12 best sanding block for drywall

Product description

3M Large Area Drywall Sanding Sponge 9095DCNA, 4.875 in x 2.875 in x 1 in, Fine/ Medium. 3M Drywall Sanding Sponge is ideal for sanding drywall and plaster during spot repair. Two sanding grades on one sponge in a fine/medium combination. Sponge can be rinsed and reused.

From the Manufacturer

3M(TM) Drywall Sanding Sponge is ideal for sanding drywall and plaster during spot repair. Two sanding grades on one sponge in a fine/medium combination. Sponge can be rinsed and reused.

• Aluminum Oxide
• Dual Grit
• Use wet or dry
• Durable foam

User questions & answers

Question:	Can I scrub the rust on aluminum utensils
Answer:	It's really geared for finishing. It can be used to remove textured paint, but you'd be at it for a while
Question:	Can this be used to remove a textured paint application from a wall before repainting
Answer:	It does say fine/medium in the description..
Question:	Is it fine on one side and medium on the other side? or is it between fine/medium on both sides? both sides seem to be the same to me
Answer:	I do not know the grit gauge like 120, 180 etc, but it is pretty course. I took a chance and have been pleased. The grit is on four sides, the face and back for large areas and the narrow sides for tight areas, and works great for drywall surfacing after floating, easy to clean and reuse. It does not work well for wet sanding, clogs the pores. Hope this helps.
Question:	what is the grit? is it 2 sided, and if so, is the grit the same on both sides
Answer:	This is just a glaze breaker, not a boring tool. If your cylinder is scored very deep, then you will need it bored outand sized. Then match the piston to the cylinder size.

Product features

3M Large Area Drywall Sanding Sponge, Fine/Medium, 4.875-Inch by 2.875-Inch by 1-Inch, Black - 9095NA

3M Large Area Drywall Sanding Sponge 9095DCNA, 4.875 in x 2.875 in x 1 in, Fine/ Medium. 3M Drywall Sanding Sponge is ideal for sanding drywall and plaster during spot repair. Two sanding grades on one sponge in a fine/medium combination. Sponge can be rinsed and reused.

• Aluminum Oxide
• Dual Grit
• Use wet or dry
• Durable foam

Product description

The sanding spong easily fits into the palm of your hand and is ideal for sanding a variety of surfaces. Due to it's shape, consturction and controlled flexibility the standard four side sanding sponge block can operate in the most awkard places. High-quality brown corundum is an extremely tough, wedge shape grain, for high speed penetration of tough materials without excessive shedding or fracturing of the grain. Great for Wood, Metal, Drywall, and Paint Hi-Performance, particularly suited well for grinding high tensile strength materials as hard woods and alloy steels.

• 4 different grit includes: 60, 80, 120, 220. Coarse, Medium, Fine and superfine. Sanding sponge Size: 4 x 2.8 x 1 inch.
• Grit printed on the sanding sponge, easy to distinguish and use, no need to put all the sand blocks together to compare, at a glance.
• Washable and reusable sanding block, can be used directly in water.
• The sanding sponge using high density sponges as base material, made from high-quality brown corundum with special treatment and special glue formula.
• Suitable for grinding any irregular geometric curved surface, wet or dry, portable and handy.

User questions & answers

Question:	Would this be good for sanding the shiny resin off from wood, so I could paint over the wood
Answer:	No, you can't replace the sandpaper on these sponges after the initial paper is worn out.
Question:	Is there a way to replace the sandpaper on these sponges after the initial paper is worn out
Answer:	Yes I think they would as long as there is not a lot of small detailing.
Question:	Would these be good to clean up old Baseboard? Lots of uneven paint blobs and inconsistencies i need to sand down, rather then removing the baseboard
Answer:	Includes 4 different grits：60-80 grit,120-180 grit,240-320 grit,400-600 grit.
Question:	What are the different grits included
Answer:	Why yes. Why not? Tis a sanding block. Thus will sand(scrub) off that there rust like sanding wood but sanding aluminum but then aluminum does not rust so can't be aluminum utensils you have there. But scrub with this here sanding block and all should look shiny and new. Good luck to you. Stay safe😷.... Social distance📏📏📏📏📏📏... Wash hands often🌊🙌⏳.. Don't touch face🚫🙊🙈.

Product description

Product Name:Sanding Sponge

Substrate: high density and high quality sponge

Material:Brown alumina

Grit:40/60/80/120



Product Feature



*Using high density sponges as base material, the resilience is excellent,

plasticity is strong, and it is not easy to tear.

*The design of the bevel edge is more conducive to polishing parts such as

corners and other polishing products which are not easy to operate.

*The Sanding Sponges are portable and handy, and suitable for polishing flat

and irregular surfaces.

*Can be used wet or dry.Because of its own water storage function, it can

reduce flushing and improve work efficiency.

*Planting sand on four sides can effectively improve the service life and reduce

the cost.

Scope of application



-Furniture woodenware industry can be polished, deburring, paint ect.

-Metal, automobile, aircraft, ship and other industries polishing, rust removal,

decontamination, paint ect

-Fine repair of stone and carving industry

-Plastic industry



Package included



2 x 40 Grit Sanding Sponge

2 x 60 Grit Sanding Sponge

2 x 80 Grit Sanding Sponge

2 x 120 Grit Sanding Sponge

• Use on wood, paint, metal, plastic or drywall.
• Planting sand on four sides can effectively improve the service life and reduce the cost.
• The Sanding Sponges are portable and handy, and suitable for polishing flat and irregular surfaces.
• Using high density sponges as base material, the resilience is excellent, plasticity is strong, and it is not easy to tear.
• Washable and reusable, can be used wet or dry,and also can be used directly in water.Because of its own water storage function, it can reduce flushing and improve work efficiency.

Product description

Product description



Product Name:Sanding Sponge

Substrate: high density and high quality sponge

Material:Brown alumina

Grit:Coarse/Medium/Fine/Superfine

Size:100mmx75mmx25mm



Product Feature



*Using high density sponges as base material, the resilience is excellent, plasticity is strong, and it is not easy to tear.

*The design of the bevel edge is more conducive to polishing parts such as corners and other polishing products which are not easy to operate.

*The Sanding Sponges are portable and handy, and suitable for polishing flat and irregular surfaces.

*Can be used wet or dry.Because of its own water storage function, it can reduce flushing and improve work efficiency.

*Planting sand on four sides can effectively improve the service life and reduce the cost.



Scope of application



-Furniture woodenware industry can be polished, deburring, paint ect.

-Metal, automobile, aircraft, ship and other industries polishing, rust removal, decontamination, paint ect

-Fine repair of stone and carving industry

-Plastic industry



Package included



2 x Coarse Grit Sanding Sponge

2 x Medium Grit Sanding Sponge

2 x Medium Grit Sanding Sponge

2 x Fine Grit Sanding Sponge

2 x Superfine Grit Sanding Sponge

2 x Superfine Grit Sanding Sponge

• Washable and reusable, can be used wet or dry,and also can be used directly in water.Because of its own water storage function, it can reduce flushing and improve work efficiency.
• 12 pieces in total in 6 different grade coarse, medium 1,medium 2, fine,superfine 1 and superfine 2 each grade sanding block has 2 pcs, different grades are available for you to choose.
• Using high density sponges as base material, the resilience is excellent, plasticity is strong, and it is not easy to tear.
• The Sanding Sponges are portable and handy, and suitable for polishing flat and irregular surfaces.
• Planting sand on four sides can effectively improve the service life and reduce the cost.Use on wood, paint, metal, plastic or drywall.

User questions & answers

Question:	What is the actual grit? I am mainly interested in the fine and superfine grits. I would prefer 1000 grit
Answer:	I would assume you could but only a few are fine enough grit. You would want all very fine grit for that and only a few of the 12 are fine.
Question:	can you use these to sand drywall seams
Answer:	I would recommend a sponge. This is more for taking the gunk off of metal or stainless steel. You may scratch the dish lol these are good!
Question:	Can you use it to wash dishes
Answer:	Here is what came in the assortment of sanding blocks I received: They were labeled as 60, 80, 100, 120, and 220 grit. I would say 60 was coarse, 80 &100 medium,100 fine, & 220 very fine. Hope this helps.
Question:	I need some fine 800 grit and superfine 1000 grit sponges. The description says fine and superfine, are they included
Answer:	dear,we have another set with blades,its thickness is about 1mm(0.04").

Product description

These Warner sanding blocks are perfect for quick touch-ups or light duty projects around the house. Easy to load with standard sandpaper.

From the Manufacturer

Introducing Warner Tool Products a family owned company – 85th Anniversary in 2012, (Est. 1927). Research Driven Innovation: Pioneered the Soft Grip Putty Knife Handle in 1992, (ProGrip),Originated the color coding of Putty Knife handles to identify the flexibility of the blade. (Patented), Developed Dura Cap TM – more comfortable light weight hammer head, Developed Dura Cap TM – more comfortable light weight hammer head. Warner greatly improves the Paint Tool Shopper Experience: Job Specific labels that aide the consumer with knife selection. The product sells itself! Warner means Quality and Value: For 90 years, Professionals and Consumers have trusted the Warner name for quality products that perform. Warner is an industry Leader in Product Design & Innovation: ProGrip Putty Knives with color coding flexibility, Carbide Paint Scrapers, Soft Grip Taping Knives, Drywall Stilts & Benches. Our Competition Follow Us!  As we continue our quest for innovation, Warner will provide the Amazon consumers with products that are at the envy of the market!

• Shaped to sand corners, curves, and flat surfaces
• Dimpled rubber surface to adjust for surface imperfections
• Easy-to-grip handle
• Easy to load with standard sandpaper

User questions & answers

Question:	thanks for the company info but I would really like to know some basic information about the sanding block like what size of sand paper I can use
Answer:	This sanding block arrived with sand paper attached that measured 4½ˣ5½.
Question:	Is this made in the USA
Answer:	I can’t find mine right now because it’s been a while since I used it nevertheless it did a great job and I was happy with the result. The product was made to last! I recommend it!
Question:	Does this come with a sheet of sandpaper, or does it need to be bought separately
Answer:	Yes has one sheet and you can replace with whatever grit you need. Beware this is a hard plastic block. I thought it was made of rubber and would have some give to it.
Question:	What size sheet of sandpaper is needed
Answer:	For the rubber one (not the hard plastic red-handled one), I tear 9x11” sheets of sandpaper into four 9x2.75” sheets. They fit into the holder perfectly — exactly the correct width and length.

Product description

3M Angle Sanding Sponge is 2.875 in x 4.875 in x 1 in. For large areas and detail sanding. 3M Sanding Sponges are designed for sanding on wood, paint, metal, plastic or drywall. This sponge features conventional 3M abrasives and is made with durable, flexible foam.

From the Manufacturer

3M(TM) Detail Area/Angled Drywall Sanding Sponge is ideal for sanding drywall and plaster during spot repair. When finished, simply rinse and reuse. Available in fine grade.

• Single Angle sponge allows detail sanding
• Rinse and reuse
• Use wet or dry
• For medium to large areas

User questions & answers

Question:	How many do you receive in the pkg
Answer:	If you pay for four, or the description says it's a 4 pack. As I recall I purchased 2 individual units.
Question:	Do you get 4 sanding sponges
Answer:	For rings in a toilet use a pumice stone

• Premium european high density foam - robust and durable foam sanding blocks for hand sanding
• Aluminum oxide abrasive wet sanding block in 4 different grits 60 80 120 220 - ideal for a broad range of uses from wood stripping to final finishing
• Multi-purpose sanding blocks for wood painting, metal working, drywall repair or preparation, scrubbing pots and pans
• Wet and dry sanding sponge assortment – use as drywall sanding sponge or sander block. Soak sanding sponge or sand paper brick for wet sanding to minimize dust.
• Emery board - 2 handy pieces for manicure and pedicure

Product features

S&F STEAD & FAST sanding sponges made with:

• Premium high density European foam
• Pre-wrapped with Aluminum Oxide sandpaper on four sides with grit size 60 80 120 180 220 320 (grit sizes vary according to the pack)

SPONGE GRIT GUIDE

-Coarse 60 grit: removal of previous finishes, stripping of wood

-Medium 80 – 120 grit: moderate surface finishing, primary sanding

-Fine 180 grit: light surface finishing

-Very Fine 220 grit: light sanding between coats

-Extra Fine 320 grit: between coats of paint and varnish

USEFUL ACCESSORIES - TACK CLOTH & EMERY BOARDS

Accessories vary according to the Pack

Tack Cloth

-Size 18” x 36”

-100 % soft cotton

-Gently wipe surface to remove all contaminants

-Achieve a fantastic finish

Emery Boards

-Double sided 180 240 grit

-Perfect for a quick manicure

USAGE

These flexible sanding blocks are perfect for wet and dry sanding both flat and contour surfaces. If wet sanding, use plenty of water and completely soak the sponge when it is clogged up to clear it of sanding residue. Wring well to leave it damp enough to sand while minimizing dust.

Wood Finishing

Burnt Pan Scrubbing

Drywall Sanding

4 PCS SANDING SPONGE SET

6 PCS SANDING SPONGE SET

10 PCS SANDING SPONGE SET

Product description

For either dry or wet sanding. Ideal for sanding wood, paint, plastic & drywall. Rinse & reuse. Grit-Fine. Extra large For either dry or wet sanding Ideal for sanding wood, paint, plastic & drywall Rinse & reuse Washable and reusable. Specifications Grade: Fine Grit: 120 Length: 8" Width: 2.87" Thickness: 1".

From the Manufacturer

For either dry or wet sanding. Ideal for sanding wood, paint, plastic and drywall. Rinse and reuse.

• Extra large single angle fine sanding sponge
• Flexible and convenient in use
• Ideal for dry or wet sanding of wood, paint, metal, plastic and drywall
• Its rinse and reusable flexible conformity is convenient for painters, cabinet makers and drywallers

• √ 4 pieces of extra fine sanding sponge (400 grit)
• √ Size: 4 x 1 x 2-3/4 inches (almost 100 x 25 x 70mm). Material: aluminium oxide + high density sponge
• √ Grit refers to the average particle diameter. The larger the grit, the smaller the particle size. The smaller the grit, the coarser the particles are. According to the degree of roughness, coarse->medium->fine->extra fine (80->180->240->400)
• √ Dry/wet sanding, NO deformation, NO rupture, NO shedding, washable, reusable. It can be widely used in cutting boards, knives, scissors, pots, kitchen ventilators, tools cleaning and rust removal
• √ To do a good job, must first sharpen his device. These tools will release you from troublesome work, let your life and work more easily

User questions & answers

Question:	can the coarse one remove paint from old furniture
Answer:	Didn’t polish. Sanded and applied gel stain
Question:	What can I polish with it
Answer:	Yes sir, it can be used both dry and wet.
Question:	will this work using wet
Answer:	Dear friend,our products are of high quality. Dry/wet sanding, no deformation, no rupture, no shedding, washable, reusable. It won't disappoint you.
Question:	Does this product perform well
Answer:	One

• Perfect for all Those Hard-To-Reach Spots: The Addicted DEPO wall sanding blocks set includes an angled sponge that will allow you to reach all those tricky corners and hard-toreach areas like a pro.
• Take all the Fuss Out of Sanding: These heavy-duty foam sanding pads are ideal for wet or dry sanding and can be used directly on water. As a result, you will be able to save your time and effort.
• Fine, Medium, or Superfine? We Got It: Our sanding blocks assortment includes 6 different grit washable and reusable sponges (60/80/100/150/180/220) for all your craft, DIY and construction needs.
• Work Smarter, Not Harder: Polish any wall, wood, metal, plastic, paint, drywall, stone or irregular, curved surface with our portable sanding pads, which are specially designed to endure any abuse.
• Product Size：3.95“x2.75"x1"

Product features

Type of Work:

60 GRIT - rough wood work.

80 GRIT - general wood work.

100 GRIT - general wood work, plaster patches, 1st smooth of old paint.

FINE

150/180 GRIT - hardwood preparation, final preparation of softwood, final preparation of old paint.

VERY FINE

220 GRIT - final sanding, sanding between coats, sand and marks not shown, dry sanding.

Product description

The Goldblatt Pro Hand Sander is specifically designed for comfort and durability for both professional woodworkers and DIYers. The reinforced die-cast aluminum construction ensures that this hand sander will stand the test of time in your woodshop or at home. One of the most important features for any hand sander is comfort, and the Goldblatt Pro Hand Sander is equipped with a durable, soft-grip handle to provide comfort while reducing fatigue. The screw clamp design is built not only to hold sandpaper sheets firmly to the sander but also to make changing abrasive sheets easy so you dont miss a beat. Sanding is an important part of any woodworking project, and this pro hand sander will help you achieve that perfect joint or seam. The Goldblatt Pro Hand Sander can be used for drywall work, finishing, and a variety of woodworking projects.

• PLATE SIZE & MATERIAL - Measures 9.5-inch x 3.1-inch. Made of hard aluminum, features with heavy duty foam for sanding cushion. Reinforced tempered aluminum plate for durability
• COMFORTABLE HANDLE - PP+TPR, cushioned rubber soft grip reduces fatigue and provides no-slip grip, easy for one-handed operation
• WING NUT DESIGN - Screw clamp design holds abrasive sheets firmly. Fits half sheet of standard sandpaper or use with die-cut
• HOW TO CHANGE THE SANDPAPER - Step 1: Unscrew the wing nut, open the clip. Step 2: Insert sanding sheet under clip and screw the wing nut. Step 3: Wrap sanding sheet around base and insert under second clip, then repeat step 2
• WIDE APPLICATION - For use with die-cut or a half sheet of standard sandpaper. Great for drywall sanding, flat surface of wood, metal, automotive, bathtub, furniture and so on

User questions & answers

Question:	what size sandpaper sheets work
Answer:	It might work - but it would need to be a large project as the base of the sander is large.
Question:	Does this sander had a foam backing behind the sandpaper
Answer:	I found the sander quicker than just a normal screen, primarily because the screen doesn't plug up and there is virtually no cleanup.
Question:	Description states product fits ½ sheet of standard sandpaper, but given dimensions, it couldn't. Dimensions imply ⅓ sheet - is that correct
Answer:	Yes! The Hyde 09165 is compatible with a regular shop vac.

Product description

3M Sanding Sponges are designed for wet or dry sanding on wood, paint, metal, plastic or drywall. Use this medium grit sponge for moderate stripping or surface leveling in preparation for a coating. This sponge features conventional 3M abrasives and is made with durable, flexible foam. The block shape makes it easy to hold and sands flat, contoured, or irregular surfaces. Sanding is an integral step in preparing a surface to receive a coating. For the best sanding results, sand with the grain of the surface and work through a sequence of grits, from course to very fine, skipping no more than one grit between each sanding step. 3M sanding sponges are available in medium, fine and extra fine grits.

From the Manufacturer

3M(TM) Sanding Sponges are designed for wet or dry sanding on wood, paint, metal, plastic or drywall. Use this medium-grit sponge for moderate stripping or surface leveling in preparation for a coating. This sponge features conventional 3M abrasives and is made with durable, flexible foam. The block shape makes it easy to hold and sands flat, contoured, or irregular surfaces. Sanding is an integral step in preparing a surface to receive a coating. For the best sanding results, sand with the grain of the surface and work through a sequence of grits, from coarse to very fine, skipping no more than one grit between each sanding step. 3M sanding sponges are available in medium, fine and extra fine grits.

• Handy value-pack of 6-sponges
• All-purpose sanding sponge
• Use wet or dry
• Washable and reusable
• Block shape for comfort

User questions & answers

Question:	Can this be used for toilet rings
Answer:	Of course it is and yes scratches is what it does....you sand at fine grits to get the scratches out.
Question:	Is it avaible to sanding metal, wood and plastic
Answer:	Thank you for asking. This is 3-3/4 in x 2-5/8 in x 1 in.
Question:	What are the dimensions of one block in inches
Answer:	I would compare it to 150 grit...yeah, it would be nice if they let you know somewhere on the package.
Question:	What is "medium" grit? Why can't they just label it 80/150/220 etc like regular sandpaper
Answer:	Hi its made in china

Product features

3M Sanding Sponge, Medium Grit, 6-Pack (CP002-6P-CC)

3M Sanding Sponges are designed for sanding wood, paint, metal, plastic or drywall. This sponge features conventional 3M abrasives and is made with durable, flexible foam. The block shape makes it easy to hold and sands flat, contoured, or irregular surfaces. Sanding is an integral step in preparing a surface to receive a coating. For sanding results, sand with the grain of the surface and work through a sequence of grits, from coarse to very fine, skipping no more than one grit between each sanding step.

• Available in multiple grits
• All purpose sanding sponge
• Rinse and Reuse
• Use wet or dry