8 best penetrating oil stains

Product description

Golden Teak Oil, 32 Ounce

• Advanced tung oil polymers provide maximum protection for teak and other fine woods
• Contains UV absorbers to protect against sun damage, weathering and fading
• Easy to use, fast drying; ideal for boats, pools and wood furniture too
• Ultra-refined formula gives teak a natural, long lasting, warm golden color
• Made with pride in the USA

User questions & answers

Question:	How much product do you typically use for let's say a large outdoor dining table? I'm oiling my outdoor furniture for the first time. Thanks
Answer:	I am in the process of redoing a 5 piece dinning set. It's 4 chairs and a table. I ran out of both the oil and the cleaner/brightener. If yours is as large as mine I recommend using the 32oz or even larger. Could even get the gallon size for the oil if you need more than one coat like my set does.
Question:	Is this safe to use on an outdoor patio set made from Acacia wood, or does it have chemicals that will destroy the quality of the wood
Answer:	Star brite Teak Oil is ideal for acacia wood.
Question:	What's the differnce between this brand and the wadco brand for half the price
Answer:	I used both Watco and Star Brite on a set of 4 hairs teak chairs that were very weathered. I cleaned them all with the Star Brite clieaner first, which did a great job. My goal with the teak oil was to replace the natural oil that had leached out over the years. Without that oil, the wood absorbed rain water and was starting to split from the wet dry cycles. The Star Brit is thinner and really soaked in. 1 quart gave me 2 coats on one chair and a start on a second chair. My wife then got the Watco, so I used it on the rest of the chairs. Its much thicker and doesn't soak in nearly as much. One quart id 3 chairs. It colors the wood a lot more, which I didn't want. I wish I had used only Star Brite. It does a better job of penetrating deeply into the wood and truly reconditioning it. The Watco is more of a surface finish, giving quick, superficially pretty results. I don't think its nearly as good for rejuvenating severely weathered, dried wood. May it'g work best for preserving newer teak, but I wouldn't recommend it on old teak.
Question:	One of the comments mentioned the color "brown" Is this mostly clear or does the darken the wood too much? I will uses this on raw wood
Answer:	The oil has a brown color and since I put it on dark brown wood bench, I couldn't tell if coloring was a factor. I don't think it would change raw wood that much, unless it was a really light wood. Oil does soak in and that might make a slight difference.

Product features

Premium Golden Teak Oil

Star brite Premium Golden Teak Oil is the finest sealer/preserver/finish for marine teak and other fine woods. Star brite uses premium natural oils that are ultra-refined and chemically modified to form high molecular weight polymers that withstand long-term exposure to salt water and harsh weather. Star brite Premium Teak Oil is blended with high-tech additives to protect wood from the sun's damaging UV rays. The result is the ultimate treatment for maximum protection and beauty of teak surfaces. Ideal for use on all fine woods and wood furniture.

Directions

If wood is dirty and/or weathered, first treat it with Step 1 Star brite Premium Teak Cleaner and Step 2 Star brite Premium Teak Brightener. (See Below)

Apply Teak Oil to dry teak surfaces using a clean cloth, sponge or brush. Apply by working in the direction of wood grain to maximize penetration of oil into wood. Wait 5 minutes before wiping treated area with a clean cloth to remove excess oil.

Does Your Teak Need Cleaning Before Oiling?

If your teak is old, dirty or weathered, restore it first with Teak Cleaner.

It's easy and will leave your teak looking brand new.

Apply Solution

Wet the wood first, then simply apply Teak Cleaner. Spread evenly with a brush.

Lightly Scrub

Just lightly scrub with the grain using our Star brite Teak Scrub or a stiff brush.

Rinse Off With Water

Rinse off wood and that's it.

Now you have a brand new piece of wood ready for Teak Oil or Teak Sealer!

Product description

ORIGINAL PENOFIN BLUE LABEL PENETRATING OIL: ~ Penofin penetrating oil finish low-solid formula ensures easy application. This deeply penetrating oil hardens and stabilizes the wood fibers, yet allows the wood to remain flexible. Penofin does not leave lap marks. It is quick drying and will not crack, chip or peel! ~ Pigments penetrate into the wood protecting it from the inside out from the sun’s damaging rays. Penofin provides up to 90% ultraviolet protection. It adds a rich, transparent color to enhance the natural beauty of wood, highlighting the grain. ~ FEATURES: Formulated for any variety of wood. For use on exterior wood surfaces. Brazilian Rosewood Oil penetrates deeply. Hardens & protects individual wood fibers. Microscopically fine transparent transoxide pigments inhibit ultraviolet damage and darkening. They add deep, rich color without hiding the natural beauty of the grain. Pigments won't fade, turn chalky or wash off. No surface film to trap moisture/cause chipping. Coverage depends on application method, texture, and moisture content of wood. Coverage is less on rough surfaces, more on smooth surfaces. Average coverage is 175-300 sq. ft. per gallon. ~ ***** RESTRICTED: This product is EPA/DOT restricted from shipping to the following states: AK AZ CA CT DC DE HI IL IN MA MD ME NH NJ NY OH PA RI VA VT. All other states ship via GROUND transport only.

• RESTRICTED: Cannot ship to : AK AZ CA CT DC DE HI IL IN MA MD ME NH NJ NY OH PA RI VA VT
• Brazilian Rosewood Oil penetrates deeply - Hardens & protects individual wood fibers
• Transparent metallic oxides eliminate fading - Pigments won't fade, turn chalky or wash off
• No surface film to trap moisture/cause chipping
• Formulated for any variety of wood.

User questions & answers

Question:	Is this product available from you in “clear”? we have been using penofin clear the last few times and like the result
Answer:	If you are covering concrete stairs and using glue
Question:	Once this product is open, what is the shelf life? How long can I store it after open? Thanks
Answer:	Easy to clean...I’ve had for over 10 years in one garage and 2 years in another...looks great
Question:	Interested in using on mahogany. Would like to stain the wood a dark chocolate color. Will this allow me to achieve a dark tone
Answer:	This rubber is very durable and should be fine. I used it in a workout room and glued it down. Smelled like tires for about 3 months ;)
Question:	Can penofin oil be used on cedar
Answer:	This mat is thin but strong. I would say between 1/32 and 1/16 inch thick. That's an American measurement.
Question:	Does this have any coloring in it? Want to use on tigerwood so needing clear/transparent application. Thx
Answer:	Yea man, it does get really slick, especially when it is wet, cold and windy. I got this for a similar application, have sense ditched it and used large sheets of stuff that is like skate board grip tape. 3M makes it and it has a rubber backing and has a ton of grip, even in icy conditions
Question:	Which oil is best for batu? the red label is best from penofin for hardwood? and how often to apply? is oil better than stain for batu
Answer:	Foam squares? Not on my RV entryway. They would come apart and catch junk in the crevices.
Question:	What is the difference between the red label and this one? I’m using it on new barrel chairs that will be outside by our fire pit
Answer:	This style of rubber mat has been around for a very long time. Always thought it was tough material. Though this seems to be rather thin it might work, thinking about weight and hooves of the horse on this.
Question:	Would this product work on a stained mahogany deck
Answer:	Throw it down and use liquid rubber around the edges, I’ve been there man it’ll work in a pinch for a little while. I patched a leaking roof on a trailer I owned back in the day in a simular fashion. It held back water for a little over a year.
Question:	Can you ship this to san francisco, ca
Answer:	No it is not rubber backed.

Product description

Chomp! Pull It Out Concrete Oil Stain Remover is a deep penetrating formula that lifts, cleans and removes oil and grease stains on driveways, garage floors or even a parking area caused by drips from a car or truck. Because it is convenient and easy for anyone to use, this cleaning solution is great for both DIY and professional use. Pull It Out Concrete Oil Stain Remover provides exceptional oil and grease stain lifting from porous surfaces. The stain remover is effective on oils and petroleum-based stains (transmission fluid, brake fluid, etc.) commonly found on concrete and paver driveways, garage floors, parking areas, and drive-through lanes. Chomp! Pull It Out is simple and safe to use. Unlike other cleaners that feature potentially hazardous chemical compounds, like acid or bleach, the Pull It Out formula is largely free of these harmful substances, making it safer for use around your home or place of business. Chomp! Pull It Out Concrete Oil Stain Remover is a must-have addition to any home or workplace. Unsightly stains are not only ugly but may also detract from the overall value of your home or business. Pull It Out helps address this problem of oil spills and maintains the appearance and value of your home, garage, and driveway. The Chomp! Pull It Out formula is quick and easy to use. Simply pour the formula onto the stain using the easy-pour feature at the spout and allow it to dry. The formula dries in a consistency similar to chalk dust, and you can easily scrape it away to reveal your newly-cleaned and stain-free surface. Depending on the climate and humidity levels, the formula can take anywhere from a few hours to a full day to dry. Each bottle contains 32 fluid ounces. Bullet feature 1 (optional) : DEEP PENETRATING FORMULA: Chomp! Pull It Out Concrete Oil Stain Remover uses a deep penetrating formula to lift stains from porous flooring surfaces like concrete and brick. It is effective on oil or petroleum-based stains (transmission fluid, brake fluid, etc. ) commonly found on concrete and paver driveways, garage floors, parking lots, and drive-through lanes.

• INDUSTRY'S MOST POWERFUL OIL STAIN LIFTING FORMULA: Chomp! Pull It Out uses a deep penetrating formula to lift stains from porous flooring surfaces like concrete and brick. It is effective on oil or petroleum-based stains (transmission fluid, brake fluid, etc. ) commonly found on concrete and paver driveways, garage floors, parking lots, and drive-through lanes.
• SIMPLE & SAFE: Unlike other stain removers that use harmful chemical compounds to attack tough oil and grease stains, Pull It Out stain remover helps to address these problems safely and simply. Although it goes a long way in removing difficult stains from concrete and other porous surfaces, Pull It Out does not contain bleach, acid, or other potentially hazardous materials.
• EASY TO USE: This cleaning formula is convenient and easy to use. Simply pour a small amount of the formula onto any oil or petroleum-based stain to cover it and allow it to dry. As it dries, the Pull It Out formula draws out the contamination causing the stain. Once the cleaning formula is dry, you can easily brush it away like chalk dust, revealing a stain-free surface.
• VERSATILE FORMULA: Concrete make up varies widely and oil stains may require different cleaning techniques. Pull It Out utilizes a 'poultice' technology and is effective across the widest variety of concrete conditions and types.
• BETTER FOR YOUR HOME/BUSINESS: Oil stains on your driveway, garage floor, or other surfaces are not just detrimental to your home’s appearance. These stains can also hurt the value of your home or business. In order to help retain or even increase the value of your home, take care of these pesky stains with Chomp! Pull It Out Concrete Oil Stain Remover.

User questions & answers

Question:	Will this remove pet urine odor from concrete
Answer:	Did little to nothing on my concrete. I have unsealed concrete that has lots of vehicle traffic. A good high pressure washer did a same results as this product with same pressure washer. Does not do much at all.
Question:	Is this product harmful to plants
Answer:	Can't help you here Matty. I used it on my concrete apron's and sidewalks around the shop and it seemed to work great but I've never tried it against any other produce. I've always just used my pressure washer without any sort of additive and didn't notice any better or additional results to be perfectly honest with you. Would I purchase it again ?? Probably not considering the results. Hope this will help you out a little.
Question:	Will this clean stone stained with red clay
Answer:	Yes, it can be used for marble and natural stones
Question:	Can you use this for soot on the walls and if so which one
Answer:	After I remove the mold stain from my white wall, do I need to repaint it? The mold is gone, the wall is back to its original look, and we don't need to decorate.
Question:	What happens if this drys on the surface of the concrete
Answer:	I'm not sure, but it does remove the mold, I wiped it off when I came back from work after applying it and it was gone!
Question:	Can this be used to clean oil from asphalt
Answer:	It provides continuous protection and usually does not need to be reused unless the mold is heavy or the environment is particularly humid.
Question:	Will this product remove tire marks from driveway
Answer:	I wouldn’t use it for that....it’s a gel that clings to shower wall to get rid of mold/mildew on there. They make cleaners specifically for washing machines... I use one from Affresh and it works Well
Question:	Does this stuff really work? I have greese or muck markings on my gutters. Like stains. I heard this removes it, but can someone who has used it verif
Answer:	yes it can.But it is suitable for stains caused by mold

Product features

Small changes in product size & weight lead to lower carbon emissions.

We created Compact by Design to identify products that, while they may not always look very different, have a more efficient design. With the removal of excess air and water, products require less packaging and become more efficient to ship. At scale, these small differences in product size and weight lead to significant carbon emission reductions.

Fast and Easy

No hard scrubbing. No dangerous pressure washers, no acids or bleach. Concrete is like a hard sponge. Oil stains penetrate deep, making removal often impossible. Pull is out breaks down the oil, penetrates deep and draws the oil stain out of the concrete. (test first) Cleaning oil stains from a porous surface can be very difficult. Every day 'cleaners' tend to drive the stain deeper into the surface, leaving shadowing stains that can be permanent.

Improve Your Home's Value

Studies show that nothing detracts more from your home’s value than dirty oil stains on your driveway. No matter how nice the rest of the home looks, the human eye will be drawn to the oil strain on the driveway. Eliminating the ugly oil stains allows people to appreciate the full value of your home and investment.

Improved Safety

Oil stains on concrete, pavers, natural stone, garages etc are extremely slippery, especially when wet (rain or snow). Hundreds of thousands of people slip and fall on oil surfaces every year. This is especially dangerous for older and less agile people.

Healthier Home

foot traffic from people and pets will unavoidably track oil residues from oil stained driveways into the home and car. These oily residues permanently damage carpet and create unnecessary stains in your home. Avoid these stains and extra related cleaning work by eliminating the problem at the source.

Test First

1) Numerous factors can affect how concrete accepts and releases a stain or if the stain is permanent. Type of pour, where densifiers or additives in the mix, porosity, etc can all play a role. Pull it out works by emulsifying the stain and drawing it into ‘solution’ a test spot verifies if the stain is being emulsified or if pre-treatment is needed.

Pour On

Apply pull it out concrete oil stain remover to the entire stained area. Exceed the stained area by approximately one half inch.

Let Dry

1) Depending on temperature and humidity , pull it out concrete oil stain remover will completely dry in a couple hours or up to a full day. Once dry , it will appear chalky white. If there are still translucent areas, the product needs more drying time.

Brush Away

1) After completely drying, the treated area can be brushed away with a stiff brush. A wire brush is most times the best option. Vigorously brush the dried, treated area. Sweep up the remaining cleaned area. Any white residue will fade over time.

HEAVY CLEANING

Use our full strength cleaner with no dilution for areas that require heavy cleaning.

• Ovens
• Grills
• Grease & Oil Stains
• Floor Wax Removal
• Paint Clean Up
• Range Hoods & Vents
• Carbon & Graphite Deposits
• Tools

MEDIUM CLEANING

Use a 10:1 dilution for standard indoor and outdoor cleaning.

• Counters
• Stovetops
• Sinks
• Showers, Bathtubs, & Tiles
• Decks & Patios
• Patio Furniture
• Baseboards

LIGHT CLEANING

Use a 100:1 solution for light cleaning on sensitive areas.

• Floors (terrazzo, tile, laminate)
• Painted Surfaces
• Steel
• Chrome
• Plastics
• Window Blinds

Deep Clean Without the Danger of Traditional Chemicals

We utilize a new water based technology that super charges the ability to lift and remove oils, grease and particulate soils. Users get 3X better cleaning. This supercharging allows us to buffer the chemistry so it is safer for users and surfaces. You get incredible cleaning without the dangers.

Directions For Use:

1. Apply to surface.
2. Wipe clean with a damp cloth, sponge, or paper towel.
3. For stubborn soils, let set for several minutes, scrub with a scouring pad or stiff brush, then wipe clean with a damp sponge or paper towel.

Product description

Liquid Oil Based Wood Penetrating Stains are made from the highest-quality oils, resins and pigments to ensure your finishing project will be an easy and rewarding experience. These wipe-on stains are designed to be applied over raw wood surfaces.

• Oil based stain penetrates the grain of the wood to promote uniform acceptance of stain
• Prevents streaking and blotching to help ensure a beautiful, even stain
• Brush, Wipe On with Clean Rag, Wipe Off
• Clean up with mineral spirits
• Can be top coated with oil or water based products such as General Finishes Arm-R-Seal, Gel Topcoat, High Performance, or Flat Out Flat

User questions & answers

Question:	Can this be used on outdoor teak furniture
Answer:	Yes, it can be used on your hair, I use it daily and my hair has a shine and it looks healthier.
Question:	is this suitable for exterior wood
Answer:	I too am a novice. But I have a rose water oil and a muscle relaxant oil that both say to mix with the almond oil before using. I think it is because the first two are so concentrated they need to be toned down a little. The almond is supposed to have minimal odor so as not to affect what it is being mixed with. The almond oil is referred to as a base oil.
Question:	How much area does 1 qt cover
Answer:	I do
Question:	Are these stains good for exterior use
Answer:	Through long-term use, wrinkles will disappear little by little.

Product description

Penofin Ultra Premium Transparent Clear Oil-Based Wood Stain 1 gal.

• PENOFIN RED LABEL CLEAR GALLON

User questions & answers

Question:	Is this product recommended to use on Ipe wood outdoor furniture
Answer:	Yes, most definitely.
Question:	Would this product work on my pressure treated deck? I know there is a pressure treated product from Penofin, but would this work as well
Answer:	Red label works excellent on pressure treated wood. We just recommend it be fully dried out before applying, typically installed for 6+ months prior.
Question:	Will this product protect my wood windows that have been fully sanded down exterior? They receive almost no direct sunlight
Answer:	It is an oil based product and will protect. I have used it on a cedar fence I made and on cedar outdoor benches, and have found that they turn black over time. Don't think I'll use it anymore.
Question:	Can this stain be painted over with a solid stain type. I wish to use it as a preservative undercoat
Answer:	This is a question for the manufacturer, however they do have many colors already blended into this product that may serve this dual purpose in one application.

Product description

This listing includes 1 Gallon of Woodrich Brand Timber Oil Stain in the Amaretto color. This can cover up to 150 SQ FT of wood. The Woodrich Brand wood stain is extremely easy to apply whether you are a DIY homeowner or contractor. First-time users can expect perfect results as well. It will not overlap, run, or leave drip marks because it dives deep to replenish old and dry wood. It can also be applied to new wood and is loaded with trans-oxide pigments which provides much better coverage than other paraffinic stains. Even those who have never worked with wood before can achieve a beautiful finish with this easy to use product.

• EXTREMELY EASY TO APPLY & MAINTAIN - You will achieve a flawless finish with no risk of overlaps or runs that can be reapplied without having to strip the previous application.
• IDEAL FOR USE ON NEW WOOD - Can be applied to new wood with no need to let the wood "weather out".
• PERFECT FOR SPAY APPLICATION - Can be applied with a pump up garden sprayer or any other application method.
• RICH NATURAL FINISH - Transparent Oxide Pigments provide a rich finish that highlights the natural beauty of your wood.
• SAMPLE COLOR KITS AVAILABLE - Test our colors before purchasing your order by trying our sample color kit to make sure you get the color you want!

User questions & answers

Question:	Mildew resistance and UV protection in semi transparent stain
Answer:	yes
Question:	Can this be applied to a damp deck
Answer:	I have not tried applying the Timber Oil Deep Penetrating Stain to wood dampened by water however oil and water do not mix very well. Next, because the Timber Oil is designed to penetrate the wood, dry wood, I believe damp wood will hinder the process and that will result in a less than satisfactory result and defeat the purpose of applying the Timber Oil. Indeed, you may find that the Timber Oil does not penetrate the damp wood at all. I think you should wait to apply the Timber Oil Deep Penetrating Stain until the wood has dried out. Maybe a month or so after the last rain and you have had some warm weather to dry out the wood, because it will penetrate the dry wood better.
Question:	can i use this product on an older deck that been stained before
Answer:	Oil stain can be used on any wood that is dried out and "thirsty". It is not a paint that will cover up a different color paint or stain but enhances the natural wood look while protecting.I would venture to say that most decks it is used on are older decks that have been stained before. It is a great product for what it does. If you want something to cover up old paint or hide previous stains-That isn't what it is designed for. If most of your old stain is faded off to where you dont hardly see it-This is perfect.
Question:	How does it hold up to rain and the SW sun
Answer:	Holds up the best of any stain I tried. It is also very resistant to mold. I am in the NE

Product description

SEAL-ONCE NANO Penetrating Wood Sealer & Stain protects and stabilizes wood beneath the surface against water damage & decay. It is a great investment for your outdoor wood products and a safe way to enhance wood and extend its useful life by years. The water-based formula uses proprietary nanotechnology to form a flexible breathable barrier by coating the wood fibers at the cellular level. Protects up to 10 years on vertical surfaces & 6 years on horizontal with no toxic chemicals. This makes it easy to apply and safe for people, pets & plants. NANO allows wood to age naturally without decay, and can be used to preserve old or new wood, extending its natural life. It is non-film forming and will not alter the natural beauty of the wood. NANO is a wood waterproofer that preserves the integrity of the wood by inhibiting rot, mold and mildew growth & eliminates warping and cupping. NANO goes on milky white and dries clear. It is also available in 11 semi-transparent wood stain color tints, that provide added protection against harmful UV rays: Battleship Gray, Black, Bronze Cedar, Brown, Cape Cod Gray, Cedar, Light Brown, Mahogany, Natural, Redwood & Shale Gray Recommended Applications: Designed to be used on unfinished interior and exterior wood surfaces including: Cedar shingles • Wood siding • Exposed beams • Fences • Planters • Outdoor furniture • Play structures • Plywood • Pressure treated wood • Architectural millwork • Woodworking Typical sealers form a barrier on the surface, trapping moisture below the surface. As water evaporates, it causes the surface coating to crack & peel, leaving a surface that requires continued maintenance. SEAL-ONCE protects against water damage, using proprietary nanotechnology that penetrates deep into the wood and bonds to the wood fibers and cells at a microscopic level. SEAL-ONCE protects from the inside out to provide unparalleled protection & stability for wood.

• Water-based sealer with advanced penetrating nanotechnology. This premium wood sealer performs like an Oil-based product, without any noxious solvents or toxic chemicals.
• Great investment to enhance and extend the natural life of wood. Protects against water damage for up to 10 years on vertical surfaces & 6 years on horizontal.
• Ultra Low-VOC wood sealer safe for people, pets, plants or marine life. Easy to apply with soap & water clean-up. Save time with wet on damp application.
• Prevents warping, cupping, wood rot, mold, mildew, staining, decay & will not peel.
• When used as a wood stain creates a UV barrier to prevent fading. Rich color palette available in 11 different color tints. Clear formula allows wood to turn gray naturally.

User questions & answers

Question:	is this a clear tint. I want to keep the natural look of my wood
Answer:	It will bounce a little bit, but you still have to open it by hand
Question:	whats the voc rating on this
Answer:	The electronic lock allows for a 3–8 combination codes. The setting procedure is explained in great detail in the attached manual
Question:	If you apply one coat to both sides of 3/4 plywood do I need a second coat
Answer:	keep your backup safe well
Question:	Can you use a sprsyer to apply, or does it have to be applied with a brush or roller
Answer:	It will open with the key. The fingerprint sensor will not work if the battery is dead.

Product features

The Science of SEAL-ONCE and Innovative Use of Nanotechnology in Wood Finishes & Stains

Unlike many top-coat sealers sold today that trap moisture below the surface, NANO creates a flexible, breathable barrier which allows water vapor to escape. This key feature helps prevent damage to wood caused by water intrusion, such as: wood rot, decay, mold & mildew growth, cracking & splitting. Typical wood sealers form a barrier on the surface of the wood, trapping moisture below the surface. As the water evaporates, it causes the surface coating and the substrate to crack & peel, leaving a broken surface that requires continued maintenance and is susceptible to additional damage. SEAL-ONCE uses cutting-edge, nano-particle technology to allow wood to breath and help prevent water vapor damage by protecting wood from the inside out.

Water-based Product that Will Not Harm People, Pets, Plants, Livestock or Marine Life.

SEAL-ONCE products are ultra-low VOC, low odor, non-toxic, non-flammable and non-ozone depleting. They are safer for the environment and do not contain nitrates, phosphorous compounds or heavy metals like many Oil-based sealers & stains on the market today.

Quick & Easy Application

Apply first coat with a synthetic brush; pump-up garden sprayer; air-assisted; and/or airless sprayer. Use 15-17 tip and medium to coarse spray pattern. When spraying, always back brush for best results. Second coat can be applied once first coat has penetrated but is still damp. Second coat must be applied within one hour of applying first coat. For best results, apply in the shade and out of direct sunlight.

Available in 11 Tinted Wood Stain Colors

NANO can be tinted for use as wood stain in any of the 11 color tints available: Clear, Light Brown, Natural, Brown, Mahogany, Redwood, Bronze Cedar, Cedar, Black, Battleship Gray, Shale Gray & Cape Cod Gray. The tints are sold separately and when mixed with Clear, the tinted formula provides additional UV protection from harmful sun rays.

Surface Preparation & Coverage

Approximate coverage: 250-350 sq. ft./gallon per coat. Actual coverage will vary due to the porosity of the surface. All surfaces should be cleaned with SEAL-ONCE All Wood Cleaner before sealing for best penetration and performance. Remove all old coatings, dust, debris and loose material. Remove oil, grease, algae, grime, mill glaze and mold and mildew stains with appropriate cleaners.

Product description

EXOTIC HARDWOOD EXTERIOR FINISH: Penofin's Hardwood Finish can penetrate dense hardwoods that need nourishing and stabilizing. This unique formula penetrates deep into the wood fibers and does not create a surface film. Unlike high-solid stains that simply coat the surface, Penofin’s Hardwood Finish, using sustainably harvested Brazilian Rosewood Oil, is the choice of wood experts who know that wood penetration is key to longevity and beauty. Penofin allows wood to breathe, important in working with exotic hardwoods such as mahogany, teak, Ipe, Brazillian Redwood, and many other species. Only Penofin Penetrating Oil Finish can meet the needs of hardwood in fiber protection, penetration, stabilizing, and nourishing. ~ FEATURES: Used for all fine hardwoods such as: Ipe, Pau Lope, Ironwood, Mahogany & Teak. Transparent natural finish. One-coat application. 99% ultraviolet protection via transoxide pigments. High-grade mildewcide for mold/mildew protection. Coverage: Approx 400 square feet per gallon. ***** RESTRICTED: This product cannot be shipped to the following states: AK AZ CA CT DC DE HI IL IN MA MD ME NH NJ NY OH PA RI VA VT. All other states ship via GROUND transport only.

• ***** RESTRICTED: This product cannot be shipped to the following states: AK AZ CA CT DC DE HI IL IN MA MD ME NH NJ NY OH PA RI VA VT. All other states ship via GROUND transport only.
• Transparent natural finish
• 99% ultraviolet protection via transoxide pigments
• High-grade mildewcide for mold/mildew protection
• Used for all fine hardwoods such as: Ipe, Pau Lope, Ironwood, Mahogany & Teak

User questions & answers

Question:	How can i get the msds for this product
Answer:	https://www.penofin.com/product-support/product-literature
Question:	what is the coverage for one gallon
Answer:	Based on my experience putting it on ipe (Brazilian ironwood), if it's a first coat on non-oiled wood, I wouldn't plan on a gallon covering more than about 200 sq ft. You need to apply a second coat within 3-4 months to reinforce it, and that may cover more like 300 sq ft, depending on how long between the coats. You might squeeze out more coverage each time if you're judicious applying it. Assuming the deck boards are 5.5", I would recommend using a or 9" staining pad on a handle for first putting it on, then wipe it in with a rag or staining pad. You have to wait 30 minutes before wiping it in, so I would do four boards, skip the next four (so I have a place to stand when coming back to wipe it), do the next four, skip four and so on. Then later I would come back to do the other groups of four boards. Don't roll anything like a grill across the deck for at least two days after having oiled it, so it needs lots of time to fully cure. It can look terrific when you're done.
Question:	Would this be appropriate for use on the exterior of an antique southwestern style wood front door
Answer:	not sure on door - i used it on ipe decking - not happy with it - turned black - lost all of the beautiful colors of ice wood.
Question:	Is it required to sand an ipe deck before applying ipe oil
Answer:	No. The only instance where this is required would be when other types of finishes had been applied in the past and may prevent penetration.