12 best lowes wood fillers

Product description

KwikWood is a hand-mixable epoxy putty, formulated to repair and rebuild wood. After mixing, it cures to the same density as wood and becomes an integral part of the repair. For use on exterior or interior applications, it contains no solvents, will not rot, shrink, crack or pull away. KwikWood has a 15-25 minute work life. After 60 minutes, it can be machined, drilled, tapped, sanded, filed and painted. Stronger than wood, KwikWood dries to a light tan color.

• J-B WELD KWIKWOOD: A hand mixable two part epoxy putty stick that is formulated to repair and rebuild wood. J-B Weld KwikWood is designed for all wood household DIY repairs!
• CURE AND SET TIME: After kneading the two part formula together by hand, KwikWood takes 15-25 minutes to set and cures in 1 hour. J-B Weld KwikWood set and cure color is a light tan.
• PRODUCT FEATURES AND STRENGTH: J-B Weld KwikWood has lap shear strength of 900 PSI. KwikWood will not shrink or rot and can be stained, molded, tapped, drilled, sanded and shaped.
• APPLICATIONS: Window/Door Hinge Repairs, Dry Rot Repairs, Gouges and cracks in furniture, knot hole repairs, gap fillers and more!
• DO IT YOURSELF: Big or small, you can DIY it with J-B Weld. Our heavy duty epoxy and adhesives repair & restore it right the first time. J-B Weld delivers superior performance, quality, and results for the World’s Strongest Bond.

User questions & answers

Question:	Will this product accept wood stain at all
Answer:	Yes, but to control the amount of pigment, I have always sealed the filler 1st, and matched the background color of the wood grain, sealed again, then added the actual wood color on top of the 2nd coat of sealer, then sealed again, painted in grain lines and sealed again. Sealer = lacquer, polyurethane, etc. Usually using a spray finish..
Question:	Can kwikwood be used for rotted wood repair? the window sill has rotted area with high moisture content.the product label mentions dry rot
Answer:	Yes, but dry rot has to be removed and wood needs to be dried out, for a good base for a stable application...also how large of an area is involved needs to be considered. If larger than 3"x3"×2" deep..I would considered a different filler, a bondo type for wood repair, available at most hardware stores, that's more spreadable...for larger holes.
Question:	can this be used to replace the corner of a wooden drawer that is broken off
Answer:	Absolutely. I used it to replace a few corners and patch nail holes
Question:	Once you open the package do you have to use it all at once or can you reseal it and save it for another day
Answer:	I used about 2/3's of a package. Resealed. Used about half of remaining a week later. Resealed. Still seems usable except portion I accidently put in contact. Is binary thick paste, like modeling clay. To activate, must kneed together with fingers quite a bit. Hardens in about 15 minutes. RH

Product features

Epoxy Putty

KwikWood is a hand-mixable epoxy putty, formulated to repair and rebuild wood. After mixing, it cures to the same density as wood and becomes an integral part of the repair. For use on exterior or interior applications, it contains no solvents, will not rot, shrink, crack or pull away. KwikWood has a 15-25 minute work life. After 60 minutes, it can be machined, drilled, tapped, sanded, filed and painted. Stronger than wood, KwikWood dries to a light tan color.

Additional Attributes

• KwikWood will not shrink or rot.
• KwikWood can absorb stain coloring (color should be tested and matched first).

Product description

Minwax 42853000 Stainable Wood Filler, 16-Ounce

From the Manufacturer

Minwax is America's leading brand of wood finishing and wood care products. From staining and protection, to preparation, maintenance, cleaning and repair, Minwax makes and keeps wood beautiful.

• Ideal for repairing cracks, small gouges, nail holes, knot holes and other defects in all types of unfinished indoor and outdoor wood surfaces
• Stainable Wood Filler is specially formulated to accept Minwax penetrating wood stains
• It is designed for use with oil-based and water-based wood stains
• Wood filler
• Stainable and paintable
• Interior and exterior use
• Fast drying
• Sands easily

User questions & answers

Question:	do i have to mix the entire container at once
Answer:	This fill need to be use and let dry for some time before you can stain /paint over it, and when storing it for the next time turn the container up side down so it doesn't dry out over time.
Question:	Why can't I get it out of the tube
Answer:	It will harden with age, just sitting on your shelf. Or it might have come to you from old stock. Once the tube is opened, it will dry out and harden quickly. Probably need to get a new container.
Question:	Can I drill into hardened mini wax wood filler and re-screw a hinge
Answer:	Yes, you can. When filling larger holes: you can speed up the drying process by stuffing part of the gap with a small cutoff piece of wood. Make sure to overfill the area, that way it will sand to a straight, smooth finish
Question:	What is difference or recommended use regarding wood filler and two part epoxy
Answer:	You must make your questions clearer. MinWax Wood Filler when mixed with epoxy is an excellent product.

Product features

Stainable Wood Filler

Minwax Stainable Wood Filler is ideal for repairing cracks, small gouges, nail holes, knot holes and other defects in all types of unfinished indoor and outdoor wood surfaces.

• Stainable Wood Filler is specially formulated to accept Minwax penetrating wood stains.
• It is designed for use with oil-based and water-based wood stains.

Product description

E855 Features: -Wood filler. -Paintable and sandable. -Resists shrinking and cracking. -Easy water clean-up. Name: -Spackling. Dimensions: Overall Height - Top to Bottom: -1.53 Inches. Overall Width - Side to Side: -6.9 Inches. Overall Depth - Front to Back: -2.5 Inches. Overall Product Weight: -0.36 Pounds. For more than 65 years, Elmer's Products, Inc. has been providing creative adhesive solutions that support success and turn ideas into reality.

From the Manufacturer

From filling nail holes in molding strips to filling gaps in hardwood floors, Elmer’s Carpenter’s Wood Filler tubes make the task quick and easy. Carpenter’s Wood Fillers are sandable and paintable - and they come in six convenient colors. For interior use only.

• Paintable and sandable
• Sands easily to a smooth finish
• Resists shrinking and cracking
• Easy water clean-up
• This is an aftermarket of generic part
• Paintable and sandable
• Sands easily to a smooth finish

User questions & answers

Question:	What does "This is an aftermarket of generic part" mean? Is this fake
Answer:	The product I received wasn't "fake". It works just fine. It's wood filler. You can buy the exact same product in the hardware store, same packaging and everything.
Question:	Would this protect against carpenter bees
Answer:	This is intended mostly for filling small holes, so if it is the wood they are after, you would not be covering enough to protect it from them.
Question:	Cover over nail head metal
Answer:	Yes this will cover that for nail heads as well
Question:	Could I use this to fill in a screw hole that is too big and rescrew in that area
Answer:	Yes, it dries to a hard consistency. I believe that would work.You can also put some pieces of toothpick in with the screw, as you drill it in, to hold it in place.

Product features

Elmer's Carpenter's Wood Filler

From filling nail holes in molding strips to filling gouges in hardwood floors, Elmer’s Carpenter’s Wood Filler tubes make the task quick and easy.

• Dry Time: 12-24 Hours
• Indoor
• Paintable

About us

For more than 65 years, Elmer's Products, Inc. has been providing creative adhesive solutions that support success and turn ideas into reality.

By continuing to develop innovative new products, Elmer's has become the trusted brand when it comes to fueling creativity and providing outstanding product performance in the classroom, at home, in the workshop and at the craft table. At Elmer's, we inspire people to create, build and learn for life.

Product description

E868 Features: -Paintable and sandable wood filler. -Resists shrinking and cracking. -Easy water clean-up. -Solvent free. Name: -Spackling. Dimensions: Overall Height - Top to Bottom: -1.53 Inches. Overall Width - Side to Side: -6.9 Inches. Overall Depth - Front to Back: -2.5 Inches. Overall Product Weight: -0.33 Pounds. For more than 65 years, Elmer's Products, Inc. has been providing creative adhesive solutions that support success and turn ideas into reality.

From the Manufacturer

From filling nail holes in molding strips to filling gaps in hardwood floors, Elmer’s Carpenter’s Wood Filler tubes make the task quick and easy. Carpenter’s Wood Fillers are sandable and paintable - and they come in six convenient colors. For interior use only.

• Paintable and sandable
• Sands easily to a smooth finish
• Resists shrinking and cracking
• Easy water clean-up
• This is an aftermarket of generic part
• Paintable and sandable
• Sands easily to a smooth finish

User questions & answers

Question:	Could this be used to fill a crack in a table. It's the whole length of the table and wide enough for water to spill to the ground through it
Answer:	I would use a good wood putty that is not porous in place of this.
Question:	would this fix nail holes that are striped where hidges hold door? does it dry hard
Answer:	Yes, if you do it right. Any good wood glue or wood filler can be put in a stripped wood screw hole, and the screw pushed into the wet filler, but be careful -- once the filler sets up, you won't be able to tighten or remove the screw. Add a toothpick or 2 if the hole is really loose, just so the screw will stay in place while drying.
Question:	Can this be used on top of chalk paint
Answer:	This product is used to repair interior wood holes and gouges. Loose paint and wood chunks should be removed before application.
Question:	Can it be used to fill cracks or holes in the fresh wood stump
Answer:	This wood filler is designed for filling holes and gouges in wood. Note that it is non-structural, so it should not be subject to critical stress.

Product features

Elmer's Carpenter's Wood Filler

From filling nail holes in molding strips to filling gouges in hardwood floors, Elmer’s Carpenter’s Wood Filler tubes make the task quick and easy.

• Dry Time: 12-24 Hours
• Indoor
• Paintable

About us

For more than 65 years, Elmer's Products, Inc. has been providing creative adhesive solutions that support success and turn ideas into reality.

By continuing to develop innovative new products, Elmer's has become the trusted brand when it comes to fueling creativity and providing outstanding product performance in the classroom, at home, in the workshop and at the craft table. At Elmer's, we inspire people to create, build and learn for life.

Product description

FAMOWOOD Water-Based Wood Filler - Environmentally safe and sound Famowood offers a water-based wood filler which meets the growing demands for a product that has little or no impact on the environment, yet maintains the qualities of our time tested solvent based products. Can be stained, sawed, drilled, sanded, planed, painted, and nailed like real wood. Fills holes and cracks quickly, dries in 15 minutes with no noticeable shrinkage, cracking, or crumbling. Indoor or outdoor use. Nontoxic with no solvent fumes. Soap and water clean up. - Color: Natural, Size: 24 Oz., Pkg Qty: 1, Package Type: Can WARNING: This product can expose you to chemicals including wood dust particles and respirable crystalline silica which are known to the State of California to cause cancer. For more information go to www.p65warnings.ca.gov. -

• Dries in 15 minutes
• Won't crack or shrink, solvent free – low odor and easy water cleanup
• Can be sanded, drilled or planed
• Stainable and paintable
• Interior/exterior use
• Solvent free, professional quality wood filler
• Takes stains and paints like real wood

User questions & answers

Question:	Would this product help minimize the grain on oak cabinets before priming and painting
Answer:	Yes. But why paint over oak cabinets and hide the grain?
Question:	Is this putty easily sandable? Not harder than the wood itself (maple, in my situation
Answer:	Yes it is easy to sand. I have used a lot of wood-fillers over the years, but Famowood is by far the best.
Question:	I need to fill deep gouges in particleboard flooring under carpet. Is something better or cheaper when color and stainability aren't issues
Answer:	Its a great product. I have used both the Famowood and Durhams Rock Hard water putty to fill in blemishes, cracks and large knot holes in plywood subflooring. Both worked very well with negligible shrinkage. A little sanding and a second application was required on large repair work. Both should work equally well on particle board. So far I have had no blemishes show through the finished VTC Vinyl flooring. As for pricing I would check local pricing and compare the cost with Amazon. Probably shipping charges will dictate your final choice.Regards,W. Les Clarke
Question:	Am I the only one that is struggling to open the vapor lock seal lid? Certainly I am doing something wrong
Answer:	Yes, had a hard time opening the lid myself. I tried just about everything I had on my workbench to try and pry open lid. I ended up using pliers to pry open the lid but it didn't look the same when I was done with it. Good product poor lid design

Product description

Elmer's E842L Carpenter's Interior Wood Filler; 32 Ounce; Ideal for Repairing Holes, Dents, Scratches, Gouges and Defects On Any Wood, Wallboard, Molding or Painted Surface; Pack of 1

Key Features

• Ideal for Repairing Holes, Dents, Scratches, Gouges and Defects On Any Wood, Wallboard, Molding or Painted Surface
• 12-24 Hours Dry Time
• Dries Fast, Dries Hard
• Paintable + Sandable
• Resists Shrinking + Cracking
• Easy Water Cleanup
• Solvent Free

From the Manufacturer

Elmer's E842L Carpenter's Interior Wood Filler; 32 Ounce; Ideal for Repairing Holes, Dents, Scratches, Gouges and Defects On Any Wood, Wallboard, Molding or Painted Surface; Pack of 1

Key Features

• Ideal for Repairing Holes, Dents, Scratches, Gouges and Defects On Any Wood, Wallboard, Molding or Painted Surface
• 12-24 Hours Dry Time
• Dries Fast, Dries Hard
• Paintable + Sandable
• Resists Shrinking + Cracking
• Easy Water Cleanup
• Solvent Free

• Ideal for Repairing Holes, Dents, Scratches, Gouges and Defects On Any Wood, Wallboard, Molding or Painted Surface
• 12-24 Hours Dry Time; Dries Fast, Dries Hard
• Paintable + Sandable; Resists Shrinking + Cracking
• Easy Water Cleanup; Solvent Free

User questions & answers

Question:	will it fill a door knob hole
Answer:	I would not use this alone to fill a large hole like a hole for a door knob
Question:	Has anyone tried staining this product yet....or only used with paint? do i need to buy the specific "stainable filler"? thank you
Answer:	I used this stuff with paint when I was making props for a costume. It takes to paint very well, you may need a couple of coats, but it will work.
Question:	Has anyone tried to "stain" this wood filler, does it stain well
Answer:	Yes it will take stain but I would stain just the filler using a small paint brush to make it match the unstained wood around it, let that dry, then stain the whole piece as normal and you’ll have a better chance of it all blending better. This should not be used for large sections but rather to blend away small ding, holes, gouges, etc.
Question:	Yes, it says for interior...but any success/experience using it for exterior purposes? i need to fix cracked wood on patio door frame. tia
Answer:	I also used this to repair a cracked Exterior door frame. Apply, let it dry, lightly sand and my frame only showed a slight blemish after touchup painting. Still holding strong. Hope this helps...

Product description

Plastic Wood, 6 OZ, White, Latex Based Wood Filler, For Cracks, Gouges, Holes and Other Surface Defects On Furniture, Woodwork, Molding, Cabinets, Paneling, Plywood, Windows, Doors and Even Painted Surfaces, Easy To Use, Low In Odor, and Cleans Up With Water, Looks and Acts Like Real Wood.

• A high-performance, solvent-based wood Filler that hardens to give a repair that is 3X stronger than the wood itself (compared to White Pine)
• This professional-grade, heavy duty wood Filler contains real wood fibers so it looks and acts like real wood
• It can be sanded, cut, drilled, screwed, planed, stained, varnished, painted, or Lacquered
• It provides strong nail and screw anchoring without splitting
• DAP plastic wood professional wood Filler dries fast and hard, and is shrink and crack resistant

User questions & answers

Question:	Which sandpaper grit should I use to smooth it out
Answer:	I used this to fill in holes caused by woodpeckers. I believe last summer I used a medium fine grit. Doesn't take much to smooth it out.
Question:	Why is mine so watery
Answer:	Did u "work" the tube (with lid on work up & down because sometimes it separates a little from sitting). If that doesn't work then return it for new 1. Should be kind of a thick toothpaste consistency.
Question:	Can this be used under acrylic paints
Answer:	I use latex paint over so why not acrylic too
Question:	I am looking to fix the door hinges of a ikea pax wardrobe with a stripped the screw hole. doors are heavy and can i apply this and screw it after
Answer:	Use glue and a wooden matchstick. Put wood glue in the stripped hole. Insert the matchstick and let dry. Cut the matchstick flush with the surface and drill a new hole. Larger holes use multiple matchsticks or slivers of wood

Product description

Elmer's Carpenter's Wood Filler for interior use only is ideal for repairing holes, dents, scratches, gouges and defects on any wood, wallboard, molding or painted surface.

• Elmer's #E849D8 PT Ind/Out Wood Filler
• ELMER'S PRODUCT INC
• Craft
• This is an aftermarket of generic part

User questions & answers

Question:	Do this product work with laminate kitchen cabinets?! I want to fill in the 70s door designs and make it flat; I’ll than paint over it
Answer:	This product is used to repair holes, dents, scratches, and defects on wood, wallboard, molding or painted surface.
Question:	What color is it
Answer:	This wood filler is color beige.
Question:	What color does it dry
Answer:	Same color as when it's wet, tan or light wood color
Question:	Is this shapable like a putty or is this more of a liquid
Answer:	It is shapable like a putty. It doesn't dry so quick so have to work real fast with it. It doesn't take a long time either though once you've applied it for it to dry enough to sand it although I try to leave it drying overnight. It's one of the best wood fillers on the market in my opinion.

Product features

Carpenter's Wood Filler

Elmer’s makes it easy to take on any project or repair at home or in the workshop.

Ideal for repairing holes, dents, scratches,

and defects on any wood, wallboard,

molding, or painted surface

Product description

Bondo Wood Filler is a permanent, fully paintable repair material for a broad range of projects inside and outside the home. Ideal for almost any wood surface, the two-part wood filler forms a permanent bond and will not shrink. It cures fast – in as little as 15 minutes it can be easily sanded by hand or power tools. Bondo Wood Filler is suitable for staining or painting in only 25 minutes.

From the Manufacturer

Bondo Home Solutions Wood Filler rebuilds, restores and replaces rotted or damaged sections of wood on doors, windows, fences, furniture, shutters and more. This wood filler is the best choice for repairing any wooden item in or around your home. Once dried, it can be sanded, shaped, planed, drilled, routed or sawed just like wood. This durable product is formulated to accept stain and paint more naturally than most wood filler products. For rotted wood problems, use Bondo Home Solutions Rotted Wood Stabilizer before applying the wood filler.

• Make quick, durable repairs to damaged and rotted wood
• Cures fast; sandable in 15 minutes for fast same-day repairs
• Stainable and Paintable in 25 minutes.
• Bondo formula accepts paint and stain beautifully
• Durable 2-part solution provides permanent and non-shrink repairs.
• Water resistant formula is designed for interior and exterior use.
• Ideal for repairing doors, windows, fences, furniture, wood trim and more.

User questions & answers

Question:	Did you find it hard to sand/shape? I'll be filling cracks and holes in deck wood, and want to "feather" it in flush w/wood
Answer:	I have 20+ years in contract office furniture, specifically in Operations (8 years in Service) & Bondo is great for filling dents, divots, etc. I recommend using a non-flexible flat metal/plastic surface for your pallet. Work fast, it hardens quickly. Start with 120 grit & reduce to 220. We sprayed a light coat of primer to check our feathering.
Question:	Can this product be molded so as to create a 1" vertical edge as it's being applied or does it need a temporary barrier to keep it in place
Answer:	My experience working with the Bondo Wood Filler leads me to believe it requires a temporary barrier to form a 1" vertical edge. While the mixed compound is not "soupy," it is not so firm as to avoid slumping unless you were to build up the vertical edge in small (say 1/4") layers. After a few minutes the mixture does become firm enough to stand on it's own but at that point is unworkable. I hope this answer is clear and correctly addresses your question.
Question:	What ratio do you use for wood filler to hardener? I find the directions confusing
Answer:	I don't think you have to be too precise with the ratio. A little hardener goes a long way and this stuff sets up immediately. I used a hardener line about the length of a paper clip on a 4-inch dollop of the bondo filler and it worked fine.
Question:	Will it take a water-based stain
Answer:	Not an acceptable substrate for stain, however after priming may be painted over with laytex//water, acrylic/enamel, lacquer or oil based paints.

Product features

Bondo 20082, Quart Home Solutions Wood Filler

Bondo Wood Filler lets you rebuild, restore and replace rotted or damaged sections of wood on doors, windows, fences, furniture, shutters and more.

• Two-part filler bonds to wood surfaces for permanent, non-shrink repairs
• Cures fast; sandable in 15 minutes for fast same-day repairs
• Turns medium brown when mixed, helping blend with wood surfaces for consistent appearance
• Fully paintable and stainable

Product description

E861 Features: -Paintable and sandable wood filler.-Resists shrinking and cracking.-Easy water clean-up.-Solvent free.-For interior and exterior use.-Golden Oak.-3.25 fl oz. Color/Finish: -Sands easily to a smooth finish. For more than 65 years, Elmer's Products, Inc. has been providing creative adhesive solutions that support success and turn ideas into reality.

From the Manufacturer

From filling nail holes in molding strips to filling gaps in hardwood floors, Elmer’s Carpenter’s Wood Filler tubes make the task quick and easy. Carpenter’s Wood Fillers are sandable and paintable - and they come in six convenient colors. For interior use only.

• Paintable and sandable
• Sands easily to a smooth finish
• Resists shrinking and cracking
• Easy water clean-up
• This is an aftermarket of generic part
• Paintable and sandable
• Resists shrinking and cracking

User questions & answers

Question:	Has anyone used this on natural bamboo trim
Answer:	I never have but it may work if you can find a color match.
Question:	How many tubes are in this
Answer:	What you see is one!
Question:	Cancelled order when i saw it was shipping amzl-us. i don't want amazon's shipping service. how do i reorder so it ships usps, ups, or fedex
Answer:	If you go to any other website, you'll pay more even if they say it's free shipping. I join Prime after all these years and I have no regrets. I'm saving in many things.
Question:	Which wood filler do i use on plain wood from a lumber yard if i am painting oil base leather brown paint
Answer:	The best type of wood filler to use would be the ProBond Wood filler since it is stainable.

Product features

Elmer's Carpenter's Wood Filler

From filling nail holes in molding strips to filling gouges in hardwood floors, Elmer’s Carpenter’s Wood Filler tubes make the task quick and easy.

• Dry Time: 12-24 Hours
• Indoor
• Paintable

About us

For more than 65 years, Elmer's Products, Inc. has been providing creative adhesive solutions that support success and turn ideas into reality.

By continuing to develop innovative new products, Elmer's has become the trusted brand when it comes to fueling creativity and providing outstanding product performance in the classroom, at home, in the workshop and at the craft table. At Elmer's, we inspire people to create, build and learn for life.

Product description

ELMER'S PRODUCT P9892 Probond Woodfiller

• This Product Is A Qt Probond Woodfiller
• Purpose Of Use For Glue, Wood-Fill
• Manufactured In China
• Brand Name: Elmer'S

User questions & answers

Question:	Do i have to mix this with a hardener
Answer:	No, mine came already hardened because the containers were broken open when they arrived and the contents had already hardened. Shipper gave me a refund.
Question:	What size container is this
Answer:	well it comes in at least 2 sizes that I know this particular one is 32 oz (like it says on the cover) good stuff.
Question:	what color is this
Answer:	When dry it was a tan color if I remember correctly. It worked great in repairing some damaged ornamental trim that had some decay spots. Cleaned wood of loose debris used Minwax wood hardener and when that had dried I filled and shaped with the Probond filler. Let it dry and painted with a exterior paint primer in one. It has taken on salt beach air , crazy hot humid summers and several blizzards and still holding up great. Saved me 100's in having to have new trim made. Very happy with Probound.
Question:	Can this be used to fill a 2” deep rot hole in a window sill
Answer:	The better product is the two part severe wood damage epoxy by Elmer’s. It is very stiff and hard to mix but that is two deep for the Elmer’s wood filler. Make sure to get all the wet rotted & loose wood out with a drill and probably a wood chisel. Mix the Elmer’s epoxy and cram as much in the hole as u can. It dries in 24 hrs then use a chisel and sand paper to remove the protruding parts of filler. Then go back and use the Elmer’s wood filler u asked about to smoothe the surface (make sure it’s the interior/exterior) smooth with sand paper and paint. “GOOD AS NEW”. I’ve used this several times on different windows. Amazon carries the wood epoxy too.

Product description

Exterior Latex Wood Filler, Size 1 pt. , Container Type Pail, Color Natural, Flash Point Not Specified, Temp. Range 40 Degrees F, Dry Time Not Specified, Dry Time Recoat Not Specified, Dry Time Tack Free Not Specified, Traffic Hours Not Specified, Application Time Not Specified, Setting Time Not Specified, Functional Cure Not Specified, Adheres To All Woods, Application Fill Cracks, Dents, Scratches, Nail Holes and Chips In Wood Surfaces, Characteristics Easy Water Clean-up Formula, Low Odor '

• 16 ounce Package
• Provides a repair that is 3X stronger than the wood itself
• Fast-acting formula
• Great for structural repairs

User questions & answers

Question:	Do I need to completely remove excess around hole before staining? Or as long as it’s smooth with the wood it won’t be noticeable
Answer:	Doesn’t have to be gone, but level with surrounding material so there is no lump
Question:	Can you put screws into it
Answer:	Yes
Question:	Can you apply this in cold temperatures? (say, 35-40 degrees
Answer:	I don’t know if you can or not but I can’t recommend this product, it’s very light and doesn’t adhere. I used it on wood trim to fill corners and holes and was dry and hard to work with
Question:	will storing after opening in frig help keep it moist
Answer:	I think it helps. I place the closest container in a sealed baggie then place inside the fridge