12 best pullup bar for wall

• ONE-PIECE SOLID STEEL CONSTRUCTION: Yes4All Wall Mount Chin Up Bar is made of heavy gauge steel for more durability and covered with black powder coating to prevent rust and corrosion. Designed for 16” and 24” stud space
• MULTI-GRIP POSITIONS PADDED WITH SOFT FOAM: Foam padded grips bring comfort to your hands and prevent slipping caused by sweat during the whole workout time
• GREAT FOR BUILDING UPPER BODY STRENGTH: Perfect for working out your backs, shoulder, chest, arms, triceps, biceps, lats, and the front of your abs
• HIGH WEIGHT CAPACITY: Our chin up bar can support up to an astounding 300lbs of weight, ensuring peak performance for a long time even after heavy long time usage
• QUICK AND EASY INSTALLATION: Yes4All Chin Up Bar comes with full instructions and all mounting hardware so that you can get it usable almost as soon as it’s delivered to your home

User questions & answers

Question:	how tall in the mount that the bolts go into? Looks like about 6 inches?? I plan to bolt this to a metal bar
Answer:	I started to get mold also...then had an epiphany! I had been using my good, filtered water, it's better for everything, right? NO! I switched to the (chlorinated) tap water and haven't had a problem since. I make my own kombucha. I was careful to heed all of the warnings that using unfiltered/chlorinated water will kill the necessary bacteria. I realized that was a GOOD thing with my butter bell. Voila! No more mold! Of course, this was in addition to adding salt to the water (unsalted butter), changing the water at least once a week and other suggestions listed here.
Question:	The wall plates are so short that I'm afraid it will not hold on a wall of a 1930's apartment building. Any experiences here? Screws also seem short
Answer:	No you don't but you should change the water every 2 to 3 days. I use the butter and then wash the whole keeper and refill with butter and water in the bottom section about 1 inch deep.
Question:	does it come with a safety wedge
Answer:	I saw from the other answers it's made in China. I have one made in the USA, it has a very smooth finish. You have to press the butter into it and it won't fall out. Must change the water about every three days. I think they are fantastic! I have given two of these as gifts!
Question:	What's the measurement of the plate that attaches to the wall? and the distance between the top and bottom screw in one of the plate? Thank you
Answer:	Yes, the butter is upside down when closed. When you pack a cube of softened butter into it, it adheres to the sides and bottom of the container. I use a soup spoon to pack it in and eliminate any air pockets. when you place the butter container into the bottom, with @ ¼" of water in it, it creates a vacuum and the butter stays fresh and in place. Kid use, depending upon age, should be no problem as all you do is pull it up out of the container and turn it over. They can easily master gently returning it to the container.

Product features

Solid Steel Construction

Heavy duty steel frame ensures super stability and durability, ready for the most vigorous workouts.

Multiple Grip Positions

Three separate high-density foam grip positions include wide, neutral and narrow grips to assist you in various upper body exercises.

Versatile, Ideal For All Levels

Precisely engineered for 16" and 24" stud space. Full set includes mounting hardware, full assembly instruction.

Pull Up, Chin Up and more

Designed for variety of upper body exercises from wide-narrow grip pull ups, band assisted chin ups to hanging leg raises and many more.

Assisted with Ab Straps

The Ab Straps are compatible with any chin up bar. Simply wrap the straps around the bar and under your arms for a challenging yet safe workout.

Pull Down with LAT pulley system

Build your own personal home gym with a chin up bar and LAT pulley system to target more muscles and experience various exercises.

• 1. 25-INCH THICK HEAVYWEIGHT STEEL CHIN-UP BAR: Yes4All Wall Mount Chin-up Bar is constructed of heavyweight steel to ensure safety and stability. Solid steel construction to handle the demands of seasoned athletes and amateurs alike
• HIGH WEIGHT CAPACITY: Our Wall Mount Chin-up Bar can support up to 500lbs of weight, ensuring peak performance for a long time even after heavy long time usage
• 30 INCHES OFF WALL CLEARANCE: Maximum clearance for greater exercise variety, including chin-ups, pull-ups, ring dips, and kipping. Ideal space for working out with accessories like ab straps and gym rings
• HIGH-QUALITY POWDER COATED FINISH: The powder coating finish will not become slippery like chrome or glossy competitors. Best finish surface ensures many years of hard use even for the most demanding athletes
• QUICK AND EASY INSTALLATION: Can be installed vertically or horizontally. Compatible with all wooden and concrete floors or ceilings. Full package includes all mounting hardware to securely hang your chin up bar in place in a flash

User questions & answers

Question:	How wide are the wall mount brackets
Answer:	Hi Dan, The wide of wall mount bracket is 50 inches. Hope it helps. Best regards, Yes4All Team
Question:	how can i contact the seller
Answer:	Email
Question:	Would this hold a hanging chair?i want to put a hanging round seat in my room, but my ceilings are tile.If i put this on the wall would it hold?thanx
Answer:	Max is supposedly like 400 lbs. Mine is holding sturdy in the beams.
Question:	Are the wall brackets 48 inches on center apart so that they can be lag bolted into 16 inch on center studs
Answer:	I received mine and unfortunately it a little too wide. The width of the fully assembled bar is 50 and 3/4”. Which places my mounting holes right at 49” apart. Which is very frustrating now that there is a tighter window to hit the outer edges of the mounting studs. The Quality control supervisor must have been on a smoke break for the fabrication of mine.

• WALL MOUNTED REQUIREMENTS: Concrete brick/solid cement wall/solid red brick wall /solid tile wall are a great surface for mounting this pull up bar and dip station. DON'T install on hollow brick wall/honeycomb brick wall/drywall /sandwich panel.
• STABLE: The 6-hole design of the OneTwoFit Wall Mounted Pull Up Bar is more stable and safer than the 4-hole design of the regular product. The maximum weight is 440 Lbs/200kg
• DURABLE: Solid steel bar with black powder coating to prevent rust and corrosion and prolong service life
• EXERCISE: Soft cushions make your hands comfortable and increase your workout time
• EXERCISE AREA: The Wall Mounted Pull Up Bar is suitable for exercising the back, shoulders, chest, arms, triceps, biceps, strain and abdomen front, both indoors and outdoors

User questions & answers

Question:	Can I hang a heavy bag from this
Answer:	Sure but you really need to anchor this bar into the studs and of course it's not spaced correctly to make it easy. You have to run horizontal 2x4's anchored into the studs then hit those with the anchors for the bar. If I went into concert/block I'd get to the hardware store for better concrete anchors.
Question:	Why does this need anchored into concrete? Any reason I can’t lag it into a 2x12 beam in basement
Answer:	It doesn't need to be anchored into concrete. You can lag it into a 2x12 beam in your basement.
Question:	What is the weight limit
Answer:	The weight limit is listed in the description as 440lbs.
Question:	Where is this product made
Answer:	China! Where else?

Product features

Exercise your body:

How to assemble:

Product description

Description

This multi-function wall mount pull up bar is made of heavy duty steel to ensure stability and durability. It's specially designed to strengthen the entire upper body and abs you may perform such exercises as pull-ups, sit-ups, push-ups, leg raises and more. It allows you to exercise more muscles performing hundreds of different exercises in longer workouts. A good choice to realize your fitness goals.



Features

Thicken Steel Frame - will not fail or bend to ensured stability and durability.

Comfortable - Humanized design with elbow pads, effectively reduce the pressure on the spine.

5-IN-1 Wall Mount Gym Machine - can be used as pull up bar, dip stand, push up bar, TRX/punching bag mount and exercise bar.

Multifunctional Training - support more than 50 kinds of sport exercise, like pull-up, dips, sit-ups, push-ups, leg and knee raise and more. All-around training abdominal muscles, arm, back, chest, shoulders, leg muscles.

Solid Triangular Structure - Featuring triangular bracket design with reinforced screws, it can reinforce load bearing to ensure stability and durability.

Superior Details - High density non-slip grips provide comfort when you are exercising. Screw reinforcement for stability. Strong Suspension Hooks for easy assembly.

Wide Usage - The pull up bar can be installed in the room, home or commercial gym.



Package

1 x Wall Mount Pull Up Bar

1 Pair Elastic Bands

1 Pair Gymnastic Rings

• 3-IN-1 HOME WORKOUT KIT - Includes 1 x multi-functional wall mount pull up bar, 1 pair elastic bands, 1 pair gymnastic rings. With the pull-up bar wall mount specially designed to strengthen the entire upper body. You can install this mounted pull up bar in the room, home or commercial gym.
• MULTIFUNCTIONAL FITNESS MACHINE - Can be used for a variety of exercises: pull ups, chin ups, dip station, vertical knee raise, push up and leg raises. Perfect for exercising your backs, shoulder, chest, arms, triceps, biceps, lats, and the front of your abs.
• HEAVY DUTY STEEL CONSTRUCTION - Made of heavy-duty steel with high density non-slip grips and padded back and armrests, it's built to last. One-piece solid construction ensures stability and durability.
• EASY ASSEMBLY - 4 Strong Suspension Anchors. For assembly and installation, you will need this set. Be it concrete, brick on cinder blocks, you can install the bar on any of them.
• COMPLETE SET FOR CORE WORKOUT - Equipped with special mount for suspension trainer TRX and punching bag.

User questions & answers

Question:	How can u advertise it as a dip station if it’s mounted 6 foot in the air
Answer:	Yes
Question:	Does it work installed into wood studs? It says brick, concrete or cinder blocks. Thank you
Answer:	Dimensions are: 30"W x 12"D x 30"H
Question:	How do i get an installation manual or instruction book, none in the box for the odoland 3-in-1 wall mount pull up bar chin up bar and dip station
Answer:	The Wine Rack has a bronze finish.
Question:	Hello, I didn't receive my order and it says was delivered, ups says talk with amazon, and amazon is confusing me, I need my items or a refund please
Answer:	Particle board with a marble look paper or plastic coating

Product description

Description

Heavy weight steel constructions ensures stability and solid feel just like in your favorite Cross Fit gym. Guaranteed to handle the demands of seasoned athletes and amateurs alike! Coated in a matte black powder coat, it will not become slippery like chrome or glossy competitors so you can finish that workout of the day without a pause. Best fit and finish ensures many years of hard use even for the most demanding athlete.

Specifications

Condition: Brand new

Color: Black

Material: 1" x 2" 11 Gauge Steel

Bracket Height: 33"

Bracket Depth: 28.7"

Bar length: 50"

Bar diameter: 1.25"

Shipping

All items will be shipped out in 1 business day,no expedited service available.

We ship our items to USA only(Does NOT include Hawaii，Alaska or Puerto Rico, PO Boxes/APO's ).

Contact us

Any Questions,Just feel free to contact us on Amazon.We will reply you in 24 hours.

• 500 lbs capacity,Can be installed vertically or horizontally
• Bracket Height: 33" ,Bracket Depth: 28.7" , Bar length: 50" ,Bar diameter: 1.25"
• Heavy duty steel for strength and durability
• Package list: Two L Shaped brackets One long bar Hardwares for assembling
• One Year Warranty

User questions & answers

Question:	Can this be installed into a concrete wall
Answer:	It's 5 pounds
Question:	Does this bar support kipping pull-ups
Answer:	I bought regular size , fits fine
Question:	Will there be more 50” pull-up bars in stock to purchase
Answer:	1 size up. You really should go to a store and try them on.
Question:	Is the width designed such that the wall mount holes fall on standard stud spacing dimensions, i.e. 16, 32, 48 inch
Answer:	About a half gallon

Product description

Get the Wall Mount Pull Up Bar designed for you and your home. The mounted bar is ultra stable for intense reps, provides full range of motion so you can move distraction free, and is always ready for a quick set to blast your metabolism even when you are tight on time.

• NEW IMPROVEMENTS for 2019: Upgraded 42 inch wide single-piece pull up bar is now top mounted on the risers for enhanced durability. Four dedicated grip positions expand workout options with overhand narrow-grip pull ups and true wide-grip pull ups.
• BETTER WORKOUTS: Industry leading 14 - 21 inches of wall clearance provides maximum range of motion. High density foam grips reduce strain for longer workouts. Padded grip positions at 10, 16, 24, and 36 inches lets you target the results you want.
• RIGID MOUNT: The top rated Wall Mount Pull Up Bar by Ultimate Body Press bolts is built ultra-strong for strenuous workouts. A rigid bar frees you to focus on form and repetition so you can get more out of your workout time
• EASY INSTALLATION: The Wall Mount Pull Up Bar is precision engineered for easy home installation on 16 inch on-center wall studs. Complete hardware, mounting template, instructions and USA tech support are included.
• IDEAL ANCHOR: Anchor optional Bodyweight Resistance Trainers to turn your pull up bar into a full bodyweight gym. Complete full sets of pull ups and other challenging exercises right from day one with assisted exercise variations. [sold separately]
• DESIGNED IN THE USA: Ultimate Body Press is a North Carolina company committed to delivering better workouts every day. Includes Prime eligible shipping, USA customer service and 100% satisfaction guarantee
• 10 YEAR WARRANTY: The Wall Mount Pull Up Bar is backed by Ultimate Body Press against manufacturer's defects for 10 years
• The Maximum weight the bar can hold is 300 lbs.

User questions & answers

Question:	I am 110kg(about 245 lbs). Is it enough strong for me
Answer:	According to some reviews I have read, it is. As long as it is fastened to studs, you should be ok. Im not 245 so I cant speak to it personally. I would read more reviews if I were you. Good bar though.
Question:	How large is it? Measurements please
Answer:	UBP Response: In the Spring 2014 we improved upon the design based on customer feedback. The improvements include increasing the wall thickness on the mounting plates and pull up bar tubing and changes to the dimensions to increase clearance from the wall and improve grip options. Current dimensions are as follows:pull up bar width=40 inpull Up bar distance to wall=13 inparallel grip length= 5.5 inparallel grip distance to wall 14.5 in - 20 inmounting hole spacing horizontally=16 in center to centermounting hole spacing vertically=7.87 inmounting plate height=9.5 inmounting plate width=3 in
Question:	Can this bar be mounted on studs above a doorway so there is room for legs to swing forward through the door if needed
Answer:	I wanted to accomplish the very same thing when installing the bar. However, the way that doors are framed, the bar would be off-center. The pull up bar would be more or less perpendicular with the door jamb. I thought it would be awkward, so I went ahead and installed it on my garage wall. I was pleasantly surprised to find that it was far enough away from the wall for my liking. You could also turn facing away from the mounting hardware to accommodate leg swing. Otherwise, the construction of this product is very solid and I am very happy with my purchase.
Question:	Has anyone mounted this to finished stud walls? Any damage to the drywall after using this? (I'm not talking about mounting to drywall alone
Answer:	Hi Mike. Yes, I mounted this unit to the finished walls in my house. First, to answer your question, there is no damage to the drywall associated with the installation. The 4 holes you drill are hidden behind the mounting plates. However, the unit is pretty close to the wall, and I've had some...minor yet unexpected issues from use. First is that it's easy for your feet to strike the wall when doing pull-ups. Once you start exerting yourself, it's easy for your feet to swing around a bit. Avoid wearing shoes and this shouldn't be an issue. Secondly, I've noticed that over time, there are some stains on the wall that I can only assume are coming from sweat or saliva when I'm grunting out the final reps. As for installation, I have a couple tips that I uncovered while installing mine. First, find the center of just one stud. I use a stud finder, but then used a 1/64" drill bit to drill to the left and right, so when I was off the stud on each side, I could split the difference and be sure I was in the exact center. This unit mounts with large lag screws, and if you are not in the middle it could break out during use...anyway, then what you want to do is mount this first unit to the wall, but only tighten up the lag screw just unit the unit holds itself on the wall. Then, mount the pull-up cross bar to the wall mount, just getting it slightly snug. Then, place the second wall mount up and bolt the cross bar to it, finger tight. Using a level, parallel the mounting plates and mark your holes. This is important because there is very little play between the cross bar and the mounts; if you are off by even a little bit, the bolts won't drop into place. By having the cross bar in place and finger tight before you drill your second set of holes solves this. Oh, one last thing. The foam grips are comfortable, but don't hold up well at all if you are using gloves. Be prepared to buy some rubberized grip tape within a few months. All in all, this is a very solid unit for the price, and I'd buy one again. Best, Bill.

Product features

Wall Mount Pull Up Bar with Four Grip Positions

Get the Wall Mount Pull Up Bar designed for you and your home. The mounted bar is ultra stable for intense reps, provides full range of motion so you can move distraction free, and is always ready for a quick set to blast your metabolism even when you are tight on time.

Get Results at Home with the Pull Up Bar Designed for You

Pull ups are the single best bodyweight exercise and rapidly sculpt muscle across your arms, chest, shoulder, back and core. Activating multiple large muscle groups in a single motion triggers your metabolism for maximum fat-burning effect and tremendous muscle gains. Your mounted bar is always ready for a few quick reps or a full workout so you can build on your progress daily.

Target More Muscles with Four Grip Positions

Alter your grip to target different muscle groups. Your challenge increases as your build strength and work your way up from chin ups and neutral grip pull ups to narrow and wide-grip pull ups.

Expand your Workouts with Optional Accessories (sold separately)

The Wall Mounted Pull Up Bar is the perfect anchor for optional accessories, Ab Straps (shown), and Gymnastic Rings. (accessories sold separately).

Accessories expand your workout options and help you reach your goals even if you are new to working out with a pull up bar. Accessories enable full body training and assisted exercise variations. Assisted exercises let you complete full sets of every exercise for better workouts every day.

(accessories are sold separately).

Get Results

Pull ups are a compound exercise that blast your metabolism by triggering multiple large muscle groups simultaneously.Time spent daily in any capacity with a pull up bar nets massive results in building definition, power, functional strength, and mobility even if you are working up to you first pull up with assisted pull up variations. Pull ups are simply the best single exercise you can do.

All Steel Construction & Easy Installation

Black powdercoat finish over perfect welds look great and last a lifetime.

Precision machining means the mounting holes meet your wall studs exactly 16 inches on center.

Full assembly and mounting instructions for residential installation are provided and all mounting hardware is included.

Improved Stability for Better Workouts

More people than ever are using their pull up bars for workout accessories like Ab Straps and Gymnastics Rings and the improved Wall Mount Bar is our strongest yet.

Building on an already rigid bar, we increased steel thickness for the bar and the mounting plates by 30%.

And based on Amazon user feedback we upgraded the mounting hardware with larger diameter bolts.

Comfort Options: High Density Foam Grips over Knurled Steel

Whether you prefer the feel of non-slip knurled steel or the comfort of high density foam, the Wall Mount Bar provides the fit you need for extended workouts.

A pull up bar that exceeds your expectations lets you focus on form and repetition.

Get the Wall Mount Pull Up Bar from Ultimate Body Press - the workouts are great, the results are even better.

Performance Dimensions

Parallel grip wall to tips: 21 inch.

Parallel grip length: 5.5 inch.

Distance wall to bar: 14 inch.

Pull up bar width: 42 inch.

Mounting hole spacing: 16 inch on center.

Mounting hole vertical spacing: 7.87 inch.

Mounting plate height: 9.5 inch.

Mounting plate width: 3 inch.

About Ultimate Body Press

Our passion is providing fitness equipment that lets you get the most from your workouts every day. By producing high quality affordable products that look great and function beyond expectation we can create a rewarding space in your life for exercise and help you reach new levels of health, well being and personal performance.

We value your fitness and are proud to serve your gym needs. Ultimate Body Press fitness gear is backed with USA tech support.

• 【Wall Mounted Requirements】 Concrete wall or brick wall is suggested for mounting this pull up bar and dip station. DON'T install on drywall, plaster walls and cavity.
• 【Heavy Duty Steel Construction】 This wall mounted pull up bar is made of heavy duty steel,which offers great stability and rigidity,supports up to 440 pounds.
• 【Multifunctional】Can be used for a variety of exercises that effectively build muscle across the chest, arms, back and core with chin-ups, push-ups, dip station,leg raises.
• 【Comfortable,Durable Cushion】Tear resistant,Well-padded,high density,padded back and arm cushions provide comfort as you work out your abdomen, waist, chest, and upper limbs.
• 【Easy to Assemble】4 (7mm) Strong Suspension Anchors. For assembly and installation you will need: Hammer drill with 12mm(15/32 In) for concrete or brick walls.

User questions & answers

Question:	Where can I obtain extra hooks
Answer:	You need to lift it a short distance off of the upper brackets and just spin it and slide it into the lower brackets. It’s a very quick, simple change.
Question:	Does the unit just swing back and forth to go from pull up to dip? Or do you have to take it down and turn
Answer:	You could, we also have a plastered wall and we opted to mount 2x8s to the wall and the The bar to the boards and it works awesome!
Question:	I have a plastered wall. Can i mount it into the wall studs
Answer:	Height isn’t an issue as you can mount the unit at any height you want. The potential issue with a bigger frame is the width of the unit. I have a 44 inch chest and I barely fit for dips or knee raisers.
Question:	A lot of people mention it can handle a pretty heavy weight; but what are the height limits for this product? Can a 6'1" person use this
Answer:	Yes, this is the image transfer belt.

Product description

The New Wall Mount Doorway Pull Up BarPull up exercises are real strength training in compound movements that activate the metabolism and build functional muscle across the shoulders, arms, back and core. The Wall Mount Doorway Pull Up Bar is the Ultimate Body Press exclusive that makes maximum use of your doorway opening as a rigid structural mounting point with full range of motion built right in. Fully welded all steel construction and thick contoured bar with 'Perfect Grip' hammertone texture provide the comfort, stability and confidence you need to focus on form and reps so you can get the results you want in less time. Hardware and mounting instructions are included for the easiest installation and your bar is backed with USA tech support and our 100% satisfaction . More than a Doorway BarThe Wall Mount Doorway Pull Up Bar was originally conceived as an upgrade to traditional doorway pull up bars and as an easy step into owning a mounted pull up bar. Owners have told us that it is much more then an entry level bar, it's a leading value in home fitness that is rewarding to workout on, inspires intense training, and can be installed out of view in larger closets and other small spaces so there's zero impact on your decor. With your bar mounted above a doorway, you have room to move for all your favorite HIIT exercises and you can work out harder when using optional accessories like Ab Straps and Bodyweight Resistance Trainers. (accessories sold separately) Shop with ConfidenceAt Ultimate Body Press we are proud to serve your gym needs and want to exceed your expectations for customer service. Customer service has complete resources to assist you and is available by phone or email. Your satisfaction is 100% , order your Wall Mount Doorway Pull Up Bar Pull Up Bar today.

• THE MOUNTED DOORWAY BAR: The Wall Mount Doorway Pull Up Bar is the Ultimate Body Press exclusive that combines the space saving versatility of a doorway pull up bar and the rigid performance of a mounted bar for better workouts every day
• ALL WELDED STEEL: The rigid mount Doorway Pull Up Bar supports focus on form so you can effectively increase rep counts in 3 grip positions. Thick 1. 25” tubing stands a full 4. 25” off your wall to leverage your doorway for full range of motion
• EASY INSTALLATION: The Wall Mount Doorway Pull Up Bar is precision engineered for easy home installation and includes assembly instructions, complete hardware, and USA tech support
• IDEAL ANCHOR: Anchor optional Bodyweight Resistance Trainers to turn your pull up bar into a full bodyweight gym. Complete full sets of pull ups and other challenging exercises right from day one with assisted exercise variations. [sold separately]
• DESIGNED IN THE USA: Ultimate Body Press is a North Carolina company committed to delivering better workouts every day. Includes Prime eligible shipping and USA customer service
• SHOP WITH CONFIDENCE: The Wall Mount Doorway Pull Up Bar is backed by Ultimate Body Press against manufacturer's defects for 10 years
• NOTE: 36 inch bar AND minimum 38 inch width required for installation

User questions & answers

Question:	Does anyone have the specs on the screws/bolts? I would like to upgrade to more weatherproof ones. Thanks
Answer:	Lag bolts have 17mm hex head and are about 3" long. I used structural screws instead but needed to use fender washers to fit the slots.
Question:	Can Ultimate Body Press suspension straps be used with this model
Answer:	I use suspension straps with ring type grips with mine with clients, works great. Makes for a good anchor point.
Question:	What is the distance center to center between the top and bottom of the area for the bolts? I plan on mounting this on 6" (actual 5 1/2") beam
Answer:	4 inches.
Question:	Specs indicate it is 36" wide; I'm assuming this measurement is end to end at base of brackets. Also, inside width, bracket to bracket
Answer:	Outsides of the brackets measures 37 3/4" and insides of the brackets is 28 1/4". I measure 36" across at the mid point of each part of the bar that goes into the bracket.

Product features

Ultimate Body Press Wall Mounted Doorway Pull Up Bar

The Wall Mount Doorway Pull Up Bar is the Ultimate Body Press exclusive that makes maximum use of your doorway opening as a rigid structural mounting point with full range of motion built right in. Fully welded all steel construction and thick contoured bar with 'Perfect Grip' hammertone texture provide the comfort, stability and confidence you need to focus on form and reps so you can get the results you want in less time.

Universal Fit for 24-30 Inch Doorway King Studs.

All stud framed homes utilize 'King Studs' to anchor doorway casings from the floor all the way up to the ceiling. King Studs are some of the strongest structure in your home and they are simple locate. When you are ready for real results in your home gym, you are ready to own a mounted pull up bar and doorway mounting with king studs makes it easy.

The Low Profile Bar with Full Range of Motion

The ultra stable Wall Mount Doorway Pull Up Bar supports focus on form so you can effectively increase rep counts in 3 grip positions. Thick 1.25 tubing stands a full 4.25 inches off your wall to clear trim and leverages your open doorway opening to give you the range of motion you need to workout distraction free.

Ergonomic Design Supports Variation and Full Sets

The Wall Mount Doorway Pull Up Bar also features a state of the art combination of grip angles previously available only on commercial gym equipment. By providing a more natural hand position during chin ups, pull ups and wide grip pullups, the finely tuned angled grips help you avoid over articulation of the shoulders and reduce strain on your wrists and elbows.

Pull Ups are The Single Best Bodyweight Exercise

Pull ups rapidly sculpt muscle across your chest, back, shoulders, arms and core. Activating multiple large muscle groups in a single motion triggers your metabolism for maximum fat-burning effect and tremendous muscle gains. Your mounted bar is always ready for a few quick reps or a full workout so you can build on your progress daily.

Assisted Exercise Variations Support Full Sets from Day One

A mounted pull up bar is the ideal anchor for full body workouts with optional Gymnastic Rings (sold separately). Gymnastic Rings expand your workouts with compound movements to build lean muscle fast and spike your metabolism with every workout. Gymnastic Rings also enable assisted exercise variations for pull ups, dips, squats and push ups so you can complete full sets of high intensity workouts right from day one. (accessories sold separately)

Ab Straps Develop Core and Lower Abdomen

Ab Straps take the strain off your hands and wrists for complete sets of knee raises. Ab Straps turn your pull up workouts into massively effective activation for your core that help you look great and move even better. Ab Straps make core activation easy for any level fitness enthusiast. (accessories sold separately)

About Ultimate Body Press

Our passion is providing fitness equipment that lets you get the most from your workouts every day. By producing high quality affordable products that look great and function beyond expectation we can create a rewarding space in your life for exercise and help you reach new levels of health, well being and personal performance.

We value your fitness and are proud to serve your gym needs. Ultimate Body Press fitness gear is backed with USA tech support. Tech support has complete resources on every product so you can shop with confidence.

• Heavy Duty Steel Construction：This wall mounted multifunctional pull up bar is made of heavy duty steel,which offers great stability and rigidity,supports up to 440 pounds.
• Multifunctional Fitness Machine：Wall mounted pull up bar can support many kinds of sport exercise like pull ups, chin ups, dip station, leg raises and boxing. Perfect for exercising your backs, shoulder, chest, arms, triceps, biceps, lats, and the front of your abs.
• 2 Hinged Rings:Strong enough to attach additional trainng accessories: punch bags, TRX strap, power ropes or yoga straps, offering countless possibilities for your exercises.
• Wall Mounted Requirements：Easy Assembly - Be it concrete, brick on cinder blocks, you can install the bar on any of them.DON'T install on drywall, plaster walls and cavity. Full instructions & all mounting hardware are included.
• Best Gift：This chin -up bar is a best gift for your friends and relatives who loves fitness.We offer you 100% risk-free satisfaction to let you buy with confidence.Any questions,feel free to contact us,we will help you deal with it.

User questions & answers

Question:	Are there two sets of hooks? One set for pull ups and one for dips? Since its different hights for each
Answer:	Technically speaking as long as the wood is strong enough to hold your weight I wouldn't see why not. I actually had to use a piece of wood to make a frame as I could not get the mount to stay flush against my wall so mounted it to the wood than to the wall. I weight approx. 190 lbs and it is able to handle my weight no problem.
Question:	How far vertically are the hooks supposed to be separated
Answer:	Look online for the instructions. Otherwise get a piece of 2x12 wood about 36” long and fasten that to wall studs at the height you prefer, and then bolt the rack to that and your good to go.
Question:	How do you get an extra pair of mounting hooks
Answer:	I would talk to amazon as if it is an issue with the delivery that is not your fault and technically if there was no signature given then you should not pay for something you didn't receive and the shipper should have required a signature. I would also try to contact the vendor/shipper, not the carrier. Sometimes the vendor/shipper is more reasonable than both amazon and carriers.

• 【Heavy Duty Steel Construction】This pull up bar is made of heavy duty steel, a black powder coating to prevent rust and corrosion. Its solid material and durable construction ensures its stability and durability.
• 【440 lbs Weight Capacity】Due to its superior material, this pull up bar has 440 lbs weight capacity. Overall Size after assembly: 38.2’’ x 19.7’’ x 7.1’’(L x W x H).
• 【Padded Handles】Its two handles paded with foam to prevent your hands from grasp hard steel tube directly, which brings better exercising experience.
• 【Multifunctional】Perfect for exercising your backs, shoulder, chest, arms, triceps, biceps, lats, and the front of your abs.
• 【Easy to Assemble】All mounting hardware and clear instruction are included for quick and easy installation. No extra professional tools are needed. It can be easily set up.

User questions & answers

Question:	Can I install on cardboard walls
Answer:	A little. I’m 230 lbs - takes quite a bit of a kip from me so I don’t go full motion but can cycle through a few at a time.
Question:	Can I mount this to a cinder block wall
Answer:	Dear customer, In current,this item is out of stock. The container will arrive at our warehouse within 7 days. Please feel free to pay attention. Thank you.
Question:	Can I mount this in a bedroom with sheetrock walls
Answer:	It can be placed in any width up to 50 inches. Has 2 brackets with a rod that slides between.
Question:	How far is the horizontal bar from the wall once mounted
Answer:	Please refer to product pictures, and if your weight or power do not fall in the resistant range of the bands included, you might need to purchase another band set.

• Multiple Grip Positions -- You can grip this pull up bar in the wide, parallel or narrow position. Allow for a variety of angles to workouts. Anti-slip handles provide comfort when you are exercising.
• Strong Suspension Anchors -- Additional training accessories are attachable: punch bags, TRX strap, power ropes or yoga straps (not included), to offer countless possibilities for your exercises.
• 440 LBS Weight Capacity -- 38" pull up bar allowing you to grip it in the wide, parallel or narrow positions. Knurled non-slip hnadle provides comfort as you do push-ups, pull-ups, chin-ups with multiple grip positions, tricep dips, vertical knee raises, and much more.
• Wall Mounted Ergonomical Design -- The pull up station has a 2” high density back cushion support and arm rest, effectively reduce the pressure on spine and elbow, and provide comfort as you workout your abdomen, waist, chest, and upper body.
• Wall Mounted Requirements-- Concrete wall or brick wall is suggested for mounting this pull up bar and dip station. DON'T install on drywall, plaster walls and cavity.

User questions & answers

Question:	Is the metal ring able to support a climbing rope
Answer:	Yes, there are two sets of hooks. You will need screws to install them though.
Question:	How do I mount these weird screws into the wall
Answer:	The upper hook is recommended to be higher than your height, and the lower hook higher than your abdomen.
Question:	What are the required dimensions to install the mounts?The length of each mount & space between the 2 sets.How much space is need to chg the position
Answer:	We have not matched additional hooks at the moment, we will consider your suggestions.Thanks.
Question:	Instead of attaching a whole piece of plywood to my drywall, is there a way to put some sort of bumper on the unit itself to protect the wall
Answer:	It can. It comes with the screws and the anchors, but you need the tools to install it.

Product features

Multifunctional Wall Mounted Pull Up Bar

PULL UPS

DIP STATION

HANGING LEG RAISE

NEUTRAL -GRIP PULL UPS

Wall Mounted Requirements

The product should be installed on the Concrete brick/ solid cement wall/ solid red brick wall / solid tile wall.

You'd better not install the product on hollow brick wall/ honeycomb brick wall /drywall /sandwich panel.

Wall Mounted Requirements

Or you can purchas the lumber and cutting them into 2~4 pieces to be secured to the wall using wood stud screws. And then install this product.

Wall Mounted Requirements

Or you can mounted this product in plywood then mounted the plywood to the wall.

Product description

Feature:

✔ Easily replaces different expensive exercise machines: power tower pull up station, pull up bar free standing, multi grip pull up bar and dip stands.

✔Portable pullup bar has a practical and compact design, can be fitted anywhere at home, gym, garage, basement or even backyard.

✔Pullup bar wall mount can support many kinds of sport exercise upper body and abs like pull-up, dips, sit-ups, push-ups, leg and knee raise and more.

✔This multi gym machine for home is made of heavy duty steel. One piece solid construction ensures stability and durability.



Wall Mounting Recommendations:

1.The product should be installed on solid cement wall, solid red brick wall or solid tile wall.

2.You’d better not install the product on hollow brick wall, honeycomb brick wall and sandwich panel.

3.It is advised that the parallel bar should be fixed at height of 50-60CM.

4.Do not tighten all screws at the time of installation, tighten them after complete installation.

5.The unilateral load-bearing is 150KG, with 300KG on both sides, and the load is ultimately determined by the robustness of the wall.



Dimentions:

✔ Pullup bars from wall: 17 in (43 cm)

✔ Wide grip: 38,6 in (98 cm)

✔ Dip bars from wall: 29,5 in (75 cm)

✔ Between dips: 20,5 in (52 cm)

• Multi-purpose Pull&Dip Machine: Designed with strong hooks, ANTOPY multifunctional home gym equipment can be turned into dip bar easily.Wall mounted chin up bar can support many kinds of sport exercise like pull ups, chin ups, dip station, leg raises and boxing.
• Strong Stability&Ergonomic Design: Made of heavy duty steel with high density non-slip grips and padded back and armrests, home workout equipment offers great stability and rigidity and provides comfort as you do strength training. Supports to up to 440 pounds.
• Multiple Non-slip Grip Position: You can grip this pull up bar in the wide, parallel or narrow position. Allow for a variety of angles to workouts. Anti-slip handles provide comfort when you are exercising.
• Added Strong Suspension Anchors: Additional training accessories are attachable: punch bags, TRX strap, power ropes or yoga straps (not included), to offer countless possibilities for your exercises.
• Wall Mounted Requirement：Be it concrete, brick on cinder blocks, you can install the bar on any of them.DON'T install on drywall, plaster walls and cavity. Full instructions & all mounting hardware are included.

User questions & answers

Question:	How do I install this
Answer:	2 seconds!
Question:	How quickly can you change from dips to the pull up configuration
Answer:	We're so sorry that we are unable to send you the paper instruction before receiving your order. Could you please contact us directly? You could send us email about the instruction and then we can send you the electronic installation.
Question:	Are there installation instructions that can be obtained prior to delivery? I need to prepare a wall to ensure it will adequately support the product
Answer:	it includes 4 hooks.
Question:	How many hooks does this include 2 or
Answer:	It will almost certainly crush the drywall and then become loose. You can get 1/2" spacers or a pile of washers to build it out, or you can put a slug of 1/2" plywood the size of the hook over the stud after removing the same size of drywall. Remember too that the drywall under the pivot point (the part that hangs down) will similarly be crushed.