13 best fasco pellet stoves
Fasco pellet stoves are heating appliances that utilize wood pellets as a fuel source to generate heat for residential or commercial spaces. These stoves are part of the HVAC (Heating, Ventilation, and Air Conditioning) industry and are commonly used in homes for their energy efficiency and eco-friendly features. Here are some key points related to Fasco pellet stoves:
Energy Efficiency: Fasco pellet stoves are known for their high energy efficiency. They burn wood pellets, which are compressed and highly efficient, producing a consistent and clean heat source.
Environmentally Friendly: Using wood pellets as fuel is considered environmentally friendly. Pellets are typically made from sawdust and wood shavings, which are byproducts of the lumber industry, making them a renewable and sustainable fuel source.
Heating Capacity: Fasco pellet stoves come in various sizes and heating capacities to suit different room sizes and heating needs. They can provide efficient heat for small to large spaces.
Convenient Operation: These pellet stoves are designed for easy and convenient operation. They often come with programmable thermostats, timers, and remote controls, allowing users to adjust the heat output and temperature settings as needed.
Pellet Hopper: Fasco pellet stoves have a pellet hopper where the wood pellets are loaded. The size of the hopper can vary, affecting how long the stove can operate before needing a refill.
Automatic Ignition: Many Fasco pellet stoves feature automatic ignition systems, eliminating the need for manual lighting. This makes them user-friendly and convenient to use.
Safety Features: These stoves are equipped with various safety features, including temperature controls and safety shut-off mechanisms to prevent overheating and ensure safe operation.
Maintenance: Regular maintenance is necessary to keep Fasco pellet stoves operating efficiently. This includes cleaning the burn pot, chimney, and ash removal.
Ventilation: Proper ventilation is essential when using pellet stoves. They typically require a venting system, such as a vent pipe or chimney, to expel combustion gases safely.
Installation: Fasco pellet stoves should be installed by professionals to ensure safe and proper operation. Installation involves connecting the stove to the venting system and providing adequate clearance from combustible materials.
Aesthetics: These stoves often come in a variety of designs and finishes to match different interior aesthetics. They can be a functional and stylish addition to your home.
Fasco pellet stoves offer an efficient and eco-friendly way to heat spaces, making them a popular choice for homeowners looking for an alternative to traditional heating methods. Their convenience and environmentally conscious features make them a reliable heating solution for many households.
Below you can find our editor's choice of the best fasco pellet stoves on the market
Enviro Pellet Stove Convection Motor Blower
Product description
..If you want Peace and Quiet with Low Vibration…You found the right motor. This motor is so quiet; you won’t know your stove is on. Estimated Lifespan: 15-20 years. Fasco uses the highest standards of engineering with parts calibrated within 1/10,000th of an inch. The room for error is so small is has to be checked using a microscope. Your new motor is designed for Variable Speed which requires high quality electronic components not included in other motors. High temperature rubber bushings and washers are used to Damper Vibration. Go Green. In accord with new environmental standards your new motor is more efficient so it cost less to run. Wiring - Your new motor may have a electrical plug that is different from you old motor. Cut the new plug off and splice the wires to the old wiring using your choice of electrical connector. It doesn't matter which wire goes to which as long as they are connected.
- FREE Tech Support. Use amazon messager to contact seller.
- RPM: 3000 ; Voltage: 115 VAC 60 Hz
- Motor Protection: Thermally Protected
- 30 Day Return Policy
- Warranty: 1 Year
User questions & answers
| Question: | Will this replace Falcon 7021-848S |
| Answer: | If I remember right , it is 6 ' long |
| Question: | What cfm is it rated at |
| Answer: | Mine worked and held (but I agree - not really tacky and made a helluva mess) but I've used this before and should "stick" better http://www.amazon.com/Stove-Gasket-Cement-77E-2-3oz/dp/B000H5R5M4/ref=sr_1_5?ie=UTF8&qid=1453225298&sr=8-5&keywords=rutland+fireplace+gasket |
| Question: | Will yh iui s fir 5660 ashley |
| Answer: | There may be a semi circular groove on the door or the frame. If you measure the width of that groove, it should represent the diameter of the gasket material you need. |
| Question: | Does it come with the pictured wiring adapter to convert from single white plug to dual connectors |
| Answer: | Yes. That’s the model I just did myself. |
Breckwell Pellet Stove Convection Motor Blower C-E-033 - 11-1210 G
Product description
Fits the following Breckwell Pellet Stove Models. Breckwell P22 Maverick Breckwell P22I Maverick Insert Breckwell P23 Sonora Breckwell P23I Sonora Insert Breckwell P24 Blazer Breckwell P24I Blazer Insert Breckwell P24 FS Breckwell P26 Cadet Breckwell P32i Cadet Breckwell P1000 Big E Home & Utility (PWA/PCA) Breckwell P2000 Tahoe Breckwell P2000I Tahoe Insert Breckwell P2700 Mojave Breckwell P4000 Classic Cast or "Vermont" Breckwell SP6000 Heartland Pre 2013 Breckwell P7000 Solstice Ultra Quiet motor designed by Fasco>>>If you want Peace and Quiet with Low Vibration…You found the right motor. This motor is so quiet; you won’t know your stove is on. Estimated Lifespan: 15-20 years. Fasco uses the highest standards of engineering with parts calibrated within 1/10,000th of an inch. The room for error is so small is has to be checked using a microscope. Your new motor is designed for Variable Speed which requires high quality electronic components not included in other motors. High temperature rubber bushings and washers are used to Damper Vibration. A FREE high temperature micro fiber low vibration gasket is included with you motor to insure you have the highest quality item available anywhere. Go Green. In accord with new environmental standards your new motor is more efficient so it cost less to run. Heat Reduction>>>> FascoExhaustMotors are tested to run 24/7 in hot and dusty atmospheres. Your new motor has a Internal cooling fan designed for heat reduction. Calibrated for high stress operations which keeps the motor cooler and makes it last longer. This combined with Ultra Quiet Engineering results in a motor that lasts a very long time while remaining quiet. Wiring - Your new motor may have a electrical plug that is different from you old motor. Cut the new plug off and splice the wires to the old wiring using your choice of electrical connector. It doesn't matter which wire goes to which as long as they are connected.
- FREE Tech Support. Use amazon messager to contact Seller.
- RPM: 3000 ; Voltage: 115 VAC 60 Hz
- Motor Protection: Thermally Protected
- Termination: 2 wire with AMP terminal
- Warranty: 1 Year
User questions & answers
| Question: | what fasco motor is on this |
| Answer: | Yes. |
| Question: | where can i get a replacement motor for my ashley pellet stove it’s a fasco draft inducer 1.9 apps 120 v |
| Answer: | 1 hp is rated to 15.9 cfm. Therefore, 1/35 hp equals (approx) .454 cfm. |
| Question: | Will this blower work on a vogelzang model |
| Answer: | It may fit but if you use this motor on any other brand than Enviro, it voids the warranty. |
| Question: | I have a us stove model 5660 with a variable speed motor. will this work? is it variable speed |
| Answer: | We ordered this same product last month and yes it was included. Everything in the picture is included. |
Replacement Blower for Wood Stoves 50755-D500 Heat Tech, Nesco, US Stove, Mt. Vernon, Arrow Heating, Waterford Stove, Even Temp, Earth Stove, Travis, Country Flame, Martin Industries, Regency
Fasco
Product description
General replacement wood stove fireplace blower. Replaces: Fasco 50755-D500, Mt. Vernon Fireplace 7063-5031, Arrow Heating 7063-5313, Waterford Stove 7063-5921, Even Temp 7063-6692, Earth Stove (Hearth Trends) 7063-8255, Travis 7063-8259, Country Flame 7063-8322, Martin Industries 7063-8369, Even Temp 7063-8537, Travis 7063-8571, Earth Stove (Hearth Trends) 7063-8585, Even Temp 7063-8873, Regency 7063-9224, Heat Tech 7063-9534, Nesco 7063-9813, Even Temp 7073-0616, U.S. Stove 7073-1480. 160 CFM, Sleeve Bearing, 115 V, 1600 RPM, 1-Speed. Discharge Flange Mounting Holes: 4.12" x 1.47".
- General Replacement Stove Blower
- 160 CFM, 1600 RPM, 115 V, 1 Speed
- Sleeve Bearing
- Discharge Flange Mounting Holes: 4.12" x 1.47"
- Replaces: Fasco 50755-D500, WWG 1C982
User questions & answers
| Question: | Motor getting hot 180 degrees is this normal |
| Answer: | Looks like c-e o33a |
| Question: | How do i wire this it has 2 black wires one hot one neutral? If its backwards it will just spin backwards right |
| Answer: | This motor will work on your ashley stove...https://www.amazon.com/dp/B01MXS9TWU?ref=myi_title_dp |
| Question: | Is this item quiet? Can a fan adustment be added |
| Answer: | No, you need the mirror opposite which is this one...https://www.amazon.com/dp/B01N2KCIB5?ref=myi_title_dp |
| Question: | What US stove pellet stove part numbers does it replace |
| Answer: | It is variable speed and will work with that model. |
Enviro Pellet Exhaust Combustion Motor Blower w/Gasket (Open Housing)
Product description
Fits Enviro Pellet Stoves: EF2 EF3 EF4 EF5 (Evolution) Empress FS Empress FPI Meridian Milan Mini Solus Windsor Enviro part# 50-901 Replaces part # EF4i-007, EF-007, EF5-114 50-473. Ultra Quiet Engineering - If you want Peace and Quiet with Low Vibration…You found the right motor. This motor is so quiet; you won’t know your stove is on. Estimated Lifespan: 15-20 years. Fasco uses the highest standards of engineering with parts calibrated within 1/10,000th of an inch. The room for error is so small is has to be checked using a microscope. Your new motor is designed for Variable Speed which requires high quality electronic components not included in other motors. High temperature rubber bushings and washers are used to Damper Vibration. A FREE high temperature micro fiber low vibration gasket is included with you motor to insure you have the highest quality item available anywhere. Go Green. In accord with new environmental standards your new motor is more efficient so it cost less to run. Wiring - Your new motor may have a electrical plug that is different from you old motor. Cut the new plug off and splice the wires to the old wiring using your choice of electrical connector. It doesn't matter which wire goes to which as long as they are connected.
- FREE Tech Support. Use amazon messager to contact Seller
- RPM: 3000 / Voltage: 115 VAC 60 Hz
- 3o return policy
- Termination: 2 wire with AMP terminal
- Warranty: 1 Year
Breckwell Pellet Big E Exhaust Combustion Motor w/Silicone Gasket A-E-027
Breckwell
Product description
Ultra Quiet Engineering - If you want Peace and Quiet with Low Vibration…You found the right motor. This motor is so quiet; you won’t know your stove is on. Estimated Lifespan: 15-20 years. Fasco uses the highest standards of engineering with parts calibrated within 1/10,000th of an inch. The room for error is so small is has to be checked using a microscope. Your new motor is designed for Variable Speed which requires high quality electronic components not included in other motors. High temperature rubber bushings and washers are used to Damper Vibration. A FREE high temperature micro fiber low vibration gasket is included with you motor to insure you have the highest quality item available anywhere. Go Green. In accord with new environmental standards your new motor is more efficient so it cost less to run. Wiring - Your new motor may have a electrical plug that is different from you old motor. Cut the new plug off and splice the wires to the old wiring using your choice of electrical connector. It doesn't matter which wire goes to which as long as they are connected.
- FREE Tech Support. Use amazon messager to contact Seller
- RPM: 3000 ; Voltage: 115 VAC 60 Hz
- Motor Protection: Thermally Protected
- 30 Day Return Policy
- Warranty: 1 Year
User questions & answers
| Question: | Will this work on model#5500M pellet stove 3000rp |
| Answer: | It doesn’t get that hot on my unit. 120 tops |
| Question: | Breckwell p2000i.Fan comes on heats up then shuts off. Replaced everything but combustion and convect motor. Will one of these help with the problem |
| Answer: | I took the cord off of my old blower and placed it on there. It appeared that it did not matter what wire it used for going to positive or negative as I wired it both ways and worked both times. However, I did attach the ground to the motor itself. Hope that helps ?? |
| Question: | Does it come with a -0101 housing gasket |
| Answer: | Yes it is quiet but not sure about the fan adjustment. |
| Question: | Two questions - will this work with the p23fs built in 2008? and, is this blower quieter than the orginal? my p23fs has been noisy since day one |
| Answer: | It fitted on my older Timberline |
Fasco B24220 Centrifugal Blower with Sleeve Bearing, 2600rpm, 115V, 50/60Hz, 1.3 amps
Fasco
Product description
Thermally protected. UL recognized. CSA or ULc certified. Centrifugal blower with sleeve bearing. CFM at Static Pressure as follows: 140 at 0.4", 130 at 0.6", 120 at 0.8", 110 at 1", 45 at 1.2" and 22 at 1.4". 50/60Hz Frequency. 2600rpm at free air. 115 Volt. 1 Speed. 1.3 amps at free air. Nameplate CFM: 135.
From the Manufacturer
For nearly a century, Fasco has been designing and manufacturing what has become the industry's most respected line of AC motors and blowers. Fasco B24220 is a 115 Volt Single Speed 135 CFM Blower Assembly.
- Thermally protected
- UL recognized
- CSA or ULc certified
- Centrifugal blower with sleeve bearing
- Nameplate CFM: 135
- 115 Volts, 2600 RPM, 1.3 Amps, 135 CFM
- Single Speed
User questions & answers
| Question: | i have a keystoker coal stove. the blower motor i have has a part number 7063-8154. will this blower work |
| Answer: | Yes on all Brock well stoves |
| Question: | I am looking for a blower for my breckwell p23. looks like this will work but the rpms and amperage are lower than the one that came with the oven |
| Answer: | Have you cleaned behind the two doors in the wall behind the ash pan? You might have a bad thermodisk on either side of the machine. Jump them out of the equation and introduce them one by one to see if that is the problem. If the motors run,something is causing them to stop. |
| Question: | Can i use a solid state variable speed ac electric motor control, on this fan |
| Answer: | Don’t know. It was ready to install |
| Question: | I have a vista flame vf100, will this work on it or do you have a model that does |
| Answer: | No idea if it will work on other than the specified stove, but on my stove it is quieter. |
Quadrafire Pellet Exhaust Combustion Blower Castile 812-4400 - PP7620 MFR
Product description
Ultra Quiet Engineering - If you want Peace and Quiet with Low Vibration…You found the right motor. This motor is so quiet; you won’t know your stove is on. Estimated Lifespan: 15-20 years. Fasco uses the highest standards of engineering with parts calibrated within 1/10,000th of an inch. The room for error is so small is has to be checked using a microscope. Your new motor is designed for Variable Speed which requires high quality electronic components not included in other motors. High temperature rubber bushings and washers are used to Damper Vibration. A FREE high temperature micro fiber low vibration gasket is included with you motor to insure you have the highest quality item available anywhere. Go Green. In accord with new environmental standards your new motor is more efficient so it cost less to run.
- FREE Tech Support. Use amazon messager to contact Seller
- RPM: 3000 ; Voltage: 115 VAC 60 Hz
- 30 Day Return Policy
- Termination: 2 wire with AMP terminal
- Warranty: 1 Year
Fasco A082 75 CFM 115 Volt 3000 RPM Centrifugal Furnace Blower Draft Inducer
Fasco
Product description
Thermally protected. UL recognized. CSA or ULc certified. Centrifugal blower with sleeve bearing. CFM at Static Pressure as follows: 66 at 0.1", 62 at 0.2", 53 at 0.3", 52 at 0.4", 47 at 0.5", 42 at 0.6" and 23 at 0.7". 60Hz Frequency. 2800rpm at free air. 115 Volt. 1 Speed. 0.95 amps at free air. Nameplate CFM: 75.
From the Manufacturer
For nearly a century, Fasco has been designing and manufacturing what has become the industry's most respected line of AC motors and blowers. Fasco A082 75 CFM 115 Volt 3000 RPM Blower Assembly is a Centrifugal Blower Assembly.
- Thermally protected
- UL recognized
- CSA or ULc certified
- Centrifugal blower with sleeve bearing
- Nameplate CFM: 75
- 115 Volt, 3000 RPM, 0.95 Amps, 75 CFM
- Single Speed
User questions & answers
| Question: | well this work on the st.croix auburn pellet stove |
| Answer: | Your number cross references to Fasco blower B45227.http://www.amazon.com/dp/B000BULTKO. We have this in stock and can ship today. |
| Question: | How did everyone connect their fan to exhaust their stove properly |
| Answer: | Based on what you stated I would say this is the wrong blower. You say this one has lower RPMs and amps, then this one is not strong enough. Also I do not know what blower is used in your stove. |
| Question: | Will this work with an Avalon Astoria Bay wood pellet stove |
| Answer: | I used, KB Electronics Panel Mount Solid State Variable Speed AC Motor Control 4.0 Max amps # A177-1004. In my application, a fireplace heatalator with what I think is a lot of air resistance, the fan seems to vibrate more and is nosier at the lower speeds. |
| Question: | Does anyone know the diameter of the impeller |
| Answer: | Not sure about the vista flame but it fit perfect on my breckwell big e, bolted right on, replaced fasco 702112105 hope this helps |
Fasco 50752-D500 Centrifugal Blower with Sleeve Bearing, 3,100 rpm, 115V, 60Hz, 1.1 amps
Fasco
Product description
- 135 CFM free air output-rated centrifugal blower for use in heating and ventilation appliances
- Sleeve bearing for blower motor shaft support
- 115V, 60Hz, 1.1 amps power input for multiple uses
- 108 CFM air flow rate at 0.1" SP
- UL recognized and CSA certified for quality assurance
User questions & answers
| Question: | Will this replace a Fasco no 7021-4765 CJ |
| Answer: | Ours is a Jamestown, and we had to fabricate an attachment to get it to fit. Don't know about the St. Croix. |
| Question: | Does this blower fit King KP130 pellet stove |
| Answer: | Put it in the same way it comes out!! Repair manuals are readily available on The Net!! It was about an Hour Job to take the old blower out and install the New one!! Joe and Kim |
| Question: | What country is it made in |
| Answer: | I wish that a definite yes could be said. I put mine in a Breckwell p24I and required only redrilling 2 holes. Check the Breckwell part # against your part # and if it matches and you can do minor work it was the best price I could find. I believe that I also needed to change the pig tail for electric. |
| Question: | what are the dimensions of the flange and bolt pattern for mounting |
| Answer: | It looks like 4.5 inces. |
Fasco B45267 Centrifugal Blower with Sleeve Bearing, 1,600/1,400 rpm, 115V, 60Hz, 2.9 amps
Fasco
Product description
- 460 CFM free air output-rated centrifugal blower for use in heating and ventilation appliances
- Sleeve bearing for blower motor shaft support
- 115V, 60Hz, 2.9 amps power input for multiple uses
- Two-speed fan, 393/356 CFM air flow rate at 0.1" SP
- UL recognized and CSA certified for quality assurance
User questions & answers
| Question: | What size is the opening of the air outlet |
| Answer: | According to the Fasco cross reference Fasco 50752-D500 is the suggested replacement for 7021-4765. BUT the notes say "TURN MOTOR 180 DEGREES". Based on that I would caution you as I have no clue if you are able to do this or not. It is not simply plug & play and there are no instructions. |
| Question: | Will this work for extraction of vapors |
| Answer: | Auqua therm wood boiler with modification. |
| Question: | I have a us stove 1557m. will this work, if yes do i wire it with low speed wire or high speed |
| Answer: | I purchased my blower in December 2015 from amazon the label said that it is from Mexico. |
| Question: | What size is the outlet opening |
| Answer: | The center of the holes going across are 4.12 apart and the center of the holes going up and down are 1.50 apart, the flange itself is 5.09 across and 4.3 going up and down. |
Fasco A143 3.3" Frame Shaded Pole OEM Replacement Specific Purpose Blower with Sleeve Bearing, 1/50HP, 3000rpm, 115V, 60Hz, 0.95 amps
Fasco
Product description
Thermally protected. UL recognized; CSA or ULc certified. Clockwise shaft end rotation. Specific purpose blower with sleeve bearings. For gas or oil furnaces and heaters. 3000rpm Speed rating. 1/50 Horse power. 3.3" Diameter. 115 Volt. 0.95 amps. Sleeve bearing. Cross reference information: Trane 7021-8428, 7021-8013, 7021-8924, 7021-9639, 7021-9055, Jakel J238-138-1344.
From the Manufacturer
For nearly a century, Fasco has been designing and manufacturing what has become the industry's most respected line of AC motors and blowers. Fasco A143 115 Volt 3000 RPM Blower Assembly is a single speed motor for a High Efficiency Furnace.
- Thermally protected
- UL recognized; CSA or ULc certified
- Clockwise shaft end rotation
- Specific purpose blower with sleeve bearings
- OEM replacement for Trane 7021-8428, 7021-8013, 7021-8924, 7021-9639, 7021-9055, Jakel J238-138-1344
- 115 Volts, 3000 RPM, 0.95 Amps, Rotation: CWSE
- Shaded Pole Motor, Sleeve Bearing, Single Speed
User questions & answers
| Question: | This product has similar spec and the picture looks the same with magnetek ja1P092ns. Does anyone know if this can be replaced for magnetek ja1P092ns |
| Answer: | It’s about medium size |
| Question: | Will this replace the Jakel J238-150-15265? 120V 60hz 1.8amp |
| Answer: | I think that this fan would work for extraction of vapors if the fan was exhausted into an outside ducting. It would need to be installed with insulation between the mounts to reduce the vibration of the motor. |
| Question: | I've got a Jakel J238-138-1378 and cannot find a cross reference. Do I have an obsolete Part number and this is the X-reference |
| Answer: | yes, it will work, I cant remember but I think high speed. |
| Question: | This comes with all the wire's attachment do yo have a pic of the wire's |
| Answer: | Outlet opening is 3-3/4" x 8". Distance between centers of corner mounting holes is 4-3/8" x 8-3/4". |
Fasco B47120 Centrifugal Blower with Sleeve Bearing, 1360/1100/830rpm, 115V, 60Hz, 1.95 amps
Fasco
Product description
Thermally protected. UL recognized. CSA or ULc certified. Centrifugal blower with sleeve bearing. CFM at Static Pressure as follows: 180/144/112 at 0.1", 170/140/109 at 0.2", 165/134/106 at 0.3", 165/130/100 at 0.4", 150/122/90 at 0.5", 140/117/76 at 0.6", 130/87/58 at 0.7", 110/72 at 0.8" and 90 at 0.9". 60Hz Frequency. 1360/1100/830rpm at free air. 115 Volt. 3 Speed. 1.95 amps at free air. Nameplate CFM: 180.
From the Manufacturer
For nearly a century, Fasco has been designing and manufacturing what has become the industry's most respected line of AC motors and blowers. Fasco B47120 is a 115 Volt 3 Speed 180 CFM Blower Assembly.
- Thermally protected
- UL recognized
- CSA or ULc certified
- Centrifugal blower with sleeve bearing
- Nameplate CFM: 180
- 115 Volts, 1360/1100/830 RPM Free Air, 1.95 Amp, 180 CFM
- Three Speed
User questions & answers
| Question: | what is hp rating |
| Answer: | I'm replacing the same unit. It fits perfectly but I just now discovered that the new unit is missing the vacuum nipple to hook up the pressure switch. I'm currently trying to get that resolved. |
| Question: | Is there sealed bearing version of this blower either in Fasco, Dayton or AO Smith |
| Answer: | sorry we are unable to cross ref your part number to the Fasco A143 or any other direct replacement. Your blower is OEM back to your furnace brand. |
| Question: | Are the bearings maintenance free |
| Answer: | Douglas, I bouth the A143 draft inducer blower through Amazon. It was listed as a direct replacement for the Jakel J238-138-1344 (mine was a J238-138-1344M) and it works okay. Look for your Jakel number in the listing at Amazon or cross-reference with a Fasco number then to those listed at Amazon. The motors do not come with a gasket, I used the highest temperature rated permatex silicon for a gasket.Hope this helps.Paul |
| Question: | Can this be used with a Harman Accentra Insert? I noticed its 3 speed but some of the replacements I have seen are 1500 rpm only, I think |
| Answer: | Not on this Amazon listing. What is the part number of your old motor? Steve |
PelletStovePro - Lopi Pellet Exhaust Combustion Motor Blower - 812-0051 G - 250-00527, 90-0391
Product description
Lopi Pellet Exhaust Combustion Motor Blower - 250-00527, 90-0391 . Ultra Quiet Engineering - If you want Peace and Quiet with Low Vibration…You found the right motor. This motor is so quiet; you won’t know your stove is on. Estimated Lifespan: 15-20 years. Fasco uses the highest standards of engineering with parts calibrated within 1/10,000th of an inch. The room for error is so small is has to be checked using a microscope. Your new motor is designed for Variable Speed which requires high quality electronic components not included in other motors. High temperature rubber bushings and washers are used to Damper Vibration. Go Green. In accord with new environmental standards your new motor is more efficient so it cost less to run. Wiring - Your new motor may have a electrical plug that is different from you old motor. Cut the new plug off and splice the wires to the old wiring using your choice of electrical connector. It doesn't matter which wire goes to which as long as they are connected.
- FREE Tech Support. Use amazon messager to contact seller.
- RPM: 3000 / Voltage: 115 VAC 60 Hz
- 3o return policy
- Lopi Pellet Exhaust Combustion Motor Blower - 250-00527, 90-0391
- Warranty: 1 Year
User questions & answers
| Question: | Can i use this with a kb solid state variable speed ac electric motor control; need to retrofit to old horizan pellet stove; (dimensions match |
| Answer: | Yes you can use that for a Harman Accentra Insert, its the same one , that you would get for a dealer. Instead using the 3 speed you are just going to wire it using one speed |
Latest Reviews
View all
Bed Scarf
- Updated: 13.03.2023
- Read reviews
Androids With Good Cameras
- Updated: 01.04.2023
- Read reviews
Kennel For Pets
- Updated: 12.03.2023
- Read reviews
Coolest Apple Watch Apps
- Updated: 08.04.2023
- Read reviews
Pillow For Back Pains
- Updated: 14.06.2023
- Read reviews