12 best menards pressure tanks

Product description

This Smart Technology electric tankless water heater is configured as a "whole home" model for climates where incoming water temperature is 67°F and above. This model is well suited for heating up to 2-Gallon per minute, which is the equivalent of one shower head (with a 1.5 gpm flow) and one sink with a low inlet water temperature of 67°F and an output setting of 105°F. Digital Temperature Control allows you to set your temperature in increments of 1 Degree. This model can also be used in colder climates as a Point of Use for a sink or other low flow application. All tankless water heaters are sized based on flow rate and temperature rise, and there is a direct relationship between the two. So if used in a cold area requiring a high temperature rise, it will be more limited in the amount of fixtures (gallons per minute) it can heat at one time compared to a warmer climate. When sized properly this water heater will provide endless hot water and only consume the energy needed, giving the user complete control. Prior to purchase and installation please verify this model is the right size for the expected demand and electrical requirements. The ECO 11 requires a minimum 125 amp electrical panel for installation with 60 amp double pole breaker connected to set of #6 awg wire. Plumbing connections are 1/2" compression fitting with the option of 1/2" NPT adapter included. For additional assistance please feel free to contact our support center at 877-474-6473.



NOTE : 11Kw at 220 is equal to 13kw at 240. .Activation Flow : 0.3 GPM

From the Manufacturer

This Smart Technology electric tankless water heater is configured for climates where incoming water temperature is 67 Degree F and above. This model is well suited for heating up to 2-Gallon per minute, which is the equivalent of one shower head (with a 1.5 gpm flow) and one sink with a low inlet water temperature of 67 Degree F. Digital Temperature Control allows you to set your temperature in increments of 1 Degree. This model can also be used in colder climates as a Point of Use for a sink or other low flow application. Prior to purchase and installation please verify this model is the rights size for your hot water needs and electrical requirements.

• Lifetime warranty
• Save up to 60-percent on your water heating cost with an ECOSMART electric tankless water heater
• Never run out of hot water with an ECOSMART tankless water heater
• Patented Self Modulating Technology and design
• ECOSMART tankless water heaters are 99.8-percent energy efficient.Uniform Energy Factor:0.98

User questions & answers

Question:	Ours has only been in service for less than a year - will not adjust temperature to anything above 85 Deg. F. What do you think is the problem ? kds
Answer:	My only guess is that the rheostat (variable resistor) that the temperature adjustment knob is attached to may be faulty. If that isn't it then I don't know. Sorry.
Question:	The warrenty says that this unit must be installed by a licensed electrician and plumber, for them to honor the "life time warrenty." why
Answer:	Hello Bob, The reason is the same as why an innumerable number of gadgets around the world have that little "warranty void if removed" label. Because getting inside of one requires a certain level of training and expertise. Same with this unit. GadgetsGo is an authorized Ecosmart dealer. Kind regards,HenryGadgetsGo
Question:	My house is wired 110V. What additional items do I need to purchase for the conversion
Answer:	Just to expand slightly on prior answers, normally a residential service feed is 240 volts between the two incoming hot legs. There is also a neutral leg, which (hopefully) has zero potential with reference to ground. The voltage between either one of the hot legs and the neutral leg is 120 volts. The 120 volt circuits in your house are connected to one or the other of the two hot legs, and only one. An attempt is made to assign circuits to the two hot legs in a way that will roughly balance the load between them. The other side of a 120 volt circuit is connected to the neutral leg. There is additionally a safety ground run with the circuit, which also ties into the panel. Certain devices require more power (work product of current and voltage) than is practical to deliver using a 120 volt circuit. Common examples are your clothes dryer, and your electric stove. These devices are powered by both hot legs, with a difference in potential of 240 volts. This water heater is also such a device.STRONG BUT FRIENDLY WARNING: If you did not already know this, please don't make wiring this water heater your learning opportunity with electricity. Hire someone who knows how to do it right. Cutting corners, especially with higher currents and voltages, can lead to equipment damage, fire, and electrocution. Electricity is not magic, and you can certainly learn how to do many common wiring tasks safely on your own, but today is not the day to begin that journey. You need properly sized components, properly installed, and connected to an adequate service. Also, if you really, really foul up, you could conceivably wind up making that morning shower more energizing than you ever imagined, if you get what I mean. So newly aspiring electricians should go fix their grandmother's favorite table lamp instead. Once they have that working they can use it to to start reading books about electricity, residential wiring, and eventually, books about this stuff: http://amazon.com/s/ref=nb_sb_ss_c_0_8?url=search-alias%3Dstripbooks&field-keywords=nec+code&sprefix=nec+code%2Caps%2C164 . Of course, you still have to know not to nick conductors when you strip them, and other trade craft like that ; ) . Like almost everything in life that is fun, electricity will hurt you. Sort of like all those people you dated for a while, and then wished later you had never met.
Question:	what amp breaker is required
Answer:	The National Electrical Code requires conductors and overcurrent protection to be sized at 100% of the manufacturer's branch circuit recommendation for tankless electric water heaters. A 60 amp breaker is the same price as a 40 or 50, it is the wire that costs more. #6 AWG wire is required for a 60 amp circuit. If you undersize the wire it could overheat and catch fire. Protect your family and follow the manufacturer's sizing for this, or any other, electrical device. Your family's lives are worth the extra money. 

Product features

3 Smart Steps for Endless Hot Water

Step 1: Determining your average inlet water temperature is important, this allows you to determine how well your unit will perform in your desired location. A lower inlet water temperature will require a higher kilowatt product.

Step 2: Next you will determine how many applications your unit can run simultaneously at your chosen location inlet water temperature. Tankless electric water heaters are sized for maximum simultaneous use, not maximum fixtures in your home.

Step 3: Determining specifications and electrical infrastructure is important because without the correct infrastructure your unit may not fit into your breaker panel.

Product description

The well-x-trol WX-202 pressure tank floor stand WX-202 is specifically designed for residences. It requires only a minimum of floor space and has an appliance-like blue finish allowing installation anywhere. Exclusive butyl diaphragm along with the 100% corrosion resistant virgin polypropylene liner are secured by a positive hoop ring seal for added strength and reliability. This totally integrated system outperforms other Types of water chamber designs. The stainless steel air valve is welded rather than threaded to prevent loss of air pressure. The finest quality custom mill steel is used in the deep drawn dome for extra strength while keeping tank WEIGHT to a minimum. Note: all tanks are pre-pressurized at 38 psi and should always be set 2 psi below the cut in of your pressure switch. It is recommended to check tank pressure before installation. Pressure switch settings should not exceed a 20 psi differential between cut in and cut out.

• High-strength Steel Shell
• Virgin polypropylene inner Liner will not crack, chip, flake or peel
• Unique positive hoop ring seal secures diaphragm and Liner for added strength and reliability

User questions & answers

Question:	is the 1' hole for water connection steel or plastic
Answer:	Hello dear customer Thank you for your interest in our smartwatch. You can't wear it while swimming, because there is a risk of water seepage in the water for a long time. It can't be worn when taking a bath. The water vapor in the air has a small radius and easily penetrates into the gap of the case. When the temperature drops, it will condense into water droplets, which will easily cause an internal short circuit. But you can wear it when you wash your hands, wash your face, and rain. Please feel free to contact us for any other question. Zhidi US
Question:	on the bottom of this tank where the tank tee screws in, is this a hard plastic or stainless steel or some kind of metal
Answer:	Hi, This fitness tracker comes with a built-in charger that removes the strap (from both sides) and plugs into any USB port, laptop/telephone adapter. The red light is on when charging. This is a video that shows you how to charge your product. https://youtu.be/A4H9GRLlqRI Note: This product does not have a separate charger.
Question:	Can this Amtrol tank be installed horizontally
Answer:	Hello Dear Friend Thank you for contacting us. This is adjustable band and suitable for 5.4 to 7.6 inches wrists. I hope this answer would help you, for any other question, please feel free to contact us. Best regards!
Question:	Can anyone post a link for a good how to remove and replace this tank
Answer:	Dear, thank you for your inquiry and interest in our product, I'm Kevin, so glad to answer your question. Our bracelet does not require a card, it needs to be connected to the Veryfitpro app on the phone. If you have any other questions, don’t hesitate to contact us directly. All products in our store have one year warranty, don’t worry about the quality.

Product description

Specification:

Model number: 97080503

Product Type: Pump & Tank System

Gallons: 5.8 gallons

Voltage 115/230 Volts

Frequency: 60 Hz

Item Weight: 37.5 pounds

Product Dimension: 22.9 x 14.5 x 25.2 inches

 

Ideal for the supply of fresh water to rural homes, farms and cabins where compact system size and ease of installation are most important. Jet pump and pre-charged pressure tank are factory assembled and ready to install. Pump casing is made of rugged cast iron. Low profile, compact horizontal pressure tank. Injector, foot valve and pressure gauge are included. 1-1/4 inch inlet size. 30/50 pressure switch and can be set for use with 115 volts or 230 volts. The hose connecting the pump and tank is made of braided stainless steel.

• Jet pump and pre-charged pressure tank are factory assembled and ready to install
• Pump casing is made of rugged cast iron
• Pre-charged steel tank has a high grade diaphragm water chamber - 5.3 to 14 gallons
• Low profile, compact horizontal pressure tank
• Low profile, compact horizontal pressure tank
• 30/50 pressure switch
• Can be set for use with 115 Volts or 230 Volts

User questions & answers

Question:	Going to be using this at the lower ~20psi - Do I need to hook it into a separate pressure relief valve
Answer:	We have it hooked up to a large water tank and to our camper. We do not have a separate pressure relief valve. Hope this helps.
Question:	can this be used for potable water
Answer:	Yes, I have this pump and use it for potable water to supply both my cabin and camper during the summer months. Since I use it seasonally I run a bleach treatment at the beginning of the summer season to ensure that the pump is clean.
Question:	What is the Max head on this system
Answer:	It’s about 25 feet.
Question:	does this pump require a foot valve
Answer:	My well has a foot/check valve located at 20 ft in order to hold prime.

Product features

Red Lion Shallow Well Jet Pump And Tank Package 5.8 gallon

Ideal for the supply of fresh water to rural homes, farms and cabins where compact system size and ease of installation are most important. Jet pump and pre-charged pressure tank are factory assembled and ready to install. Pump casing is made of rugged cast iron. Low profile, compact horizontal pressure tank.

The Red Lion Story

Backed by the heritage of a global leader in the development and manufacturing of systems and components that move water, the Red Lion brand remains at the forefront of product innovation by listening to its customers, adapting to the market, and continuing to invest in research and development. This innovative product portfolio is supported by unparalleled service to provide you with current solutions to your water pumping challenges.

Product description

The tankRO 4 Gallon Water Storage Tank gives tasteless, odorless, and contaminant free water. Get a quality tank you can rely on today. The post cured diaphragm means sterile water distribution to keep your water safe. The water reservoir can hold up to 3.2 gallons of water at once, with the rest of the storage area being occupied by the pre pressurized air bladder, which helps you draw water from the tank. This tank comes with a free Tank Ball Valve and a free Tank Stand. All components are NSF Certified. Designed to fit under sinks this water holding tank will fit most kitchen cabinets, it is made to work when lying on its side or upright. The Tank is durability tested at several stages and is backed with a one year warranty. Maximum working pressure of the tank is 100 PSI. The tank is also designed to survive the outdoor elements with a two part epoxy primer and polyurethane paint finish. This is a fully functional pressure tank for water wells. The water accumulator chamber of the tank includes the highest grade of polypropylene, virgin polypropylene, meaning you have the most durable and smooth inside lining. This tank is built to last with heavy duty commercial construction with durable deep drawn steel domes and precision welded seams. Improve your water today.

• Reverse Osmosis Tank: Made from 100% food grade materials, this RO water tank stores and keeps your water free from any contaminants and harsh chemicals. The perfect addition to any RO water system.
• Easy to Install Water Tank: RO tank replacements include free tank ball valve for easy set-up and replacement with 1⁄4” quick connect design.
• Certified Water Storage Tank: This RO water tank is NSF Certified and includes a 1-year warranty. Every water tank is rigorously tested for quality and durability.
• High Quality Water Tank: This water storage tank is made from durable deep-drawn steel domes with precision welding to ensure long lasting value for your RO water system
• Water Tank Dimensions: This compact water tank is designed (15 x 12 x 12) to fit under most kitchen sinks. Stores up to 3.2 gallons of water for on-demand filtered drinking water.

User questions & answers

Question:	Pressure Preset 7psi, gets only 2.1 gallon of water. Is it normal
Answer:	From top of floor to top of seat, when assembled for max height, it is 36 1/4". I know how to use a tape measure, being a Carpenter. Plus, I'm 5' 10 1/2", my son is 6' and it works for us. Go for it, you won't be disappointed.
Question:	gallon okay in place of 3.2 gallon tank
Answer:	No
Question:	How do you flush this tank before the first use
Answer:	At over 6feet and 300 pounds bike was to small
Question:	what country made in
Answer:	It says right in the description...25#

Product features

Tank Valve Included

A free 1/4" tank valve is included

Quick Connect Compatible

Compatible setup for quick connect tubing

Free Tank Stand

Comes with a tank stand to secure the tank

Be Confident

All components are high quality food-grade and NSF Certified

• A sealed brass air nozzle and o-ring sealed air valve caps means consistent air pressure
• Designed to last over five years
• Certificate# C0353911-02, Issue Date: January 16, 2018

Product description

Power. Performance. Versatility. The Pressure Joe SPX3000 electric pressure washer delivers it all to tackle a variety of cleaning tasks: homes, buildings, RV’s, cars, trucks, boats, decks, driveways, patios, lawn equipment and more. Packed with an 1800-Watt/14.5-amp motor, the Pressure Joe SPX 3000 generates up to 2030 PSI of water pressure and 1.76 GPM of water flow for maximum cleaning power. Remove tar and grease from concrete, heavy mildew stains, oil stains, rust from steel, caked mud on equipment, and other stubborn gunk and grime. Equipped with a dual detergent tank system the Pressure Joe SPX3000 carries and stores two different types of detergent simultaneously in its two .9L onboard removable detergent tanks. Conveniently switch between different detergents with its detergent selection dial and blast away all sorts of grime. Its 34-inch extension spray wand and rear wheels provide easy maneuverability and access to hard-to-reach areas such as 2 story buildings and the undersides of the automotive vehicles and lawn equipment. Tailor the pressure output of the spray to your cleaning needs with Pressure Joe's five quick spray nozzles. Other features include: 20 foot high pressure hose, 35 foot power cord, garden hose adaptor, and a TSS (Total Stop System) trigger that automatically shuts off the pump when the trigger is not engaged. Voltage 120 V ~ 60 Hz

• Power Source Type: Corded-Electric

User questions & answers

Question:	Can a professional foam lance be attached to this
Answer:	Yes! The Professional Foam Lance (MTM Hydro) comes with both 1/4'' quick connect and M22 fittings. You can either attach the Lance to the end of the extension bar with the 1/4" quick connect, or at the end of the gun with the M22 fitting.
Question:	Is the pressure sufficient for (1) cleaning vinyl siding and (2) cleaning mildew off a large wooden deck
Answer:	1. yes, but only for about 1 story without ladder. you need to be 4-5ft away2. yes, worked great on reclaimed hardwood to remove grime and mildew. You need to go very slowly with a narrow angle nozzle 3-4inches from the surface. The cleaned strip is narrow so it takes a while to do a large area. That being said, you'll get the job done and I am not sure any pressure washer will make a job like that really quick, just much easier than hand scrubbing.
Question:	Sun Joe SPX3000 pressure washer: I read that you need soap designed to run through the pump. Have you found a brand of soap that is OK for this
Answer:	According to company website: "Your Sun Joe Pressure Joe SPX3000 has a downstream chemical injector, installed on the outlet (discharge) side of the pump, that applies detergent with the dedicated soap nozzle. The advantage of the downstream injector is that the chemicals cannot cause damage to the pump system. In upstream injectors, the chemicals run through the pump, causing the pump seals to wear out."So if you use soap, it doesn't run through the pump. I would still be careful what you use and maybe dilute it to help prevent damage.
Question:	What makes this one so much better than the AR Blue Clean that's $45 cheaper? (Besides psi
Answer:	The Sun Joe has brass fittings on the water connectors which makes it more substantial and less likely to leakethan plastic fittings. Does the AR Blue Clean have brass fittings now?

Product features

You Name It, You Aim It, Grime Is Gone

THIS ELECTRIC PRESSURE WASHER GETS YOUR DIRTY WORK DONE. The Sun Joe SPX3000 pressure washer delivers it all to tackle a variety of cleaning tasks: homes, buildings, RV’s, cars, trucks, boats, decks, driveways, patios, lawn equipment, and more.

OUR BEST-SELLING PRESSURE WASHER, THE SPX3000 COMBINES POWER, PERFORMANCE, AND VERSATILITY. The Sun Joe SPX3000 electric pressure washer generates up to 2030 PSI of water pressure and 1.76 GPM of water flow for maximum cleaning power.

Dual Detergent Tanks

Two 0.9 liter onboard, removable tanks carry and store different types of detergent to simultaneously tackle different cleaning projects.

Safety Lock Switch

TSS (Total Stop System) trigger – automatically shuts off the pump when trigger is not engaged to save energy and prolong pump life.

Accessories

Includes two 30.4 ounces (0.9 liter) removable detergent tanks, 34 inch extension wand, 20 foot high pressure hose, 35 foot power cord with GFCI protection, garden hose adapter, needle clean-out tool, 5 quick connect spray tips.

SPX-25H

25 Foot Universal Pressure Washer Extension Hose for SPX Series and Others.

SPX-PCA10

10-Inch Surface, Deck, Patio Cleaning Attachment for SPX Series Pressure Washers.

SPX-RB1

Rotary Wash Brush Kit For SPX Series Pressure Washers.

SPX-TSN-34S

Quick-Connect Turbo Head Spray Nozzle.

Product description

2-1/2 Gallon Pressure Feed Paint Tank Pot Spray Gun Sprayer with 10 ft Air and Fluid Hoses

2-1/2 gallon paint pressure tank with spray gun and 10' air and fluid hose assembly. The spray pot gives you the benefit of storing a large volume of paint that can be applied rapidly, saving you time and money. Excellent for commercial painting or situations where a large amount of spraying is required. Paint tank is equipped with an air regulator, gauge, safety vale. Heavy-duty spray gun with 1.5mm nozzle has air and paint regulations.

Technical Parameters

Standard Nozzle: 0.06"(1.5 mm)

Operating Pressure: 45 to 60 PSI (3.0 to 4.0 bar)

Pattern Width: 7.1" to 9.1" (180 to 230 mm)

Air Consumption: 6.0 to 8.8 CFM (170-250 l/min)

Paint Pot Capacity: 2-1/2 Gallons (Aprox. 10 Liters)

Paint Tank Operating Pressure: Optimal 25-30 PSI

Hose Assembly: 10 foot Air and Fluid Hoses

Air inlet: 1/4"

Fluid inlet: 3/8"

Features

Clamp on lid with Gasket

Air pressure relief valve for safety

Fluid pressure regulator with gauge

Heavy duty pressure feed spray gun with 0.06"(1.5 mm) tip

Heavy duty paint pressure pot tank with 2.5 gallons (10 liters) capacity

Excellent for commercial painting or situations where a large amount of spraying is required

Package Content

1 X Spray gun with 1.5mm nozzle

1 X 10ltr tank with air regulator and safety valve

2 X Hose

1 X Instruction manual

• Standard nozzle:0.06"(1.5 mm), Operating pressure:45 to 60 PSI; Hose assembly:10 ft air and fluid hoses
• Heavy duty pressure feed spray gun with 0.06"(1.5 mm) tip, fluid pressure regulator with gauge, air pressure relief valve for safety
• Paint pot capacity:2-1/2 Gallons (Aprox. 10 Liters); Paint tank operating pressure:optimal 25-30 PSI
• This pressure pot paint tank packing with 1 x spray gun with 1.5mm nozzle, 1 x 10ltr tank with air regulator and safety valve, 2 x hose
• Pressure tank paint sprayer excellent for house keeping and commercial painting or situations where a large amount of spraying is required

User questions & answers

Question:	Is moisture an issue with using the compressor method
Answer:	stainless steel
Question:	Does this work for spraying automobile and trucks with single stage enamel paints
Answer:	There catalog said "stainless steel connector", which I believe was is what I had (painted, but was metal). I used a 1 inch PVC fitting threaded male end to connect to tank and glue female end to connect to my existing PVC pipe. Works good.
Question:	Will this pressure pot allow me to cast epoxy resin
Answer:	Regarding the WX-102, Raymond Deming, Senior Product Application Specialist from Amtrol told me, "Properly supported, the tank will perform just fine in the horizontal position."
Question:	Planning on using this for epoxy; what are the fitting sizes for new parts? Better yet, can I get links
Answer:	Its pretty straight forward if you have one in place already ? They offer a manifold also that will hold the Pressure switch and Gage that is 1" MIP and goes into the 90 or elbow on the bottom of the tank.. what type pipe are you dealing with Copper CPVC PEX or quest Galvanized Iron ?

Product description

Get hot water where it's needed, when it's needed with the Bosch ES4 Tronic 3000 T Electric water heater. This 2.5-gallon capacity point-of-use mini-tank fits right under your sink and provides a practical and effective solution to your hot water needs. This smaller model can be plugged right into a 120-volt outlet with the 36-37" cord, or can be installed in-line with a larger hot water source to provide "on-demand" use. The glass-lined tank offers great insulation and added durability, while the heater's fast recovery rate eliminates long waits for hot water. An external dial allows you to easily control the temperature range, and the temperature-and-pressure relief valve enhances your safety. The ES4 Tronic 3000 T from Bosch has a sleek and attractive exterior design that blends in seamlessly with existing decor when installed in a visible location, making this heater a great option in any room.

Manufacturer Contact Information

800-283-3787

• CONVENIENT HOT WATER HEATER: 2.5 gallon point-of-use mini-tank fits under your sink to provide hot water right where you need it. Thermal efficiency is 98%. Dimensions : 13.75 W x 13.75 H x 10.75 D Inches
• LONG LASTING QUALITY: This electric water heater is easy to maintain and has premium glass-lined material for a long service life. (Amps 12A, Volts (VAC) 120)
• INDEPENDENT INSTALLATION: 36-37" cord plugs into a 120 volt outlet for independent installation or in-line with a large hot water source
• FAST RECOVERY RATE: Eliminates long waits for hot water at your sink, get on demand hot water at your every need (supplies up to 2 sinks at a time)
• EASILY MOUNTED: Can be shelf, wall or floor mounted (bracket included); simply tap into the cold water line and install the water heater directly at the sink to provide hot water

User questions & answers

Question:	Is it necessary to connect an expansion tank to this heater (for safety purposes)? It states something to that effect in the user manual
Answer:	The expansion tank for this heater is not required. Most people already have these installed in their homes but if not then it would be Ok without it as there is a pressure relief valve on top if something happened. GlobalTowne is an authorized Bosch distributor.
Question:	would this be able to supply a shower
Answer:	A standard flow shower head is around 2.5 gallons per minute. A low flow head is around 1.5 gallons per minute. The recovery rate for a 90 degree temperature rise is 6.8 gallons per hour! So even the 7.5 gallon unit would only provide 4 minutes of shower time before the temp dropped off dramatically. (even at the low flow rate..)
Question:	Can be used "in-line with a large hot water source"? Would it help a large bathtub that runs out of hot water before it gets full from main tank
Answer:	If your bathtub is bigger than your main heater tank, this unit isn't going to do much for you. It will add 2.5, 4, or 7 gallons to the capacity of your main tank, depending on which Bosch unit you buy. The 7 gallon unit requires a specially wired circuit. You will also get a little bit of lukewarm water that was in the line between your main heater and the Bosch unit. Unless your main tank is awfully small and your bathtub massive, the 4 gallon unit should work for you. Maybe a demand type thankless heater in your bathtub hot water feed would be a better choice, but be careful to size it properly for your desired flow rate and temperature rise. Also a tankless is likely to require special wiring.
Question:	When this heater is connected to the hot water line, what happens with the cold water that was sitting in the pipes
Answer:	When the tap is opened, the hot water in the unit flows out. The colder water that was sitting upstream of the unit, enters the unit to be heated. If the tap remains open, the newly heated water flows out, being replaced eventually, (depending on the distance to the main water heater), with the water from the main water heater. You will probably set the unit temperature to equal the main water heater temperature, if you want to keep a constant temperature, but other scenarios are possible.

Product features

Bosch ThermoTechnology

The Bosch Tronic 3000 T point-of-use electric mini-tanks are available in three compact sizes, which can be wall-hung (bracket included) or floor-mounted. They fit easily under a sink, even in a cabinet space, and because they have a sleek and attractive design, they blend in seamlessly with existing decor when installed in a visible location. Simply tap into the cold water line and install the water heater directly at the sink to provide hot water. Great for a wide range of locations!

Water Where You Need It

Provides hot water quickly at point of use and comes with temperature /pressure relief valve installed - 2.5 and 4 gallon tanks feature a simple 120 VAc plug-in connection (1440 watts).

Quality for Long-Life

Thick CFC-free foam insulation for maximum energy efficiency, glass-lined tank for durability.

Great for Small Spaces

Water heaters are compact and lightweight and can be floor, shelf, or wall mounted (except 7 Gallon) - features a sleek and attractive design to blend seamlessly with decor.

Minimize Wait Time for Hot Water

Waiting for hot water at a sink located far from a primary heating source can be frustrating. Only having access to cold water from a sink is just not useful, and plumbing a hot water line to every sink in a home or business requires time and money. To get hot water where it’s needed, when it’s needed, a better solution is to use the Tronic 3000 T from Bosch: a point-of-use electric mini-tank heater. This heater can supplement a primary water heating source, or be used under a single sink. In fact, the Bosch Tronic 3000 T can be used for three different applications: as a sole water heating source for a single sink, as a supplement to an existing heater located far from the sink, and as a buffer installed in-line with tankless water heaters that experience intermittent cold water, also known as 'cold water sandwiching'. No matter the configuration, there’s minimal stand-by loss from this premium mini-tank water heater.

Product description

The Craftsman 6 gallon air compressor features an oil-free pump for maintenance-free operation and a long life. It is lightweight and portable at 30lbs, and features a long runtime and quick recovery.

• 6 gallon pancake maximizes portability and stored air
• Durable, oil free pump for long life and no maintenance
• 150 max PSI to ensure adequate cut in pressure for a variety of applications
• 2.6 SCFM @ 90 PSI allows for quick compressor recovery time. Voltage - 120 volt
• Easily starts up in cold weather
• 13 piece accessory kit includes: 25' X 1/4inches Pvc air Hose with coupler and plug assembled, tire chuck with plug, blow gun with plug, tire gauge, blow gun with OSHA safety nozzle, rubber tip, three inflator adaptors
• 1 year limited warranty, refer to "warranty & support" section below for full details

User questions & answers

Question:	Is this made by black and decker? what lind of gears does it have? are they vynil
Answer:	Three.but have adapter to use 2 holes.
Question:	Is this unit built in the U.S
Answer:	No it doesn’t come with it. You have to buy it separately. You can get it from Home Depot.
Question:	What is the noise rating on this? Is it louder than comparable brands
Answer:	Yes it connects to an air compressor.
Question:	How many amps? Need to know if it will trip my standard 15 outlets or if it needs to run on a 20 amp outlet
Answer:	I will use Amazon when I need them. Just purchased product so do not need one now.

Product description

Our standard RO water tanks offer quality water storage for use with most residential reverse osmosis systems. Built with stainless steel construction, these durable tanks will deliver a continuous and stable Supply of purified water at a fast flow rate with high volume suitable for average to large size families. Supported by fully enclosed polypropylene and butyl reservoirs, these storage tanks provide airtight protection against leaks and contamination. Their stainless steel connectors ensure leach-free integrity while post-cured diaphragms eliminate the possibility of odors from the tank. Individually pressure-tested for safety, all our tanks are nsf certified and approved for materials quality, safety, and durability making them suitable for use anywhere in the world. Specifications: dimensions: 16 inch D x 32 inch h weight: 34 lbs optional tank ball valve: 3/4 inch connection to 1/4 inch or 3/8 inch tube size (not included with the tank) APEC Water Systems does not distribute or sell our products to any 3RD party sellers on Amazon. Please purchase genuine apec water system product in “new” condition from here or apec water directly for authenticity. Manufacture warranty may not apply in all cases, depending on factors such as use of product, where the product was purchased, or whom you purchased the product from. Please review the warranty carefully and contact apec if you have any question.

• Pre-pressurized 20 gallon water storage tank (holds up to 14.8 gallon of water)
• Discharge efficiently in a vertical or horizontal position with tank stand
• Food grade bladder and certified to ensure quality, safety and durability
• Inlet/outlet connection: 3/4 inch male pipe thread. Special designed for ro application

User questions & answers

Question:	Can this be used with your essence roes-50? i need more water storage
Answer:	I’m not getting that much. I get about 1-1/2 gal. I think it depends on the pressure of your water system. I only have 40-50 lbs. I’m on a well system. Would love your output ;-(
Question:	Can two of these be hooked up to a single RO-90 system for extra storage
Answer:	It can only hold up to 3.2 gallons of water, not 4 gallons. 4 gallon is the tank size. With a regular preset pressure at 7 psi, you will get around 2.4 gallons of water each flush.
Question:	With the 20 gallon tank, is the 32 inch height on stand or the tank itself
Answer:	attach it to the system, then fill it drain it fill again and drain it. flushed no issues. it is sanitized so no issues on that part. Ready to go, drink and be merry.
Question:	Does tank ball valve come with the tank
Answer:	They’re made in Taiwan per the printing on the box which the tank arrived within.

Product features

Premium Quality Water Storage Tank

APEC storage tanks are constructed using the finest material available, ensuring tasteless, odorless, and contaminant free water. Only pure pristine water goes in your glass!

Regards to Structural Integrity

APEC RO tanks are put through a rigorous quality control process at multiple stages to ensure the structural integrity of every tank. In addition, the tanks are built with sealed brass air valve and o-ring sealed air valve caps to ensure leak-free air chambers.

Larger Capacity Water Storage

The pre-pressurized 20 gallon tank holds up to 14.8 gallon of water, offering high volume water storage suitable for large size families or small to mid-sized businesses .

Easy Installation and Maintenance

Compatible with industry standard 3/4" NPTF female adapter and 1/4" tank ball valve. Easily DIY by following step by step detailed instruction manual. Just set it and forget it.

*Tank ball valve with adapter kit (TBVAL34-14 ) does not come with the tank.

Product description

Generac's SPEEDWASH 6882 gas powered pressure washer provides you with a complete washing system featuring best-in-class cleaning power. This complete cleaning system includes a family of innovative cleaning attachments (turbo nozzle and soap blaster) to deliver better cleaning results in less time. The turbo nozzle attachment with rotating pinpoint stream is designed to remove stubborn dirt and grime off tough surfaces 30% faster than standard nozzles while the soap blaster attachment sprays soap 3X farther than a standard nozzle tip to penetrate tough stains and improve cleaning results.

• Clean smarter. Clean up to 50% faster.
• Attachments included: Turbo nozzle removes dirt and grime 30% faster and soap blaster sprays soap 3x farther
• Generac 196cc OHV engine delivers maximum cleaning performance
• Includes 25 feet high pressure flex hose (kink resistent, non-marring) and 4 quick-change nozzle tips: 0 Degree, 25 Degree, 40 Degree and soap

User questions & answers

Question:	do handle bars fold down
Answer:	It can be. You should always use a moisture trap between the air compressor and the pressure pot. You want to stop the moisture from reaching the pressure pot and contaminating whatever type of finish you are using. If you live in an area with high humidity levels, moisture will build more rapidly than in drier climates.
Question:	What size are the couplers if i want to get a longer hose or add a foam cannon for car washing and stuff
Answer:	I used my sprayer for an oil based paint for wood fencing. But i will tell you that it done an exceptional job and also the spray nozzle is adjustable. I would recommend this sprayer.
Question:	The ignition switch was broken right out of the box. how can i get this warranted? which is the correct serial number on the unit to use
Answer:	Yes, If you are using molds. I modded mine to to the epoxy resin task quiet nicely. The dip tube was a chore to take out. If you never want to use it as a paint pot just cut it off. It holds pressure for 24+ hours no problem.
Question:	What is the Warranty
Answer:	I bought my pressure pot for the same reason as you. I removed most of the plumbing that came with the pot, but did reuse the pressure relief valve. It is set at about 55psi to release pressure. I took the fittings to Lowe's for a proper match, because there are too many sizes and thread type to guess. I added a new, simple and easy to read, pressure gage (Amazon-Zenport DPG60). I reused the ball shut-off valve. I also changed the air intake quick disconnect to fit my compressor. I hope this help you, Tom

Product features

A Complete Pressure Washing System

Generac’s SPEEDWASH power washers provide you with a complete washing system featuring best-in-class cleaning power. This complete cleaning system includes a family of innovative cleaning attachments to deliver better cleaning results in less time.

3200 PSI unit shown.

Product description

Superior Pump builds pumps that are truly Built to Last and are 100 percent factory tested. Superior Pump uses quality components including solid copper motor windings, heavy duty stainless steel jacketed shaft seals, double o-ring seals on motor plate, and electronically controlled split capacitors. Superior Pump model 91250, 1/4 HP thermoplastic submersible utility pump with 10 foot power cord and ¾-inch garden hose adapter, will move water up to 1800 gallons per hour. Equipped with suction screen to filter out large debris and handles up to 1/8-inch solids with ease. Base of the pump is designed to fit the hub of a standard 6-inch floor drain. This pump is UL/CUL listed and CSA certified and backed by a 1 year warranty.

From the Manufacturer

Superior Pump is a family owned and operated Pump Company specializing in residential / light commercial duty pumps. Headquartered in Minneapolis, Minnesota, Superior Pump was founded in 1999 after spending years in the pump industry dating back to the 70's, and with a plumbing background starting in St Paul Minnesota dating all the way back to 1885. Superior Pump adheres to our strong core family values, selling the absolute highest quality product possible. Known for building durable pumps, Superior Pump concentrates on quality throughout the engineering, manufacturing and testing processes. Quality products, strong warranties, excellent USA based customer service - Superior Pumps Built to Last!

• 1/4 HP Utility pump moves up to 1,800 gallons per hour; pump will lift water up to 25' of vertical height
• Tough thermoplastic construction; 10' cord length
• 1-1/4 inch NPT discharge for high capacity pumping; includes 3/4 inch garden hose adapter
• Removable suction screen and handles up to 1/8 inch solids
• Superior Pumps are Built to Last, engineered with quality components and are 100% factory tested

User questions & answers

Question:	What's the PSI or max head (pumping vertical height) of this pump
Answer:	A quick Google search of "Superior Pump 91250" yields the manufacturers specs. I do not see PSI listed but "Pumps will lift water up to 25' of vertical height" I belive answers your question...there is a chart on the "Performance" tab that shows 30 GPM at 0' lift and 2 GPM at 25' lift...with flow rates every 5' listed.http://superiorpump.com/products/utility/91250.html
Question:	Does it have an automatic shut off
Answer:	The pump does not have an automatic shut off. I added a float switch because I wanted it to pump out a sink that had a slow-running clogged drain where I had the washing machine. When the sink was mostly pumped out the float switch turned off the pump. It worked great for a couple years until I got around to dealing with snaking the drain which didn't have an easy clean-out. This is a good pump, since the sink drain got taken care of, we've been using the pump to pump koi pond water over a 5' fence to our neighbor's garden using about 150' of garden hose. The pump runs continuously for 5+ hours without issues in this process.
Question:	Will clothes washer hoses fit on this pump
Answer:	The pump itself fits a garden hose nicely. You can buy the attachment package listed next to it for the converter piece. It only came to around $8.00. It also comes with a larger hose. I didn't need it for my spa but if you need to empty a washer or bigger pool it seems like it would come in handy. Hope that helps. Good luck. :-)
Question:	Can this be user to flush a tankless heater with vinigar
Answer:	I bought the pump for this very reason. I'm not sure if it is rated to handle vinegar, but at the price I figured I'd try it and see. I have two tankless water heaters, and I wanted a pump that could clean out both at the same time and this pump certainly does the job. I have a hose that runs from the pump, into a splitter. From the splitter I have two hoses going to each water heater (one hose per water heater). Even pushing water through two hoses, it still has a strong flow, with each hose pushing about the same flow as the water hose faucet outside your house opened wide open (guestimate). The splitter I have allows me to adjust the flow rate by closing off some valves if it is too strong. For just one water heater, i would think this pump is too strong (as it REALLY moves water), but I'm not a plumber so I couldn't say for sure. If I were to do it again, I think I would have purchased the 1/4 HP pump, or even the 1/5HP for cleaning out water heaters with vinegar. I cleaned out my water heater this week for the first time using this pump. I let it run for 2 hrs, and I noticed that it got warm (about the temp of a warm-to-hot bath). I'm not sure if that is normal, but thought I'd let you know.

Product features

Superior Pump 91250 1/4 HP Thermoplastic Utility Pump

Superior Pump builds pumps that are truly Built to Last. Superior Pump uses quality components including solid copper motor windings, heavy duty stainless steel jacketed shaft seals, double o-ring seals on motor plate, and electronically controlled split capacitors. Superior Pump model 91250, 1/4 HP thermoplastic submersible utility pump will move water up to 1800 gallons per hour. Equipped with suction screen to filter out large debris and handles up to 1/8 inch solids with ease. This pump is UL/CUL listed (E238091, by UL, 2019) and CSA certified (230584, by CSA, 2019)

Construction and Discharge

• Thermoplastic construction is corrosion resistant and offers years of performance and reliability.
• 1-1/4 in. NPT discharge.
• 3/4 in. Garden hose adapter.

Multiple discharge hookup options

• Easily hook up to a Garden Hose* or Discharge hose* (*not included)
• Easy to transport using the carrying handle.
• 10 ft. power cord.

Intake Screen

• Intake screen filters out debris from entering the impeller. This helps reduce the clogging and prolongs the life of the pump.
• Easily to clean and is removable.

Motor and Performance

Motor:

• 1/4 HP Superior Pump continuous duty, thermally protected - split capacitor motor

Performance

• 1800 Gallons per hour at 0'
• 1200 Gallons per hour at 10'
• 540 Gallons per hour at 20'

• Engineered with double backwash

User questions & answers

Question:	Does this model reduce radium in water
Answer:	It's suitable for softening water from any source including a well. The amount of dissolved contaminants (maganese) indicated on a water hardness test determines how well the unit will "soften" your water.
Question:	Does the five-year head warranty cover the Pistons and seals as well
Answer:	They are exactly 2" apart from center to center.
Question:	The area I have is 26" wide, 30" deep. The pipes come down to 48" off the floor; unlimited if unit moved out but cuts into 30" deep. Will it fit
Answer:	Due to popular demands, the system now comes with 1" bypass by default. Customers can still request 3/4" bypass upon ordering by messaging us.
Question:	does it have a low salt light
Answer:	The systems are designed to work with certain sized households. You would not want to oversize or consider the next system up unless your water hardness exceeds 20 GPG (Grains Per Gallon). Please refer to the system sizing below as a reference. SYSTEM SIZING 32,000 Grain - perfect for the household size of 1-2 bathrooms and up to 1-3 people. 48,000 Grain - perfect for the household size of 2-4 bathrooms and up to 4-5 people. 64,000 Grain - perfect for the household size of 4-6 bathrooms and up to 6-7 people. (If your water hardness exceeds 20 GPG of hardness then we would recommended going the next system size up )

Product features

System Includes:

• Fleck 5600 SXT Metered Softener Valve
• 1 inch noryl plastic male threaded bypass
• USA Black Tanks
• Upgraded Paddlewheel Meter
• 1/2 inch Drain Barb
• Safety Float
• Overflow Elbow for brine tank

True Blue Dealer

Be sure that you are buying from a certified Pentair True blue Dealer. Aplus Water is a certified True Blue dealer.

New Pentair Scan and Service Application

The Scan and Service App is a new feature from Pentair. It has important information about your water softener at the touch of your fingertips.

This App provides access to:

-Detailed Configuration

-Technical Documentations

-Spare Parts

-Troubleshooting Manual

Made in the USA

The Fleck 5600 SXT metered control valve and Pentair Structural tanks are made here in the United States.

Flecks Most Popular Softener Valve

The Fleck 5600 SXT Metered Softener valve is the most popular valve they make. This valve measures your water usage and regenerates as needed which saves you on water and salt usage.

New Pentair Scan and Service Application

The Scan and Service App is a new feature from Pentair. It has important information about your water softener at the touch of your fingertips. This App provides access to: -Detailed Configuration -Technical Documentations -Spare Parts -Troubleshooting Manual