10 best protek multimeters

• ACCURATELY MEASURES: AC/DC Voltage, DC Current (Not AC Current), Resistance, Continuity, Diodes and more.
• TROUBLESHOOTS SAFELY: Automotive and household electrical problems safely and accurately; Overload protection on all ranges
• EASE OF USE: Data hold and large digital display with backlit LCD for visibility in dimly light areas; Sampling speed: 2x per second
• 1 Year Warranty. Built-in kickstand for hands-free use. Protective rubber corner guards for drop protection
• NOTE: This meter can not test AC Current; Ensure your multimeter is set to the correct setting before testing

User questions & answers

Question:	which setting is for volts, and which is for ac
Answer:	The V with the two lines is DC volts and the line with the squiggly line is AC volts.
Question:	is the continuity test audible
Answer:	Good question. and I can't find an answer it doesn't say but in the picture when it's showing someone testing continuity it shows that it's beeping what it doesn't say that it does beat and we've got two people on here that say it does not and two people that say that it does so good luck I'm looking for one that is audible myself why all multimeters don't have an audible noise when you have continuity I will never know either that or you can have one that has a paper thin needle that jumps and you can't see it and you have to take your eyes off of what you're working on to see if you have continuity and when you move your head you lose contact and it's such a pain in the ass
Question:	Is this unit protected by a fuse? If so, is it replaceable? My last meter was fused but it was soldered. I couldn't easily replace it
Answer:	I had to replace the ammeter fuse (because I forgot to switch the hot (red) test lead from the left side to the middle, before testing my car's battery voltage). That fuse is 10A 600V. I looked around for those & couldn't find them, but found 10A 250V and these worked OK. They're 20 x 5 mm ( .2 x .79") ceramic fast-blow. https://www.amazon.com/gp/product/B07JFDTTMJ/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1
Question:	Can this handle being plugged into a wall socket? Also, can someone give a walkthrough of how to safely test a socket
Answer:	plug the red lead into the meter socket marked COM and the black into the center meter socket. Set the dial to V~ (for AC volts) on the 200 scale (for household current) insert one probe lead into each of the wall socket's vertical slots and move them around a bit inside the outlet slots to make sure you're getting a good connection, if in doubt plug a lamp or something into the socket. If you suspect the outlet socket itself has failed carefully remove the wall plate in order to access the actual wires connected to the outlet to be sure it's either a dead circuit or the outlet itself has failed.

Product features

AstroAI Digital Multimeter

The AstroAI AM33D Multimeter is designed to safely and accurately troubleshoot a variety of automotive and household electrical problems. It's easy and safe to operate and features many different functions for measuring current, voltage, and resistance, as well as continuity, transistor, and diode testing, which is both for automotive and household uses.

Troubleshoot Electrical Problems

AstroAI multimeter is professionally designed to troubleshoot electrical problems or just for electronics training.

Continuity Test

Connect the test leads to two points on the circuit being tested.

Intelligent Anti-burn and Dual Fuse

Double Fuse Protection, more secure and reliable; This multimeter is designed with safety in mind. Overload protection on all ranges.

Backlit LCD

Large digital display with backlit LCD for visibility in dimly light areas.

Data Hold

When taking measurements and recording results, it is often easier to use the data hold function to freeze the data being displayed on the digital display.

Low Battery Indication

You can quickly know to replace the battery and continue working. so you never accidentally run out of juice.

Open Support Stand and Protective Rubber

Built-in kickstand for hand free use. Protective rubber corner guards for drop protection.

Product description

Crenova 890Z digital multimeter.

• Versatile to measure AC/DC current, AC/DC voltage, resistance, frequency, capacitance, continuity, diode, transistor (hFE), and temperature
• Comes equipped with non-contact voltage (NCV) detector for quick and precise sensing AC electric field without touching any wires
• Hook hole, support stand, and test lead holder design add more convenience, letting you fully concentrate on hassle electrical upgrades, repairs, and maintenance tasks
• Bright torch and screen backlight ensure reliable performance in lower light areas, rubber holster effectively protects the multimeter from strong impact force
• Includes all must-have accessories: K-type thermocouple , probe test leads (1 pair), alligator clip test leads (1 pair), 1.5V LR6 AA batteries , carrying box , and manual

• WIDE RANGE of tests for Voltage, Current, Resistance, Continuity, Capacitance, Frequency; Tests Diodes Transistors, Temperature.
• PROFESSIONAL LEVEL features include Auto-Ranging capability, and True RMS for measuring both AC Current and Voltage
• EASE OF USE: Convenient features like Data Hold, Large LCD Backlit Screen, Auto Shut-off and Hanging Magnet, and Kickstand make taking and recording measurements easier than ever before
• IDEAL FOR COMMERCIAL settings where it can handle the demands of a long workday, from the durable exterior to the wide range of heavy-duty capabilities
• Built-in F400mA/600V and F10A/600V explosion-proof ceramic fuse tubes; Double Protection, more secure and reliable; The fuses can protect the multimeter effectively; Overload protection on all ranges. 3 Year Warranty provided by AstroAI. Note: Please take off the cap before using the test leads.

Product features

AstroAI 6000 Counts True RMS Digital Multimeter

The AstroAI True RMS Multimeter is designed to be safely and accurately used by professionals in a commercial setting or weekend DIYer's that need a little more power utility from their standard digital multimeter. It's easy and safe to operate with advanced features built for measuring seemingly everything. Run tests on diodes and transistors while being able to measure voltage, current, resistance, continuity, capacitance, and frequency, all on one device.

Troubleshoot Electrical Problems

AstroAI multimeter is professionally designed to troubleshoot electrical problems or just for electronics training.

Continuity Test

Connect the test leads to two points on the circuit being tested.

Intelligent Anti-burn and Double Protection

Built-in F400mA/600V and F10A/600V explosion-proof ceramic fuse tubes; Double Protection, more secure and reliable; The fuses can protect the multimeter effectively; Overload protection on all ranges.

Backlit LCD and Data Hold

Large digital display with backlit LCD for visibility in dimly light areas; It is often easier to use the data hold function to freeze the data being displayed on the digital display.

Multi-Function Socket

Use the multi-function socket to measure both Capacitors and Transistors.

Hanging Magnet and Kickstand

Hanging magnet and kickstand make taking and recording measurements easier than ever before.

Temperature Test

Carefully touch the end of the thermocouple to the object being measured; Wait for the temperature reading to settle, then record the result from the LCD display.

User questions & answers

Question:	does it come with the default test leads
Answer:	Yes
Question:	Would this work with a 48v 18 amp hour battery
Answer:	If your question is can it measure the DC voltage of a 48 volt battery, the answer is yes.
Question:	How does the Max function work? For instance, does it show the maximum value of a measurement taken over some specific period (how long) of time
Answer:	Push the hold bottom and keep the settings as long as you wish. Push the hold button again to erase the reading.
Question:	How fast does the display update
Answer:	it update the data pretty quick for me.very sensitive multimeter.

Product features

Diode Test

Accurate and fast diode test

AC Voltage Test

Accurately measures AC voltage up to 600V

DC Voltage Test

Accurately measures DC voltage, suitable for auto repair

Double Fuse

Double fuse overload protection but please do not exceed 600V when measuring

Low Battery Indication

An indication will be given when the battery is low to replace the battery.

Auto power off

Auto power-off after 15 minutes of inactivity to save power

Max Funtion

Press the "MAX" button to get the max data

Silicone Protective Case

It can effectively prevent the meter from falling damage with a silicone protective case

• 【Digital multimeter 6000 true rms】auto/manual range, large backlit lcd with ncv ac/dc voltage current resistance capacitance frequency temperature duty ratio diode transistor continuity on-off measurement.
• 【Ce rated safety lcd mulimeter】low battery voltage indication, 600V cat iv, 1000V cat iii, double fuse. Data hold, overload protection on all ranges, safely accurately troubleshoot a variety of automotive and household electrical.
• 【Protective case & stand & slot】soft non-slip orange rubber sleeve protection against knocks/bumps; built-in stand for hand free check screen when meter placed at 45°; test probes slot to place your probes.
• 【User friendly details】automatic polarity display, unit symbol display; screw-on back cover for easy removal; protective cover on probe for multi-use; flashlight, automatic turn off; hanging holes to hang meter in a right place.
• 【Multimeter set】test leads (1 pair) & 10A small banana plug to alligator clip & 1 k-type temperature probe & 2 1.5V aaa battery, widely served in home school lab factory for professional electricians technicians home users.

User questions & answers

Question:	The description says it measures dc current. however the product pic only shows measurements for ac current
Answer:	Yes, but you probably don't want to sand them at all! Diecast aluminum will show ALL of your sanding marks, even after paint. Just clean them very well, thin layer of primer, then spray over the original paint.
Question:	Is this meter ul listed? if someone could please look on the back of their tester and tell me if you see a "ul" mark stamped on it. thanks
Answer:	Yes, in the description. Usually Shimano includes standard cleats.
Question:	How do you get the inside battery compartment open
Answer:	yes, one pair.
Question:	Does this multimeter read MFD
Answer:	yes, shimano SH-51 includes

Product description

The INNOVA 3320 is a Auto-Ranging Multimeter designed to safely and accurately troubleshoot a variety of automotive and household electrical problems. It's auto-ranging scales eliminate the need to dial in the correct range when making electronic measurements. The 10 MegOhm input is safe for automotive and household uses (i.e., household outlets, fuses, wiring, general-purpose batteries, vehicle battery and charging system, automotive circuits and more). The color-coded LEDs allow you to quickly check household batteries (green = good, yellow = weak and red = replace). Includes attachable test leads, holders and stand for hands free use and features protective rubber corner guards for drop protection. The INNOVA 3320 has a single setting resistance function for AC and DC voltage.

• UL certified product designed to safely and accurately troubleshoot a variety of automotive and household electrical problems
• Auto-ranging scales eliminate the need to dial in the correct range when making electronic measurements
• Features large digital display and color coded LED's for battery quick check
• Single-setting resistance function for AC and DC voltage
• Protective rubber corner guards for drop protection

User questions & answers

Question:	I own an Innova 3300 that over estimates voltages, 9V PS reads 10.5, 12V reads 13.8, 3.7V battery reads 6.24 what can I be doing bad
Answer:	I would advise against it. This is only a CAT 2 rated meter. That means the internal safety features are not sufficient to handle the higher potential voltage and energy that could come about at a meter panel. http://www.ni.com/white-paper/5019/enYou really want a CAT 3 meter if you want to measure any live breaker panels.If you are going to test for bad circuit breakers that are disconnected from the live wiring then you could use this meter to check for continuity and the like. Do not use this meter on anything more powerful than a wall outlet. CAT 3 meters are available for not much more money.
Question:	What's the lowest ohm reading it is capable of
Answer:	Yes, the Innova is great for finding parasitic leaks in boats and cars. Turn everything off..... EVERYTHING and then disconnect the negative battery cable. Insert the meter in series with the neg bat terminal and the end of the cable. If there is a current leak it will show on the meter when it is set on the AMPS function. Becareful that you don't turn anything on when the meter is connected because the AMP mode is not fused. If a current reading shows on the meter start pulling fuses and disconnecting devices until the reading drops to zero therefore isolating the problem
Question:	Can I use this meter to test for bad circuit breakers at electrical panel or electrical outlets at home? I'm newbie; want learn how to use. Thank u
Answer:	I'm assuming you have tried moving the main test mode selection dial to some position other than 'off'. Do you have another 9V battery on hand you could use instead? It's possible the battery you received with the tester is bad. If another battery does not solve the issue, then it's possible you received a bad unit.
Question:	I am searching for current leak in a boat (12v battery). Will this dial down to low enough amps to diagnose? Thanks
Answer:	It will measure down to 0.01mV in both - AC and DC modes, thou manual says - 0.1mV.

Product features

Innova 3300

The Innova 3300 is an entry-level, hands-free Digital Multimeter designed to safely and accurately troubleshoot a variety of automotive and household electrical problems.

Innova 3320

The Innova 3320's Auto-Ranging feature eliminates the need to dial in a specific voltage range when performing home and auto troubleshooting. The Color LEDs allows for quick battery condition checks, while rugged rubber guards protect it against accidental drops.

Innova 3340

The Innova 3340 Auto-Ranging Multimeter features a temperature probe to retrieve and display temperatures in both Celsius and Fahrenheit, vehicle RPM (including coil on plug vehicles) readings with the included inductive pickup, automatic zero adjustments and reverse polarity protection. The 3340 is great for testing alternator diodes, duty cycle, solenoids, breaker points, wiring, switches, and more.

Product description

Fluke 101 Basic Digital Multimeter

User questions & answers

Question:	does this have 10 megaohm impedence
Answer:	I am pretty sure the question refers to the load impedance of the meter and not its resistance range. BTW, the manual for this meter is readily available on-line, where you will learn that the input impedance is >10M for AC/DC measurements and >1M for AC mV measurements.
Question:	The Fluke website states it measures capacitance and it has the symbol. Why are people answering no that it can't
Answer:	It can measure capacitance. Of course I cannot answer why others say it can’t. Must naturally be set correctly. The manual has a full description.
Question:	Does this meter check microfairings
Answer:	This meter does have a capacitance test.
Question:	Can you measure ghost voltage with it
Answer:	If you are asking about a parasitic draw I would not since it doesn't have a amp setting I have not personally tried with mine but I know even with my fluke 87 it is still tricky so you don't blow the internal fuses. Hope that helps

• ♞ [High Performance] - Reach 9999 counts.Measure the AC/DC voltage, AC/DC current,frequency,resistance,capacitance,duty cycle, diodes, live wire test,fuse disconnected , circuit continuity etc. NCV & VFC function,data hold & backlight,auto-off(15 minutes), battery voltage measurement. We also have functions that other digital multimeters do not have including temperature(-4℉~1832℉) & humidity, data hold, auto-off.
• ♞ [Enjoy the Fun of Measurement]-Our voltage testers provides two measurement modes, automatic and manual. If you have higher requirements for handling, you can choose manual mode. If you want to easily obtain measurement results with the digital multimeters, you can choose automatic mode. No matter which mode you choose, it will not affect your rapid measurement results. Ten times / second measurement speed allows you to get measurement results in almost real time.
• ♞[Wide Application]-Test fundamental electric issues of automotive or household appliances, suitable for electrical circuit, home users, enthusiasts, professional electricians and technicians.Can used for household sockets, distribution box,fuses, cables, universal batteries, automotive batteries and charging systems, automotive circuits and more.
• ♞[ 3 Security Protection]- Compact,accurate and reliable.Overload protection（<250V）, fuse blow alarm, wrong insert alarm.Provide you with the highest level of security protection. And protect your meter from being easily burned out. Compared with other multimeters, it has a longer usage time,more efficient and safe.
• ♞[ Customer Care]-CAT IV 600V CAT III 1000V.Combined with Amazon's excellent delivery service, we provide 36-Month after sale service, lifetime technical support. Please feel free to contact us if you have any concerns.

Product features

Suitable for beginner,DIY enthusiasts, and professional engineers!

Advanced Functions

Automatic / Manual range,9999 counts,Ture RMS,NCV measurement, VFC inverter measurement function,diodes,continuity,on-off test,low battery indication,live line,while still measuring AC/DC voltage, AC/DC current, capacitance, frequency, resistance, continuity,temperature & humidity measurement etc.

Clear Backlight LED Screen

The lighted up numbers & letters with black background make it very easy to read.Show 3 test results on the screen, voltage,frequency and analog bar.

Keep High Safety

Overload protection,Fuse disconnection,Wrong insert alarm prompt circuit provide the HIGH SECURITY during your working.

User-friendly Design

The flashlight and backlight are separately designed,Automatic shut-down,Data hold, Over-range indication,Low battery indication, make your work easier and faster.

Temperature/Humidity Measurement

It is convenient for you to measure the temperature and humidity of the environment.

Good Quality

The flashlight and backlight are separately designed,Automatic shut-down,Data hold, Over-range indication,Low battery indication, make your work easier and faster.

Everything is Ready for You

The surface of the digital multimeter is covered with a thick soft rubber protective case to prevent accidental electric shock.With general test leads and 2 batteries, open and use.

Wrong Insert Alarm

In the wrong gear position (the gear position and the test line access port do not match), the screen of the DM100 will display “LEAD” and beep. For example, if you want to measure the voltage, turn the rotary switch to the voltage level, but if your test line is plugged into the 10A or uA inlet (measuring current), an “LEAD” will be displayed.

Fuse Disconnected Alarm

If the input end fuse is disconnected, the screen will display "FUSE" while the buzzer alarm is triggered.

Professional Capacitance Measurement

The capacitance is measured quickly (1000uF JUST about 1 second), and the effect of ESR on the quality of the capacitor can be identified, the measured value is closer to the actual value of the capacitor.

LED Lights with High Brightness

It's brighter than the LED lights of ordinary multimeters and can work at night too.

Buzzer and Continuity

The built-inbuzzer sounds continuously and the green indicator light is on when theresistance is lessthan15Ω. The buzzel will give an alarm intermittently, andle green indicator light flashes when the measured resistance is between15Ω and 30Ω.

Vehicle Battery Measurement

Prepare for your car, it is easy to carry and can spot problems with the car at any time.

• Continuity Test and Voltage Alert: Use the PTC ceramics protection circuit for Resistance and frequency measurement and Shielding Interference and Diode and Continuity Test can be 20000 µF
• Non Contact Voltage Alert: When the detection of voltage is greater than 700V(RMS), keep close to the conductor, the instrument sensor will light and buzz.
• With 10 Auto-Ranging: Accurately measures AC/DC voltage and current, frequency, resistance, diode and continuity NCV test, It's a good 10 Function Digital Multimeter
• Designed with EBTN screen, when testing indoor or low light environments is very advantageous, its screen is clearer and the test speed is very fast.
• Package Content: Digital Multi Meter 9V Battery, English User's Manual, 2 x Test Leads, 4 Alligator Clips

• 【2000 Counts 8233D PRO Pocket Digital Multimeter】 Wide Application: It Can Accurately Measure AC/DC Current Voltage, Resistance, Capacitance (4-2000uF), Frequency (1kHz-200kHz), Continuity
• 【Included 9 Volt Battery】The Compartment Lid at the Back is Secured by One Cross Head Screw, Not Difficult to Remove at All; Also, Included Pair Test leads and Pair Banana Plug to Alligator Clip Cable
• 【CE Rated Digital Mulimeter with Over Load Protection】 Designed to Safely and Accurately Troubleshoot a Variety of Automotive and Household Electrical
• 【Large Backlit LCD Display】 Auto Polarity Display, Easy to Read Large Backlit LCD Display, Back-light Makes a Real Difference in Low Light Areas
• 【Nice Protective Orange Shell with Stand Built】 The Case with Our Multimeter is Some Kind of Non Slip, Slightly Soft Plastic that Will Help with Drop Protection, The Stand Places the Device at a 45 Degree Angle and Makes the Screen Easy to See Hands Free

Product features

Overview:

The 8233D PRO multimeter using the word high 15mm LCD display with backlight, even in low light places can clearly read the display value. It's a high performance, high reliability, compact handheld 3 1/2 digit digital multimeter auto range. This Meter is designed to meet IEC 61010-1 & CAT II 600V over voltage category and double insulation. The meter with rubber case, can against the shock of a drop.

Package List:

1x NT8233D pro multimeter

1x Banana Plug to Alligator Clip Cable

1x Test Probe Lead

1 x 9V 6F22 Battery

1x User Manual

2000 Counts Pocket Digital Multimeter

Measurement: AC DC Voltage, Resistance, Continuity, Diode, Capacitance, Frequency, AC DC Current.

Over load protection, Safety Class: IEC 61010-1, CAT II 600V

Nice Protective Orange Rubber Case, against the shock of a drop.

Tips:

1. The automatic range digital multimeter has a large internal resistance (high input impedance), and there is induced voltage interference when open circuit. The AC DC gear will have a digital jump when it is turned on, but it will not affect the measurement.

2. When turning on the meter and move the dial to ohms, it reads of OL (default), it's normal. In this case, it means that Infinity of resistance.

Bulit-in Stand

The back stand can place the meter at 45 degree angle position and make you hands-free.