10 best gun scope with rings

Product description

UTG 4X32 1" Hunter Scope, Mil-dot, Air gun Rings, Adj@35 Yds. Features: - Built on True Strength Platform, Completely Sealed and Nitrogen Filled, Shockproof, Fog proof and Rainproof - Premium Finger Adjustable Target Turrets with the Most Consistent and Precise 1/4 MOA per Click Wind age/Elevation Adjustment - Sapphire Coated Lenses to Achieve Maximum Light Transmission for the Best Clarity - Mil-dot Range Estimating Reticle for the Most Optimal Aiming and Shooting Performance - Parallax Pre-adjusted at 35 Yards - Fixed Power: Magnification of the scope is fixed - Integral Sunshade: Tact Edge Angled objective providing a built-in, integral sunshade Includes: - Medium Profile . 22/Air gun Rings - High Quality Flip-open Lens Caps Specifications: - Magnification: 4X - Reticle: 9 Dot Wire Mil-dot - Tube Diameter: 1" - Objective Diameter: 32mm - Field of View @ 100 yards: 32' - Eye Relief: 3. 4" - Exit Pupil: 8mm - Click Value @100 yards: 1/4" - Length: 310mm - Weight: 13. 1 oz. - Parallax Setting: 35 Yds.

• Built on True Strength Platform, Completely Sealed and Nitrogen Filled, Shockproof, Fog proof and Rainproof
• Premium Finger Adjustable Target Turrets with the Most Consistent and Precise 1/4 MOA per Click Wind age/Elevation Adjustment
• Sapphire Coated Lenses to Achieve Maximum Light Transmission for the Best Clarity

User questions & answers

Question:	Would this fit on a daisy powerline
Answer:	The 2500mah weights is 3.2 oz and is 1 1/16 inch wide. Hope this helps
Question:	Will it fit on a crossman ii fury blackout w/break barrel
Answer:	I guess because they are decorating it as a holiday tree using gingerbread cookie recipe. COmes with graduated sizes so you can make whatever size tree you want. You can also decorate to look like any kind of tree.
Question:	does the mount fit 11mm rails
Answer:	es there is a recipe for the cookie & Icing
Question:	Does it come with Scope Rings/mount
Answer:	Smallest star is 2" side to side & 1-1/2" top to bottom & largest star is 7-3/4" from side to side & 6-3/4" top to bottom

• ☑ Double scope ring mount for Picatinny/ Weaver Rail (21mm).
• ☑ Design in see-through style, provide potential visibility for open sights, meanwhile hollowed-out configuration helps to release heavy duty when clamping your scope.
• ☑ Built-in tape inside per rings to prevent from marring the scope, also prevent sliding and holding postion accurately.
• ☑ The ring is for most scopes which are in 1''/ 25.4mm scope tube. Medium profile, 0.5'' gap from base of mount to bottom of ring. ( Item height: 1.9'')
• ☑ With 1 rail clamp screw and 2 scope clamp screw per side, ensure mount any 1'' scope firmly, just twist off the nut and mount the base on the 20mm rail easily.

User questions & answers

Question:	Will this mount on a marlin xl
Answer:	It should with std rails
Question:	what do you thing of this product
Answer:	Yes it will fit, the mount comes with polymer inserts for different sized tubes.
Question:	Will these rings handle the recoil of a .300 win mag. the rifle does have a muzzle break. Brings the recoil down to less than 30-06 levels
Answer:	This mount detachable 30mm rear ring with 1 inch inserts.For use with riflescopes of both 30mm and 1 inch main tube.
Question:	Are these fit 20mm rail
Answer:	As long as you have either a picatinney, dovetail, or standard rail that is 3" it will fit, If it is shorter than 3" you will need a rail adapter.

Product features

If you are a avid hunters and shooting sports enthusiasts, the Modkin Scope Mounts are essential pieces of equipment for you.

• Fits all 21mm picatinny and weaver rails.
• The ring is for most scopes which are in 1''/ 25.4mm scope tube.
• Built-in tape inside per ring to prevent from marring the scope, also prevent sliding and holding postion accurately.
• With 1 rail clamp screw and 2 scope clamp screws per side, ensure mount any 1'' scope firmly, just twist off the nut and mount the base on the 21mm rail easily.
• Precision and Repeatable Alignment.

Adventure

Training

Hunting

• 【Perfect for All 21mm Picatinny/ Weaver Rails】Modkin 4 Set of Different Heights 1 inch Scope Mount Rings Include 2 Pieces Medium Profile 2 Pieces High Profile In One Package. Our Scope Rings Perfect for All 21mm Standard Picatinny/ Weaver Rails, Available In Two Styles For Your Choice, A Must Have Scope Rings for Hunting Shooting! Perfect for Mounting Most Scopes Which Are In 1 inch / 25.4mm Scope Tube.
• 【Hollowed-Out Design & Built-In Tape Protection】Design In See-Through Style, Provide Potential Visibility For Open Sights, Meanwhile Hollowed-Out Configuration Helps To Release Heavy Duty When Clamping Your Scope. Built-In Tape Inside Per Rings To Prevent From Marring The Scope, Also Prevent Sliding and Holding Postion Accurately.
• 【Premium Aircraft Aluminum, Solid & Durable】Precision Machining of Aircraft Grade 6061 Aluminum Alloy + High Strength Steel In Black Matte Anodizing Finish, Sturdy & Lightweight Construction, High Quality, Sturdy Construction, Build No Wobble, Offer Durable Safe Performance In The Field.
• 【Rail Clamp Screw Design & Easy To Install】With 1 Rail Clamp Screw and 2 Scope Clamp Screws Per Side, Ensure Mount Any 1 inch Scope Firmly, Just Twist On/Off The Rail Clamp Screw Nut Via Allen Wrench and Mount The Base On 21mm Rail, Simple and Quick To Remove Or Install. Comes With 2 Pieces Allen Wrench.
• 【4 Set Of Two Styles 1 inch Scope Rings】2 Pieces Medium Profile - 0.5 inch Gap From Base Of Mount To Bottom Of Ring - Item Height 1.9 inch - Dimension: 1.9 x 1.6 x 0.8 Inch - Weight: 2 Ounce Per Ring; 2 Pieces High Profile - 0.71 inch Gap From Base Of Mount To Bottom Of Ring - Item Height 2.0 inch - Dimension: 2.0 x 1.6 x 0.8 Inch - Weight: 2 Ounce Per Ring.

User questions & answers

Question:	Will these fit a 32mm objective lens
Answer:	IF I AM RIGHT 1 LBS- 6 OZ, YOU CAN FEEL THE WEIGHT
Question:	Would this fit my savage 93 17hmr rim fire rifle
Answer:	A springer air rifle will KILL this scope. It will literally fall apart, mine did. This scope is a good value, but not for spring powered air rifles.
Question:	will these fit the henry ar
Answer:	A good way to set up your scope is to mount your scope and bore sight it. With a bolt action, remove the bolt, set the rifle in a gun vise (like a lead sled), set a target at 25 yards, look thru the bore and adjust the scope to same spot on the target that you see thru the bore. (With a lever gun or semiautomatic, you will need a laser bore site). Fire a shot at the target. You should be on the paper. Adjust the shot to the center of the target. Now set a target at 100 yards and fire a 3 round group. Adjust your scope to the center of the group and fire another shot. This should put you dead center at 100 yards. Follow the ballistics charts for your rifle caliber as a guideline for bullet drop and trajectory. There is no better way to find out what each mil dot represents than to fire your rifle at different ranges to know what yardage each dot will represent.
Question:	Can they fit on 20 moa mount
Answer:	How to mount it on a 7.62x54r

Product features

If you are a avid hunters and shooting sports enthusiasts, the Modkin Scope Mounts are essential pieces of equipment for you.

• Fits all 21mm picatinny and weaver rails.
• The ring is for most scopes which are in 1''/ 25.4mm scope tube.
• Built-in tape inside per ring to prevent from marring the scope, also prevent sliding and holding postion accurately.
• With 1 rail clamp screw and 2 scope clamp screws per side, ensure mount any 1'' scope firmly, just twist off the nut and mount the base on the 21mm rail easily.

• One Piece Scope Mount with Integral two 1" Rings
• 4 Clamping Screws,Fit 11mm Dovetail
• Fits all scopes with a one inch body tube, Full length 4 inch
• Threaded stop pin can be easily activated
• Great for use on high power magnum air rifles

User questions & answers

Question:	Were are all the mounts made of steel material
Answer:	Because our internal electronics are made of nano-waterproof material, Waterproof rating is IPX6，And each USB port is covered by a rubber cover for better protecting the from water
Question:	Will this fit my benjiman
Answer:	There is not a usb-c accessibility for this charger. And you would need an adapter if you wanted to go that route.
Question:	Will this mount fit a camo wildcat whisper rifle
Answer:	3.25" L x 2.25"W x 7/8" thick. Love that the cables are attached and the compactness. It surprised me how heavy it is. I keep it in my purse.
Question:	Will it work for 11mm dovetail ? Description is confusing , it mentions 11mm and
Answer:	I did not weigh it but it seemed very lightweight, probably a few ounces

Product features

One Piece High Profile Magnum Airgun Scope Mount

Fits all scopes with a one inch body tube ,Mounts onto 3/8inch dovetail rails or grooved receivers , Removable threaded stop pin is built in and can be activated easily , 4 Mounting screws give lots of clamping power and make the mounted scope firm and stay in place under recoil in every shooting situation , Full length of the mount is 4 inch ,Opening between two rings: 2 inch , Works with typical on air rifle scopes.

Package Include

1 x One Piece Mount

1 x Wrench

• -- One of the rings has a stop pin the bottom of it for rock solid application
• -- With four screws Design, it will hold the scope more securly than a single screw on both sides
• -- Scope Rings Type: Medium Profile (14mm),Fit for a .22 rifle or an air rifle using a 3/8" or 11mm dovetail mount
• -- Scope rings are for standard riflescopes 25.4mm scope tube
• Pack in Lirisy Exclusive design packing box,make it different and special,good gift to your boy friend,father,grandfather.

User questions & answers

Question:	Do these fit & work ok on a Henry 001 lever 22 or oo3T pump (dovetail rails
Answer:	It worked just fine for me. I would buy another one.
Question:	Will this fit the rail of a Ruger .177 pellet rifle
Answer:	I don’t think the rail will fit to the Chiappa !
Question:	will these fir a benjamin 342 air rifle
Answer:	The mount attaches to the rail with four screws. Each screw has a cleat that locks into the rail so I can’t imagine this mount would shift on the rail. Each of the scope rings has four screws and plenty of surface area to grip the scope. Even though it says “slim” it seems plenty strong enough for heavy recoil.
Question:	will these fit on a ruger american
Answer:	The height between the top of the base to the bottom of the scope rings is 1 inch, providing 1 inch of vertical clearance.

Product features

1" Scope Rings Fits 11mm Dovetail Rail

• Fit for a .22 rifle or an air rifle using a 3/8" or 11mm dovetail rail.
• The ring is for most scopes which are in 1''/ 25.4mm scope tube.
• Built-in tape inside per ring to prevent from marring the scope, also prevent sliding and holding postion accurately.
• With two mounting screws for the bases and four screws for each of the two scope rings. It will hold the scope more securely than a single screw on both sides.
• One of the rings has a stop pin the bottom of it for rock solid application

• Magnification: 6-24x
• Objective Diameter: 50mm
• Field Of View: 28 ft @ 100 yards
• Click Value: 1/8 inch @ 100 yards
• Illuminated Type of the rifle scope: Red and Green

User questions & answers

Question:	how much does this scope weigh
Answer:	I went with a 6-24×50 on my 110 tactical 308 and I asked vortex what ring I need for my seat up and they said to go with the med..
Question:	Will this scope work with an air rifle/pellet gun (specifically a Beeman RS
Answer:	I have rpr .300 prc with vortex viper 6-24x50 with these rings in medium and maybe 1/16 clearance I would go with high
Question:	how will the mildots work on my 7mm rem mag if i sight dead on at 100 yds
Answer:	Medium should work fine if your worried buy set of high it won't hurt
Question:	will it hold up to 7.62x54r
Answer:	Aligned, possibly, lapped, not even a little. I used the Wheeler kit, but only used the alignment bar, to ensure I had full contact. And I did. Lapping nowadays just isn't much of a thing.

Product features

Adjustable Objective (AO) lens

The adjustable objective (AO) lens can be moved by the parallax dial at the end of the scope. This adjustment allows for a sharper target image, elimination of parallax, and range estimation.

Adjustable Eyepiece

Eyepiece with dioptric adjustment lens eliminate most of image aberration，adjustable ocular provide a clear image for nearsighted or farsighted users without glasses.

Reliable Windage and Elevation

Well-designed and constructed turrets allow for crisp, consistent and precise windage and elevation adjustments, it can fast to adjust and the caps can be removed to reset the zero. Precise Hand-Turn 1/8-inch @100 Yards Click Adjustments,you can aim perfectly at any time.

Easy to Mount

Fits all standard 20mm Picatinny or Weaver rail

Product description

Weaver Quad Lock Detachable Rings off two straps and four screws provide added gripping power. The rings are lightweight and all-aluminum. Thumbscrews allow for quick detach. These rings feature the positive dovetail locking system and boast rear mount windage adjustments. They offer maximum strength in steel construction and top-notch recoil resistance for the ultimate hold on your scope. Weaver rings can handle any scope-mounting need. Whether you're looking for our classic Weaver's original cross-lock Top Mount, windage adjustable or dovetail extension rings; we have many great options. These rings are available in a variety of choices including aircraft-grade aluminum options or Grand Slam steel, and many more.

• Ring diameter: 1 inch
• Height: medium
• Finish: matte black
• Quadlock Detachable Aluminum Rings
• Two straps and four screws provide added gripping power
• Lightweight, all-aluminum rings
• Thumb screws allow for quick detach

Product features

WEAVER Quad Lock 1-Inch Medium Detachable Rings

These rings feature two straps and four screws for added gripping power for these lightweight, all aircraft aluminum rings.

Product description

UTG 1"/2 Pcs. Medium Profile Air gun Rings w/Stop Pin Features: - Precision Machined from Aircraft-grade Aluminum Alloy with Anodized Black Matte Finish - Complete with Stop-pin for Rock Solid Application - Ring Base Designed with Locking Hex Screws to Tightly Fit on Mounts with Air gun/. 22 Dovetail Dimensions - Reversible Locking Plate to Fit Full Range of Air gun/. 22 Rails Specifications: - Material: Aluminum - Weight: 1. 65 oz. - Pieces: 2 - Rail Type: . 22/Air gun - Profile Level: Medium - Ring Diameter: 1" - Ring Width: 21 mm - Max. Scope Outer Dia. : 53 mm - Screws Per Ring: 4

• Precision Machined from Aircraft-grade Aluminum Alloy with Anodized Black Matte Finish
• Complete with Stop-pin for Rock Solid Application
• Ring Base Designed with Locking Hex Screws to Tightly Fit on Mounts with Airgun/.22 Dovetail Dimensions
• Reversible Locking Plate to Fit Full Range of Airgun/.22 Rails

User questions & answers

Question:	Ruger Blackhawk Elite using a 3-9x40 AO scope, will rings be high enough so as to not let the 40mm front ao objective touch the receiver
Answer:	Yes, It work for your samsung E5. Yoobao power bank can compatible with almost any smart devices like iPhones, iPads, Windows smartphones, Android smartphones and other 5V input USB-charged devices.But please be aware that only micro usb cable comes with the power bank, so smart devices with lightning connectors (iPhone, iPad) or usb-c connectors(samsung galaxy s8, samsung galaxy s8+, lg g5, lg g6, etc) will need to be charged by your own cable.
Question:	does it fit 3/8 dovetail
Answer:	No just a micro usb cable for charging
Question:	Is the stop pin removable from the ring
Answer:	If you are asking about the input for charging the bank itself, it needs a micro usb, but if you put your iphone charger in the bank it will charge your phone.. Hope that helps
Question:	How long did it take to ship? Says 16-20 days
Answer:	It charges using a micro usb cable

• Dedicated scope mounting platform built specifically for the Ruger 10/22
• Scope rings mount directly to the Ruger 10/22 receiver via the factory mounting holes and included set screws with no additional hardware required
• 1 inch in diameter for precision mounting of standard 1 inch tube rifle scopes
• 1 inch in height with a see through base, allowing for simultaneous use of iron sights
• All Monstrum Tactical scope ring products come with a lifetime guarantee

User questions & answers

Question:	Do these come in a stainless finish
Answer:	Unfortunately we only offer these in a black anodized finish.
Question:	Will these fit 10/22 takedown
Answer:	Yes they will
Question:	Will these mounts fit myBSA sweet .22 39x40 scope
Answer:	Worked great for my 10/22 ruger, I could use my iron sights or scope...
Question:	Seems like the provided screws are a little too long and protrude into the receiver making contact with the bolt on my 10/22. Anyone else
Answer:	Yes I had the same issue...I used four screws from a picatinny rail that I had...works perfectly...or you could trim the screws

Product features

Light in Weight, Yet Strong and Durable!

Crafted from lightweight 6061 aluminum, each scope ring weighs in at a mere 1.5 ounces!

Fit Your Preferred Optics

Comfortably fit your favorite compact scopes, and even short-mid range rifle scopes on to your Ruger 10/22.

Optimized For Your Ruger 10/22 Rifle

The Monstrum 10/22 scope rings has been machined to match the curvature of the upper of your Ruger 10/22, which results in an OE fitment.

Have Immediate Access to your Ruger Sights

The hollow, high-profile design allows you to still use your Ruger sights while your optic is still mounted.

Product description

Product Info for Canis Latran Dovetail Riflescope Rings：

Canis Latran 30mm Standard Dovetail Scope Rings are a reliable pair of rifle scope rings that will give your precision sport optics a stable mounting platform, so you won't have to suffer through a loss of zero with every shot. These Canis Latran rings are built with a standard mounting profile, so you can mount almost any scope, large or small, effectively to the rings. With their durable aluminum construction, these rings can withstand recoil to stay sighted longer. Canis Latran has built the Canis Latran 30mm Aluminum Dove Tail Riflescope Ring Pack with a dovetail-style base that is compatible with plenty of different mounting platforms, secured by a reliable set screw. A black matte finish matches the rings with any firearm, and their 30mm diameter is ideal for most American rifle scopes and other types as well. Reliably mount your scopes using the Canis Latran 30mm Dove-Tail Standard Ring 2-Pack.

Specifications for Canis Latran Pair of Aluminum Dovetail Rifle Scope Rings：

Tube Diameter:30mm

Material:Aluminum

Finish:Black matte

Rings Per Pack:2

Type: Medium Profile (14mm)

Mount Type:Dovetail

Features of Canis Latran 2x 30mm Standard Dovetail Black Matte Scope Rings:

-Multi-purpose rifle scope rings by Canis Latran

-Reliably mounts any scope with a 30mm tube diameter

-Standard mounting height is versatile and will accommodate all but the largest scopes

-Dovetail mounting platform secured by a powerful set screw

-Keeps your scope zeroed

-Tough aluminum construction

-Black matte finish

-Two rings per package

-Backed by the Canis Latran 1-year limited warranty

Package Contents:

2 x 11mm Dovetail rail rings

1*Screw wrench

1*Threadlocker

1*Transparent Gif box

• With four screws Design: it will hold the scope more securly than a single screw on both sides
• Threadlocker Medium Strength Gift :The Update Process .The use of larger plum screw,torque greater ,firm ,anti-wear ,anti-deformation
• Complete Built-in tape inside per rings to prevent from marring the scope, also prevent sliding and holding postion accurately.
• Scope Rings Type: Medium Profile (14mm),Fit for a .22 rifle or an air rifle using a 3/8" or 11mm dovetail mount
• Scope rings are for standard riflescopes 30mm scope tube ,Two rings per package ,Backed by Canis Latran the 1-year limited warranty. Note: This scope mount rings are designed to be fit the scope within 30mm by allowing tolerance range, so the screw threads not finished and there is a gap between two clips, it's normal phenomenon.

User questions & answers

Question:	can they be used for a 22mag
Answer:	Not sure what kind of plug the zte phone has. The plug on the Yoobao is a standard android plug.
Question:	Will they work on a crossman air rifle
Answer:	There is 4 indicator lights on the side (next to the power button) that tells you, each light represents 25 percent charged. When all 4 are lit, it is fully charged.