13 best depth stud finder

• ADVANCED SENSOR TECHNOLOGY AND HIGHER ACCURACY PLUS MAGNET DETECTION LEADING YOU TO LOCATE WOOD METAL STUD AC WIRES QUICKLY - A good stud finder needs a high accuracy and various use. Tavool magnetic stud finder is an electronic Sensor Detector which can well locate studs/wood/AC wires in various wall structures. The MAGNET on the bottom could help confirm the exact metal position at your convenience. You would surely find great use with this magnetic stud scanner
• UPGRATED 6 IN 1 MULTIFUNCTION GIVING YOU MORE DETECTING CHIOCE - Tavool wall scanner includes 5 scanning modes for woods, metals, AC wires and other objects in walls, ceilings etc. Stud modes with 3 depth types would give you a better experience for your different demands, with a detecting range up to 1.5 inches in drywall. Metal mode could detect steel pipes, rebar or copper bits deep up to 2.36 inches, while AC mode for live electrical lines up to 2 inches.
• LARGE LCD SCREEN and EASY TO READ Displaying Stud Material with its Accurate Position - This Tavool digital stud scanner features a large LCD display together with clear sound warning when you are detecting. The LCD display presenting direction and intensity of beeping would indicate whether you are closer to the target. This quick and clear scanning with less time and efforts, could certainly make your project EASIER
• AUTOMATIC CALIBRATION and SIMPLE TO USE - You can easily calibrate this scanner by moving it over the wall until the BEEP sounds and the screen contents disappear. This calibration before your each detection could ensure you more reliability and accuracy. Then just move it around as you need and the stud finder would work efficiently
• ERGONOMIC GRIP and SAFETY - The ergonomic and aerodynamic body design would give you more comfortable experience when you hold this Tavool scanner from any angle. This wall detector can quickly locate studs metals AC wires and avoid you from dangers while hanging pictures, installing TVs or redecorating garage shelves etc

User questions & answers

Question:	Does this finder detects metal rebars in a concrete wall
Answer:	3” long and a1&1/2” wide pretty much the same as any other tape measure
Question:	Will this work on plaster walls in a house built in
Answer:	Thank you for your interest in our product. We currently don't have a shorter one like 16' or 25' in our store. We may launch the shorter one later this year. Once it's available, it will show in our store.

Product description

This CRAFTSMAN metal and wood stud Finder detects center of stud for accurate results up to 3/4-in depth and has auto calibration for consistent readings. In addition, detects the presence of live AC.

• Detects center of stud for accurate results
• Detects wood and metal studs up to 3/4inches Deep
• Auto calibration for consistent readings
• Detects presence of live AC
• Thin profile for ergonomics and storage
• LED Arrows and Audible Notifications of Stud Location
• Full Lifetime Warranty, refer to "Warranty & Support" section below for full details

User questions & answers

Question:	Can it detect properly through plywood walls
Answer:	Has a company name on it from Huntersville NC in USA but honestly I do not know if it was manufactured there nor can I guarantee where it originally came from. We order it from Irwin Tools is all I can say for sure.

Product description

This CRAFTSMAN Stud sensor detects center of stud for accruate results, detects wood and metal up to 1-1/2 inches and up to 2 inches in metal. This stud sensor also has auto calibration for consistent readings, detects presence of live AC, and the center marking pin provides a visual reminder of stud location.

• Detects center of stud for accurate results
• Detects wood and metal studs up to 1-1/2inches Deep
• Auto calibration for consistent readings
• Detects presence of live AC
• Center marking pin provides a visual reminder of stud location
• Thin Profile for Ergonomics and Storage
• LED Arrows and Audible Notifications of Stud Location
• Full Lifetime Warranty, refer to "Warranty & Support" section below for full details

User questions & answers

Question:	Can this device locate a wood stud up to 3 inches
Answer:	Had to look long and hard to find the weight of this chair...Wish manufacture had mentioned it...i feel this is an important point
Question:	Where was this made
Answer:	When the tape is in the unlocked position, it will retract back into its case.
Question:	Does the 3-inch depth version have rubber feeling grips or is it hard black plastic
Answer:	I think it's about an inch. Only lasted me a couple weeks at work. Blade snapped at the 7' mark.

Product description

Stud finders are great and necessary tools when you begin certain home project. A good stud finder can make your DIY task easier and more safely. MERECE stud finder could help with all these and keep you away from unnecessary mishaps and miserable damages.



Merece stud finder is equipped with large LCD display, ergonomic design and advanced sensor technology, giving you a higher accuracy when detecting wood metal studs or live AC wires. The 5 scanning modes (1⁄2in scan, 1in Scan, 1½in scan, metal scan and AC scan) makes it a good helper for both DIYers and carpenters. With this device, you could quickly find a proper position on the wall without making any extra holes. Merece wall scanner is a great tool that is used to detect exact location of framing studs that are located behind drywalls, ceilings etc.



This electronic sensor wall stud finder quickly locate edges and centers of metal, studs, joists, pipes, live AC wire behind walls, floors and ceilings, via electronic signals. The cost of a wall scanner is certainly always less than the cost of repairing the damage from various mishaps before hanging something. TAKE MERECE HOME AND START YOUR PROJECT EASILY AND SAFELY!



Note:

This stud finder can quickly locate metal, studs, joists, pipes, live AC wire behind all kinds of walls floors and ceilings but except cement board walls and brick walls.

• ADVANCED SENSOR TECHNOLOGY AND HIGH ACCURACY Leading You to Locate Wood Metal Stud Live AC Wires Quickly - Merece stud finder is an electronic sensor wall detector which can well locate wood beam joist pipe metal live AC wire behind drywalls. You would surely enjoy a good project with this wall scanner
• UPGRADED 5 SCANNING MODES UP TO 60MM DEPTH Providing You More and Better Scanning Choices - Merece wall stud finder features 5 scanning modes for woods, metals, AC wires and other objects in different wall structures. 3 Stud Scan modes give you a detecting range up to 0.5-1.5 inches(12-38mm) in drywalls, Metal mode could detect pipes, rebars or copper bits deep up to 2.36 inches(60mm), while AC mode for live electrical lines up to 2 inches(51mm).
• LARGE LCD SCREEN Displaying Making your Results EASY TO READ - This Merece wall scanner is equipped with a large LCD display and a clear sound warning. The LCD displays the direction and intensity of beeping indicates whether you are closer to the target. All these makes your scanning project easier and with less efforts
• AUTOMATIC CALIBRATION – Power on this stud finder and it would complete once calibration. A correct calibration before your each detection could ensure you more reliability and accuracy. Please make sure you didn’t calibrate it on the stud position accidently. Then just move it around as you need and it would make your project better and efficiently
• Ergonomic Grip and High Quality Ensuring your Project Safely and Easily - its ergonomic design would give you better experience when you hold this Merece wall scanner from any angle. This wall detector can quickly locate edges and centers of studs metals AC wires and make you stay away from project damages and mishaps

User questions & answers

Question:	does this scan through tile
Answer:	I believe so.
Question:	Is it working for metal studs too?Some walls instead of wood studs have metal studs
Answer:	16 from ground
Question:	Can the metal detection mode be used to locate non-live wiring
Answer:	Yes you can. We have used ours during Beach Volleyball Competitions.
Question:	How do I turn sound on
Answer:	I'm 6/4 and it's tall enough

Product description

CRAFTSMAN Stud sensor works on surfaces covered in wallpaper and fabric. Edge detection to help locate stud edges of both wood and metal stud.

• Depth range of 3/4 inch through drywall, works on surfaces covered in wallpaper and fabric
• Edge detection to locate stud edges of both wood and metal stud
• Shock resistant and water resistant body for durability and long life
• Takes 9 volt battery
• Full Lifetime Warranty, refer to "Warranty and Support" section below for full details
• Battery not included

User questions & answers

Question:	What kind of batteries does this need
Answer:	This unit takes a 9 volt battery
Question:	is it a good stud finder for mounting a TV
Answer:	No, it isn’t a good stud finder at all. Spend $10 more at Lowes for one that actually works.

Product description

The MultiScanner A250 is Zircon’s newest electronic stud finder, metal detector and live AC scanner that is sold exclusively on Amazon. The A250 is designed with a smooth, ergonomic rubber grip allowing for a comfortable yet secure hold for any size hand, at any angle. This multifunctional surface scanner uses the most recent technology in density detecting software and circuitry. The Zircon A250 has a 4-mode selector switch making it easy to change functions while the ultra-bright LCD screen, patented SpotLite Pointing System, and audio tone all indicate the location of the target. This Zircon scanner also comes equipped with a Signal Strength Indicator that helps to distinguish between shallow and deep targets. The MultiScanner A250 includes a backlit display for hard to see places and ACT (Auto Correcting Technology) that automatically corrects common user errors, such as when scanning begins over a stud, in addition to a Low Battery Indicator to alert its users to replace its battery for optimal performance results. The tool constantly scans its surroundings and recalibrates itself if necessary. The scanner has 2 stud scanning modes to locate the center, edges, and direction of wood and metal studs and joists behind walls, floors, and in ceilings. In StudScan Mode, the MS A250 scans up to 0.75 of an inch (19 mm) deep. Switch over to DeepScan Mode to double the scanning depth to 1.5 inches (38 mm). Metal Scan Mode locates non-ferrous metal, such as copper pipes, up to 1.5 inches (38 mm) deep and ferrous metal, such as rebar, up to 3 inches (75 mm) deep. Metal Scan Mode finds studs behind lath and plaster walls, tile, drywall and stucco walls by identifying the consistent pattern of screw or nail heads in the studs. The A250 is programmed with a Wire Warning Detection feature that indicates the presence of live, unshielded electrical wires up to 2 inches (50 mm) deep when using StudScan, DeepScan and Metal Scan Mode. In addition to Wire Warning Detection, the A250 also includes AC Scan Mode to detect, locate, map, and trace live wires. The Zircon MultiScanner A250 is a perfect choice for serious users, such as home improvement hobbyists and professional contractors. With the Zircon MultiScanner A250, you can safely maneuver through the most complicated of projects with the professional confidence that comes from owning a Zircon.

• The Zircon MS A250 is an electronic edge and center stud finder, ferrous and non-ferrous metal Detector, and live AC wiring scanner sold exclusively on Amazon
• Wire Warning Detection indicates the presence of live, unshielded electrical AC wiring while scanning in StudScan, DeepScan, and Metal Scan modes
• Signal strength indicators help distinguish shallower targets from deeper ones as act (auto correcting technology) automatically corrects common user errors, such as when scanning begins over a stud
• Ergonomically designed grip allows a comfortable hold on the tool for any size hand, at any angle while the patented spotlite pointing system clearly indicates the target location
• One fully charged 9V battery, not included, is required for the stud scanner to run at optimal performance to help you easily find studs, metal and live AC wiring while avoiding electrical hazards

User questions & answers

Question:	Will it work with brick walls
Answer:	Hi. If your drywall is attached to a layer of plywood that is attached to the stud(s), then, yes, it can work. Keep in mind, the "stud scan" mode is designed (optimized) for a single layer of 1/2" drywall. Any surface thicker than that, you would need to use the "deepscan" mode. The deepscan mode scans down approx. 1&1/2". Please feel free to contact us. Technical and product support services are available free of charge during normal business hours Mon. thru Fri. 8:00am to 5:00pm PST. Please visit the Zircon website for contact info. Thank you.
Question:	Question before i send this a250 back. the scanner was inside an unsealed bubble-wrap bag inside shipping box. no packaging. is this normal
Answer:	Hi. Zircon does not manufacture a case for this scanner, however there are third party offerings you will find on Amazon. Just search : "zircon stud finder" in tools and home improvement. There are a few offerings available. I hope this information is helpful. Thanks.
Question:	Can this find studs behind composite/concrete siding
Answer:	Hello Pablo. No it is not able to find PVC water pipes. Thank you.
Question:	Does it come with a case
Answer:	If your house was constructed using metal studs then - perhaps. I had a hard time getting mine to pick up a stud. I was installing a shelf at my sister-in-law's Condo and could not get it looking ok where the studs were "detected" so, I went with the screw in wall board type. 1st one was destroyed because there was a stud there so, draw your own conclusions.

Product features

Zircon MultiScanner A250

The MS A250 is a handheld tool dedicated to quickly and efficiently find studs, detect metal and scan for live AC wiring. The A250 comes equipped with 4 scanning modes: StudScan, DeepScan, Metal Scan and AC Scan.

4 Mode Multifunctional Wall Scanner with Backlit Display

The Zircon MultiScanner A250 makes scanning easy with its newly designed ergonomic grip. The scanner's StudScan and DeepScan Modes locate the edges and center of wood and metal studs and joists behind walls, floors and ceilings. StudScan finds shallower wood or metal studs up to 0.75 in. (19 mm) deep while DeepScan doubles the scanning depth to 1.5 in. (38 mm).

Metal Scan locates both non-ferrous (non-magnetic) metal, such as copper pipe, and ferrous (magnetic) metal, such as rebar. The A250 is able to detect non-ferrous metal up to 1 in. (25 mm) deep, and ferrous metal up to 3 in. (75 mm) deep.

AC Scan Mode allows you to narrow the location of live AC wiring up to 2 in. (50 mm) deep. With AC Scan, the MS A250's display changes to indicate when the tool is moving towards or away from live electricity. This enables you to adjust the tool's sensitivity to the live AC. This procedure can be repeated multiple times, as needed.

The A250 WireWarning Detection feature automatically operates in StudScan, DeepScan and Metal Scan Modes. This safety feature alerts you to the presence of live, unshielded electrical AC wires while scanning for studs and metal.

Before use, always be sure to install a brand new 9V alkaline battery. Zircon scanners, particularly those with LCD screens, require and consume a great deal of current from batteries. For optimal performance, brand-new, recently purchased alkaline batteries with an extended expiration date, are strongly recommended for use in these tools.

AC Scan

Scan Live (Hot) Unshielded Wires.

AC Scan Mode finds live, unshielded electrical wires up to 2 in. (50 mm) deep.

Before scanning, hold the A250 flat against wall and press the Power Button to calibrate. Be sure not to move the scanner while calibrating. After a short beep sounds confirming calibration is complete, continue pressing the Power Button and slide the scanner slowly against the surface.

Mark the spot where the most middle bars display. Continue in same direction until bars reduce, then reverse direction. Mark the spot where the display bars peak.

The midpoint between the two marks is the location of the live AC wiring.

Continue this process to track the wires through the walls.

Always turn off power when working near electrical wires (except when scanning)

Metal Scan

Detect Both Ferrous and Non-Ferrous Metal

Use Metal Scan Mode to locate and avoid hazards, such as pipes, behind walls and determine if a stud is wood or metal.

Metal Scan Mode detects non-ferrous metal, such as copper pipe, up to 1.5 in. (38 mm) deep, and ferrous metal, such as rebar, up to 3 in. (75 mm) deep.

To use, be sure to first calibrate the A250. For maximum sensitivity, press and hold the Power Button while holding the scanner away from the surface. Once a short beep sounds confirming calibration is complete, place against the surface to be scanned. Be sure to continue to hold the Power Button.

Just like in AC Scan Mode, slowly slide the scanner across the surface and mark the spot where the most display bars peak. Continue scanning until the bars reduce and reverse the direction.

The midpoint between the two marks is the location of the metal target.

Note: WireWarning Detection works in Metal Scan Mode. The Live AC Icon will appear when live, unshielded wires are detected.

StudScan and DeepScan Modes

Use StudScan Mode to find the center, edges, and direction of wood or metal studs up to 0.75 in. (19 mm) deep.

For best results, always start in StudScan Mode when looking for studs.

If StudScan Mode provides irregular readings, or the Signal Strength Indicator is weak, the studs might be behind deeper than 0.75 in. (19 mm). Slide the Mode Selector Switch to DeepScan Mode. This doubles the scanning depth to 1.5 in. (38 mm) deep and allows for increased accuracy on deeper targets.

Before scanning, hold the A250 flat against wall and press the Power Button to calibrate. Be sure not to move the scanner while calibrating. After a short beep sounds confirming calibration is complete, continue pressing the Power Button and slide the scanner slowly against the surface.

When the A250 finds the edges and center of a stud, 'Edge' and 'Center' displays respectively, indicating you have found your target. When the stud's center is located, the SpotLite Pointer also illuminates and a short beep sounds.

The center of the stud is the stud's most secure location. It is critical to drill in the center of a stud when mounting heavy objects.

Note: WireWarning Detection works in both StudScan and DeepScan Modes. The Live AC Icon will appear when live, unshielded wires are detected.

Auto Correcting Technology (ACT)

Automatically Have Common Errors Corrected.

This feature enables the scanner to automatically adjust for common calibration errors. It checks calibration 10 times per second and automatically recalibrates when/if needed. If scanning begins directly over a stud, the tool will transparently recalibrate, so you don't have to, and will find that stud when you scan back over it.

This recalibration is usually transparent and no indication is made. If an arrow icon illuminates, the scanner was calibrated near or over a stud and then moved away. The arrow indicates the direction of the missed stud.

Frequently Asked Questions

Question: Does the MultiScanner A250 include a battery?

Answer: No. Zircon stud finders and detectors, particularly those with LCD screens, require and consume a great deal of current from batteries. For optimal performance, a brand-new, recently purchased 9V alkaline battery with an extended expiration date, is not included but is required to properly power the A250.

Question: I inserted a 9V battery, but the scanner doesn't turn on or is giving me strange readings. Is my scanner broken?

Answer: Please be sure to use a fresh, brand new 9V alkaline battery with an extended expiration date. Batteries that may work in a smoke detector or remote control may not have adequate voltage to power the sensing technology in MultiScanners.

Question: Does this scanner need to be calibrated?

Answer: Yes, as with all Zircon scanners, the MultiScanner A250 needs to calibrate to the surface before scanning. Calibrating the scanner on an empty wall gives the device a chance to measure the wall thickness and material density, as well as register factors like humidity, temperature, and even the minor electric readings from your hand, which all have an impact on the readings from the wall. Calibrating is easy and just takes a second. To calibrate, simply place the unit flat against the surface to be scanned and press the Power Button. When powering the A250 on, all the icons on the screen and the SpotLite Pointing System will briefly flash and the scanner will beep. After this occurs, the screen will then clear and, depending on the selected mode, the words 'StudScan', 'DeepScan', 'Metal' or the Live AC Icon will remain, indicating that calibration has occurred and the scanner is ready to begin scanning. It is important not to move the scanner or begin scanning until the calibration process has taken place for the most accurate results.

Question: What does 'Center Finding' mean?

Answer: Center Finding stud finders locate both the edges and the center of wood and metal studs and joists in one step. 'Edge Finding' stud finders, on the other hand, only find the edges of studs, so you must determine the center. Finding the center of the stud to mount heavy objects is critical as the stud's center is the most secure location of the stud.

Question: What is DeepScan Mode?

Answer: Unlike StudScan Mode which scans through one layer of drywall up to 0.75 in. thick (19 mm), DeepScan Mode scans through 2 layers of drywall up to 1.5 in. (38 mm) deep. DeepScan Mode is a higher sensitivity scanning mode that should be used when there are extra layers of wallboard or paneling. Extra layers in a wall can make it difficult to find studs in regular StudScan Mode. To minimize false positives and/or finding other objects further behind the wall that may not be a stud, always start your scan in StudScan Mode first.

Question: How can I be certain the objects found behind my wall are studs in DeepScan Mode?

Answer: DeepScan Mode has increased sensitivity so you may have located something other than a stud. Studs are equally spaced to either side (12, 16, or 24 in. apart) and typically run from floor to ceiling. To better confirm that what you found is a stud, check for other studs equally spaced to either side and for the same stud at several heights directly above and below the first stud indication. A stud reading would also measure approximately 1.5 in. (38 mm) apart from each edge. Anything larger or smaller may not be a stud if not near a door or window.

Question: Will this MultiScanner A250 locate metal studs?

Answer: Yes, the A250 will locate metal studs in StudScan, DeepScan, and Metal Scan Modes. Since stud finders are looking for a change in density behind drywall, not a particular material, in StudScan, DeepScan, and Metal Scan Modes, the detector will react to metal studs the same as it would for wooden studs. The A250 will locate wood and metal studs up to 0.75 in. (19 mm) deep while DeepScan Mode locates targets up to 1.5 in. (38 mm) deep. In Metal Scan Mode, the detector will only detect metal studs, in addition to any other metal, within its specified scan depth and range.

Question: Why does the scanner beep and the lights flash when scanning for a stud?

Answer: The scanner could've been calibrated over a stud, calibrated on a dense part of the wall, or the back of the unit may have slightly lifted or tilted during the scan. Move the MultiScanner A250 over a couple of inches to the left or right, re-calibrate, and start your scan again.

Question: What is WireWarning Detection?

Answer: WireWarning Detection is a feature that is always on while you are scanning in StudScan, DeepScan, and Metal Scan Modes to alert you to the presence of live, unshielded electrical AC wires up to 2 in. (50 mm) deep. As you approach an area with live AC voltage, the Live AC Icon will display on the LCD screen. This is the WireWarning Detection Icon. If your scan directly starts over an area with live AC voltage, the Live AC Icon will flash. Please turn off the electricity and use extreme caution in areas where live ac voltage is detected before nailing or drilling.

Question: What is the difference between AC Scan and WireWarning Detection?

Answer: Zircon MultiScanner models have a feature called WireWarning Detection that alerts you when the scanner is in the vicinity of live AC voltage while you are actively scanning for studs or metal. WireWarning Detection continuously detects hot, unshielded electrical wires up to 2 in. (50 mm) in StudScan, DeepScan, and Metal Scan.

AC Scan, however, is a dedicated scan mode in which the user interface displays bars on the LCD screen that indicate when the scanner is moving towards the source of the voltage or away. Both WireWarning Detection and AC Scan Mode may indicate over a smaller or larger zone around the wire depending on conditions. Both features allow the user to interactively calibrate the sensitivity to AC voltage. If the unit indicates over a large area the user can re-calibrate the unit closer to the source of AC in order to reduce sensitivity so the unit will indicate AC over a smaller zone around the wire.

Question: What can this product do in terms of wire tracing?

Answer: Zircon scanners with AC Scan Mode are not full featured wire tracers. They will however, enable you to map a section of a wall. AC Scan Mode can assist you in locating the route a wire takes through sections of the wall.

Question: Why does the area of voltage appear much larger than an actual wire?

Answer: Static charge may develop on drywall, spreading voltage detection as much as 12 in. (30 cm) laterally from each side of an actual wire. To narrow detection, turn the scanner off and on again at the edge of where the wire was first detected and repeat the scan.

Question: I suspect electrical wires in a certain area when I scan, but why am I not detecting any?

Answer: Wires may be shielded in metal conduit or behind a metallic wall covering. It could also be that the wire is deeper than 2 in. or that the wire may not be live (hot). Try Metal Scan Mode to see if you can find metal, wire, or metal conduit. Always exercise extreme caution when working near electricity.

Question: Does the A250 work on wood paneling and other wood surfaces?

Answer: The A250 is optimized to scan through standard interior sheetrock / drywall (gypsum) construction. This scanner will work on wood, plywood, wood paneling and particle board up to 1.5 in. (38 mm) thick when in DeepScan Mode.

Question: Will the A250 work on textured wall surfaces, acoustic ceilings, or wallpaper?

Answer: Yes, the A250 will work on textured surfaces and dried wallpaper as long as it does not contain any metallic foil or fibers. For highly textured walls or acoustic ceilings, place or tape a thin piece of cardboard onto the surface to be scanned. Recalibrate and scan over the cardboard in DeepScan Mode.

Question: Can I use this scanner to find studs behind carpet?

Answer: No. Zircon scanners are designed for hollow interior walls. They will generally work well to find studs or joists through a plywood subfloor, after the carpeting/flooring has been removed.

Question: Will the A250 work on ceramic tile?

Answer: While the MultiScanner A250 may be able to scan through ceramic tile in DeepScan Mode to locate studs, the many variable layers behind tiled surfaces make it one of the more difficult scanning environments. To find studs through ceramic tile, we suggest using Metal Scan Mode to find the nails or screw heads attaching the backing surface to the studs.

Question: Does this MultiScanner work on lath and plaster?

Answer: Yes. Using Metal Scan Mode, you can identify a stud behind the lath and plaster wall by locating the pattern of nail or screw heads attaching the wood lath to the studs. The nails or screws should be found in a column when scanning for metal. However, if the plaster has metal mesh reinforcement, the MultiScanner A250 will not be able to detect an accurate pattern of nail heads through that material.

Question: What does the Signal Strength Indicator do?

Answer: To help you filter out the target from potential decoys that would give the A250 a false reading, the Signal Strength Indicator gives a reading of the strength, or the certainty, of the returning signal from the wall. Three bars (the highest level) indicates an obvious result behind a normal wall, while two bars (or below) indicates that while the device has found something, it may either be a smaller object than your target, or the target is behind an extra thick wall. Since every wall is built differently, and since any wall can have pipes, wires, or other objects behind it that can return a result, you can use the Signal Strength Indicator to 'map out' your wall to determine the target from the other objects.

Question: Can I use this scanner to scan the outside wall of my house?

Answer: No. Zircon MultiScanners are designed and recommended for interior use only.

Question: I'm planning to mount my new flat screen TV to the wall. Will this scanner help me?

Answer: Yes. The A250 is ideal for basic home or office projects. The center-finding technology allows you to easily find and mark the center of the stud for secure mounting of TV's and AV equipment, closet or garage shelving, heavy mirrors, light fixtures, coat racks and more.

Question: Is the scanner waterproof?

Answer: No. The MultiScanner A250 is splash and water resistant, but not waterproof.

Question: What is the difference between magnetic and electronic stud finders?

Answer: Magnetic stud finders are simply magnets that look for anything magnetic behind a wall. Typically, they are advertised to find screws or nails that hold the wall surface to the studs. However, nails often times are not placed in the center of studs, making it difficult to determine where the stud's center is or how wide the stud is.

Electronic stud finders, such as the A250, on the other hand, operate by detecting density changes behind a surface (like a wall) and will clearly and precisely indicate the edges and center of a stud. The center of a stud is the most secure location when mounting anything heavy. For applications like mapping out floor joists, electronic stud finders have an advantage over magnets because they are not attracted to nails holding floor boards to a subfloor, as well as nails in joists.

Question: Does the MultiScanner A250 come with a warranty?

Answer: The MultiScanner A250 includes limited one year warranty when fulfilled by and shipped from Amazon.

Question: Where can I get help using my MultiScanner A250?

Answer: Zircon's team of Tool Pro Experts provide superior customer service. They know the ins and outs about tools, construction, and the challenges that DIYers and professionals face. Rest assured, at Zircon you can reach live, knowledgeable, honest people who want to work with you.

Zircon also provides support via an online 24/7 interactive support center, step-by-step instructions, how-to videos, and online engagement. Visit Zircon's website today.

Product description

Franklin Sensors has built its reputation on professional-grade stud finders that give you accurate readings. The ProSensor T13 doesn't waste your time with calibration procedures or inaccurate readings. Just press the button and scan to find studs instantly. The handy LED display shows the center and edges of studs.

User questions & answers

Question:	Does it works on concrete
Answer:	110
Question:	does it work on the outside walls that are stucco ? considering that stucco is being hold with the chiken wire
Answer:	Yes it welds with flux core wire. It plugs into a 120 volt outlet. It comes with both flux core wire and solid wire.
Question:	Locates rafters through asphalt shingles
Answer:	This welder will certainly work, in that it will join two pieces of tubing, but you may want to check the race association roll cage rules. I think some race associations require TIG. If so, this is NOT the welder for you.
Question:	what is the difference between prosensor T13 and procensor
Answer:	Supplies is what you need, the Lincoln Mig 140 comes with all the basic parts, and supplies to get you started welding, it comes with two spools of wire, one type of spool wire (0.25) that the MIG 140 comes with, requires the use of C-25 gas bottle from your local welding supply store. You can get started without the gas using the flux core wire that is supplied with the Lincoln MIG 140, Leather welding gloves, a good welding shield helmet protects and help's you better see your work, wire brushes, and welding shirt to help protect you.
Question:	Is it 110 plug or
Answer:	will this work for lincoln 180 hd
Question:	Can this do flux core and plug into a standard 120 outlet
Answer:	The Magnum Pro fits the Lincoln LE31MP welder. For your 140 welder you would want the Magnum model K2532-1.
Question:	can i use this to weld a roll cage into a rally car? serious question im trying to live out my dream
Answer:	This comes with a drive roll for both .035 and .045 wire. It will include 2 tips., the regulator and gas hose.
Question:	what other parts or supplies will i need
Answer:	No, the 350 MP would be the push/pull model.

• 【FOUR DETECTION MODES】 TACKLIFE Wall Scanner located in the center of the wooden pens in exact mode and in depth mode, up to a depth of 20 mm (0.75 inches) and a depth of 38 mm (1.5 inches). Detect ferrous metals up to 100 mm (4 inches) and non-ferrous metals behind walls up to 80 mm (3.15 inches); Live AC Wire mode Locate live cables up to 50 mm (0.75 inches) deep
• 【AUTOMATIC CALIBRATION&AUDIO WARNING】It can be calibrated automatically without having to press the button manually all the time, which is done in a state without nails, AC power cable or metal. The light turns green when the Stud Sensor has been calibrated and is getting ready, as you approach the center, the light turns yellow to red. Meanwhile the detector beeps continuously when the bolt or power cord is found
• 【SMART LARGE LCD SCREEN】This stud finder has a larger LCD display, backlight and 3 signal indicators. And on the LCD screen you can read the information such as mode indicator, metal detection depth, detection signal strength, battery indicator and center point with maximum readability. Equipped with automatic switch-off function- It is automatically switched off if no operation is performed within 5 minutes
• 【VERSATILE AND PRACTICAL DESIGN】The improved ergonomic design of the device makes it easier to hold and use. With portable protective bag. It is a perfect tool for plumbers, carpenters, bricklayers, home renovators, construction workers, electricians, do-it-yourselfers and others who need reliable detection
• 【WHAT’S INCLUDED】 1 x TACKLIFE DMS03 stud finder, 1 x User Manual, 1 x 9V Battery, 1 x Packing Bag, 2 year warranty. Our after-sales customer service is available in any time. Please feel free to contact us for help

User questions & answers

Question:	The wood stud detection mode does not show the wood symbol after pressing the button. The I symbol is showing always. Is this expected
Answer:	Yes... whatever angle you turn it on at it will register that as zero ... so close it completely and turn it on .
Question:	Can this find Plastic pipe in wall with hot water or cold
Answer:	it takes the button style battery number 2032
Question:	Does it say when it detects metal, wood or wire
Answer:	I bought a shorter one about 3 years ago and didn’t come with any case but apart from that I like it.
Question:	Will it find the stud for lath and plaster walls? All I have tested can't, they confused the lath for the stud
Answer:	It keeps spinning, it does go back to 0 degrees when you go past 359.9 deg. and continue to measure. Everyone with a compound miter saw should have this tool!

Product features

TACKLIFE Stud Finder DMS03 blue

TACKLIFE Stud Finder DMS03 blue is used to detect metals (ferrous and non-ferrous metals), wood studs, and “live” AC wires in walls, ceilings and floors. To achieve the best performance of detection, please read this user’s manual carefully and thoroughly before using the tool. Unlike the other stud finder, the TACKLIFE DMS03 has additional function for detecting the center of the stud.

Three indicator lights

• Green: The detector has calibrated automatically and get read
• Yellow: Getting closer to the target
• Red: The center of the sensor was located

Product description

Eliminate the guesswork with this new Dewalt 1-1/2" Stud Finder (DW0150) for wood and metal. While traditional stud sensors locate the edge of the stud, this one locates the center for a more efficient read, even when held at an angle. The sensor is constantly calibrating to save time during use. Once the stud is located, an audible alert and directional LED arrows clearly notify the user. You can easily mark the center of the stud with the center marking channel.

• Center find technology to easily find the center of the stud, even when held at an angle
• Detection depth of 1-1/2 in. for wood and metal
• AC and live wire detection for added safety
• Constant auto-calibration to save time during use
• Center marking channel for added convenience

User questions & answers

Question:	The discription says it's corded-electric no batteries required yet the video shows 2 aaa batteries are required. which is it
Answer:	I don't think so. It's not a bungie cord type of thing. I suppose you could try to wrap it around and attach it, but it would be clumsy.
Question:	Want to drill a hole through the wall but afraid there is a live wire. Will this detect wire
Answer:	Yes, but you worthing have much slack in between. You’d be better buying longer straps and buckles. This product has good reviews but I was underwhelmed. It’s just two nylon straps with plastic buckles on each end that form loops when buckled.
Question:	Will this work with lath and plaster
Answer:	They are about 1 yard long, if not longer.

Product description

The MultiScanner A200 is Zircon’s newest electronic stud finder and metal detector that is sold exclusively on Amazon. The A200 is designed with a smooth, ergonomic rubber grip allowing for a comfortable yet secure hold for any size hand, at any angle. This multifunctional surface scanner uses the most recent technology in density detecting software and circuitry. The Zircon A200 has a 3-mode selector switch making it easy to change functions while the ultra-bright LCD screen, patented SpotLite Pointing System, and audio tone all indicate the location of the target. This Zircon scanner also comes equipped with a Signal Strength Indicator that helps to distinguish between shallow and deep targets. The MultiScanner A200 includes a backlit display for hard to see places and ACT (Auto Correcting Technology) that automatically corrects common user errors, such as when scanning begins over a stud, in addition to a Low Battery Indicator to alert its users to replace its battery for optimal performance results. The tool constantly scans its surroundings and recalibrates itself if necessary. The scanner has 2 stud scanning modes to locate the center, edges, and direction of wood and metal studs and joists behind walls, floors, and in ceilings. In StudScan Mode, the MS A200 scans up to 0.75 of an inch (19 mm) deep. Switch over to DeepScan Mode to double the scanning depth to 1.5 inches (38 mm). Metal Scan Mode locates non-ferrous metal, such as copper pipes, up to 1.5 inches (38 mm) deep and ferrous metal, such as rebar, up to 3 inches (75 mm) deep. Metal Scan Mode finds studs behind lath and plaster walls, tile, drywall and stucco walls by identifying the consistent pattern of screw or nail heads in the studs. The A200 is programmed with a Wire Warning Detection feature that indicates the presence of live, unshielded electrical wires up to 2 inches (50 mm) deep when scanning in all modes. With the Zircon MultiScanner A200, you can safely maneuver through the most complicated of projects with the professional confidence that comes from owning a Zircon.

• The Zircon MS A200 is an electronic edge and center stud finder and ferrous and non-ferrous metal Detector sold exclusively on Amazon Wire warning detection indicates the presence of live, unshielded electrical AC wiring while scanning in all scanning modes
• Act (auto correcting technology) automatically corrects common user errors, I.E. When scanning begins over a stud, as the signal strength indicator help distinguish shallower targets from deeper ones
• Ergonomically designed grip allows a comfortable hold on the tool for any size hand, at any angle while the patented spotlite pointing system clearly indicates the target location
• One fully charged 9V battery, not included, is required for the stud scanner to run at optimal performance to help you easily find studs and metal while avoiding electrical hazards

User questions & answers

Question:	Does this work to detect studs in walls with spray foam insulation
Answer:	Hi. Zircon stud finders and multiscanners are optimized for standard interior drywall construction. Other interior surfaces can be penetrated with our scanners, but brick, slate, and rock type material are too dense. Thanks.
Question:	How is "wirewarning detection" different than "ac scan mode"? both say they find, "live, unshielded electrical ac wires up to 2 inches (50 cm) deep
Answer:	Hi. The packaging you received your A250 in is called "FFP". That stands for frustration free packaging. The other type would be the standard plastic "clamshell". Most folks prefer the FFP. I believe you can purchase the stud finder products either way from Amazon. Thanks.
Question:	does this stud finder come packaged, mine did not is that normal
Answer:	Hello Chris. Due to the variables in building techniques, materials and densities in exterior construction Zircon stud sensors are recommended for interior use only. Our stud sensors locate studs by finding changes in density and the density of the material you mention would not allow the A250 to calibrate properly and as such would prevent it from scanning for the studs. Thank you.
Question:	Will it work with brick walls
Answer:	Hello. The stud finder A250 does not come with a case. Thank you.

Product features

Zircon MultiScanner A200

The MS A200 is a handheld tool dedicated to quickly and efficiently find studs, detect metal and alert you of live AC wiring. The A200 comes equipped with 3 scanning modes: StudScan, DeepScan and Metal Scan.

3 Mode Multifunctional Wall Scanner with Backlit Display

The Zircon MultiScanner A200 makes scanning easy with its newly designed ergonomic grip. The scanner's StudScan finds shallower wood or metal studs up to 0.75 in. (19 mm) deep while DeepScan doubles the scanning depth to 1.5 in. (38 mm).

Metal Scan locates both non-ferrous (non-magnetic) metal, such as copper pipe, and ferrous (magnetic) metal, such as rebar. The A200 is able to detect non-ferrous metal up to 1.5 in. (38 mm) deep, and ferrous metal up to 3 in. (75 mm) deep.

The A200 also includes WireWarning Detection that automatically operates in StudScan, DeepScan and Metal Scan Modes. This safety feature alerts you to the presence of live, unshielded electrical AC wires while scanning for studs and metal.

Before use, always be sure to install a brand new 9V alkaline battery. Zircon stud finders, particularly those with LCD screens, require and consume a great deal of current from batteries. For optimal performance, brand-new, recently purchased alkaline batteries with an extended expiration date, are strongly recommended for use in these tools.

StudScan and DeepScan

Use StudScan Mode to find the center, edges, and direction of wood or metal studs up to 0.75 in. (19 mm) deep.

For best results, always start in StudScan Mode when looking for studs.

If StudScan Mode provides irregular readings, or the Signal Strength Indicator is weak, the studs might be behind deeper than 0.75 in. (19 mm). Slide the Mode Selector Switch to DeepScan Mode. This doubles the scanning depth to 1.5 in. (38 mm) deep and allows for increased accuracy on deeper targets.

Before scanning, hold the A200 flat against wall and press the Power Button to calibrate. Be sure not to move the scanner while calibrating. After a short beep sounds confirming calibration is complete, continue pressing the Power Button and slide the scanner slowly against the surface.

When the A200 finds the edges and center of a stud, 'Edge' and 'Center' displays respectively, indicating you have found your target. When the stud's center is located, the SpotLite Pointer also illuminates and a short beep sounds.

The center of the stud is the stud's most secure location. It is critical to drill in the center of a stud when mounting heavy objects.

Note: WireWarning Detection works in both StudScan and DeepScan Modes. The WireWarning Detection Icon will appear when live, unshielded wires are detected.

Metal Scan

Detect Both Ferrous and Non-Ferrous Metal.

Use Metal Scan Mode to locate and avoid hazards, such as pipes, behind walls and determine if a stud is wood or metal.

Metal Scan Mode detects non-ferrous metal, such as copper pipe, up to 1.5 in. (38 mm) deep, and ferrous metal, such as rebar, up to 3 in. (75 mm) deep.

To use, be sure to first calibrate the A200. For maximum sensitivity, press and hold the Power Button while holding the scanner away from the surface. Once a short beep sounds confirming calibration is complete, place against the surface to be scanned. Be sure to continue to hold the Power Button.

Just like in AC Scan Mode, slowly slide the scanner across the surface and mark the spot where the most display bars peak. Continue scanning until the bars reduce and reverse the direction.

The midpoint between the two marks is the location of the metal target.

Note: WireWarning Detection works in Metal Scan Mode. The WireWarning Detection Icon will appear when live, unshielded wires are detected.

WireWarning Detection

Be Alerted of Live Electrical Wiring in all Modes.

WireWarning Detection is a feature that is always on while scanning in StudScan, DeepScan, and Metal Scan Modes.

It alerts you to the presence of live, unshielded electrical AC wires up to 2 inches (50 cm) deep.

As you approach an area with live AC voltage, a lightning bolt icon will display on the LCD screen. This the WireWarning Detection Icon. If your scan directly starts over an area with live AC voltage, the WireWarning Detection Icon will flash.

Note: Please turn off the electricity and use extreme caution in areas where live AC voltage is detected before nailing or drilling.

Auto Correcting Technology (ACT)

Automatically Have Common Errors Corrected.

This feature enables the scanner to automatically adjust for common calibration errors. It checks calibration 10 times per second and automatically recalibrates when/if needed. If scanning begins directly over a stud, the tool will transparently recalibrate, so you don't have to, and will find that stud when you scan back over it.

This recalibration is usually transparent and no indication is made. If an arrow icon illuminates, the scanner was calibrated near or over a stud and then moved away. The arrow indicates the direction of the missed stud.

Frequently Asked Questions

Question: Does the MultiScanner A200 include a battery?

Answer: No. Zircon stud finders and detectors, particularly those with LCD screens, require and consume a great deal of current from batteries. For optimal performance, a brand-new, recently purchased 9V alkaline battery with an extended expiration date, is not included but is required to properly power the A200.

Question: I inserted a 9V battery, but the scanner doesn't turn on or is giving me strange readings. Is my scanner broken?

Answer: Please be sure to use a fresh, brand new 9V alkaline battery with an extended expiration date. Batteries that may work in a smoke detector or remote control may not have adequate voltage to power the sensing technology in MultiScanners.

Question: Does this scanner need to be calibrated?

Answer: Yes, as with all Zircon scanners, the MultiScanner A200 needs to calibrate to the surface before scanning. Calibrating the scanner on an empty wall gives the device a chance to measure the wall thickness and material density, as well as register factors like humidity, temperature, and even the minor electric readings from your hand, which all have an impact on the readings from the wall. Calibrating is easy and just takes a second. To calibrate, simply place the unit flat against the surface to be scanned and press the Power Button. When powering the A200 on, all the icons on the screen and the SpotLite Pointing System will briefly flash and the scanner will beep. After this occurs, the screen will then clear and, depending on the selected mode, the words 'StudScan', 'DeepScan' or 'Metal' will remain, indicating that calibration has occurred and the scanner is ready to begin scanning. It is important not to move the scanner or begin scanning until the calibration process has taken place for the most accurate results.

Question: What does 'Center Finding' mean?

Answer: Center Finding stud finders locate both the edges and the center of wood and metal studs and joists in one step. 'Edge Finding' stud finders, on the other hand, only find the edges of studs, so you must determine the center. Finding the center of the stud to mount heavy objects is critical as the stud's center is the most secure location of the stud.

Question: What is DeepScan Mode?

Answer: Unlike StudScan Mode, which scans through one layer of drywall up to 0.75 in. thick (19 mm), DeepScan Mode scans through 2 layers of drywall up to 1.5 in. (38 mm) deep. DeepScan Mode is a higher sensitivity scanning mode that should be used when there are extra layers of wallboard or paneling. Extra layers in a wall can make it difficult to find studs in regular StudScan Mode. To minimize false positives and/or finding other objects further behind the wall that may not be a stud, always start your scan in StudScan Mode first.

Question: How can I be certain the objects found behind my wall are studs in DeepScan Mode?

Answer: DeepScan Mode has increased sensitivity so you may have located something other than a stud. Studs are equally spaced to either side (12, 16, or 24 in. apart) and typically run from floor to ceiling. To better confirm that what you found is a stud, check for other studs equally spaced to either side and for the same stud at several heights directly above and below the first stud indication. A stud reading would also measure approximately 1.5 in. (38 mm) apart from each edge. Anything larger or smaller may not be a stud if not near a door or window.

Question: Will this MultiScanner A200 locate metal studs?

Answer: Yes, the A200 will locate metal studs in StudScan, DeepScan, and Metal Scan Modes. Since stud finders are looking for a change in density behind drywall, not a particular material, in StudScan, DeepScan, and Metal Scan Modes, the detector will react to metal studs the same as it would for wooden studs. The A200 will locate wood and metal studs up to 0.75 in. (19 mm) deep while DeepScan Mode locates targets up to 1.5 in. (38 mm) deep. In Metal Scan Mode, the detector will only detect metal studs, in addition to any other metal, within its specified scan depth and range.

Question: Why does the scanner beep and the lights flash when scanning for a stud?

Answer: The scanner could've been calibrated over a stud, calibrated on a dense part of the wall, or the back of the unit may have slightly lifted or tilted during the scan. Move the MultiScanner A200 over a couple of inches to the left or right, re-calibrate, and start your scan again.

Question: What is WireWarning Detection?

Answer: WireWarning Detection is a feature that is always on while you are scanning in StudScan, DeepScan, and Metal Scan Modes to alert you to the presence of live, unshielded electrical AC wires up to 2 in. (50 mm) deep. As you approach an area with live AC voltage, a lightning bolt icon will display on the LCD screen. This is the WireWarning Detection Icon. If your scan directly starts over an area with live AC voltage, this icon will flash. Please turn off the electricity and use extreme caution in areas where live ac voltage is detected before nailing or drilling.

Question: Why does the area of voltage appear much larger than an actual wire?

Answer: Static charge may develop on drywall, spreading voltage detection as much as 12 in. (30 cm) laterally from each side of an actual wire. To narrow detection, turn the scanner off and on again at the edge of where the wire was first detected and repeat the scan.

Question: I suspect electrical wires in a certain area when I scan, but why am I not detecting any?

Answer: Wires may be shielded in metal conduit or behind a metallic wall covering. It could also be that the wire is deeper than 2 in. or that the wire may not be live (hot). Try Metal Scan Mode to see if you can find metal, wire, or metal conduit. Always exercise extreme caution when working near electricity.

Question: Does the A200 work on wood paneling and other wood surfaces?

Answer: The A200 is optimized to scan through standard interior sheetrock / drywall (gypsum) construction. This scanner will work on wood, plywood, wood paneling and particle board up to 1.5 in. (38 mm) thick when in DeepScan Mode.

Question: Will the A200 work on textured wall surfaces, acoustic ceilings, or wallpaper?

Answer: Yes, the A200 will work on textured surfaces and dried wallpaper as long as it does not contain any metallic foil or fibers. For highly textured walls or acoustic ceilings, place or tape a thin piece of cardboard onto the surface to be scanned. Recalibrate and scan over the cardboard in DeepScan Mode.

Question: Can I use this scanner to find studs behind carpet?

Answer: No. Zircon scanners are designed for hollow interior walls. They will generally work well to find studs or joists through a plywood subfloor, after the carpeting/flooring has been removed.

Question: Will the A200 work on ceramic tile?

Answer: While the MultiScanner A200 may be able to scan through ceramic tile in DeepScan mode to locate studs, the many variable layers behind tiled surfaces make it one of the more difficult scanning environments. To find studs through ceramic tile, we suggest using Metal Scan Mode to find the nails or screw heads attaching the backing surface to the studs.

Question: Does this MultiScanner work on lath and plaster?

Answer: Yes. Using Metal Scan Mode, you can identify a stud behind the lath and plaster wall by locating the pattern of nail or screw heads attaching the wood lath to the studs. The nails or screws should be found in a column when scanning for metal. However, if the plaster has metal mesh reinforcement, the MultiScanner A200 will not be able to detect an accurate pattern of nail heads through that material.

Question: What does the Signal Strength Indicator do?

Answer: To help you filter out the target from potential decoys that would give the A200 a false reading, the Signal Strength Indicator gives a reading of the strength, or the certainty, of the returning signal from the wall. Three bars (the highest level) indicates an obvious result behind a normal wall, while two bars (or below) indicates that while the device has found something, it may either be a smaller object than your target, or the target is behind an extra thick wall. Since every wall is built differently, and since any wall can have pipes, wires, or other objects behind it that can return a result, you can use the Signal Strength Indicator to 'map out' your wall to determine the target from the other objects.

Question: Can I use this scanner to scan the outside wall of my house?

Answer: No. Zircon MultiScanners are designed and recommended for interior use only.

Question: I'm planning to mount my new flat screen TV to the wall. Will this scanner help me?

Answer: Yes. The A200 is ideal for basic home or office projects. The center-finding technology allows you to easily find and mark the center of the stud for secure mounting of TV's and AV equipment, closet or garage shelving, heavy mirrors, light fixtures, coat racks and more.

Question: Is the scanner waterproof?

Answer: No. The MultiScanner A200 is splash and water resistant, but not waterproof.

Question: What is the difference between magnetic and electronic stud finders?

Answer: Magnetic stud finders are simply magnets that look for anything magnetic behind a wall. Typically, they are advertised to find screws or nails that hold the wall surface to the studs. However, nails often times are not placed in the center of studs, making it difficult to determine where the stud's center is or how wide the stud is.

Electronic stud finders, such as the A200, on the other hand, operate by detecting density changes behind a surface (like a wall) and will clearly and precisely indicate the edges and center of a stud. The center of a stud is the most secure location when mounting anything heavy. For applications like mapping out floor joists, electronic stud finders have an advantage over magnets because they are not attracted to nails holding floor boards to a subfloor, as well as nails in joists.

Question: Does the MultiScanner A200 come with a warranty?

Answer: The MultiScanner A200 includes limited one year warranty when fulfilled by and shipped from Amazon.

Question: Where can I get help using my MultiScanner A200?

Answer: Zircon's team of Tool Pro Experts provide superior customer service. They know the ins and outs about tools, construction, and the challenges that DIYers and professionals face. Rest assured, at Zircon you can reach live, knowledgeable, honest people who want to work with you.

Zircon also provides support via an online 24/7 interactive support center, step-by-step instructions, how-to videos, and online engagement. Visit Zircon's website today.

• GREAT ACCURACY AND CONSISTENCY - Tavool stud finder is professionally designed! Tavool stud finders uses the UPGRADE INTERNAL SENSORS. It senses a change in density in the space behind the wall and locates the stud center with GREAT ACCURACY. In additions. The shape of this wall scanner also shows the edges of the stud. The center of a stud is the most secure location when mounting anything heavy. The edges help you to recheck the locations. Take it home, makes your DIY homework easier!
• 5 SCANNING MODES UP TO 60MM DEPTH - Tavool stud locator has mufti-fuctions and can quickly and easily locates wood metal studs joists beams metal pipe rebar and live AC wire behind walls, floors, and ceilings. StudScan Mode scans through one layer of drywall up to 0.5 in.（12mm) and 1 in . (25mm) thick. DeepScan Mode scans through 2 layers of drywall up to 1.5 in. (38 mm) deep. Deep Stud Scan Mode is a higher sensitivity scanning mode that should be used when there are extra layers of wallboard
• WIRE WSRNNING INDICATOR, NO FEAR OF DRILLING INTO A LIVE WIRE - WireWarning Detection is up to 2 in.(51mm) deep. The added bonus is that the wire warning is ALWAYS ON while you are scanning in StudScan/DeepScan/MetalScan Modes, to alert you to the presence of live, unshielded electrical AC wires up to 2 in. (50 mm) deep, which helps you avoid drilling or hammering into a water pipe or electrical wire.Whether you are a professional, homeowner or a DIY enthusiast, you can find great use in it
• EASY TO READLCD DISPLAY +SOULD WARNING HELPS FIND STUD CENTER AND STUD DEGES EASILY - Displaying the Desired Stud Center As Well As the Precise Position of the Stud - The Tavool digital stud detector features large LCD display together with the big sound warning to detect the accurate location of the objects. When find the material, the LCD display will indicate the direction and the intensity of beeping tells whether you are more close to the target. The fast detection saves users time greatly
• WHY RECOMMEND TAVOOL STUD FINDER TO YOU: Tavool has been dedicated to Research and develop stud finders for many years, and we have a professional team and mature productions process. Tavool stud finder not only gives you top quality and great accuracy, but also provide muti-functions to meet your practical needs on drywall, lathe wall, ceiling, plasterboard wall, wallboard etc.

Product features

Stud Scan Detection

This stud locator has 3 stud scan modes. Deep Scan Mode scans through 2 layers of drywall up to 1.5 in. (38 mm) deep. DeepScan Mode is a higher sensitivity scanning mode that should be used when there are extra layers of wallboard or paneling. To minimize false positives and/or finding other objects further behind the wall that may not be a stud, always start your scan in StudScan Mode first.

Metal Scan Detection

Tavool wall canner will locate metal studs in StudScan, DeepScan, and Metal Scan Modes. Since Tavool stud finders are looking for a change in density behind drywall, not a particular material, in StudScan and DeepScan Modes the detector will react to metal studs the same as it would for wooden studs.

After you detect the center of a object, Please Use Metal Scan to determine if the previous reading in Stud scan was a wood stud, metal stud, or pipe.

Wire Warning Detection

Wire Warning detection indicates the presence of live, unshielded electrical wiring up to 2 inches (51 mm) deep. For Safety, in all modes, this wall scanner always detect and indicate the Live AC Wire.

Note: WireWarning Detection works in both StudScan / DeepScan / MetalScan Modes. The WireWarning Detection Icon will flash when live, unshielded wires are detected.

Step 1:Calibrate the tool before every scan

After choose the mode, press and hold the scan button( on the side of the tool) to calibrate this tool. Wait for the reducing bars disappeared and beep to confirm calibration has completed.

In stud/deep mode, put it on the wall where you want to detect to calibrate it ;In AC/Metal mode, put it in the air to calibrate it.

Step 2: Scan the wall

Hold down the button, then move the stud finder along the wall slowly, if shake or lift the scanner accidently, the device needs to be re-calibrate.

The narrow on the screen togather with the beep signal alter, guides you to find the location of the stud.

Step 3: Find the location of the stud

When the signal bar is full and the beep alarm is loudest, it means you have found the center of an object.Mark it with your pencil.

Then choose the Metal Scan mode to test whether it is a metal. After you confirm that it is not a metal, it means that you found the center of a stud. (More details refer to the above description of "Metal Scan Detection")Then you can drill it to hang thing

• Complete with the Latest Technology & More Accurate than Standard Stud Finders- MERECE stud finder wall scanner is launched after testing and upgrades for years. This wall detector adopts the most Advance Sensors Technology for accurately & quickly locating studs wood metal AC wires! In all modes, this wall scanner always detect and indicate the Live AC Wire. Whether you are a professional, homeowner or a DIY enthusiast, you can find great use in this electronic stud scanner
• 5 SCANNING MODES UP TO 60MM DEPTH - Merece stud locator has mufti-fuctions and can quickly and easily locates wood metal studs joists beams metal pipe rebar and live AC wire behind walls, floors, and ceilings. StudScan Mode scans through one layer of drywall up to 0.5 in.（12mm) and 1 in . (25mm) thick. DeepScan Mode scans through 2 layers of drywall up to 1.5 in. (38 mm) deep. Deep Stud Scan Mode is a higher sensitivity scanning mode that should be used when there are extra layers of wallboard
• Upgrade Design of LCD Screen - Displaying the Desired Stud Material As Well As the Precise Position of the Stud - The Merece digital stud scanner features large LCD display together with the big sound to detect the accurate location of stud metal Ac wires. When find the material, the LCD display will indicate the direction and the intensity of sound tells whether you are more close to the target. The fast detection saves users time and efforts, making the task completion EASIER
• Automatic Calibration and Ergonomic Grip for Comfortable Use - Turning on the stud finder and Completing Calibration. The automatic calibration before using provides users with maximum reliability and accuracy. Then put it on the wall. The wood beam finder will flash once it has picked up the edge of a stud.The ergonomic design of this wall stud finder makes it comfortable to hold from any angle
• Professional Design with Top Quality - Merece has been dedicated to Research and develop stud finders for many years, and we have a professional team and mature productions process. This stud joist finder wall detector can quickly locate the metal wood AC wire that are hidden in the walls, floors and ceilings of your house, help you find the exact stud while installing TVs, cabinets, garage shelves etc.

User questions & answers

Question:	Will it work on a 2x4 corner stud
Answer:	when I first got the device I tested it and it found every stud (including a corner stud). I have been please with its performance.
Question:	has anyone used it to detect wires and pipes
Answer:	my husband only tried it on the studs, I will get him to try it on the wires and pipes and let you know what the results are.
Question:	Will this product find the location of floor joists through 3/4 inch plywood floor sheathing
Answer:	Yes it does
Question:	Where is this made
Answer:	It is made in China

• Reliability and Consistency: 2019 latest stud finder with multi-sense technology which can accurately and quickly find edges and center of metal, studs, joists, pipes, live AC wire behind walls, floors and ceilings. Whether you’re hanging a picture, mounting a TV, renovating part of your home, Jurgen K stud finder is a must-have tool you need.
• 5 in 1 Multi-function Detection: The upgraded 5-in-1 mode provides users with more detection needs. The stud scan features 5 mode: 1/2 inch(13 cm), 1 inch (25 mm) and 1.5 inch (38 mm), Metal scan (60 mm)and AC scan (51 mm). Fast detection saves users time and effort, making the task completion easier. No matter professionals, homeowners, and DIY enthusiasts, it must be an ultimate choice.
• High Performance: Easy-to-read LCD screen displaying the desired stud material as well as the precise position of the stud. when the device detects an object, it will beep continually and a peck shape will also display on the LCD screen. This wall scanner features a bright, backlit LCD display and a low battery indicator informing you when your battery should be replaced for optimum performance (include 9V battery).
• Ergonomic Grip & Auto Calibration: The ergonomic anti-slip grip and top-grade plastic frame provide users with comfort and convenience while scanning. calibration before using provides users with maximum reliability and accuracy. Firstly place it flat on the wall, secondly, turn on the Power Button, then hold the Scan button to start calibration, It is completed when the BEEP sound and screen shows disappear.
• This stud detector quickly locates wood, metal and AC wires hidden in the walls, floors, and ceilings of the house. It can work on different wall surfaces, such as lath, wallpaper wood flooring, acoustic ceiling, painted walls, etc. helping you avoid danger when installing TVs, cabinets, garage racks, etc.

User questions & answers

Question:	If there's a live wire, what does that look like on the display screen
Answer:	It couldn't locate studs through an inch of sheet-rock so i would bet no.
Question:	Will the TH530 work on textured wall surfaces, acoustic ceilings, or wall paper
Answer:	Yes, it work well on popcorn ceilings
Question:	I'm planning to mount my new flat-screen TV to the wall. Will this tool help me
Answer:	Yes, i found the wires in the wall with this device.
Question:	Will this stud finder locate metal studs
Answer:	Yes, it is accurate and easy to use. with this stud finder, I was able to install my new TV mount at ease.