12 best pneumatic hoses

Product description

Class C weather, oil, and solvent resistant outer coating. Solid brass 1/4" NPT end fittings. Spiral synthetic yarn reinforcement. Max operating pressure: 250 PSI. Max burst pressure: 1070 PSI.

• Class C oil resistant EPDM rubber cover.
• Solid brass 1/4" NPT end fittings.
• Spiral synthetic yarn reinforcement.
• Country Of Origin : United States

User questions & answers

Question:	What country is this made in
Answer:	Not absolutely positive but Goodyear is an American company and should have been made in the United States. But I know that's not always the case. I've always found these hoses to be top quality for my construction business.
Question:	Are both ends male
Answer:	This Goodyear red rubber air hose has 1/4 inch male threads for connection on both ends.
Question:	Is the hose very flexible and easy to roll up
Answer:	No it's not flexible for manual rolling up. Yes if you have a reel but I don't so every time I need to coil it back up it sucks majorly. Is it durable sure but it's not easy to roll it back up! :)
Question:	I am looking for a hose that will withstand being outdoors (exposure to the sun). Does anyone of experience with this hose resistance to UV exposure
Answer:	You're really talking about material choice more than a specific product. Avoid PVC hose, avoid so called hybrid hoses that also have PVC. If your hose is stationary, you can choose one of many ways to shield it from UV/sun. If your hose is in motion outdoors you will probably prefer a polyurethane hose for the lighter weight. You can decrease UV damage rate of rubber hoses by coating them in silicone, which helps to seal them from oxygen to reduce the degradation rate, and if moving them around, reduces the abrasion rate, but may tend to increase surface grime buildup.

Product description

Flexzilla is a revolutionary hose featuring a Flexible Hybrid Polymer material that redefines flexibility. This engineered polymer-blend material permits use in environments where general purpose PVC and rubber hose may become too stiff. Flexzilla hose characteristics offer zero memory allowing it to lay flat. It won’t work against you during operation and coils easily after use. Flexzilla offers extreme all-weather flexibility, even in subzero conditions, and is ideal in both hot and cold environments where tight radius bends are needed.

• EXTREMELY FLEXIBLE - All weather flexibility (-40 Degree to 140 Degree F)
• EXTREMELY DURABLE - Abrasion resistant outer cover and crush resistant aircraft aluminum fittings with bend restrictor
• HYBRID POLYMER - Won't kink under pressure, coils easily and lays flat with zero memory
• MAXIMUM WORKING PRESSURE - 300 pounds per square inch
• VERSATILITY - Use on professional jobsites, in automotive shops or at home in the garage

User questions & answers

Question:	The picture shows 3 50ft hoses do you get 3 or just 1 50ft hose
Answer:	Just one hose. I do like this hose better than the ones I had before. It doesn't kink or stay curled up.
Question:	how do i exchnge for the warranty? i haveone with the black end blown off after purchasing it in August of
Answer:	Hello, We are sorry to hear the end of your hose has come off. Please contact our warranty department at 800-645-8258 X 121 and we will work with you to process the warranty. Thank you, Team Flexzilla
Question:	Does this 3/8 50' hose come with brass end fittings
Answer:	No. The fittings are sold separately. The hose has 3/8 non-metallic fittings to thread into a brass coupler.
Question:	What is typical way quick-connect plugs and adapters are installed on air hoses? Male on one end, female on the other? Sorry for the newbie question
Answer:	Typically, for a 3/8 inch air hose, there will be a 1/4" MNPT (male national pipe thread) nipple factory attached to each end of the hose. To add quick disconnects to the hose you will need a Quick Disconnect COUPLER (adapter), size 1/4 inch, with 1/4" FNPT (1/4" female national pipe thread) for the tool end of the hose. For the compressor end of the hose, if your compressor is equipped with a Quick Disconnect Coupler, you will only need a 1/4" size Quick Disconnect NIPPLE with 1/4" FNPT (1/4" female national pipe thread) for attaching to your air hose. If your compressor is not equipped with a Quick Disconnect you can simply attach the compressor end of the hose directly to the discharge port of your air compressor regulator. Depending on the size of the regulator discharge port, adapter bushings may be required to fit the 1/4" MNPT threading of the typical 3/8" air hose. In any case when you buy Quick Disconnect Couplers and Nipples always buy the same type and size. Quick Disconnect fittings are available in many different types and sizes. The INDUSTRIAL EXCHANGE type, and the UNIVERSAL EXCHANGE type are by far the most common types of Quick Disconnects. They are interchangeable with each other as well as with most other common types of Quick Disconnect fittings. I have never seen a portable air compressor factory equipped with a Quick Disconnect Coupler that did not accept both the Industrial Exchange, and the Universal Exchange type of Quick Disconnect Nipple in the 1/4 inch size. In this instance, 1/4 inch size is referring to the nominal size of the quick disconnect fitting, NOT the pipe thread size of the fitting.

Product features

Flexzilla Air Hose

Flexzilla is a revolutionary hose featuring a Flexible Hybrid Polymer material that redefines flexibility. This engineered polymer-blend material permits use in environments where general purpose PVC and rubber hose may become too stiff. Flexzilla hose characteristics offer zero memory allowing it to lay flat. It won’t work against you during operation and coils easily after use. Flexzilla offers extreme all-weather flexibility, even in subzero conditions.

Flexible Hybrid Polymer Air Hose

Flexzilla Air Hose has zero memory so it lays flat where you drop it. Its extreme all-weather flexibility is due to the Flexible Hybrid Polymer material that redefines flexibility. This hose won’t kink under pressure.

Extreme All-Weather Flexibility

While other hoses get stiff and brittle in cold temperatures, Flexzilla stays flexible even in subzero weather conditions.

Won’t Kink Under Pressure

Flexzilla Air Hose won’t kink under pressure! It is tangle free making work easier in the shop, around the house, and on the job!

Anodized aircraft aluminum ends

The fittings are made of anodized aircraft aluminum making them more durable and helps prolong the life of the hose.

Lightweight

Flexzilla is lighter than traditional air hoses making them easier to carry, lift and maneuver around the shop, and on the job site.

Durable

The super strong Flexible Hybrid Polymer material is durable and is engineered with an abrasion-resistant outer cover.

Product description

The Metabo HPT 115155M 1/4 in. X 50 ft. Polyurethane air hose with industrial fittings is designed to be used with a variety of air tools.



This hose is lighter than PVC hoses and remains flexible through various extreme weather. Metabo HPT (formerly known as Hitachi power tools) offers an extensive line of professional grade power tools and accessories for woodworking, metalworking, drilling and fastening, concrete drilling and cutting, outdoor power equipment products as well as a complete line of pneumatic nailers, staplers, compressors and collated fasteners.

• 1/4" Professional Polyurethane Air Hose
• LIGHTWEIGHT: 40% lighter than PVC and is spiral reinforced for increased durability
• STRENGTH: Handles 300 PSI with a 3-to-1 burst ratio
• DURABILITY: Bend restrictors add durability and stays flexible even in cold weather
• COMPRESSION RING: Has a crimped-on compression ring and comes equipped with a 6-ball brass fitting
• METABO HPT: Same tools. New name. Hitachi power tools has renamed to Metabo HPT

User questions & answers

Question:	What is the difference between the two models
Answer:	what two models? this only shows the one I bought. And it is a great hose for use. easy to work with, easy to wind back up and very flexible.
Question:	What is the difference between the two models
Answer:	there are not two models being shown here where we are being asked too answer your questions.

Product description

Flexeel Polyurethane Reinforced Hose is an excellent alternative to much bulkier rubber and plastic hoses. Extremely lightweight and tough, it's perfect for either outdoor contractor use or indoor industrial applications. Flexeel retains its flexibility even in cold environments. The integral construction of the hose eliminates the possibility of any separation between the inner tube, braiding and outer cover due to constant expansion and contraction during pulsing operations, such as with nail or staple guns. Assemblies include reusable brass MPT fittings with integral strain relief sleeves.

• Straight air (pneumatic) hose for use with air tools in indoor or outdoor applications
• Braided polyurethane for reinforced resistance to kinks and abrasions
• Male NPT ends for connecting to fittings, attachments, and air tools with female NPT end connectors
• Strain relief fittings preinstalled for reduced stress at connections
• 200 pounds per square inch (psi) for maximum working pressure at 70 degrees F

User questions & answers

Question:	is inner wall cleaned of Isocyanates (including amines and phosgenes) so hose can be used for beathing applications
Answer:	Thank you for your question. The Coilhose Pneumatics PFE60504TR Flexeel air hose is designed and engineered for pneumatic air transfer use only. This air hose is ideal for either construction or industrial use. We do not recommend it be used for any purpose other than its intended application. This air hose should not be used as part of a breathing devise or in a breathing application. If you require further assistance please call our customer service dept. at 800-526-2100 or email us at [email protected].
Question:	Does this hose have swivel connectors
Answer:	Thank you for your interest in our product. No, this hose has rigid fittings. If you require further assistance please call our customer service dept. at 800-526-2100 or email us at [email protected]
Question:	What is the OD of this hose
Answer:	OD is 3/8" (.375")
Question:	I am interested in a flexable hose to be used with small air tools. Most hoses are far too stiff. How would the flexibility of this hose be rated
Answer:	This is definitely a light weight air hose. It worked great when we roofed a shed. I think it is great for small air tools.

Product description

Class C weather, oil, and solvent resistant outer coating. Solid brass, 1/4" NPT end fittings. Spiral synthetic yarn reinforcement. Maximum operating pressure: 250 PSI. Maximum burst pressure: 1070 PSI. Temperature range: -40 to 190 degrees F.

• Class C weather, oil, and solvent resistant outer coating.
• Solid brass, 1/4" NPT end fittings.
• Spiral synthetic yarn reinforcement.
• Maximum operating pressure: 250 PSI.
• Made in USA

User questions & answers

Question:	I'm using bottled co2 and nitrogen, regulated of course. i'm concerned with leakage, mostly through fittings
Answer:	No. It's all stainless steel.
Question:	can this be used on porter cable pcf p02003 compressor
Answer:	The two options shows different handle shower head and overhead shower head.
Question:	Is this suitable for scuba applications (grade D
Answer:	35mm cartridge is the correct model. Thank you.
Question:	What’s the difference between the colors of all Goodyear’s hoses
Answer:	Please contact us by "Your Account"->"Your Orders"->"Problem with order" to require. We will solve your problem as soon as possible.

• PVC material is designed for long life and light weight for your DIY projects
• 17 pieces air tool accessories kit, include all necessary air tools and air fittings.
• Double 1/4" MNPT, Max working pressure of air compressor Hose is 300Psi
• Solid brass end fittings never corrod and seal better than aluminum, steel, or zinc
• Air accessories kit with air hose, Comes with a 2-years limited warranty

User questions & answers

Question:	Will this quick coupler fit my 3/8 goodyear air hose with 1/4 M style male plugs
Answer:	Yes, it will work. our air couplers and plug is also 1/4" I/M type.
Question:	Does this come with a quick connect for the hose? If not which quick connect fits this? Thanks in advance for your help
Answer:	Yes it does. You just have to assemble it yourself. Make sure you have pipe tape and adjustable wrench helps a lot. All parts are there. Works great
Question:	Are these made on the USA
Answer:	Unlikely. Just like your prescription drugs, cell phones, etc. Get over it.
Question:	is this hose safe for blowing out my sprinkler syatem
Answer:	yes, here is a great tutor to do it correctly : https://www.youtube.com/watch?v=Ole0Tgc-QAM

Product features

WYNNsky Air Accessory Kit

The Wynnsky 3/8"×25FT PVC Air Hose With 17 Piece Accessory Kit is ideal for general purpose applications. It features a lightweight, flexible, kink-resistant design. The PVC material is designed for long life and has a non-marring, abrasion-resistant cover. 300PSI maximum working pressure. Its bright florescent color reduces chances of tripping while on job site.

• 1pc- 3/8”x25ft PVC air hose
• 1pc-dual-foot tire chuck
• 1pc-tire gauge & air blow gun & blow gun safety nozzle
• 1pc-blow gun tapered nozzle
• 1pc-1/4” FNPT coupler & Female coupling
• 2pcs-1/4" FNPT industrial plug
• 4pcs-1/4" MNPT industrial plug
• 2pcs-Male coupling
• 2pc-inflation needles

WYNNsky Air Accessory Kit Features

• PVC material is designed for long life and light weight for your DIY projects
• 17 pieces air tool accessories kit, include all necessary air tools and air fittings
• Double 1/4" MNPT, Max Working Pressue of air compressor hose is 300PSI
• Solid brass end fittings never corrode and seal better than aluminum, steel, or zinc
• Air accessories kit with air hose

Product description

The Prime fit IK1016S-20 air accessory kit has all the most commonly used air compressor accessory items in one set, such as a 25-Foot recoil air hose. Included in the kit are all of the essentials like a blow gun with different nozzle attachments, quick connect couplers, quick connect plugs for a variety of tools, a dual air chuck for tire inflation, a tire gauge, sport ball inflation needles, PTFE sealant tape, air hose connection fittings and 25 ft. Recoil air hose. The prime fit IK1016S-20 air accessory kit comes with a 1-year limited . PRIME fit and its affiliated companies have been one of the leading global manufacturers of pneumatic tools, air accessories and air hoses since 1976. Prime fit produces a broad range of industry leading products serving the consumer, automotive, commercial and Job-site pneumatic markets.

• Includes (19) essential air accessories and a 25-foot recoil air hose
• Blow gun with inflation nozzles and sport ball inflation needles
• 2) heavy duty brass quick couplers
• Ideal starter kit for any air compressor system
• Comes with a 1-year limited

User questions & answers

Question:	What part screws into the sports needle
Answer:	Use the nozzle you use to pump up a tire. You just press the need in the end and hold it to pump up a ball.
Question:	Does this fit dewalt d55146 compressor
Answer:	most likely w/ the multiple Attachments that it Comes with.
Question:	What is the inside diameter of hose
Answer:	Since it has the brass attachments fixed on each end, I wouldn't even know how to measure it without cutting one end off.
Question:	Does this have a presta bicycle adapter
Answer:	I doubt that they are presta, but it does come with 2 needles and an adapter. Hope this helps.

Product features

IK1016S-20 Air Accessory Kit with 25-Foot Recoil Air Hose

The Prime fit IK1016S-20 Air Accessory Kit has all the most commonly used air compressor accessory items in one set. This kit is perfect for all basic air power uses around your home and shop from filling tires to running power tools and machinery.

Included in the kit are all of the essentials like a blow gun with different nozzle attachments, quick connect couplers, quick connect plugs for a variety of tools, a dual air chuck for tire inflation, a tire gauge, sport ball inflation needles, PTFE sealant tape, air hose connection fittings and 25 ft. recoil air hose.

Product description

The Estwing E1450PVCR 1/4" x 50' PVC / Rubber Hybrid Air Hose with Fittings is constructed of hybrid materials, giving you the strength and flexibility of rubber with the light weight of PVC. Pliable in even sub-zero temperatures, the hose lies flat or coils up nicely at the end of the day. All weather flexibility lets you work anywhere from -40 degrees F to 164 degrees F. Bend resistors prevent wear and tear at the joints, and a kink resistant design prolongs the life of the hose. The 1/4" industrial NPT fittings and universal coupler are made of solid brass for better performance and increased durability. Reaching up to 50' long, this hose delivers 300 PSI for maximum working pressure. The rubber coating protects it from wear and tear, and is tough enough that you don't have to worry about damage from snagging, dragging it over abrasive surfaces, or rolling over it. This air hose is oil, electrical, and chemical resistant, making it perfect for any workspace. The 1/4" x 50' PVC / Rubber Hybrid Air Hose with Fittings is suitable for any professional construction contractor at the job site or DIYer at home, and is high-performing in both indoor and outdoor applications. This air hose is part of Estwing's professional line of pneumatic tools.

• Strength and Flexibility: This 1/4" x 50' air hose is made of blended rubber and PVC for maximum strength and flexibility. It's kink-resistant and lightweight, delivering up to 300 PSI for maximum working pressure. Suitable for professional contractors or home DIY.
• All Weather: This hose is constructed from hybrid materials and remains pliable even in sub-zero temperatures, with solid brass couplers and fittings. Bend resistors prevent wear and tear at the joints, and a kink-resistant design prolongs the life of the hose.
• The Right Tool for the Job: We're committed to providing outstanding value, top tier customer service and long lasting, high quality products. We make nailers and staplers for every purpose, from roofing to siding to flooring and everything in between.
• Quality and Durability: We manufacture tools with the most durable materials under strict quality control guidelines, suitable for professional contractors and do-it-yourselfers alike. Our tools are sold, distributed, serviced, and warrantied in the USA.
• Tough and Dependable: We make an array of durable construction tools and accessories, including staplers and nailers for siding, flooring, framing, finish, and roofing. Compare our products to similar items by Makita, Hitachi, Bostitch, Senco, Paslode, and Dewalt.

User questions & answers

Question:	What size hose is this? 1/4 or
Answer:	It’s very fast if you let it go so for safety I walk it to the reel .
Question:	Does this specific Estwing 1/4” hose come in 25’ lengths
Answer:	Mounts on back side with a swival hinge
Question:	is this hose inside measurement a 1/4 inch. it keep on saying i/4 inch but inside or outside
Answer:	For starters, the seller would be the one to answer your question regarding the guarantee. I've had mine mounted to the wall for almost 2 years and use it all the time with no issues. The way I went about it was to mount the bracket using all 4 bolts to a piece of one by wood and then mount the board to a wall stud. This way I wasn't mounting the bracket directly over sheetrock. This bracket is plastic allright but it is thick so when all 4 fasteners are used, it should easily support the reel indefinitely. This reel pays out the hose very smoothly so there's no extreme strain on the reel or the bracket.
Question:	Does the male end fitting unscrew to permit another adapter for airing tires
Answer:	Yes these are 1/4" standard size.

Product features

Strong, sturdy and all-weather

The Estwing E1450PVCR 50 ft. long Rubber Hybrid Air Hose is made of hybrid materials, that makes it sturdy. Apart from this, the materials give it the flexibility of rubber and light weight of PVC. Reaching up to, this hose delivers 300 PSI for maximum working pressure. One of the best feature of the air hose pipe is that it is all-weather which means it can be used in a temperature ranging from -40 degree F to 164 degrees F. Additionally, the rubber coating and rugged construction, it doesn’t get damaged when dragged over uneven surfaces or oil or heat and a kink-resistant design prolongs the life of the hose.

Heavy duty Fittings

• EXCELLENT MATERIAL: This air hose is blended rubber and PVC air hose is heavy duty, lightweight, flexibility,abrasion resistance and all weather use.
• EASE TO USE: Equiped with 1/4” industrial NPT fittings and quick coupler for directly connect to air compressor and air tools. No need to buy seperately air fittings.
• BOTH ENDS INSTALLED BEND RESTRICTORS: Bend restrictors reduce kinking and help to increase the life of the air hose
• HIGH STRENGTH: 3/8 INCH inner diameter by 50 FEET long delivers up to 300 PSI for maximum working pressure, 1200 PSI bursting pressure.
• TWO YEAR limited warranty

User questions & answers

Question:	What type of quick coupler and plug on are installed on this air hose end
Answer:	Dear Customer， The type is 1/4" industrial quick coupler and plug with 1/4"-18NPT thread. Thank you.
Question:	Does this 3/8 50' air hose come with brass end fittings
Answer:	Dear Customer， Yes. This hybrid air hose has installed brass quick coupler and plug on hose end. Thank you.
Question:	Are the ends, without the couplers, brass
Answer:	This air hose equipped with both solid brass 1/4"-18NPT male fittings. One end installed a solid brass female plug, And the other end installed a solid brass female quick coupler. This help to connect to air compressor and air tools directly. No need to buy separately quick couplers and plugs.
Question:	What is the Warranty about this air compressor hosel
Answer:	We warranty this hybrid air hose for two years since the order date. Thank you.

Product features

YOTOO 3/8"x50' Hybrid Air Hose (Green)

YOTOO 3/8"x50' Hybrid Air Hose is ideal for garage, shop, industry, home and many other uses. The Rubber/PVC blend construction offers heavy duty, lightweight,flexibility,abrasion resistance. It is very good cold weather flexibility and coils easily for storage. Including double brass 1/4" MNPT fittings installed quick coupler and plug. The max pressure of the air hose is 300 psi. bursting pressure is 1200psi.Bend restrictors reduce kinking and help to increase the life of the air hose.

Installed Air Hose Fittings

Installed 1/4" quick coupler and plug for directly to connect air compressor and air tools. More easier and faster to use.

Installed Bend Restrictors

The bend restrictors to reduce kinking and to increase the life of the hose

Durability and Flexibility

Rubber/PVC blend construction offers heavy duty, lightweight,abrasion resistance. Flexible use at -40 to +150 degree F.

High Volume Air Flow for Widely Use

Connect this air hose to air compressor. It is suitable for air air wrench, air nailer, air spray gun, air blow gun and tire inflator gauge.

• ✅ 300 POUNDS PER SQUARE INCH - High performance Hybrid Air Hose 3/8" x 100ft with double brass 1/4" MNPT Fittings and heavy duty Bend Restrictors.
• ✅ EXTREMELY FLEXIBLE - All weather flexibility,temperature range of -40 to +150 degrees F, Maximum working pressure 300 psi, bursting pressure 1200 psi.
• ✅ WON'T KINK UNDER PRESSURE - Bend restrictors reduce kinks, knots and bends or crack under pressure for prolonged lifetime. Minimum bend radius is ideal in both hot and cold environments where tight radius bends are needed , Abrasion, oil and U.V. resistant cover.
• ✅ LIGHTWEIGHT & EXTREMELY DURABLE - Light weight hose features superior flexibility, no memory, and lay flat in cold temperature, the blend construction offers the best of both material, lighter in weight than rubber, more durable and flexible than PVC.
• ✅ VERSITILITY - Ideal for general purpose applications.Use on professional jobsites, in automotive shops or at home in the garage and industrial applications.

User questions & answers

Question:	what is the warranty on this product
Answer:	3 year warranty limited to manufacturing defects provided.
Question:	is 3/8" inside or outside measurement
Answer:	3/8" is inside diameter.
Question:	Is this more flexible than rubber hoses
Answer:	I don’t know about more flexible than rubber, but it will stiffen up some in the winter. I’m a roofer and you will most certainly not want to be dragging it around. It’s too big for to drag around or to flip around handily when it gets caught on something. It is ideal to use it as a source carrier and run a couple hoses from it. So with that being said, I don’t use it very often but when I do I appreciate it.
Question:	Is this item suitable for a water base chemical sprayer
Answer:	No, this is not for chemicals.

Product features

High Performance Hybrid Air Hose Great Features

• 3/8" x 100ft Hybrid air hose
• Double Brass 1/4" MNPT Fittings,and MAX working pressure 300psi
• Solid brass end fittings corrosion resistant and seal much better than aluminum,steel or zinc
• Heavy Duty Bend restrictors reduce kinking and help to increase the life of the air hose for prolonged lifetime and enhanced durability.
• Non-Kinking,Lightweight,Flexibility in extreme cold weather,excellent UV,Oil and Abrasion resistant.
• Ideal for use in home,shop,garage,and industrial applications.

Heavy Duty Bend Restrictors

• Heavy Duty Bend restrictors reduce kinking and help to increase the life of the air hose.
• Solid brass end fittings corrosion resistant and seal much better than aluminum,steel or zinc.

Lightweight

FIXSMITH yellow hybrid air hose is much lighter than traditional air hoses making them easier to carry,lift and maneuver around the shop,garage and on the job site.

Product description

1. OD 3/8” x25FT Air recoil hose with 1/4" Quick fittings, Black 2. Air tube stretches out to 25FT, display dimension: 11.8”x3.75” when not in use. 3. Working temprature: 32-120°F 4. MAX working pressure: 200 PSI (13.8 Bar); Burst pressure:600PSI (42 Bar)

• 1. OD 3/8” x25FT Air recoil hose with 1/4" Quick fittings, Black
• 2. Air tube stretches out to 25FT, display dimension: 11.8”x3.75” when not in use.
• 3. Working temprature: 32-120°F
• 4. MAX working pressure: 200 PSI (13.8 Bar); Burst pressure:600PSI (42 Bar)
• 5. Perfect to connect with air tool for air compressor

Product description

"This is the BEST air hose I've used in 35 years of building" ...

"You will throw all your old PVC & rubber hoses away" ...

"Absolutely a must-have air compressor accessory" ...

Over 35 Years of Experience in the Industry: The JACO Difference

Built tough for lifetime performance in the garage or shop by the leaders in precision pneumatic air compressor tools. Designed to withstand heavy duty use from our industry-first HybridFlex polymer blend that offers an ultra soft & lightweight feel w/ superior strength & all-weather, no-kink flexibilty that outperforms PVC and rubber air hoses.

Quick Specs:

- Length: 50 ft

- Diameter: 3/8 inch

- Fittings: Dual 1/4" M-NPT

- Rating: Max 300 PSI

Recommended Use: air compressor tools including tire inflator gauges, chucks, blow guns, impact wrenches, brail & trim nailers, ratchets, air hammers, saws, & more.

Why Choose The FlexPro?

- All-Weather Flexibility: won't kink or stiffen even in the coldest weather, providing all-day performance in the garage, shop, or job site.

- HybridFlex Technology: offers serious durability for the toughest jobs while providing an unmatched softness & lightweight feel that retains a true shape with zero memory.

- Military-Grade: dual aircraft-grade aluminum end fittings (1/4" M-NPT) offer an airtight fit to your air compressor accessories

- Ultra Versatile: longer 50 foot length ideal for countless jobs - auto maintenance, DIY, contracting, home improvement, etc.

- Built to Last: performance tested at our NIST certified facility & trusted by countless contractors, builders, mechanics, & home owners.

Proudly backed by our industry-best 100% Lifetime Warranty!

Order today while supplies last. Limited stock.

Sold exclusively by JACO

• BUILT TO LAST - engineered w/ our industry-first HybridFlex hybrid polymer blend, offering an ultra soft, lightweight feel w/ superior strength & all-weather flexibility that won't stiffen in the cold or kink up under pressure.
• 1/4" M-NPT FITTINGS - equipped with dual end fittings built from military-grade, aircraft-quality billet aluminum for airtight compatibility with your air compressor tools & accessories - including tire inflators, gauges, chucks, staple guns, nailers, air blowers, ratchet wrenches, sanders, saws, etc.
• ULTRA VERSATILE - w/ dual bend-restricting ends that reduce wear & tear, and longer 50 ft length provides optimal reach for the most demanding tasks - and won't kink or stiffen when the jobs done thanks to our exclusive TruFlex outer layer that helps retain a true shape w/ zero memory from start-to-finish, ensuring you won't need to fight the hose when moving around on-the-job.
• PERFORMANCE TESTED - engineered by the experts at JACO at our NIST certified industrial facility & designed for heavy duty performance for automotive & tire pressure maintenance, DIY projects, contracting work, home improvement, etc. Coils up easily after use for storage.
• 100% LIFETIME WARRANTY - feel the difference first-hand & upgrade your air compressor setup w/ the FlexPro by JACO. Discover why countless builders, contractors, home owners, & mechanics everywhere choose JACO when it comes to owning the best quality, high-performance air tools.

User questions & answers

Question:	Does this hose lay flat
Answer:	Yes, this hose has zero memory meaning it can lay flat without coil
Question:	Available in 100ft
Answer:	Not yet! Check back in 3 months :)
Question:	What standard NPT is the end fittings
Answer:	1/4"
Question:	Does the gray color rub off onto your hands or anything it comes into contact with
Answer:	No, haven't had any issues with the gray color rubbing off onto my hands or anything else.