9 best pull handle for glass door

• Quality 1.2mm Wall thickness, high-endurance grade-304 stainless steel Handle Grip , Solid grade-304 Stainless Steel mounting standoffs offer a 4.6mm/0.18" efficient deepest occlusal length with 4 SUS304 hexagon socket set screws. TOGU TG-6012 series SUS 304 push pull handles feature a distinctive and durable structure with strong resistance to rust, corrosion, and deformation for an everlasting lifespan without looseness, let every of your dollar have the highest cost performance.
• Finished in perfect textured brushed stainless steel with chamfered edges to avoid any unexpected accidental injury, TOGU TG-6012 36"/900mm size provides a Grip/Handle length of 900mm /35.433 inches, hole to hole distance 760mm/29.921 inches, Cross-Section Diameter 32mm/1.26 inches, with a pair of 95mm/3.74" stainless steel 304 fastening hex socket screws to fit most doors up to 75mm/2.95" thickness.
• You don't need to spend even one more penny to buy any more tools for its installation, since two sizes installation hexagon wrenches as well as a complete backup accessory pack are offered inside with a clear instruction manual to finish the whole installation effortlessly.
• Each purchase of TOGU push/pull handles comes as a PAIR of door pulls for the inside and outside of a single door, or you can use it as 2 single-sided handles for 2 different doors. If you want to install back-to-back handles for double doors, 2 pairs are required.
• With a commercial comfortable hand feeling and elegant, clean design, TOGU TG-6012 door handles can be used as Entry/Entrance door handles, wood or glass door pulls, interior/exterior entrance/entry door pull handles, and barn sliding door knobs/handles to coordinate all modern decorations. Experience TOGU industrial commercial quality and create your clean, modern home decoration with TOGU manufacturer wholesaling price!

User questions & answers

Question:	Bought this in September. One of the handles is very loose at the connectors and wablbles on the door. Any way to fix this
Answer:	Yes, I put one in in the spring and it has been working good so far.
Question:	If I want to do a one sided instillation do I need to drill completely through my door (and out of the other side) or can I do a recessed instillation
Answer:	I installed this on my 2012 Ford Edge SEL AWD because the door ajar message wouldn't stop. I also use my keypad all the time, and everything has worked out perfectly since the installation several months ago.
Question:	Any advice on installation on 20 gauge steel exterior door? Lock guy concerned about denting door during installation
Answer:	yes as long as your vehicle came with keyless entry from the factory and as long as that system is working properly, this is just 1 part of the keyless entry system.
Question:	will these work on 1 3/4 thick doors
Answer:	It has to do with your key system. Call the dealer parts department have them run your vin and ask them if you have passlock security. I replaced mine because my done light for the passenger front door light switch was not working.

Product features

Extraordinary Material

Constructed from 1.2mm Wall Thickness Top-Grade Stainless Steel 304 Raw Material, TOGU TG-6012 series SUS 304 push pull handles feature a strong resistance to rust, corrosion, and deformation for an everlasting lifespan.

Unique Solid Standoffs

TOGU unique solid SUS304 mounting standoffs offer a distinctive and durable structure without any looseness for an everlasting lifespan. This structure is usually used for bank doors, public doors which needs the strongest structure for a huge flow of people.

Special Chamfered Edge

TOGU special treated chamfered edges protect you and your families from any unexpected accidental injury and a more comfortable hand feeling with an elegant, clean design.

Complete Fittings Pack

if your wooden door needs long screws, please send us a message, and we will send the accessory pack including the screws you need for free.

• 1. Quality 1.2mm Wall thickness, high-endurance grade-304 stainless steel Handle Grip , Solid grade-304 Stainless Steel mounting standoffs offer a 4.6mm/0.18" efficient deepest occlusal length with 4 SUS304 hexagon socket set screws. TOGU TG-6017 series SUS 304 push pull handles feature a distinctive and durable structure with strong resistance to rust, corrosion, and deformation for an everlasting lifespan without looseness, let every of your dollar have the highest cost performance.
• 2. Finished in perfect matte black with chamfered edges to avoid any unexpected accidental injury, TOGU TG-6017 24"/600mm size provides a Grip/Handle length of 600mm /23.62 inches, hole to hole distance 400mm/15.75 inches, Cross-Section Specification 15mmX30mm/0.59X1.18inches (FrontXSide), with a pair of 95mm/3.74" stainless steel 304 fastening hex socket screws to fit most doors up to 2.56" thickness.
• 3. You don't need to spend even one more penny to buy any more tools for its installation, since two sizes installation hexagon wrenches as well as a complete backup accessory pack are offered inside with a clear instruction manual to finish the whole installation effortlessly.
• 4.Each purchase of TOGU push/pull handles comes as a PAIR of door pulls for the inside and outside of a single door. If you want to install back-to-back handles for double doors, 2 pairs are required.
• 5.With a commercial comfortable hand feeling and elegant, clean design, TOGU TG-6017 door handles can be used as Entry/Entrance door handles, wood or glass door pulls, interior/exterior entrance/entry door pull handles, and barn sliding door knobs/handles to coordinate all modern decorations. Experience TOGU industrial commercial quality and create your clean, modern home decoration with TOGU manufacturer wholesaling price!

User questions & answers

Question:	Can it be used for outdoor? Suitable for winter weather
Answer:	yes just keep in mind this is the lock actuator and not the latch, if you just need the lock actuator, then this will work fine, if the latch or cables are damaged, then the entire unit is needed and I believe it is only available through a dealership.
Question:	what is the dimension from the door to the outermost face of the handle? Overall dimension
Answer:	Yes this fits the front right of a 1998 Lexus GS300, the chart data should be updated soon, Also please keep in mind this is the electric lock actuator only and the latch and cables are not always needed, but they are not included with this.
Question:	Is this product ok for a shower door? Wet location
Answer:	This is for the front left or driver-side front door only, here is a link to the front right (Passenger-Side): https://www.amazon.com/gp/product/compatibility-chart/B00QB4F84C/ref=au_pf_dp_chart

Product features

Extraordinary Material

Constructed from 1.2mm Wall Thickness Top-Grade Stainless Steel 304 Raw Material, TOGU TG-6012 series SUS 304 push pull handles feature a strong resistance to rust, corrosion, and deformation for an everlasting lifespan.

Unique Solid Standoffs

TOGU unique solid SUS304 mounting standoffs offer a distinctive and durable structure without any looseness for an everlasting lifespan. This structure is usually used for bank doors, public doors which needs the strongest structure for a huge flow of people.

Special Chamfered Edge

TOGU special treated chamfered edges protect you and your families from any unexpected accidental injury and a more comfortable hand feeling with an elegant, clean design.

Complete Fittings Pack

You don't need to spend even one more penny to buy any more tools for its installation, since a complete backup accessory pack are offered.

Product description

Description:



- Accent your home design today with these beautiful glass cabinet knobs and drawer pulls.

- This small crystal knob can have a magical effect in decorating a room. the crystal knobs shine in the light and make splendid visual effects in the room

- Being beautiful, practical, and economical, the small crystal has recently been popular for decoration.

- The glass knobs and pulls are great for cabinets, dresser, kitchen cabinets or cupboards.



Specification:



- Material: crystal glass + zinc alloy

- Dimension：Knob height: 31mm

- Crystal diameter: 30mm

- Base diameter: 21mm

- Screw length 30mm

- Alternative metal gaskets for better fixation

- Color: Clear



Package Included:



- 10X Clear crystal knobs(30MM)

- 10X Metal gaskets

- 10X 23MM Screws

- 10X 26MM Screws

- 10X 30MM Screws

• Crystal and Zinc alloy - Practical, and Economical for Decoration
• Clear design - Very nice, Fashionable, Attractive to Decorate an Elegant Room.
• Crystal diameter: 30mm/1.2"; Knob height: 31mm/1.22"
• Perfect for Cabinet,Dresser,Drawer,Wardrobe,Door,Bin, Cupboard ect
• 3 Kinds of Mounting Screws and Enough Metal Gaskets are Available to Make the Knobs Suitable for Any

User questions & answers

Question:	What size screws fit a bathroom vanity cabinet knob
Answer:	The installation is very straight forward. I don’t think you will be able to tight the hardware soooo hard at the point of dent a door without snaps the handle hardware.
Question:	can this be used for closet doors without the second piece and then can the second piece be used on another door
Answer:	Yes, definitely. It works for up to 60MM/2.36inches thickness doors.

• ❤HIGH QUALITY❤:Made of clear cut crystal glass and zinc alloy plate,Sparkled,glittering and sparking,diamond shape,especially suitable for cabinets,looks more elegant and gorgeous
• ❤Including break-away screws:❤ the dimensions of knob is 6.7" x 1.2",the diameter of diamond glass is 1.2",come with break-away screws for each knobs, can DIY use as 6 different length of 21 mm,26 mm,31 mm,36 mm,41 mm,48 mm
• ❤MULTI-PURPOSE❤: Whether used to replace old handles or to fit on a new cabinet, it makes the furniture cabinet sparkle,perfect for doors for any purpose such as drawer door, wardrobe door, cabinet door, cupboard door, also for cabinet dresser drawers cupboard wardrobe bookcase.Great helper to pull out drawer,cabinets and other furniture
• ❤Single hole knobs style and Super easy to install❤:Only one hole in the middle, just drill a hole on cabinet and pass through the screw from the back of board and thread tight to the knob
• ❤Wonderful feel in the hand❤:The crystal knobs touches comfortable and has a perfect texture.The knob is actual crystal glass cut to a diamond shape with silver ends. It sparkles and looks very beautiful,which has a magical effect in decorating

User questions & answers

Question:	What is the Size please
Answer:	from the door to the bottom is 1 5/8, to the top of the handle its 2 13/16. This is on a 2 foot handle.
Question:	Is the center stone 40 mm big
Answer:	Not sure. I used it on a decorative barn door
Question:	Will these tarnish and will they rust if exposed to water spills
Answer:	There is a long SUS hexagon socket head cap screw connecting the handle grip and the mounting outstanding. So just use a matching hex screw wrench, then it can be tightened.
Question:	Do you need to screw in the plates or just the knob
Answer:	You have to drill completely through out the door.

Product features

Crystal glass cabinet handles

Apply for:dresser drawer,bedside cabinet,TV stand,table cabinet,washstand,closet,wardrobe,wall chest,cupboard;

Easy to install:

Firstly, you need to find the position where you want to install on the board and drill a hole;

Secondly, pass through the screw from the back of board and thread tight to the knob. Be careful during the work;

Modern drawer pull with stunning diamond-like inlay

Material:The knob is well made from Zinc Alloy+Glass Diamonds,It looks nice and is perfect for most of your projects at home;

Plate: 6.7" x 1.2"/ 16.9 x 3 cm (Length x Width )，

Diamond glass: 1.2" x 1.2" / 3 x 3 cm （Diameter x Height）

With break-away screws and washers,fits most thickness drawer board

Packing including:

10pcs crystal drawer knobs;

10pcs zinc alloy plate;

10pcs break-away screws;

10pcs washers;

Product description

SPECIFICATIONS

-Material : SUS304 Stainless Steel

-Finish : Polished Steel finish





USES

usege: In all the bathroom door and toilet door, belong to the home of the glass door shake handshandle



Buy from Alise

Solid metal construction, ensuring quality and longevity

SUS304 Stainless Steel Strong and durable, long service life, not easy to rust or oxidation

30-days return guaranteed

• Solid SUS304 Stainless Steel Construction, Ensuring Quality And Longevity
• Single Sided Cylinderical Knob,Easy installation ,Convenient to grip.
• Fits 3mm(1/8 Inch) to 15mm(5/8 Inch) Thick Glass
• Beautiful Polished Chrome finish will not rust,build to resist daily scratches,corrosions and tarnishing.
• Sturdy and durable,easy to install,Ideal for your modern shower enclosure.

User questions & answers

Question:	Is this available in brushed nickel
Answer:	Thanks for your question. We do sell this at a 70 inch height as well. If you have any questions or concerns we'd be happy to help at 1-800-45-BASCO.
Question:	What’s the diameter of the plastic washer
Answer:	Look up at instruction paper to contact company for missing parts.
Question:	Can I buy just the plastic washer So
Answer:	Seemed to me that it weighed much more. I could barely lift it
Question:	Can I use on the frame of a shower door
Answer:	Yes, this will work. Please know the header and threshold are shipped long so you will cut them to size.

Product description

SPECIFICATIONS

-Material : SUS304 Stainless Steel

-Finish : Brushed SUS304 Stainless Steel finish





USES

It uses: In all the bathroom door and toilet door, belong to the home of the glass door shake handshandle



Buy from Alise

Solid metal construction, ensuring quality and longevity

SUS304 Stainless Steel will not rust, strong and durable, long service life



Exclusive Brand, Production and Marketing Integration,Quality Assurance;

We choose the best materials, the most exquisite product technology, and the best quality service.



We promise each product from the production assembly to the sales, each link strictly checks, to ensure that customers get the best quality products and services.

30-days return guaranteed

Our company holds our customer is the purpose of God to communicate with customers for customer service!

If you have any problems with the product or installation, please feel free to contact the Alise After-Sales team and we are happy to help you！

• Constructed from high quality SUS304 Stainless Steel,ensuring quality and longevity
• Double Sided Cylinderical Knob,Easy installation ,Convenient to grip.
• Fits 3mm(1/8") to 16mm(5/8") Thick Glass
• Brushed Nickel finish stainless steel will not rust, build to resist daily scratches,corrosions and tarnishing.
• Solid metal structure, strong and durable, long service life

User questions & answers

Question:	Hello. Will this knob fit the shower door hole that is 10mm in diameter
Answer:	the center stone of small size is 25 mm, and the center stone of larger size is 30 mm. the one you refer is small size , so it's 25 mm center stone.
Question:	Can this be used with a standard 3/8” (9.5mm) tempered glass shower door
Answer:	I have them installed on my bathroom cabinets. It has been about 4 months now and I show no wear and tear from water damage. I get so many compliments and they are very rich looking. I am extremely happy with this purchase.
Question:	What is screw size, i need M6-1.0 size
Answer:	the screw will connect the plates and knobs，so you need screw in the knobs. Any questio please feel free to contact us. Best regards Fvstar pre-sale service team
Question:	will these work on a regular wood door
Answer:	Please don’t buy these, as lovely as they are I could never use them as they didn t come with screws and I could not find any to fit them anywhere
Question:	Are these for Outdoor use also
Answer:	That was my intended use as well. They aren’t 2 separate handles that I could tell. It was more like a big metal rectangle. Maybe I didn’t understand how to separate them but I sent it back.
Question:	Can one packages of these be split for the outside of two double doors? Or do they have to be installed back to back
Answer:	I used this handle on my side gate in Southern California. The finish has held up well in the heat,sun, and pollution. It's a good value for the price. However, the handle is hollow so iI wouldn't use it on my front door.

Product description

Surface mounted, no mortising required, universal design. Diecast inside pull with hardwood handle.

• Used on sliding glass doors
• 6-5/8 in. hole center space
• Polished chrome plated finish
• Diecast support brackets with wooden pull handle
• Designed to be used with flush type locks

Product description

This sliding glass door pull handle is constructed of diecast mounting posts and a wooden handle. The mounting posts come finished in black colored paint, and the wooden pull handle comes finished in a clear finish. Note: Color of wood may vary per shipment. This pull handle can be installed on doors with mounting hole centers ranging from 6-1/2 in. to 6-5/8 in. center-2-center. This pull handle is surface mounted and is used by many patio door manufacturers. This item features a sturdy metal backer support behind the wood.

From the Manufacturer

This sliding glass door pull is constructed from hardwood. It features one-piece reinforced brackets finished in black. This type of pull is used with different manufacturers and is easy to install.

• This pull handle is used to provide for an easier grip and push/pull operation on sliding patio doors
• This pull handle will fit on sliding doors with mounting hole centers ranging from 6-1/2 in. to 6-5/8 in. center-2-center measurements
• Mounting posts are black in color and the wooden pull comes in a clear finish. Note: Color of wood may vary
• Mounting posts are constructed of diecast

User questions & answers

Question:	Is there a right and left or do you just reverse the handle
Answer:	Glass doors are much thinner. It’s been awhile but I’m thinking the door can only be an inch or so.
Question:	Can this be adjusted (with the screws on the back) for 6 7/8" hole spacing? Or is the metal all one piece
Answer:	Yes, indoor and outdoor
Question:	How many inches between the screws
Answer:	They have to be installed back to back.
Question:	Does it comes with its own black screws
Answer:	Plate:4.7" x 1" / 11.9 x 2.5 cm (Length x Width); Diamond glass:0.8" x 0.8" / 2 x 2 cm (Diameter x Height) You can check the picture in descriptions.

• SUPERIOR QUALITY -- Solid stainless steel,brushed surface,anti-rust anti-corrosion ensures years of beauty and longevity.All items have been multiple inspected before on market.
• FINE DESIGN -- Smooth polished chamfered edges,ergonomically design prevent any unexpected injury and provide a more comfortable handing feeling.
• DUAL USE -- Fit for Glass Door (between 1/4''and 1/2''(6mm~12 mm) ) and Wooden Door (between 1-3/8'' and 2- 3/16''(35~55 mm) )
• PACKAGE -- Bar Pull Handle,Round Pad,Screw for glass door,White rubber pad for glass door,Screw for wooden door.
• 24 HOURS STAND BY -- EaseLife specialize in sliding door and hardware many years,if there anything missed or broken,pls let us know,we are whole day online to solve your problem.

User questions & answers

Question:	Does this door pull come in an 8” size
Answer:	it was a little short for a door thickness of 2 1/4",it was Fit for Glass Door (between 1/4''and 1/2''(6mm~12 mm) ) and Wooden Door (between 1-3/8'' and 2- 3/16''(35~55 mm) )
Question:	Do you have a model with 12" between mounting holes
Answer:	it fits good, with stripes
Question:	Will this handle work on a steel door
Answer:	Hello, It looks like pretty much the same bike but I’m not quite sure, I purchased it for a 2016 Vulcan s 650, I just looked at the 2018 and looks apparently the same, your best shot is to call Kawi and ask them if they have changed anything around the radiador area in the 2018 model compared to the 2016 one I hope this helps you. Best regards
Question:	Is the handle adjustable for a door with a thickness of
Answer:	Yes ,it is fit

Product features

H-Shape " Pull Handle Set,304 Stainless Steel

• Use the longer screw and take off the white rubber sleeve , it can fit door thickness between 1-3/8’’ and 2- 3/16’’ (35~55 mm)
• The diameter of the drill hole on wooden door panel is 5/16’’ (8 mm)

For Glass Door

• Use the shorter screw and put on the white rubber sleeve , it can fit door thickness between 1/4’’ and 1/2’’ (6~12 mm)
• The diameter of the drill hole on glass door panel is 7/16’’ (11 mm)

PACKAGE LIST

DIMENSION DETAIL

HEAVY DUTY