10 best rated drain cleaner

Product description

EARTHWORM Commercial Drain line Grease Trap Treatment Cleaner is ideally suited to clean almost every type of drain and will also control their odors. Regular use of EARTHWORM will prevent clogs buildup before they start by eliminating the build-up of organic material in your drain lines and grease traps. EARTHWORM can be used in grease traps kitchen and bathroom sink drains, floor drains, bathtub and shower drains, as well as boat and RV holding tanks and grease traps. Unlike those drain cleaners with harmful, caustic chemicals, EARTHWORM is safer for use in garbage disposals and will keep smelling fresh. Citrus & sage fragrance Natural bio-enzymatic process No harsh chemical residues Removes build-up Helps stop clogs before they start Natural enzymes won't damage plumbing Helps drains & grease traps smell fresh EARTHWORM products use a naturally- occurring process to break down organic materials. All living things contain enzymes. Our bodies use about 75,000 of them to help perform tasks like breathing and digesting. We've harnessed these enzymes to break down food, grease and almost any other organic material. Enzymes act as a biological catalyst to increase the rate organic material is broken down. Instead of scrubbing, the natural bio-enzymatic process does most of the work, which is why we say, "let the worm do the work." And when the task is completed, no harsh chemical residues are left behind.

• Grease Trap Treatment Cleaner Natural bioenzymatic process
• Removes build-up and helps stop clogs before they start
• Citrus & sage fragrance, keeping your drains smelling fresh
• Natural enzymes won't damage plumbing
• Liquid Drain Opener, No harsh chemical residues; safer for children and pets

Product description

The SewerFlex 150 Ft sewer jetter for gas-powered pressure washers up to 2.8 GPM is designed to thoroughly clean main drains, landscaping drains and septic field lines from 3" ID to 4" ID. Helps you thoroughly scrub and flush larger drains that have long-sweep sewer elbows.

• For cold-water pressure washers rated up to 2.8 GPM
• Rated water temperature: up to 160 Degrees F
• Sewer Jetter hose ID: 0.25 IN
• Sewer Jetter hose OD: 0.48 IN
• Nozzle OD (widest point): 0.65 IN
• Nozzle-end length (nozzle and threaded fitting): 2.48 IN
• Recommended for: 3" to 4" ID PVC (plastic) and cast iron drains
• Pressure washer adapter and nozzle are removable to expose 1/4 NPT male threads

IMPORTANT:

• NOT for use in lateral lines less than 3" ID, ceramic (clay) or Orangeburg drains; can't remove tree roots and large solid objects like rocks.
• This poly hose sewer jetter is designed for 3" to 4" ID drains that have long sweep sewer elbows; NOT recommended for use in indoor drains less than 3" ID.
• CANNOT pass through shower floor drains, sink traps, laundry drain traps, toilets, short radius elbows and fittings, and most indoor lateral lines.
• Sewer jetter rated working pressure is 4,200 PSI - but will overload (produce zero cleaning force) with all pressure washers over 2.8 GPM.
• Not compatible with any electric or hot water pressure washer, regardless of PSI rating.

• 150 FT sewer jetter has a custom NOZZLE that PULLS ITSELF deeper into slow running drains, BREAKS APART stubborn clogs, SCRUBS AWAY greasy build-up off the sides of pipes, and FLUSHES OUT dirty debris for more THOROUGH CLEANING than an electric drain snake, plumber's auger or sewer rod.
• Powered by your GAS pressure washer (purchased separately) rated up to 2.8 GPM. NOT COMPATIBLE with electric pressure washers. DO NOT attempt to connect directly to a garden hose.
• Stainless steel NOZZLE has THREE larger BACK JETS to power the sewer jetter through drains, and ONE smaller FORWARD JET to help break up dense clogs. IDEAL for cleaning and flushing GREASE, SEWAGE, SANITARY PAPER, FOOD RESIDUE, SILT, CLAY, LEAVES, YARD DEBRIS, ICE, and IRON OCHRE clogs.
• Helps you unclog 3" to 4" ID MAIN DRAINS, LANDSCAPING DRAINS and SEPTIC LINES that have long-sweep drain elbows and fittings. NOT recommended for lateral drain lines less than 3" ID.
• Assembled COMPLETE and READY TO USE - includes 150 foot drain cleaning SEWER JETTER HOSE, stainless steel NOZZLE, standard M22 male ADAPTER for most gas pressure washers, miniature NOZZLE CLEANING TOOL, protective vinyl CAP, reusable waterproof BUNDLE TIE for easy roll-up and storage, QUICK START CARD and label instructions.

Product description

Specifications:

Orifice 4.0, 4.5

Working Pressure is rated to 4400 PSI.

Burst Pressure is rated to 11000 PSI



Features:

M22 female to 1/4-inch female NPT coupler and 1/4 inch quick connect plug

Rotating nozzle with 3 backward spouts, which is easy to slide into drain pipes and sewer lines. The Orifice is 4.5. Laser nozzle has 1 front jet and 3 rear jets. The 1 front jet at 0°spray angle can clear blockages and 3 rear jets at 33°spray angle can flush out debris loosened by the front jet. The orifice is 4.0



Hose material: Sewer jet hose is ISO 9001 Certified and it is made of 3 parts:

1. Inner tube is made of thermoplastic polyester to provides strong toughness and can be stretched without breaking.

2. Cover layer is made of thermoplastic polyurethane to be able to resist oil, weather, ozone, and abrasion.

3. Reinforcement layer is chemically bonded of 1/4 high tenacity polyester textile braid.



Sewer jetter hose has a solid end which connects to sewer nozzle. The other end is swivel which releases stress between sewer hose and gun / pressure washer outlet



Package Included:

1 x Sewer jet hose,

1 x Button nose

1 x Rotating nozzle,

1 x M22 coupler

1 x 1/4 inch quick connect plug.



Note:

Please check and comfirm the detail of this Sewer Jetter Kit carefully before your purchasing

Any problem, please contact us for help and we will response within 24 hours!

• 【All Sewer Jetter Kit】：Come with sewer jet hose (50 FT or 100 FT), rotating sewer jetting nozzle, laser sewer jet nozzle (button nose), M22 female to 1/4 inch female NPT Coupler and 1/4 inch quick connect plug. Working Pressure is rated to 4400 PSI. Burst Pressure is rated to 11000 PSI
• 【Sewer Jetter Hose】:The sewer jetter hose can connect to pressure washer pump with M22 coupler (convert metric M22 14mm female NPT thread to 1/4" Female NPT). It can also connect to trigger gun or pressure washer wand with 1/4” quick disconnect plug
• 【Rotating Nozzle】:Rotating nozzle with 3 backward spouts, which is easy to slide into drain pipes and sewer lines. The Orifice is 4.5. Laser nozzle has 1 front jet and 3 rear jets. The 1 front jet at 0°spray angle can clear blockages and 3 rear jets at 33°spray angle can flush out debris loosened by the front jet. The orifice is 4.0
• 【Hose Super Quality】: Inner tube is thermoplastic polyester to provides strong toughness and can be stretched without breaking. Cover layer is made of thermoplastic polyurethane to be able to resist oil, weather, ozone, and abrasion. Reinforcement layer is chemically bonded of 1/4 high tenacity polyester textile braid.
• 【Both Hose End】: Sewer jetter hose has a solid end which connects to sewer nozzle. The other end is swivel which releases stress between sewer hose and gun / pressure washer outlet

Product description

The SewerFlex 50 FT professional grade sewer jetter with FOUR BACK JETS and NO forward jet. ONLY for ELECTRIC and GAS pressure washers (up to 2.8 GPM) that have a METAL SPRAY LANCE with a threaded BRASS inlet fitting. Helps you thoroughly clean more sizes of drains, from 1-1/2" ID to 4" ID.



Helps remove stubborn, greasy and dirty clogs from main sewer drains, indoor lateral lines, landscaping drains, and outdoor drain tiles. Flexible, higher-strength sewer jetter hose has a steel braided center jacket that retains an ultra-compact nozzle end – with unbeatable cleaning force, yet up to 70% more compact than generic poly hose jetters.



IMPORTANT INFORMATION:

• Only for cold-water PRESSURE WASHERS (sold separately) rated up to 2.8 GPM that have a trigger gun with a METAL SPRAY LANCE and a threaded BRASS inlet fitting. DO NOT attempt to connect to a pressure washer with a plastic spray lance, to a pressure washer rated over 2.8 GPM, or directly to a garden hose.
• COMPARE and MATCH the image at the top of this page – showing a METAL spray lance with a threaded BRASS inlet fitting – to your trigger gun spray lance before ordering.
• To avoid clogging the sewer jetter nozzle with debris from open hoses, always FLUSH ALL SUPPLY HOSES and YOUR TRIGGER GUN with CLEAN WATER for 30 SECONDS before attaching the sewer jetter.
• Before ordering, confirm that a low-cost drum auger (Cobra 86250 or similar) can pass its FULL LENGTH into the drain opening; if your drum auger can't pass through the drain, the sewer jetter also WON'T PASS THROUGH.
• Sewer jetters usually can't pass directly through toilets, bathtub drains, sink traps or laundry drains so you may need to REMOVE THE FIXTURE OR TRAP, or use an ALTERNATE DRAIN OPENING to reach the clog.
• DO NOT USE in clay (ceramic) pipes, tar composite pipes, drains that could have tree roots, rocks, or pipes with preexisting structural damage.

• 50 FT SEWER JETTER works ONLY with PRESSURE WASHERS that have a trigger gun with a METAL SPRAY LANCE, and a THREADED BRASS fitting on the inlet of the metal lance. See PRODUCT IMAGES on this page for compatible trigger guns and pressure washer models. NOT COMPATIBLE with pressure washers that have black PLASTIC spray lances. BEFORE ORDERING read and follow all IMPORTANT INFORMATION in the Product Description section. NOT COMPATIBILE with machines over 2.8 GPM.
• Powerful RAM NOZZLE with FOUR BACK JETS (NO forward jet) maximizes the scrubbing force and cleaning distance from compatible ELECTRIC pressure washers. IDEAL for cleaning and flushing GREASE, SEWAGE, SANITARY PAPER, FOOD RESIDUE, SILT, MUD, LEAVES and YARD DEBRIS. DO NOT use in drains that are packed with hard, solid material like ice, dried clay, rocks or tree roots.
• SLIMMER, STRONGER 50 FT sewer jetter helps you unclog more types of INDOOR and OUTDOOR DRAINS. Powered by your ELECTRIC or GAS pressure washer rated up to 2.8 GPM.
• PULLS ITSELF deep into slow drains, BREAKS APART CLOGS, SCRUBS GREASY SLUDGE off the sides of pipes, and FLUSHES OUT DIRTY DEBRIS for more THOROUGH CLEANING than an electric drain snake, plumbers' auger or sewer rod.
• ASSEMBLED COMPLETE AND READY TO USE - includes 50 foot drain cleaning hose, stainless steel nozzle, M22 male threaded adapter, protective vinyl cap, nozzle cleaning tool, reusable waterproof bundle tie and instructions.

User questions & answers

Question:	Hi, for the seller, thanks. it's yard drains 2 inch, various plugs, grass growing out of drain etc. maybe i need to buy a more powerful gas pw
Answer:	Hi, please let us know the manufacturer and model number of your current pressure washer and we'd be glad to help. Please also confirm that the landscape drain openings are covered with grass - but there is nothing (like tree roots) growing inside the drain. IMPORTANT: a sewer jetter that's powered by a consumer pressure washer can't remove tree roots in the drain. Nozzle force increases roughly with GPM squared, so a gas pressure washer up to 2.8 GPM can give you at least three (3) times the nozzle force of most electric machines.
Question:	Can you run this thru 2' Pee Trap
Answer:	No, this sewer jetter should NOT be run through a P-trap under a sink. Like any sewer jetter, you'd remove any items that are stored under the sink, put down towels and a bucket to contain any drips, remove the P-trap, and insert the sewer jetter into the drain opening that you've exposed by removing the trap. If your home has cast iron pipes with rough and corroded inside surfaces, before you attach the sewer jetter to your pressure washer trigger gun it may be necessary to take the sewer jetter hose coil in your hand and rotate the coil as you push the sewer jetter nozzle into the drain opening, so that the nozzle end snakes and flips through any rough, short radius elbows that are close to the opening.
Question:	Will this work on a green work electric presurre washer model
Answer:	No, if you have a Greenworks model GPW1950 pressure washer, the trigger gun has a black PLASTIC spray lance that won't fit the M22 threaded inlet fitting on this SewerFlex 50 Ft Premium Drain Cleaner. You can search online for a "50 Ft High Thrust Drain Cleaner for Greenworks" to find a compatible sewer jetter that's sold elsewhere.
Question:	Can the nozzle unscrew from the hose and if so, what size threads ar on the hose
Answer:	This drain cleaner comes with a miniature nozzle cleaning tool that can help you clean the nozzle jets without removing the nozzle. If you do need to remove the nozzle, you can carefully unthread it using a small adjustable wrench to secure the nozzle and a set of pliers to secure the metal hose fitting. Do not grab or twist the hose. Before replacing the nozzle, you should check to be sure that the white sealing ring is in place inside the nozzle, and then sparing apply removable hydraulic thread sealant (such as Loctite 545 or equivalent) to the second and third rows of fitting threads - using care not to spill any sealant into the nozzle jets. The compact nozzle-end fitting has special 1/8 BSPP (parallel) threads that require a nozzle with an internal sealing ring.

Product description

The SewerFlex 50 Ft sewer jetter is designed to thoroughly clean main sewer drains, landscaping drains, drain tiles and gutter downspouts from 3" ID to 4" ID. Only for select electric pressure washers (up to 1.8 GPM) that have a metal spray lance with a threaded brass inlet fitting.



Helps you thoroughly scrub and flush larger drains that have long-sweep sewer elbows.

• For cold-water electric pressure washers rated up to 1.8 GPM
• Rated water temperature: up to 160 Degrees F
• Sewer Jetter hose ID: 0.25 IN
• Sewer Jetter hose OD: 0.48 IN
• Nozzle OD (widest point): 0.65 IN
• Nozzle-end length (nozzle and threaded fitting): 2.48 IN
• Recommended for: 3" to 4" ID PVC (plastic) and cast iron drains
• Pressure washer adapter and nozzle are removable to expose 1/4 NPT male threads

IMPORTANT:

• NOT for use in lateral lines less than 3" ID, ceramic (clay) or Orangeburg drains; can't remove tree roots and large solid objects like rocks.
• This poly hose sewer jetter is designed for 3" to 4" ID drains that have long sweep sewer elbows; NOT recommended for use in indoor drains less than 3" ID.
• CANNOT pass through shower floor drains, sink traps, laundry drain traps, toilets, short radius elbows and fittings, and most indoor lateral lines.
• Sewer jetter rated working pressure is 4,200 PSI - but will overload (produce zero cleaning force) with all pressure washers over 1.8 GPM.
• Not compatible with any gas or hot water pressure washer, regardless of PSI rating.

• 50 FT sewer jetter has a custom NOZZLE that PULLS ITSELF deeper into slow running drains, BREAKS APART stubborn clogs, SCRUBS AWAY greasy build-up off the sides of pipes, and FLUSHES OUT dirty debris for more THOROUGH CLEANING than an electric drain snake, plumber's auger or sewer rod.
• Powered by your consumer ELECTRIC pressure washer (purchased separately) rated up to 1.8 GPM. NOT COMPATIBLE with gas pressure washers. DO NOT attempt to connect directly to a garden hose.
• Stainless steel NOZZLE has THREE larger BACK JETS to power the sewer jetter through drains, and ONE smaller FORWARD JET to help break up dense clogs. IDEAL for cleaning and flushing GREASE, SEWAGE, SANITARY PAPER, FOOD RESIDUE, SILT, CLAY, LEAVES, YARD DEBRIS, ICE, and IRON OCHRE clogs.
• Helps you unclog 3" to 4" ID MAIN DRAINS and LANDSCAPING DRAINS that have long-sweep drain elbows and fittings. NOT recommended for lateral drain lines less than 3" ID.
• Assembled COMPLETE and READY TO USE - includes 50 foot drain cleaning SEWER JETTER HOSE, stainless steel NOZZLE, standard M22 male ADAPTER for most gas pressure washers, miniature NOZZLE CLEANING TOOL, protective vinyl CAP, reusable waterproof BUNDLE TIE for easy roll-up and storage, QUICK START CARD and label instructions.

Product description

Drain Cleaning Machine 3/8 Inch x 50FT Drain Cleaner Machine with 4 Cutter and Foot Switch Electric Drain Pipe Cleaner for 1 to 4 Inch Pipes

Item Specifications

Voltage: 110V

Rated Frequency: 60HZ

Power: 250W

Horsepower : 1/3 HP

Max speed : 700 RPM

Drain Line Capacity I.D. : 1" - 4"

Features

Able to clean long sections of sewer drain

Need to manually feed the cable to drain while the drum is rotating, can drive and retract the cable easily

Capable of removing solid objects including tree roots and jewelry

Springs can easily negotiate multiple 90-degree bends while maintaining their effectiveness and without damaging the pipe

3/8" x 50 ft. wire core cable can resist breakage, tangling, and kinking

Quick-change enclosed drum and automatic feed control for your convenience

Handles pipes from 1" ID to 4" ID

Built-in GFCI (ground fault circuit interrupter)

Notice

Control the cable carefully during operation to avoid overstressing

Take protective measures when working around rotating machinery

Apply properly grounded electrical outlets

Package Contents

Electric Drain Pipe Cleaner x1

P-Trap Cutter x 1

3'' Double Cutter x 1

Spade Cutter x 1

Sawtooth Cutter x 1

Glove x 2

• Power:250 W/110 V forward/reverse motor.Horsepower : 1/3 HP.Max speed : 700 RPM
• 50' x 3/8" Cableand Universal Slotted 4 piece cutter kit.Wire core cable can resist breakage, tangling, and kinking
• The drain cleaning machine can handle pipes from 1" ID to 4" ID.Built-in GFCI (ground fault circuit interrupter). Sealed air-activated foot switch
• Need to manually feed the cable to drain while the drum is rotating, can drive and retract the cable easily
• This machine is professional tool for drain/pipe cleaning, capable of heavy duty work and is able to clean long sections of the sewer drain

User questions & answers

Question:	it says motor speed 1750 rpm but what is the speed of the snake going thru the pipes
Answer:	I'm not sure because the one I bought did not have a CONTROLLER on the drum so the snake spun madly....absolutely IMPOSSIBLE to use. I cant believe they even sell a unit without the controller. Now I know...........
Question:	does it come with a controller? someone said that purchased it and it does not come with it and you cannot control the speed
Answer:	The less expensive one DOES NOT come with a controller........useless!
Question:	Does this 1/2 inch x 50 feet unit come with the controller
Answer:	Yes
Question:	What is the "Controller" that is so important? Is it a power switch/motor speed controller? If so it looks like the cheaper model has one
Answer:	Dont buy a drain cleaner without the controller!!!!!!!! Just dont. The controller allows the operator to rotate the snake as it progresses.....helps to guide it. Think about hard difficult it would be to twist a metal cable around and around with only your hands as you push it down in a hole 25 feet away........Its IMPOSSIBLE to properly use a drain auger without a controller.....a pure waste of time and money. I'm surprised the company still sells such an inferior product. Its a heavy unit......it was a struggle to return mine......however the company was great about refunding the money. But what a chore! Just dont do it!!!!!!!

Product description

The SewerFlex 100 Ft RAM sewer jetter for gas-powered pressure washers is designed to thoroughly clean main drains, landscaping drains and septic field lines from 3" ID to 4" ID. Helps you thoroughly scrub and flush larger drains that have long-sweep sewer elbows.

• For cold-water pressure washers rated up to 4.2 GPM and up to 4,200 PSI
• Rated water temperature: up to 160 Degrees F
• Sewer Jetter hose ID: 0.25 IN
• Sewer Jetter hose OD: 0.48 IN
• Nozzle OD (widest point): 0.74 IN
• Nozzle Orifice Diameters (x4): 0.03 IN (compatible with all cold water, gas-powered pressure washers listed)
• Nozzle-end length (nozzle and threaded fitting): 2.75 IN
• Recommended for: 3" to 4" ID PVC (plastic) and cast iron drains
• Pressure washer adapter and nozzle are removable to expose 1/4 NPT male threads

Note: also cleans up to 6" ID drains if your pressure washer is rated 3.0 to 4.2 GPM



IMPORTANT:

• NOT for use in lateral lines less than 3" ID, ceramic (clay) or Orangeburg drains; can't remove tree roots and large solid objects like rocks.
• This poly hose sewer jetter is designed for 3" to 4" ID drains that have long sweep sewer elbows; NOT recommended for use in indoor drains less than 3" ID.
• CANNOT pass through shower floor drains, sink traps, laundry drain traps, toilets, short radius elbows and fittings, and most indoor lateral lines.
• Not compatible with electric and hot water pressure washers.

• 100 FT sewer jetter PULLS ITSELF deep into slow running drains, BREAKS APART stubborn clogs, SCRUBS AWAY greasy build-up off the sides of pipes, and FLUSHES OUT dirty debris for more THOROUGH CLEANING than an electric drain snake, plumber's auger or sewer rod.
• Powered by your GAS PRESSURE WASHER (purchased separately) rated up to 4,200 PSI and up to 4.2 GPM. NOT COMPATIBLE with electric pressure washers. DO NOT attempt to connect directly to a garden hose.
• Powerful RAM NOZZLE has FOUR BACK JETS (no forward jet) for MAXIMUM SRUBBING, SUPERIOR CLEANING DISTANCE and DOUBLE the PULLING FORCE of other nozzles. IDEAL for cleaning and flushing GREASE, SEWAGE, SANITARY PAPER, FOOD RESIDUE, SILT, MUD, LEAVES and YARD DEBRIS. NOT recommended for drains that are packed with hard, solid material like ice, dried clay, rocks or tree roots.
• Helps you unclog 3" to 4" ID MAIN DRAINS, LANDSCAPING DRAINS and SEPTIC LINES that have long-sweep drain elbows and fittings. NOT recommended for lateral drain lines less than 3" ID.
• Assembled COMPLETE and READY TO USE - includes 100 foot drain cleaning POLY HOSE, stainless steel NOZZLE, standard M22 male ADAPTER for most gas pressure washers, protective vinyl CAP, reusable waterproof BUNDLE TIE for easy roll-up and storage, and label INSTRUCTIONS.

User questions & answers

Question:	what is the smallest diameter pipe can this go through
Answer:	The smallest diameter sewer drain you can clean with this SewerFlex poly hose sewer jetter is 3" ID. As noted in the product details, the widest part of the sewer jetter (at the nozzle) is 0.74" diameter. However, because the nozzle end and hose fitting are 2.75" long, any elbow or transition in a line less than 3" ID will block the nozzle from passing through.
Question:	Has anyone connected a second 100ft hose? Can another hose be connected
Answer:	You should NOT connect two 100 Foot sewer jetters together to try and make a longer drain cleaner. That's because any metal coupling you'd use to connect the two hoses would be inflexible and weaker than the hoses. Should the metal coupling break or get stuck in a pipe elbow you'd have a very difficult job trying to extract the drain cleaner. Note that it's unlikely that any pressure washer you can buy will provide enough hydraulic horsepower to power a 200 foot jetter close to its full length. Instead, consider hiring a plumbing contractor with a large, trailer mounted sewer jetter that's long enough and has enough horsepower to complete the job.
Question:	Does this hose work with a electric washer
Answer:	NO, this SewerFlex sewer jetter is NOT COMPATIBLE with electric pressure washers. That's because 1) this sewer jetter has a nozzle that's designed only for GAS pressure washers, and electric machines can't deliver enough GPM flow at their rated pressures to power the drain cleaner more than around 30 FT (that is, less than one-third of its length) in most drains, and 2) most electric pressure washers have spray guns that don't fit the M22 Male threaded inlet adapter on the sewer jetter. There is a SewerFlex 50 FT Premium Drain Cleaner with a higher-force RAM nozzle that's compatible with electric machines that have METAL spray lances, and also with gas machines rated up to 2.8 GPM: https://www.amazon.com/dp/B07TYYD3X1
Question:	If i want to change the sewer jetter "tip" to a rotating one - what size do i order
Answer:	The nozzle-end fitting on this 100 Ft black (poly hose) SewerFlex sewer jetter has a 1/4" NPT male threaded connection that fits any nozzle with a 1/4" NPT female inlet. However, we'd expect an aftermarket rotating nozzle to be LESS effective than the original RAM nozzle that came installed on this drain cleaner, because rotating nozzles are longer, heavier, and provide less pulling force. You should ask the aftermarket nozzle supplier to recommend their best nozzle orifice size to match the GPM and PSI rating of your pressure washer.

Product description

The SewerFlex™ sewer jetter for gas-powered pressure washers is designed to thoroughly clean main drains, landscaping drains and septic field lines from 3" ID to 4" ID. Helps you thoroughly scrub and flush larger drains that have long-sweep sewer elbows.



IMPORTANT INFORMATION:

• For your cold-water, GAS PRESSURE WASHER (sold separately) rated up to 4.2 GPM and up to 4,200 PSI. DO NOT attempt to connect to an electric pressure washer or directly to a garden hose.
• COMPARE and MATCH the TWIST FITTING on your TRIGGER GUN with the trigger gun image at the top of this page before ordering.
• This poly hose sewer jetter is designed for 3" to 4" ID drains that have long sweep sewer elbows; NOT recommended for use in drains less than 3" ID.
• To avoid clogging the sewer jetter nozzle with debris from open hoses, always FLUSH ALL SUPPLY HOSES and YOUR TRIGGER GUN with CLEAN WATER for 30 SECONDS before attaching the sewer jetter.
• DO NOT USE in clay (ceramic) pipes, Orangeburg (tar composite) pipes, drains that could have tree roots, rocks, or pipes with preexisting structural damage. CANNOT pass through shower floor drains, sink traps, laundry drain traps, toilets, short radius elbows and fittings, and most indoor lateral lines.
• If you disassemble the nozzle to clean it, use a soft cloth to clean the exposed male hose fitting threads, sparingly apply removable THREAD SEALANT (sold separately) to the 2nd-4th rows of male threads, re-install the nozzle, and allow to set overnight before pressurizing.

Note: also cleans up to 6" ID drains if your pressure washer is rated 3.0 to 4.2 GPM.

• 50 FT sewer jetter PULLS ITSELF deep into slow running drains, BREAKS APART stubborn clogs, SCRUBS AWAY greasy build-up off the sides of pipes, and FLUSHES OUT dirty debris. Powered by your GAS pressure washer (purchased separately) rated up to 4,200 PSI and up to 4.2 GPM.
• Helps you unclog 3" to 4" ID MAIN DRAINS, LANDSCAPING DRAINS and SEPTIC LINES that have long-sweep drain elbows and fittings.
• Powerful NOZZLE has THREE BACK JETS to power the sewer jetter through drains, and ONE FORWARD JET to help break up dense clogs. IDEAL for cleaning and flushing GREASE, SEWAGE, SANITARY PAPER, FOOD RESIDUE, SILT, CLAY, LEAVES, YARD DEBRIS, ICE, and IRON OCHRE clogs.
• Assembled COMPLETE and READY TO USE - includes 50 foot drain cleaning POLY HOSE, stainless steel NOZZLE, standard M22 male ADAPTER for most gas pressure washers, protective vinyl CAP, reusable waterproof BUNDLE TIE for easy roll-up and storage, and label INSTRUCTIONS.
• BEFORE ORDERING read and follow all IMPORTANT INFORMATION in the Description section. NOT COMPATIBLE with electric pressure washers.

User questions & answers

Question:	Will this clean out an 1 1/2 abs drain? is it flexible enough to pass through a 1 1/2 abs san-t - long sweep
Answer:	NO, this drain cleaner is NOT designed to clean 1-1/2" ID ABS drains. As noted on this product page: This poly hose sewer jetter is designed for 3" to 4" ID drains that have long sweep sewer elbows; NOT recommended for use in drains less than 3" ID. The main factor that limits its ability to pass through smaller ID elbows is NOT the flexibility of the hose, but the length of the nozzle tip. This poly hose sewer jetter has a nozzle tip (including the steel fitting and nozzle) that's nearly 3" long. For better odds of passing through smaller drain elbows down to 1-1/2" ID, consider the steel belted JetSnake sewer jetter (https://www.amazon.com/dp/B077STYDB9) that has the strength to retain a much shorter nozzle tip. The JetSnake sewer jetter is designed to clean most drains down to 1-1/2" ID.
Question:	I have an older northern hydraulics pressure washer with a quick connect on the wand, is there a connector I can use to hook up to the quick connect
Answer:	Many older and custom-style trigger guns have thread-on spray lances with 1/4" NPT threaded connections. You can usually remove the metal spray lance to expose a 1/4" NPT Female discharge fitting on the trigger gun body. You'd then remove the brass fitting that came installed on the SewerFlex sewer jetter to expose a 1/4" NPT Male steel fitting, and attach the sewer jetter directly to the trigger gun using two adjustable wrenches and some Teflon tape. Note that the 1/4" NPT fitting size refers to the fluid bore diameter inside the Male fitting, and not to the larger outside diameter of the threads.
Question:	my toilet won"t flush and shower and sink back up plus my toilet bubbles once in a while. will this help
Answer:	This 50 Ft SewerFlex Poly Hose sewer jetter is designed to clean 3-4" ID main drains and landscaping drains. If the clogged fixtures in your home are only in a single area (like a bathroom or kitchen line) then the clog is likely to be in a smaller ID lateral line. You've got much better odds of success cleaning a smaller lateral line using a different, Premium sewer jetter with a smaller tip, and inserting that premium sewer jetter into a clogged drain opening such as a tile shower floor drain that's exposed when you remove the cover, or the opening under a clogged bathroom sink that's exposed when you remove the P-trap. Premium sewer jetters with smaller tips that can go through these lateral lines down to 1-1/2" ID include: SewerFlex 100 FT Premium Drain Cleaner: https://www.amazon.com/dp/B07N134M3G JetSnake 50 FT Sewer Jetter: https://www.amazon.com/dp/B077STYDB9 Before you consider buying a sewer jetter, you can try a low-cost 25 Ft drum auger to see if that solves the problem: https://www.amazon.com/Cobra-86250-Deluxe-Drum-Auger/dp/B006LWC6QM
Question:	Could i connect this to an eletric pressure washer
Answer:	DO NOT attempt to connect this drain cleaner to an electric pressure washer. You'd be wasting your money. Regardless of their advertised ratings, electric machines costing less than ~ $600 don't produce nearly enough GPM flow to power this drain cleaner, and usually don't have compatible trigger gun fittings.

• Breaks down waste fast to unblock and clear all household sinks and drains
• Natural, safe for all septic and environmental systems, non-toxic and chemical free
• Over 60 strains that actually eat and digest waste
• Effective and easy to use, convenient water-soluble sachets

Product description

Features:

Strong impact, create a stronger cleaning ability

Button nose sewer jetter nozzle，stable water output, strong cleaning

Rotating nose sewer jetter nose，360° cleanning

Suitable for car washing, dredging sewers, pipe cleaning



Applications:

1.Button nose sewer jetter nozzle: 1 front jet at 0° spray angle can clear blockages. 3 rear jets at 33° spray angle can flush out debris loosened by the front jet.

2.Rotating sewer jet nozzle: 3 backward rotating spray blasts into clogged pipe and moves the nozzle through pipe.

3.The nozzle is easy to slide into drain pipes and sewer lines. It offers an even cleaning and flushes out debris.



Specifications:

Inner Tube: Thermoplastic polyester tube

Reinforcement: One layer 1/4" high tenacity polyester textile braid that is chemically bonded

Cover: Black thermoplastic

Temperature Range: -40°F / +160°F



Package Includes：

Sewer jet hose * 1（50FT/ 100FT）

Rotating sewer jet nozzle * 1

Button nose sewer jetter nozzle *1

Coupler (female M22 to female 1/4" NPT) * 1

1/4" quick disconnect plug * 1

• 【PROFESSIONAL CLEANING KIT】- The sewer spray kit includes a 50FT/ 100FT sewer spray hose, button type sewer spray nozzle, rotating sewer spray nozzle, corner sewer nozzle, M22-14F connector, 1/4 inch quick connector plug and waterproof tape.
• 【DURABLE SEWER SPRAY HOSE】- The sewer spray hose has an inner tube, reinforcement and cover. The inner tube is made of thermoplastic polyester. The reinforcement layer is a chemically bonded 1/4 inch high strength polyester textile braid. The cover layer is made of thermoplastic polyurethane, which can resist the effects of weather, oil, abrasion and ozone.
• 【EASY TO MATCH】- The sewer parts of the high-pressure cleaner can help you to dredge more types of indoor and outdoor drainage equipment. It can be used in combination with any brand of high-pressure cleaner to easily wash obstacles. The working pressure is rated at 5800 PSI. The burst pressure is rated at 11000 PSI.
• 【ROTARY SEWER NOZZLE】- 3 reverse-rotating sprays spray into the blocked pipe and make the nozzle pass through the pipe. At the same time, it provides an even cleaning and rinsing of debris. It is easy to slide into sewers and drains. When connected to a sewer spray hose, it is used to flush debris or clean fixed pipes. Orifice 4.5.
• 【CORNER SEWER NOZZLE】- 1 water spray is used to remove the corner jam laterally. The three rear nozzles at 33 ° wash away debris loosened by the front nozzle. Orifice 4.0. Side holes at corners where hose cannot pass. Ideal for cleaning around the corner.