13 best electric bike hub motor

Product description

Notice:

Battery and Charger are Not Included.

Battery Recommendation: Electro kinetic cell battery featured in nominal voltage 48v, nominal capacity 12 to 20Ah is compatible with the motor.

Must to wear a helmet before riding this electric bicycle for protection.

Please go to those automobile repair shop with standard business license for modification.

If you have any question about the compatible Model, please contact our Customer Service before purchasing.

Specification:

Overall Dimension: 25 3/16" x 13/16" (64 x 2 cm)

Axle Length: 6 13/16" (17.3 cm)

Front Dropout Spacing: 3 15/16" (10 cm)

Spokes Length: 6 5/16" (16 cm)

The Number of Spokes: 36

Controller Power: 1000W

Motor Power: 1000W

Motor Voltage: 48V

Motor Rotating Speed: 480 RPM

High Motor Efficiency: 80%

Net weight: 24.25 Lbs (11 kg)

Package Content:

1x 26" Front Wheel with Brushless Hub Motor

1x Electric Controller

2x Hand Brakes

1x Twist Throttle

2x Handle Grips

1x LCD Display

1x Pedal Assist Sensor

1x Controller Bag

1x Battery Connection Cable

1x Fuse Accessory

1x Rope

1x Set of Widing Pipe and Cable Tie

1x Manual

• 1000W 48V 26" Electric Bicycle Front Hub Conversion Kit, fit for 3 15/16" front dropout spacing, with a speed of 28 mile/h (45 km/h), make your bicycle an electric power moped, brushless hub motor for noiseless running, to fully enjoy the pleasure of riding.
• Dual Mode Controller - Motor works under Hall effect and non-Hall effect, extend life for electric bicycle (If the components break down, controller will switch into non-hall effect mode, the motor will still be working ).
• LCD for Data Display - Shows battery condition, speed, distance, PAS, trip time and error codes for troubleshooting, also cruise and assist promotion function can be turned on by operating the LCD display.
• Pedal Assist Sensor - To sense your pedal cadence and accordingly adjust motor turning rate, get power assistant without using throttle, great for a long-distance journey, avoid wrist pain from keep pressing Durable Frame - Aluminum alloy frame for durability and stability.
• Convenient to Use - Twist Throttle makes speed control as a breeze Hand brakes shut off the motor automatically to save energy and improve safety. Environmental Protection - Powered by battery, without carbon dioxide emissions.

User questions & answers

Question:	Will this work hydraulic dic brakes
Answer:	Yes it does matter which way you install it. Right way will drive forward and wrong way will drive backwards.
Question:	the pedal sensor will not fit my schwinn trike . is there another option
Answer:	Kit comes with a twist throttle which can be used independantly of the PAS. But remember, a front wheel drive can be dangerous, if the wheel torques itself loose while riding. I highly recommend a rear wheel drive and a torque arm.
Question:	Does it matter which side the tire’s power adapter is on
Answer:	I think it will be close. It really helps if your frame has the mounts else you might have to get creative.
Question:	Can I accelerate without pedaling, or is this a kit where I have to pedal in order to use the motor
Answer:	From what I understand, any 1500w 52v batteries are only good to use with any E-bike motors that are not rated higher than 1500w 52v and not lower than 500w 48v.

Product description

Specification:



High motor efficiency: >80%

Motor diameter: 245mm

Reinforced 32mm rim and 40mm tire

The motor dropout spacing is 135MM

Durable 600D Oxford cloth carrying bag along with a zippered main compartment for controller

It's for bicycle only.



Package Content:



1x 1000W 48V brushless hub motor

1x 26" Rear wheel (the whole wheel with tire!)

1x Electric controller

2x Brake pullers

1x Speed throttle

2x handlebar grips

1x LCD Display

1x PAS

1x Controller bag

1x Battery connection cable

1x Fuse

1x Rope (color will pick at random)

1set Widing pipe/Cable tie

1x Twist Throttle

1x Manual



Notice:



1. Must to wear a helmet before riding this electric bicycle for protection.

2. Please go to those automobile repair shop with standard business license for modification.

3. If you have any question about the compatible Model, please contact our Customer Service before purchasing.

4. Battery recommendation: Electro kinetic cell battery ( Li, lead-acid, NiMH battery etc.) featured in nominal voltage 48v, nominal capacity not less than 17Ah is compatible with the motor

4. We also provide high quality 48V 14AH Li-polyer Battery w/ Holder Charger For 48V 1000W Electric Bicycle. Search ASIN(B00XP53DH4) for more information.

5. Please note that the bike in the pictures is not included for demonstration only.

• LCD Display: to show battery power, time, speed, mileage and gears
• Pedal Assistance System (PAS): let you enjoy cycling while driving electric bike
• Dual Mode Controller: Motor works under Hall effect and non-Hall effect, extend life for electric bike
• Wheel Size: 26 Inch x 1.75 Inch; Top Speed: Approx. 45 KPH
• Complete wheel set: Reinforced 32mm rim and 40mm tire

User questions & answers

Question:	what should I pay attention to after I bought this kit for my bike
Answer:	You don't charge it. Pulling it backwards winds up the toy, then you just let it go and it takes off across the floor.
Question:	Do I have to use the included brake levers? My bikes has integrated gears levers with the brake levers so I can't replace them
Answer:	It goes a small distance on its own.
Question:	Can I run this at 24v 20ah
Answer:	Thank you for your question. Did you purchase this car from Amazon in December? We are shipping this car in blue and white as you see it in this photo currently. Feel free to call us directly if you have any other questions. Customer Service Kid Galaxy 800-816-1135 ext 103
Question:	How do you turn on cruises control
Answer:	Yes it will fit.

Product description

Please note, this item doesn't fit the bicycle that use the coaster brake.

This item is for the bike that uses the hub diameter less than 36mm.

Important:

This item doesn't include battery or charger.

Please see above video before you order this item,.

The install instruction video：https://youtu.be/2dDEep9pu2U

This is our newest kit for electric common bike, this kit mounts the sprocket on the wheel spokes, so it fits most of bicycle wheel.

Motor use freewheel so when wheel rotating, the motor will not rotate, just like a normal bike, this can reduce resistance.



The twist kit includes:

1. 1x 24V/36V250W brush motor with freewheel

2. 1x Chain

3. 1x Customized sprocket & components

4. 1x Motor controller

5. 1x Mounting plate + bolts

6. 1x Twist throttle (with battery indicator & key switch)





The thumb kit includes:

1. 1x 24V250W brush motor with freewheel

2. 1x Chain

3. 1x Customized sprocket & components

4. 1x Motor controller

5. 1x Mounting plate + bolts

6. 1x Wuxing thumb throttle (with battery indicator & switch button)





Motor with freewheel:

(with this freewheel, when you step pedal without motor power, the motor will not rotate, so reduce drag)

User questions & answers

Question:	I have 24v 18mah led.acid battery would it be okay? I need to know so i wont ruin my controller. Please i need se help
Answer:	Is correct 18 milliamp /hour or you want to say 18 amp. hour? no problem with controller,the motor take only the current that it need, don't forget put one fusse for protection.
Question:	Could this kit work with two 20 volt lithium batteries connected together makes 40 volt
Answer:	Assuming these are 5 cell , 20v “max” batteries, you will be fine. These batteries are 18v nominal. 2 in series is 10cells which is the standard Lithium Ion 36v pack configuration, used on ebikes, hoverboards, etc. The other answer that says you will overload the motor by simply using your suggested battery config is utter nonsense and shows no experience having actually done this, which I in fact have.
Question:	I purchased this 36V 250w left chain drive derailleur kit ,,, i received right side clockwise motor. now what ? help
Answer:	Yes, the motor rotates clockwise, so when you mount it on the bike left side, it can drive the wheel go forward. The right drive kit motor rotates anti-clockwise . You can see this link: https://youtu.be/2dDEep9pu2U
Question:	Can I swap the motor for a 500 watt one
Answer:	I have had several different wattage of these motors that we're interchangeable. To see a noticeable difference you have to upgrade the power supply and controller also. The motor most likely will bolt up to the bracket though.

Product description

Notice:

Battery and Charger are Not Included.

Battery Recommendation: Electro kinetic cell battery featured in nominal voltage 48v, nominal capacity 17-20Ah is compatible with the motor.

Must to wear a helmet before riding this electric bicycle for protection.

Please go to those automobile repair shop with standard business license for modification.

If you have any question about the compatible Model, please contact our Customer Service before purchasing.

Specification:

Overall Dimension: 25 13/16" x 1 9/16" (65.5 x 4 cm)

Rim Diameter: 22 7/16" (57 cm)

Axle Length: 6 5/16" (16 cm)

Front Dropout Spacing: 3 15/16" (10 cm)

Spokes Length: 6 5/16" (16 cm)

The Number of Spokes: 36

Controller Power: 1000W

Motor Power: 1000W

Motor Voltage: 48V

Motor Rotating Speed: 470 RPM

Motor Torque: 40 to 45 N.m

High Motor Efficiency: more than 85%

Net weight: 23.5 Lbs (10.66 kg)

Package Content:

1x 26" Front Wheel with Brushless Hub Motor

1x Battery Connection Cable

1x Electric Controller

2x Hand Brakes

2x Handle Grips

1x Thumb Throttle

1x Controller Bag

1x Set of Winding Pipe and Cable Tie

2x Terminal Boxes

1x Manual

• 1000W 48V 26" Electric Bicycle Front Hub Conversion Kit, fit for 3 15/16" front dropout spacing, with a speed of 31 mile/h (50 km/h), make your bicycle an electric power moped, brushless hub motor for noiseless running, to fully enjoy the pleasure of riding.
• Dual Mode Controller - Motor works under Hall effect and non-Hall effect, extend life for electric bicycle (If the components break down, controller will switch into non-hall effect mode, the motor will still be working).
• Durable Frame - Aluminum alloy frame for durability and stability.
• Convenient to Use - Thumb throttle with battery monitor makes speed control as a breeze.
• Hand brakes shut off the motor automatically to save energy and improve safety. Environmental Protection - Powered by battery, without carbon dioxide emissions.

User questions & answers

Question:	what kind of battery is correct for this item
Answer:	Electrokinetic cell battery ( Li, lead-acid, NiMH battery etc.) featured in nominal voltage 48v, nominal capacity not less than 17Ah is compatible with the 48V motor. We sell battery for this bike kit, you may search for ASIN#B00XP53DH4 to get more information.
Question:	What is the rated Amps of the controller
Answer:	21 Amps.
Question:	What is the load capacity on this tire
Answer:	i am over 300 and it move me around very fast dose that help you any
Question:	Am I correct in thinking this kit does not have peddle assist
Answer:	Yes, the peddle assist is not included. Thank you!

Product description

Notice:

Battery, Tire and Charger are Not Included.

Battery Recommendation: Electro kinetic cell battery featured in nominal voltage 48v, nominal capacity 17-20Ah is compatible with the motor.

Must to wear a helmet before riding this electric bicycle for protection.

Please go to those automobile repair shop with standard business license for modification.

If you have any question about the compatible Model, please contact our Customer Service before purchasing.

Specification:

Overall Dimension: 16 9/16" x 3 1/4" (42 x 8.3 cm)

Axle Length: 7 13/16" (19.8 cm)

Front Dropout Spacing: 5 5/16" (13.5 cm)

Controller Power: 1000W 26A

Motor Power: 1000W

Motor Voltage: 48V

Motor Rotating Speed: 480 RPM

High Motor Efficiency: 80%

Net weight: 20.9 Lbs (9.5 kg)

Package Content:

1x 20" Front Wheel with Brushless Hub Motor (Tire Not included)

1x Electric Controller

2x Hand Brakes

2x Handle Grips

1x Twist Throttle

1x Pedal Assist Sensor

1x Rope

1x Set of Widing Pipe and Cable Tie

1x Manual

• 1000W 48V 20" Electric Bicycle Front Hub Conversion Kit, fit for 5 5/16" front dropout spacing and 20"x4" tire, with a speed of 28 mile/h (45 km/h), make your bicycle an electric power moped, brushless hub motor for noiseless running, to fully enjoy the pleasure of riding.
• Dual Mode Controller - Motor works under Hall effect and non-Hall effect, extend life for electric bicycle (If the components break down, controller will switch into non-hall effect mode, the motor will still be working ).
• Pedal Assist Sensor - To sense your pedal cadence and accordingly adjust motor turning rate, get power assistant without using throttle, great for a long-distance journey, avoid wrist pain from keep pressing.
• Durable Frame - Aluminum alloy frame for durability and stability. Convenient to Use - Twist Throttle makes speed control as a breeze.
• Hand brakes shut off the motor automatically to save energy and improve safety. CE certificated for safety assurance. Environmental Protection - Powered by battery, without carbon dioxide emissions.

User questions & answers

Question:	can this be added to rear wheel hub system to work in tandom
Answer:	As long as they are on different frequencies... If Kid Galaxy only offers this toy with 1 frequency, there will be no way to prevent interference. From what I read on the box, this exact model is only sold as 49mhz, therefore you would only be able to run 1 of these at a time. They do offer 2 other styles that are on 27mhz and one of those can be run at the same time as this one on 49mhz. If the numbers are the same, you will have problems.
Question:	What does the battery hook up look like? Is it just a black and red wire
Answer:	Yes the remote is very easy to use
Question:	Is the motor capable of regenerative breaking if we have a controller that is a regenerative breaking controller
Answer:	Not fit. This case is only suitable for Samsung Galaxy Tab A 8.4 inches (2020), SM-T307 / T307U. If you need Samsung galaxy tab 8 SM-290 tablet case, you can click the link below to see if you like it. https://www.amazon.com/FIREVASE-Protective-Absorption-Convertible-Lightweight/dp/B08C5CBCH8/ref=sr_1_52?crid=9Y3U933BSDH1&dchild=1&keywords=samsung%2Bt290%2Bcase&qid=1609302291&sprefix=SAMSUNG%2BT290%2B%2Caps%2C381&sr=8-52&th=1
Question:	Can I install this kit to a mechanical tricycle
Answer:	Hello, the verizo model number qmv7b tablet you mentioned does not match our product. This case is not suitable. Thank you for your attention to our products!

Product description

The Electric Bicycle Kit Key feature:

* CE, EN15194 approved

* Restricted to 750W and 38km/h by default as a road-legal kit

* Nylon tire & alloy rim & stainless steel spoke

* Rare-earth metal magnet are used in the motor to efficiently produce large power

* Aluminum alloy powerful controller guarantee big current supply

* Twist throttle has battery level display and power-cut off button

* Brake Levers cut off the power supply to the motor safely

* Crank speed sensor for pedal assist



Upgraded Intelligent Motor Controller:

* Allow you to swap two power modes between the full 1000W power or 750W power by a single blue switch wire is embedded in controller. (Only for Twist Throttle)* Still remain the full 1000W power with no speed control.(Only for Pedal Assist System,"PAS")



Notes:

1. Battery and charger are not included in package.

2. The system requires a 48 Volt electrokinetic cell battery with a nominal capacity not less than 11.6Ah.

3. The US regulations dictate that a kit must not exceed the rated power of 750W to be road-legal.



Caution: For your Safety, Please turn off the battery before connecting the Controller！



Specification:

Wheel type: Front

Motor: Brushless gearless

Tire: Nylon

Rim: Alloy double wall

Torque: 45 N.M

Spokes: Steel, 12G x 2.6mm

Wheel Size: 26 inch

Wheel Axle: Length 175mm x Dia 10mm

Max load capacity: 330-440lb / 150-200kg

Net weight: 22lb / 10kg

Power Cord Length: 95cm

Mode 1 Power: 750W / 48V; Max speed: 24mph / 38 km/h

Mode 2 Power: 1000W / 48V; Max speed: 28mph / 45 km/h



Package Includes:

1x Brushless Gearless Motor Front Wheel

1x Intelligent Motor Controller

1x Pedal Assist Crank Sensor

1x Cable Ties & Plastic Coil

1x Pair of Handle Bars (included Twist Throttle)

1x Controller Bag

1x Pair of Brake Handles

1x Manual

• 48V 1000W Powerful brushless gearless motor with 28mph (45km/h) speed; Restricted to 750W and 24mph (38km/h) speed by default as a road-legal pedal bike conversion kit.
• Pedal Assistance System (PAS): enjoy cycling while driving electric bike with 330-440LB / 150-200KG Max Load Capacity.
• Brake Levers cut off the power supply to the motor safely; Twist throttle has battery level display
• Comes with all the components you need to a full conversion, including Front Wheel, Motor Controller, Controller Bag, Pedal Assist Crank Sensor, Cable Ties & Plastic Coil, Twist Throttle, One Pair of Brake Handles, Manual. (Note: Battery not included)
• CE, EN15194 approved; 48 Volt electrokinetic cell battery with a nominal capacity not less than 11.6Ah is required.

User questions & answers

Question:	How wide is the tire
Answer:	This kit comes with a 2.0 tire pre-mounted and inflated by half.
Question:	Can I use lead acid batteries in this setup? Thanks
Answer:	I don’t see why not, as long as it meets your motors needs.
Question:	Can I install this in the rear instead of the front
Answer:	NO, you cannot. This is because you can not attach a sprocket/gears with which to hook up the chain to the pedal. That said, however, you "could" get away with doing so as long as you build your bike as a "scooter" - i.e., no pedals, no cycling. :) This means that you'll have to run it off the throttle ALL the time, thus requiring a battery with higher Amps *capacity" if you want to go farther/longer than. One other issue you will also need to double-check is the width of the hub to make sure it will span the wider rear drop-down gap. I bought this to build a bike for my sister's 6'3" boyfriend so I don't have it here to check for you. He was AMAZED by how powerful it is. I designed it with a 48V, 13.5Amp battery.
Question:	How many amps is the controller rated for
Answer:	Most controller units are rated at 20 amps. There are after market units that can be higher after fudging them but, why would you want to? 20 amps is the standard and higher amps brings you into the fire hazard zone...just be sure to put an in-line 20 amp fuse between the controller and your battery and you avoid burning stuff up. Available at NAPA.

• 【High-Performance】 48V 1000W Powerful brushless gearless motor with 28mph (45km/h) speed;maximum current 36A, low voltage protection is DC42±0.5V.
• 【High-quality Durable Material】 Nylon tires + stainless steel alloy spokes + stainless steel alloy wheels + rare earth metal magnet motors greatly improve product quality and driving efficiency, so as to provide you with a better experience.
• 【Humanized Design】 The throttle has battery power display and power off function, and the auxiliary pedal function can carry 150-200KG weight. Such an intimate design is convenient for your use.
• 【Package Includes】Kits include all necessary components for installation; Motor/Wheel*1, controller*1, torque arm*1, brake levers*1, backpack*1, manual*1, yellow junction box*2, spring wire*1, connecting wire* 2 (black*1; red*1), pedal assist sensor*1, and cable ties*6. Battery and tire is not included.
• 【Quality Assurance】 Refit your bicycle, let you enjoy the fun of riding, complete accessories, safe and reliable quality. If you encounter any problems during the use of the product, please feel free to contact us, we will serve you 24 hours a day.

Product features

Package Including

1x Brushless Gearless Motor Front Wheel

1x Intelligent Motor Controller

1x Pair of Handle Bars (included Twist Throttle) 1x Pair of Brake Handles 1x Backpack

1x Manual 2x yellow junction box

1x Spring Wire

1x Black Wire

1x Red Wire

1x Assistant Sensor

6x Cable Tie

Wheel Motor Wire Connections

This figure is an introduction to these lines. It seems complicated but simple and easy to operate.

When installing, you can refer to this picture: blue to blue, green to green, yellow to yellow.

For specific installation steps, you can also refer to the video on the product page.

Installation of the Brake Handle

1:1 Pedal Assistance System

Quality Materials

Tire: Nylon

Wheel friction: alloy double wall

Cracking bar: steel

This makes the product more durable.

Motor Controller

Size：7.08*3.54*1.77 inch

Controller Parameters: DC48V, 1000W

Please check carefully before buying.

Handle Bars

Accelerating handle with a battery display will remind you of when to recharge.

You can freely adjust the power by turning the handle, and the corresponding indicator will light up.

• 🚴‍♀️36V 500W super power brushless gearless hub motor, Restricted to 750W and 19.88mile/h by default as a road-legal kit
• 🚴‍♀️Crank speed sensor for pedal assist, Brake Levers cut off the power supply to the motor safely
• 🚴‍♀️Nylon tire& alloy rim& stainless steel spoke, Rare-earth metal magnates are used in the motor to efficiently produce large power
• 🚴‍♀️Aluminum alloy powerful controller guarantee big current supply
• 🚴‍♀️Twist throttle has battery level display and power-cut off button

User questions & answers

Question:	So if this hub has magnets, can it generate electricity from coasting / manual pedaling
Answer:	I think this depends on the controller, and the one that comes with this kit doesn't support that.
Question:	what type of connectors are on the battery control wires
Answer:	they were something cheap I Soldered nicer ones on.And if you don’t put the controller close to your battery you will have to make an extension wire.
Question:	I only do 12 mph on the average enjoying the view so I only need coaster brakes. So can this work without the brake levers
Answer:	I switched mine out for the ones that came with the kit because they also work as a kill switch as they are connected to the controller.
Question:	Why do you say it is limited to 19.88 mph yet in another place you say you get 23 mph? how do i by pass that so i can go even faster
Answer:	there is a limiter wire, the two single wires connect together to limit power to 20 mph for local laws. But it's also a factor of your battery power. 36v/10ah (360 watts) will max out at 20 (under 15 with the limiter connected). A higher amp hour battery will have more wattage available for the motor. disconnecting the wires will allow you unlimited power until you fry the motor from an oversized battery exceeding the input design limits. The power wires are not heavy gauge so they will only handle so much current before melting. A 36v/14ah battery will peak at 504 watts...that's probably how the other guy was hitting 30-36 mph.

Product features

JAXPETY 36V 500W E-Bike Front Wheel

This Electric Bicycle kit includes everything needed(except battery) to convert your standard bike into a top-of-the-line performance electric bike,which delivers unequaled performance and reliability.You will be out cruising along at 23.6mile/h without a sweat!

Provides you with a whole wheel with tire, not just the tire frame. Dual model controller guarantees you can ride your motorized bike even when the signal source is disabled.

Ungraded Intelligent Motor Controller:

For motor or controller issues your electric bicycle can fail to work properly. This single white switch wire will help you to determine the cause.

Sharing From Our Precious Customers

• 🚴Rear wheel: 48V 1000W and 750W super power brushless gearless hub motor. It is the rear wheel, couldn't be used on the front.
• 🚴Restricted to 750W and 19.88mile/h by default as a road-legal kit.
• 🚴Nylon tire& alloy rim& stainless steel spoke, Rare-earth metal magnates are used in the motor to efficiently produce large power.
• 🚴Aluminum alloy powerful controller guarantee big current supply.
• 🚴Twist throttle has battery level display and power-cut off button.

User questions & answers

Question:	Will this battery work ebike li-ion battery 48v20ah 1000w scooter electric bicycle motor bms charger us
Answer:	If it's a 48v battery, then yes.
Question:	What kind of Battery do you need for this
Answer:	Ideally 48-52v 20ah thats 30mph for 20miles no peddle and alil juice left over
Question:	my front wheel is 28 x 1.75 will this work
Answer:	No you have a 28” rim and this is a 26” rim.
Question:	What’s the top speed at 1000w setup? Looking at a 48v 20ah battery so I’m lookinh for top speed with a 25+ mile range
Answer:	I have that setup 48V 20AH and my top speed is 30 mph. I have not done a range test, but will try to update later with range info too.

Product features

JAXPETY48V 1000W E-Bike Rear Wheel

This Electric Bicycle kit includes everything needed(except battery) to convert your standard bike into a top-of-the-line performance electric bike, which delivers unequaled performance and reliability. You will be out cruising along at 28mile/h without a sweat!

Note: 1.Our product is compatible with many kinds of battery. The system requires a 48 Volt electrokinetic cell battery (Li, lead-acid, NiMH battery etc.) with a nominal capacity not less than 12Ah. 2.Battery and charger are not included in package. 3.The US regulations dictate that a kit must not exceed the rated power of 750W to be road-legal.

• Package Includes:
• 1x 48V 1000W Motor
• 1x 26" Front Wheel / Rear Wheel
• 1x 48V Controller
• 2x Hand Brakes
• 1x Twist Throttle
• 1x Battery Power Indicator
• 2x Handle Grips
• 1x Harness
• 1x Battery Carrying Bag
• 1x User Manual

Sharing From Our Precious Customers

• 500W POWERFUL MOTOR: Mounted to the rear wheel, a powerful 500 watt motor kicks in and pedaling becomes easy. The motor is perfect for making light work of steep hills and long journeys allowing you to relax and enjoy the view.
• ERGONOMICALLY DESIGNED: The 27.5 inch wheels and 16 inch large frame are in line with the current style of European and American body design, spacious and comfortable, your legs won't get tired anywhere near as fast compared to a regular bike. This allows you to ride longer than ever before covering much greater distances.
• 48V/10Ah BATTERY: Equipped with removable lithium battery provide a range of 50~62 miles in pedal assist mode and 25~31 miles in electric mode. Lithium technology boasts both lighter weights and extended durability taking you further, for longer!
• STYLISH DESIGN: The removable technology is super user friendly, it fully hides the battery in the frame and makes it easy to remove the battery with keys. With it’s striking design, the MACWHEEL is one of the best looking e-bikes on the market. Unlike some other electric bikes, the electronic cables are cleverly concealed within the frame which maintains a clean and crisp overall appearance.
• SMART LCD DISPLAY: Our LCD display provides the rider with essential information such as remaining battery life, total distance travelled, current speed, level of assistance selected and more. The smart controller manages the power output and helps to deliver a smooth and natural riding experience.
• Please buy 100% confidence with Macwheel. We pride ourselves on customer service and urge you to reach out to us directly if you have any questions at any point. Our outstanding customer support will do the best to make things right for you.

User questions & answers

Question:	dose this bike come with a instruction manual? or on line instruction only
Answer:	a little instruction manual but I downloaded a detaiedl one. just google the control panel and print it out. very thourough. also youtube
Question:	What's the distance on the 1-5 speeds and how do I ramp assist mode to go 25mph also how do I change it to mph instead of km
Answer:	Top speed is 17-18 mph I am getting about 30-40 miles - varies by slope and PA mode
Question:	Can i attach a rear rack on the wrangler 600 bike? has anyone added a rear rack to their bike, if so please let me know where i can find one
Answer:	There was no rack on my wrangler 600!
Question:	is the lcd display unit removable
Answer:	No, it was on the bike pre assembly

Product features

Cycle With Ease

Cycling is easy with an Macwheel Wrangler 600 Electric Mountain Bike. Our smart pedal assistance system makes light work of long journeys and steep hills. Picture yourself finishing a 31 mile ride and not needing a shower! Commuters and weekend riders enjoy the benefits of cycling without the fear of exhaustion or tiredness.

500watt Hub Motor

Mounted to the rear wheel, a 500watt brushless motor provides phenomenal levels of power to the rider. Max speed up to 15.5 mph. The motor is perfect for making light work of steep hills and long journeys allowing you to relax and enjoy the view.

48V 10Ah Removable Battery

The integrated in-tube design offers a sleek and modern look.

2 charging types - usually charge the battery on the bike, or unlock from the bike and charge whilst you work.

27.5" Tyres and 16" Aluminum Frame

A larger tyre size means for better handling and stability. The frame size of cruiser 550 is 18 inch. Our recommended height is 5'4''--6'3''. Please read the specification carefully before buying.

Intelligent LCD Display

Our LCD display provides the rider with essential information such as remaining battery life, total distance travelled, current speed, level of assistance selected and more.

Neat Hidden Cables

Our bikes electronic circuitry is concealed neatly within the bikes lightweight frame. This helps to reduce the chances of electronic cables getting caught, snagged or damaged whilst on the move.

Brake & Suspension System

Featuring both pre-load and lock out adjustment, the front fork suspension on this bike helps to provide a smoother and more comfortable riding experience. The perfect Tektro dual disc brakes fully protect your safety.

Transmission System

Featuring quality Shimano shift levers and Shimano Tourney gears, no compromise is made on quality. Ergonomically designed Shimano shift levers and gear levers fit comfortably in the hand.

Bike Size

A: 71.3 inch B: 27.9 inch

C: 13.8 inch D: 44.1 inch

E: 30.7-37 inch

Product description

QS 5000W V3 Motor have 5T high torque and 3.5T high speed, if you need to choose ,you can contact me by Email([email protected] ),my cell/WhatsAPP account is +86 13401536906;China

Details for 5kw electric bike hub motor QS V3 5000w motor 10kw peak power.

Rated Power: 5000W

Voltage : 48V-120V

KV : 9KV

Max torque : > 250N.M

Efficiency : > 90%

Hall sensor : yes, have two sets, one is for spare

Temperature : Yes

Drop out : 150mm

Axle size : 10mm x 16mm

Brake : disc brake PCD6*44mm

Freewheel : single freewheel

Net weight : 12.8kgs

Package content for 5000w electric bike hub motor

1x 5 kw motor (48v, 60v, 72v, 84v, 96v)

1x screws

1x good package.

• QS V3 5000w electric bike hub motor
• Drop out : 150-155mm
• Voltage : 48V-120V
• Net weight : 12.8kgs

User questions & answers

Question:	Can this be laced into a 20x4.5 front rim
Answer:	I don’t know which key starting
Question:	Is this product waterproof
Answer:	No there is not. It has start and stop button. It also has a forward and backwards. If you want to stop the child just pull foot off of it and then put back on to continue to go.
Question:	Can this be laced to a 700 cc or 29" wheel
Answer:	hi, yes. yes
Question:	What kv is the 3t winding? Also how much torque does the 3t and 5t motors have
Answer:	I send the bike I will return my money back

Product description

The Electric Bicycle Kit includes everything needed (except battery)

You'll be out cruising along at 34mph / 55km/h without a sweat!



Key feature:

* CE, EN15194 approved

* 48V 1500W and 750W super power brushless gearless hub motor

* Restricted to 750W and 38km/h by default as a road-legal kit

* Nylon tire & alloy rim & stainless steel spoke

* Rare-earth metal magnet are used in the motor to efficiently produce large power

* Aluminum alloy powerful controller guarantee big current supply

* Twist throttle has battery level display and power-cut off button

* Brake Levers cut off the power supply to the motor safely

* Crank speed sensor for pedal assist



Upgraded Intelligent Motor Controller:

* Allow you to swap two power modes between the full 1500W power or 750W power by a single blue switch wire is embedded in controller.



Notes:

1. Battery and charger are not included in package.

2. The system requires a 48 Volt electrokinetic cell battery with a nominal capacity not less than 14.5Ah.

3. The US regulations dictate that a kit must not exceed the rated power of 750W to be road-legal.



Specification:

Wheel type: Rear

Motor: Brushless gearless

Tire: Nylon

Rim: Alloy double wall

Spokes: Steel, 12G x 2.6mm

Wheel Size: 26 inch

Wheel Axle: Length 210mm x Dia 10mm

Max load capacity: 551 lb / 250kg

Net weight: 22lb / 10kg



Power Cord Length: 138cm

Mode 1 Power: 750W / 48V; Torque: 45 N.M; Max speed: 24mph / 38 km/h

Mode 2 Power: 1500W / 48V; Torque: 48 N.M; Max speed: 34mph / 55 km/h



Package Includes:

1x Brushless Gearless Motor Rear Wheel

1x Intelligent Motor Controller

1x Cable Ties & Plastic Coil

1x Wire Hub

1x Pair of Handle Bars (included Twist Throttle)

1x Pair of Brake Handles

1x yellow junction box

1x Manual

• 48V 1500W Powerful brushless gearless motor with 34mph (55km/h) speed; Restricted to 750W and 24mph (38km/h) speed by default as a road-legal pedal bike conversion kit.
• Pedal Assistance System (PAS): enjoy cycling while driving electric bike with 551LB / 250KG Max Load Capacity.
• Brake Levers cut off the power supply to the motor safely; Twist throttle has battery level display
• Comes with all the components you need to a full conversion, including Rear Wheel(of 7 speed sprocket), Motor Controller, Cable Ties & Plastic Coil, Wire Hub, Twist Throttle, One Pair of Brake Handles, Manual. (Note: Battery not included)
• CE, EN15194 approved; 48 Volt electrokinetic cell battery with a nominal capacity not less than 14.5Ah is required.

User questions & answers

Question:	Will this work on a tandem bike
Answer:	I don't see why not. As long as the wheel is 26" and the chain sprocket is on the back tire.
Question:	so only connect one blue wire for the
Answer:	I never connect the two blue wires if you do it will only go I believe at most 20 mph and is then 750 watt . if you want more speed leave them disconnected and get a 52 to 60 volt battery if you do I suggest a DC circuit breaker and if you increase voltage you must decrease amps if not you will greatly reduce the lifespan of your motor and or controller good luck have fun and do some research. I destroyed my first ebike bike by using lead acid batteries 4x12 without a fuse/circuit breaker
Question:	Using only the throttle and not the pas system, does the wheel move without the 7 speed sproket moving
Answer:	I have the 26" Voilamart kit but I'm a little confused about your question. The 7 speed sprocket moves with the wheel but I can pedal backwards while the throttle is on.
Question:	Is it 1500w out of the box? If not, how do you set it to 1500, and 34? i heard you need to use a wire
Answer:	It is 1500watts right out of the box. There are 2 blue wires, they only connect to each other, and if you connect them, it reduces the power to 750w, I think I previously said 250w, but that was a mistake, it's 750. I'm not sure what you mean by 34.

• ☑26inch 36V 350W Brushless gear hub front motor wheel with 17-22mph (28-35km/h) speed,enjoy cycling while driving electric bike with 220-330LB/ 100-150KG Max Load Capacity.（NOTE: Battery not included.）
• ☑Multi-function controller, used with headlights and button switches. The headlights have horns and lighting functions, making it easier for you to ride in the night. the controller box is waterproof design.
• ☑Pedal Assistance System (PAS):8 PAS is more sensitive， allowing you to ride without throttle response. Energy conservation and environmental protection,electric bike save energy and reduce carbon dioxide emissions while consuming less electricity.let you enjoy cycling while driving .
• ☑Upgrade to LCD Display. It offers battery percentage, speed, total and single trip distance function etc. With the use of thumb throttle accelerator, don't need replace your grip. Power Cut-off Brake Handle,as long as the controller detects the brake signal, the power supply will be disconnected immediately.
• ☑Easy to Assemble & Cost-effective: The electric bike conversion kit include motor wheel,controller,controller box,8PAS,LCD display,e-brake,hieadlights and switches.Apply to MTB Mountain Electric Bicycle front Wheel with 100mm dropout .

User questions & answers

Question:	Does the motor have regenerative braking to recharge the battery and will it fit a 9 or 10 speed cassette
Answer:	Box says 130 lbs max
Question:	Will the throttle on the handle interfere with gears of the bike, that are also on the handle
Answer:	I don't think anything is different.
Question:	Can these kits be adapted to besv js1 ebikes, whichh do not work
Answer:	The extreme has an undercarriage cover which protects the Axel's, as well as the electrical wires, the tires are also wider. We love the extreme one- we have woods and stumps and rocks - my kids have no issues with going over them. Recently bought the pink dune racer (not extreme) and returned it before even using- the shifter seemed more loose than the extreme, the wires are all exposed underneath, the tread on the tires is deep- our neighbors have same one and they wore the tread down and created a big hole in the tire from Black top. I would recommend extreme over the others!
Question:	battery questions
Answer:	It turns on as he drives

Product features

36V 48V 350W Motor Wheel Kit

If you like to ride in the early morning and dusk, to enjoy the beauty of nature and exercise, then you can choose this kit, which has headlight and horn to illuminate you ridding road before sunrise and after sunset .

36V 350W

Notes: 1. Battery and charger are not included in package. 2. The system requires a 48 Volt battery .

How to setup the Display

First connect the three phase wires (yellow, blue and green) of the motor and the controller, and then connect the Hall wire.

Then connect the controller and the display wire.

Press and hold the M key to boot

Press "+" and "-" at the same time to enter the setting mode.

P01, P02 do not need to be set

How to setup the Display

P03 sets the motor voltage

P04, P05 do not need to be set

P06 sets the motor size, such as 26inch

P07 sets the motor magnet number: 90

P08--P12 do not need to be set /// P13 is to set PAS, generally 8 //// P14--P17 do not need to set

How to setup the Display

After setting, press "+" and "-" at the same time to return, turn off the meter before turning it on

Then connect the self-learning line. If the wheels are reversed, disconnect the self-learning line and reconnect. The motor will rotate correctly. If "Error 07" appears, press "+" to adjust the auxiliary gear. Then Error 07 will disappear and rotate 10 After seconds, disconnect the self-learning line, and then connect the thumb throttle.

Press "-" for 3 seconds to enter the cruise mode, and press "-" for 3 seconds to exit the cruise mode

After connecting the headlight and headlight switch wires, press and hold "+" for 3 seconds to turn on the headlight switch function

How to setup the Display

If after adjusting the auxiliary gear, error 07 still exists, reconnect all wires.

36V 350W BLDC Controller

Multifunction controller, with headlight horn throttle and display function etc.,this kit contains lights and switches, can be used to install.

LCD Display

LCD display is easy to operate with 5 gears speeds for you to choose, Speed, driving distance, battery level, cruise mode, etc., it can provide

Pedal Assistance System

8PAS(Pedal Assistance System ) let you pedal bike easier, save your breath.

Light and Switch

The headlights have the functions of lighting and horns, which are used in conjunction with switches to improve your riding safety at night.

Cut-off Brake

Power cut-off brake handles ensure personal safety while protecting the motor.

Controller Box

Waterproof controller box that can be mounted on a bicycle stand,