9 best vinyl tile cutter home depot

Product description

For quick, quiet and clean installations of laminate and engineered wood flooring. Maximum cutting width: 13" (330mm). maximum cutting depth: 5/8 inch (16mm).



Heavy duty, aluminum and steel framework, with solid ABS work surface. Handle can be extended for additional leverage and easy cutting. Replaceable blade can be re-sharpened with included sharpening Stone.

• BONUS installation Kit and double-sided honing stone included! Designed to cut laminate, solid wood and engineered flooring up to 15mm (5/8"). will also cut vinyl tile and fiber cement siding such as hardy plank.
• Designed to cut laminate, vinyl, solid wood and engineered flooring up to 15mm (5/8"). will also cut fiber cement siding such as hardy plank
• Cuts up to 13” wide
• Angle gauge allows for cuts up to 45 degrees
• Quiet, dust free operation, No electricity required
• Heavy duty, aluminum and steel framework, with solid ABS work surface
• Handle can be extended for additional leverage and easy cutting

User questions & answers

Question:	Will this cutter work well on lp smart lap siding
Answer:	We have used this product for a month with our puppy and have been very satisfied. We’ve never tried to feed the unused water back into the water bottle on walks but in an effort to answer this question I tested the bottle to see if the unused water could be recycled. It worked. The water fed somewhat slowly back into the bottle, but it worked nonetheless.
Question:	will this cut at a 45 degree angle on a 7 inch laminate plank
Answer:	No
Question:	What is the difference between the 2100007 and the
Answer:	I'm not sure how it is applied, but mine began peeling off midway through the summer pool season.
Question:	What is the difference between the 2100007 and the
Answer:	I would go with your bras size and one size up. My daughter is 5.5, 127 lbs wear size 4, bras size 34B and this TYR size 36 fits her perfectly well. The fabric is not really stretchy, kind of snug at first but will feel a little bit loose after a few wash. Hope this helps. Other than that, it's a good swimsuit for her swim team.

Product features

The Right Product For Every Job

Whether you’re a professional contractor, heavy duty user, or do-it-yourselfer, rest assured Stay Sharp has the right tool for you. Designed with functionality in mind, Stay Sharp power tool accessories have all the bases covered. You’ll be surprised by the affordability of our Stay Sharp line and its superior performance. Each item is carefully engineered to surpass the competition in quality, performance, value, and durability.

Aligned with our commitment to sustainability, we invite you to return every used Stay Sharp product to your participating retail store, so it can be returned to our EAB for remanufacturing. We’re all about preserving energy, natural resources, and conserving our planet—one power tool accessory at a time.

1) Extendable Handle

The handle can be extended for additional leverage when cutting heavier/thicker materials.

2) Easy Blade Replacement

When the blade wears down, you can adjust it by disconnecting the screws in the bottom and rotating the 2 pads so that you get a dust free cutting every time. Once it's dull, you can also change your blade for a new one.

3) Dust Free Cutting

With some of the less expensive laminate flooring, you might occasionally get a some chipping along the edge. One way to reduce this is cut your laminate floors upside down.

4) Working With The Honing Stone

To work with the honing stone, all you have to do is lift the blade, set the stone (as in the photo) and slide it trough on both sides. This takes off any burr off the edge of the blade and removes any gum buildup from the adhesives that are part of the laminate flooring.

Product description

Cuts A Variety Of Material, Including Laminate Flooring, Fiber Cement Board (Hardieplank, Cemplank), Engineered Wood And Vinyl Siding Up To 13” Wide And 19/32” Thick. Compact And Easy To Use; Produces Clean, Precision Cuts With No Splintering And smooth Finish. Sturdy High-Quality Steel And Aluminum Construction, Extended Handle For Increased Leverage. Table Miter Gauge For Angled Cuts From 0˚ To 45˚And Includes 13” High Speed Steel Knife

• 13" cutting capacity
• Cuts a variety of material, including laminate flooring, fiber cement board (HardiePlank , Cemplank ), engineered wood and vinyl siding up to 13” wide and 19/32” thick
• Compact and easy to use; produces clean, precision cuts with no splintering and smooth finish
• Sturdy high-quality steel and aluminum construction
• Extended handle for increased leverage

User questions & answers

Question:	Will this cut 15mm wood floors
Answer:	No. The blade is not strong enough for 3/4” hard wood.
Question:	My vynal laminate flooring is 8mm thick. Will this go through
Answer:	Absolutely. This laminate cutter will have no problem cutting 8mm Vynal. Thanks for the question!
Question:	Anybody try cutting garage floor tiles such as racedeck 12'x12'x.5" or similar? they are pvc
Answer:	We bought this to do Luxury Vinyl tiles they were 7x48" and a 20mil thickness... I know this isnt the same material your using but, this cutter was awesome! Highly recommend it, saved a lot of time being able to keep right next to us.
Question:	Does this work very well? I used to use a miter saw for my floor i put down as i already had it. But was annoying for dusk etc
Answer:	This thing works great on thicker Engineered Vinyl Plank flooring. No mess, does not dull chop saw blade. Most important it’s quiet so you can work at night while kids sleep

Product features

Your Dustless Cutting Solution for Laminate & Fiber Cement

It's light and portable.The Norske siding and laminate cutter weighs only 13 lbs.

Steel and Aluminum Construction

The Norske Siding and Laminate Cutter is constructed from high-quality steel and aluminum

Increased Leverage

Our extended handle increases leverage to reduce effort and improve productivity.

High Speed Steel

- Clean & precise cuts with no splintering and smooth finish.

- Includes 13” high speed steel blade.

- 4000 to 5000 Cuts.

Angled cuts

- Table miter gauge for angled cuts.

- Adjustable from 0˚ to 45˚.

Dustless & Quiet

- Dustless.

- Quiet.

- No Electricity.

Product description

Crescent Wises has taken the aviation snip to the next level with the advanced metal Master aviation snips. The precision cast molybdenum blades have conk ground Serrations which allow for more uniform Serrations that provide a cleaner cut every time. They feature extended pivot bolt life due to the superior free float design. The spring action design allows for fast, effortless feed. The all new latch design provides ergonomic single handed operation for left or right handed users. New extended non slip handle grips give users better control while cutting. The new generation of Crescent Wises metal Master will cut over 8 miles of steel and feature up to 10 times longer cut life than traditional aviation snips. They are available in left/straight cut, Right/straight cut, and straight cut.

From the Manufacturer

Wiss compound action snip with serrated blades to grab hold and aggressively cut through material, compound action to multiply the hand's force by five times and a self-opening spring action for a smooth low effort feed. The industry standard - the professional’s choice.

• Cuts straight and slight curves with yellow handles for quick identification
• Precision cast molybdenum blades with conk ground edges and serrations for cutting low carbon, cold rolled 18 gauge steel
• Blade serrations spread cutting force across jaws improving cut quality and tool life
• Superior Design prevents tears at end of cuts by controlling blade bypass and minimizes folding and burrs
• Ergonomic, single handed latch operation for left or right handed use
• Free float design on the pivot bolt provides longer life
• Spring action for fast, effortless feed

User questions & answers

Question:	Would these be good for cutting the rusted metal off of autos, or should I be looking for a different type/angled cutters
Answer:	Did not really understand the question. This cutter works nicely and I am happy I bought it. Don't know anything about 3 piece or made USA.
Question:	Dear Seller!! Wiss M3R, It's includes 3 piece and made USA?! let me know, please! Thanks
Answer:	The packaging in the image appears to indicate that it'll cut 18-gauge.
Question:	Will this shear able to cut precious metal sheets up to 20 gauges and thinner?? I am a jeweler designer and using saw is pain in the neck and time con
Answer:	These snips will cut a penny. Hold the coin with a pair of slip-joint pliers as it has a tendency to twist. That made things much easier.
Question:	will this cut a penny in half
Answer:	this is only tightener, both ends of straps are getting in, this tool is making need tension between both ends. It is not cutting, it is not binding at all. For binding you need clamps and clamping tool.

Product features

Next Generation Aviation Snips

Snips made to earn the trust of a new generation. Continuous improvement means never being satisfied. That’s why these new Next Generation snips last 60% longer and require 20% less force to cut on average compared to our snips from just five years ago.

• Precision cast molybdenum blades with CNC-ground edges and serrations for cutting low carbon, cold-rolled 18 gauge steel
• Blade serrations spread cutting force across jaws improving cut quality and tool life
• Superior design prevents tears at end of cuts by controlling blade bypass and minimizes folding and burrs
• Ergonomic, single-handed latch operation for left or right handed use
• Free float design on the pivot bolt provides longer life
• Spring-action for fast, effortless feed
• Handles have built-in stops providing consistent operation and blade opening
• Ergonomic, single material non-slip handle grips provide excellent control and easy cleaning with built-in hang hole for convenient storage
• Designed, Engineered, and Manufactured in the USA

Product description

✔ Grout-eez tile cleaner is a heavy duty professional strength grout cleaner that will easily remove grease, dirt and stains from ceramic, porcelain and subway tile:You will receive a FREE grout brush when you purchase 2 bottles of Grout-eez; Why get on your hands and knees to clean your grout when you can do it easily while standing up

• ✔️ We’re here to make your life easier! Imagine if you no longer had to get down on your hands and knees to clean your tile and grout. How would it feel to have less stress when you are cleaning your floors? What would it mean to you if you could save a lot of money? With our products you can have all of that.
• ✔️ Used by Professionals: Grout-eez tile and grout cleaner, will remove grease, dirt and stains from ceramic, and porcelain tile and grout. It is a Heavy duty professional strength product. There are 3 reasons: Why Professionals love Grout-eez 1. Easy to use. 2. Fast to use. 3. The most important one is it WORKS!! GrROUT-EEZ IS NOT TO BE USED ON NATURAL STONE!
• ✔️ No more Bending down on your hands and knees: Our grout brush connects to any standard broom pole you have around the house. With our 1 of kind grout brush it is beveled and V shaped to make it easy to fit in grout lines, making it easy to remove grease and dirt. Making your life much easier.
• ✔️ Goes Far: With an easy pouring spout Grout-eez goes far, 1 Bottle of Grout-eez will clean approximately 250 sq feet of tile and grout. Our 2 Bottle of Grout-eez will cover approximately 500 sq ft of tile and grout.
• ✔️ Saves you Hundreds of dollars: Grout-eez is the easiest and Best grout cleaner on the market today Guaranteed! By using our Grout-eez cleaner you won’t have to pay a professional to do it.

User questions & answers

Question:	Worried this product left white film patches on my tile floors, How can I fix this problem
Answer:	Good Morning, we do not recommend to use this full strength. i have attached a copy of the link for the product data sheet for instructions on how to use. , mix one part Tile & Stone Cleaner with 3 parts hot water (cold water can be used but cleaning action will be reduced). Apply Tile & Stone Cleaner with a clean mop or self-feeding floor machine. Allow the solution to stand for 10 minutes while agitating periodically with the appropriate scrub brush. For example 16 oz water to 1 oz cleaner. https://miraclesealants.com/pds/Tile%20Stone%20Cleaner_PDS_08.12.16.pdf
Question:	Will this product work with the white grout around the white marble tile ? do i need to cover or to protect the marble since it is a real stone
Answer:	It does not require rinsing, and I have not found it to leave a shine on my floors. My floors are travertine, and they have a satin finish on them.
Question:	mop up or wipe with wet cloth
Answer:	The Tile & Stone Cleaner will not remove the sealer from the surface, If you have any questions please let us know. Thank you Miracle Sealants Technical Support team.
Question:	Can this be used with a tile cleaning machine, or will it be too harsh
Answer:	Good Afternoon. This product will not remove hard water build up. Can you call direct to determine what type of stone you have so that we can recommend you the proper cleaner to remove hard water and soap scum . 1 800 350-1901 ext. 1 Monday – Friday 7:00am – 5:00pm PST

Product description

Ron Meyer and Si Kraft established Kraft Tool Co. in 1981. Quality is a mainstay in our business. In order to supply our customers the best products, we have strict quality control while sourcing material globally to use in our manufacturing facilities in Shawnee, Kansas; Neodesha, Kansas; and Sharon Hill, Pennsylvania. Over our 37 years we’ve grown from a small building to a sprawling manufacturing and warehouse facility. Our brands have been making products since 1798 with W. Rose masonry tools, Superior Tile Cutter since 1938, and Sands Level & Tools since 1895, and Gator Tools since 2008. Thank you for supporting Kraft Tool Co. As always, our guarantee of providing you the highest quality tools and service is our most important job.

• Country Of Origin: United States
• Model Number: ST004
• Item Package Dimension: 9.0" L x 6.0" W x 0.375" H
• Item Package Weight: 1.0 lb

User questions & answers

Question:	where can i get replacement pads for the Superior Tile Cutter
Answer:	We carry all superior replacement parts.
Question:	Is the rib/ridge on base (what the tile gets snapped against) supposed to go all the way to the fence? Mine stops short about almost 1/4". Thanks
Answer:	We have this and works great goes all the way to the end . Lift up and score and snap. My husbands been doing tkle 20 years in tx. And superiors real popular here. I just bougjt him this for christmas works great so far.
Question:	Where can i get replacement cutter wheels
Answer:	I don'tknow I gues from a tile showroom or Amazon.
Question:	I need to cut 3/8" marble tile, both 1/2" x 1/2" and 1/2" x 2" tiles. Will this cutter work for me
Answer:	Marble is pretty fragile. The only board that will is a sigma. I own one and I can say top of the line. I own 2 superior and 1 sigma all for different use

• High-strength fiberglass handle mallet with non-slip rubber grip help absorb vibration. Double-faced solid rubber head delivers a softened, positive strike. The mallet head is 35 mm in diameter(other brands usually is 25mm).No any issue about the head of mallet fell apart and handle bent
• Upgraded pull bar is more longger and thicker than others.Others are usually only 3 mm thick, 10.5 inch long and easily deformed.Ours is 4mm thick, 12 inch long is heavy duty
• Suitable for 0.27in (7mm) - 0.6in (15mm) laminate or hardwood flooring
• REXBETI flooring installation kit have 40 spacers, more than other brands.Let you install your laminate wood flooring more convenient and easier
• Package included 1 x rubber hammer; 1 x pull bar; 1 x tapping block; 40 x spacers

User questions & answers

Question:	How is the quality
Answer:	It's the best I've had so far.Heavy duty mallet,the handle is fiberglass. When I concentrate on installing my floor, the mallet head doesn't suddenly fly apart
Question:	Where this is product made
Answer:	Unfortunately made in China, if I had been paying attention I would have looked for a truly American made product.
Question:	How do I use the spacers if I need 3/8”? The spacers are nowhere near that size
Answer:	They are tapered, just put two together and adjust to any width.
Question:	Is this kit good for vinyl plank flooring
Answer:	Sort of.. If you have a thick vinyl plank, the hammer 🔨 will wear out fast. The tapping block is useless, it’s basically thin plastic box. I could go on but you get the picture. It’s really for a small project.

Product description

The QEP 20 in. Ceramic and Porcelain Tile Cutter cuts a variety of wall and floor tiles. The solid, chrome-plated steel rails offer smooth scoring, while the welded center breaker beam and level foam side pads provide clean cuts and a level surface. This cutter also includes an adjustable rip guide designed to help make repetitive cuts in tile faster and easier.

• Cuts wall and floor tiles up to 20 in. long, 14 in. diagonally, 1/2 in. thick
• Linear ball bearing slides provide smooth scoring and repeat cuts
• Heavy duty rubber pads prevent tiles from shifting
• Dual chrome-plated steel rails with bumpers for comfortable scoring
• Rubber padded aluminum alloy breaker bar will not mar tile

User questions & answers

Question:	Is this a good product to cutbany size tile
Answer:	very Bad
Question:	Can it cut small 2x2 mexican hand painted tiles? the tile cutter from home depot scares me as my fingers get awfully close to the blade
Answer:	Yes. It can cut them, but 2 inches wide would be tricky for such a large cutter. This one is best for large tiles. I tried with 3-inch tiles and it was difficult.
Question:	Can this be used for cutting laminate floors
Answer:	very bad
Question:	Can this cut 12x24 ceramic tiles
Answer:	I don't know. Mine were 16" tiles.

Product description

This Laminate Cutter is built with a heavy duty steel frame that is great for cutting Laminate up to 8-Inch wide and 12mm thick.

• Cuts laminate up to 8-Inch wide and 10mm thick
• Heavy duty steel frame for maximum stability
• Positionable-InchV-Inch support keeps planks level while cutting

User questions & answers

Question:	Will it cut LVT
Answer:	http://www.birdchannel.com/bird-behavior-and-training/bird-training/bird-water-bottle-training.aspx
Question:	Do you have to sharpen the blade before you use the cutter
Answer:	I don't know if it fits the bicycle frame. But it is very suitable for carrying
Question:	Could this be used to cut .197-inch thick resilient vinyl plank flooring
Answer:	It should.
Question:	Will this cut 12 inches pergo laminate planks
Answer:	Hi, there! Thank you for your question. Yes, it is safe. This portable dog water bottle is made of HDPE material, the water bowl is made of food grade silicone; BPA Free, no smell, environmentally friendly and recyclable. Please don't worry about this problem. Hope this help you. Thank you. If any other questions, please contact us at any time.

Product description

Product IntroductionDifferent from traditional tiles, these Peel & Stick Tile make from soft vinyl (exterior film) and natural plant fiber (interior film), eco-friendly and fireproof. Installation is simple, use a ruler and utility knife can easily cut it to fit the size of your wall, then follow the steps to apply them. No special tools required, no mess and no grouts, easy do it by yourself! Utilize Art3d tiles for your next home DIY project - the design opportunities are only limited by your imagination!!



Product Features





Quickly Installed Without Any Mess or Specialized Tools

Light weight, easy to cut and easy wipe to remove the stains



Esepecially Designed for Kitchen and Shower

Resistant to heat of stovetops and humidity of shower



High Quality and Eco-friendly Materials

Made of non-toxic materials



Guaranteed to Stick to Your Walls

No extra glue, will never yellow or crack over time



Save Your Time and Money

Tiling in a few minutes & No labor costs, easy do it by yourself



What need we pay more attention?

Not real tiles, this tile is lightweight but realistic. If you don’t know whether it fits your wall, please buy one first to check it

Art3d tile can be applied to rough surfaces, such as textured walls, cement walls, it is best to use sandpaper to polish the surfaces before installation

The back glue is strong, once you stick it on surfaces, it won't be easy to peel it off, Please measure the wall first to ensure perfect alignment



How to use Art3d tiles

①Clean up the walls and ensure dryness

②Measure the wall and then cut the tile to fit it

③Peel and stick, splicing Art3d tiles

• 10 Sheets premium self-adhesive tiles, 12" X 12" each
• Upgraded strong back glue, especially designed for kitchen, shower and fireplace
• Some non-raised surface, such as cement wall, plywood wall, gypsum wall, textured walls can be applied
• Thickened top gel giving a better 3-dimensional effect than normal peel & stick tile
• Just peel and stick, no grout, no glue, no special tools and no mess

User questions & answers

Question:	Can this be applied on top of wallpaper
Answer:	That happened to me once. The top is probably not on right. Readjust the top and tilt the bottle forward while pressing the button and the water should come right out. It’s a little slow but it works great.
Question:	I want to put this in a Motorhome will it stick to the textured walls
Answer:	I’m not sure but mine leaked from the beginning.
Question:	What about edge? Any products we can use to cover the uneven cut edge
Answer:	No, perhaps for water on a trip maybe....but not in place of a water bowl. I actually use it for chickens. Big dogs takebig laps of water. Maybe a puppy....or a dog weighing 5 lbs or less.
Question:	Does this have a raised texture to touch or is it flat like wallpaper
Answer:	Ours comes with a bungee spring with two clasps to hold to the dogs cage

Product features

Art3d Peel and Stick Tile Backsplash

Art3d peel and stick tiles are smart and unique products that will simplify your life. The tiles can be easily installed directly over existing panels or smooth surface. Especially designed for kitchen backsplashes and bathroom backsplashes, the tiles are resistant to the heat of stovetops and the humidity of bathrooms.

About Art3d

Art3d is a leading designer and manufacturer of decorative wall tiles, we focus on developing state of art products in both residential and commercial level. We produce a various collections of peel and stick wall tiles including embossed subway designs, marble designs, long gang glass designs and a variety of brick designs.

Surface Requirement

​The tile need to be installed over clean and sleek surface. Please note that rough surfaces such as porous wood, embossed ceramic tiles or textured wallpaper are not suitable to install; NOT all the latex/repainted walls can be installed directly, for latex or repainted wall, the 3M Spray Adhesive is recommended.

Tiles should not directly contact with flames, steam or submerse in water. Do not install tiles less than 16 inches away from the top of stove.

If you want to remove the tile, you could use a hair dryer to warm up the adhesive and pull softly starting with the corners.Then use a cleaning product to remove the excess glue left by the peel and stick tiles