9 best mora ice augers
Mora ice augers are specialized tools used in ice fishing, primarily related to the Ice Augers, Ice Fishing, Fishing, Hunting Fishing, Sports Fitness, and Sports Outdoors categories. These augers are designed specifically for drilling holes through the thick ice covering bodies of water during the winter months. Here's what you should know about Mora ice augers:
Purpose: Mora ice augers are used by ice anglers to create holes in the ice for fishing. These holes provide access to the water below, allowing anglers to set up their fishing gear and catch fish through the ice.
Design: Mora ice augers are typically hand-powered tools, although there are also power auger options available. Hand augers consist of a metal cutting blade or drill bit attached to a shaft with a T-shaped or L-shaped handle for manual operation. Power augers are typically gasoline or battery-powered and are motor-driven.
Blade Types: Mora ice augers commonly feature single or double blades made of high-quality steel.Single blades are efficient for cutting clean, precise holes, while double blades can provide faster drilling in some cases.
Drilling Efficiency: These augers are designed for efficient ice drilling, making it easier for anglers to create holes quickly and with minimal effort. Sharp blades and ergonomic handles contribute to their efficiency.
Size and Diameter: Mora ice augers come in various sizes and diameters to accommodate different fishing needs. Smaller augers are suitable for panfish and smaller species, while larger augers are better for targeting larger fish.
Portability: Hand-powered Mora ice augers are known for their portability. They are lightweight and easy to transport to ice fishing locations, making them a popular choice for anglers who prefer mobility.
Durability: Mora is known for producing durable ice augers that can withstand the rigors of ice fishing. Quality construction and materials contribute to their longevity.
Maintenance: Proper maintenance is essential to keep Mora ice augers in good working condition. This includes regular sharpening of blades and lubrication of moving parts.
Safety: When using ice augers, especially power augers, anglers should exercise caution to prevent accidents. Safety measures may include wearing appropriate gear, being aware of ice conditions, and following manufacturer guidelines.
Accessories: Some Mora ice augers come with accessories such as blade covers, extension shafts, and carrying cases to enhance convenience and protection during transportation and storage.
In summary, Mora ice augers are essential tools for ice fishing enthusiasts. They offer a reliable and efficient means of drilling holes through ice-covered lakes and rivers, allowing anglers to access the water below for their fishing activities. The choice between hand-powered and power augers depends on personal preferences and fishing requirements. Proper care and maintenance are essential to ensure these tools remain effective over time.
Below you can find our editor's choice of the best mora ice augers on the market
StrikeMaster 290149 Mora Hand Auger-6 in. MD-6
StrikeMaster
Product description
The StrikeMaster Mora hand auger is 6 inches. It features high alloy carbon steel blades. It has powder coated paint to reduce ice build-up. It has soft rubber grips. There is an ergonomic designed handle system. The handle adjusts from 48 inches TP 57 inches and it weighs 6 pounds.
- Made of highest quality material
- The Package Height Of The Product Is 8 Inches
- The Package Length Of The Product Is 34 Inches
- The Package Width Of The Package Is 10 Inches
User questions & answers
| Question: | Does this have an adjustable handle height |
| Answer: | Yes the black wing nut near the middle unscrews and you can adjust the overall height from there. |
| Question: | Can this be used to dig holes for gardening in dirt |
| Answer: | It is made to cut into ice, and if used on ice it will last a season or two without having to resharpen the blade. It would probably dig a few holes in soft dirt without rocks, but it would dull quickly and need to be sharpened frequently. |
Strikemaster Mora Blade Hand Auger (5-Inch)
StrikeMaster
Product description
5-inch Manual Ice Auger
- High Alloy Carbon Steel Blades
- Powder Coated Paint to Reduce Ice Build-up
- Soft Rubber Grips
- Ergonomic Designed Handle System
- Adjustable Handle: Adjusts from 48" - 57"
User questions & answers
| Question: | Any suggestion? We can’t get this to dig into ice, even with a drill adapter. Yes, the blades seem sharp & we’re using it straight up. Ice is |
| Answer: | Can't say if it would work.. the bought it for our and worked fine, but don't remember the GE refrig # as we have sold it. |
| Question: | Could this auger be used to dig post holes in soft soil, non rocky |
| Answer: | Yes, this fits ge gsh25jgdcww. |
| Question: | Will power drill adapter fit the Mora 5 inch |
| Answer: | Yes, WR30X23255 does fit model gsh25jstass. |
| Question: | Can this be used to aerate compost |
| Answer: | The one we purchased works just like the original one and crushes ice just fine for us |
Strike Master Ice Augers Mora Blade Guard, 6-Inch
StrikeMaster
Product description
Heavy duty plastic guard complete with holding strap, for Strike Master MORA series hand augers
- Country Of Origin : Sweden
- The Package Height Of The Product Is 1.27 Centimeters
- The Package Length Of The Product Is 17.78 Centimeters
- The Package Width Of The Product Is 25.15 Centimeters
Strike Master Ice Augers Mora Blade Guard, 7-8-Inch
StrikeMaster
Product description
Heavy duty plastic guard complete with holding strap, for Strike Master MORA series hand augers
- Country Of Origin : Sweden
- The Package Height Of The Product Is 6.86 Centimeters
- The Package Length Of The Product Is 35.31 Centimeters
- The Package Width Of The Product Is 17.53 Centimeters
User questions & answers
| Question: | do i need 1 for each blade |
| Answer: | No, the blade cover gets both blades. |
| Question: | If the blue mounting on the auger in 5 3/8” wide. do i have a 5 or 6” mora hand auger. need to know what size blades to order |
| Answer: | 6" |
| Question: | Only one blade don’t they usually come as a set of |
| Answer: | they come in sets of two. you're missing one |
StrikeMaster Mora Hand Auger Replacement Blades, 6-Inch
StrikeMaster
- Package length: 10.414 cm
- Package width: 2.54 cm
- Package height: 17.526 cm
- Product Type: FISHING EQUIPMENT
User questions & answers
| Question: | Where were these blades made |
| Answer: | made in Sweden |
| Question: | Will these blades fit on the ht polar hand ice auger |
| Answer: | I doubt it. The blades are very specific to the brand of auger. I googled your hand auger and found some blades specific to your auger for approximately $15. |
| Question: | What is the grind angle on the 8" blades |
| Answer: | I used the 6" blades, if you're talking about grinding to sharpen the blades I'd say about 22 degrees |
| Question: | seller - where are these made |
| Answer: | Why would it matter where there made? Its an auger for drilling ice its not like your going to marry it. |
StrikeMaster 6" Mora Replacement Blades - for Mora Ice Auger (Blue Shaft) - #MD-6B - Made in Sweden
StrikeMaster
Product description
6" Strikemaster Stainless Steel Replacement Blades - Made in Sweden - For Blue Mora Auger (NOT Black!) - Item #MD-6B - UPC #043253000038 - Our Best Selling Blade! - Replace Blades to Save time, so you can fish more with ease! - Keep out of reach of children! Very Sharp! - *Blades Only, Auger NOT Included*
- 6" Ice Auger Replacement Blades
- Stainless Steel
- Sharper, Faster, Stronger
- *For the 6" Mora Ice Auger*
- **Blades Only - Auger Not Included!**
Strike Master Ice Augers Mora Blade Guard, 5-Inch
StrikeMaster
Product description
Heavy duty plastic guard complete with holding strap, for Strike Master MORA series hand augers
- Package length: 15.24 cm
- Package width: 18.541 cm
- Package height: 3.048 cm
- Product Type: FISHING EQUIPMENT
8 Inch Flat Replacement Ice Auger Blades for Eskimo/Mora/Strikemaster/Rapala/HT/Nordic Legend
ThunderBay Outdoor Products
Product description
Thunderbay 8 inch ice auger blades are made to fit most flat blade hand auger designs. Precision ground steel is heat treated to increase hardness insuring a longer cutting life.
- Designed for most 8 inch straight blade hand ice augers
- Precision ground cutting edge is extremely sharp for fast cutting
- Installs in minutes, all hardware included
- Sold as a two blade set
User questions & answers
| Question: | How do these compare with sweedish steel mora blades |
| Answer: | Initially, just as good as Mora. Not sure of longevity; haven't used them enough, over time. |
| Question: | Will these fit a Nordic Legend B33 8" auger to get rid of the chipper style blades |
| Answer: | Here is the correct purchase link of the 8-in replacement blades for power ice auger use. https://www.amazon.com/dp/B018CNVNMU |
| Question: | Will these fit an 8” Mora Strikemaster |
| Answer: | Yes, put them on 2 Mora augers. |
| Question: | Better auger strikemaster or Eskimo |
| Answer: | Both are good . I have owned both and depending on price you can't go wrong either way |
Vendetta Precision Ice Auger Adapter - Stainless Steel - Strikemaster/Mora/Lazer/Eskimo
Vendetta Precision
Product description
New 2019 Design! Revised LONGER SHANK! We listened to your reviews and feedback! Are you tired of cranking that handle 'round and 'round shaving away ice little bits at a time? Getting nowhere fast with your prime fishing hole? Crank no longer with our innovative auger adapter! Simply install into your ice auger and chuck it up to your favorite cordless drill and let the powertool do the work. Never worry about cold-starting your gas auger again either. Drill as many holes as you want with ease. Our auger adapter is made of 303 stainless steel and is made by us right here in Wisconsin. Don't let your ice fishing season slip by with that time-consuming hand auger and try one of our power drill auger adapters today! ***Clamp TIGHTLY on flats of adapter only or damage will result!
- NEW 2019 Design with LONGER SHANK! For use with Lazer/Mora, Eskimo and similar augers
- Overall Length: 2.5
- Body Diameter: 0.720"
- Fits drill chucks 1/2" and larger
- 1/4" hole for 1/4-20 wing bolts and locking screws
User questions & answers
| Question: | Will this work for a Hiltex, 10246, 6"x30", Steel Gardening Auger Bit (3/4" Shaft) and a corded 1/2-inch Skil 7.0 amp drill to drill into dirt |
| Answer: | Yea it can be used for this however, it will definitely dull out the blades but it will do a wonderful job for that unintended purpose |
| Question: | Best drill to pair with 8 inch laser auger |
| Answer: | I would say yes I had one on my last auger which was a Mora. All I will say is to make sure you chuck it down real good. |
| Question: | What amount of torque on a drill is needed |
| Answer: | if you either take the very sharp cutting blade off or don't care about dulling the blade, it would probably work great on compost. |
| Question: | Does it work on a Nils 6" auger |
| Answer: | my drill has a blade and a protective cover that fits over the blade |
Latest Reviews
View all
Truck Winches
- Updated: 25.02.2023
- Read reviews
Industrial Shrink Wrap Supplies
- Updated: 11.02.2023
- Read reviews
Cinnamon Bark Capsules
- Updated: 01.05.2023
- Read reviews
Mini Mechanical Keyboards
- Updated: 29.06.2023
- Read reviews
Mens Unique
- Updated: 28.04.2023
- Read reviews