11 best paintball replacement parts

Product description

Great upgrade for target shooting or weekend battle at your paintball field. Superior performance with both regular Paintballs and First Strike rounds. Super accurate performance and aggressive tactical look for your paintball marker. Tactical matte Black anodize finish Durable light weight aluminum Weight:4.7 oz Features: Micro polish honing for ensure an accurate performance, new rifle internal milling to hit your target with one ball. .689 Bore size, you can use any brand of Paintballs with our barrels. TRINITY rifled barrels are gun-drilled barrels that incorporate conventional rifling to enhance ball rotation for improved ball flight and unmatched accuracy. Our tactical aluminum red dot sight features: LED (Light Emitting Diode) 100% Safe for the Eyes Unlimited Eye Relief for flexible mounting 24.0 X 34.0 mm Objective Lens Standard On/Off Switch Uses CR2032 Battery (included) Black Anodized Aluminum Construction Magnification:1X Reticle: Red dot Dot Size: 3 MOA Objective Lens: 24 X 34 mm Lens Coating:Platinum Length:4.6" Width:1.5" Height:2.1" Weight:3.9 oz.

• One of the best upgrades for target shooting or weekend battle at the paintball field.
• Superior performance with both regular Paintballs and First Strike rounds.
• Tactical aluminum red dot sight, unlimited Eye Relief for flexible mounting
• Micro polish honing for ensure an accurate performance, new rifle internal milling to hit your target with one ball.
• TRINITY rifled barrels are gun-drilled barrels that incorporate conventional rifling to enhance ball rotation for improved ball flight and unmatched accuracy

Product description

A perfect tank for any paintball marker that operates on High Pressure Air. This Empire Paintball 48cu/3000 PSI tank is Made In The USA. Features: * Lightweight Aluminum DOT and TC certified cylinders "Made in the USA" * 3000 PSI fill capacity with an 800 PSI output pressure * User replaceable Bonnet

• Lightweight Aluminum DOT and TC certified cylinders "Made in the USA"
• 3000 PSI fill capacity with an 800 PSI output pressure
• User replaceable Bonnet

User questions & answers

Question:	Does the mad dog remote coil work with this because mine is not doing anything when I hook it up not even wen I press nipple on top
Answer:	What I did was, instead of pushing the straw into the cone attachment, I pushed the straw *out* of the cone attachment, then attached the merged units onto the duster. Hope that helps.
Question:	What connectors does this use? For refill and for output
Answer:	No, it is not ESD safe, but can be used if careful. The material is plastic which is an insulator that holds a charge. We are talking potentially thousands of volts! Keep the nozzles at least a few inches away from the motherboard or any electronics, spray from a distance, this is a powerful blower so it still works great. Never use the brushes on anything internal, only use them on case exterior, keyboard, etc.
Question:	Am I going to die if I put this on a mini gs
Answer:	The amount of pressure is very close to canned air, just a bit less than a full can of air. There is no build up limit, the power reaches 100% upon flipping the "On" switch. There are 2 speeds.
Question:	Does it use compressed air
Answer:	No you don’t need to remove the fans. They need to be blown out also. Just make sure you unplug the power before blowing it out.

Product description

The ball latch is a part of the Tippmann marker that prevents paintballs from rolling out of the barrel before being fired. If you are having an issue where balls are rolling out of your barrel when you aim the marker downward, it means that you need to replace your ball latch. Ball latches eventually wear down or break off and need to be replaced.

Tippmann Part Number FA-18 (also called TA45010 or 72211)

Compatible with the following markers:

PMI: PCS US5

Tippmann: 68-Carbine, 98 Custom, 98 Custom ACT, 98 Custom Platinum Pro, 98 Custom Pro, A-5, Cronus, FT-12, Gryphon, Model 98, Pro-Am, Pro-Carbine, Pro-Lite, TPX Pistol, Triumph EXT/XL/XT, X-7, X-7 Phenom

US Army: Alpha Black Basic/Elite/E-Grip, Carver One, Carver One w/ E-Grip Project Salvo

This item includes a one year warranty against defect from Captain O-Ring LLC. "Captain O-Ring" is a registered trademark of Captain O-Ring LLC.

• Replaces Ball Latch on Tippmann markers
• Flexible, Durable rubber makes for a longer lasting ball latch
• Prevents balls from rolling out of the marker's barrel
• Fits Tippmann 98 Custom, Model 98, Custom Pro, A5, X7, and more (see below)
• Manufactured and Warrantied by Captain O-Ring LLC

User questions & answers

Question:	will this fit the project salvo
Answer:	Thank you for your question, this hose is use to refill co2 from large co2 tank to small co2 tank.
Question:	Can this fit in a tippmann A
Answer:	depending on the airgun, you may need a proprietary nipple to connect this to your gun. this has a quick connect on the end to connect to any of those nipples. my gamo urban came with its own nipple that fit straight into this filler
Question:	Cronus uses this detent
Answer:	No check valve. You want a " dead head " to go with this charging kit.
Question:	what do I need to do have not received
Answer:	This connects to a SCUBA tank "J" valve to fill a paint ball gun. Paintball takes at least 900 psi.

Product description

Pick up some ninja power with blackout screw kits by Captain O-Ring. Replaces all external visible screws on your marker. This kit includes a cap headed socket hex screw to replace the thumbwheel top feedneck screw that is included with your marker.

Note: This kit includes standard short and long feedneck screws. The long feedneck screw replaces the thumb wheel screw on certain Eclipse markers that come with a thumb wheel feedneck screw.

• Includes all visible screws on your marker
• Compatible with Eclipse CS1, CS1.5, CSL, CSR, Ego9, Ego10, Ego11, Etek3, Etek4, Etek5, Etha, Etha 2, GEO, GEO 2, GEO 2.1, GEO 3, GEO 3.1, GEO 3.5, GTEK, GTEK 160R, GSL, LV1, LVR
• Includes Grip Screws, Eye Cover Screws, Feedneck Screws, and Frame Screws
• Pick up some ninja power with blackout screws by Captain O-Ring

User questions & answers

Question:	How is the quality and the anno on the screws? is it the same as captain o-ring color accent screw kit, heard lot of bad stuff for that product
Answer:	If it is the aux air fitting for adding on a Cyclone Hopper, no it is not included, but all the interior rubbery bits are.
Question:	How is the quality of the screws and anno? is it the same as captain o-ring color accent screw kit, heard lot of bad reviews of that one
Answer:	Ratchet mech ??? Just orings ,some springs ,and some small screws .. it's basically a field kit for you marker
Question:	Will this fit on the LV
Answer:	Yes, internally the 98 Custom and Alpha Black are very similar. Some of the external pieces like body screws and nuts might not work, but the internal parts should be compatible.
Question:	Will these fit on an emek
Answer:	Short Answer: Yes it does have a drive spring. I haven't opened yet but here is list of what is included: 1 Front Bolt O-Ring, 1 Rear Bolt O-ring, 1 Buffer O-Ring (aka Joint Tampon in French....Ewww...Cheech and Chong would have a field day with that one), 1 Ball Latch, 1 Adapter Nut (10-32), 1 Receiver Bolt, 2 Grip Nuts, 1 Dowel Pin (Black), 1 Pin, 2 Valve Lock Screws, 1 Front Sight Spring Receiver Dowel, 1 Drive Spring (that's the ticket), 1 Velocity Screw (there's a joke there too), 2 Receiver Bolts (Short), 1 Feed Elbow Dowel Pin, 1 Front Sight Pin, and, last but not least, 1 Marker Oil. Hope that helps and good luck refurbishing your marker. Dave
Question:	Will this elbow fit a tippmann bravo one elite
Answer:	Yes. The project salvo uses this ball latch.
Question:	Will this elbow fit a tippmann bravo one elite
Answer:	Yes, these fit in the Tippmann A5, 98 custom and the X7.
Question:	Will this work for a tippmann model
Answer:	Yes, this is the ball detent that the Cronus uses.
Question:	Does this have the bolts to mount it to the gun
Answer:	Hello. This item is shipped directly from Amazon’s fulfillment centers. Please contact Amazon customer service and they can help with tracking or sending a replacement.
Question:	Does it includes o rings for the banjo fitting assembly
Answer:	Both o-rings can use on the bottle neck.
Question:	Does it have a ratchet mechanism
Answer:	Product specifications (Only cylinder): 3 liters capacity, 116mm outside diameter, 453mm length, 2.2KG net weight, 30Mpa/4500PSI service pressure.
Question:	Will this kit work for the alpha black gun
Answer:	I am not able to tell what is needed by the picture. That in itself is a minor problem as I see no DOT labeling in the description. Please understand the laws covering HAZMAT devices of which this cylinder is. Look at the label on the cylinder if there is no DOT marking then the cylinder it is NOT LEGAL to fill or transport in the United States. EN and CE are European markings and have no legal standing in the US. It cannot be legally filled in this country.
Question:	Does it include a drive spring pin
Answer:	I have had10 plus for my umarex 22 cal.

Product description

The ball latch is a part of the BT marker that prevents paintballs from rolling out of the barrel before being fired. If you are having an issue where balls are rolling out of your barrel when you aim the marker downward, it means that you need to replace your ball latch. Ball latches eventually wear down or break off and need to be replaced. This latch fits all standard BT4 markers, and can be cut to fit Tippmann markers. It's unique double sided design allows each piece to be turned over and reused when one side wears out.



What to expect:

This item includes five BT Ball Latches in a resealable zip-top poly bag with "Captain O-Ring" branded packaging.



Manufactured and warrantied against defect for one year by Captain O-Ring LLC. "Captain O-Ring" is a registered trademark of Captain O-Ring LLC.

• Replaces Ball Latch on BT4 markers
• Easily cut to fit Tippmann Markers
• Prevents balls from rolling out of the marker's barrel
• Contains 5 pieces
• Flexible, Durable rubber makes for a longer lasting ball latch

User questions & answers

Question:	will it fit in a jt raider
Answer:	Yes it should fit they are all basically the same body casting.
Question:	The discription says that it needs to be cut down for tipman. is it refering needing to be cut in half or is this actually longer then the tipman
Answer:	Yes, this will work on a Tippmann Model 98.
Question:	Will fit the bt omega paintball gun
Answer:	Yes it’s all one piece. Just put the two pins into the holes line them up and slide them in then push the hopper holder upwards til you hear a click .

Product description

Your marker can fire thousands of rounds every week, puts up with the beating of countless rainy Sundays, and withstands a number of slides through the dirt and mud. Through all of this, you still expect your marker to perform week in and week out. A small bit of maintenance is key to ensuring that your marker functions and performs at its best. One major aspect of marker maintenance is replacing your o-rings. The o-rings in your marker wear down over time by withstanding thousands of cycles along with coming in contact with dirt/debris. Our kits provide an easy and inexpensive way to keep your marker in top shape by swapping out your o-rings. Note: The product image associated with this item is a sample only. Your will receive the kit for your specific marker that you order which will contain the o-rings needed for that marker.



This 3x kit for the Tippmann 98, A5, X7 (Non-Phenom), FT-12, Gryphon, Triumph, US ARMY Markers Includes the following o-rings:



Safety Oring (x6)

Cylinder Reset O-Ring (x3)

Gas Line O-Ring [Gryphon] (x6)

Gas Line O-Ring [Triumph] (x6)

Gas Line O-Ring [X7] (x3)

Valve Seat O-Ring (x6)

Valve Plug / Valve Seat O-Ring (x6)

Front Bolt O-Ring (x3)

Gas Line to Tombstone O-Ring (x3)

Barrel O-Ring (x3)

Rear Bolt O-Ring (x3)

Valve Body O-Ring (x3)

Valve Body O-Ring (x3)

Tombstone Seal Valve (Large) O-Ring (x3)

Buffer O-Ring (x3)

Receiver O-Ring (x3)

Barrel O-Ring (x3)

Buffer O-Ring (x3)

Barrel Adapter O-Ring (x3)



Also available in our signature 5x COLOR CODED divider box o-ring kit: amzn.com/B00FEXUTYU



Parts include a one year warranty against defect by Captain O-Ring. "Captain O-Ring" is a registered trademark of Captain O-Ring LLC.

• O-rings are color coded by size, eliminating the headache of matching up sizes.
• Included color/size chart helps with your first time rebuilding your marker. After that, just replace orings by color when it comes time to rebuild again.
• All of the o-rings you need to perform a standard rebuild of your marker three times (other quantities available).

User questions & answers

Question:	Are these O rings made of urethane
Answer:	Well, they are plain black screws, that look as if they have the potential to rust. Other colors may just be plated. Do not know. The original screws are stainless steel with locktite patch. These don't come with that, and the set I recieved did not come with a thumb wheel feedneck screw. If you buy these, save your old screws and swap back before you sell the marker. The original screws seem to be better quality.
Question:	How many come in each package
Answer:	Yes this will fit an Lv1.5.
Question:	Will this kit work for an old 32 degree - rebel LE marker
Answer:	Hello. Yes it will :-).
Question:	Does this kit include the valve inner o ring
Answer:	It should .

Product description

Your marker can fire thousands of rounds every week, puts up with the beating of countless rainy Sundays, and withstands a number of slides through the dirt and mud. Through all of this, you still expect your marker to perform week in and week out. A small bit of maintenance is key to ensuring that your marker functions and performs at its best. One major aspect of marker maintenance is replacing your o-rings. The o-rings in your marker wear down over time by withstanding thousands of cycles along with coming in contact with dirt/debris. Our kits provide an easy and inexpensive way to keep your marker in top shape by swapping out your o-rings. Note: The product image associated with this item is a sample only. Your will receive the kit for your specific marker that you order which will contain the o-rings needed for that marker.

• O-rings are color coded by size, eliminating the headache of matching up sizes.
• This 360 piece Players Kit LRG contains 18 of the most common sized o-rings found in paintball equipment (20 of each size)
• Keep the o-rings on hand to replace seals in a variety of paintball equipment including your marker, to your air/CO2 tank, and other accessories requiring o-rings.
• Kit includes o-rings sorted by size/color in individual compartments.

User questions & answers

Question:	How do you know if it is a nbr70 or nbr90 o-ring
Answer:	Mine stays on all night
Question:	Will this kit have the o-rings needed for the dye rize czr
Answer:	I wouldn’t, this will cause pump issues. The oil will create residue that can’t be cleaned from the pump.
Question:	Does it wotk for tippman
Answer:	I bought this about 2 months ago and it does splash out droplets. Ive kept clean shiny surfaces next to it and after a few days its all covered in dried water spots. So it does to an extent. I had to take it off my bookshelf because of this :(
Question:	Is this compatible with a CS
Answer:	NO

Product description

Keep your paintballs from double loading. Tippmann Paintball Ball Detent - Orange This is what holds the balls in the breech and keeps them from rolling out of the paintball barrel in between shots. This fits All 98 Custom, Model 98, Custom Pro, All A5,

• FA-18 x 3
• Orange
• 3 Pack
• OEM soft plastic construction

User questions & answers

Question:	Will this fit my alpha black
Answer:	Yes. This ball latch will work with the JT Raider.
Question:	How often do you need to replace these and will these fit the cronus
Answer:	Hello,To fit a tippmann, you can simply cut off one of the arms. However, we also sell Tippmann ball latches if you only need them for the Tippmann.
Question:	Will they fit Tippmann pro carbine
Answer:	Yes
Question:	will these fit my project salvo
Answer:	There 100% fine. I’ve had mine on my lv1 for 6 months and they still look new

Product description

Specification:

Hose material: Stainless steel

Hose length: 36 Inch/90cm

Working pressure: 3000 PSI

Thread For Large CO2 Tank: CGA320

Fits soda stream tank thread: TR21-4



Package Included:

1 x 36 Inch Stainless steel braided hose refill station with gauge

1 x Bag of fittings

1 x Operation instruction



Attention:

1.Please read the instructions before use.

2.Big CO2 tank (donor cylinder) should have enough pressure, if it is liquid CO2, invert the big tank to inflate.

3.If the small tank still cannot be inflated even follow the instructions to operate, we recommend replacing the thin thimble tank.

Inflatable Steps:

1.Place the gasket in the refill connector,confirm the On/Off and Release valve are closed, rotating the pin switch of small cylinder to the top.

2.Connect the fill station connector to the big bottle and connect the small cylinder to the soda stream Co2 adapter.

3.Close the release valve and open inlet valve.

4.Rotate the pin switch of the adapter clockwise to the bottom to allow gas to enter the small cylinder.

5.After fulling of gas by the small cylinder, contrarotate the pin switch to the highest position and close the inlet valve.

6.Open the release valve and exhaust the excess gas in the hose.

7.After inflating, unscrew the small cylinder.

!!! ❌ Can not be used on paintball CO2 tank.

• 🌝Specification: WADEO 36 Inch stainless steel braided Hose Dual Valve with Gauge, the hose's work pressure is 1500 PSI and the gauge is 3000 PSI, Thread for large CO2 tank is CGA320 and thread for soda stream tank is TR21-4.
• 🌝Built-in Pressure Gauge: The product is equipped with pressure gauge, can clearly see the gas pressure range, the pressure control in a safe range.There are two on/off valves in our product, one is to control CO2 from the large cylinder into the small cylinder, and the other is to release the excess gas after filling.
• 🌝Easy to Install and Please remember to use a spanner to tighten the connector to avoid leakage.
• 🌝Attention: Please read the instructions before use; The big CO2 tank (donor cylinder) should have enough pressure, if it is liquid CO2, invert the big tank to inflate; If the small tank still cannot be inflated even follow the instructions to operate, we recommend replacing the thin thimble tank. ❌ Can not be used on paintball CO2 tank.
• 🌝When the stainless steel braided Hose expands, check that the thimble of the vial is too thick to inflate. If so, replace the thin thimble bottle,then you can use it in normal. (Or contact us)

User questions & answers

Question:	How many on-off valves does the CO2 refill station connector kit have
Answer:	Hello, these color o-rings are made of buna nitrile.
Question:	What is the work pressure
Answer:	This kit includes 72 o-rings. It covers everything needed to rebuild the markers listed in the title three times.
Question:	Are there any precautions during installation
Answer:	Hello. This will most likely not have everything you need. Your best bet for the 32 Degrees Rebel would be our Players Kit Jr: https://www.amazon.com/dp/B00FEXYMWA
Question:	Will both side fit the 5lb 10lbs bottle im trying to fill a 5lb with my 10lb bottle
Answer:	Hello. Yes it does. The small blue 012 o-ring (two of them) are used inside your valve.

Product features

Inflatable Steps:

1. Place the gasket in the refill connector,confirm the On/Off and Release valve are closed, rotating the pin switch of small cylinder to the top.

2. Connect the fill station connector to the big bottle and connect the small cylinder to the soda stream Co2 adapter.

3. Close the release valve and open inlet valve.

4. Rotate the pin switch of the adapter clockwise to the bottom to allow gas to enter the small cylinder.

5. After fulling of gas by the small cylinder, contrarotate the pin switch to the highest position and close the inlet valve.

6. Open the release valve and exhaust the excess gas in the hose.

7. After inflating, unscrew the small cylinder.

Product description

Up your paintball game with the Maddog 4+1 Harness Package from Zephyr Sports. This kit starts with the comfortable, adjustable 4+1 paintball harness that holds four pods and one bottle. It also comes with four 140-round pods (color may vary) plus the standard remote coil that provides easy disconnect and features a flexible style to allow for outstanding range of motion. You can use this harness with either HPA or CO2 and just about any standard paintball marker, as long as it has an ASTM compliant threaded interface.

• High-Performance Paintball Harness Constructed from Cordura, this paintball harness holds four pods and one bottle up to a 68ci N2 tank (not included)
• Compatible Design Works with most paintball markers and can be used with both HPA or CO2; Features an adjustable waist for a custom-like fit
• Heavy-Duty Remote Comes with the Maddog Standard Remote Coil that removes bulk from your gun and allows for quick, easy and uncomplicated disconnect
• Great Features Finished with a 3,000-PSI working pressure and features an ASTM standard male adapter; Fits any marker with an ASTM compliant threaded interface
• Complete Package Includes the 4+1 paintball harness plus four pods and the standard remote coil for an all-in-one package to save you money

User questions & answers

Question:	Does the remote line work with a compressed air tank
Answer:	That is what I use, so yes.
Question:	Doee it works with co
Answer:	Yes. It works with Co2.
Question:	Does it come with pods
Answer:	Y es It Does!!!!
Question:	Does it come with a compressed air tank
Answer:	No tank

Product description

Includes all of the parts needed to fix common HPA tank issues that arise at the field. All parts are encased in a small plastic hinge-top box. Don't get stuck at the field without a working tank. Pick up a Tank Repair kit by Captain O-Ring today!



Includes:

Fill Nipple

7.5k Burst Disks

5k Burst Disks

1.8k Burst Disks

(10) Polyurethane Tank O-Rings (90 durometer)

015 Bottle Neck O-Rings

112 Bottle Neck O-Rings

Captain O-Ring Branded Flambeau Hinge Top Plastic Divider Box



This item is warrantied for one year against defect by Captain O-Ring LLC.

• All of the parts needed to quickly fix unexpected paintball air tank issues.
• Includes Fill Nipple, 7.5k Burst Disk, 5k Burst Disks, 1.8k Burst Disks, (10) Tank O-Rings & of each size regulator-to-bottle o-rings
• Includes one year warranty by Captain O-Ring

User questions & answers

Question:	I need the o ring that goes between a custom products regulator and the bottle. Do you sell those with out the fill nipples and burst disks
Answer:	Yes
Question:	Are these universal for HPA tanks
Answer:	Not too sure but you will know when the balls just fall out of the barrel
Question:	What kind of burst disks are they? first strike, ninja or "captain o-ring"? need to replace a valken zero g 1.8k burst disk
Answer:	The part numbers are the same, so they should work.
Question:	Will this work with ninja HPA tanks
Answer:	Yes, they will.