11 best atd drive socket sets

Product description

This 71 piece 1/4 inch drive SAE and metric impact socket set includes: (10) SAE standard impact sockets, (10) SAE deep impact sockets, (14) metric standard impact sockets, (14) metric deep impact sockets, SAE universal impact sockets, (12) metric universal impact sockets, 1/4 inch female x 3/8 inch male impact adapter, 1/4 inch impact universal joint, 2 inch impact extension, 4 inch impact extension and 6 inch impact extension.

• Product type :AUTO ACCESSORY
• Package dimensions :30.48 cm L x37.846 cm W x4.064 cm H
• country of origin :Taiwan
• package weight :8.0lbs

User questions & answers

Question:	What is the country of origin and are these sockets laser marked, stamped, or both
Answer:	I would go with the 1/2 1822 model to break loose lug nuts.
Question:	What materials is made of cr-v or cr-moly
Answer:	First: ALL impact guns require some break-in, as the blades in the pneumatic motor need to wear-in to the housing to seal properly. Keep using it until it is ready.Second small guns like this REQUIRE a lot of air; while the AVERAGE air consumption is low (about 5 SCFM), the air must be available instantly to each and every other blade in the motor, thus demanding very large INSTANTANEOUS FLOW, the hose needs to be at least a full 3/8" inside diameter. Beware that many Taiwan (or oriental) made hoses and hose reels use too small metric sized hoses: 8X12mm as a 3/8" "equivalent", but it is NOT! The closest is a rather larger 10X15mm hose that is harder to get. Don´t use ANY swivel and use only high flow couplings. The small air impact guns pack a punch, but only when fed with short and ample sized hoses and no fittings! Amclaussen.
Question:	Whats the biggest socket
Answer:	Yes. This unit is one of the most quiet impacts I've ever used when stored.

Product description

Fractional and Metric. 3/8" Ratchet, 3" and 6" Extensions. (14) 6-Point Standard MM Sockets (6-19mm). (10) 6-Point Deep MM Sockets (10-19mm). (11) 6-Point Standard SAE Sockets (1/4"-7/8"). 6-Point Deep SAE Sockets (3/8"-7/8"). Blow Molded Case. Weight: 11 pounds.

• Fractional and Metric; 3/8" Ratchet, 3" and 6" Extensions
• (14) 6-point Standard MM Sockets (6-19mm); 10, 6-point Deep MM Sockets (10-19mm)
• (11) 6-point Standard SAE Sockets (1/4"-7/8"); 9, 6-point Deep SAE Sockets (3/8"-7/8")
• Blow Molded Case
• Weight: 11 pounds

User questions & answers

Question:	Where is this set made
Answer:	China 1 yr warranty

Product description

Forged from the finest chrome molybdenum alloy steel-the best choice for strength and durability. This set contains 48 SAE and METRIC-Piece. Sockets are laser etched and roll stamped for lasting size recognition. Set features a heavy duty blow molded storage case and is fully guaranteed. Set includes: 3/16", 7/32", 1/4", 9/32", 5/16", 11/32", 3/8", 7/16", 1/2", 9/16", 3/16", 7/32", 1/4", 9/32", 5/16", 11/32", 3/8", 7/16", 1/2", 9/16", 4mm, 4.5mm, 5mm, 5.5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 4mm, 4.5mm, 5.5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12mm,13mm, 14mm, 15mm.

• LIFETIME WARRANTY WITH SUNEXPRESS: Get in the express lane with the industry’s leading warranty program and exchange warranted products directly with Sunex.
• CR-MO STEEL: Provides the strength and flexibility to handle high torque impact tools.
• RADIUS CORNER DESIGN: Reduces wear and increases torque on fasteners by placing force on fastener walls rather than fastener corners.
• CHAMFERED OPENING: Quickly aligns fastener to socket.
• DUAL SIZE MARKINGS: Laser etched and roll stamped markings to ensure permanent socket identification.
• HEAVY DUTY STORAGE CASE: Convenient impact socket transport and storage.
• MEETS ANSI STANDARDS: All sockets are rigorously tested, ensuring peak performance and durability.

User questions & answers

Question:	What's the difference between sockets used for impacts and hand tools? Can impact sockets like these be used on handtools like a ratchet safely
Answer:	I use the Milwaukee with a hog ring, It's a real pain to use my craftsman chrome sockets, they are loose on the hammer but hard to get off. The Sunex seem to stay on firmly with very little slop and are easy to remove, not sure why that is, but they are much better, I never touch my craftsman stuff anymore because with the right extension you can use an impact for everything. These were worth every penny.
Question:	Description says 42 sockets, last picture shows 40 and also in the description it shows 42 but also 40.. Missing the 8mm in standard and deep well
Answer:	Hello,Thank you for contacting CPO!WARRANTYSunex WarrantySunex® Tools Inc. Warrants to its customers that the company's Sunex® Tools branded products are free from defects in workmanship and materials.Sunex® Tools Inc. will repair or replace its Sunex® Tools branded products which fail to give satisfactory service due to defect in workmanship or materials, based upon the Terms and Conditions of the Warranty plans attributed to that specific product.This Warranty does not cover damage to equipment or tools arising from alteration, abuse, misuse, damage and does not cover any repairs or replacement made by anyone other than Sunex® Tools or its Authorized Service Centers.Return equipment or tools to Sunex® Tools or an Authorized Sunex® Warranty Center, SHIPPING PREPAID. Be certain to include your name, address and contact information, proof of purchase date, and a description of the suspected defect.The foregoing obligation is Sunex® Tools' sole liability under this or any implied warranty and under no circumstances shall Sunex® Tools be liable for any incidental or consequential damages.If you have any questions or concerns please do not hesitate to contact us directly at 1-800-714-0918.Sincerely,CPO CommerceCustomer Care 1-800-714-0918
Question:	Are the walls as thick as other impact grade sockets or are these thin enough to be called "thin walled sockets
Answer:	I ordered the lock pin style but received ball spring style instead.
Question:	Do these work well with guns that use hog ring vs ball type? i have a makita that i love but it is horrible with regular craftsman sockets
Answer:	Yes. We have a fleet of 30 triaxle trucks that we have extended each frame ourselves to max legal length. So not only do they survive maintenence, they survive pounding of setting and removing rusty cross members, suspensions, etc. The only sunex socket I have broken was a 3/4 drive 1 and 5/16 used for truck lugs. After 4 years of using an adapter to 1 inch with snap on 1 inch anvil gun it finally cracked, which is insane considering those guys throw 1000+ ft lb torque. I just wish they made chrome sockets so I wouldn't have to buy from snap on because idk how they do it but they make a great product for cheap.

Product description

Set Contains: 8-Piece Standard Length SAE 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4. 8-Piece Deep Length SAE 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4. 12-Piece standard Length Metric 8mm-19mm. 12-Piece Deep Metric 8mm-19mm. 3" Extension. Universal Joint.

• Packed in heavy duty blow molded case
• Package Dimensions: 38.1 L x 8.128 H x 27.94 W (centimeters)
• Made in China
• Package Weight : 9.9 pounds

User questions & answers

Question:	What kind of Garauntee does this company offer on the 'Advanced Tool Design Model ATD-4601' impact socket set? Where would you take the broken piece
Answer:	I don't know but I've used these sockets for over a year and they do fine. Personally I prefer 1/2" drive sockets for the big stuff that would require an impact but these are very solid 6 point sockets that do the job just fine.
Question:	Does the included universal Joint have good angle ability? And does it jam up? and how long is
Answer:	The universal joint isn't really any longer than a normal u joint for 3/8ths drive. It has maybe 25 degrees of motion off center, but will not bend far enough to bind like a standard u joint when you ask for to much angle.
Question:	Is there a plastic case included
Answer:	Yes. There is a red folding case included with labeled slots for each socket. I have had this set for almost 4 yeas and haven't broken any sockets. I used it for personal vehicle use. Mostly by hand but I have also used them on a 3/8 impact. Made my money back on my first brake job. Hope this was helpful.
Question:	Whats the warranty on this item? Any specific info about the warranty
Answer:	To tell the truth, I never checked. I bought these for home use so, I don't pay much attention to warranty for light duty use. For work it is a different story, I only use Snap On...

Product description

Premium S2 steel bits provide optimal strength and durability to unfasten intractable screws and bit ends are sized for precise fitting. Sockets are made of enduring chrome-vanadium. Set includes: 7-Piece 3/8-inch drive hex bit sockets (SAE): 1/8, 3/16, 7/32, 1/4, 9/32, 5/16, 3/8 inch. Storage and carrying case included.

• Full range Allen hex set: a complete set of extra-long SAE Allen and hex bit socket Set for home, construction and automotive use
• Tough at half the price: combination of high-grade S2 steel and chrome-vanadium alloy steel with a chrome-mirror polished finish
• More torque: extra-long shank provides more torque than the typical Allen set can provide
• Common SAE sizes: includes 3/8-inch drive socket sizes (1/8, 3/16, 7/32, 1/4, 9/32, 5/16, and 3/8 inch)
• Organizing case: set includes a hard plastic storage case

User questions & answers

Question:	What's holding these in the socket? Anyone have any issues with them falling apart
Answer:	The driver bits appear to be hot pressed into the socket base. This is a process where the socket is heated before press inserting the bit.As the socket base cools, it contracts around the bit. I looked for a round pin bore in the base, there is none. Keep researching though as I could be wrong.
Question:	Are there any max torque specs for these
Answer:	I've never seen any torque specs. All I can say is, I've had mine now for about three months using them every day in the placement and removal of dies and shears on our machinery. Have not had a fault with them yet.
Question:	Is there any kind of warranty on these
Answer:	I don't know, but in my opinion it was a good buy. I bought it to put a long arm quilting machlne together. We'll worth the money.
Question:	Is USA really the country of origin or is it just the product name
Answer:	Country of origin is not specified on the tool or box.

Product features

The Ultimate Extra Long Hex Bit Socket Set

Constructed from a premium S2 alloy steel that provides you a superior hardness that reduces any wear-outs and ensures that your bit sockets last through multiple usages.

Increased Torque Strength

Spend less time loosening tight fasteners Our high strength chrome vanadium steel socket provides superior torque for extra turning power and the beautiful chrome finish is resistant to any type of corrosion.

Precisely Machined Bits

Our precisely machined bits are accurate in size and include chamfered ends that smoothly fits into fasteners and protect both the bits and the fastener of any damaged edges.

Mirror Chrome Finish

Beautiful chrome finish socket is resistant to any type of corrosion making it easy to clean and lasts through normal wear and tear.

Easy Organization and Storage

Includes blow molded case so you can quickly store your socket bits in its perfect condition. The case has a slim profile so you can store it in your tool bag for quick transport between jobs.

Product description

Packed in a rugged plastic storage case. Assortment contains: (10) 5/32" x 3/16". (10) 3/8" x 3/8" Fine. (20) 5/16" x 3/8" Fine. (30) 5/16" x 3/8". (10) 3/8" x 3/8". (20) 5/16" x 1/2". (10) 1/8" x 3/16". (10) 3/16" x 1/4". (20) 1/4" x 1/4" Fine. (30) 1/4" x 1/4". (10) 3/8" x 1/2". (20) 1/4" x 3/8".

• Product Type :Fastener Drive Bit
• Package Dimensions :10.668 Cm L X 20.32 Cm W X 3.048 Cm H
• Country Of Origin :China
• Package Weight :1.0Lbs

Product description

Contains: 7mm, 8mmm, 9mm, 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm, and 19mm deep impact sockets.

• Packed in a heavy-duty, reusable plastic tray.

Product description

This is a complete star bit socket set for all applications. It Includes 6-lobe standard (17 pieces), 6-lobe tamper-resistant (17 pieces), 6-lobe star plus (12 pieces), 5-lobe tamper-resistant star plus (12 pieces) and external star bit (14 pieces) sockets.

• Bits are made from S2 steel to meet or exceed torque specifications
• Sockets are made from heat treated chrome vanadium steel for strength and durability
• These high quality star bit sockets are designed to be used with hand tools only
• The bit socket warranty is avoided if they are used with any type of impact tools

User questions & answers

Question:	Is the ATD 13772 set made in China or Taiwan
Answer:	No problem. Hope it was useful. I must say that these sockets may be made in Taiwan but they are just as high quality as other US made sets and these are complete. I use them regularly and they show very little wear. Feel free to ask me anything anytime. Good luck!
Question:	Does this incude the carrying case? Ebay listings and the ATD website show a case with the same part
Answer:	The ATD-13772 comes in a blo-molded case.Toolrage
Question:	is there a list of sizes for each bit in the set
Answer:	Yes. Each bit has a place, & the size is marked in the case.
Question:	Is there a warranty
Answer:	1 Yr. limited warranty

Product description

These high quality star bit sockets are designed to be used with hand tools only. The set includes T10 3/8 inch drive, T15 3/8 inch drive, T20 3/8 inch drive, T25 3/8 inch drive, T27 3/8 inch drive, T30 3/8 inch drive and T40 3/8 inch drive; extra long 6-lobe standard star bit socket.

• Bits are made from S2 steel to meet or exceed torque specifications
• Sockets are made from heat treated chrome vanadium steel for strength and durability
• 6-lobe standard star bit sockets with extra long 4-1/2 inch shank for easy access to tight areas
• The bit socket warranty is avoided if they are used with any type of impact tools

User questions & answers

Question:	Does this set come in a case
Answer:	My set came in a red hard plastic case that snaps closed. The case is 1.5 x 4.5 x 8 inches. The bits have there own slot but do not snap in, with the case closed the bits stay firmly in place.

Product description

The ATD 1200 44 piece socket set contains: (10) Standard SAE Sockets, Deep SAE Sockets, (13) Standard Metric Sockets, (10) Deep Metric Sockets, 45 tooth, Quick Release Ratchet, Extensions.

• Package Dimensions: 4.0 H x 12.0 L x 6.0 W (inches)
• Country of Origin : China
• Package Weight: 3.85 pounds
• Fit type: Universal Fit

Product description

The Sunex 2568 1/2” Drive Master Impact Socket Set includes SAE sizes from 3/8” to 1-1/2” in standard and deep lengths. This set also includes 4 impact extension and a universal joint. Each socket has been forged from Cr-Mo alloy steel, designed with radius corners, made with chamfered openings, and marked by both laser etching and roll stamping to ensure permanent socket identification. All of this ensures our sockets’ professional-level performance--conveniently stored in one heavy duty storage case. Meets ANSI Standards.

• LIFETIME WARRANTY WITH SUNEXPRESS: Get in the express lane with the industry’s leading warranty program and exchange warranted products directly with Sunex.
• CR-MO STEEL: Provides the strength and flexibility to handle high torque impact tools.
• RADIUS CORNER DESIGN: Reduces wear and increases torque on fasteners by placing force on fastener walls rather than fastener corners.
• CHAMFERED OPENING: Quickly aligns fastener to socket.
• DUAL SIZE MARKINGS: Laser etched and roll stamped markings to ensure permanent socket identification.
• HEAVY DUTY STORAGE CASE: Convenient impact socket transport and storage.
• MEETS ANSI STANDARDS: All sockets are rigorously tested, ensuring peak performance and durability.

User questions & answers

Question:	Why are the extension for metric only $7 more but the extensions with SAE are $20 more
Answer:	1.5 feet x 1.5 feet approx.
Question:	Are these thin walled? Will need to use them to remove valves from manifolds
Answer:	Seem to be very strong sockets, I don't think you could ever break one if used manually. I use them manually and with an air wrench, highly recommend. Great set.
Question:	Where do I find the serial number for warranty info
Answer:	Yes it is the shallow set.
Question:	What are the dimensions of the carrying case when closed
Answer:	14.4 x 3.5 x 6.8 inches