11 best punch set

Product description

This Grip punch and chisel set comes with 16-pc. chrome vanadium punch and chisel set, 5-pc. pin punches, 5-pc. taper punch, 3-pc. cold chisel, 2-pc. center punch and chisel punch gauge. Also comes with 12-pc. high carbon steel set, 6-pc. cold chisel set, 4-pc. pin punch set and 2-pc. center punch. Complete with roll-up vinyl storage pouch. Chisels (qty.): 9, Storage Type: Tool roll, Pieces (qty.): 28, Letters: 0, Punches (qty.): 18

• Drop forged, heat treated, chrome vanadium steel
• Package Weight: 3.663 kilograms
• Package Dimensions: 4.055 L x 44.19 H x 13.21 W (centimeters)
• Included components: Chisels (qty.): 9, Storage Type: Tool roll, Pieces (qty.): 28, Letters: , Punches (qty.): 18

User questions & answers

Question:	what is the smallest chisel size (diameter
Answer:	To: Young Kim--It confused me at first, also, but I believe he meant, "Are they spring-loaded, so that you push down on it until it releases, leaving a small mark or, in the case of a chisel, it moves a set amount each time you pull and release the back half of the handle shaft?" And to that, no, they are not "automatic"; they are a simple punch and chisel set, as you've indicated: You hit the back end of the handle with a hammer (no heavier than about 16 oz., or smaller if you have one available for precision work (say, 6 or 8 oz.)).
Question:	What is the length of the longest piece
Answer:	They are made in China, as with most tools. They are of good Quality for China tools
Question:	What am I missing? Why are some of them painted green
Answer:	No the case does not close it is just a tray
Question:	Where are these tools made
Answer:	Considering gunsmith would be the most delicate use punches ever see, you could buy one 1/4 wooden dowel and sandpaper and it would hold up fine too lol

• Available in 16 different shapes and designs, including: bolt hole alignment, ball head separation, unfolding knuckle, center punch, knockout bolts and pins.
• Heat treated chromium vanadium provides a high hardness rating that prevents rapid expansion of the head and passivation of the chisel and punch.
• 5PC Tapered punch: 3/32" x 5-1/4", 1/8" x 5-3/4", 5/32" x 6", 3/16" x 6-1/4", 1 /4" x 6-3/4" and 3PC Cold Chisels: 3/8" x 5-1/2", 1/2" x 6", 5/8" x 6-1/2"
• 5PC Punch: 3/32" x 4-1/4", 1/8" x 4-3/4", 5/32" x 5", 3/16" x 5-1/4", 1/4" × 5-3/4" and 2PC Center punch: 1/8" x 5", 3/16" x 6"
• Product material: made of chrome vanadium steel, hardness: 54~58HRC

User questions & answers

Question:	Are these hardened
Answer:	There is no size chart available. I think an average High School Girl would wear the medium. I am so sorry I can not be more helpful. Just Her Sports
Question:	Where is this made
Answer:	These are regular gloves, if it was a pair of goalie gloves it would be identified in the product's description or name.
Question:	who make these
Answer:	That is the measurement from the tip of the middle finger to about mid forearm. 12" translates into size medium.
Question:	Can this be used for blacksmithing? Such as for punching holes through heated metal billets with a sledge hammer
Answer:	Thanks so much for your interest. We would suggest ordering a M and if it doesn't fit, no worries - we're happy to exchange!

• The high quality chrome-vanadium steel, These Pin Punches are heat treated, drop forged, hardened and knurled steel for greater durability, workability, and overall performance.
• Roll Pin Punch Set is a great set of tools designed to remove and re-use roll pins without causing major damage to the pins.
• 9pcs different size including 1/16”, 5/64”, 3/32”, 1/8”, 5/32”, 3/16”, 7/32”, 1/4”, 5/16”, This set is ideal for repairing or servicing guns, small equipment, machines, and vehicles.
• Fitted nylon storage pouch:This 9pcs roll pin punch set tool kit come with Black carrying bag, easy to use, carry, storage or hang this tool set
• 12 hours quick customer service, please do not hesitate to contact us if you have any question or advice, we are always looking forward to satisfying you.

User questions & answers

Question:	Are they magnetic
Answer:	That is not the case, tool can be used on hardened steel it will just become less effective quicker, remember a point is being used here and an indentation will be made.
Question:	Where this set are made
Answer:	No. Solid steel.
Question:	Ball tip punch vs. flat punch vs. hollow punch? I can see the difference of course... but which one for a standard looking roll pin in a firearm
Answer:	The length is 4" (from the Travers Tool team)
Question:	It says there is a 1/8" punch (which is 3.2 mm) but in the picture of the punches with dimensions in millimeters none are close to that. How come
Answer:	USA

Product features

Pack Includes:

1-pc. 1/16” X 2 3/4” Punch

1-pc. 5/64” X 3 1/4” Punch

1-pc. 3/32” X 3 1/2” Punch

1-pc. 1/8” X 4” Punch

1-pc. 5/32” X 4 1/2” Punch

1-pc. 3/16” X 4 3/4” Punch

1-pc. 7/32” X 5” Punch

1-pc. 1/4” X 5 1/2” Punch

1-pc. 5/16” X 6 1/4” Punch

Product description

3/32 to 1/2 by 1/64 plus 17/32 size. Heat treated and tempered. Includes Indexed stand.

• 3/32 To 1/2 By 1/64 Plus 17/32 Size. Heat Treated And Tempered
• Includes Indexed Stand
• On Purchase Our Product, You Are Getting The Highest Quality
• Package Weight: 2.995 Kilograms

User questions & answers

Question:	USA made
Answer:	yes
Question:	What is the size range from smallest to largest
Answer:	Yes. The package includes them.

Product description

Available in 16 different shapes and designs, including: bolt hole alignment, ball head separation, unfolding knuckle, center punch, knockout bolts and pins.

Heat treated chromium vanadium provides a high hardness rating that prevents rapid expansion of the head and passivation of the chisel and punch.

Product material: made of chrome vanadium steel, hardness: 54~58HRC

5PC Tapered punch: 3/32" x 5-1/4", 1/8" x 5-3/4", 5/32" x 6", 3/16" x 6-1/4", 1 /4" x 6-3/4"

3PC Cold Chisels: 3/8" x 5-1/2", 1/2" x 6", 5/8" x 6-1/2"

5PC Punch: 3/32" x 4-1/4", 1/8" x 4-3/4", 5/32" x 5", 3/16" x 5-1/4", 1/4" × 5-3/4"

2PC Center punch: 1/8" x 5", 3/16" x 6"

1 x Chisel Gauge For Maintenance

• Available in 16 different shapes and designs, including: bolt hole alignment, ball head separation, unfolding knuckle, center punch, knockout bolts and pins.
• Heat treated chromium vanadium provides a high hardness rating that prevents rapid expansion of the head and passivation of the chisel and punch.
• 5PC Tapered punch: 3/32" x 5-1/4", 1/8" x 5-3/4", 5/32" x 6", 3/16" x 6-1/4", 1 /4" x 6-3/4" and 3PC Cold Chisels: 3/8" x 5-1/2", 1/2" x 6", 5/8" x 6-1/2"
• 5PC Punch: 3/32" x 4-1/4", 1/8" x 4-3/4", 5/32" x 5", 3/16" x 5-1/4", 1/4" × 5-3/4" and 2PC Center punch: 1/8" x 5", 3/16" x 6"
• Product material: made of chrome vanadium steel, hardness: 54~58HRC

Product description

The Wheeler Hammer and Punch Set includes a polymer/brass combination hammer, eight precision brass punches, four steel punches and two plastic punches. It makes a great tool for driving pins, drifting sights, at the shooting range or on your workbench. Includes a convenient carry case that securely holds all components.

• DIMENSIONS: 9.75" L x 5.25" W x 2" D
• NON-DESTRUCTIVE: Chrome plated steel hammer has nylon and brass heads to ensure strong, but non-marring contact while in use
• BE PREPARED: Features brass, steel and nylon solid punches making it the ideal kit for your workbench
• INCLUDES: 1/8", 9/64", 5/32", 3/16", 7/32", 1/4", 9/32" and 5/16" brass punches, 1/16", 3/32" steel punches, 15/64", 3/8" plastic punches
• STORAGE: Comes with a convenient plastic molded storage case

User questions & answers

Question:	Where are these made
Answer:	That is an error
Question:	hi just got min looks like really high quality! going to add a side mounted laser on my PF9 but how do I know which punch to use steel brass or plas
Answer:	The holes are 9/32" diameters.
Question:	How do you know what punches to use, and what is a roll pin? new to this but thought I needed it cuz I'm getting more into doing things on my guns
Answer:	Mine arrived damaged. Under one little plastic square "clip" you could barely see that it had been severely bent, likely by a pair of plyers (there in the back--under a black plastic square thing. It won't even take one page, I guess, and it said it was inspected, I think. They said (accusingly) I ordered it from Amazon Warehouse so it was already damaged! You can see the damage if you look at the picture, then the little metal work on the back. I called Amazon, and because I don't have a printer, I will have to pay a dollar to get a return label, unless I can get one printed somewhere, probably for money, too. Burned up now, as I need to punch some holes for organizing papers and mail piling up! There is no kinkos here, either, in this town.
Question:	Of the Amazon reviewers that found this item unacceptable for use in building ARs, what punch pin set did you ultimately buy that worked well
Answer:	I just tried....and, yes it does cleanly cut thru one sheet of copy paper.

Product features

Hammer and Punch Set

The Wheeler Hammer and Punch Set includes a polymer/brass combination hammer, eight precision brass punches, four steel punches, and two plastic punches.

Precision Punch Set

With a variety of punches, this Wheeler set is ideal for driving pins, drifting sights, at the shooting range or on your workbench.

Dual Design

With two heads, the Wheeler 6oz hammer is designed for precise control. The steel head is best for metal punches while the brass head is ideal to prevent marring.

Product description

Use for fast and safe removal of pins. Drop forged, heat treated steel. Sizes - 1/16" x 2 3/4", 5/64" x 3 1/4", 3/32" x 3 1/2", 1/8" x 4", 5/32" x 4 1/2", 3/16" x 4 3/4", 7/32" x 5", 1/4" x 5 1/2", 5/16" x 6 1/4". Includes roll-up storage pouch.

• Use for fast and safe removal of pins.
• Drop forged, heat treated steel.

User questions & answers

Question:	How many punches does this item bring
Answer:	This is Nate from Tekton. The block is 9.7 inches long, 3 inches wide, and 1 inch tall.
Question:	In the description it says that these punches are used to remove roll pins. Are they also good for driving pins in? Especially for the first time
Answer:	This set is 100% USA made.
Question:	How long are they
Answer:	The 1/4 inch roll pin punch is the longest in my set measuring just under 7 1/4 inches long (7 7/32 to be exact).
Question:	will they work for steel (red hot
Answer:	It's easy. Go to their website and use the email/chat system to take a picture and send to them. They will replace them.

Product description

The high quality hardened 40# steel, These Pin Punches are heat treated, drop forged, hardened and knurled steel for greater durability, workability, and overall performance.

Roll Pin Punch Set is a great set of tools designed to remove and re-use roll pins without causing major damage to the pins.

8 pcs different size including 1/16”, 3/32”, 1/8”, 5/32”,3/16”, 7/32”, 1/4”, 5/16”, This set is ideal for repairing or servicing guns, small equipment, machines, and vehicles.

Fitted nylon storage pouch:This 8 pcs roll pin punch set tool kit come with Black carrying bag, easy to use, carry, storage or hang this tool set

• The high quality hardened 40# steel, These Pin Punches are heat treated, drop forged, hardened and knurled steel for greater durability, workability, and overall performance.
• Pin Punch Set is a great set of tools designed to remove and re-use roll pins without causing major damage to the pins.
• 8 pcs different size including 1/16”, 3/32”, 1/8”, 5/32”,3/16”, 7/32”, 1/4”, 5/16”, This set is ideal for repairing or servicing guns, small equipment, machines, and vehicles.
• Fitted nylon storage pouch:This 8 pcs roll pin punch set tool kit come with Black carrying bag, easy to use, carry, storage or hang this tool set
• 12 hours quick customer service, please do not hesitate to contact us if you have any question or advice, we are always looking forward to satisfying you.

User questions & answers

Question:	Are these starter punches? I bought your guys other set thinking it was a starter punch and it wasn't. I need too get a roll pin into my tube/gasblock
Answer:	5x7" frame will fit your 5x7" picture and have about 1/4" margin all around; margin also absorbs space for screw holes. 6x8" frame will function similarly, an so on.

Product features

Pack Includes:

1-pc. 1/16” Punch

1-pc. 3/32” Punch

1-pc. 1/8” Punch

1-pc. 5/32” Punch

1-pc. 3/16” Punch

1-pc. 7/32” Punch

1-pc. 1/4” Punch

1-pc. 5/16” Punch

Product description

gunsmith punch set

• Hammer: Our punch set gunsmith has been improved in two areas, the weight of the hammer and the surface area of the hammers faces. These two changes improve the user's comfort and work efficiency. In addition, to meet the needs of users for different hammer heads, both ends of the hammers can be removed and replaced. We provide hammer heads of four different materials, including rubber, brass, steel and nylon.
• Punches: Compared with other similar products, our gunsmith punch set has more types for a wider scope of applications to better meet the needs of consumers. We include punches made of brass, steel and plastic. We specially treat our pins for better durability and strength than competing products. We also use the correct material for each pin depending on its function. For example, for thinner pins, we use steel which has better strength and durability.
• Hollow-end Punches: We include a 4-piece hollow-end starter punch set including 1/16”, 5/64”, 3/32”, and 1/8” punches. They are made of 6140 chromium steel with nickel plating. This special material and processing technology make this brass punch set for gunsmithing superior to other similar products in durability, corrosion resistance and strength.
• Included in the Set: 1/8", 9/64", and 5/32" steel punches; 2 pieces 1/16" and 2 pieces 3/32" steel punches; 1/16", 5/64", 3/32", and 1/8" 6140 chrome vanadium steel punches; 3/16", 7/32", 1/4", 9/32" and 5/16" brass punches; 15/64 and 3/8" plastic punches; a hammer and 4 replaceable hammer heads.
• Customer Service: Due to the nature of this product, it is possible for some parts to eventually wear out through repeated use. We offer an exchange service to improve this situation. Also, if you have any problems with this punch kit, please feel free to contact us and we'll be glad to help you.

User questions & answers

Question:	What are the advantages of this punch set compared to other similar products
Answer:	I'm sorry. I got the 5x7 so I don't know about the 8x10.
Question:	If one of the punches fails, it reduces the value of the kit. In the worst case, this would make the set worthless. How do you address this problem
Answer:	It is 15 1/4 wide by 12 1/2 high
Question:	How many replacement parts does this hammer have
Answer:	Pick at a corner until it starts to come off then slowly pull across the entire edge. Pull slowly and evenly down the entire length of the frame. It usually comes off in one piece.
Question:	Will these punch pins bend easily
Answer:	That should work. This frame is beautiful. Screws are quite long. So there should be ample room to finish your project ...

Product features

Punch Set

Our gunsmithing punch set combines the advantages of similar products on the market while improving on their shortcomings. This makes it superior to other similar products in many aspects. Careful thinking and design goes into each part we manufacture. For example, increasing the weight of the hammer and having detachable hammer heads improves the user's experience. In addition, having a variety of materials and types of punches gives users more choices, increasing the practicality of this gunsmith tool kit.

Steel Hammer

The heavier the hammer, the better the user's experience (to a certain point, of course). To improve this, we increased the weight of the hammer and the area of the hammer faces. The main body of the hammer is made of steel, which has excellent durability. Our hammer head can be disassembled, and we include four replacement heads of different materials to choose from, so users can choose the right hammer head according to their needs.

7 Steel Punches

We include 5 different sizes of steel punches in the brass hammer set. Thinner pouches are naturally more likely to bend: To improve this, we use stronger steel to make our punches, and the pins are specially treated, so their durability and strength are better than other similar products.

5 Brass Punches

This punch set has five different models of brass punches to meet the needs of the most users. Brass is more durable than many other materials, so these gunsmith punches can be used for an extended time without being worn out.

2 Plastic Punches

This pin punch set has two different types of plastic punches. The punches made of plastic have good corrosion resistance and durability.

4 Hollow-end Starter Punches

This punch set has 2 models of hollow-end punches. They are made of 6140 chromium steel and are nickel-plated. This special material is superior to other common materials in terms of strength and durability.

Product description

9 pieces roll pin punch set is made of highly quality hardened 40# steel, drop forged, heat treated & knurled steel for extreme durability, workability.

Perfect tool for gunsmith, jewelers, watchmakers building, engineers, carpenters - use on guns, machinery, vehicles, woodwork and crafts, excellent tool for adding into your armorers wrench package

Pack Includes:

1-pc. 1/16” X 2 3/4” Punch

1-pc. 5/64” X 3 1/4” Punch

1-pc. 3/32” X 3 1/2” Punch

1-pc. 1/8” X 4” Punch

1-pc. 5/32” X 4 1/2” Punch

1-pc. 3/16” X 4 3/4” Punch

1-pc. 7/32” X 5” Punch

1-pc. 1/4” X 5 1/2” Punch

1-pc. 5/16” X 6 1/4” Punch

1-pc. Roll-up pin holder case

1 x Canvas Pouch

• 【Double Face Hammer】Chrome plated steel hammer has nylon and brass heads to ensure strong, but non-marring contact while in use.
• 【Brass】8Pcs roll pin punch including 1/8", 9/64", 5/32", 3/16", 7/32", 1/4", 9/32" and 5/16" ，Made of brass for use with surfaces that may be damaged by steel punches.
• 【Hollow End】4Pcs hollow end starter punch set including 1/16”, 5/64”, 3/32”, 1/8”,will cover all of the AR platform including trigger guard, gas block, and forward assist.
• 【Quality Steel】4Pcs steel punches including: 2 each of 1/16" and 3/32", after special treatment，pins are durable.
• 【Special Plastics】2Pcs sturdy plastic punches including 15/64", 3/8"，used special treatment of plastic, has higher hanroness ang higher density

User questions & answers

Question:	What is the country of origin please
Answer:	No they come in a box of six or 8 wrapped in plastic individually

Product features

Double Face Hammer

Chrome plated steel hammer has nylon and brass heads to ensure strong, but non-marring contact while in use.

Brass punch

8Pcs roll pin punch including 1/8", 9/64", 5/32", 3/16", 7/32", 1/4", 9/32" and 5/16" ，Made of brass for use with surfaces that may be damaged by steel punches.

Hollow End

4Pcs hollow end starter punch set including 1/16”, 5/64”, 3/32”, 1/8”,will cover all of the AR platform including trigger guard, gas block, and forward assist.

Quality Steel

4Pcs steel punches including: 2 each of 1/16" and 3/32", after special treatment，pins are durable.

Special Plastics

2Pcs sturdy plastic punches including 15/64", 3/8"，used special treatment of plastic, has higher hanroness ang higher density

Storage Box

All tools are neatly stored in the box, clean and tidy, easy to store and carry

Product description

Ideal for machine and vehicle repairs, the TEKTON 9-Piece Pin Punch Set smoothly drives out or inserts solid pins without damaging them. The punch tip is slightly wider than the rest of its shaft so that it won't get stuck in pin holes. Each tip is carefully machined to meet exact tolerances. This set contains 1/16, 3/32, 1/8, 5/32, 3/16, 7/32, 1/4, 5/16, and 3/8 inch pin punches. Made in USA.

• Includes 9-pc. pin punches: 1/16, 3/32, 1/8, 5/32, 3/16, 7/32, 1/4, 5/16, 3/8 in.
• Reverse-tapered to smoothly drive out or insert solid pins without sticking in workpiece
• Made from premium, high carbon steel
• Straight and true, tip is precisely machined to meet exacting tolerances
• Individual heat treatment allows careful control of tip hardness and temper of striking end
• Classic natural finish has a dry-touch, rust-preventative coating
• Made in USA

User questions & answers

Question:	Are these a better quality steel than the generic roll pin punches in the 8-14 dollar range
Answer:	Sign holder standoffs are made of high quality stainless steel material.... strong and durable, anti-rust, scratch proof, oil proof with a smooth and bright surface.
Question:	Que medidas tiene de longitud
Answer:	I don’t see why not