11 best bulbs for maglites

Product description

Specifications:

Base: P13.5S

Power: 3W

Input Voltage: DC 3V

Application: Great LED bulb replacement for D&C 2 Cells Maglite Flashlights, Headlight.

Package Quantity: 1 Pack

Light Color: Daylight White

Color Temperature: 6000-6500K

Beam Angle: 110 degrees

Lifespan: More than 50,000hrs, LED bulb will help battery life.

Work Temperature: -40℃ ~ +70℃

Warranty: 2 Years

Note: This bulb just can work in 2 D&C cell Maglite Flashlight, if your Maglite flashlight use more than 2 cells, please search: B07KWSBGKT

• Flashlight LED Upgrade Bulb: DC 3V, perfect replacement of 2 C&D Cells Maglite Flashlight
• Bright LED Light: 3W, High Power: Over 200LM, 6500K, Beam Angle: 110 degree. Light your way with daylight white
• Light Source: LED clips, LONG-LASTING, Lifespan: More than 50,000 hrs
• Polarity: This Maglite led flashlight bulb replacement is negative-ring, positive-tip, please check your flashlight before ordering
• P13.5S Base, Input voltage: 3V, Only fit standard D and C 2 Cells LED Maglite conversion

User questions & answers

Question:	Will this fit my mini mag LED pro flashlight
Answer:	Not sure how efficient it is when it goes out under 3 months normal use. Had one of the 6 just go out🤷🏽‍♂️
Question:	How many Lumens
Answer:	It shows >83+. The > sign means greater than. So they're saying the CRI is greater than 83. The + sign usually means "that number and above" which is redundant; assuming they really aren't trying to say that the CRI is greater than all numbers above 83 since you can't have a CRI greater than 100 since it represents a percentage). Nevertheless, I had overlooked the CRI rating and decided to cancel my order so I can look for similar lighting with a higher CRI rating.
Question:	What bulbs do I need for a mini mag flashlight
Answer:	It's UL rated for damp locations so yes it'll be fine. Remember as in all electronics, no direct water spray.
Question:	I don't have a Maglite flashlight, just a standard 2-D cell flashlight. Will this bulb work in it
Answer:	And I prefer 5000K. Anything below 4000K ("soft light" or "warm light") just looks like a dingy yellow on everything… like someone's smoked indoors for years. 6500K gets a bit too blue for me. After trying many different color temperatures, I have found 5000K to be the best for true colors; no dingy yellow or blue coloring. When I first switched from incandescent to LED lighting, 3000K to 4000K seemed so glaringly white. That's because I was used to seeing everything with that dingy yellow. But it didn't take long for me to adjust, and that's when I could see the yellow color in anything 4000K and below. 2700K is horrible for me. I like my whites to be WHITE (not yellow, not blue). I like my greens and reds and all the other colors to look true, as if I took them outside. So now I get 5000K for everywhere. I'd especially want that for my kitchen where I prefer it to look clean with the white looking white.

Product description

Maglite Replacement Lamps for 2-Cell AA Mini Flashlight, 2-Pack

From the Manufacturer

Is your future looking a little dim? Then switch the burned-out lamp in your AA MIni MagLite with this replacement lamp, and shed some new light on the subject. Each MagLite lamp is specifically designed to deliver the brightest, whitest, far-reaching light beam available without compromising battery life. These replacement lamps are vacuum-sealed and extremely bright.

• Country Of Origin: United States
• Model Number: LM2A001
• Item Package Dimensions: 48.25" L x 5.25" W x 5.25" H
• Item Package Weight: 0.016 lb

User questions & answers

Question:	I have a standard bulb maglite 3 cell , i want to convert to led, this is the necessary kit
Answer:	It fits D and C 2 Cells Maglite
Question:	How do you change bulb
Answer:	Does not say how many lumens. But I can say it is a bright white, I like bright white and I would compare it to over 4000K. I bought 2 of these from the same people. The 1st had a "halo" effect with low light in the middle. I just thought that was the way these conversions light were, I was disappointed, but the light was bright. However the 2nd light did not have the "halo" , was just as bright and worked very well.
Question:	HOW DO I ORDER IT
Answer:	It depends on whether You have a two-battery flashlight, or a 3-battery flashlight.
Question:	Can this kit replace the older 3-d cell flashlights with a Bulb
Answer:	You should confirm the bulb base of your flashlight, our bulbs base are P13.5S PR2.

Product description

459-LM2A001 Features: -Used With: AA 2 cell. -Additional Info:Mag-Lite Replacement LampUNSPSC: 39100000Testing Approvals: Unit Sold is in measure of 1 Card. Product Type: -Portable Construction Lights. Tri-Pod Mounted: -Yes. Bulb Type: -Metal Halide. Power Source: -Electric. Engine Type: -Electric. Dimensions: Overall Product Weight: -0.02 Pounds.

• Sold as 2/Pack.
• Vacuum sealed.
• Extremely bright.
• Energy efficient.
• Easy to install.

User questions & answers

Question:	Will this bulb work in a ray-o-vac 2-cell aa small yellow industrial flashlight? thank you
Answer:	this is a xenon bulb. far brighter than the OEM bulb...I use them in my maglites. The LED bulbs are expensive and require the original OEM collar...and they really save on battery live. get an led with at least 125 lumins
Question:	where is it manufactured
Answer:	I watched a YouTube video on how to change it. As I recall, you unscrew the lid and the bulb stays with the body. I just pulled it out and replaced it and screwed it back. I hope this helps!
Question:	What is the brightness difference between LED and incandescent bulbs
Answer:	You order it as you would any item from Amazon. Go to the page that shows the full description of the item, select either "add to cart" or "buy with one-click" and complete the transaction.
Question:	Anyone care to describe the difference between a standard bulb and xenon
Answer:	1) iF IT SAYS 3 D CELL then it should. 2) I would NOT BUY THIS PRODUCT. I bought 3 to replace my krypton bulbs on my 2 long owned MagLites. These bulbs are very misleading: a) not bright at all 2) won't focus a beam smaller than 10 feet across from 15 ft 3) while carrying the flashing the plug in bulb fell out into the lense . The companys replacement policy is that, NO REFUND. They know these are defective and want to get rid of them. I am VERY DISAPPOINTED with this product.

• FLASHLIGHT LED Upgrade BULB - Convert most C & D 3-6 cell PR style flange incandescent flashlights into bright, long lasting flashlights with this flashlight upgrade bulb, for upgrade Maglite bulb or replacement flashlight bulb,with LED technology.
• REPLACE WITH AN UPGRADE - Flashlight bulb burn out? Make a quick and efficient upgrade with this LED replacement flashlight bulb, by popping it in the same way you would a conventional bulb.
• ENVIRONMENTALLY FRIENDLY - The LED technology in this flashlight LED bulb offers a much longer battery life, making it an economically and environmentally smart choice as a upgrade led bulb, general flashlight upgrade bulb or replacement flashlight bulb.
• BRIGHT LED LIGHT - Light your way with white lighting and the High Power 200-lumen output of this flashlight LED bulb, as opposed to the dull yellow of incandescent bulbs.
• HIGH POWER, LONG-LASTING - The LudoPam high power flashlight upgrade bulb is long lasting and reliable, offering an estimated 30,000 hours of use.

User questions & answers

Question:	Will this upgrade bulbs work for my 6D cell Maglite
Answer:	No, this is for 3D ONLY, for Mag-Lite you need a sprecial Bulb for every Model, if you have a 2D cell you need a LWSA201 (Maglite don't make this anymore) but you can use LMXA201.
Question:	It says that its for 3-6 cell maglites.I thought that for example a 4cell would be a nominal 6 volts and a 6cell would be 9volts. why is this 12volts
Answer:	f you have a Maglite 3 D or 3 C cell and your bulb looks like LWSA301 this bulb will work. You may even consider to use a LiteXpress LED (bulb) like LXB530 or LXB525 (2mode) very robust and liftime up to 30.000 hours, Battery run time at least 10 times compared to the present bulb you had used.
Question:	Would this work on the hitachi 12 v flashlight ub10dl . The original bulb is a pr
Answer:	It worked in my maglite, I tried other bulbs and they didn't work.
Question:	I have a 3 d cell that's about 10 years old. Will this fit
Answer:	Just match bulbs.
Question:	Does this fit the 10" long, 2 D battery mag-lite
Answer:	Hello, They are manufactured in Hong Kong. Thank You
Question:	Burned out bulb says mag 3 cell HK, will these bulbs work
Answer:	A lot! for the AA Incandescent (Xenon) bulbs the lights are rated at 14 Lumen, 2305cd. The LED flashlights are 127 Lumen, 6093cd, The Maglight Pro AA were 226 Lumen, new ones are listed at 331 Lumen, and I have seen numbers in between as well (272?). The Pro+ Maglite AA givesa you more modes, and now currently lists 351 lumens. The C and D cell selections are almost as confusing! But ALL of the LED lights far outperform the incandescent. They are still being sold (I believe) to modify, such as my 2D Cell with 2 D converters, 6x 3.7v Li-Ion cells, a 1000 lumen TerraLux head (discontinued), real glass, crown bezel and pointed tailcap. All from Amazon.
Question:	Burned-out lite says mag-4-cellhk 19g. what is equivalent
Answer:	Xenon bulbs usually have a longer life span.

Product features

Give your Maligte flashlight fresh life, let him take you experience new life .

Don't match with Mag-num Star Xenon Bulb

The bulbs don't match with Mag-num Star Xenon bulb lights. Maglite Mag-num Star Xenon flashlights use a two pin bulb, not a retaining collar.

Negative-ring, Positive-tip

This bulb is negative-ring, positive-tip. Please check your battery polarity before replacement bulb.Otherwise, the bulb will be short circuit and began to heat.

Long Life

This LED bulb has a 30,000-hour life and even extends the flashlight battery life by 20 hours.

• Ultra-Bright 350 Lumen LED - 20 Hour Battery Life Extension
• 10 Times Brighter than Original Bulb and Never Burns Out
• Sure Fit LED Collar Included
• NEW! Now with a Poly-Carbonate Lens - Strong and Ultra-Clear
• Increasing Clarity Increases Brightness

User questions & answers

Question:	The description says the bulb is made for 4v to 12v lights. Can this bulb actually sustain a 12v load
Answer:	Yes,it work for 3-6 cell flashlights bulb
Question:	Can i convert a maglite with a incandescent bulb with two prongs with a led bulb
Answer:	The device is described as supporting 4 to 12 volts. I use it in a 4-cell maglite and it works great.
Question:	why do they keep changing the photo of the product and why did i get a different package then what is shown now
Answer:	I do not know if it will work in that flashlinght, but I can tell you that it is not very bright! I am a big fan of LEDs but this one in my Mag Lite was a big disappointment!
Question:	I have a 3 D old mag light, probably 20 years old will this work
Answer:	My 3 D Cell Maglite was over 10 years old and it fit in that just fine.

Product features

Up to 777% more light!

• Up to 305 more Lumens over Incandescent
• Improved Beam Distance (250m+)

Improved Battery Life

• Save Money on Batteries
• 20 Hour Battery Life Extension
• Compatible with Lithium Batteries (under 12V in total output)

Our Kit Includes Everything You Need

• Sure-Fit LED Collar
• 350 Lumen LED Upgrade Bulb
• CNC Cut Shatterproof Lens

Increasing Clarity Improves Light Output

Our CLR-TEC lens was designed using Maglites OEM specs. Replacing the lens improves overall light output compared to an older scratched lens.

Compatibility

• Compatible in 3-6 Cell Incandescent Models
• Works with Xenon models that have removable bi-pin adapter
• Compatible with C or D cell Models

Product description

LiteXpress LXB404 LED Upgrade Module, 360 Lumens for 3 - 6 C/D Cell Maglite Torches

• Light output up to 360 lumens
• Easy replacement
• extremly shock resistant and durable

User questions & answers

Question:	How many watts is this
Answer:	The description states 3 - 6 cell. A battery is 1.5V, and six batteries in series is 9V, so the bulb should be able to handle at least 9V.
Question:	how do you replace the xeon buld on a "New" 6d maglite with this led
Answer:	Yes - That’s exactly what I did. I have a 20 + year old 4 D Cell Maglite. I converted it to LED with thr LITT kit and am very happy with the results.
Question:	Where is this bulb manufactured
Answer:	Don’t know. I got the correct item.
Question:	I found this is not as powerful as the ludopam led conversion kit, has anyone else compared these two? thanks
Answer:	I think it will. I used it with a 20 +/- year old 4 D-Cell Maglite. A very big improvement. New life for an old, but classic high quality flashlight. Not as bright as the latest Maglite models But again a very big upgrade. Highly recommended.

Product description

459-LMSA301 Features: -Mag-lite C and D-cell flashlight Mag-num Star Krypton C and D-cell Replacement lamp.-Used With: C & D 3 cell.-Type: Krypton Bulbs.-Quantity: 1 per package.

• Package Quantity: 1
• Excellent Quality.
• Great Gift Idea.
• Satisfaction Ensured.
• Produced with the highest grade materials

User questions & answers

Question:	How many volts and amps is this bulb for
Answer:	not I

Product description

Maglite D Replacement Bulb for Maglite D Flashlight. Spare bulbs can be stored in end cap.

• Replacement bulbs only

User questions & answers

Question:	Is their a led replacement bulb for a mini mag lite that now uses xeon bi-pin bulbs
Answer:	Yes i can and thank you for asking, to replace the Xenon version and convert to LED Flashlight using the LiteXpress LXB404 Module you have to remove the Xenon Bulb and the white plastic adapter(just pull it out) that holds the bulb. LiteXpress Customer Service Wiesbaden Germany
Question:	How can I know that this is the right bulb for my Maglite
Answer:	All items are manufactured in China and imported from Germany

• FLASHLIGHT LED Upgrade BULB - Convert most C and D 3 4 5 6 cell PR style flange incandescent flashlights into bright, long lasting flashlights with this flashlight upgrade bulb, for upgrade Maglites bulb or replacement flashlight bulb,with LED technology.
• REPLACE WITH AN UPGRADE - Flashlight bulb burn out? Make a quick and efficient upgrade with this LED replacement flashlight bulb, by popping it in the same way you would a conventional bulb.
• ENVIRONMENTALLY FRIENDLY - The LED technology in this flashlight LED bulb offers a much longer battery life, making it an economically and environmentally smart choice as a upgrade led bulb, general flashlight upgrade bulb or replacement flashlight bulb.
• BRIGHT LED LIGHT , EAST to INSTALL - Light your way with daylight white lighting and the High Power 200 lumens output of this flashlight LED bulb, as opposed to the dull yellow of incandescent bulbs. Replace the bulb by unscrewing the flashlight head from the body, removing the retaining collar and old bulb, inserting the new LED bulb, and reassembling.
• LONG-LIFE - The LudoPam high power flashlight upgrade bulb is long lasting and reliable, offering an estimated 50,000 hours of use.

User questions & answers

Question:	Will this work on my Skil 18 volt flashlight? Model
Answer:	I converted my MagLite D 2-cell from the standard bulb it came with for an LED, the kit was easy to install, I was disappointed that the LED was not much brighter than the standard bulb.
Question:	Will this bulb work for u.s. army/military mx-991 l (right angle flashlight
Answer:	If your mag-lite is a 2 cell C or D flashlight it works great !
Question:	What is the lumen output of this bulb
Answer:	I bought it for a Maglite that holds 3 D cell batteries. Easy to replace.
Question:	Will an 18 volt LED bulb work with a 14.4 volt light
Answer:	3 watts

Product features

Give your Maligte flashlight fresh life, let him take you experience new life .

Don't match with Mag-num Star Xenon Bulb

The bulbs don't match with Mag-num Star Xenon bulb lights. Maglite Mag-num Star Xenon flashlights use a two pin bulb, not a retaining collar.

Negative-ring, Positive-tip

This bulb is negative-ring, positive-tip. Please check your battery polarity before replacement bulb.Otherwise, the bulb will be short circuit and began to heat.

Long Life

This LED bulb has a 30,000-hour life and even extends the flashlight battery life by 20 hours.

Product description

1.Bright white LED light. 2.LED never burns out. Extends battery life to 3 times longer than incandescent. 3.Ultra focus for long distances. Brighter than original incandescent bulbs. 4.Fit Maglite 3-6 cell flashlight. 5. High lumen 302 Lumen output at 9volt. 5.Real circuit. 6.Reverse polarity protection circuit. 7.Electronically regulated for constant light output. 8.Package: 1pc led bulb

• maglite led upgrade
• maglite led bulb
• maglite led module
• led flashlight bulb
• maglite led conversion kit

User questions & answers

Question:	will this work in a maglite 7c
Answer:	They fit my 18 volt Dewalt. They give measurements just measure your old bulb.
Question:	Will it work on 4c mag-lite
Answer:	I’m not sure. Your flashlight would have to have at least 6 volts to work. I put in my 18 volt Ryobi light and it works great.
Question:	Will this work in a 3 Dcell maglite? Also will it put out the 300lums it advertises
Answer:	It wasn’t on the description. All I can tell you that it is brighter then the original bulbs. I’m actually still using one of my 3 D battery mag light with the original batteries when I had the old bulb. With the old bulb, it was going dim. With the replacement bulb, it’s still bright even with the very old batteries. I have been using the flashlight pretty regularly.
Question:	What is it's max V rating
Answer:	I,m not sure but the range of operation is listed at 6-24 volts so at 14.4 , I would assume that it would give off a slightly dimmer glow.

Product description

MAGLITE LM2A001 specifically designed to deliver the brightest, whitest, far-reaching light beam without compromising battery life. Bi-pin, vacuum-sealed and extremely bright for its size. Sold as 3 PACK (with 2 lamps in each)

• Vacuum sealed
• Extremely bright
• Extends battery life
• Two lamps per pack
• Sold as 3 PACK