30(L)*3.94(W)*0.98(H)inches,0.79bls each pair,moer fitted to the soles,big tread bicycle pedals provide a more comfortable ride experience,make the ride safer
• Easy To Install:CR-L for left; CR-R for right. Sealed bearing bicycle pedals protect spindles from water and dust which will cause noise and other problems, let you enjoy cycling in raining or climbing
• Anti-Skid Nail:Anti-skid nails on each side provide more secure on the pedals and hold your feet in place. Even if they are covered with a thick layer of mud after a muddy ride, you don't worry your feet slipping off the pedals
• Standard: 9/16" spindle fits for BMX, MTB, Mountain Bike, Hybrid bike, Old School, Cruiser, Cyclocross Bike, Dirt Jumper, Folding Bike, Road Bike- Touring, Track Bike, Unicycle, Urban Bike - Fixed Gear 2 configuration:3 bearings and needle roller bearing can be chosen.

User questions & answers

Question:	These are just knock-off of raceface chesters right
Answer:	No. I used the provided shims in my Lake MX237.
Question:	Can screws be recessed? will you feel pressure points with thinner sole shoes such as puma speed cats
Answer:	Yes the do come with cleats. 2 different sets
Question:	Are these legal to sell? they are exact copies of the raceface
Answer:	If your peloton uses a standard 9/16th thread then it should work. Google would give you the answer om your peleton thread
Question:	this may sound like a dumb question, but can you stand on these pedals
Answer:	they are light but very resistant to the weight and the passage of time. Buy !!

Product features

3 bearings / needle bearings

2 configurations, three bearings / needle bearings

Replaceable Pins

The hex-head threaded traction pins are replaceable, you can replace them whenever necessary. There are 16 hex-head threaded traction pins per side for providing sufficient grip and control while being the easiest to get off of in the event of a crash.

CR-L & CR-R

CR-L for left pedal and CR-R for right pedal. Before you install the new pedals, look for the 'L' and 'R' marking on the axle.

Standard 9/16" spindle fits for BMX, MTB, Mountain Bike, Hybrid bike, Old School, Cruiser, Cyclocross Bike, Dirt Jumper, Folding Bike, Road Bike- Touring, Track Bike, Unicycle, Urban Bike - Fixed Gear.

• LEFT & RIGHT PEDALS : To easy installation,We have divided the pedals on the left and right with signs, L for left; R for right. International standard 9/16 inch screw thread fits for BMX, MTB, Mountain Bike, Hybrid bike, Old School, Cruiser, Commuter Bike, Dirt Jumper, Folding Bike, Road Bike- Touring, Track Bike, Unicycle, Urban Bike
• LIGHTWEIGHT AND DURABLE: This mountain bike pedals weight only 0.66lbs(302g) , Sealed bearing biking pedals protect spindles from water and dust and let you enjoy cycling wherever you want with no worries. What’s more,This bike flat pedals was made with CNC integration aluminum alloy material,give you a sense of security, no matter how rough the terrain
• WIDE PLATFORM & SUPER GRIPPY: With 101mm wide platform pedals supports the foot more evenly when riding, provide more comfortable riding experience for you. Perfect for most shoes size under US 12 shoes.Besides, Stainless steel anti-skids spikes on each side of the mountain bike pedals provide the good grip for you,the studs effectively prevent your shoes from sliding off
• ULTRA SMOOTH BEARINGS: The spindle was made of chrome-molybdenum steel material, which is stronger than ordinary steel and features better load-bearing performance. Carbon fiber bushing outside of spindle make it more durable and anti-corrosion,keep flat pedals spin smooth and without noise .And gasket design prevent the water,dust or sand from entering to the road bike pedals to avoid the noise.In addition, The outer surface of the bearing in the middle is also protected by aluminum alloy
• LIFETIME WARRANTY: ROCK BROS ensures you a risk-free purchase! We offer you a full money back with any questions. You can receive your full money back if our product does not live up to your expectations. Your satisfaction is our highest priority

User questions & answers

Question:	Is the blue a metallic torquise, as pictured, or is the blue more of a metallic royal? Thanks
Answer:	The pins work incredibly well , you shouldn't need cages.
Question:	anyway to replace the pins
Answer:	Yes, it's a turquoise not a blue color.
Question:	Is it possible to replace the pins with sharper ones
Answer:	If you are going to use the non-slip bolts you may not be able pull your foot out in case of a sudden stop. I would say no.
Question:	I d never had rockbro pedals before...how are they
Answer:	Yes. 15 mm open end wrench fits.

Product features

CR-L & CR-R

There is a user-friendly design for convenient installation. CR-L for left pedal and CR-R for right pedal. Before you install the new pedals, look for the 'L' and 'R' marking on the axle

Durable Hex-head Threaded Pins

There are 8 hex-head threaded traction pins per side for providing sufficient grip and control while being the easiest to get off of in the event of a crash

Standard 9/16”

Standard 9/16″ threads to fit seamlessly with most bikes. Such as BMX, cruisers bicycle, kids' bikes, road bicycles, MTB bicycle, mountain bicycles, junior bicycle, city bicycle, etc

Wide Bicycle Pedals

We design with 104mm wide pedals, Suitable for most foot size. can withstand high pressure, durable without breaking,pls use with confidence

• STURDY & DURABLE: Rugged nylon fiber surface+high strength Cr-Mo spindle bike pedals, With 3 bearings，which has shock-proof, abrasion and corrosion resistance
• GREAT GRIPS: Anti-skid nails on each side provide more secure on the pedals and hold your feet in place. Even if they are covered with a thick layer of mud after a muddy ride, you don't worry your feet slipping off the pedals
• WIDER PLATFORM & LIGHTWEIGHT: 4.4" wide platform and 0.8lb ultralight ergonomic design pedals With 3 bearings for long ride comfort and improve pedaling efficiency
• EASY TO INSTALL: CR-L for left; CR-R for right. Sealed bearing bicycle pedals protect spindles from water and dust which will cause noise and other problems, let you enjoy cycling in raining or climbing
• UNIVERSAL: Standard 9/16" spindle fits for BMX, MTB, Mountain Bike, Hybrid bike, Old School, Cruiser, Cyclocross Bike, Dirt Jumper, Folding Bike, Road Bike- Touring, Track Bike, Unicycle, Urban Bike - Fixed Gear

User questions & answers

Question:	Will these fit a trek marlin
Answer:	I own this exact guitar strap. I think it is fantastic quality for what you pay! I didn’t find the strap to feel cheap.
Question:	Will these fit a older giant
Answer:	The eyelets on both ends are pretty stiff. It hasn't dropped on me and I don't expect it to.
Question:	do these really have three bearing? one of first reviews says it's not true
Answer:	Yes
Question:	I wear a size 13 extra wide shoe. Is this pedal large enough
Answer:	The thin portion of the strap can be put through any of the slots and anchored by the wider section. almost like a slip tie.

Product features

Newest design

Adopt the latest design structure

Resistant to crashes

Dust and waterproof seal

Effective master file

Replaceable Pins

The hex-head threaded traction pins are replaceable, you can replace them whenever necessary. There are 20 hex-head threaded traction pins per side for providing sufficient grip and control while being the easiest to get off of in the event of a crash.

CR-L & CR-R

CR-L for left pedal and CR-R for right pedal. Before you install the new pedals, look for the 'L' and 'R' marking on the axle.

Standard 9/16" spindle fits for BMX, MTB, Mountain Bike, Hybrid bike, Old School, Cruiser, Cyclocross Bike, Dirt Jumper, Folding Bike, Road Bike- Touring, Track Bike, Unicycle, Urban Bike - Fixed Gear.

• WIDER PLATFORM & LIGHTWEIGHT: 4.56" Wide and 5.35" Length ( L x W ) Extra large platform bike pedals will provide more secure on the pedals and hold your feet in place. Only 0.92lb/pair( 416g ). Lightweight pedals will save your energy during riding
• DURABLE & STABLE: Pedals body with nylon composite fiber material and CR-MO steel spindle make mountain bike pedals more stable and durable,high strength,and anti-corrosion
• ANTI-SKID & GREAT GRIPS: 10 anti-skid nails on each side increasing the friction will provide a safe ride on Rainy days & bumpy roads.GREAT GRIPS:Even if the nylon pedals are covered with a thick layer of mud after a muddy ride, never worry your feet slipping off the pedals! Also provide EXTRA NAILS to replace
• SEALED BEARING: Sealed DU bearing bicycle pedals protect spindles from water and dust,also keep pedals spin smooth and without noise,Even if they are covered with a thick layer of mud after a muddy ride.Just enjoy you cycling in raining or climbing
• EASY TO INSTALL: CR-L for left pedal, CR-R for right pedal,Universal Standard 9/16 inch Cr-Mo steel spindle suitable for Mountain Bike, Folding Bike, Road Bicycle, Fixed Gear, BMX, MTB, Cruiser, Cyclocross Bike,etc

User questions & answers

Question:	What is the weight limit
Answer:	Yes. This Guitar strap have the leather strap hooks. it works well with acoustic guitar electric guitar bass folk and more.
Question:	Why have these doubled in price? They used to be about $21-22 and now they are $44! Still a good deal, but the price increase is shocking
Answer:	It's for electric or acoustic guitars
Question:	Is it a pair or one pedal
Answer:	The smell actually comes from the plastic bag that the strap is shipped in. Most people don't smell anything, but there are a few people who are very, very sensitive to it. Candidly, if it is bothering you a lot, it may never go away enough for you to be okay with it, but it would be worth a try to just wipe the strap down with any mild household or leather cleaner that you have around.
Question:	Can you remove nails
Answer:	I did not use any locks on this strap out of the box. The leather is a little thick, so the strap holes are work very nicely, no modifications needed. I really like this strap, wide with is very comfortable, the length adjustment feature works really well, the strap looks Great!

Product features

Product Detials

• 4.56" Wide and 5.35" Length ( L x W ) Extra large platform bike pedals will provide more secure on the pedals and hold your feet in place.
• Pedals body with nylon composite fiber material and CR-MO steel spindle make mountain bike pedals more stable and durable,high strength,and anti-corrosion.1
• 0 anti-skid nails on each side increasing the friction will provide a safe ride on Rainy days & bumpy roads.

Product description

Mountain Bike Pedals, Road Bike Pedals Non-Slip 9/16” Aluminum alloy Platform Pedals, Sealed Bearing Bicycles Platform Flat Pedals for Road Mountain MTB MBX Bike



Features:

1.Mountain Bike Pedals,12 pins per pedal keep your feet planted well.

2. Bike pedals 9/16,Reflectors per pedal can greatly increase visibility in the dark. Simple and important features can greatly enhance your security.

3. 9/16” screw thread can fit most of the bike, including mountain bike, city bike, road bike, folding bike, including indoor exercise bikes and spinning bikes, outdoor bikes.etc.



Tips:

1. Our pedals are marked with "L" and "R" labels for you to install correctly.

2. Please measure the size you need according to your bike. ① Our pedals are NOT suit for bike which has a single piece crank with the screw thread of 1/2" outer diameter. ② Our pedals are SUIT for bike which has 3 pieces crank ( for most bikes) with the screw thread of 9/16" outer diameter.



Specification :

Material: Aluminum alloy Weight: 0.8lb Screw Thread: 9/16”

Size: 4.6x3.8x1.0 inches



Package Includes:

1 pair of bicycle pedals

• Mountain Bike Pedals,simple and rounded double-sided anti-slip pins provides excellent grip, greater stability and wonderful control, and makes you riding with safety and comfortable without rubbing you legs.
• Bicycle pedals,fully sealed bearings combined with high-strength aluminum alloy design which is durable, lightweight and wear-resistant, it also prevents water and dust from accumulating on the spindle. Let you have a light and fast riding journey.
• Road bike pedals,they are suitable for most bicycles which come with the screw thread of 9/16" outer diameter. Size:4.6x3.8x1.0inches, Weight: 0.8lb/pair.
• BMX pedals,2 Reflectors per pedal improves cyclist’s safety with more eye-catching when riding in low-light conditions, makes your cycling safer and smoother.
• MTB pedals,you could clearly see the (L) & (R) marks on the pedals flat to help you install correctly. Great upgraded parts of your bike.

User questions & answers

Question:	How many pedals are there in the package, only one, or a pair
Answer:	The strap is 1 1/2 inches wide. The pad is 12 inches long and 2 3/4 inches wide and per Bob's reply is sewn to the strap.
Question:	Will these fit specialized mountain bike
Answer:	Our strap sponge is made of elastic macromolecular material, and we also add elastic cord design on the sponge. Under the protection of double tension, we increase the bearing capacity of our guitar strap to better protect your shoulder.If there is any problem during the use, please feel free to give us feedback. We will offer unconditional refund. --Asmuse Seller Team
Question:	Are these pedals medal or plastic
Answer:	Hi friend! Thanks for your question. This pick holder is sewn into the strap. To be honest, we haven't tried to remove it yet. Maybe it could be gently removed using tools such as scissors or blades. Please be careful not to get hurt. Hope this guitar strap can meet your satisfaction! --Asmuse Service Team
Question:	how do I determine if the crank threads are
Answer:	Hi, Asmuse support here! This Bass Strap Guitar Strap can hold 3 to 4 picks which a normal pick size.

• SMOOTH BEARINGS: Lubricated sealed bearing flat pedals features sturdy and stable, keep flat pedals spin smooth and without noise.The spindle was made of chrome-molybdenum steel material, which is stronger than ordinary steel and features better load-bearing performance. 
• GREAT GRIP: 12 aluminum ANTI-SKID nails in the surface for efficiency pedaling. This bike pedals prevent your shoes from sliding off when it is wet,and whatever position you place your feet that’s where they stay on. The extra studs and tools are also provided for replacement needs.
• BIG PLATFORM & LIGHTWEIGHT: This platform pedals weights only 422g (pair),102mm large platform pedals supports the foot more evenly when riding, provide more comfortable riding experience for you. Hollow design on the surface not only reduces the weight of the pedal but also reduce the wind resistance during riding.
• DURABLE & STURDY: High strength aluminum pedals fit for mountain bike pedals , road bike pedals, bmx pedals , exercise bike pedals, fixie bike pedals,folding bike pedals.
• EASY TO INSTALL: CR-L for left,CR-R for right. 9/16 sturdy spindle built to last. Great quality guarantee & limited one-year manufacturer's warranty included.

User questions & answers

Question:	I’m 6’, 265 lbs. will these hold the weight for trail and fitness riding
Answer:	There is no difference in the leather used in the 2" or 3" versions. However there is a natural variance in the leather color on every single strap. So sometimes they are a little darker brown and sometimes they are a little lighter brown. All are made from the same Whiskey Brown leather. Thank you!
Question:	Will these fit on a breezer squall sport 29er
Answer:	Hi, thanks for your message. Yes, zinz strap replacement is fixed extra-long padding, comparing with other unfixed padding, the pad will be stay centered on your shoulder all the time, do not worry about hurting from heavy bag.
Question:	What is the thread size for the grip studs? Looking to replace the hex studs with something with more grip
Answer:	I bought black, the color of my bag. Maybe the seller could answer that question?
Question:	Will these fit on my raleigh talus
Answer:	Yes

Product features

Sealed Bearing

Aluminum alloy pedals body and chromoly steel spindle make mountain bike pedals be more stable and higher strength

Anti-skid Studs

12 studs on each side prevent your shoes from sliding off and whatever position you place your feet that’s where they stay on.

Easy to install

CR-L for left,CR-R for right. Rubber washer prevent the water,dust or sand from entering to the pedals to avoid the noise.

Lightweight Pedals

Hollow design on the surface not only reduces the weight of the pedal but also reduce the wind resistance during riding.

• NON-SLIP PEDALS:Ball bearings system optimizing every your platform Pedal stroke,slide smoothly, High-strength aluminum alloy casting Body makes the bike pedals more durable
• WIDE PEDALS GOOD GRIPS:3.5*3.5*0.78 inches,Dual Sided road mountain bike platform Aluminum ANTI-SKID nails for efficiency pedaling.The platform pedals spindle was completed sealed to prevents water and dust from entering.
• Considering that a few bikes such as BMX use the 1/2" spindle, some customers may cannot mount the bike pedals because they did not notice the of 9/16" and 1/2". In order to avoid affecting your normal use, pls confirm the size of screw thread in your bike Crank Arm.
• UNIVERSAL BICYCLE PEDALS:Fit most of adult bikes. For MTB - Old School, Cruiser Bike, Folding Bicycle, Mountain Bike, Road Bike - Racing, Road Bike - Touring, Track Bike, Urban Bike - Fixed Gear
• Totally assured purchase and a full refund for any dissatisfaction. In case of having any question, please let us know. We will 100% refund and a lifetime warranty! Click the "Add to Cart" right now!

User questions & answers

Question:	Does it come with 1 or
Answer:	The strap is 2 1/2 inches wide
Question:	what are the threads on these? I tried them on my bike and my bike is a little smaller thread
Answer:	The strap is 2 1/2 inches wide
Question:	What thread are these
Answer:	It's really a personal preference. Our straps will slip over and then fit snug around the strap buttons. However, to ease your mind, strap locks can be used with our straps as well.
Question:	Does this come with a pedal wrench
Answer:	Thank you for your interest. These are handmade by skilled craftsman in one of the leather capitals of the world... Leon, Mexico.

Product description

Bike Pedal



The Bicycle Pedal is made of high-stress magnesium alloy, makes it durable and has a long service life.

The MTB Pedales designed with width Platform and Anti Skid Nail, more comfortable to step on and saving the driving power, which can let you riding easily without wasting effort.

Suitable for bike: such as mountain bike, road bike, BMX bikes, folding bikes, urban bikes, travel bikes etc.



Material: 5051 Magnesium Alloy Body

Weight: 0.348 kg/0.76 pounds

Pedal System: Flat Pedal

Bearings Mode: Sealed DU self-lubricating bearing

Screw Thread: 9/16" the diameter is 1.4cm

Replacement Anti-Skid Nail,provide great grip when riding.the pin can be replace with professional tools

"L" means left pedal and the "R "means right pedal.



Package:

1 pair bike pedals

• Made of magnesium alloy with high-stress makes the pedals durable to use
• Lightweight pedals with one pair weight only 0.76 pounds
• Mountain bike pedals size: 3.66 * 3.97 * 1.25 inch（93*101*32 mm）
• Anti-skid nail: increase the friction, provide a great pedals grips, prevent foot slipping off the pedals
• Suitable for: This flat pedals fit for BMX, cruisers bicycle, folding bikes,cyclo-cross bikes, road bicycles, MTB bicycle, mountain bicycles, junior bicycle, city bicycle

User questions & answers

Question:	What size thread is it for the bolt
Answer:	I think it is much better than the pvc jacket, i have both but i loved this nylon jacket guitar cable, more flexible and durable.
Question:	Could you a toe clip on these pedals
Answer:	This instrument cable is qualified and working perfectly in my guitar. It has double shielding, no extraneous hum or noise. Get one, you will be satisfied.
Question:	Will these fit on a peloton bike
Answer:	Sure, even i used in my electric guitar, but this cable has standard 1/4" plug interfaces. Bass guitar will not be a problem even other instruments like acoustic guitar, keyboard, speaker, etc. All would work fine.
Question:	What are the bearings in these pedals
Answer:	Yeah, it is, this cable signal transfer good and stability.

Product description

Specification:

Color: Black

Size:13.4cm*10.5cm*2.2cm

Bearings: quadruple

Weight: 380g (per pair)

 Material (axis): Cro-Mo steel

Material (body): aluminum alloy

 Construction: bicycle pedals

 Surface: anodizing technology

Thread Size: 9/16"

 

 Application: BMX, MTB, racing bike, city bike etc.

 

Properties:

 ✔ Large contact areas

the large pedal area offers more space for racing bikes.

 

✔ 4 rolling bodies reduce the frictional resistance.

There are 4 bearings in bicycle pedals. Compared to the usual 2 or 3 bearings, the rolling friction of the 4 bearings is relatively low, make the rotation of the ride smoother and improve the conversion efficiency.

 

 ✔ Non-slip design

The total on each pedal side supports the grip on the pedals.

Makes it easier to support the foot and helps you to ride more safely.

 

✔ Sealed Commuter Bearings - Save physical effort while cycling.

And the bearings are sealed to keep the dust out. Provide the best tread and simplify maintenance.

 

  Scope of delivery:

 1 pair of bicycle pedals

 

• 【Smoothly Design】Our road bike pedals build in 4 sealed bearings, more smooth and greatly improving your riding power. Full sealed bearing bicycle pedals protect spindles from water and dust, keep long lasting.
• 【Sturdy & Durable】This bicycle pedal are constructed from aluminium alloy body, made by waterproof materials corrosion resistance, the surface adapt anodizing process which ensure great durability and lasting performance.
• 【Anti-Skid Surface Design】18pcs anti-skid nails on each side of the platform keep feet firmly gripped to the pedals, you will be not worried about once had your feet slip even slightly, even under very wet conditions.
• 【Wide Platform Pedals】 Bicycle Platform Flat Pedals measure 5.19(L)*4.13(W)*0.39(H) inches, which conforms better to shoe soles. Big tread bicycle pedals make riding more comfortable.
• 【Universal Use】The cycling pedals use standard 9/16"screw thread. compatiable for most MTB (Mountain Bike).such as BMX,cruisers bicycle, road bicycles, MTB bicycle, mountain bicycles, junior bicycle city bicycle, etc.

User questions & answers

Question:	I can hardly turn the axle with my fingers . Is this normal
Answer:	The one that I have is only 110 volts. The last time I saw a 220 was when I was in Germany and my amp there could be changed to all sorts of voltages. Very convenient.
Question:	Do the pedals come w allen wrench to help install
Answer:	It can be used with a keyboard, but its meant for bass guitar.
Question:	Would these work on a mountain bike
Answer:	Yes, there will be a power cable included with the amp.
Question:	Are this pedals a good option for daily urban commuting
Answer:	Yes, it should work if your double bass has a 1/4" cable connection with your pickup system.

• SMOOTH AND NON-SLIP: Advanced 4 lubricated sealed bearing,anti-skid nails design for better grips
• STABLE:Aluminum Alloy material and Cr-Mo spindle possess durable composite pedals
• EASY INSTALLATION:L for left pedal, R for right pedal
• UNIVERSAL:Stardard 9/16 inch spindle,platform pedal for long ride comfortable and pedaling efficiency
• LIGHTWEIGHT: 0.82 pounds weight improve your riding experience,suitable for old school, cycle cross bike, dirt jumper, folding bike, mountain bike, road bike - touring, track bike, unicycle, urban bike - fixed gear

User questions & answers

Question:	Does it fit a trek marlin
Answer:	Good question. I couldn't find any info on them in english but the search references some korean online markets so my first guess is it's korean made my second guess it was made in corona virus country.
Question:	what is the weight limit for these
Answer:	The ones I got are 9/16 thread, for alloy cranks. The bmx bikes I'm familiar with have steel cranks, which would take 1/2 threads...
Question:	Is there an actual way to wrench these on and off or just do my best with the round stem
Answer:	I don’t know, mine were metric
Question:	Can the traction pins fall out
Answer:	One year warranty，you can have your money back if there is quality problem

Product features

RockBros Advanved 4 Bearings Mountain Bike Pedals

• Advanced 4 lubricated sealed bearing provides a smoother stroke while pedaling, Aluminium Alloy material and Cr-Mo spindle possess durable composite pedals
• Wide pedal platform for long ride comfortable and pedaling efficiency, Spindle Diameter: 9/16 inch,Suitable for a variety of bicycles and outdoor cycling
• Artistic design, unique shape,stylish pedals lighten cycling sports and great adaptability for your bike,fits for most kinds of bicycles

Advanced 4 Lubricated Sealed Bearing

The bearings of Our pedals made with Advanced 4 lubricated sealed bearings,makes it smoother while you pedaling and comfort riding on the road, Don't worry about any obstacles when biking

Antiskid Nails Design

There are 8 studs on the each side make your shoes grips better and effectively prevent your shoes from sliding off while being the easiest to get off of in the event of a crash.

Lightweight

Only 0.82 pounds weight improve your riding experience,suitable for old school, cycle cross bike, dirt jumper, folding bike, mountain bike, road bike - touring, track bike, unicycle, urban bike - fixed gear

• SEALED BEARING: 100% Cr-Mo spindle and efficient sealed bearings, durable and stable, keep bike pedals smooth without noise. Pedal body is made of CNC machined aluminum alloy, with 9/16 standard spindles, feature better load-bearing performance.
• GREAT GRIPS: 6 duarable threaded traction pins per side provide strong grips and will not scratch your shoes. This increases contact area with shoes for providing sufficient grip and control, make cycling safer.
• WIDE PLATFORM & LIGHTWEIGHT: This platform bike pedals weights only 334g(pair). 105mm wide pedals surface supports feet more evenly, provide more enjoyable riding experience, suitable as mountain pedals, road bike pedals, leisure bike pedals, etc.
• STURDY STRUCTURE: The mountain bike pedals is made of high-strength aluminum, which greatly extends the service life. Surface coated with anti-oxidation technology, it prevents oxidation and corrosion resistance, sturdy and durable than other normal pedals.
• EASY TO INSTALL: L for left, R for right. Standard 9/16’’ sturdy spindle built to last. Fits for BMX, MTB, Mountain Bike, Hybrid bike, Cruiser, Cycle Cross Bike, Dirt Jumper, Folding Bike, Road Bike- Touring, Trek Bike, Unicycle and other outdoor cycling.

User questions & answers

Question:	My left pedal fell off after 6 weeks. Is there some kind of warranty on these? I should not have to replace them every 6 weeks
Answer:	Yes they will. Got them on my yellow marlin 5 and love them.
Question:	Does it come with only 1 pedal for 1 side or it comes with 2 pedals for both sides
Answer:	It has standard connection. Should work.
Question:	Could be use it in a Trek Marlin
Answer:	I haven't actually taken one apart, but I used a pair for an entire season a year around through snow, sand, and mud with almost 4,000 miles on a fat bike doing roads, short track, trails, beaches, and gravel. I haven't had a single issue with them. I switched from egg beaters because I couldn't get unclipped fast enough in the snow.
Question:	can velcro straps be added
Answer:	We have these on a couple bikes with riders in size women 8 and men 10 and they are plenty big. I have 11 1/2 shoes and sometimes ride them with no trouble.

Product features

Waterproof Bicycle Pedals

Cycling will inevitably meet rain days, muddy and dusty roads. The flat bike pedal is waterproof, sealed to keep out water and dust, which helps you ride in rainy weather.

Bike pedal platform is large to fit most shoe size, and pedal surfaces with small pins help to keep your feet in place.

Suitible for Mountain Road bike

ROCK BROS flat bicycle pedals are made of high strength aluminium alloy, about 370g/0.82lb. Lightweight mountain bike pedals make your cycling more efficient.Pedal platform is quite large to fit most shoes size.

The bike pedals are exceptionally easy to install and use, great for most mountain bikes and road bikes, commuting bike, leisure bike, etc.

Standard 9/16''

Standard 9/16" spindle fits for most bikes. It will make sure to match bikes and avoid worrying about screw loosening.

CR-L & CR-R

Flat pedals have clear marks. CR-L for left pedal and CR-R for right pedal. Please look for the 'L' and 'R' mark for convenient installation.

Durable Threaded Pins

There are 12 hex-head threaded traction pins for providing enough grip and control. As traction pins are durable, you can ride more efficiently.

Fashionable design

The mtb flat pedals have a cool outlook. White stripes decoration, colorful choices make the mountain bike pedals no longer monotonous.

Product description

Feature:

1.The wind flows from each side when you are pedaling your mountain bike. This pedal is so lightweight that you could pedal it with less effort and ride quickly and smoothly in the wind

2.This pedal is made of aluminum alloy, which is lightweight, durable and will not add too much burden on your bike, along with high strength

3.The screw part at the end of the pedal allows you to add it on your bike easily and quickly

4.There are 8 nail-column anti-slip nails which are unreplaceable on each side of the pedal to provide adequate adhesion for your foot

5.The wide pedal surface provides strong tread performance and large touching area, enhancing the experience when riding the bike

6.The closed self-lubricating bearing features lubrication effect, making it rainproof, dust-proof and easy to maintain

7.Suitable for most of the mountain bikes, kids' bikes, road bicycles, BMX bikes, folding bicycles, touring bicycles, fixed gear bicycles, unicycles and o on

Specification:

Material:Aluminum Alloy Body,Chromium Molybdenum Steel Shaft

Type:Pedals - Flat/Platform

Color:Black

Size:123x100x18mm

Theme:Sports

Sport Type:Cycling

Use/For Bike Type:Mountain Bikes,Kids' Bikes,Road Bicycles,BMX,Folding Bicycle,Touring Bicycle,Fixed Gear Bicycle,Unicycle

Pedal Device Category:Pedal

Technics:Sanding

Packaged:Opp bag

Note:

Due to the screen difference, the color may be a little different from what you expect, please allow it

Packaged include:

1 pair of bike pedals

• Build to last: Fully sealed bearing bicycle pedals keep spindles from water and dust which ensure great durability and performance. Easy to maintain
• Wide Platform Pedals: Surface provides strong tread performance and offers an optimal surface area for long ride comfort and pedaling efficiency.
• Easy to install:The screw part at the end of the pedal allows you to add it on your bike easily and quickly.There are 8 nail-column anti-slip nails which are unreplaceable on each side of the pedal to provide adequate adhesion for your foot
• This pedal is made of aluminum alloy, which is lightweight, durable and will not add too much burden on your bike, along with high strength
• Universally: Suitable for commuting, recreational riding, BMX, cruisers bicycle, kids' bikes, road bicycles, MTB bicycle, mountain bicycles, junior bicycle, city bicycle, etc.