8 best amico drills

• Top Rated 6 Inch 5CCT Slim LED Downlight with Junction Box
• 5 CCT: 2700K, 3000K, 3500K, 4000K, 5000K, 5 color temperature selectable, no need to worry about what color temperature to buy, eliminates the hassle of returning or exchange products due to inappropriate color temperature.
• IC Rated: Amico's canless LED recessed light is IC rated, which is permitted to be in contact with insulations in ceilings, meaning the junction box is thermally protected. It only requires as small as 2 inches ceiling spaces, fits various ceilings, and joists. It won't cause a fire in the roof or overhead joist space.
• High Brightness: The 6inch slim downlights use the world's leading LED chips with higher lumens and lower power. 1050LM consumes 12 Watts, which equals to 110W halogen lamp, saving you up to 90% in energy costs.
• Amico Benefits: 5-Year Warranty! The whole Amico's recessed lighting is certified by ETL & Energy Star of a high standard.

User questions & answers

Question:	How big a mounting hole does it need to install？Do I have to install a can
Answer:	Dear Amazon Customer, Our downlights are come with junction box and easy to install and don't need a CAN.About the hole, you can cut a 6.2" - 6.5" hole in the ceiling. (Advised hole cutout size: 6.25") Kind regards! Amico-usa
Question:	How long will this product last
Answer:	Dear Amazon Customer, Normally it can last 50000 hours,and we provide a 5 years warranty. Any further questions, please kindly clik this link https://amzn.to/31xnELD to contact us, we are more than happy to help you! Kind regards！ Amico-usa
Question:	What is the difference between the 3000K & 5000K
Answer:	Dear Amazon Customer, We have five colors to choose from. 2700K is Soft White, similar to sunsets and candlelight, for bedrooms and hotels; 3000K is Warm White, suitable for bathrooms, kitchens and restaurants; 3500K is Neutral White, suitable for offices and shops; 4000K is Cool White, for Garages and Grocery Stores; 5000K is Daylight, for warehouses, sport stadiums, hospitals, ER rooms and other industries where the brightest light is needed to perform tasks correctly. Anyway, you can choose one of the five color temperaments to decorate your house or company according to your preference.The color switch is on the junction box. Kind regards! Amico-usa
Question:	What dimmers does this product support
Answer:	Dear Amazon Customer, Here are some Highly Adaptable Dimmer which you can search directly on Amazon: Lutron: GT-600P, TGCL-153P, DVCL-153P, MSCL-OP153M, PD-6WCL, MACL-153M//MA-R Leviton: RNL06, IPL06, DSL06 Kind regards! Amico-usa

Product description

ARC-200 is a professional Stick Arc with Lift-TIG welding machine using the advanced inverter technology. The welding power source can provide a stronger, more concentrated and more stable arc. When the stick and work-piece become shorter, the response will be faster. This means it is easier to design it as a welding machine with different dynamic characteristics, and it can even be adjusted as needed to make the arc softer or harder. Specifications: Model: ARC-200; Rated Input Voltage: AC 100~250V; Frequency: 50~60Hz; Rated Input Power: 230V/8.2KVA/35.7A & 115V/5.8KVA/50A; Current Range: 230V/5~200 Amp & 115V/5~145 Amp; Force Current: 0~50 Amp & 0~10 Amp; Rated Duty Cycle, 230V: 80% @ 200 Amp & 115V: 80% @ 145 Amp; Nominal DC Open Circuit Voltage: 83V; Usable Electrode, 230V: 1/16~1/4 in. & 115V: 1/16~5/32 in.; Power Factor: 0.93; Dimension: 15.75 x 6.2 x 11.3 in.; Net Weight: 17.0 lbs.; Packaging Size: 18.0 x 9.5 x 12.5 in.; Packaging Weight: 24.0 lbs. Packing List: ARC-200 Pro. Stick Arc Welding Machine; 8-feet Power Cord & 6-50P plug (on the machine); 230V to 115V Power Adapter; 300 Amp Electrode Holder, 10 feet Cable, 35-50 mm Connect; 300 Amp Work Clamp, 10 feet Cable, 35-50 mm Connect; 2 Pieces Electrode of 3/32 in.; 2 Pieces Electrode of 3/16 in.; Owner’s Manual.

• ARC-200 is a professional Stick Arc and Lift-TIG combo welding machine with an industrial level design. It is compatible with all electrodes: E6010, E6011, E6013, E7014, E7018, etc. The machine has an excellent Lift-TIG arc welding function; 5-200A comfortably welds thin stainless steel and other various metals.
• Automatic selection feature detects input voltage automatically, allowing you to easily switch between 100~250V/50~60Hz input power. Almost all of the voltages and frequencies can be used. Adjustable arc force settings allow you to meet your custom welding needs.
• Incorporates advanced IGBT inverter technology with superior arc characteristics and has excellent arc stability. 80% duty cycle at 200 amps ensures long time welding and the machine can still work normally with an extended power cord up to 700 feet. The power cord can resist power fluctuations and cable attenuation at any length.
• ARC-200 has very powerful functions, making it easy to start and use. The machine has a built-in hot start function, anti-stick function, thrust adjustment function, current-intensity control function, and automatic compensation for voltage fluctuations: over-voltage protection, under-voltage protection, over-current protection, and over-load protection.
• ARC-200 Stick Arc with Lift-TIG can achieve the perfect weld. It is a welding machine of the highest level; the strength of its components makes it a reliable work tool for professionals or individuals. Package includes 7 feet of power cord, 10 feet of 300-Amp electrode holder assembly, 10 feet of 300-Amp grounding clamp assembly, and a 230V to 115V power adapter.

User questions & answers

Question:	How thick of metal can this welder weld
Answer:	General household for welder
Question:	Will a 250V 50A breaker not work this unit
Answer:	it is 110V&220V arc welder
Question:	does the fan always stay on
Answer:	yes,it can
Question:	which end of the power cord plugs into the machine
Answer:	It is hot start. Amperage can be adjusted according to your application( meaning depending on the material to be welded and the size of the electrode). U just welded with 3/32 elextrode and it did an outstanding job. It melted the electrode beautifully. ( Hola Cindy. You have to hire me as a reviwer of your welders). I am an independent user
Question:	So what size wire and breaker do you need to run to run this unit
Answer:	Mine came with the accessories. Best put in a claim.
Question:	Is this a welder or a plasma cutter
Answer:	I think it would probably soften old putty - but I would be very careful not to crack the glass. It can get very hot.
Question:	can you run this welder of a regular 5000 watt generator
Answer:	Yes, I believe this heat gun is powerful enough to melt pvc pipes, on the high heat setting you can actually solder domestic copper pipe so I assume it would heat pvc to the point it would ignite.
Question:	if this has hot start, what percent of the Amp setting it's set at? Arc Welding machine
Answer:	Yes it will. It’s the reason I bought this one and it works great.

Product features

WELDER

Feature:

1 Energy-saving and stable heat dissipation ：Whole day welding is no problem,energy-saving design,it is applicable for welding all kinds of ferrous metals such as carbon steel, medium carbon steel and alloy steel amongst others

2 IntuitiveFeaturing controlling knob,convenient：Portable size but big power,it's not just a welding machine but a work of art.

3 Suitable for welding stainless steel, mild steel and other metal materials. Arc welding machine is easy to use,beginner can also operate well.

4 Over-heating protection, over-voltage protection, over-current protection.The welding voltage can be continue adjusting to exactly match welding current.

5 Convenient quick connection for the output makes it quick, safe, simple.On-off frequency is out of audio frequency,nearly abate the noise pollution

Special welding dynamic characteristic control the circuit,stable welding arc

Little spatter,good welding surface,high welding efficiency

ARC WELDING MACHINE

The machine is equipped with high-efficiency and low-cost cutting technology, can be widely used in automobile manufacturing, plumbing work, metal processing ,strict construction work, site work, high-quality welding and thin material precision welding.

HIGH EFFICIENCY FAN

High-performance fully mute fan motor with instant cooling function, promote body heat dissipation, The synchronous control system provides protection mechanisms.

Product description

ARC-160 is a professional Stick Arc with Lift-TIG welding machine using the advanced inverter technology. The welding power source can provide a stronger, more concentrated and more stable arc. When the stick and work-piece become shorter, the response will be faster. This means it is easier to design it as a welding machine with different dynamic characteristics, and it can even be adjusted as needed to make the arc softer or harder. Specifications: Model: ARC-160; Rated Input Voltage: AC 100~250V; Frequency: 50~60Hz; Rated Input Power: 230V/6.7KVA/29.3A & 115V/4.7KVA/41A; Current Range, 230V: 5-160 Amp & 115V: 5-130 Amp; Force Current: 0-50 Amp & 0-10 Amp; Rated Duty Cycle, 230V: 80% @ 160 Amp & 115V: 80% @ 130 Amp; Nominal DC Open Circuit Voltage: 83V; Usable Electrode, 230V: 1/16~5/32 in. & 115V: 1/16~1/8 in.; Power Factor: 0.93; Dimension: 14.1 x 6.2 x 11.3 in.; Net Weight: 14.0 lbs.; Packaging Size: 16.0 x 9.5 x 12.5 in.; Packaging Weight: 20.0 lbs. Packing List: ARC-160 Pro. Stick Arc Welding Machine; 8 feet Power Cord & N6-50P plug (on the machine); 230V to 115V Power Adapter; 200 Amp Electrode Holder, 10 feet Cable, 35-50 mm Connect; 200 Amp Work Clamp, 10 feet Cable, 35-50 mm Connect; 2 Pieces Electrode of 3/32 in.; 2 Pieces Electrode of 1/8 in.; Owner’s Manual.

• ARC-160 is a professional Stick Arc and Lift-TIG combo welding machine with an industrial level design. It is compatible with all electrodes: E6010, E6011, E6013, E7014, E7018, etc. The machine has an excellent Lift-TIG arc welding function; 5-160A comfortably welds thin stainless steel and other various metals.
• Automatic selection feature detects input voltage automatically, allowing you to easily switch between 100~250V/50~60Hz input power. Almost all of the voltages and frequencies can be used. Adjustable arc force settings allow you to meet your custom welding needs.
• Incorporates advanced IGBT inverter technology with superior arc characteristics and has excellent arc stability. 80% duty cycle at 160 amps ensures long time welding and the machine can still work normally with an extended power cord up to 700 feet. The power cord can resist power fluctuations and cable attenuation at any length.
• ARC-160 has very powerful functions, making it easy to start and use. The machine has a built-in hot start function, anti-stick function, thrust adjustment function, current-intensity control function, and automatic compensation for voltage fluctuations: over-voltage protection, under-voltage protection, over-current protection, and over-load protection.
• ARC-160 Stick Arc with Lift-TIG can achieve the perfect weld. It is a welding machine of the highest level; the strength of its components makes it a reliable work tool for professionals or individuals. Package includes 7 feet of power cord, 10 feet of 300-Amp electrode holder assembly, 10 feet of 300-Amp grounding clamp assembly, and a 230V to 115V power adapter.

User questions & answers

Question:	What is the dinse connector size is this welder? I’m trying to buy longer leads for it please help me
Answer:	for this dual voltage(90v-260v)arc welder duty cycle is about 85%
Question:	What is the largest thickness of metal 160D can weld
Answer:	My guess would be yes.
Question:	This machine it work in 220 volts
Answer:	You can make a cord with the four prong male to a 3 prong female. You plug the welder into 3 prong and the male 4 prong to dryer outlet. You need to only connect 3 wires on the 4 prong. The ground and x and y, the z is for 110v used by the dryer for the control panel and the light. So this does not get hooked up. You can use 3 prong plug in a 4 prong outlet but you can’t do the reverse. Hope this helps.
Question:	Can i plug this to a 110 v out let
Answer:	this arc welder better for Welding 7018 1/8″ , 6013 and 7018 3/32″

• Super Bright & Energy Saving: 3 super bright LED light heads with die-casting aluminum material, produce up to 3500lm high brightness output and good heat dissipation. Save your electricity bill by up to 80%.
• Adjustable Design & Easy Installation: Easy to adjust the 3 light heads to different angle as your requirement. Install the corded light by mounting to a junction box with a few simple wiring steps, then connect a switch to turn on/off the light.
• IP65 Waterproof: IP65 waterproof rating ensures that your triple head security light fixture won’t give in in rain, sleet or snow weather. Perfect for entryways, stair, yard, garage,workshops, studio and large area lighting requirements.
• ETL-Certified & Long-Lasting: With an long life rating of 50,000 hours, lasting and consistent in good performance. ETL- Certification for outstanding quality standards provide efficient lighting and adds extra safety for your house.
• Warranty Policy: We promise a 5-year warranty . Our customer service team are 7*24 online. Your Satisfaction is our first priority!

User questions & answers

Question:	Can I add a dimmer switch to this light,so that it become dimmable
Answer:	Thanks for your question on Amico led security light. I don't recommend you do so.It can be dangerous and the light can be damaged.
Question:	Can the light be mounted under my eave
Answer:	Thanks for your question on Amico led security light. This light can be wall-mounted and eave-mounted. However the light direction may be somewhat limited when eave mount. I personally recommend wall mount.
Question:	How can I get to the Service Team,if the light has any problem
Answer:	Thanks for your question on Amico led security light. Our customer service team are 7*24 online.You can contact us via Amazon by clicking this link https://amzn.to/3fyySn2 at any time.We promise 2 year warranty,accordung to your problem we will provide replacement or refund.
Question:	Is it rainproof？Can I install it outdoor
Answer:	Thanks for your question on Amico led security light. This light use high quality material and hat IP65. It can stand heavy rain, sleet or snow, ensure it can work normally outdoor,perfectly as a outdoor lighting.

Product features

3 Flexible Heads

This LED security light has 3 adjustable head, you can rotate them to a positon according your need, so you can customize your lighting area.

Ultra-Bright LED Chips

Amico high quality LED Chips outputs 3500lm and 5000K high brightness (daylight white), but consumes only 30W, which is equivalent to 200W halogen light, which can save up to 80% electricity bill.

Full Aluminum Back

The exquisite aluminum head is corrosion & rust resistant and won’t faded even for decades. The excellent heat disspation ensures the light more durable for a 50000-hour long life span.

IP65 Waterproof

The professional waterproof certification ensures safety for outdoor use, protecting light from rain, sleet or snow. Perfectly for indoor&outdoor installation.

Easy Installation

This light can be easily installed by mounting to a wall and following a few simple wiring steps in only 5 minutes. Just be an electrician yourself, cut down expenses.

Switch Controlled

This LED security light is switch controlled, just install it and control it on/off by a switch.

• EXCELLENT BRIGHTNESS: LED outside security light with 3 heads offer 56 LED units, 50 watt led flood lights produce up to 5000lm high brightness output and good heat dissipation. Saving over 80% on your electricity bill. Providing efficient lighting for your exterior living environment and adds extra safety to your home.
• ADJUSTABLE DESIGN & EASY INSTALLATION: Easily adjust the 3 light heads to different angle as your requirement. Install the corded light by mounting to a junction box with a few simple wiring steps, then connect a switch to turn on/off the light.
• IP65 WATERPROOF SECURITY OUTDOOR LIGHTS: IP65 waterproof rating ensures that your 3 head security light fixture can withstand rain, sleet or snow weather, which is perfect for Entryways, Stairs, Yard, workshops, and large area lighting requirements.
• METAL MATERIAL & EFFICIENT COOLING: This wall mount security light is made of die-cast aluminum, which has more efficient heat dissipation and can extend lifespans.
• EASY INSTALLATION: Install the light by mounting to a junction box with a few simple wiring steps, then connect a switch to turn on/off the light.

User questions & answers

Question:	Do these have glass or plastic lens
Answer:	plastic. Very bright lights.
Question:	Can I wire this to a motion sensor
Answer:	Dear Customer,  Thanks for your question. We also sell Onforu 50W LED Security Lights with Motion Sensor. You could find it with the Asin: B07SCXVMZ4 Hope it will help you.  All the best wishes!  Customer Service Team
Question:	Are these UL listed
Answer:	Although with a product this well made you would think that it is UL listed, I never saw the symbol/label on their product or pacakaing.
Question:	Do the three panels provide equal output, or does center provide more light
Answer:	Dear Customer, Thanks for your kind question. The center panel is 30w, the other 2 panels are 10w. The center could provide more light. Hope it will help. Service Team

Product features

Doorway

Garden

Garage

Product description

You can weld Stainless steel, Alloy steel, Mild steel, Copper, Cast Iron and Chrome. Powerful welder capable of welding up to 1/2" Stainless steel, Alloy steel, Mild steel, Copper, Cast Iron and Chrome. The full-size TIG & Stick platform, outperforming the competition on arc quality, voltage control, duty cycle and value.  This is optimized to deliver a flawless weld, making spatter and post-weld cleanup almost non-existent.  Dual Voltage Input (110V/230V) means you can plug into any common power supply.  TIG torch & cable 13ft, Electrode holder & cable 300A /10ft, Work clamp & cable 300A /10ft. All machines tested in the USA, One year warranty. TIG-200DC is a rectifier adopting the most advanced inverter technology. Welding power source can offer stronger, more concentrated and more stable arc. When stick and work piece get short, its response will be quicker. It means that it is easier to design into welding machine with different dynamic characteristics, and it even can be adjusted for specialty to make arc softer or harder. The machine can be for multi-use, and can weld stainless steel, carbon steel, copper and other color metal, and also can use for traditional electric welding. Specification Processes: TIG (GTAW), STICK, ARC, MMA Input Power: 110/230V/1phase/60Hz Output Range: DC 20-200 Amps Input Current: 37A(110V) & 34.3A(230V) Rated Output: 25V & 28V Duty Cycle: AC 230V/200A@60% & AC 110V/150A@60% Dimensions: 16.6 x 7.5 x 11.8 inch Product Weight: 15.5 Pounds What’s Included TIG-200DC TIG/Stick/ARC Machine Professional TIG Torch Gun and Assembly 13 feet Electrode Holder and cable10 feet Work Clamp and cable10 feet 110V and 230V Transfer Plug 2 pieces of Electrode 1/8 in. 2 pieces of Electrode 3/32 in. 2 pieces of Tungsten 5/64 in. Instruction Manual.

• Multifunction: TIG / STICK / ARC 2-in-1 Welder
• Powerful welder capable of welding up to 1/2" Stainless steel, Alloy steel, Mild steel, Copper, Cast Iron and Chrome.
• The full-size TIG & Stick platform, outperforming the competition on arc quality, voltage control, duty cycle and value. 
• This is optimized to deliver a flawless weld, making spatter and post-weld cleanup almost non-existent. 
• Dual Voltage Input (110V/230V) means you can plug into any common power supply. 
• TIG torch & cable 13ft, Electrode holder & cable 300A /10ft, Work clamp & cable 300A /10ft. All machines tested in the USA, One year warranty.

User questions & answers

Question:	can you run mig on this machine
Answer:	No it's just tig and stick
Question:	Can this unit be used for plasma cutting
Answer:	No
Question:	Which is better the stick use only ARC200 or the tig
Answer:	they are both good. I am a stick welder by heart (old school) be advised the stick welder burns hot. I you are used to welding anything at 90 amp you may try 80/85 on a test piece :- } Good machine by the way I was really impressed for the money. Enjoy!
Question:	Any recommendations on one can weld aluminum
Answer:	DC is not very effective for welding aluminum. Running dcrp will work but these machines don't appear to allow you to switch ground and torch connections. If you can then you'll need to run 1/8" or 5/32" lanth, thoriated, ceriated, zirconium, rare earth etc. tungsten to limit electrode disintegration. With that you could weld up to around1/8" thick material.

• Super Brightness And More Visual Area: 34 LED units, 5000K daylight and 2200LM provides super brightness and more visible area with a 150 lighting angle, perfect for your doorway, backyard, stairs and garage.
• Simple Installation And Adjustable Design: This light can be easily installed by mounting to a wall and following a few simple wiring steps. 2 adjustable head give you much wider light casting range and could be easily adjusted to the angle you need.
• IP65 Waterproof: The professional waterproof certification ensures safety for outdoor use, protecting lamp from rain, sleet or snow. Especially perfect use for Garage, Patio, Garden, Porch & Stair, workshops, industrial workstations, equipment rooms, etc.
• ETL Certification: The professional ETL certification ensures high quality and safety. The security light works 20000 hours lifetime and put an end to any danger you might meet when using other lights.
• Warranty Policy: We promise a 30-Day Money Back Guarantee, 90-Day Replacement and 5-year repair under warranty . Our customer service team are 7*24 online.

User questions & answers

Question:	I noticed that they provide 5 years warranty，then how do I get a warranty replacement if there's problem
Answer:	Thanks for your question on Amico led security light. Our customer service team are 7*24 online.You can contact us via Amazon by clicking this link https://amzn.to/3fyySn2 at any time. We promise 2 year warranty, According to your problem we will provide replacement or refund.
Question:	How far can the light extend from where it is mounted on
Answer:	I would say about 60 or so I have it mounted my garage and it lights up Workshop in a storage building
Question:	Is it flexible enough to be installed on a soffit
Answer:	Yes, they can be mounted under eaves and soffits. Because the light pivots are a little limited, you’ll just need to put some thought into how you position the lights orientation when you’re tightening it up. These work great under soffits when you keep the above in mind. I hung 6 of these lights under soffits and am really pleased with them.
Question:	How's the waterproof capability
Answer:	I think it’s waterproof, but one of my lights stopped working and the other is very dim after less than a year of use....