11 best temp controller

• 🥇🥇【Convenient Design】Plug and play, easy to use. Support °C/°F display.
• 🥇🥇【Dual Relay Output】Be able to connect with refrigeration and heating equipment at the same time.
• 🥇🥇【Dual Display Window】Be able to display measured temperature and set temperature at the same time.
• 🥇🥇【Buzzer Alarm】High and low temperature alarms are available when the temperature is over or the sensor is with issue.
• 🥇🥇【Safety】Maximum output load: 1100W(110V). It is with temperature calibration and compressor delay which can protect your refrigeration.

User questions & answers

Question:	Can I make my deep freeze into a fridge if I plug this into it
Answer:	As far as I know this is only for reptiles, but I’m no expert on mammals. I’d recommend finding one made specifically for young mammals.
Question:	Can I plug another heat belt into the cold outlet? I have one setup right now, would rather not buy another temp controller
Answer:	100% natural phosphorus free oyster shell calcium carbonate
Question:	Have a glass door cooler want to keep temp at 55 willthe probe wire conform to the door
Answer:	The whole is pretty small
Question:	Is the probe waterproof and usable to control homebrew strike water temp
Answer:	No it can’t be hung as it is. If you add some Velcro or some other adhesive yourself it could easily be hung. But as is no.

Product features

Dual Display

• Temperature Control Range：-50~120 °C / -58~248 ° F
• Temperature Resolution：0.1 ° C / 0.1° F
• Temperature Accuracy：±1°C (-50 ~ 70°C) / ±2°F (-58 ~ 160° F)

Heat or Cool Socket

• Temperature Control Mode：On/Off Control, Heating and Cooling
• Input Power：100 ~240VAC, 50Hz/60Hz
• Temperature Control Output：Max. 10A, 100V ~240V AC
• Relay Contact Capacity：Heating (10A, 100-240VAC)/Cooling (10A, 100-240VAC)

Plug & Play

• Buzzer Alarm：High and Low Temperature Alarm
• Ambient Temperature：-30~ 75 ° C / -22~ 167 ° F
• Dimension (Main Body)：140x68x33mm (5.5x2.7x1.3 inch)

Temp Probe

• Sensor Type：NTC sensor (Including)
• Sensor Length：2m / 6.56ft
• Input Power Cable Length：1.5m ( 5ft )

Application

• Simple to use: plug it in, set the temp ranges, place the probe, plug in the heater/cooler into the marked outlet.
• Be able to connect with refrigeration and heating equipment at the same time.
• Easily calibrated.
• Can display in Centigrade or Fahrenheit.
• Whether you need temperature control for fermentation, greenhouse, kombucha control or to set up your temperature project system, the ITC-308 temperature controller is a great choice.

User questions & answers

Question:	How much power does this unit draw
Answer:	Plugged it into my killawatt and by itself, it draws less than 0.1 watts. This was without running any heater or refrigerator through it.
Question:	Does it retain the settings if power is lost
Answer:	Yes they do I have unplugged mine for weeks at a time and when I plug it back in all the settings are still there
Question:	is the unit waterproof
Answer:	The probe is waterproof but the rest of the unit is not.
Question:	Can this be used in conversion of a deep freeze into a refrigerator
Answer:	Yes, it can. You can set temperature to above 32 degrees. I have used it to set temps to both freezing temps and frig temps.

Product features

ITC-308 Outlet Thermostat Temperature Controller

Home Brewing & Fermentation

• Adjust the temperature of the wine
• Keep the temperature constant
• Ensure the taste of the wine

Retile

• A comfortable choice for reptiles incubating, like lizards, turtle, snake, spider and so on

Greenhouse

• Temperature is an important condition for plant growth
• It is most beneficial to plant growth within a suitable temperature range.
• ITC308 can easily to realize ideal temperature control

• ✓ EFFORTLESS COOLING SETUP: Simply place the probe, plug-in the thermostat controller, and use the large 3-button interface to choose your desired temperature setting. Digital display supports units in both Fahrenheit and Celsius. Note: the controller is designed to have a 2-3 degree buffering zone before powering on again after reaching set temperature.
• ✓ EASE OF MIND: Handy LED cooling and power indicator lights allow you to see the controller’s status even in total darkness. Controller features a convenient hanging tab, and a bright, easy-to-read display inside a tough plastic housing.
• ✓ RUGGED CONSTRUCTION: The cord for the temperature probe and grounded 3-prong plug measure an extended 6-feet in length, designed to suit almost any application you can imagine.
• ✓ VARIETY OF USES: Our thermostat controller can be used for refrigeration, fermentation, greenhouse fan and more, keeping your various environments in their ideal temperature range.
• ✓ SAFE & RELIABLE: Our thermostat controller is ETL listed, and rigorously tested for quality control and safety. Conforms to UL Std No. 60730-1, 60730-2-9. Temperature control range is 40-108°F, temperature display range is 32 -140°F. Rated Voltage is 120VAC 60Hz, Max Loading: 8.3A 1000W. Do not immerse controller or probe into water.

User questions & answers

Question:	Is it the same one as the seedling mat one?they look exactly the same
Answer:	I don't know what that means
Question:	Just received mine. And it only turns on when the room temperature goes below the set temperature. It’s backwards. What’s wrong with it
Answer:	Hello and thank you for your interest in Moen products. The Moen 9792 Two-Handle Roman Tub Adjustable Valve with Shower Diverter, ½” CC Connection comes with the hose for the handheld handshower. If you have additional questions, please feel free to call us at 800-289-6636. Our current business hours are Monday through Friday from 8:00 am - 7:00 pm (Eastern Time).
Question:	Is this device UL certified
Answer:	That valve should work. Reach out to Delta tech support at 800-345-3358
Question:	Is there a warranty? If so, how long is it
Answer:	Hello and thank you for your interest in Moen products. The Moen 9792 Two-Handle Roman Tub Adjustable Valve with Shower Diverter, ½” CC Connection can be used with the Moen T944 Eva 2-Handle Roman tub Faucet Trim with Built In Diverter Valve. If you have additional questions, please feel free to call us at 800-289-6636. Our current business hours are Monday through Friday from 8:00 am - 7:00 pm (Eastern Time).

Product features

BN-LINK Digital Cooling Thermostat Controller for Cooling Device

BN-LINK Digital Cooling Thermostat Controller offers comfort, convenience, and energy saving benefits. Easy Plug-In Operation with LED Illuminated Indicator Lights & Three-Prong Ground Plug.

Keep it Cool

Keep your room or attic cool with our controller and a fan

Regulate Room Temperature

Set our controller up with a fan or other cooling device to regular the room temperature

Green Houses

Not too warm, not too cold. Use our controller for optimized temperature

• It does indeed read in deg F.
• Can control both heating and cooling output
• Has an alarm to indicate sensor failure or high temperature
• Highly accurate and reliable temperature controller
• Be more user friendly than the STC-1000

User questions & answers

Question:	Has anyone extended the sensor leads by another 30'? I am thinking about this to control my outdoor wood stove from inside
Answer:	I'm not sure the original thermistor will handle the heat of a wood stove, it is rubber coated. But with that said,with the thermistor at the max on my chart 110*C the resistance is down to 713 ohms. 60 feet of # 22 wire is about 1 ohm, # #24 is about 1.5 ohms, So the temperature error introduced by the extra wire is less than 0.02%.
Question:	can I set separate high and low temps to run a heat lamp in winter and cooling fan in the summer
Answer:	The answer is yes and no. Technically, you can run a heat and cooling cycle at the same time. The trigger temperature can be any temperature. But, the trigger temperatures for cooling and heating can not be more than 20C (36F) apart.All the information is in the included instructions, but the setting of this unit is not very easy to understand.There are two temperatures to set. The first one is the middle (or set) temperature. Nothing is actually triggered at this temperature.The second setting is the difference temperature. this is a +/- plus and minus temperature.So, if you want the heat to turn on at 15C (59F) and the cooling to turn on at 25C (77F), you need to "set" the temperature at 20C and the program the difference temperature at 5C; 20C +/-5C. The cooling relay is triggered at 25C. The heat relay is triggered at 15C. (Nothing is triggered at 20C)Seems strange, but that's how it works.See how easy?If you are using this for only one trigger, keep the difference setting as low as you can (0.3C?), and then the middle or set temperature becomes the trigger temperature for heat or cool.
Question:	Does this controller maintain the settings I program into it, even if the power goes off? Very important to know
Answer:	I've been using this controller for some time now on my keezer and fermentation chamber. Recently experienced a power outage at my house that lasted over 72hours. The unit does maintain settings both when manually powered down as well as if power is interrupted from the outlet. But even better than that, when the power came back the unit retained that it was in the "on" setting and turned back on without needing to be manually turned on. I have built out a few of these units for my needs as well as for friends. I love them.
Question:	does the display show actual temperature, or just the temperature preset
Answer:	It displays the actual temperature, you don't see the temperature preset unless you go to the program setting mode. Just remember, it only displays celcius. I have another thermometer in my cooler that displays the temperature in farenheit. It was a fun project to wire and set up. I am a complete novice with electrical circuits, but a fairly handy person.

Product features

Pretty simple DIY temperature controller!

Accurate, inexpensive temperature controller

Easy to program, works perfect once set up

• 👏👏【Convenient Design】Plug and play, easy to use. Support reading with Centigrade or Fahrenheit.
• 👏👏【Dual Display Window】Be able to display measured temperature and set temperature at the same time.Temperature calibration, over-temperature and sensor fault alarm. Maximum output load: 1200W (110V).
• 👏👏【Dual Time Cycle Setting】Can be set different temperature from day and night on the basis of the physical needs of animals and plants during 24 hours.
• 👏👏【Only Heating】Temperature Control Mode: On/Off Control. Please note it is only heating controller without cooling function. Both of the plugs can control the heating. But totally could not over 1200W.
• 👏👏【Sensor Length 】2m / 6.56ft

User questions & answers

Question:	Does this only do heat? Is there a model that is soley for cooling
Answer:	Yes. It is only do heat and the time. We have one for cooling. It is ITC-308.http://www.amazon.com/Inkbird-Itc-308-Temperature-Controller-Thermostat/dp/B011296704/ref=pd_sim_sbs_328_1?ie=UTF8&refRID=00PW2766SPNECBNVYWR0&dpID=417y0W4HFmL&dpSrc=sims&preST=_AC_UL160_SR160%2C160_
Question:	Does this product measure the humidity as well as the temperature
Answer:	Sorry, this ITC-306T cannot measure the humidity. However, we have a combination product that can control temperature and humidity. Pls see the link (https://www.amazon.com/dp/B01N56KEU6). Thanks!
Question:	Do I have to reset it every 24 hours? Or onceset is it good to go
Answer:	Once set, it stays set, even after power outages (of which I've had several since getting mine.)
Question:	Basically I am trying to keep the temperature between 80 and 85 degrees, this includes a heater and fan. How do I set this
Answer:	I initially found the flyer a little difficult to understand, but basically you have to set 2 variables, the target temperature and the temperature differential. So you would set the target temperature to 85 and the differential to 5 degrees. Thus if current tmp >= target - differential it shuts off. If current_tmp

Product features

Specification

• Temperature Control Range：-50~99 ℃，-58 ~ 210 °F
• Temperature Resolution：0.1°F
• Temperature Accuracy：± 2 °F (-58 ~ 160 °F)
• Temperature Control Mode：On/Off Control, Heating
• Input Power：100 ~ 240VAC, 50Hz/60Hz
• Temperature Control Output：Max. 10A, 100V ~240V AC

Packing list

• ITC-306T Temperature Controller*1
• Instructions*1

• Simplified Design---Easy to set. Support °F display
• One Relay Output---Switch between heating mode and refrigeration mode according to the device you plug into the controller. Maximum output load: 1100W(110V)
• Safe Protection---High and low temperature alarms are available when the temperature overshoots your desired temperature. Compressor delay protection time setting and Temperature calibration
• Warranty---1 year warranty for replacement or full refund without return. Comes with a 3m(9.8ft) waterproof probe sensor. Measure range is -4 ~ 212°F

User questions & answers

Question:	Are the PID settings adjustable or does it auto-tune to prevent oscillations in temp
Answer:	Hi, thanks for asking. The difference between these two version are as following. 1. ITC-608T supports a maximum output load of 1800W. 2. ITC-608T has two plugs for devices while this 308+200 supports 4 plugs, two for heating/cooling, two plugs for Humidification/dehumidification. 3. ITC-608T supports "time stage periods for temp control mode" - so you can program it to ramp the temperature up and/or down.
Question:	Can i purchase new thermisters seperaatley ? i had one fail this weekend and i had to remove one from a new controller that i had still in the box
Answer:	Yes, it can. Please use it within 10A(current).
Question:	I want to keep a mini fridge between 50°-60°, will this product be able to do that
Answer:	It turns off and on based on parameters you specify
Question:	can the probe be submerged in hot water
Answer:	Hello, thanks for asking. The unit will come with the probe, the probe is waterproof which level is IP67.

User questions & answers

Question:	Does this come with a temp probe? or do I need to purchase one? Thanks
Answer:	Excellent product todo se mira nítido
Question:	Can I use this like a attic fan thermostat, but for a window fan in the hot garage? Is it 100% AC power? Is a temp probe required or optional
Answer:	It is a projector screen to project onto. It does not have HDMI ports
Question:	I have temperature probes that have three wires. Can I use them with this controller? http://www.amazon.com/gp/product/B00FHVBKC4/ref=oh_aui_det
Answer:	It’s 66 inches from the bracket to bottom of screen when fully extended. But, top of screen, when fully extended, has 11.5 inches of black-out space that could stay would up into the screen, although you should leave an inch or two of black-out to make viewing area symmetrical.
Question:	Does it automatically switch between heating and cooling
Answer:	Hi, yes it’s a silver material screen which 1.5 gain and 160 degree viewing like it states in the listing. We are a US based small business, we stand behind our products.

Product features

Main features

• Fahrenheit and Celsius Display Can Be Choose
• More User-friendly Operating
• Switch Between Cooling and Heating Modes
• Control the Temperature by Setting the Temperature Set Value and the Difference Value
• Temperature Calibrating
• Refrigerating Control Output Delay Protection
• Alarm When Temperature Exceeds the Limit or When Sensor Error

Product description

Specifications :

Power supply : 90-265V AC/DC

SSR Solid state relay type included : 25A

Mounting Dimension: DIN: 1/16 (48mmX48mmX80mm)

Thermocouple included: M6*1 thread , K type , 2m cable

Display: Dual display for Fahrenheit(F) and Celsius(C)

Range: -1999 to 9999 (depends on the input signal)

Main Output: SSR: Open circuit: 4V, Closed Circuit: 24V40mA DC

Auto-tuning PID cooling/heating control

1 RELAY alarm: Normal open, capacity 250V/3A AC or 30V/3A DC

Accuracy: 0.2%

Universal Input: Thermo Resistor: PT100, Cu50 . Thermocouple: J,S,K,E,Wre3 ~ Wre25

Net Weight: about 150g

Individually programmable PID control parameters

P, I, d, controlling period, digital filter coefficient, and more… (for control theory experts only)

SSR control ready to connect external Solid State Relay to handle High current. Applications

K type thermocouple, 0-500℃, 2m cable (6 feet).

Compact design:

DIN: 1/16, great form-factor to be included/build-in to your product.

Apply with step control, 1 independent PID control for heating/cooling over temperature, pressure, level ,flown , etc..Widely used in auto system in line of light industry, chemistry, machine, metallurgy ,ceramics, pertrification industry, or temperature control and adjust system of food & beverage; oven; furnance, plastic extruder heating process etc;

One key operation, Auto-tuning PID/ Fuzzy PID control.Easy operation,Reliable performance Input: TC(K、J、S、E)/ RTD（Pt100、CU50）universal input, or 4-20mA/0-10V/0-75mV signal from standard pressure/level transmitter, Control output: RELAY SSR SCR 4-20mA 0-10V (If 4-20mA or 0-10V DC output,you can choose PID control or analog output)

Alarm output: 1 line output,7 kinds of alarm mode: high / low / high deviation / low deviation/ interval / out of interval /breakage alarm

• Dual LED Display: This PID temperature controller can read TEMPS in Fahrenheit (F) and Celsius(C) . You can choose Centigrade or Fahrenheit unit .
• TC/RTD universal input , such as K , J , E , Pt100 etc. SSR solid state relay output .
• Dual Output: 7 different Dual Output combinations with 1 relayed output and 1 SSR control voltage output.
• This temperature controller has built in autotuning . After you have set your temps you press and hold the blue button for a few seconds and the AT light will come on and run through an auto tuning program to get you the best PID results.
• Wide Application: This pid controller is widely used in auto system in line of light industry, chemistry, machinary , metallurgy, ceramics, pertrification industry, or temperature control and adjust system of food & beverage, smoker , incubator, oven; furnance, plastic extruder heating process etc.

User questions & answers

Question:	Do you have a higher Rated Thermocoupler for this unit Bought one and need a higher rated coupler
Answer:	Dear Customer , We have other two types of thermocoupler . Please search the ASIN : B07DP358BK or ASIN: B07DP3572J to buy . You can also click here to buy the thermouplers : https://www.amazon.com/dp/B07DP358BK?ref=myi_title_dp https://www.amazon.com/dp/B07DP3572J?ref=myi_title_dp Hope my answer can help you Thanks and Best Regards Jaybva Team
Question:	So this is indeed a mypin ta4 snr pid controller in this package
Answer:	A MYPIN TA4-SNR PID Temperature Controller , a 25A SSR and a K type thermocouple are included in this package
Question:	Will this power 12 volt lamps that total 7 amps? I am using them to heat an incubator
Answer:	This will form the basis for the control. The solid state relay that is listed has a 24V -200+ volt output switch for AC power. If you are using a DC (Battery) to supply the lights it won't work directly. Replacing the output relay with one that can handle 12 V will allow it to work. You could power the powersupply for the bulbs through this relay but the response will be delayed and your PID would be hard to program.
Question:	Does this do ramp-rate control
Answer:	Dear Customer , Thank you for your messge . This product doesn't have ramp-rate control feature . But we have another type of temperature controller with ramp-rate control function . Please contact our sales support team for more details via [email protected] . Hope my answer can help you . Best Regards Jaybva Customer Service Team

• ✓ EFFORTLESS HEATING SETUP: Simply set the temperature probe, plug-in the controller, and use the large 3-button interface to choose your desired temperature setting. Digital display supports units in both Fahrenheit and Celsius. Note: the controller is designed to have a 2-3 degree buffering zone before powering on again after reaching set temperature.
• ✓ EASE OF MIND: Handy LED heating and power indicator lights allow you to see the controller’s status even in total darkness. Controller features a convenient hanging tab, and a bright, easy-to-read display inside a tough plastic housing.
• ✓ RUGGED CONSTRUCTION: The cord for the temperature probe and grounded 3-prong plug measure an extended 6 feet in length, designed to suit almost any application you can imagine.
• ✓ VARIETY OF USES: Our thermostat controller can be used for seedling germination, rooting, brewing, heating, fermentation, and more, keeping your various environments in their ideal temperature range.
• ✓ SAFE & RELIABLE: Our thermostat controller is ETL listed, and rigorously tested for quality control and safety. Conforms to UL Std No. 60730-1, 60730-2-9. Temperature control range is 40-108°F, temperature display range is 32 -140°F. Rated Voltage is 120VAC 60Hz, Max Loading: 8.3A 1000W. Do not immerse controller or probe into water.

User questions & answers

Question:	Is there an instructional video on how to put the temperature controller and heating pad together? Or an instructions pamphlet
Answer:	Hello, you can plug the heating pad to this controller and set the desire temperature, place the sensor to where you want the temperature to be controlled(for example, into the soil) then it should start working. You can find the manual of this controller here: https://centurytimer.com/product_resources/BNQ-T7BH/Instruction-Manuals-for-Web-BNQ-T7BH.pdf
Question:	Can a heat lamp be plugged into it and control the heat like if it was a mat
Answer:	Is this accurate with a heat lamp?
Question:	Is it normal for this to make an audible clicking noise when it turns on? Just got mine set up and it clicks when it turns on
Answer:	Is there anyway to disable that clicking sound? I just got mine today and its right next to my bed so its really irritating clicking on and off every 5 minutes.
Question:	can this be used for 2 che lamps
Answer:	With the wattage and amperage it says it can supply it should easily be able to handle 2 lamps. Just run a strip off the plug and only have them 2 lamps controlled by the thermostat. AGAIN, as long as it will handle what they say it can handle. A 100watt bulb should only pull just under 1 amp.

Product features

BN-LINK Digital Heat Mat Thermostat Controller

BN-LINK Digital Thermostat Controller is your perfect solution to providing constant optimum temperature for a variety of uses. Our thermostat controller has an easy plug-in operation with LED Illuminated Indicator Lights & Three-Prong Ground Plug.

Effortless Set-Up

A manual is included with our thermostat controller. But with the simple interface, it won't be needed! Please follow these instructions:

1. Plug in the thermostat controller
2. Press and hold the "Set" button to enter the temperature setting
3. Press the UP/DOWN button to adjust the target temperature
4. Press the "Set" button again to complete the process

**Please note that there is a 2-3 degree buffering zone for the thermostat controller to turn your appliance on again**

Switch Between Temperature Units

To toggle between Fahrenheit or Celcius:

• Press and hold the DOWN button for 3 seconds for Celcius
• Press and hold the UP button for 3 seconds for Fahrenheit

Simply Plug Your Appliance In

Our BN-LINK heating thermostat controller has a simple design for the convenience of our customers. Plug in your appliance and watch our thermostat controller maintain the optimal temperature you've set for your needs.

Keep Your Pets Warm

Maintain perfect temperature control in reptile terrariums and small pet enclosures. Place the temperature probe where the heat source will target and watch your pets stay warm and happy.

Great for Seedling and Plant Germination Projects

Grow with BN-LINK. Our thermostat controller is ideal for maintain rooting temperatures in a tray and dome.

Variety of Uses

Help give your aquatic life a comfortable environment with the help of our thermostat controller.

Easy to Mount

With the mounting holes on the back of the thermostat controller, it allows you to customize your area. Mount anywhere you need the thermostat controller to be.

Product description

1. How Pymeter control temperature?

Temperature controller is actual Heating/Cooling controller, thus MUST SET ON-Temp to turn ON Heating/Cooling, and MUST SET OFF-Temp to turn OFF Heating/Cooling.

Heating starts at LOW Temp [ON-Temp(1oN, 2oN)], stops at HIGH Temp [OFF-Temp(1oF, 2oF)], thus for heating MUST SET 1oN(2oN) LESS than 1oF(2oF);

In heating mode, 1oN(2oN) is the minimum temp you allow, 1oF(2oF) is the maximum temp you allow.

Cooling starts at HIGH Temp [ON-Temp(1oN, 2oN)], stops at LOW Temp [OFF-Temp(1oF, 2oF)], thus for cooling MUST SET 1oN(2oN) GREATER than 1oF(2oF).

In cooling mode, 1oN(2oN) is the maximum temp you allow, 1oF(2oF) is the minimum temp you allow.

2. Reading temp is inaccurate?

Every Pymeter controller is calibrated before come out of factory, it is reading temp accurately!

Please don't compare it to common inaccurate thermostat、thermometer or temp gun. If you doubt Pymeter controller accuracy, please calibrate with ice-water mixture (it is 32F when ice is melting), and you will see which device is accurate then.

3. Beeper keeps sounding?

Probably it is the Alarm settings ( AL、AH、d7 ) you set are NOT the right temperature you want. AL is low temperature alarm(it sounds when current temp is AL or Lower), AH is high temperature alarm(it sounds when current temp is AH or Higher), d7 is difference alarm(it sounds when the temp deviation between sensor 1 and sensor 2 is over d7). If you don't need alarm function, please don't change the values of AL、AH、d7, the default values usually won't trigger alarm. You can factory reset by switching temp unit from F to C in setting.

Please download User Manual PDF in Product information.

• ✓【Dual Probes】Quite different from other thermostats, Pymeter temperature controller is equipped with 2 waterproof accurate sensors, make it possible to control 2 sockets for heater and cooler at the same time or separately.
• ✓【Dual Sockets】Each outlet has independent temperature controlled switch and it intelligently identify heating or cooling mode via ON & OFF set-point, it is very easy and flexible to keep target at desired temperature range.
• ✓【Safe and Reliable】Support High and Low Temperature Alarm; Temperature Difference Alarm, this is very helpful to keep target safe from malfunction of any one probe. Cooking fishes NEVER happen!
• ✓【Enhanced Functions】Power-Off Memory; Power-On Delay; Temperature Calibration.
• ✓【Widely Used】Pre-wired, just plug in and play, suitable for various applications: kimchi refrigerator, garage freezer, carboy heater, home brew kit, chicken coop water heater, water chiller, swamp cooler, seedling heat mat, reptile heating pad, heat lamp, oven thermostat, beer brewing kit, fermenter fermentation bucket, heat mat for plants, grow tent heater etc.

User questions & answers

Question:	The max temp is 210 Fahrenheit correct
Answer:	Yes, correct.
Question:	How do I change the probes from cool to heating in settings? What buttons do I press in what order
Answer:	Cooling and heating are relevant to the "turn on at 'x' temp" and "turn off at 'x' temp" if it is not working in your preference currently, try switching some measurements in opposites of each other.
Question:	How do we get a "Free New Replacement" as mentioned below
Answer:	Please contact support on www-pymeter .com or send message to us on Amazon directly.
Question:	Can you send me a copy of the instructions? Mine didn’t come with any
Answer:	Sorry for that. Please read/download the instruction via this link: https://www.pymeter.com/PY-20TT-User-Manual.pdf, any further question, just message us on Amazon directly :)

Product features

Pymeter Heating and Cooling Temperature Controller

Pymeter Digital Temperature Controller is easy to use, safe & reliable dual outlets thermostat. It is used as over temperature protection or automatic temperature control system with various electric appliances such as heaters for Reptile, Aquarium, Greenhouse, Home Brew, Fermentation, Accelerating Germination, Plant Grow Tent, Pet Breeding, Incubation, BBQ, Terrestrial Heat Control, Aquarium Cooling Fan, Electric Radiator, Electric Oven, etc.

Advantage compare to other Thermostat:

Parameters

Temperature Range: -50~99°C/ -58~210°F; Temperature Resolution: 0.1°C/ 0.1°F

Controller Dimension: 8.26x2.16x1.57 inch; Temperature Accuracy: ±1°C/ ±1°F

Input: 85~250VAC, 50/60Hz; Output: 85~250VAC, MAX 10A

Buzzer Alarm: High/Low Temperature, Differential Temperature, Sensor Fault

Input Power Cord: 4.5ft; Sensor Cable: Waterproof Sensor x2; 2m/ 6.56ft.

Widely Applied

Product description

The WH1436 temperature controller can turn on/off an electric appliances at desired temperature. For example, you can use the controller to turn on a heater at 99. 9 F and turn it off at 100 F. Or turn on a freeze at 52 F and turn it off at 45. 3 F. (Please be noted that the controller itself doesn't change temp. You need to use heater or refrigeration equipment with it. ) Main features: Plug and play. No worry about wiring. Maximum load: 1100 watts @110 volts Heating OR refrigeration working mode. Celsius or Fahrenheit read-out. Temperature calibration. Compressor delay protection time setting. High and low temperature alarms are available(This is a useful function. You can use this feature to alarm you when the temperature overshoots your desired temperature) Auto shut off timer(It doesn't turn off the controller itself. The timer just turns off the load when specified minutes counts down to 0. ) Specification: 1. Power supply: AC 110V 50/60Hz 2. Measure range: -58 ~ 230 F(-50 ~ 110 C) 3. Temperature resolution: 0. 1 4. Accuracy: 0. 5 5. Working mode: Heating OR Cooling mode 6. Slew range of temp controlling: 0. 1 - 230(difference between turn-on degree and turn-off degree) 7. Control resolution: 0. 1 8. Power consumption: less than 3W 9. Relay contact capacity: 10A 10. Store setting after power off: YES 11. press or delay protection: YES 12. High and Low Temperature alarm: Yes 13. Product size: 4. 9x3. 6x1. 8 inch (12. 5x9. 1x4. 5 cm) 14. Sensor Cable length: 3m(9. 8ft) Advanced function: 1. Switch temperature unit(Default: F): F or C 2. Switch resolution(Default: 0. 1): 0. 1 or 1 3. Auto shut off timer(Default: OFF) Package Content: 1x WH1436A Temperature controller 1x sensor cable

• WE'VE IMPROVED THE CONTROLLER: simplified operation, larger power, wider control range, standard U.S. outlet, enhanced waterproof sensor probe. Get the new version right now.
• KEEP TEMP IN DESIRED RANGE: Turn on your device at a set degree and turn it off at another set degree. The difference of the 2 degrees can be minimum 0.1 and maximum 288.
• HEATING OR REFRIGERATION WORKING MODE: Switch between heating mode and refrigeration mode according to the device you plug into the controller .
• MAX LOAD: 1100W at 110V. Outlet not compatible with 2 hot lines 220V plug (Celsius or Fahrenheit Read-out).
• WIDE RANGE OF USES: seedling heat mat, home brewing, aquarium, pet breeding, incubation, BBQ, fermentation, accelerating germination, electric radiator, electric oven, etc . Total Outlet: 1

User questions & answers

Question:	can the temperature probe be submerge in liquid? I want to use it for my slow cooker for sous vide cooking
Answer:	I use this device to measure the water temperature in my old fashioned ceramic crock slow cooker by filling the crock with water, placing the probe into the water and setting the temperature to on at low setting and off at high setting. I plug the slow cooker into the thermometer, and turn it on high to get to temperature(adding hot water from the sink to shorten this wait time) then low for cooking. It measures the temp of the water very accurately and I've been able to cook vacuum sealed meats in the water to the desired temperature. I have had 3 out of 3 successful cooking events using this method.
Question:	I purchased one of these and did not come with instructions. could someone tell me how to change c- f? i've tried everything. also other codes
Answer:	Press SET and UP at the same time and release buttons until CF appears on the screen. Then click set, then click UP or Down to choose C or F.Please note, once advanced setting is changed, all other settings will be reset to default. Please email us [email protected] for PDF manual.
Question:	If power is lost, does it remember the temperature setting or does it need to be reset
Answer:	This device remember all the settings even in case of accidental power supply is lost. You do not need to reset everything you use it.
Question:	What is that output connector? Is that some sort of US / Euro combo socket? Will it accept a USA standard NEMA-15 plug and hold it securely
Answer:	Yes. The socket on the controller is compatible with most plugs in the world. It's not a problem to hold US standard NEMA-15 plug securely.

Product features

The WH1436A temperature controller can turn on/off an electric appliances at desired temperature

For example, you can use the controller to turn on a heater at 99. 9 F and turn it off at 100 F. Or turn on a freeze at 52 F and turn it off at 45. 3 F. (Please be noted that the controller itself doesn't change temp. You need to use heater or refrigeration equipment with it. )

Specification

• Power supply: AC 110V 50/60Hz w/ NEMA 5-15 AC Plug
• Relay contact capacity: 10A (Maximum load: 1100 watts @110 volts)
• Measure range: -58 ~ 230 F(-50 ~ 110 C)
• Temperature resolution: 0.1; Control resolution: 0.1;
• Accuracy: 0.5 (Can be calibrated)
• Working mode: Heating OR Cooling mode
• Slew range of temp controlling: 0.1 - 230 (difference between turn-on degree and turn-off degree)
• Power consumption: less than 3W
• Sensor Cable length: 3m(9.8ft)
• Product size: 4.9x3.6x1.8 inches (12.5x9.1x4.5cm)

Advanced setting

• Switch temperature unit(Default: F): F or C
• Switch resolution(Default: 0.1): 0.1 or 1
• Auto shut off timer(Default: OFF)

Useful function

• High and low temperature alarms are available (You can use this feature to alarm you when the temperature overshoots your desired temperature)
• Auto shut off timer (It doesn't turn off the controller itself. The timer just turns off the load when specified minutes counts down to 0.)

Package Content

• 1x WH1436A Temperature controller
• 1x sensor cable
• 1x manual