11 best deer feeder lids

Product description

American Hunter AH-L55 Easy open lids for 55 Gallon Feeders, This lid solves two old problems, 1 Eliminates water standing on the top of the lid, 2 Makes it east to open while it holds itself on the side of the feeder when filling

• Includes Easy Open Lid
• Eliminates water standing
• Easy to Open
• Holds itself on the side of the feeder

User questions & answers

Question:	Is it heavy enough to use on my 55 deep pit bar-b-que barrel? Buried underground for cooking
Answer:	This lid is very heavy gauge, the heaviest I have ever found and I have 2 other brands that are not nearly as heavy. The galvanizing is heavy as well. They will fit both metal and plastic 55 gallon barrels so I would think it would fit your pit, assuming you are putting it on the open top of the barrel. Good luck
Question:	I have a standard metal 55 gallon drum feeder hanging from a bail that is a close fit, how close is this on a metal drum
Answer:	Very close. That is why we used it. Tight to keep water out!
Question:	What is the inside diameter of these lids? Thanks
Answer:	I haven't measured but mine fit perfectly over a 55 gallon barrel.
Question:	what is it made of? galvanized? thanks
Answer:	Galvanized steel. .090 thick. Well made

Product description

Designed with quality construction to last years in the field. Sizes available include: 30 Gallon, 55 Gallon and 85 Gallon. Feeder Lid with 2 Inch Lip, Galvanized steel. Add this to any of your DIY feeders for years of use, 1 year manufacturer warranty.

• Official Gear of Elusive Wildlife, Creators of the Kill Light
• 2 inch lip, Galvanized Steel construction
• The perfect addition for a new DIY feeder build or upgrade your current set up for years of use
• As seen on Elusive Wildlife Television

User questions & answers

Question:	Will this fit the Moultrie 30 gallon feeder
Answer:	The internal dimensions for the lid is just at 19.5". I'm unsure what size fits that specific feeder and it looks like they have a couple 30 gallon models, both plastic and metal. I would confirm the measurements of your feeder before purchasing.
Question:	Why is there not a 30 gallon lid selection
Answer:	we were out of stock of that item, however we've now received those and have them available
Question:	Is this a set of three
Answer:	Hello, this is for a single unit. The image is displaying the size options for 30, 55, and 85 gallon drums. Elusive Wildlife Technologies

Product description

Boss buck Galvanized 55 gallon feeder Funnels are perfect for building your own drum feeders or refurbishing an old feeder. The OD of the funnels is 22.375" and it is 7.75" Tall. It has a 2" diam. Nozzle that is 1.5" long. Galvanized 20ga. Steel construction prevents rusting.

• Galvanized Feeder Funnel
• Fits most 55 gallon barrels
• Purges feed completely from feeders
• Built in 2" diameter down spout

User questions & answers

Question:	what is the diameter from edge to edge
Answer:	Roughly 22 3/8” It fits perfectly down a 55 gal drum no screws or anything just put it in snd funnel goes out hole in hitting of drum so it’s important hole be center in bottom

• Easy 15 minute set up
• Durable 30 gal/225 pounds poly barrel design
• Weaver-style rail
• Galvanized steel spinner plate
• Newly designed digital power control unit

User questions & answers

Question:	is this item durable
Answer:	I have had raccoons eat wholes in the top of the bag if I’m not carful to make sure all the corn has gone down the shoot.
Question:	or 12 volt
Answer:	Yes, Sir! The Pro Hunter II kit comes with both the quick lock attachment and the quick-lock adapter for non-quick lock hoppers, so it will work with any Moultrie-made hopper.
Question:	does it come with a battery and charger
Answer:	Not for Bird seen at all. The seeds wout run right out. Corn only as it is bigger.
Question:	What is the housing made of plastic or metal
Answer:	Dimensions are 6.9 x 6.9 x 12.25 inches

Product features

Wildgame Innovations Tri-Pod Deer Feeder

Spend your time patterning your local game population, not pulling your hair out over a complicated assembly manual. True to its name, the Quick-Set 225 only requires about 15 minutes of setup before it's fully operational and ready to bring game your way. The dependable entry-level poly barrel feeder provides above-average results. It's a manageable weight – about 37 pounds – and holds up to 225 pounds of feed.The Quick-Set 225 comes standard with an easy-to-use timer with up to four daily feed times lasting 5, 10, 15 or 20 seconds – depending on your preference. The feeder also accepts corn or protein pellets, so you can choose your feed based on what your hungry game will like best.

• Easily attract and pattern game
• Durable poly barrel design
• Built-in funnel for accurate feed dispersal
• Heavy-duty coated legs (12-piece kit)
• Galvanized steel spinner plate
• Durable weather-resistant housing
• 6V power unit (battery not included)

Product description

No moving parts...nothing to break down. - With no moving parts and no batteries to replace, the On Time Buckeye Gravity Feeder is the easiest way to keep whitetails and other wildlife on your property. UV-resistant hopper is made from durable polyethylene and features a "no waste" internal cone that ensures no seeds get left behind. Three metal 2" legs provide excellent stability and double as the feed delivery system. 200-lb. feed capacity; UV-resistant polyethylene hopper; 3 feeding stations for easy feeding; "No Waste" internal cone ensures all feed is dispensed; 2" steel legs provide stability and double as the feed delivery system; Removable lid for easy filling; Feeder sits about 1.5' off the ground; Construction: 100% polyethylene hopper/100% steel legs; Feed Capacity: 200 lbs.; Mfg. Number: 71540; Order today! On Time Buckeye Gravity Feeder, 200 lb. Capacity

• On Time Game Feeder
• Buckeye Gravity 200# Tripod
• 200#
• Black

User questions & answers

Question:	Can you get it with longer legs
Answer:	If it was any taller I don't think the deer we have around here could reach the corn
Question:	does the rain clog it up when using protien
Answer:	Mine clogged last time but the deer have gotten so used to it they unclog it themselves. Then it’s funny they run because the corn bursts out and go back to eating.
Question:	Ihave alot of racoons. Are the trays high enough off the ground to help keep them out
Answer:	Not at all, coons will have a field day with this one and in the winter , if you leave the feeder out , when it gets empty the squirrels will chew holes in the feeder. I really like the design, easy to fill, but if you have coons may not be a good choice as they have easy access to the feed at such a low height to the ground
Question:	how well does this feeder work for feeding Deer whole Corn
Answer:	This feeder is fantastic if you don’t care when the deer eat. It will feed corn and protein pellets with no issues. Even perfect for turkeys to eat out of. Only negative as opposed to a spin feeder is the animals can eat all night. Not programmable. Simple and easy to use and move around on your property.

Product description

All metal bail attaches easily to a 55 gallon barrel to use with a tripod or winch feeder setup. Comes with our 1,000 LB pulley. Painted and sealed to prevent rust. Comes complete with mounting hardware. Dimensions: 22 1/16" I.D. x 17 13/16" Tall.

• Heavy Steel Construction
• Includes a 1000lb. Pulley
• Powder Coat Finish
• Fits 55 Gallon Drums

User questions & answers

Question:	So drill a hole in the drum, insert bolt, washer and nuts on inside? No problem leaks in bolt holes
Answer:	I’ve had my feeder up for over a year and have not spotted any leaks or corn effected by water. If you’re concerned of possible water entry add a rubber washer to the bolt head.
Question:	what is weight limit on product
Answer:	It is designed for a 55 gal barrel filled with corn. That's about 300 lb total weight with a feeder motor.
Question:	One review said it won’t work with a fixed lid and locking ring... why is that
Answer:	The tolerance between the support, and the barrel lid is too close to allow you to spread the ring enough to get it to open. Unless you plan to tip the barrel all the way to the side, you can't get it open with the stock lockring. The plastic covers by Moultrie and other brands, work perfectly with no issues. This thing is strong. Been hanging since July at my lease with zero issues.
Question:	Does fit 30 gallons drum
Answer:	It will be to wide for 30 gal. Mine will not not fit 55 gal barrel like it should'

Product description

For the past quarter century, Boss Buck and American Hunter has been dedicated to the development & production of the most innovative game feeder systems on the market. feeders are designed to fulfill requirements of everyone involved with wildlife—the wildlife hobbyist to the most experienced professional game managers. Boss Buck and American Hunter Feeders are longest lasting most flexible feeding systems available. We offer a complete line of deer feeders, deer stands, deer blinds and deer feeder parts. Boss Buck is the manufacturer of the cutting edge line of patented Non-Typical Wildlife Feeders and Comfort Zone Hunting Blinds. The most durable, light-weight, high feed capacity, versatile deer feeders available today. Convertible from gravity feed to automatic deer feeders in just minutes. These are truly the most affordable, high end, deer feeders available on the market! Our Comfort Zone Hunting Blinds are maintenance free, portable and super easy to assemble. We also offer an unparalleled line of deer feeder parts for 55 gallon style feeders – from lids to funnels, timers and much more!

• Holds up to 400 lbs. per set of 3 adapters
• Complete with back plate and bolts
• Set of 3 -7/8” square tube legs
• Bent to proper angle for mounting 8’ legs to a 55 gallon drum
• Durable and long lasting
• Includes legs, back plates, and bolts
• Squre tube Legs
• Holds up to 400 lbs. per set of 3 adapters

User questions & answers

Question:	Do these come with feet or would i have yo use a board on the bottom
Answer:	They do not come with feet. I used 1 1/4" black steel pipe for legs and drove T post down in the ground for support from hogs tumping over the feeder.
Question:	Do you have the extentions to raise feeder up that are straight pieces
Answer:	You are looking for a leg kit. I personally go to the hardware store and buy 15’ sections of top rail for chain link fence and cut them in half. Or you can use the larger chain link 8’ post. Depends how high you want the feeder to be.
Question:	How many degrees is the angle on these
Answer:	Less than 45. Cannot measure as all feeders at deer lease. Very strong. Worth every penny.
Question:	how long are the legs
Answer:	These are only adapters that you bolt to your container. You will have to buy some pipe or tubing with at least 1 inch inside diameter to make the legs. I used 3 each 7 Ft. pieces of pipe to put the bottom of my barrel at about eye level, with the adapters bolted to the center of a 55 gal. drum.

Product description

Built strong to last long, this durable feeder from Moultrie’s premium Pro Magnum line is backed by a lifetime warranty. Enjoy superb protection against even the most determined pests with all metal parts, including a varmint guard that prevents birds, squirrels and raccoons from raiding your feeder. Now with new square legs that enhance its stability and a belly band designed for easy assembly, this feeder also features a metal spin plate with raised edges, to protect feed from the wind. A dual-battery compartment can hold an extra 6-volt spare while a built-in battery indicator lets you know when they need changing.

• Digital timer programs up to 6 feed times a day, 1 to 20 seconds each
• All-metal housing, barrel, spin plate, varmint guard and funnel
• Built-in feed-level estimator, battery indicator, external power port and solar panel connectors (solar panel sold separately)
• Backed by a lifetime warranty
• One 6-volt battery required, two for extended field life
• All-metal feeder kit with built-in metal funnel
• Easy-to-program LCD timer saves time and eliminates frustration
• Metal constructed barrel has 200 lb. capacity, approx. 4 months worth of feeding

User questions & answers

Question:	I already have the feeder and just want to buy the tripod to mount it on. Is it possible just to purchase the tripod separately
Answer:	It does not. In fact one of the gravity feeder heads only lasted a week before the critters chewed the lip off of it causing feed to spill every where.
Question:	will it work with wet cob
Answer:	Not sure, but don't waste your money. It works for 1st frame or so them gets all mucked up. It's a pain. Went back to knife.
Question:	Does it include feet and stakes
Answer:	yes, it is easy to clean
Question:	How tall is this unit when set up
Answer:	The upper mesh is approximately 1,875 microns, and the lower mesh is 650 microns

Product features

Moultrie 30-Gallon Pro Magnum Tripod Feeder

Built like a tank, the Moultrie Pro Magnum series of feeders were created to stand up to harsh conditions and hard use. With a steel hopper and industrial-grade electric motor, a Pro Magnum is a long-term commitment between feeder and owner that we seal with a lifetime warranty.

Feeder Compacity

The 30-gallon Pro Magnum has a 200-pound capacity and an all-metal tripod that is more than capable of supporting the load. The included Pro Magnum Feeder Kit has a programmable timer that allows up to six daily feed times, each with an adjustable duration of 1-20 seconds.

Power Options

Battery level indicator and Feed Level Estimator help cut out the guesswork of knowing when to replace batteries or fill the hopper. The Pro Magnum series operate on one 6-volt battery, but a second battery can be added for longer field life. An external power port for optional Moultrie solar power sources can eliminate the need to replace batteries altogether.

Spinner Plate

You could make a good case that the spinner plate is the most critical component in feeder performance. It may look simple, but a lot of thought went into the design of our metal spinner plate. It needed some type of barrier against the wind, but that barrier couldn’t impede the flow of feed. The solution is a galvanized metal design that blocks the wind, yet maintains its slick surface over years of use for cake-free operation.

Overbuilt construction

There’s a lot of reasons for the popularity of Pro Magnum feeders, one of the biggest is their indestructible build quality. Neither varmints nor weather are up to the task. The hopper is metal with a protective finish on the inside to better resist rust. Pro Magnum Feeder Kits have all-metal housings for equally tough performance. Add to that square profile metal legs with locking lugs, and it becomes apparent why the Pro Magnum series of feeders have their reputation for longevity in the field.

No varmints allowed, ever

Pro Magnum feeders feature all-metal hoppers that no varmint, no matter how tenacious, can chew through. There’s also a steel collar that tightens down on the lid just to ensure the smarter ones can’t get in. As if that wasn’t enough, we also included a varmint guard to the feeder kit, then added a tall metal tripod to mount it all on.

Programmable digital timer

Control how much feed you want to cast and when you want to cast it. Programmable digital timer allows up to six daily feed times. The duration of each feed time can also be set from 1 to 20 seconds.

External power port

Anything that can reduce battery replacement trips is a significant benefit for a feeder. The Pro Magnum Feeder kit includes an external power port that accepts the 6-Volt Deluxe Solar Panel or Feeder Power Panel. You can use either to recharge the 6-volt battery that’s required to power the feeder. The Feeder Power Panel can also be used as the only power source.

Fewer trips, less downtime

You can better plan your routine trips to the feeder if you have a better idea of when you will need to make those trips. This Moultrie feeder has a battery level indicator and Feed Level Estimator to help prevent downtime and needless travel.

Product description

These 200# protein deer feeders are the best! This maintenance free patented hopper design gives you the flexibility to gravity feed protein in the spring & summer and converts over to an automatic feeding system in the fall and winter months. The custom designed head features a 10A degree angle, and a 1" Overhang on the 4" I.D. Feed ports. Each feed Port has a drain hole to disperse any water that enters the tip of the feed Port. Feeder ports are 34" From the ground. Our patented design features an internal Cone that dispenses the feed evenly to the three ports. The 3-way inner sleeve allows the user to control the feed flow of almost all feed shapes and sizes. Push it all the way up to virtually shut off The flow, or ease It down until you get the optimal flow on your favorite type of critter food. This is the most user friendly, versatile wildlife feeder system on the market today. Our double walled hatch lid tops this unit off in style, and function. It allows the hopper system to breathe thus eliminating condensation while achieving ambient Temperature faster than steel or fiberglass feeders. These feeders are great for remote location feeding where access is limited to ATV's and foot access only. Deploy the Boss Buck 200 feeders in those out of the way honey holes for excellent results! Notice: using salt based feed materials/blends through a Boss Buck control system will VOID the parts warranty! Salt based mineral supplements, such as Big tine 30-06 mineral blend, will corrode and rust Your feeder control box more rapidly than using corn, protein or other non-salt based feeds. Important notice: we highly recommend you use foot pads on all Boss Buck feeders to protect them from sinking into the ground.

• Converts from gravity to auto in seconds
• Unparalleled Boss Buck quality
• 200lb corn capacity
• Two-in-one leg system for quick conversion
• Tough roto-molded plastic

User questions & answers

Question:	Are these the square heavy duty legs or the round black legs
Answer:	Absolutely! the frame components slide, the side bars are expandable to fit any Foodsafe! bucket up to 5 gallons
Question:	How many leg sections come with this feeder? It seems I’m missing a few leg sections
Answer:	The filter is in 2 parts. Top, flat-bottomed filter is the coarser filter. The lower filter is round-bottomed and of a very fine mesh. To clean the filters, separate them and wash them under cold, running tap water. Don't use hot water, as it will melt the wax and make it impossible to get the filters clean. The filters clean up easily with no sticky mess left
Question:	How do you get this with the galvanized legs
Answer:	Yes. The working area of the honeycomb is approximately 17.75x10. We have a Boss laser with a 15x30 bed. We use the smaller honeycomb when we work with acrylic to avoid smoke stains from residue on the larger bed
Question:	Does this come with both gravity and electric feeder heads
Answer:	Hello there, 6 months' warranty for the machines, not artificially damaged. We stand behind our products all the item, so even if your warranty period has expired, you can still seek for service or technical support from us with low cost. Any issues just feel free to contact us. We'll surely help you. Regards

Product features

Boss Buck All in Series Protein Deer Feeders

This maintenance free Hopper design gives you the flexibility to Gravity feed protein in the Spring & Summer and converts over to an Automatic feeding system in the Fall and Winter months.

The Custom Designed head features a 10° angle, and a 1″ overhang on the 4″ I.D. feed ports. Each feed port has a drain hole to disperse any water that enters the tip of the feed port. Our design features an internal cone that dispenses the feed evenly to the three ports. The 3-Way inner sleeve allows the user to control the feed flow of almost all feed shapes and sizes. Push it all the way up to virtually shut off the flow, or ease it down until you get the optimal flow on your favorite type of critter food.

This is user friendly, versatile Wildlife feeder system. Our double walled hatch lid tops this unit off in style, and function. It allows the hopper system to breathe thus eliminating condensation while achieving ambient temperature faster. These feeders are for remote location feeding where access is limited to ATV’s and foot access only.

Features:

• Tough Roto-Molded Plastic
• Converts from Gravity to Auto in Seconds
• One Piece, Round, Galvanized Leg System
• Unparalleled Boss Buck Quality
• 200lb. Corn Capacity

Product description

The Quick Set 50 features a 30 ft./360 degree range. It comes with a durable 6.5 gallon/50 lb. hanging pail and plastic photocell control unit. With dawn and dusk available feed times, galvanized spinner plate and 6V battery operation, battery not included.

• Better products, better hunt
• Compact, easy to carry
• Designed to increase your chances of a successful hunt
• Durable 6.5 gal/50 lb. pail
• Hanging pail design
• Dawn and dusk available feed times
• Galvanized steel spinner plate
• Real tree extra camo barrel

User questions & answers

Question:	Is it an electronic timer? Can you set a release time as well as number of seconds to release corn? What kind of battery is used? Thanks
Answer:	The barrel is plastic.
Question:	Do you sell batter for this feeder
Answer:	Yes it will adjust to a big tree.
Question:	Whats the best battery to buy with this feeder
Answer:	I don’t know about that. It did take a little longer than expected to get ours.
Question:	Does this feeder have a cone shape on the inside to prevent grain from being trapped on the edges
Answer:	We too had trouble with one of our four. I ripped it apart and finagled my own parts.

Product features

Wildgame Innovations Pail Feeder, Real Tree Camo Steel

The Quick-Set 50 is the smallest of the Quick-Set family. But don’t be fooled by this feeder’s size; what it lacks in stature it makes up for with a mighty ability to attract and pattern game. The pail design streamlines setup and operation so you spend less time tinkering in the field and more time studying game activity. Just 5 minutes after you take it out of the box, the Quick-Set 50 is ready to get to work. Set the user-friendly timer to distribute feed up to 30 feet during dawn or dusk when game is most likely on the move.Many hunters appreciate pail feeders for their mobility, and the Quick-Set 50 is no different. From the first setup to the one-hundredth (and everything between), this feeder stays true to its quick-setting name.

• Hanging pail design
• Feed during peak activity at dawn or dusk
• Galvanized steel spinner plate
• Easily mobile so you can find the right spot
• Realtree Xtra camo pail

Product description

Built strong to last long, this durable feeder from Moultrie’s premium Pro Magnum line is backed by a lifetime warranty. Enjoy superb protection against even the most determined pests with all metal parts, including a varmint guard that prevents birds, squirrels and raccoons from raiding your feeder. Designed to hang easily from any rope, chain or cable, this feeder also features a metal spin plate with raised edges, to protect feed from the wind. A dual-battery compartment can hold an extra 6-volt spare while a built-in battery indicator lets you know when they need changing.

• Digital timer programs up to 6 feed times a day, 1 to 20 seconds each
• All-metal housing, barrel, spin plate, and varmint guard
• Built-in feed-level estimator, battery indicator, external power port and solar panel connectors (solar panel sold separately)
• Backed by a lifetime warranty
• One 6-volt battery required, two for extended field life
• Metal spin plate raised edges protect feed from wind
• Dual-battery compartment can hold two 6-volt batteries for extended field life
• Programmable digital timer, schedule up to 6 feedings a day

User questions & answers

Question:	Is it possible to direct the feed to just one area, so we can feed fish from the dock
Answer:	No, the spinner dispenses 360 degrees. If you blocked part of the feeder, the feed would build up and clog.
Question:	Will this work with feed such as alfalfa pellets
Answer:	Will depend on the size of the pellets. If it fits thru the hole/slot it will work
Question:	Is this a variable-speed timer
Answer:	variable speed timer,... ya can set it to throw corn for,.... 4 seconds to 10 or 12 seconds. 4 seconds throws out roughly 1 lb of corn. Hope this helps ya out! Rest assured ya can also make this time set to feed from 1 time a day up to 6 times a day I believe it is. I'd go check with eyes on for ya,.. but my feeder is about 2 hours away out on my land.
Question:	What type of battery does this need? Prongs that compress?? Plug 6v with plug ins
Answer:	Newer ones with 1 or 2. 6v square lantern battery connected with alligator clamps. Older models with 2- 6 volt lead acid batteries.

Product features

Moultrie Pro Magnum Hanging Deer Feeder |30-Gallon | Digital Timer | Metal Hanging Bar

Enjoy superb protection against even the most determined pests with all metal parts, including a varmint guard that prevents birds, squirrels and raccoons from raiding your feeder. Designed to hang easily from any rope, chain or cable, this feeder also features a metal spin plate with raised edges, to protect feed from the wind. A dual-battery compartment can hold an extra 6-volt spare while a built-in battery indicator lets you know when they need changing.

• Digital timer programs up to 6 feed times a day, 1 to 20 seconds each
• All-metal housing, barrel, spin plate, varmint guard and funnel
• Built-in feed-level estimator, battery indicator, external power port and solar panel connectors (solar panel sold separately)
• Metal hanging bar included for easy assembly