11 best adjustable wrench with codes

Product description

Channellock 6WCB 6-Inch WideAzz Adjustable Wrench

From the Manufacturer

Channellock 6WCB WideAzz Adjustable Wrench with Code Blue Grips has an opening of over 1-1/2-Inch and 6-Inch overall length. It has the same capacity as a 10-Inch wrench. Longer jaws grip better, avoiding slippage or nut round off. Measurement scales (in. on front mm. on reverse) are handy for sizing nuts, pipe and tube diameters. Greater jaw capacity supports larger nuts and bolts and thinner jaws have greater access in tight spaces. Precise jaw design grips tight the first time, every time. Code Blue grips are designed for durability and comfort. Made in Spain to the highest quality standards of Channellock, Inc.

• Extra wide opening to 1-3/8"
• Longer jaws grip better, thinner jaws give greater access in tight spaces
• 4 thread knurl & non-protruding jaws provide greater capacity; minimal head width improves performance in confined spaces
• Precise jaw design grips tight the first time, every time
• Measurement scales (in. on front mm. on reverse) are handy for sizing nuts, pipe and tube diameters
• Chrome Vanadium steel construction
• Code Blue grips are designed for durability and comfort

User questions & answers

Question:	What is the minimum & maximum opening
Answer:	four feet even... I added a rolling file cabinet on the right side.
Question:	Does it close fully
Answer:	comes fully assembled, just had to take it out of the box and we were good to go.
Question:	How thick are the jaws? At the base and at the tip since it states they taper from base to tip
Answer:	27.5 inches
Question:	what is maximum opening
Answer:	There are no magnets present on the H38251 unit.

Product description

The Channel lock 808WCB, 8-Inch Adjustable Wrench, has perfectly parallel jaw surfaces that grip safely and reduce possibility of damage. Measurement scales (in. and mm) are handy for sizing nuts, pipe and tube diameters. Its non protruding jaw with thinner jaw profile permits easier use in more confined spaces. Its ergonomic handle is wider for a more comfortable grip. Made of Chrome Vanadium steel for durability and Code Blue Grips for comfort.

• Greater jaw capacity supports larger nuts and bolts
• Longer jaws grip better, Thinner jaws give greater access in tight spaces.
• Measurement scales (in. on front mm. on reverse) are handy for sizing nuts, pipe and tube diameters
• 4 thread knurl and non-protruding jaws provide greater capacity; minimal head width improves performance in confined spaces
• Code Blue grips are designed for durability and comfort

Product description

Adjustable Wrench, Jaw Capacity 1-1/2 In., Overall Length 8 In., Chrome Vanadium Steel, Chrome, Cushion Grip, Features Precision-Broached Jaws, Standards ANSI B107.8M, Meets/Exceeds ANSI Specification B107.8M

From the Manufacturer

The Channellock 8WCB WideAzz 8-Inch Adjustable Wrench with Code Blue grips has the same capacity as a 12-Inch wrench. Longer jaws grip better, avoiding slippage or nut round off. Measurement scales (in. on front mm. on reverse) are handy for sizing nuts, pipe and tube diameters. Greater jaw capacity supports larger nuts and bolts. Thinner jaws for greater access in tight spaces. Precise jaw design grips tight the first time, every time. Four thread knurl and non-protruding jaws provide greater capacity; minimal head width improves performance in confined spaces. Code Blue grips are designed for durability and comfort. Made in Spain to the highest quality standards of Channellock, Inc.

• Extra Wide opening to 1-1/2"
• Longer jaws grip better, Thinner jaws give greater access in tight spaces.
• 4 thread knurl and non-protruding jaws provide greater capacity; minimal head width improved performance in confined spaces
• Precise jaw design grips tight the first time, every time
• Measurement scales (in. on front mm. on reverse) are handy for sizing nuts, pipe and tube diameters
• Chrome Vanadium steel construction
• Code Blue grips are designed for durability and comfort

User questions & answers

Question:	what is the thickness of the wrench jaws? Not how wide, but how thick is it lying on its side. I need to open up a faucet but can't be thick
Answer:	The thickness tapers down towards the tips. Thus, it is 1/4" thick at the tip of the jaws, and 1/2" thick at the thickest point just above the worm gear.
Question:	Do you find the adjustment requires a consistent amount of force throughout the entire range? Or is it stiffer through part
Answer:	There is no slop in the gear drive like there can be on other C wrenches because of close tolerances.The adjustment is smooth and consistent.
Question:	Is the metal soft like some reviewers say - does it easily get dented
Answer:	Mine is very soft, and dented on the first use. I see others claim to have a different experience. In some cases, like plumbing, they may be using softer copper or brass fittings - a good match. In my case, I used it with steel bolt heads and saw denting. So the different opinions may be due to different usage. But it could also be a batch issue - perhaps early units were soft and later units made from harder material. But that said, I believe this Spanish-made wrench is not made by Channel-lock (privately labeled by someone else), so it has nothing in common with the other Channel-lock tools I own. Perhaps the review dates will show soft jaws on early units, but mine is only 5 months old. It does seem odd that so many people love it, yet several of us find it sub-standard. I like all my other channel-lock tools, so this one is out of the ordinary.
Question:	What is the country of origin
Answer:	According to the Manufacturer's description: Made in Spain to the highest quality standards of Channellock, Inc.

Product features

8WCB WideAzz 8-inch Adjustable Wrench

The CHANNELLOCK 8WCB WideAzz Adjustable Wrench has an endless amount of uses. Strong, reliable and versatile- it's exactly what America has come to expect from CHANNELLOCK.

Extra Wide opening to 1-1/2-inch

Same jaw capacity as a 12-inch wrench.

Tight Grip

Precise jaw design grips tight the first time, every time.

Jaw Design

Longer jaws grip better, Thinner jaws give greater access in tight spaces.

Four Thread Knurl

Four thread knurl and non-protruding jaws provide greater capacity; minimal head width improves performance in confined spaces.

Extra Wide Opening

Greater jaw capacity supports larger nuts and bolts.

Code Blue Grips

Designed for durability and comfort.

Product description

Channellock Xtra slim jaws are 40% thinner than a regular wrench of the same size and have an endless amount of uses. Strong, reliable and versatile - it's exactly what America has come to expect from Channellock. With Code Blue grips for durability and comfort.

• Xtra slim 3/16" Jaws
• Allows access to previously impossible to reach areas
• Extra wide opening
• Longer jaws grip better, thinner jaws give greater access in tight spaces
• 4 thread knurl & non-protruding jaws provide greater capacity; Minimal head width improved performance in confined spaces

User questions & answers

Question:	Could this be used to adjust auto sway bar end links? Need a very thin wrench to hold the nut. Would the jaws be long enough to reach and hold
Answer:	The maximum is 1 7/16 the minimum is closed
Question:	Anyone used this as a cone wrench for bicycles
Answer:	It does, yes - close enough to grab and hold a piece of paper (the metal does touch).
Question:	Does this wrench open to 1 3/4". I need it for a 1 5/8" nut
Answer:	I have 3 pair of these, and absolutely Love them!.... I measured mine, and they are .470" (12mm) at the base....and .250" (6.35mm) at the tip. Great for getting into tight areas for its narrow width and short length.
Question:	Made in the usa
Answer:	There's a little scale and an arrow marking out 1 and 3/8 inches (the opposite side marks out 34 millimeters), but it opens nearly an 1/8 inch wider for 1 and 1/2 inches.

Product features

6SWCB XTRA Slim Jaw WideAzz 6-inch Adjustable Wrench

The CHANNELLOCK 6WCB WideAzz Adjustable Wrench has an endless amount of uses. Strong, reliable and versatile- it's exactly what America has come to expect from CHANNELLOCK.

Extra Wide opening to 1.34-inch

Super wide opening lets you tackle big jobs with a compact wrench.

Xtra Slim Jaw Design

3/16-inch jaws mean maximum accessibility and a precise design grips tight the first time, every time.

40% Thinner Jaws

Xtra Slim 3/16-inch Jaws give greater access in tight spaces.

Four Thread Knurl

Four thread knurl & non-protruding jaws provide greater capacity; minimal head width improves performance in confined spaces.

Extra Wide Opening

Greater jaw capacity supports larger nuts and bolts.

Code Blue Grips

Designed for durability and comfort.

Product description

Adjustable Wrench, Jaw Capacity 1-1/2 In., Overall Length 12 In., Alloy Steel, Chrome, Cushion Grip, Features 4-Thread Knurl, Standards ANSI, Meets/Exceeds ANSI

From the Manufacturer

The Channellock 812WCB 12-Inch Adjustable Code Blue Wrench has longer jaws that grip better, avoiding slippage or nut round off. Measurement scales (in. on front mm. on reverse) are handy for sizing nuts, pipe and tube diameters. Greater jaw capacity supports larger nuts and bolts. Thinner jaws for greater access in tight spaces. Precise jaw design grips tight the first time, every time. Four thread knurl and non-protruding jaws provide greater capacity; minimal head width improves performance in confined spaces. Code Blue grips are designed for durability and comfort. Made in Spain to the highest quality standards of Channellock, Inc.

• Greater jaw capacity supports larger nuts and bolts
• Longer jaws grip better, Thinner jaws give greater access in tight spaces.
• Measurement scales (in. on front mm. on reverse) are handy for sizing nuts, pipe and tube diameters
• 4 thread knurl and non-protruding jaws provide greater capacity; minimal head width improves performance in confined spaces
• Code Blue grips are designed for durability and comfort

User questions & answers

Question:	what is the thickness of the jaws
Answer:	Made in Spain by the same company that makes adjustable wrenches for Snap-On, better then any US made one in my opinion.

Product features

A High Quality Adjustable Wrench

The Channellock 12 inch Adjustable Wrench comes with a 4 thread knurl and non-protruding jaws that provide greater capacity. It comes with measurement scales for easy sizing diameters, making it simple to adjust the jaw of the Channellock 12 inch Adjustable Wrench.

Portable and Convenient

If you want to carry along this wrench set by Channellock, you will be able to do so with ease as it is lightweight and the cushioned grip is ergonomic and comfortable to be used in various applications.

Product description

Adjustable Wrench Set, Number of Pieces 2, Jaw Capacity 15/16 In., 1-3/8 In., Overall Length 6-1/4 In., 10 In., Material Alloy Steel, Chrome Finish, Cushion Grip Handle, Standards ANSI

• Mpn: WS-2CB
• Country of manufacture: Spain
• Manufacturer: Channellock

User questions & answers

Question:	Does the blue stain over time
Answer:	The jaws where the FLAT bolt clasping surfaces exist taper uniformly from 0.351" at the tips to 0.570 at their widest part -- that is 1.225 inward from the tips. The taper of the head continues to 0.635 at full throat depth of the wrench. This depth is 1.460" thereby allowing the inner point of a hex nut to enter to that depth. The wrench will grip a 1-5/8 nut fully and will open to 1-11/16"
Question:	It says origin usa but the box says made in Spain which one is it
Answer:	The world has too many nuts and not enough wrenches. Some definition of "very thin" and "long enough" will help us to answer your question. Along with this wrench I also bought a slim/thin fixed size wrench to work on a particular nut.
Question:	How thick are the jaws of each wrench
Answer:	I don't work on bikes, but keep in mind that the slim version is still 3/16" thick, which is just over 4mm wide, I think. I don't think that is thin enough for your application. Also notice the thin cut doesn't extend all the way to the back of the wrench, so if you want a full engagement of the nut using the whole wrench opening, it probably won't work off the shelf.
Question:	Whats the guarantee
Answer:	No, the 6SWCB opens up to 1 3/8". The 8SWCB opens up to 1 5/8". Hope this helps.

Product features

Hardworking Tools For Everyday Tradesmen

Channellock, Inc. started making high quality hand tools back in 1886. 131 years later, we've never forgotten what got us here: a thorough attention to detail. We provide tools that don’t just finish the job, but defeat the job so you can get on to the next one—plain and simple. Is it the easiest way? Probably not. But to us, it's the Channellock way.

Model No. 806WCB

6" Code Blue Adjustable Wide Wrench

Model No. 810WCB

10" Code Blue Adjustable Wide Wrench

Code Blue Grips

Code Blue grips are designed for durability and comfort.

Measurement Scales

Measurement scales (in. on front mm. on reverse) are handy for sizing nuts, pipe and tube diameters.

Jaw Capacity

Greater jaw capacity supports larger nuts and bolts.

Adjustable

4-thread knurl & non-protruding jaws provide greater capacity; minimal head width improves performance in confined spaces.

Product description

Channellock Xtra slim jaws are 40% thinner than a regular wrench of the same size and have an endless amount of uses. Strong, reliable and versatile - it's exactly what America has come to expect from Channellock. With Code Blue handles for durability and comfort.

• Xtra slim 3/16" Jaws
• Allows access to previously impossible to reach areas
• Extra wide opening
• Longer jaws grip better, thinner jaws give greater access in tight spaces
• 4 thread knurl & non-protruding jaws provide greater capacity; Minimal head width improved performance in confined spaces

User questions & answers

Question:	what is the difference between this and regular one, I'm going to use it to remove and tighten the shower head. which one should I choose
Answer:	I have had 2 sets of these for a couple of years and the blue is pretty resilient to staining. I work with tools for a living and these are a great set of wrenches. Very well made. If your working with alot of oils im sure they will stain but otherwise they are pretty solid
Question:	how long is the actual handle on this
Answer:	Made in Spain. They are quality items, much better then the competition.
Question:	Are they SAE or metric
Answer:	Get the 8 inch wide azz ones. They are thin jaws that open real wide. I got these two also but they turn out to just be regular ones...
Question:	Anyone used this as a cone wrench for bicycles
Answer:	I don't know but they're the best adjustable wrenches I've ever owned. Try channel locks page for the guarantee.

Product features

8SWCB XTRA Slim Jaw WideAzz 8-inch Adjustable Wrench

CHANNELLOCK Xtra Slim Jaws are 40% thinner than a regular wrench of the same size and have an endless amount of uses. Strong, reliable and versatile – it’s exactly what America has come to expect from CHANNELLOCK

Extra Wide opening to 1-1/2-inch

Same jaw capacity as a 12-inch wrench.

Xtra Slim Jaw Design

3/16-inch jaws mean maximum accessibility and a precise design grips tight the first time, every time.

40% Thinner Jaws

Xtra Slim 3/16-inch Jaws give greater access in tight spaces.

Four Thread Knurl

Four thread knurl and non-protruding jaws provide greater capacity; minimal head width improves performance in confined spaces.

Extra Wide Opening

Greater jaw capacity supports larger nuts and bolts.

Code Blue Grips

Designed for durability and comfort.

Product description

Adjustable Wrench, Jaw Capacity 1-13/32 In., Overall Length 10 In., Alloy Steel, Chrome, Cushion Grip, Features 4-Thread Knurl, Standards ANSI, Meets/Exceeds ANSI

From the Manufacturer

The Channellock 810WCB 10-Inch Adjustable Code Blue Wrench has longer jaws that grip better, avoiding slippage or nut round off. Measurement scales (in. on front mm. on reverse) are handy for sizing nuts, pipe and tube diameters. Greater jaw capacity supports larger nuts and bolts. Thinner jaws for greater access in tight spaces. Precise jaw design grips tight the first time, every time. Four thread knurl and non-protruding jaws provide greater capacity; minimal head width improves performance in confined spaces. Code Blue grips are designed for durability and comfort. Made in Spain to the highest quality standards of Channellock, Inc.

• Greater jaw capacity supports larger nuts and bolts
• Longer jaws grip better, Thinner jaws give greater access in tight spaces.
• Measurement scales (in. on front mm. on reverse) are handy for sizing nuts, pipe and tube diameters
• 4 thread knurl and non-protruding jaws provide greater capacity; minimal head width improves performance in confined spaces
• Code Blue grips are designed for durability and comfort

User questions & answers

Question:	It says origin is usa are these in fact made in the usa or not
Answer:	Not sure exactly what you want measured, but from the moveable jaw to the end of the handle in 5 1/4". The blue rubber grip is 3 5/8"long.
Question:	How wide do the Jaws open
Answer:	Both. One side has SAE measurements (up to 1.5 inches) and the other side has it in metric. I don't have it on hand to say how long it goes but its how ever much mili and centi meters can fit in 1 and 1/2 inches. Hope this helps.
Question:	hi what material is the knurl made of. thank you in advance
Answer:	Hi. I have used it on a kid's bike to free up two nuts that were locked together on the axel. The thickness of the wrench is 3/16". Basically, ChannelLock took a standard wrench 3/8" thick and milled it down to half the normal thickness (3/16"). I plan or order one more for my other toolbox. Hope that helps.

Product description

CHANNELLOCK Adjustable Wrenches have and endless amount of uses. Strong, reliable and versatile-it's exactly what America has come to expect from CHANNELLOCK.

• Hand Tools
• Manufacturer: Channellock
• Made in: Spain

User questions & answers

Question:	can you take this wrench apart to clean it
Answer:	Made in Spain. All of the adjustable wrenches are made in Spain. The adjustable pliers are made in the USA.
Question:	What is the maximum jaw capacity on this wrench
Answer:	The 10 inch 810WCB opens to 1 3/8 inches. The shorter 8 inch 8WCB opens wider to 1 5/8 inches (graduations go to 1 1/2 inches). I do not believe the 810WCB is really a wide jaw even though the description calls it a wide wrench. It only opens slightly wider than some other brands. I could not find a wide opening version of the 10 inch wrench. The Channellock wrenches appear to better built than most other brands. They are made in Spain.
Question:	Country of origin says china, but the descriptions says made in usa. which is it
Answer:	I believe that it's Crome Moly
Question:	Is this wrench made in the USA
Answer:	The regular one will probably be better for the shower head. The wide-azz adjustable wrench is good for hard to reach places- like under a sink, etc.

Product description

Adjustable Wrench Set 4 pc 6", 8", 10",and 12" #133

• Adjustable Wrench Set 4 pc 6", 8", 10",and 12" #133
• Sizes 6", 8", 10", 12"
• Heat Treated Grip Handle
• Made of Vanadium Steel
• Double Dipped Rubber Handle

Product description

General length approx 10-inch,50mm/1.97-inch Black Adjustable Wrench, allows 55% wider opening than traditional wrenches ,super thin head(6mm/0.24inch) allows for use in limited and narrow spaces. it's only 0.47 inches thick at its thickest point(without handle)suitable for different environments. Ideal for plumbing, automotive , gas industries and tube nut disassembly.



Features:

1、Extra Wide opening to 50mm/1.97-inch,greater jaw capacity allows 55% wider opening than traditional wrenches.

2、Jaw depth(43mm/1.69inch) is 30% higher than general wrenches.

3、Super thin head(6mm/0.24inch) ,0.47 inches thick at its thickest point(without handle) allows for use in limited and narrow spaces.

4、Chrome Vanadium Alloy and heat treated, Black Oxide finish resists corrosion.



NOTES:

1、Do not use wrench with pneumatic and hammer tools.

2、Notice!!: Dear customer, In order to prevent rust and protect the metal surface, we will apply a proper amount of anti-rust oil on the surface of the wrench. The anti-rust oil is light yellow with a little smell. This is a normal phenomenon and does not affect the use. If you are very concerned about this, please do not buy it. Thank you for your continuous understanding and support.

• Awesome Wrench: General length approx 10-inch,at least 50mm/1.97-inch Adjustable Spanner, suitable for different environments. Ideal for plumbing, automotive, gas industries and tube nut disassembly
• Wide Jaw Opening: Extra Wide opening to 50mm/1.97-inch at least,greater jaw capacity allows 55% wider opening than traditional wrenches,supports larger nuts, bolts, and pipe.
• Longer Jaws and Thinner Jaws: Jaw depth(43mm/1.69inch) is 30% longer than general crescent wrenches. Longer jaws grip better, thinner jaws give greater access in tight spaces.
• High-Strength Materials: Chrome Vanadium Alloy and heat treated, Black Oxide finish resists corrosion, Polished head and regular.
• USER-FRIENDLY: Comfortable rubber grips are designed for durability and comfort. Wider handle provides more comfort and less stress to the hand.

User questions & answers

Question:	where is it made
Answer:	I just tried it because I was curious. There is a small set screw on the end of the worm. You can probably take the screw out to remove the worm, but there is a detent to keep the screw from coming all the way out. So not designed for removal, but you can probably do it with some grinding.
Question:	How many mm is it
Answer:	The wrench I received is only 1.18” which is upsetting because I was going off of the sellers answer to this question which was 1.5”
Question:	How thick or narrow is the jaw
Answer:	Look carefully an that 8 inch wrench; near the end of the handle it says "Spain". That is made by the Spanish firm "Urega", but branded to sell by Channellock. Urega makes excellent wrenches, very precise, strong, with size calibrations on the jaws. Amongst the best you can find.
Question:	what is the thickness of the wrench jaws? Not how wide, but how thick is it lying on its side
Answer:	I bought mine a few years ago. Made in Spain. Very very nice wrench. Bought one for work and another one for home.