11 best electric bike conversion kits

• 🚴‍♀️36V 500W super power brushless gearless hub motor, Restricted to 750W and 19.88mile/h by default as a road-legal kit
• 🚴‍♀️Crank speed sensor for pedal assist, Brake Levers cut off the power supply to the motor safely
• 🚴‍♀️Nylon tire& alloy rim& stainless steel spoke, Rare-earth metal magnates are used in the motor to efficiently produce large power
• 🚴‍♀️Aluminum alloy powerful controller guarantee big current supply
• 🚴‍♀️Twist throttle has battery level display and power-cut off button

User questions & answers

Question:	So if this hub has magnets, can it generate electricity from coasting / manual pedaling
Answer:	I think this depends on the controller, and the one that comes with this kit doesn't support that.
Question:	what type of connectors are on the battery control wires
Answer:	they were something cheap I Soldered nicer ones on.And if you don’t put the controller close to your battery you will have to make an extension wire.
Question:	I only do 12 mph on the average enjoying the view so I only need coaster brakes. So can this work without the brake levers
Answer:	I switched mine out for the ones that came with the kit because they also work as a kill switch as they are connected to the controller.
Question:	Why do you say it is limited to 19.88 mph yet in another place you say you get 23 mph? how do i by pass that so i can go even faster
Answer:	there is a limiter wire, the two single wires connect together to limit power to 20 mph for local laws. But it's also a factor of your battery power. 36v/10ah (360 watts) will max out at 20 (under 15 with the limiter connected). A higher amp hour battery will have more wattage available for the motor. disconnecting the wires will allow you unlimited power until you fry the motor from an oversized battery exceeding the input design limits. The power wires are not heavy gauge so they will only handle so much current before melting. A 36v/14ah battery will peak at 504 watts...that's probably how the other guy was hitting 30-36 mph.

Product features

JAXPETY 36V 500W E-Bike Front Wheel

This Electric Bicycle kit includes everything needed(except battery) to convert your standard bike into a top-of-the-line performance electric bike,which delivers unequaled performance and reliability.You will be out cruising along at 23.6mile/h without a sweat!

Provides you with a whole wheel with tire, not just the tire frame. Dual model controller guarantees you can ride your motorized bike even when the signal source is disabled.

Ungraded Intelligent Motor Controller:

For motor or controller issues your electric bicycle can fail to work properly. This single white switch wire will help you to determine the cause.

Sharing From Our Precious Customers

Product description

The Electric Bicycle Kit Key feature:

* CE, EN15194 approved

* Restricted to 750W and 38km/h by default as a road-legal kit

* Nylon tire & alloy rim & stainless steel spoke

* Rare-earth metal magnet are used in the motor to efficiently produce large power

* Aluminum alloy powerful controller guarantee big current supply

* Twist throttle has battery level display and power-cut off button

* Brake Levers cut off the power supply to the motor safely

* Crank speed sensor for pedal assist



Upgraded Intelligent Motor Controller:

* Allow you to swap two power modes between the full 1000W power or 750W power by a single blue switch wire is embedded in controller. (Only for Twist Throttle)* Still remain the full 1000W power with no speed control.(Only for Pedal Assist System,"PAS")



Notes:

1. Battery and charger are not included in package.

2. The system requires a 48 Volt electrokinetic cell battery with a nominal capacity not less than 11.6Ah.

3. The US regulations dictate that a kit must not exceed the rated power of 750W to be road-legal.



Caution: For your Safety, Please turn off the battery before connecting the Controller！



Specification:

Wheel type: Front

Motor: Brushless gearless

Tire: Nylon

Rim: Alloy double wall

Torque: 45 N.M

Spokes: Steel, 12G x 2.6mm

Wheel Size: 26 inch

Wheel Axle: Length 175mm x Dia 10mm

Max load capacity: 330-440lb / 150-200kg

Net weight: 22lb / 10kg

Power Cord Length: 95cm

Mode 1 Power: 750W / 48V; Max speed: 24mph / 38 km/h

Mode 2 Power: 1000W / 48V; Max speed: 28mph / 45 km/h



Package Includes:

1x Brushless Gearless Motor Front Wheel

1x Intelligent Motor Controller

1x Pedal Assist Crank Sensor

1x Cable Ties & Plastic Coil

1x Pair of Handle Bars (included Twist Throttle)

1x Controller Bag

1x Pair of Brake Handles

1x Manual

• 48V 1000W Powerful brushless gearless motor with 28mph (45km/h) speed; Restricted to 750W and 24mph (38km/h) speed by default as a road-legal pedal bike conversion kit.
• Pedal Assistance System (PAS): enjoy cycling while driving electric bike with 330-440LB / 150-200KG Max Load Capacity.
• Brake Levers cut off the power supply to the motor safely; Twist throttle has battery level display
• Comes with all the components you need to a full conversion, including Front Wheel, Motor Controller, Controller Bag, Pedal Assist Crank Sensor, Cable Ties & Plastic Coil, Twist Throttle, One Pair of Brake Handles, Manual. (Note: Battery not included)
• CE, EN15194 approved; 48 Volt electrokinetic cell battery with a nominal capacity not less than 11.6Ah is required.

User questions & answers

Question:	How wide is the tire
Answer:	This kit comes with a 2.0 tire pre-mounted and inflated by half.
Question:	Can I use lead acid batteries in this setup? Thanks
Answer:	I don’t see why not, as long as it meets your motors needs.
Question:	Can I install this in the rear instead of the front
Answer:	NO, you cannot. This is because you can not attach a sprocket/gears with which to hook up the chain to the pedal. That said, however, you "could" get away with doing so as long as you build your bike as a "scooter" - i.e., no pedals, no cycling. :) This means that you'll have to run it off the throttle ALL the time, thus requiring a battery with higher Amps *capacity" if you want to go farther/longer than. One other issue you will also need to double-check is the width of the hub to make sure it will span the wider rear drop-down gap. I bought this to build a bike for my sister's 6'3" boyfriend so I don't have it here to check for you. He was AMAZED by how powerful it is. I designed it with a 48V, 13.5Amp battery.
Question:	How many amps is the controller rated for
Answer:	Most controller units are rated at 20 amps. There are after market units that can be higher after fudging them but, why would you want to? 20 amps is the standard and higher amps brings you into the fire hazard zone...just be sure to put an in-line 20 amp fuse between the controller and your battery and you avoid burning stuff up. Available at NAPA.

Product description

Notice:

Battery and Charger are Not Included.

Battery Recommendation: Electro kinetic cell battery featured in nominal voltage 48v, nominal capacity 17-20Ah is compatible with the motor.

Must to wear a helmet before riding this electric bicycle for protection.

Please go to those automobile repair shop with standard business license for modification.

If you have any question about the compatible Model, please contact our Customer Service before purchasing.

Specification:

Overall Dimension: 25 13/16" x 1 9/16" (65.5 x 4 cm)

Rim Diameter: 22 7/16" (57 cm)

Axle Length: 6 5/16" (16 cm)

Front Dropout Spacing: 3 15/16" (10 cm)

Spokes Length: 6 5/16" (16 cm)

The Number of Spokes: 36

Controller Power: 1000W

Motor Power: 1000W

Motor Voltage: 48V

Motor Rotating Speed: 470 RPM

Motor Torque: 40 to 45 N.m

High Motor Efficiency: more than 85%

Net weight: 23.5 Lbs (10.66 kg)

Package Content:

1x 26" Front Wheel with Brushless Hub Motor

1x Battery Connection Cable

1x Electric Controller

2x Hand Brakes

2x Handle Grips

1x Thumb Throttle

1x Controller Bag

1x Set of Winding Pipe and Cable Tie

2x Terminal Boxes

1x Manual

• 1000W 48V 26" Electric Bicycle Front Hub Conversion Kit, fit for 3 15/16" front dropout spacing, with a speed of 31 mile/h (50 km/h), make your bicycle an electric power moped, brushless hub motor for noiseless running, to fully enjoy the pleasure of riding.
• Dual Mode Controller - Motor works under Hall effect and non-Hall effect, extend life for electric bicycle (If the components break down, controller will switch into non-hall effect mode, the motor will still be working).
• Durable Frame - Aluminum alloy frame for durability and stability.
• Convenient to Use - Thumb throttle with battery monitor makes speed control as a breeze.
• Hand brakes shut off the motor automatically to save energy and improve safety. Environmental Protection - Powered by battery, without carbon dioxide emissions.

User questions & answers

Question:	what kind of battery is correct for this item
Answer:	Electrokinetic cell battery ( Li, lead-acid, NiMH battery etc.) featured in nominal voltage 48v, nominal capacity not less than 17Ah is compatible with the 48V motor. We sell battery for this bike kit, you may search for ASIN#B00XP53DH4 to get more information.
Question:	What is the rated Amps of the controller
Answer:	21 Amps.
Question:	What is the load capacity on this tire
Answer:	i am over 300 and it move me around very fast dose that help you any
Question:	Am I correct in thinking this kit does not have peddle assist
Answer:	Yes, the peddle assist is not included. Thank you!

• 【HIGH QUALITY MATERIAL】 - The electic bike use aluminum alloy frame, the front fork is made of high-strength carbon steel and packed with premium comfort shock absorption; The front and rear wheels are double layer aluminum alloy wheel.
• 【LARGE CAPACITY REMOVABLE LITHIUM BATTERY】 - 36V/8AH li battery supports 25km/15.5mile ( E-Bike Mode ) to 50km/31mile ( Assisted Mode ) ridding, equipped with smart lithium battery charger, fast charging only need 4-6 hours. Adapting to need of your long-distance riding.
• 【250W HIGH SPEED GEAR SHIFT SYSTEM】 - The E-bike wields front and rear disc brakes and 21-speed transmission system, you can adjust suitable speed to complete your journey and perfect brakes fully guarantee your safety.
• 【ERGONOMIC DETAILS DESIGN】 - Ergonomic handbar, adjustable seat and RST, anti-slip and wear resistant tire. The bright LED headlamp and horn are equipped for night riding. Meter has 3-speed smart button. We attention every detail of each component.
• 【3 Working Models】 - E-bike & Assisted bicycle & Normal bike. With the LED 3-speed smart meter button, you can choose the electric assist power according to your needs. You can add a burst of speed with the throttle, which is ideal for pulling away from traffic lights. Combining three modes would be a better choice.

User questions & answers

Question:	How does it do on hills
Answer:	If you're going to do a lot of Hills you probably want a 750 or 1000. My 250 does just fine as long as I use pedal assist going up moderate Hills.
Question:	Does the protection plan cover theft
Answer:	No
Question:	How loud is the bike in e mode
Answer:	Not really loud, but it does make a soft electric motor noise.
Question:	Can the battery be upgraded to a higher volt, such as 48v or a 52v battery capacity
Answer:	Sorry , no.

Product features

Specification:

• Frame Material: Aluminum Alloy/6061 aluminum alloy material
• Wheel Diameter: 26 inch
• Vehicle weight: About 23.6kg
• Battery weight: About 2.2kg
• Load capacity: 150kg
• Package Size:136 x 25 x 73cm
• Mileage: 25-50km/40KM ( Electric) - 55Kms (PAS)
• Maximum speed: 25km/h/30KM/H(Electric)

High bright LED headlamp

The bright LED headlamp and horn are equipped for night riding.

250W High Speed Brushless Gear Motors

Provide great power to the electric bike, allowing it to reach speeds of up to 15 MPH.

36V/8AH li battery

36V/8AH li battery supports 25km/15.5mile ( E-Bike Mode ) to 50km/31mile ( Assisted Mode ) ridding, fast charging only need 4-6 hours.

Disc Brake

Front and rear disc brakes provide security for your trip.

Meter Operation Instruction:

• 1. Press the M key for 2 seconds to turn on/off. The default value is level "low".
• 2. Press“+”button to increase pedal assist level from “low" to“mid" and “high". Level “High” is the maximum power of PAS, which will bring you faster speed while pedaling.
• 3. Press“-”button to decrease pedal assist level from “high" to"mid"and“low".
• 4. Press“-" button till all the three pedal assist level indicators are off to enter into pure electric mode: Just enjoy your ride by simply twisting the throttle.
• 5.Press the left key -, first row indicator all go out, then low power mode directly convert to pure electric mode.

• 🚴Rear wheel: 48V 1000W and 750W super power brushless gearless hub motor. It is the rear wheel, couldn't be used on the front.
• 🚴Restricted to 750W and 19.88mile/h by default as a road-legal kit.
• 🚴Nylon tire& alloy rim& stainless steel spoke, Rare-earth metal magnates are used in the motor to efficiently produce large power.
• 🚴Aluminum alloy powerful controller guarantee big current supply.
• 🚴Twist throttle has battery level display and power-cut off button.

User questions & answers

Question:	Will this battery work ebike li-ion battery 48v20ah 1000w scooter electric bicycle motor bms charger us
Answer:	If it's a 48v battery, then yes.
Question:	What kind of Battery do you need for this
Answer:	Ideally 48-52v 20ah thats 30mph for 20miles no peddle and alil juice left over
Question:	my front wheel is 28 x 1.75 will this work
Answer:	No you have a 28” rim and this is a 26” rim.
Question:	What’s the top speed at 1000w setup? Looking at a 48v 20ah battery so I’m lookinh for top speed with a 25+ mile range
Answer:	I have that setup 48V 20AH and my top speed is 30 mph. I have not done a range test, but will try to update later with range info too.

Product features

JAXPETY48V 1000W E-Bike Rear Wheel

This Electric Bicycle kit includes everything needed(except battery) to convert your standard bike into a top-of-the-line performance electric bike, which delivers unequaled performance and reliability. You will be out cruising along at 28mile/h without a sweat!

Note: 1.Our product is compatible with many kinds of battery. The system requires a 48 Volt electrokinetic cell battery (Li, lead-acid, NiMH battery etc.) with a nominal capacity not less than 12Ah. 2.Battery and charger are not included in package. 3.The US regulations dictate that a kit must not exceed the rated power of 750W to be road-legal.

• Package Includes:
• 1x 48V 1000W Motor
• 1x 26" Front Wheel / Rear Wheel
• 1x 48V Controller
• 2x Hand Brakes
• 1x Twist Throttle
• 1x Battery Power Indicator
• 2x Handle Grips
• 1x Harness
• 1x Battery Carrying Bag
• 1x User Manual

Sharing From Our Precious Customers

• Please ensure you select a specific variant from size and style. By default, the first variant of each option will be selected. Easily convert your bicycle to an ebike. Kits are ready to install with aluminum double-walled rim and hub motor already attached. All you need to do is to transfer the original tire.
• Kits include all necessary components for installation; Motor/Wheel, controller, LED display, throttle, brake levers, pedal assist system, torque arm, and cable ties. Battery and tire are not included.
• Upgrade to LCD Display. It offers battery percentage, speed, total and single trip distance, wattage, PAS levels, headlight switch, and potential error codes for easier troubleshooting.
• Continue to pedal: Pedal Assist Sensor (PAS) allows you to ride without throttle response. You may choose to operate your e-Bike either way. Going on a lengthy trip? Avoid uncomfortable wrist positions and simply pedal anytime, anywhere.
• We offer a 3 month warranty on all components included in the conversion kit. We provide technical support and hassle-free returns, full refund or replacements. We strive to ensure your satisfaction in our service and products.

User questions & answers

Question:	Can i use a 35ah battery with this? i see the controller is only 30a? or do i need to change controllers
Answer:	yes. voltage matters. i bought a 48 volt battery. amp hours (ah) is how long the battery lasts. more is better. though heavier.
Question:	Will this work for a schwinn adult trike with a rear basket
Answer:	i don,t think for the rear it should work for front wheel plus it will be lot easier to fix flat if you get a flat in the rear ok
Question:	Does the PAS sensor work when using front wheel drive
Answer:	yes
Question:	Is regenerative braking possible
Answer:	Not with this controller. The controller is what makes regen possible. You will not find regen on any of the cheap kits. On more exspensive kits with better controllers they offer regen. The motor as all direct drive hubs are capable of regen. But it is done with the controller.

Product features

YOU CAN CHANGE ALMOST ANY BIKE INTO AN ELECTRIC BIKE

Trying to figure out a new electric bike design setup that has enough power for your demands?

Ebikeling electric bike conversion kits are perfectly suited to your needs.

We provide a wide range of configurations offering freedom when building your setup.

Use almost any bicycle to start your setup today.

Switch your tire, make easy installments, and connect a few cables.

POWER YOUR BIKE

Choose your power supply

Customize the amount of power desired for your trips.

Get a higher top speed.

BUILD YOUR NEXT ADVENTURE!

Keep pedaling to maintain performance on long-distance rides thanks to Pedal Assistance System.

36V 500W 26" GEARED EBIKE CONVERSION KIT

EBIKELING Geared Brushless Electric Bicycle Conversion Kits come with a 500W hub motor and a 22 Amp controller.

Kits are ready to install with aluminum double walled rim and hub motor are already attached. All you need to do is to transfer original tire.

We have two throttle control options to choose from, twist or thumb. There are several other accessories included to complete this ebike kit such as pedal assist sensor, or a set of brake levers with safety cutoff switches.

36V 500W 700C GEARED EBIKE CONVERSION KIT

EBIKELING Geared Brushless Electric Bicycle Conversion Kits come with a 500W hub motor and a 22 Amp controller.

Kits are ready to install with aluminum double walled rim and hub motor are already attached. All you need to do is to transfer original tire.

We have two throttle control options to choose from, twist or thumb. There are several other accessories included to complete this ebike kit such as pedal assist sensor, or a set of brake levers with safety cutoff switches.

48V 1500W 26" DIRECT DRIVE REAR EBIKE CONVERSION KIT

EBIKELING Direct Drive Brushless Electric Bicycle Conversion Kits come with a 1500W hub motor and a 35 Amp controller.

Kits are ready to install with aluminum double walled rim and hub motor are already attached. All you need to do is to transfer original tire.

We have two throttle control options to choose from, twist or thumb. There are several other accessories included to complete this ebike kit such as pedal assist sensor, or a set of brake levers with safety cutoff switches.

48V 1200W 700C DIRECT DRIVE EBIKE CONVERSION KIT

EBIKELING Direct Drive Brushless Electric Bicycle Conversion Kits come with a 1200W hub motor and a 30 Amp controller.

Kits are ready to install with aluminum double walled rim and hub motor are already attached. All you need to do is to transfer original tire.

We have two throttle control options to choose from, twist or thumb. There are several other accessories included to complete this ebike kit such as pedal assist sensor, or a set of brake levers with safety cutoff switches.

Phone Holder Bag

Installed by three velcro fastening straps that provide a secure and reliable method to access apps without taking out your phone.

Saddle Bag

Durable, compact, and waterproof bag strapped under the seat to carry essential items at all times.

Mini Pump

Lightweight, portable, and super compact hand pump compatible with Schrader and Presta valves.

TFT 750C LCD Display

Bike computer mounted on the handlebar to monitor battery life, pedal-assist mode, mileage, and speedometer.

Extra Comfort

Thick high-density memory foam with dual anti-shock cushioning balls.

Durability

Premium artificial leather surface material ensures great abrasion-resistance.

Safety

Added eye-catching red warning strip for visibility riding at night or in rain.

Ventilation

Center cutout design offers anatomic relief by providing airflow and avoiding discomfort.

• 【High-Performance】 48V 1000W Powerful brushless gearless motor with 28mph (45km/h) speed;maximum current 36A, low voltage protection is DC42±0.5V.
• 【High-quality Durable Material】 Nylon tires + stainless steel alloy spokes + stainless steel alloy wheels + rare earth metal magnet motors greatly improve product quality and driving efficiency, so as to provide you with a better experience.
• 【Humanized Design】 The throttle has battery power display and power off function, and the auxiliary pedal function can carry 150-200KG weight. Such an intimate design is convenient for your use.
• 【Package Includes】Kits include all necessary components for installation; Motor/Wheel*1, controller*1, torque arm*1, brake levers*1, backpack*1, manual*1, yellow junction box*2, spring wire*1, connecting wire* 2 (black*1; red*1), pedal assist sensor*1, and cable ties*6. Battery and tire is not included.
• 【Quality Assurance】 Refit your bicycle, let you enjoy the fun of riding, complete accessories, safe and reliable quality. If you encounter any problems during the use of the product, please feel free to contact us, we will serve you 24 hours a day.

Product features

Package Including

1x Brushless Gearless Motor Front Wheel

1x Intelligent Motor Controller

1x Pair of Handle Bars (included Twist Throttle) 1x Pair of Brake Handles 1x Backpack

1x Manual 2x yellow junction box

1x Spring Wire

1x Black Wire

1x Red Wire

1x Assistant Sensor

6x Cable Tie

Wheel Motor Wire Connections

This figure is an introduction to these lines. It seems complicated but simple and easy to operate.

When installing, you can refer to this picture: blue to blue, green to green, yellow to yellow.

For specific installation steps, you can also refer to the video on the product page.

Installation of the Brake Handle

1:1 Pedal Assistance System

Quality Materials

Tire: Nylon

Wheel friction: alloy double wall

Cracking bar: steel

This makes the product more durable.

Motor Controller

Size：7.08*3.54*1.77 inch

Controller Parameters: DC48V, 1000W

Please check carefully before buying.

Handle Bars

Accelerating handle with a battery display will remind you of when to recharge.

You can freely adjust the power by turning the handle, and the corresponding indicator will light up.

Product description

We usually match 72V 20AH with 72V Charger for 72V 2000W Ebike kit ;

https://www.amazon.com/dp/B07RXCSZVV?ref=myi_title_dp

https://www.amazon.com/dp/B078XBCKBW?ref=myi_title_dp

We have thumb throttle ,half twist throttle and full twsit throttle ,if you have request ,when you order it ,please you tell me the throttle style that you need by by Email ([email protected]), My WhatsApp account is +86 13401536906; China

Product Description

Motor: 72v 2000w Electric bike rear hub motor wheel (180°C copper winding+ Best magnet )

Wheel: Sun ringle MTX33/39 Double-wall alloy rims spoke (2.6mm spokes spoked by park tool) Throttle: thumb or twist throttle

Brake :two alloy brake levers (for both side power off)

Controller:72V 45A controller

PAS: 1:1 PAS With 8 magnets

Display: Multifunction LCD display

Gear: 7 speed gears

72V SW900 Display for 2000w 72v Electric bike kit

1.Vehicle speed display function

2.Speed limit function

3. Battery capacity indicator function

4. 5-Levels assistant function

5. Time indicator function

6. Running range counter

About the after-sale service

1. Our goal is customer satisfaction!

2. After you received the goods, if you do not know how to use it, please feel freely to contact nnebikes, we will try our best to deal with all problems.

3. Our company provide 1 year free warranty. Within 1 year, if product parts have problem (like fuse, BMS, case, charger), we will provide new parts for free(You need to provide strong evidence that shows these parts have been damaged), you only need to bear the freight. At the same time, we also can provide free technology consulting.

4. Within 5 days after you received the goods, if you find there are problem with goods, please contact us,

• 72v 2000W rear hub motor(Rear dropout :135mm)
• Sun ringle MTX33/39 Double-wall alloy rims
• 72V 45A Sine wave controller with Controller Bag
• Multifunction SW900 Display
• with 7 speed gears