11 best reverse osmosis system for sap

• [Fits Standard-type Light-Commercial Water Systems] Membrane Solutions 3012 Reverse osmosis housing, with a universal size, is compatible with most of the standard-sized 200/300/400 GPD membranes that measure 3" x 12". Note to confirm the flow rate of your water system before choosing a housing.
• [Material Safety] Made of high-quality, NSF-approved polypropylene, no solvents or glues during the production process.
• [Efficient Leakage Protection] Designed and manufactured with a thicken unibody and a tight o-ring sealing leakage protection to ensure drinking safety, compression resistance, and explosion-proof strength.
• [Multi Usage Scenarios] Use a reverse osmosis filtration set to your RO water system at the home, office, or commercial areas to enjoy pure water. You can also take it as part of your DIY water system for filtering water for drinking or getting concentrated maple sap.
• [Package Includes] 3012 RO housing x 1, Wrench x 1, 3/8" Inlet Elbow Fitting x 1, 1/4” Outlet Elbow Fittings x 2, Installation Guide x 1.

User questions & answers

Question:	What size filter does this housing take
Answer:	Hello, it is recommend to have about 50-60 psi going through these membranes. If you need any help or assistance, feel free to give us a call we are happy to help! Best Regards, APEC Support Team 800-880-4808.
Question:	O-ring in the cap there is not one. so is that right
Answer:	agreed. This is very confusing. I’m also looking for replace one of the filter, because water does not run through this one.
Question:	Can it fit 3013 filter
Answer:	This is the pre-filter set for our Essence Series under the counter RO systems.
Question:	Can I use it with 1812 membrane
Answer:	Almost certainly. I live in a small apartment, and had it installed on the balcony beside a utility sink and garden hose. Many people find it will fit under the kitchen sink -- that didn't appeal to me since I would have had to drill a hole in the countertop.

Product features

Membrane Solutions 3012 RO Housing for 200/300/400 GPD RO Water Systems

Please note to confirm the flow rate of your reverse osmosis water system is 200 GPD or above before choosing this 3012 membrane housing.

How to change a RO Housing and the Membrane

• Turn off the feed water supply line valve to the RO system and the valve on the water tank.
• Open the RO faucet and allow the pressure in the system to bleed off.
• Disconnect the tubing from the membrane housing cap by pushing down on the small ring where the tubing connects to the cap.

• Remove the membrane housing cap by turning counterclockwise.
• Use pliers to remove the used membrane if necessary, then insert the new membrane. The o-ring end goes in first until you feel it seats securely into the membrane housing.
• Replace and tighten the membrane housing cap. Reinstall the removed tubing to the appropriate fittings.

Important Information

• It is recommended that systems using these elements rinse the elements for 24 hours, prior to first use, to meet NSF/ANSI 58 Standard.
• The first full tank of permeate must be discarded. Do not use this initial permeate for drinking water or food preparation.

Product description

Description

SEAFLO's SFRO2-G100-3A has an incredible features list, high quality components, and amazing performance. SEAFLO also offers a variety of easy connect fittings and filters. This pump also features an electrical cord which can connect directly to any standard US outlet making installation easy and simple. The 100GPD 3A-Series is intended for use in water filtration systems and to increase water output of water pressure systems.



Details

BRAND NEW SEAFLO SFRO2-G100-3A Reverse Osmosis (RO) Booster Pump

100GPD Booster Pump intended use is for membranes rated at 100GPD

Sleek new black colored finish

RO Booster Pump comes bundled with a 110V Transformer

Plugs into your standard wall outlet for ease of use

Connects directly into your current water filtration system

Rubber feet with metal mounting bracket for vibrationless operation

Meets RoHS and CE Certification and made with food-grade material

Suitable for food grade applications

Technical specifications

Voltage: 24VDC RO Pump + 110V Transformer

Work Flow: ≥ 1.1 LPM

Open Flow: ≥ 2.0 LPM

Inlet Pressure: 30 PSI

Working Presure: 70 PSI

Current: ≤ 1.2 A

Rated Current: ≤ 1.8 A

Inlet/Outlet: 3/8"-14 FNPT

Dimensions: Approx. 7" x 4" x 4"

• 4-Year Warranty!!
• High Quality 24VDC Pump with 110V Transformer
• Comes with 110V Transformer to plug into wall outlet
• Connects to your current water system to boost water output
• Quiet and efficient operation

User questions & answers

Question:	Does it run constantly? What turns it on and off
Answer:	No. It would fit in the housing but the end would not seal properly and not filter as it should.
Question:	Is it ok to leave the pump on all the time or does it need an additional part like a pressure swotch
Answer:	I guess it's a NO. The 3012 means filter size fits this housing is 3x12 inch (ex. flow rate 200 GPD to 400 GPD).
Question:	can this pump from a holding tank with only 50 gal of gravity pressure to its inlet
Answer:	Hello, it is about 11.75" long. If you need assistance, feel free to contact us directly by calling 1-800-880-4808 or e-mailing us at [email protected]. We are in the office from Monday-Friday from 8:00am-5:30pm PST. Best Regards, APEC Customer Service
Question:	Does this unit come with 1/4 adapter for ro unit
Answer:	Yes, designed, produced, and assembled in the USA.

Product description

Alberts Filter 150 GPD RO Membrane with Housing

High-Quality Reverse Osmosis membrane can produce 150 gallons purified water per day.

You just need to open the faucet of the RO purifier using this RO membrane, you can get drinking water.

Compatible with most reverse osmosis systems, friendly design, easy installation.



High Contaminant Rejection

Alberts Filter RO membrane uses the most advanced membrane film technology and manufacturing processes, certified to NSF / ANSI 58, verified by independent laboratory testing.

This Polyamide Thin-Film Composite membrane effectively reduces TDS and sodium as well as a wide range of contaminants.

Such as Arsenic, Lead, Percholate, Chromium, Copper, Radium and Protozoan Cysts including Giardia and Cryptosporidium.

The heart of your Reverse Osmosis system reducing impurities down to 1 / 10,000 of a micron.





RO Membrane Specifications

- Size: 12" x 2.0"

- Flow Rate: 150 GPD @ 60 psi water pressure

- Average NaCl Rejection rate: 97%



RO Membrane Housing Specifications

- Material: FRP (Fiber Reinforced Polypropylene) + ABS

- Outside Diameter: 3.03"

- Length: 12"

- Connect Type: Thread

- Outlet Size: 1/4"

- Inlet Size: 1/8"

- Seal Material: NBR

- Burst Pressure Test: 500 PSI

- Water Hammer Test: 377 PSI, 100000 times back to the circle

- Fits following RO membranes: 24 GPD / 36 GPD / 50 GPD / 75 GPD / 100 GPD / 150 GPD



Operating Limits

- Maximum Operating Temperature: 113°F (45°C)

- Maximum Operating Pressure: 300 psig (21 bar)

- Maximum Feed Flow Rate: 2.0 gpm (7.6 lpm)

- pH Range: 2 – 11

- Free Chlorine Tolerance: < 0.1 ppm



What You'll Get

150 GPD-2012 RO Membrane * 1

RO housing * 1

Wrench * 1

Fitting * 2

Check Valve * 1

• 【High Quality & Profession】Alberts Filter provides you with various GPD high quality professional RO Membrane. If you only need RO Membrane of 50/ 75/ 150 GPD, you can search B07BPSFW2F on Amazon for reference.
• [DIY RO System] What You'll Get: ✔150 GPD RO membrane*1, ✔12" X 2.0" membrane housing*1, ✔Wrench*1, ✔quick connect fittings*3. Make your own reverse osmosis water filter right now! You don't need to buy an expensive all-in-one solution.
• [150 Gallon Per Day] Alberts Filter High-Quality Reverse Osmosis membrane can produce 150 gallons purified water per day (6.25 gallons / 23.7 liters per hour). 8 glasses of 8oz cups of water are recommended 1 gallon. You can get a gallon of water in about 10 minutes. You just need to open the faucet of the RO purifier using this RO membrane, you can get drinking water.
• [High Contaminant Rejection] Remove up to 97% of total dissolved solids from water. This membrane is only 0.1 nm, 50 times smaller than even the heavy metals and viruses, and around 5000 times smaller than becteria. So these RO membranes can easily remove heavy metal, harmful minerals and other soluble salts from water, ensure safety and non-toxic. Enjoy Your Water with Confidence! We provide worry-free service and water purification solutions, welcome to disturb us!
• [100% Performance and Quality Tested] Alberts Filter RO membrane uses the most advanced membrane film technology and manufacturing processes, certified to NSF / ANSI 58, verified by independent laboratory testing. There reverse osmosis membranes are made of the highest quality Polyamide Thin-Film Composite ensures that you get the most filtration and surface area coverage, let you enjoy high-quality taste.
• [Universal Compatible] Alberts Filter 150 GPD RO membrane is a universal standard size: 12" Overall Length, 2" Diameter (fit in commonly available housings). These reverse osmosis membrane elements are compatible with most RO purifier on the market. This reverse osmosis membrane can take place of CSM, FS-TFC, Axeon, Dow FilmTec, GE and other 2012-150 GPD model membrane. Friendly Design, Easy installation.
• [About RO GPD Ratings] GPD ratings are based on tests performed under specific water conditions (Urban tap water, 25°C / 77°F, 100 PSI).Every time the temperature drops by 1℃ / 33.8°F, the GPD Rating drops by about 3 - 4%; every time the pressure drops by 1 PSI, the GPD Rating drops by about 1 - 1.5%.For example, a standard 150 GPD RO membrane, at a temperature of 10°C / 50°F (or a pressure of 50 PSI), the GPD Rating is about 75.
• [Tips] Recommend work pressure is 100 psi when using this product in a Maple Syrup reverse osmosis system. And we suggest heating and maintaining the raw sap at 104°F(40°C) to prevent clog on the membrane while keeping it under 113°F(45°C) to avoid damage to the membrane due to over-high temperature.

User questions & answers

Question:	I ran this for 3 hours, 180tds in. 100 out. Not acceptable. Put my cheap 100gpd back in there and get 19ppm out
Answer:	The water source psi does not affect the pump since the pump would automatically adjust the outlet pressure. Be careful: What if your water source tank runs out of water: The pump will not automatically turn off.
Question:	Why do you state 400 gpd at 60psi when the manufacturers website clearly states it used 100psi at 77 degrees
Answer:	Buy two 3/8"-to-1/4" reducer adapters at Lowe's.
Question:	what is the wastewater to purified water ratio? can the flow restrictor be bypassed to flush
Answer:	The 2812/3012 is the size of the filter. They vary by gpd.
Question:	Does it constantly discharge reject water even when your not using pure water
Answer:	What do you mean by, "cap"? There are generally two O-rings on the product water end of the RO element. And there is a large O-ring just outside edge of the threads, in a groove just outside the threads, on the end of the housing. If by cap you mean the end that screws onto the threads at the back of the housing. There is no O-ring inside that component of the housing.

Product description

Features：200 GPD booster pump is designed for membranes rated 200 GPD. Max Pressure:123psi. Input: 110V/220V. Output: 24VDC; Frequency: 50/60Hz.thread parameter：Inlet/Outlet Threads for 3/8.Voltage: 24V. Max Current:2.5A. Inlet Water Pressure: 29PSI .Outlet Water Pressure: 73PSI .Work Flow Rate: >1900ML/M.

• Reverse osmosis 200GPD Diaphragm booster pump
• Increase your membrane performance if your municipality water pressure (PSI) rated low
• Safe power operation with, low energy (low voltage - 24 volt). Transformer included.
• Work Flow Rate: >1900ML/M.Open Flow Rate: >2500ML/M.Work Temperature:5°C-40°C
• Self-Priming Height:≥1.8M.Easy installation

User questions & answers

Question:	can you include a pressure switch (at added cost
Answer:	Before getting the 400gpd I had a 90gpd unit and my waste orifice was a 300. I'm supposed to run an 800. It ran perfectly for 18 months until I upgraded to the 400gpd. So for me, imo, running the orifice they suggest is a waste of good water. Maybe that much waste is needed for nasty well water or something but my water is pretty dirty at 500ppm and after 18mo my ppm output was the same as the day it was new. When I bought the 400gpd unit I only increased my restrictor to 450 which is about 1/8th the size you're supposed to run. This time I decided to add a bypass to flush it which I made using an electronic solenoid valve so I can do so while sitting on my butt on the couch. I call it turbo flush and not really sure how important it is to do but I figured I'd add it considering how small the waste orifice ratio is now. The way I see it is one hard blast with one gallon is better than many gallons at a trickle. I have also considered removing the waste orifice altogether and only turbo flushing it now and then, but I'll give my current setup a year to see what happens. I'm not sure exactly how much filtered water I use but I est 50gal/week. Not sure what the waste is on that with my setup but I'm guessing 10-15gal? Plus a couple for turbo flushes. Side note; the first quart of "filtered" water that comes out when I first turn it on is whatever the tap is. So if my tap is 500ppm then 500ppm is what comes out, then it quickly tapers down to about 16ppm after a quart has passed through it. This has not changed since it was new and my fix is to dump that the first quart which I again use a solenoid for. Something to think about because if it only tops off a gallon or so at a time, which is typical, then that's really killing your water. So I'd be sure to buy a ppm tester to see if yours does that, but it's kinda a must have item anyway so you can check how the system is doing. Also note I have much higher water pressure so if that 450 orifice is not self regulating (mine is in a big plastic container which suggests it's not just a simple orifice) then I guess I'm wasting twice as much? I suppose I should measure it... Whatever it is it's still much better than the 100-150gal/week I'd waste if I followed the directions. Considering I live in a water starved part of the country I think that would make a massive difference if the millions of other people in my area did the same. I mean if they went through all the trouble to make expensive low water toilets and all kinds of other stuff to save water then this seems like a no-brainer. Another note: You won't get the rated gpd unless dumping it into a bucket. In a normal system you have ~60psi water pressure filling a 40psi storage tank. This is why I bought the 400gpd unit, because the 90 was taking too long. I forget my actual flow but it was more like 25gpd, so with the 400 I get more like 100gpd, which is what I originally wanted. Fyi. As for the bypass, you can make one using a couple Y or T fittings to go parallel to the waste orifice, and have a 1/4 turn valve in it so you can turbo flush whenever you like. You can get a kit here with all those fittings and some for like $10. Or like me, I use a solenoid instead which I think cost $10, and that is turned on/off via a wif outlet I control with my phone. This is also how I turn my system on/off because the normal automatic setup was not cutting it, so I have three solenoids altogether. Best of luck and hope the above helps.
Question:	What is the max psi it produces at the max flow
Answer:	I should add that it does not dump water if it's plumbed correctly, because I've seen, more than once, where it was not and dumping 24/7. Speaking of wasted water, I also suggest a shutoff to greatly decrease your odds of coming home to a flooded kitchen. It happens a lot, maybe less now days but I've seen it and experienced it enough to think it's all but expected. I suggest a solenoid valve of some sort on a timer so if a hose pops off, fitting breaks, O-ring lets go or whatever while you're away or asleep it won't do too much damage. I use a cheap little $10 unit meant for these, plus I put a check valve after the outlet so the tank won't dump its contents either.
Question:	What is inlet and outlet size
Answer:	Your have to install a compatible (based on psi range of the pump and voltage) automatic pressure switch in ebay about $1.00 - $2.00 for the pump to automatically turn on and off.
Question:	What is the warranty duration
Answer:	This pump needs pressure switch

Product description

Alberts Filter 150 GPD Reverse Osmosis Membrane 2-Pack

High-Quality Reverse Osmosis membrane can produce 150 gallons purified water per day.

You just need to open the faucet of the RO purifier using this RO membrane, you can get drinking water.

Advanced membrane technology and automated fabrication allow these elements to deliver consistent performance.



High Contaminant Rejection

Alberts Filter RO membrane uses the most advanced membrane film technology and manufacturing processes, certified to NSF/ANSI 58, verified by independent laboratory testing.

This Polyamide Thin-Film Composite membrane effectively reduces TDS and sodium as well as a wide range of contaminants.

Such as Arsenic, Lead, Percholate, Chromium, Copper, Radium and Protozoan Cysts including Giardia and Cryptosporidium.

The heart of your Reverse Osmosis system reducing impurities down to 1/10,000 of a micron.



Compatible with most Reverse Osmosis Systems

11.75" Overall Length, 1.89" Diameter fits standard housings. Friendly Design, Easy installation.

For the standard housing, please search for the product ASIN: B07G99LK58 in Amazon for reference.

Can take place of CSM, FS-TFC, Axeon, Dow Filmtec, GE Osmonics, U.S. Water ( US Water ), Culligan,

Ametek, US Filter, American Plumber, Kinetico, Watts and other 2012-150 GPD model membrane.





Specifications

- Size: 11.75" x 1.89"

- Flow Rate: 150 gallons per day @ 60 psi water pressure

- Average NaCl Rejection rate: 97%



Operating Limits

- Maximum Operating Temperature: 113° F (45°C)

- Maximum Operating Pressure: 300 psig (21 bar)

- Maximum Feed Flow Rate: 2.0 gpm (7.6 lpm)

- pH Range: 2 – 11

- Maximum Feed Silt Density Index (SDI): 5

- Free Chlorine Tolerance: < 0.1 ppm



What You'll Get

150 GPD-2012 RO Membrane * 2

• 【 Standard Size 】 12" Overall Length, 2" Diameter fits standard housings. Friendly Design, Easy installation. For the standard housing, please search for the product ASIN: B07G99LK58 in Amazon for reference. If you need 100/ 150/ 400 GPD RO Membrane - 1 Pack with housing, you can search B07H2Z5ZJH on Amazon for reference.
• 【 High-Quality Membrane 】Our 150 GPD RO membrane uses the most advanced membrane film technology and manufacturing processes. And these RO replacement tested by our experienced technical support staff in the USA, So we can provide high quality for consistent and reliable performance.
• 【 150 Gallon Per Day 】Alberts Filter High-Quality RO membrane can produce 150 Gallons purified water per day (23.7 liters per hour). 8 glasses of 8oz cups of water are recommended 1 gallon. You can get a gallon of water in about 10 minutes. If you are cooking soup, for example, making a pot of tea or coffee, you have to empty out more than 2-3 water bottles. But now, you just need to open the faucet of the RO purifier using this RO membrane, you can get drinking water.
• 【 High Contaminant Rejection 】Remove up to 97% of total dissolved solids from water. This membrane is only 0.1nm, 50 times smaller than even the finest heavy metals and viruses, and around 5000 times smaller than bacteria. So these RO membranes can easily remove heavy metal, organic, rubber mass, harmful minerals and other soluble salts from water.
• 【 Standard Size 】150 GPD RO membrane dimensions: 12" Overall Length, 20" Diameter (fit in commonly available housings). These reverse osmosis membrane elements are compatible with most RO purifier on the market. This reverse osmosis membrane can take place of CSM, FS-TFC, Axeon, Dow FilmTec, GE and other 2012-150 GPD model membrane.
• 【 100% Performance and Quality Tested 】These RO membrane certified to NSF/ANSI 58, Verified by independent laboratory testing. Alberts Filter reverse osmosis membranes are made of the highest quality Polyamide Thin-Film Composite ensures that you get the most filtration and surface area coverage.

User questions & answers

Question:	Can i use this filter on the G3 RO water system
Answer:	3/8
Question:	Does the flow restrict or have to match the flow on the ro filter or the actual flow it will produce daily
Answer:	2000 hours continuous working
Question:	Is this compatible with iSpring RO systems
Answer:	I’ve been running for over a year now using about 20-50 gallons a day and still get 3tds outlet and 140-220 inlet depending on season.
Question:	Will this work on hydrologic stealth ro 150gpd
Answer:	Dear Customer, Thank you for your inquiry. Yes, our product can usually produce 400 gallons per day at 100 psi water pressure at 77℉. But we kindly suggest you use it in the RO water purifier instead of connecting it directly to tap water. I hope this could help you resolve your problems. Thank you!

Product description

Hydron BW-4040 Reverse Osmosis Membrane elements are 2400 gallon per day membranes with 99. 0% rejection and a minimum rejection rate of 98. 5% designed for commercial use. The BW-4040's advanced membrane technology and automated fabrication, allow these membranes to deliver consistent performance, superb contaminant reduction, and true reliability. Features that equipment suppliers, water treatment dealers and small water plant customers globally can rely on. Fits in standard 4"x 40" commercial RO membrane housings. Replacement for GE Osmosis Desal AG4040FF, GE Osmosis Desal AG4040TF, Dow Filmtec TW30-4040, CSM RE4040-BE and TW30-4040.

• Hydron 2400 Gallon per day Commercial Membrane
• Fits most standard 4x40 Commercial RO membrane housings
• 2,400 GPD, 99.0% rejection and a minimum rejection rate of 98.5%
• Hard fiberglass shell protects membrane and provides outstanding performance
• Made in Taiwan

User questions & answers

Question:	Is this for home drinking water from well
Answer:	Hi, Friend Yes, This RO membrane compatible with iSpring RO systems.
Question:	hello this membrane fix a Hydronix SPV-4040-34? , thanks for your help
Answer:	I put these on my 300gpd, which is actually 2 150gpd put together and they work fine.
Question:	Can you town water through this ro
Answer:	Do you need a high or low pressure switch to work with this pump, we have it, but not at amazon, it may take long time to prepare and send it to you, do you accept? Daniel
Question:	Is there a 2.5”X40” membrane
Answer:	There is relationship between the flow and pressure. The larger the flow is, the lower the pressure is. So when the flow is max flow (open flow 2500ml/min),the operating pressure will be zero.

• 💧MATERIAL SAFETY: MS Reverse Osmosis (RO) membranes are made from 100% food-grade Thin Film Composite (TFC) material for ultimate purification performance with high permeate flow, tested by an independent third-party to meet NSF/ANSI 58 standards, providing safe-clean drinking water.
• 💧HEALTHY DRINKING: 75 GPD RO membrane with a high 97% stabilized salt rejection rate. Hundreds of impurities are reduced by over 99% through the 0.0001-micron TFC membrane layer, including heavy metals (fluoride, calcium, magnesium, lead, colloids, chromium, and nitrates), organic materials, and harmful minerals, including other soluble salts found in water resources.
• 💧UNIVERSAL MEMBRANE SIZE: Industry-standard element size 11.75 x 1.75-inch, designed to fit in standard 1812/2012 residential-style RO membrane housings utilizing a 2-inch internal diameter. Suitable for most Reverse Osmosis Water Filtration System.
• 💧WIDE COMPATIBILITY: Reverse osmosis water filter replacement for standard membranes including but not limited to AXEON TF-1812-75, Dow Filmtec TW30-1812-75 (BW60-1812-75), FS-TFC TFC-1812-75, GE TFM-75, Geekpure GP-TW-1812-75G, iSpring MC7, Pentair TLC-75.
• 💧LONG-LIFE: The membrane element, shipped dry in an original sealed package, has a life expectancy between 24 to 36 months, based on average feedwater quality, temperature, and incoming water pressure.
• 💧ON-DEMAND SUPPORT: Assistance is available from our experts, ready to answer any of your questions about your RO membrane. Have a concern or question? American based customer support is available for the life of the product. Welcome to the Membrane Solutions Family.

Product features

Membrane Solutions Reverse Osmosis Membrane Element

Residential Reverse Osmosis(RO) systems are widely used to provide safe-to-drink water for families and light-commercial use. As the main filtration stage of the RO filtration system, MS RO membranes deliver consistent performance for all users with advanced membrane technology and automated spiral-wound fabrication.

MS RO membrane elements, NSF/ANSI Standard 58 certified, have a high permeated flow while keeping a 99% TDS removal rate, and stabilized salt rejection rate by 97%. It can efficiently remove contaminants like heavy metals including primary fluoride, calcium, magnesium, lead, colloids, chromium, and nitrates, as well as organic, rubber mass, harmful minerals, and another soluble salt from water.

Important Information

• It is recommended that systems using these elements rinse the elements for 24 hours, prior to first use, to meet NSF/ANSI 58 Standard.
• The first full tank of permeate must be discarded. Do not use this initial permeate for drinking water or food preparation.
• Keep elements moist at all times after initial wetting.
• To prevent biological growth during prolonged system shutdowns, it is recommended that membrane elements be immersed in a preservative solution. Rinse out the preservative before use.
• The membrane shows some resistance to short-term attack by chlorine (hypochlorite). Continuous exposure, however, may damage the membrane and should be avoided.

Product description

1/8" thread Quick Connect Elbow for 1/4" Reverse Osmosis tubing, 10 pcs This fitting uses with RO membrane housing.

• 1/8" thread Quick Connect Elbow for 1/4" Reverse Osmosis tubing, 10 pcs

• 2400 Gallon Per Day Membrane for Commercial Reverse Osmosis systems.
• Iron and Manganese is oxidizing. We recommend using a manganese sand filter to filter manganese. Excessive manganese will damage the RO membranes. Generally we require feed water manganese less than 0.5mg/L
• Removes particles down to 1/10,000th of a micron (removing 98% of impurities including organic, inorganic contaminates, chemicals, ETC.).
• Provides stable, high rejection of contaminates even with high TDS water sources.
• It is applicable to the desalination of municipal water, groundwater with salt concentration less than 1000ppm. It can be widely used in pure water preparation, maple sap collection and related industries.

User questions & answers

Question:	Hi iam a newbie to this i wanted to know is there an installation video , that i can use to be able to install this for my home
Answer:	Yes
Question:	Can i order with all 1/2" ports
Answer:	Yes
Question:	ii purchased this unit a few weeks back and the connections are leaking.i have tried both pipe dope and teflon do you have any ideas that will seal it
Answer:	Not certain. Not enough information provided as there are many manufacturers of RO systems classified as a model "G3".
Question:	Can a 2.5" x 40 membrane be used in this housing
Answer:	All RO filters require a restriction to build up enough of a back pressure to force water through the membrane. The GPD rating is the good RO water produced under ideal operating conditions and pressures. EX: I ran 150 GPD membrane at 80 psig into an open tank and produced 80 gallons per day.

Product features

XLP-4040 2400 GPD Commercial RO Membrane

Detailed Description

• Reverse Osmosis membrane elements for commercial drinking water systems are the industry's most reliable method of water filtration. Advanced membrane technology and automated fabrication allow these elements to deliver consistent performance that equipment suppliers, water treatment dealers, and residential customers can rely on. Our Reverse Osmosis membranes are shipped dry for convenient handling and long shelf-life. Our ISO9001 rated membranes are rated at 60 psi and will purify about 20% more water than competitive elements rated at 60 psi.
• XLP-4040 standard flow is 2400 GPD @ 100 PSI ,Now if you the reduce pressure to 60 PSI,pressure reduced 40% ,therefore permeate flow will be approximately 1440GPD
• We suggest changing your membrane every 2 years.
• Iron and Manganese is oxidizing. We recommend using a manganese sand filter to filter manganese. Excessive manganese will damage the RO membranes. Generally we require feed water manganese less than 0.5mg/L

NOTE: Exercise care in choosing the correct membrane element, as usage in unintended applications can cause severe problems and reduce the lifespan of the membrane element significantly (ie. lifespan reduces from 2 years to 2 months, or even weeks).

Usage

XLP-4040 Reverse Osmosis Membranes are applicable to the desalination of municipal water, groundwater with salt concentration less than 1000ppm. It can be widely used in pure water preparation, maple sap collection and related industries, and best suited for small electronic industrial, boiler, beverage and other applications.

Commonly referred to as: Extra Low Pressure, Extra Low Energy, Ultra Low Pressure, or Ultra Low Energy.

4" x 40" Fits nearly all standard 4" x 40" Membrane Housings Stainless Steel, PVC, or Fiberglass.

Product description

Enjoy unlimited ultra-fresh, clean, great tasting water right at home for the best quality water for cooking and making delicious coffee, ice. Save money, time, and hassle of buying costly, bottled water and live healthier with ultra-safe water that is contaminant free. The ROES-50 reverse osmosis system has been tested and certified to the highest standard in the industry- WQA gold seal to deliver the highest quality clean, filtered drinking water at an affordable price. This complete 5-stage water filter system is made from high caliber components to offer exceptional contaminant rejection rates and long-lasting, reliable performance. Designed engineered and assemble in the USA by leading reverse osmosis manufacturer APEC Water Systems, the ROES-50 is an affordable workhorse with a proven lineage of success in water filtration. to remove up to 99% of all contaminants, such as chlorine, taste, odor, toxic fluoride, arsenic, lead, and chromium. This efficient and productive or system will provide your family with trouble-free, high quality drinking water for many years to come.

• Supreme quality - designed, engineered, and assembled in USA to guarantee water safety & your health.
• Only technology to remove up to 99% of contaminants such as chlorine, taste, odor, VOCs, as well as toxic fluoride, arsenic, lead, nitrates, heavy metals and 1000+ contaminants. Max Total Dissolved Solids - 2000 ppm. Feed Water Pressure 40-85 psi
• WQA Certified System. Premium long-lasting filters used to treat tap water, well water. Provide unlimited clean, refreshing crisp tasting water superior to bottled water
• America's No.1 rated water filter brand with 20 years of success guaranteeing trouble free, noise-free system for long lasting, dependable, pure drinking water.
• System comes with 100% lead-free designer faucet, plus Certified JG Food grade tubing and parts to provide safe, contamination-free pure water.Pipe Size: 1/4 inches
• 2 year extended manufacturer warranty with registration. System comes with all parts and industry's best instructions and videos for an easy DIY experience.
• High quality leak-free quick connect fittings require no extra lock clips to seal leak, and does not rely on water leak detector to protect your home like other brands.

User questions & answers

Question:	How big is the system? How much space do we need in the under-sink cabinet
Answer:	tank is 15x11 and filters are 15x17 I have mine mounted on wall in garage. takes up a lot of space for under the sink
Question:	How much does a single set of stage 1-3 filters cost? Where can we purchase them
Answer:	$32.30 for one whole set or $50.00 for 2 sets.https://www.amazon.com/APEC-Water-FILTER-SET-ES-Standard-Pre-Filter/dp/B00I11HUGW/ref=sr_1_1?srs=9433327011&ie=UTF8&qid=1470691669&sr=8-1&keywords=apec+filter-set-eshttps://www.amazon.com/APEC-Water-Systems-FILTER-SET-ESX2-Replacement/dp/B00SSA7OBM/ref=sr_1_2?srs=9433327011&ie=UTF8&qid=1470691669&sr=8-2&keywords=apec+filter-set-es
Question:	Does this filter remove hormones
Answer:	The answer "ROES-50 system uses a high quality, .0001 micron Reverse Osmosis membrane and 3 carbon filters so it is designed to remove high levels of hormones and pharmaceutical drugs from water" is troublesome. Terms like "high quality" and "high levels" are arbitrary, and it's a safe bet people don't want arbitrary amounts of contaminants removed.
Question:	Hi apec, i see your offshore imitator is offering transparent 1st stage filter housings, why don't you offer one as well
Answer:	I bought the ROES-50 RO system in January 2016 and for the most part it has been great. Bought the pump to go with it as well as an auxiliary accumulator tank to use in addition to the smaller bladder tank that comes with the system so we can draw a couple of gallons of RO water at near full pressure at one go (set to 60 psi), and have the output plumbed to the sink faucet and two refrigerators with ice makers and water dispensers. I say all of this to say that I change the filters quite a bit and that it would be nice to be able to see the condition of the filters without having to shut off the supply from the house plumbing, and shut off both of the pressure tank valves as well as the system backfeed valve I installed just to get a look at the filters. I have a well and have two of the "dreaded" clear Whirlpool whole home water filter units, one at point of entry before the well bladder tank, and one after my water softener system and before my UV sterilizer, both of which have been in service for 18 years without issue. Everything is installed in my utility room on the wall for easy access, and I replace the O-rings in the filter housings about every third filter change and wash the housings out with a bleach solution, rinse them well and lubricate the O-rings with silicone grease when installing new filters every time I change a filter, and never ever tighten any of them tighter than hand tight unless there is a drip, but I can't recall there ever being one. I don't understand why people have filter housings break unless they are being over tightened, installed in a harsh environment exposed to the elements, or somewhere where they are subject to being hit with things and getting damaged physically, or in direct sunlight and subjected to UV radiation. Therefore I wish there was an option to purchase clear housings for the ROES-50 filters in order to make proper maintenance as easy as the rest of my system, because other than that, the only complaint I have with the ROES-50 is that the white bladder tank that came with it leaks air and I have to repressurize it about every six months. The larger blue auxiliary tank I bought has yet to need to be repressurized.

Product features

Super Efficient APEC Carbon Blocks

Our double carbon blocks are uniquely designed in achieving the maximum possible chlorine & chemicals removal in drinking water. The extremely large carbon block surface maximizes contact time to assured water purity and multiplies lifetime of filters and membranes.

True Leak-Free Fittings Protection

Our high quality fittings come with stainless steel teeth for a guaranteed grip, and special o-ring provides a leak-proof seal. No extra clipping parts and leak detector needed. For your peace of mind.

Superb Taste & Water Purity

APEC's premium quality products result in excellent refreshing taste and water purity that is more distinctive than any other brands.

Easy Installation and Maintenance

Easily DIY your RO system by following step by step online installation videos and detailed instruction manual. Just set it and forget it.

Product description

As America's favorite brand of reverse osmosis systems, and backed by iSpring’s industry-leading customer support, the RCC7AK is unequaled in quality, performance, and durability. The system consists of 6-stage, layered filtration built around precision reverse osmosis (RO) technology that removes over 1000 different kinds of contaminants in order to provide the best home drinking water filtration available. Unlike some other systems, the combination of both GAC and CTO filters in the 2nd and 3rd stages provides extra layers of protection against harmful chemicals than CTO alone. It features a 75 gallon-per-day capacity RO membrane, which is larger than most in its class and provides the capacity to economically handle the drinking water needs of even a large family.



After flowing through the initial 5 stages of the iSpring RCC7 line of Reverse Osmosis filtering products, the RCC7AK model adds another Alkaline Remineralization (AK) stage. This stage is designed to restore the natural alkalinity and mineral balance of the water. The RO process effectively generates pure water but it also removes a few helpful minerals in the process. The red mineral stone portion of the AK filter adds back healthy minerals including not just calcium, but also other beneficial minerals, like magnesium, that other systems don't. The calcite portion of the filter neutralizes the pH of the RO water. And the water tastes better too. Because RO water is so pure, some people may find it tastes unnatural. Many people prefer the more natural taste that comes from the presence of some minerals in the water. Remineralization restores just the right proportion of healthy minerals.

Designed for do-it-yourself installation by most users, the entire system fits nicely under a standard kitchen sink. Installation is straightforward and all parts necessary for installation are included. You are guided by clear, well organized written instructions, instructional videos and access to iSpring’s unparalleled technical support. The system is quiet and low maintenance with no moving parts. Replacement filters are standard sized and sold at factory direct pricing. A lead-free, solid brass faucet with brushed nickel finish is included with the system and is usually mounted on the counter as the primary source of drinking water, but output lines can also be connected to your ice maker, coffee maker, etc. The whole system is backed by a 1-year money-back guarantee, a 1-year manufacturer warranty and iSpring's unique lifetime technical support provided right here in the USA in Alpharetta Georgia. With the iSpring RCC7AK, enjoy crisp-tasting, bottled quality water, every day, right in your home.

• Incoming Water Pressure: 45 PSI - 70 PSI
• Operating water temperature range: 40 – 100 °F
• Maximum TDS: 750 ppm

Install this RO system in a location where it is safe from hot/cold weather and direct sunlight. Avoid hitting, dropping, or dragging the system as this can cause cracks and leaks

• Certified to NSF/ANSI 58, 6-Stage Alkaline Remineralization Layered Filtration: Exclusively designed to restore the natural alkalinity and mineral balance of water; this reliable and ultra-safe Reverse Osmosis (RO) water filtration system converts your water into clean, pure and healthy drinking water by removing up to 99% of over 1, 000 harmful contaminants like chlorine, fluoride, lead (removes up to 98%), arsenic, asbestos, calcium, sodium and more.
• BENEFITS: The iSpring RCC7AK water softener includes an additional sixth stage - an Alkaline Remineralization filter which restores healthy minerals and produces a balanced alkalinity, which gives your water a more natural taste than regular 5 stage RO water filter; the RO membrane removes not only harmful pollutants but also a few helpful minerals. As a result, a standard 5 stage RO system produces slightly acidic water with a pH of 7. 0 or below
• FEATURES: Beautiful European-Style kitchen faucet. Transparent 1st stage housing for easy visual inspection. Three extra long life pre-filters to remove large contaminants and protect RO membrane. Ultra fine (RO) filter to remove contaminants down to 0. 0001 microns; fine GAC filter to provide final polishing to the purified water and (AK) filter to finally restore just the right proportion of healthy minerals and a natural alkaline balance. The end result is great-tasting bottled-water quality
• EASY DO IT YOURSELF INSTALLATION: The water purifier is designed for do-it-yourself installation and all necessary parts for installation are included, backed by clear, well-organized written instructions, instructional videos, and access to iSpring unparalleled technical support. The entire alkaline water filter fits nicely under a standard kitchen sink. For leak-free installation, simply push tubing ½ inch deep into quick-fitting connectors and lock; no threading pipes needed
• 100% SATISFIED CUSTOMERS: RCC7AK from America’s favorite brand of under sink water filter is the No. 1 rated reverse osmosis systems in the USA backed by iSpring extended manufacturer upon registration and lifetime personalized support from GA, USA, combined with premium quality components, this water filter is to deliver endless bottled quality drinking water right in your home for many years to come, eliminating plastic bottles

Product features

Reinforced Transparent 1st Stage Housing

Provides an easy way to visually inspect the sediment filter and view the contaminants being removed from your water. With the transparent housing you will know it is time for a filter change before a problem occurs.

Finest Micron, Layered Protection

The advantage of having both 5-micron GAC & CTO filters is that loose carbon (GAC, KDF) is better at trapping large contaminants, leaving only smaller ones to the CTO carbon block filter. This allows the CTO filter and RO membrane to function at their maximum efficiency and last longer.

Leak-Free System & Online Supporting Videos

Push to connect fittings and color coordinated tubings simplify the installation process and prevent leaking. We know that high percentage of our customers prefer Do-it-yourself installation. We are investing in video production and aftermarket platform to provide our customers the resources needed to have successful installation and maintenance.

Live Phone Support

We offer technical phone. Contact our expert support team for personal assistance in selecting the right system for your water filtration needs. Now, and years from now, we will be right here and ready to help.