14 best kits for pressure washers

Product description

Apache Metric hose, gun, wand and nozzle kit. Kit includes: Gun - 3/8" female pipe thread inlet by female metric outlet, with trigger lock; hose - 3700 psi, measures 25-feet length by 5/16-inches diameter, female metric by female metric; metric wand - male metric by 1/4" quick disconnect socket; adapters - 3/8" male pipe thread by male metric, male metric by 3/8" quick disconnect socket, and a female metric by 3/8" quick disconnect plug; spray tips - one each of the following "color coded" 1/4" quick disconnect spray tips - 0 degrees (red), 15 degrees (yellow), 25 degrees (green), 40 degrees (white), and one 65 degrees (black) low pressure soap/chemical tip. Applications: Complete hose/gun/wand/spray tip kit for gas/electric units rated up to 3700 psi.

• Set includes gun, hose, wand, variable nozzle, and adapter for gas or electric pressure washers rated up to 2,600 psi with a metric pump outlet
• Gun has metric inlet and outlet, has a trigger lock for control, and connects to the included 1/4" diameter x 25' long hose
• Wand includes a variable-angle spray nozzle tip with a soap-dispensing function
• Male metric adapter connects two female ends together for accessory attachment
• Maximum temperature is 140 degrees F, and maximum flow is 7.0 gpm

User questions & answers

Question:	Would this work with a pressure washer of 1200 psi
Answer:	You should be good to go as Simoniz gas PW's are 2900-3200 psi and this is rated at 4000 psi. It also has quick connect 3/8" connector if you have a quick-connect hose or you can use the screw on-type if needed so it's pretty much able to run with about any setup you throw at it. I bought a 'turbo tip' to go with mine and that thing really scrubs concrete fast if you've never tried one before.
Question:	Is this compatible with craftsman
Answer:	As others have said, the adapter with the gun fits a M22-14mm hose and adapts to the 3/8 thread on the gun. You can get a M22-15mm adapter on ebay for about $8 if you don't want to change the hose out. It's amazing how may of the cheaper electric pressure washers are now 15mm!
Question:	will this work with a simoniz gas pressure washer ( and fit
Answer:	It is a manual pump. not the best pump but it will work
Question:	will this apache gun nozzle fit 22 mm fittings
Answer:	If it's threads are 3/4" pipe, otherwise you need an adapter. Also the hose is thicker than that flex tube on there so it doesn't twist as easy.

Product description

The 450 PSI – 40V Hydroshot Portable Power Cleaner is the beefier version of the popular standard Hydroshot model. With 130 more PSI (Pounds per Square Inch) and twice the battery, you get a stronger, high-performance, power washing machine. If you get your SUV or RV really dirty, this is the tool for you. If the storm season leaves loads of mud and grime on your decks and driveways, this is the power washing wand for you. If you’ve seen or have the standard Hydroshot and thought, “this is pretty cool, but I want it to be stronger,” this is the Hydroshot for you. Even with all those PSIs, it only pulls 0.90 GPM (Gallons Per Minute). And it only weighs 5.1 lbs, so it’s easy to hold up for long stretches. This model comes with: two 20V 2.0Ah Power Share batteries, 2-Amp Dual-Port Charger, Long Cleaning Lance with 4-in-1 Nozzle, 20-foot Draw Hose, and a Quick-Connect Adapter. There is stronger pressure washers out there, there are even Hydroshots that pack a more powerful punch, but this is the right-sized version for the right jobs. Traditional pressure washers have a separate power source attached that you have to lug around. Not this Hydroshot. Powerful cleaners that are more powerful than this one can damage a vehicle’s finish or strip the paint on the deck. For routine, moderate to tough cleaning of cars, trucks, boats, and around the house, you’ll want this 450 PSI – 40V Hyrdoshot Portable Power Cleaner.

• 7X MORE PRESSURE: Than a garden hose and nozzle. For tougher cleaning jobs, 450 PSI is more cleaning power than the standard Hydroshot models
• 2-SPEED SETTINGS: But you can also switch it down to “Low” at 290 PSI to conserve both water and battery when the cleaning task is a little lighter
• SAME BATTERY, EXPANDABLE POWER: Worx Power Share is compatible with all Worx 20v and 40v tools, outdoor power and lifestyle products
• 4-IN-1 MULTI-SPRAY NozZLE: Four settings, from 0° for the most direct spray, to 15°, 25°, and 40° for a wider cleaning radius
• ON-BOARD BATTERY CHARGE INDICATOR: The “fuel gauge” tells you how much juice you have left so you’ll know when to recharge or switch out batteries
• DUAL-PORT CHARGER: Since this Hydroshot runs on two 20V batteries, we’ve included the two slot charger, to get you back in the game quicker
• DRAW FRESH WATER FROM ANY SOURCE: Just drop the hose into a lake, pool, marina, or bucket—so you can take your Hyrdoshot anywhere

User questions & answers

Question:	Does this model come with 2L bottle adapter
Answer:	340 and 390 should have the same mount
Question:	Can the washer be connected to an existing water hose
Answer:	It shouldn't hurt it... as long as the burner isn't touching it... bolts right up to the Honda GX390.
Question:	Can you hook this directly to a garden hose
Answer:	The attached cord is very long and as such you won't need one. You can use an extension but it has to be 3 prong and must be wired correctly.
Question:	Why would anyone buy this item from you when I can get it for $98.48 with free shipping
Answer:	The 390SS is a integrated hose with reel. You can simply attach the gun to hose and leave it. You wind the hose up and thats it. But in practical use, it works much easier and less risk of tipping if you undo all the hose 30ft and undo a couple coils you get from it being reeled up and thats it. It works very well. If you have not had a PW and dont know that these hoses are stiff, you may complain that they are stiff. most are, besides the gas high pressure rubber ones.

Product features

Draws Freshwater From Anywhere

Hook it up to the hose for the most powerful nozzle you’ve ever had, or drop the included 20’ Draw Hose into a bucket or the lake.

2 Pressure Settings

A light one for more delicate jobs, and then a heavy one for when you’ve gotta get mud off the truck. Just press the button to toggle between the two.

450 psi

It’s the perfect amount of pressure for heavier, but routine, cleaning jobs. Any more pressure and you’re going to start stripping the paint off the boat or the deck.

4-in-1 Pressure Nozzle

In addition to the 2 pressure settings, you can fine-tune it even more by altering the stream intensity: 0°, 15°, 25°, or 40°.

Portable, Convenient Cleaning

Lightweight, portable and ergonomic design that draws from buckets, pools, lakes—or any other freshwater source for effortless outdoor cleaning and maintenance.

Portable and Lightweight

It weighs less than 7 lbs, so even though it’s powerful, anyone can use it. And it can go anywhere. It pulls from any freshwater source, and with the new bottle attachment (not included) you can take that water with you.

20V + 20V = 40V

Our 40V Hydroshot has more power and run-time than our other models. Think of how much cleaner your stuff is going to be. And how much more fun you’re going to have cleaning it.

Product description

The Briggs & Stratton 6198 Pressure Washer O-Ring Replacement Kit replaces worn, damage or lost o-rings in multiple components of pressure washers. Use this kit to restore the o-rings in pressure washer guns, hoses and wands. This replacement kit also includes garden hose filter. Help keep your outdoor power equipment running at peak performance by ordering the Briggs & Stratton 6198 Pressure Washer O-Ring Replacement Kit. Only Briggs & Stratton genuine parts are specially designed to exact OEM standards, manufactured and tested to help deliver optimum performance in Briggs & Stratton engines. Not only are Briggs & Stratton genuine parts guaranteed to fit, but using them also ensures that the Briggs & Stratton engine they are installed on complies with applicable (EPA) emission regulations. For more than a century, Briggs & Stratton branded engines and power equipment have helped consumers get the job done. Known for hard-working, dependable, efficient products, Briggs & Stratton is the world's largest producer of gasoline engines for outdoor power equipment. Briggs & Stratton products are designed, manufactured, marketed and serviced in over 100 countries on all seven continents. Visit www.amazon.com/briggsstratton for more information on Briggs & Stratton and our extensive line of products.

• Replaces worn, damage or lost o-rings
• Restore the o-rings in pressure washer guns, hoses and wands
• Replacement kit also includes garden hose filter
• Help keep your pressure washer running at peak performance
• Genuine OEM replacement part

User questions & answers

Question:	Is this hose compatible with craftsman pressure washer model no
Answer:	Yes- machine wash separately, cold, gentle cycle.
Question:	Where do I put the oil in the Briggs and Stratton electric
Answer:	Try trimming it
Question:	My pressure washer calls for a 6048 o ring kit. will this kit fit
Answer:	It should , they are so comfortable And takes away the majority of my foot pain
Question:	My pressure washer calls for pump oil "6033", but later says it needs a non-detergea
Answer:	I'm mail man who walks 10-14 miles a day. There are also 20+ other mail men who use these. They work like a dream. Who ever said these are for dress shoes has no idea what these are for.

Product features

Briggs & Stratton 6198 Pressure Washer O-Ring Replacement Kit

The Briggs & Stratton 6198 Pressure Washer O-Ring Replacement Kit replaces worn, damage or lost o-rings in multiple components of pressure washers. Use this kit to restore the o-rings in pressure washer guns, hoses and wands. This replacement kit also includes 1 garden hose filter. Help keep your outdoor power equipment running at peak performance by ordering the Briggs & Stratton 6198 Pressure Washer O-Ring Replacement Kit.

Only Briggs & Stratton genuine parts are specially designed to exact OEM standards, manufactured and tested to help deliver optimum performance in Briggs & Stratton engines. Not only are Briggs & Stratton genuine parts guaranteed to fit, but using them also ensures that the Briggs & Stratton engine they are installed on complies with applicable (EPA) emission regulations.

Product description

Sewer Jetter Kit applicable to All Brand Standard M22 Interface Pressure Washer and 1/4'' Fast Connection Pressure Washer Gun.

1.The water jet drain cleaner can be used to remove indoor or outdoor drainage of many types, combined with any type of pressure washer, can easily flush obstacles and maintain flow.

2.High pressure washer hoses can be used to clean cars, motorcycles, floors, windows, driveways, roofs, siding, etc.

Feature:

①Heavy-duty power washer hose, which is oil, weather and abrasionresistant.

②Using high-pressure water streams through 3 kinds of specialized jetting nozzles to dislodge and clear obstruction.

③During the high-speed advancement of WEST BAY sewer jetter hose, our anti-winding swivel connection will rotate together with the hose at the pump joint, so that hose will not entangle.

④Both 14mm and 15mm pumps can be connected.

⑤Durable and Solid Connectors can be firmly connected with pressure washer,gun and jetting nozzle,no leak.

West Bay Sewer Jetter Hose Specification.

Inner Tube: Thermoplastic polyester tube

Thickened Reinforcement: 1/2" hightenacity polyester textile braid（Double Braid）

Cover layer: Black thermoplastic polyurethane chemical resistant

Length: 100 ft

Working Pressure: 5800 PSI - 400 Bar

Burst Pressure: 11000 PSI - 759 Bar

Connection: 1/4'' M-NPT

Hose I.D: 1/4"

Hose O.D: 1/2"

Package include:

1 × sewer jet hose

1 × button nose sewer jet nozzle, orifice 4.0

1 × M22 female to 1/4’’ female NPT coupler

1 × 1/4’’ quick connect plug.

1 × rotating sewer jetter nozzle

1 × corner sewer nozzle

1x waterproof tape

2xspanners

1x box of pearl corsage pin

• [PROFESSIONAL SEWER JETTER KIT INCLUDES]:  1 × 100ft sewer jet hose,1 × button nose sewer jet nozzle, orifice 4.0,1 × M22 female to 1/4’’ female NPT coupler,1 × 1/4’’ quick connect plug,1 × rotating sewer jetter nozzle,1 × corner sewer nozzle.1x waterproof tape, 2xspanners, 1x box of pearl corsage pin. Complete sewer jetter kit to meet your variety need.
• [HIGH QUALITY 5800PSI CLEANER HOSE]: Sewer jetting hose has inner tube, reinforcement and cover. Inner tube is made of thermoplastic polyester. Reinforcement layer is 1/4" high tenacity polyester textile braid which is chemically bonded. Cover layer is made of thermoplastic polyurethane, which can resist weather, oil, abrasion and ozone.
• [3 EFFICIENT SEWER JETTER NOZZLES]:4.0 orifice Button Nose Sewer Jetter Nozzle clears blockage and flush out debris by front 0° spray jet and 3 rear 33° spray jets.4.5 orifice Rotating Sewer Jet Nozzle offers an even cleaning and flushes out debris by 3 backward rotating spray jets which blast into clogged pipe and moves it through pipe. Corner sewer jetter nozzle: 1 water spray sideways that clears blockages at the corner. 3 rear jets at 33° flush out debris loosened by the front jet. Orifice 4
• 【QUICK CONNECT PLUG and FEMALE METRIC M22 to 1/4 Inch FEMALE NPT FITTING】Quick Connect Plug used in a lot of situations where high pressure connections are frequently assembled or disassembled.Ideal for quick exchange of pressure washer outlet, sewer jetter hose, guns and nozzles.It makes a solid connection with quick coupler each time.Pressure washer coupler convert metric M22 14mm female NPT thread to 1/4" Female NPT.
• [COMPLETE SET for WIDELY USE ]: High pressure washer hoses can be used to clean cars, motorcycles, floors, windows, driveways, roofs, siding, sink, toilet, outdoor, indoor and etc. 2 spanners are preapred for easy to install nozzle or coupler, 1 box of pearl corsage pin can help to clean the nozzle blocking, and waterproof tape can help prevent water leak.

User questions & answers

Question:	Will this work with Sun Joe electric pressure washer with 2070psi
Answer:	It's a heavy-duty foam, so could be cut, but the edges are nicely finished and sealed, so I wouldn't advise it.
Question:	Will the jetter clear 4" pvc yard irrigation pipes clogged with tree roots
Answer:	These are not dual density pads. If you would reach out directly to us we can fabricate a dual density.
Question:	Is the M22 thread size 14mm or 15mm
Answer:	Thank you for your interest in our Microdry Anti-Fatigue Memory Foam Kitchen Mat. This kitchen mat is currently made in this color only. Thank you.
Question:	Can this be used with my pressure washer to clear hair clogged drain pipes from my roof to the street
Answer:	Thank you for your interest in our Microdry Anti-Fatigue Memory Foam Kitchen Mat. The fabric on this kitchen mat does absorb liquids, but it is also treated with Scotchgard's stain release formula to help remove stains. Thank you, Microdry Customer Service

Product features

Package list

1 × sewer jet hose 1 × button nose sewer jet nozzle, orifice 4.0 1 × M22 female to 1/4’’ female NPT coupler 1 × 1/4’’ quick connect plug. 1 × rotating sewer jetter nozzle 1 × corner sewer nozzle 1x waterproof tape 2xspanners 1x box of pearl corsage pin

Feature

1. Heavy-duty power washer hose, which is oil, weather and abrasionresistant.
2. Using high-pressure water streams through 3 kinds of specialized jetting nozzles to dislodge and clear obstruction.

• During the high-speed advancement of WEST BAY sewer jetter hose, our anti-winding swivel connection will rotate together with the hose at the pump joint, so that hose will not entangle.
• Both 14mm and 15mm pumps can be connected.
• Durable and Solid Connectors can be firmly connected with pressure washer,gun and jetting nozzle,no leak.

West Bay Sewer Jetter Hose Specification.

• Inner Tube: Thermoplastic polyester tube
• Thickened Reinforcement: 1/2" hightenacity polyester textile braid（Double Braid）
• Cover layer: Black thermoplastic polyurethane chemical resistant
• Length: 100 ft
• Working Pressure: 5800 PSI - 400 Bar
• Burst Pressure: 11000 PSI - 759 Bar
• Connection: 1/4'' M-NPT
• Hose I.D: 1/4"
• Hose O.D: 1/2"

Button Nose Sewer Jetter Nozzle

• 1 front jet at 0° that clears blockages in the clogged pipe.
• 3 rear jets at 33° flush out debris loosened by the front jet.
• Material: corrosion resistant stainless steel
• Connection:1/4" Female Fitting
• Orifice :4.0.

Rotating Sewer Jetter Nozzle

• 3 backward rotating spray blasts into clogged pipe and breaking up the debris along with pulling the hose through the pipe.
• Material: corrosion resistant stainless steel
• Connection:1/4" Female Fitting
• Orifice :4.0.

Mushroom nose nozzle

• 1 water spray sideways that clears blockages at the corner.
• 3 rear jets at 33° flush out debris loosened by the front jet.
• Orifice 4.0. Side port to blast at corners where hose cannot navigate.
• Ideal for cleaning around the corner.

1/4 Inch Female NPT Fitting

• Quick Connect Plug used in a lot of situations where high pressure connections are frequently assembled or disassembled.
• Ideal for quick exchange of pressure washer outlet, sewer jetter hose, guns and nozzles.
• It makes a solid connection with quick coupler each time.

Product description

AUSAIL Pressure Washer Sewer Jetter Kit 

Feature:

①Heavy-duty power washer hose, which is oil, weather and abrasionresistant.

②Using high-pressure water streams through 2 kinds of specializedjetting nozzles to dislodge and clear obstruction

③During the high-speed advancement of AUSAIL sewer jetter hose, our anti-winding swivel connection will rotate together with the hose at the pump joint, so that hose will not entangle.

④Both 14mm and 15mm pumps can be connected

⑤Durable and Solid Connectors can be firmly connected with pressure washer,gun and jetting nozzle,no leak

AUSAIL Sewer Jetter Hose

Inner Tube: Thermoplastic polyester tube

Thickened Reinforcement: 1/2" hightenacity polyester textile braid（Double Braid）

Cover layer: Black thermoplastic polyurethane chemical resistant

Length: 50 ft

Working Pressure: 5800 PSI - 400 Bar

Burst Pressure: 11000 PSI - 759 Bar

Connection: 1/4'' M-NPT

Hose I.D: 1/4"

Hose O.D: 1/2"

Button Nose Sewer Jetter Nozzle

1 front jet at 0° spray angle can clear blockages. 3 rear jets at 33° spray angle can flush out debris loosened by the front jet.

Material: corrosion resistant stainless steel(No:304）

Connection:1/4" Female Fitting

Orifice :4.0

Rotating Sewer Jetter Nozzle

3 backward rotating spray blasts into clogged pipe and breaking up the debris along with pulling the hose through thepipe.

Material: corrosion resistant stainless steel(No:304)

Connection:1/4" Female Fitting

Orifice :4.0

Package Include: 

1 x Sewer Jet Hose(50FT)

1 x Button Nose Sewer Jetter Nozzle

1 x Rotating Sewer Jet Nozzle

1 x 1/4’’ F-NPT to Female M22-（14 mm and 15mm）

1 x Female 1/4’’ NPT to 1/4’’ quick disconnect plug

• ★【Durable Sewer Jetting Hose】Inner tube made of thermoplastic polyester.Thickened reinforcement layer of 1/2" high tenacity polyester textile braid that is chemically bonded(Double Braid）.Cover layer of Black thermoplastic polyurethane that is oil, weather, ozone, and abrasion resistant.ISO 9001 Certified,Pin test each crimp to check proper internal crimp.
• ★【Powerful Cleaning】AUSAIL sewer jetting kit with 2 sewer jetter nozzles clears blockages without the help for Cleaner.Ideal for all types of medium and high-pressure jetting applications,such as sewer and drain pipes.
• ★【2 Efficient Sewer Jetter Nozzles】4.0 orifice Button Nose Sewer Jetter Nozzle clears blockage and flush out debris by front 0° spray jet and 3 rear 33° spray jets.4.5 orifice Rotating Sewer Jet Nozzle offers an even cleaning and flushes out debris by 3 backward rotating spray jets which blast into clogged pipe and moves it through pipe
• ★【Excellent compatibility】Universal works with many gas-powered and electric pressure washers up to 5,800 PSI.Our hose has 1/4'' M-NPT fitting（Equipped with rotatable anti-winding connector）,and a adapter convert to M22 Female that can be applied to all brands of pressure washer(Both 14mm and 15mm pumps can be connected) and 1/4'' quick disconnect plug for most pressure washer guns.
• ★【Customer Service】 - If you encounter any product after-sales problems, you can contact AUSAIL support team at any time，Professional team is always on line.

User questions & answers

Question:	Will this connect to a Sun Joe pressure washer
Answer:	Slides easily on hard surfaces, but not when standing on it. I like that I can easily kick it under my desk when sitting and then slide it right back into place when standing.
Question:	Will this work with my 2800 psi pressure washer
Answer:	Technically it could for sure. It's peel and stick so it would be semi-permanent once adhered to the bottom of the tub.
Question:	Does this make 90 degree turn in 1/4" kitchen sewer line
Answer:	These pads unfortunately aren’t made to be removed. That being said, sometimes it’s possible to remove them and reapply them either with their own adhesive or help from some additional 3M spray adhesive.
Question:	Does the npt connector need to be wrapped with white waterproof tape
Answer:	Yes, we can. Reach out to us directly so we can help you further.

Product description

Our vision:

We are committed to providing more efficient and safer garden management tools for the rest of the world, helping people reducing the tiredness of spraying and cleaning of their garden.



Warranty:

This product is guaranteed against defects for a period of 12 months from date of purchase.

Our goods come with guarantees that cannot be excluded under the American Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage.



Features:

Different power washer tip allows you to clean hard-to-reach areas quickly and easily.

1/4 Quick connection design, up to 3600 PSI Can be attached to a quick-connect wand for swifter application and more.



Application:

5 different pressure washer tips: meet your need in different situations, such as watering flowers and plants, washing car and Clean hard-to-reach areas etc.

Material: PA66 nozzle cover, hardness stainless steel SUS304, brass tips.

High precision pressure washer nozzles angle with a good quality for long time working outside.

Please choose a suitable nozzle color while in different application.



Package included

1 x Red Stainless Steel Nozzle Tip (0 Degree, Model 00025)

1 x Yellow Stainless Steel Nozzle Tip (15 Degrees, Model 15025)

1 x Green Stainless Steel Nozzle Tip (25 Degrees, Model 25025)

1 x White Stainless Steel Nozzle Tip (40 Degrees, Model 40025)

1 x Black Brass Soap Nozzle Tip (65 Degrees, Model 65025)

• Adjustable Snow Foam Lance with 1/4" quick disconnection fitting. Container Capacity: 1 Liter / 0.22 Gallon. Specification: 1000 PSI to 3000 PSI.
• EASY to install: fill some soap into the bottle with warm water to get thick foam; Then connect 1/4" quick connection plug to Pressure Washer Gun or Wand. Finally, adjust the knob on the top to desired foam level and then Foam Blaster will disperse thick foam. The knob adjusts the foam dispensing amount and the nozzle adjusts the sprinkle pattern.
• Adjustable nozzle for accurate mixing and foam generation. Turn the top knob right (-) to get the thickest mixture, adjust the nozzle to get a proper sprinkle pattern, and let it loose.
• 5 Nozzle Tips have different angle (0, 15, 25, 40, 65 degree). Choose different nozzle according to the actual need. Such as watering flowers and plants, washing car. They also can be attached to a Quick-Connect Wand for swifter application and more.
• Application: ideal for Motorcycle, Car Washing; Roofs, Driveways, Siding washing; floors, Windows washing, it is best product for Detailing Trucks or SUVs.

User questions & answers

Question:	I bought this for a coleman powermate 1100 with no quick disconnects. is there a adapter that I need, and where do I install it
Answer:	Well, you can, but it is not really made for the chair to sit on. Sitting in your chair, you won't notice any extra cushion. It is made to cushion your feet, legs and back while standing. When I roll my computer chair into place, I pick up the mat and stand it on its side between the wall and file cabinet, to avoid wear and tear on the mat.
Question:	What’s the best kind of soap to use
Answer:	At the highest I will say is about 3" and the thing about 1.25", it is very comfortable specially when using without shoes.
Question:	Will this work with a powerstroke 2200 electric power washer
Answer:	100% polyurethane foam
Question:	do you know if this works with the sun joe SPX200E
Answer:	yes, see this answered question: https://www.amazon.com/ask/questions/Tx26GQ6GG6X8S64/ref=ask_ql_ql_al_hza

Product features

Feathers

1. Universal foam cannon with 1/4" quick disconnection fits almost all pressure washer.

2. Adjustable foam cannon can mix cleaning fluid with water accurately and generate foam quickly.

3. The bottle can be filled in with 1 Liter cleaning fluid. Spray angle and suction amount of cleaning fluid can be adjusted according to needs.

4. It is used to wash motorcycle, car, roofs, driveways, siding, floors and windows.

5. Working Condition: 1000 PSI to 3000 PSI

6. Max Temperature: 60℃ / 140℉.

7. Bottle Capacity: 1L.

Spray Nozzle Tips set includes:

1 Red Stainless Steel Nozzle Tip (0 Degree),1 Yellow Stainless Steel Nozzle Tip (15 Degree), 1 Green Stainless Steel Nozzle Tip (25 Degree), 1 White Stainless Steel Nozzle Tip (40 Degree), 1 Brass soap nozzle tip (65 Degree).

How to Install Foam Cannon

1. Fill some soap into the bottle with warm water.

2. Connect 1/4" quick connection plug to pressure washer gun or wand.

3. Adjust the knob to desired foam level and then it disperses thick foam.

Product description

Twinkle Star Sewer Jetter Kit for Pressure Washer

Features:

Plumbing Jetter Hose is very durable and can resist weather,oil, ozone and abrasion.

3 Button Noses, 1 front jet at 0° to clear the blockage in the pipe, 3 rear jets at 33° pushes forward and washes loose debris before. Orifice: 4.0, 4.5, 5.5.

Rotating Nozzle rotates 3 rear jets at 33° for shot blasting, the water jet it into the blocked pipe, clear and flush debris. Orifice: 4.5.

Work with lots electric and gas-powered pressure washers up to 4,000 PSI.

Suitable for both hot and cold water.

Specifications:

Length: 100Ft

Weight: 6.03lbs

Maximum pressure: up to 4,000 PSI

Package include:

1 x 100 FT Pressure Washer Hose,

3 x Button Nose - Orifice 4.0, 4.5, 5.5, 1 x Rotating Nozzle,

1 x M22-14 Solid Brass,

1 x Thread Seal Tape,

1 x 1/4 '' Quick Connector.

Note:

Always disconnect the accessory when finished using it. Do not leave the fitting unattended or under pressure when not in use.

• [Pressure Washer Sewer Jetter Kit]: The water jet drain cleaner can be used to remove indoor or outdoor drainage of many types, combined with any type of pressure washer, can easily flush obstacles and maintain flow. 1 x 100 FT Pressure Washer Hose, 3 x Button Nose - Orifice 4.0, 4.5, 5.5, 1 x Rotating Nozzle, 1 x M22-14 Solid Brass, 1 x Thread Seal Tape, 1 x 1/4 '' Quick Connector.
• [Durable Plumbing Jetter Hose]: Small outside diameter flexible and strong toughness sewer line hose with couplings, allowing hose and nozzles to fit through sewer line. PE tube, PVC cover, Dual-layer terylene reinforcement, which is very durable and can resist weather,oil, ozone and abrasion.
• [3 + 1 Sewer Jetter Nozzle]: 3 Button Noses, 1 front jet at 0° to clear the blockage in the pipe, 3 rear jets at 33° pushes forward and washes loose debris before. Orifice: 4.0, 4.5, 5.5. Rotating Nozzle rotates 3 rear jets at 33° for shot blasting, the water unblock pipe, clear and flush debris. Orifice: 4.5.
• [Widely Used]: Work with lots electric and gas-powered pressure washers up to 4,000 PSI. The sewer jetter hose can be used for pressure washer pump with American standard M22-14 Solid Brass. It also can be connect to trigger gun or pressure washer wand with 1/4" quick connector.
• [Tips]: Always disconnect the accessory when finished using it. Do not leave the fitting unattended or under pressure when not in use. If for any reason you're not 100% SATISFIED, please let us know and our customer team will help you RETURN OR REFUND.

User questions & answers

Question:	Would this work for a ryobi power washer
Answer:	My 2' x 11' x 9/16" mat was rolled up when shipped and it laid down nice and flat after a day. I am very happy with it.
Question:	How wide are the bits
Answer:	I can't speak to the durability or longevity of using it outdoors, but I really don't see why not. Especially if it's a under a roof, I think it'll work just fine outdoors.
Question:	What do the different orifice sizes mean and how do you know which to use
Answer:	The mat comes flat and not folded.
Question:	Does this fit a portland 1750 psi electric power washer
Answer:	I would think so, it grips pretty good. I am using on a tile floor and it doesn't slip at all.

Product features

Twinkle Star Sewer Jetter Kit

The water jet drain cleaner can be used to remove indoor or outdoor drainage of many types, combined with any type of pressure washer, can easily flush obstacles and maintain flow.

Plumbing Jetter Hose is very durable and can resist weather,oil, ozone and abrasion.

Work with lots electric and gas-powered pressure washers up to 4,000 PSI.

Suitable for both hot and cold water

Note: Always disconnect the accessory when finished using it. Do not leave the fitting unattended or under pressure when not in use.

• ✨【Selkie SANDBLASTING GUN】: Selkie wet sandblasting kit provides an alternative to traditional sandblasting. They are great at removing rust, paint, stains or any unwanted material. Plus, they don’t create dust like a traditional sandblaster. Easily prepare and clean stubborn materials from any type of irregular surface.
• ⚒ 【SPECIFICATIONS】: The sand blasting gun features a goggle, 10 feet hose, 16 inch pressure washer wand (water input), 17 inch sand wand (sand input), four hose clamps and extra two replacement ceramic nozzle kits.
• ✨ 【IDEAL SANDBLASTING GUN】: These kits are easy-to-use, Quick Connect Inlet to Gun，Individual Replacement Parts Available，Max Pressure Rating 5000 PSI，Max Flow Rating 8 GPM3000 PSI @ 4 GPM or Greater，Temperature is up to 140ºF/60ºC，stable characteristics.
• ⚒ 【VARIETY OF APPLICATIONS】: Designed to blow dust, water, and cleaning abrasives to remove rust, paint, scale, and other stubborn materials from various surfaces; Clean off your machinery and engine compartments or clear your driveway and barn doors of debris with one of these sand blasting guns.
• ✨ 【BUILT TO LAST】: Built for durability, strength, and longevity, this portable sand blaster gun kit is made of premium materials that prevent rust and corrosion; The chrome plated gun is durable and is compatible with the copper nozzle fittings and pick-up tube; A small 1/4-inch NPT inlet connects to the heavy-duty rubber hose; Perfect tool kit for cleaning automotive parts.

User questions & answers

Question:	I have a Iron gate with oil paint and rust work
Answer:	I can't measure the thickness myself but I'm very satisfied with it.
Question:	What are the minimum requirements of a pressure washer for this blasting nozzle product to work effectively? gpm? pressure
Answer:	This is not a completely flat smooth rug. It has little raised squares (see the photo of the close up). Although it would protect the floor, I think it will be hard to move around on the rug. Perhaps a hard rubber floor protector rather than a rug.
Question:	What kind of sand do you recommend
Answer:	This is more of a commercial-grade anti-fatigue floor mat used for people who stand for long periods of time to help reduce stress and pressure on the feet, legs, back, etc. Thanks, American Floor Mats
Question:	What items come in kit
Answer:	To offset expenses incurred while transitioning from the 3 1/2' x 3 1/2' mat.

Product features

SELKIE WET SAND BLASTING KIT

Selkie wet sandblasting kit provides an alternative to traditional sandblasting. They are great at removing rust, paint, stains or any unwanted material. These kits are relatively inexpensive and very easy-to-use. Plus, they don’t create dust like a traditional sandblaster.

USE THE WET SANDBLASTER TO BLAST

WHAT TO EXPECT :

NO FLASHRUST - OUR RUST INHIBITOR STOPS FLASHRUST IN ITS TRACKS. APPLY RIGHT AFTER FOR BEST RESULT

NOZZLE - Equipped with a Nozzle . The Nozzle is easily replaceable, letting you use the equipment longer.

GOOD COMPATIBILITY - It includes 1/4" quick-connect adapter

HOW EASY IS IT?

Place the sand probe in a bucket of sandblast media, keeping the probe’s air intake above the sand, Connect the sandblaster attachment to your pressure washer wand. Start the pressure washer, with the lance pointed away from your body and project.

Most models feature a male quick coupler that fits in place of the nozzle. Once the pressure washer is running, the velocity of the water draws dry sand through the hose and into the stream. The combination of high-pressure water and sandblast media quickly strips away unwanted paint or rust.

Product description

Wet sand blaster for pressure washer is suction-fed injection of sand into water system.

Working pressure of pressure washer sandblaster attachment is up to 5000 PSI. Temperature is up to 140°F/60℃.

The pressure washer sandblasting attachments have a goggle, 10’ hose, 16’’ pressure washer wand (water input), 17’’ sand wand (sand input), permanent nozzle (output) and two hose clamps. .

Application: pressure washer sandblaster kit works for abrasive cleaning. Great for removing rust, graffiti, paint, baked on grease.

Pressure washer sand blasting attachments use dry silica sand, baking soda or washed and dried river sand.

• Orifice 3.5. Minimum Flow Rate: 3 GPM. Minimum Pressure: 3000 PSI. Please check image 4 to choose the size of orifice. If you need orifice 2.5, please order "Tool Daily Pressure Washer Sandblasting Kit, Wet Sandblaster Attachment, 2500 PSI".
• The pressure washer sandblasting attachments have a goggle, 10’ hose, 16’’ pressure washer wand (water input), 17’’ sand wand (sand input) and two hose clamps.
• Replacment Nozzles are available. Product "Tool Daily Pressure Washer Sandblasting Nozzle, Replacement Wet Sandblaster Attachment, 5000 PSI, 2-Pack". Working pressure of pressure washer sandblaster attachment is up to 5000 PSI. Temperature is up to 140°F/60℃.
• Application: pressure washer sandblaster kit works for abrasive cleaning. Great for removing rust, graffiti, paint, baked on grease.
• Pressure washer sand blasting attachments use dry silica sand, baking soda or washed and dried river sand.

User questions & answers

Question:	Can I get 3.0 orifices when I order this
Answer:	This kit is missing some of the piece that were in the 6048. The color coded o rings are the same size. The screen that go in where the gun attaches to the hose and the black o ring are not included. If that’s what you need this kit will not work for you.
Question:	how do I order the right one for my pressure washer
Answer:	this is pump oil not engine oil
Question:	Two different sands tried. Both completely dry and using a 4400 psi washer. Suction is not enough to pull the sand. Any suggestions
Answer:	If you mean the outside edge of the mat....I just went outside & measured it and it's 1" wide.
Question:	What sand is good to strip paint off car without Messi g up the metal? I have glass bead sand 40 grit but it’s expensive and suggestions
Answer:	These mats have a recycled carpeted surface and a solid rubber backing that will prevent water from leaking/draining through from the top to the floor below. Also, these mats have a water dam border to help prevent moisture from running off the sides of the mat. https://www.amazon.com/gp/offer-listing/B0040H71EW/?seller=ASIRD3RM6OQ4 Thanks, American Floor Mats

Product features

SPECIFICATION

Application

Pressure washer sandblaster kit works for abrasive cleaning. Great for removing rust, graffiti, paint, baked on grease.

How to Set Up

1. Connect 1/4’’ quick connect plug (B) to pressure washer trigger gun or wand.

2. Insert sand wand (C) into media (dry silica sand, baking soda or washed and dried river sand). Please make sure the sand is dry, or it will not work.

3. Turn on the pressure washer. Unlock the trigger gun, then water and sand will come out from permanent nozzle (A). Please make sure the part D is above permanent nozzle (A). If the part D is underneath permanent nozzle (A) as the image shown, the water will go into the hose of sand, wet the sand and then sand will not be sucked up.

4. After work, please dry the cleaned goods as soon as possible, otherwise they will rust again the next day.

Product description

Sewer jetting kit include sewer jet hose, button nose sewer jet nozzle, rotating sewer jetter nozzle, corner sewer nozzle, M22 female to 1/4" female NPT coupler and 1/4" quick coupler plug.



Sewer jetting hose has inner tube, reinforcement and cover. Inner tube is made of thermoplastic polyester. Reinforcement layer is 1/4" high tenacity polyester textile braid which is chemically bonded. Cover layer is made of thermoplastic polyurethane, which can resist weather, oil, abrasion and ozone. Jetter sewer hose is ISO 9001 Certified and pin test each crimp to confirm proper internal crimp.



Button nose sewer jet nozzle: 1 front jet at 0° that clears blockages. 3 rear jets at 33° flush out debris loosened by the front jet. Orifice 4.0



Rotating sewer jetter nozzle: 3 backward rotating spray blasts into the clogged pipe and moves the nozzle through the pipe. At the meantime, it provides an even cleaning and flushes out debris. It is easy to slide into sewer lines and drain pipes. Used for flushing debris or cleaning fixed pipes when connect to a sewer jetter hose. Orifice 4.5.



1 water spray sideways that clears blockages at the corner. 3 rear jets at 33° flush out debris loosened by the front jet. Orifice 4.0. Side port to blast at corners where hose cannot navigate. Ideal for cleaning around the corner.

• Sewer jetting kit include 100 feet sewer jet hose, button nose sewer jet nozzle, rotating sewer jetter nozzle, corner sewer nozzle, M22 female to 1/4’’ female NPT coupler and 1/4’’ quick coupler plug.
• Sewer jetting hose has inner tube, reinforcement and cover. Inner tube is made of thermoplastic polyester. Reinforcement layer is 1/4" high tenacity polyester textile braid which is chemically bonded. Cover layer is made of thermoplastic polyurethane, which can resist weather, oil, abrasion and ozone. Jetter sewer hose is ISO 9001 Certified and pin test each crimp to confirm proper internal crimp. Bend radius of the hose is 4.3 inch.
• Corner Sewer Jetter Nozzle: 1 water sideways that clears blockages at the corner. 3 rear jets at 33° flush out debris loosened by the front jet. Orifice 4.0. Side port to blast at corners where hose cannot navigate. Ideal for cleaning around the corner.
• Button Nose Sewer Jet Nozzle: 1 front jet at 0° that clears blockages. 3 rear jets at 33° flush out debris loosened by the front jet. Orifice 4.0
• Rotating Sewer Jetter Nozzle: 3 backward rotating blasts into the clogged pipe and moves the nozzle through the pipe. At the meantime, it provides an even cleaning and flushes out debris. It is easy to slide into sewer lines and drain pipes. Used for flushing debris or cleaning fixed pipes when connect to a sewer jetter hose. Orifice 4.5.

User questions & answers

Question:	Will this connect to greenworks electric pressure washer
Answer:	Both 14mm and15mm is ok
Question:	Can this be used to clean out a clogged gutter
Answer:	There’s a few unknowns to accurately answer this question. What’s the diameter of the pipe, is it rigid or corrugated and what is the psi of your pressure washer. I was using a 3000 psi in a 4” corrugated tile and worked very well. I also used it feeding it through a downspout and into a 4” corrugated tile for distance of about 60’ and worked very well. The higher the psi of the pressure washer the better it pulls itself through the pipe. Also have to consider how many and how tight of bends you have in the pipe. Hope this helped to answer your question or at least give a little more insight on what you need to consider. Worked great for me under my conditions.
Question:	I purchased this and then found out my Excell Honda pressure washer existing hose fittings were too large , is there an adapter for 5/16” to
Answer:	From the look of the hose it appears to be the same one that I use. It merely connects to the side of the water pump using the nipple provided on the pump. If your machine has this nipple, it should work.
Question:	Will this work down and thru a 4" p-trap
Answer:	It goes in the gear box in the water pump on the electric pressure washer

Product features

Feature of Hose

Application

1. Corner sewer jetter nozzle: 1 water spray sideways that clears blockages at the corner. 3 rear jets at 33° flush out debris loosened by the front jet. Orifice 4.0. Side port to blast at corners where hose cannot navigate. Ideal for cleaning around the corner.

2. Button nose sewer jet nozzle: 1 front jet at 0° that clears blockages. 3 rear jets at 33° flush out debris loosened by the front jet. Orifice 4.0

3. Rotating sewer jetter nozzle: 3 backward rotating spray blasts into the clogged pipe and moves the nozzle through the pipe. At the meantime, it provides an even cleaning and flushes out debris. It is easy to slide into sewer lines and drain pipes. Used for flushing debris or cleaning fixed pipes when connect to a sewer jetter hose. Orifice 4.5.

4. Sewer jetter hose has a solid end which connects to sewer nozzle. The other end is swivel which releases stress between sewer hose and gun / pressure washer oulet.

Package List

1 × sewer jet hose

1 × button nose sewer jet nozzle, orifice 4.0

1 × M22 female to 1/4’’ female NPT coupler

1 × 1/4’’ quick connect plug.

1 × rotating sewer jetter nozzle

1 × corner sewer nozzle

• SANDBLASTING PACKAGING KITS: Our pressure washer sandblasting includes 3m hose, 16" pressure washer wand (water input), 15 3/4" sand wand(sand input), a goggle, 4 hose clamps, 4 ceramic nozzles, and 2 rubber bands.
• WORKING PRINCIPLE: The pressure sandblasting kit is used to inject sand into the water system for cleaning. Use dry silica sand, baking soda or washed river sand for better results.
• APPLICATION: The pressure washer sandblaster kit is mainly used to remove rust, graffiti, paint and grease baking, and is ideal for household and factory abrasive cleaning!
• HIGH-QUALITY PERFORMANCE: Sandblasting kits are made of durable materials, brass and stainless steel, which are resistant to corrosion, abrasion, and stable performance. Its working pressure can reach 5000PSI and the temperature can reach 60 ℃ / 140 ° F.
• EASY to USE: 1/4 inch quick connector on the end of a gun, suitable for most pressure washer. It is one of the best choices for Father's Day gifts.

User questions & answers

Question:	How to install sand extraction cleaner
Answer:	It didn't work when I tried to run it in the main drain, so I put a hole in the straight part of the PVC. But it did work when I tried underneath the kitchen sink but I have to remove the P-trap and start from there.
Question:	Is the product actually the same as the picture
Answer:	No, it is too much trouble to wrap the waterproof tape,this sewer jetter hose fitting has a rubber ring and the sealing effect with jetter nozzle is perfect.
Question:	What is the flow requirement of the pressure washer
Answer:	Dear friend, We suggest you use at least 3200PSI pressure washer, 2070 psi may not have good effect, hope this answer can help you. Thanks.
Question:	Can the ceramic nozzle be replaced
Answer:	I like the sewer jetter kit and it works effectively for debris dirt and mud. I used it on my French drains and some of the foundation drainage, and it was effective. It is a water pressure washer and I doubt that it would clear tree roots. It might give them a good bath, But I would doubt that it would clear them from the pipe. I would look for something with more aggressive rotating action like roto-router with blades, which you can Ranch. The follow up question is, if roots are penetrating the pipe, which is not unusual, the problem will likely recur. Best of luck.

Product description

Sandblast DIY restoration projects, surfaces, and even rusty tools with an advanced pressure washing sandblasting kit from Top Shepherd's. Are you looking to remove old paint, greasy or oil residue, unsightly graffiti, or other surface impurities using a high-powered water pressure washing, but it simply isn’t working? If so, you need the Top Shepherd's Pressure Washer Sandblasting Kit. Complete with all the tools and accessories you’ll need to hook it up in seconds our sand blaster attachment offers far superior surface cleaning because it can utilize dry silica sand, baking soda, or even river sand. In fact, the nozzle, wand, and hose work together to provide up to 5000 PSI of serious cleaning power, so you can get that job done faster and more efficiently. Product Details: Pressure Washing Sandblasting Kit Wet Sandblasting Attachment Strong, High-Powered 5000 PSI 1/4” Quick Disconnect Fitting Max Temperature Rating: 140°F/60℃ Removes Rust, Paint, Graffiti, Grease, and Oil Compatible with Dry Silica Sand, Baking Soda, or Dried River Sand Includes 10’ Hose, 16” Pressure Washer Wand, 17” Sand Wand, and 2 Clamps Quickly strip away rust, paint, and other surface impurities with a Top Shepherd's pressure washer sandblasting nozzle with accessories by clicking Add to Cart above now.

• Full Sand Blaster for Pressure Washer Kit – This sandblaster pressure washer set comes with a 16” water input wand, long 10’ hose, 17” sand input wand, and two hose clamps to help you start working on stripping surfaces quickly.
• Multipurpose Pressure Washer Sandblaster – Our sandblaster for pressure washer use can be used with standard dry silica sand, common baking soda, or even dried river sand to give you more options for cleaning and stripping surfaces.
• High-Powered Pressure Washer – Sand blaster attachment and wet sandblasting kit for pressure washer provides up to 5000 PSI of pressure and supports temperatures up to 140°F to keep from overheating while pumping out cleaning power.
• Cleans Surfaces Quickly – This pressure washer kit is a versatile sand blaster pressure washer because it can strip away thick paint, baked on grease or oils, rust on metals, spray paint or graffiti, and other surface blemishes with minimal effort.

• Package Includes: 2 pack M22-14 swivel + 3/8" plug, 2 pack 3/8" QD + M22-14 male, 2 pack 3/4" female + 1/2" quick connect, 2 pack 1/2" plug+ 3/4" male.
• Attention: M22-14 SWIVEL SELL IS 14mm FITTING. INSIDE DIAMETER IS 14mm, NOT 15mm. If your fitting is 15mm, it may cause leakage. SO NOT FIT some electric pressure washer with M22 15mm fitting.
• Easy Connect & Disconnect: Two sets of quick connectors connect the pump outlet to the pressure washer hose or the pressure cleaning hose to the gun. The other two quick connection kits convert 3/4" threads into quick release connectors and connect all 3/4"standard garden hoses to the inlet of the electric washer pump.
• High Working Pressure: Working Pressure is up to 5,000 PSI. Made of corrosion resistant brass.
• SATISFACTION GUARANTEE! If for any reason you are not SATISFIED, please let us know and our customer service team will help you RETURN OR REFUND.

User questions & answers

Question:	What size is the connection? Not the hose. My connections are 1/2" the hose is
Answer:	3/8"
Question:	I need to connect a 3/8” male fitting from my powerwasher hose to my twinkle star surface cleaner pressure gun. i am not finding the adapter for this
Answer:	What is the size on the gun(1/4)?
Question:	I can not connected to water pipe
Answer:	Remember to go counterclokwise when connecting to the water pipe.
Question:	I have a hose with no head it looks like it was cut off so it’s just the hose it self can this still connect to it with no leaking
Answer:	Nope. You need a new hose. If you look at the product description (on Amazon) it has a good picture showing connection types.

Product features

Twinkle Star High Pressure Washer Adapter Set

Design for high pressure washer hose, pressure washer pump, pressure washer gun, easy set up and take down.

Max. Working Pressure 5000 PSI, made of corrosion resistant brass.

Male female kit was made with precision process, easy connect and disconnect.

Attention:

M22-14 SWIVEL SELL IS 14mm FITTING. INSIDE DIAMETER IS 14mm, NOT 15mm. If your fitting is 15mm, it may cause leakage. SO NOT FIT some electric pressure washer with M22 15mm fitting.

Product description

MDS 8-Part Pressure Washer Replacement Kit, 5 Quick Connect Tips, 3600 PSI Spray Gun, 25' 3200 psi Hose, 16" Wand.

• 【100% Adaptability】The high-end pressure washer gun, extension wand, and spray nozzle tips paired with the MOST POPULAR YAMATIC 25 FT power washer hose, which ensures that each part work perfectly to achieve the best performance.
• 【Anti-slip & Shockproof Handle】With shockproof reinforced plastic ribbing throughout the entire body of the gun supporting the hose and protecting your hands. Comfortable Washing Time!
• 【Durable & Easy Pull Trigger Lock】 Designed with easy pull red trigger lock which is more than 10,000 times durability test for your long time using,Easy job all the time
• 【Full range of multi-purpose】Easy to reach places that are hard to get.Meet your requirements for outdoor cleaning and light industrial cleaning.

User questions & answers

Question:	will this fit my earthwise
Answer:	Yes, it works.
Question:	Will this fit a black and decker power washer model 11ble
Answer:	For Sun joe SPX200E, SPX1000, SPX1500, SPX2000, SPX200E, SPX201E, SPX2500, SPX2598, SPX6000, you need special adapter. You can buy below foam cannon and adapter. Product: M MINGLE Foam Cannon, Replacement Parts for Sun Joe SPX Series Pressure Washer, with 5 Nozzle Tips, 1/4 Inch Quick Connector
Question:	i have a clean force HD Washer...would it fit this one
Answer:	Yes,the sun joe use M22 15mm fitting,I bought one and used it with sun joe SPX3000 electric pressure washer,it worked great
Question:	Will this work with my Homdox 3500 psi electric pressure washer
Answer:	Our AUSAIL sewer jetter kit can work perfectly with 2800psi pressure washer.The adapter convert to M22 Female that can be applied to all brands of pressure washer(Both 14mm and 15mm pumps can be connected) and 1/4'' quick disconnect plug for most pressure washer guns.