13 best new pressure washers

Product description

In some instances, the pump may need to be removed to change engine oil. 

Some specific pressure washers may require longer bolts and spacers to mount the pump to your engine. 

These bolts and spacers are not included, but may be purchased at your local hardware store.  

Common bolt sizes: Two - 5/16" 18 x 2 1/2" , One - 5/16" 18 x 3 1/2"

 

PARTS COMPATIBILITY:

Specific models stated in the listing are potential matches only and NOT a guarantee of compatibility.

(Even if two pieces of equipment share the same year/make/model, they can and often do have different part numbers).

The only way to ensure the correct replacement is with the OEM part number. The customer is responsible for verifying their OEM part number.

It is the customers responsibility to make sure that this is the correct item/part for their unit. If you are unsure if this is the correct item/part, please contact The ROP Shop, we would be more than happy to help you.

• New 2800 psi PRESSURE WASHER WATER PUMP
• Fits 2800 psi
• 2500-2800 PSI / 2.3 GPM
• Fits 7/8" Shaft Vertical Crank Engines
• 22 MM x 14 MM Hose Connection

User questions & answers

Question:	Will this pump replace pump A07908 off a vr
Answer:	Maybe
Question:	Is there an user manual
Answer:	No, but installation is relatively intuitive.
Question:	Will this fit my honda blackmax power washer 2800psi
Answer:	it should its pretty much a universal pump the bolt pattern is correct its for a 7/8 crank which is correct this pump is clocked where the hoses come out the back if they need to come out the front we will need to rotate the pump for you before shipment most of the time people would rather have it come out the back anyways
Question:	I have a husky with a pump part number 308653006. Is this a direct replacement for that
Answer:	Hello! Thanks for the inquiry. Yes, this is a replacement for that part number. It's an aftermarket version so keep in mind that it won't look exactly the same, but it will work for you. Also, note that spacers / longer bolts may be required to mount the pump to the engine, depending on the configuration.LeahCustomer Service

Product description

Power. Performance. Versatility. The Pressure Joe SPX3000 electric pressure washer delivers it all to tackle a variety of cleaning tasks: homes, buildings, RV’s, cars, trucks, boats, decks, driveways, patios, lawn equipment and more. Packed with an 1800-Watt/14.5-amp motor, the Pressure Joe SPX 3000 generates up to 2030 PSI of water pressure and 1.76 GPM of water flow for maximum cleaning power. Remove tar and grease from concrete, heavy mildew stains, oil stains, rust from steel, caked mud on equipment, and other stubborn gunk and grime. Equipped with a dual detergent tank system the Pressure Joe SPX3000 carries and stores two different types of detergent simultaneously in its two .9L onboard removable detergent tanks. Conveniently switch between different detergents with its detergent selection dial and blast away all sorts of grime. Its 34-inch extension spray wand and rear wheels provide easy maneuverability and access to hard-to-reach areas such as 2 story buildings and the undersides of the automotive vehicles and lawn equipment. Tailor the pressure output of the spray to your cleaning needs with Pressure Joe's five quick spray nozzles. Other features include: 20 foot high pressure hose, 35 foot power cord, garden hose adaptor, and a TSS (Total Stop System) trigger that automatically shuts off the pump when the trigger is not engaged. Voltage 120 V ~ 60 Hz

• Power Source Type: Corded-Electric

User questions & answers

Question:	Can a professional foam lance be attached to this
Answer:	Yes! The Professional Foam Lance (MTM Hydro) comes with both 1/4'' quick connect and M22 fittings. You can either attach the Lance to the end of the extension bar with the 1/4" quick connect, or at the end of the gun with the M22 fitting.
Question:	Is the pressure sufficient for (1) cleaning vinyl siding and (2) cleaning mildew off a large wooden deck
Answer:	1. yes, but only for about 1 story without ladder. you need to be 4-5ft away2. yes, worked great on reclaimed hardwood to remove grime and mildew. You need to go very slowly with a narrow angle nozzle 3-4inches from the surface. The cleaned strip is narrow so it takes a while to do a large area. That being said, you'll get the job done and I am not sure any pressure washer will make a job like that really quick, just much easier than hand scrubbing.
Question:	Sun Joe SPX3000 pressure washer: I read that you need soap designed to run through the pump. Have you found a brand of soap that is OK for this
Answer:	According to company website: "Your Sun Joe Pressure Joe SPX3000 has a downstream chemical injector, installed on the outlet (discharge) side of the pump, that applies detergent with the dedicated soap nozzle. The advantage of the downstream injector is that the chemicals cannot cause damage to the pump system. In upstream injectors, the chemicals run through the pump, causing the pump seals to wear out."So if you use soap, it doesn't run through the pump. I would still be careful what you use and maybe dilute it to help prevent damage.
Question:	What makes this one so much better than the AR Blue Clean that's $45 cheaper? (Besides psi
Answer:	The Sun Joe has brass fittings on the water connectors which makes it more substantial and less likely to leakethan plastic fittings. Does the AR Blue Clean have brass fittings now?

Product features

You Name It, You Aim It, Grime Is Gone

THIS ELECTRIC PRESSURE WASHER GETS YOUR DIRTY WORK DONE. The Sun Joe SPX3000 pressure washer delivers it all to tackle a variety of cleaning tasks: homes, buildings, RV’s, cars, trucks, boats, decks, driveways, patios, lawn equipment, and more.

OUR BEST-SELLING PRESSURE WASHER, THE SPX3000 COMBINES POWER, PERFORMANCE, AND VERSATILITY. The Sun Joe SPX3000 electric pressure washer generates up to 2030 PSI of water pressure and 1.76 GPM of water flow for maximum cleaning power.

Dual Detergent Tanks

Two 0.9 liter onboard, removable tanks carry and store different types of detergent to simultaneously tackle different cleaning projects.

Safety Lock Switch

TSS (Total Stop System) trigger – automatically shuts off the pump when trigger is not engaged to save energy and prolong pump life.

Accessories

Includes two 30.4 ounces (0.9 liter) removable detergent tanks, 34 inch extension wand, 20 foot high pressure hose, 35 foot power cord with GFCI protection, garden hose adapter, needle clean-out tool, 5 quick connect spray tips.

SPX-25H

25 Foot Universal Pressure Washer Extension Hose for SPX Series and Others.

SPX-PCA10

10-Inch Surface, Deck, Patio Cleaning Attachment for SPX Series Pressure Washers.

SPX-RB1

Rotary Wash Brush Kit For SPX Series Pressure Washers.

SPX-TSN-34S

Quick-Connect Turbo Head Spray Nozzle.

• ⭐【Universal NEW Horizontal Power Washer Pump】The fully anodized treatment for rust prevention, imprvoed wear resistance and hardness of Presssure Washer Pump. MAX 3200 PSI / 2.5 GPM, top performance at 3000-3200 PSI and fit most 212 ~ 220cc. ※NOTE: This pump only fit HORIZONTAL 3/4'' SHAFT Small Gas Engine.
• ⭐【High Quality】This Univeral Replacement Pump based on OEM, direct drive Horizontal axial pump fits most 3/4" shaft power washer Horizontal engine at 6.5 ~ 7hp (212 ~ 220cc). Provide with highly stable and powerful performance and renew your power washer, and upgarde 50%, Max 200 hrs running time, than normal for years washing job.
• ⭐【Easy Start】 Built in for simple & quick cold starts to make the startup a breeze, no need to release pressure before starting engine.
• ⭐【Mounting & Dimension】Equipped with industry standard 3/4" shaft, comes with generic 22mm x 14mm hose connections, also provide with flange bolts, soap hose and keys. ►Hole Distance to the hole is 2 5/8", ►Outer Holes is 1 7/8", 2 5/8". ※PLEASE NOTE: Only fit 3/4" shaft Horizontal pressure washer pumps.
• ⭐【COMPATIBILITY 】►Troy-Bilt: 20241, 020241-1, 20242, 020242-0 -1, 020242-02, 020242-04. ►Karcher: G3050OH, MH5500H-1, M5500H-2, M5500H-3, G2800OH, G3000OH, G3025OH, G3050OH. ►Generac: 01675-0, 01675, AXD2524GT-22mm, AXD3025G. ►PowerStroke: UT80522, UT80953, 308418007. ►Simpson: MSH3125, MSH3125-S. ►Honda: GC190, GC135, GX140, GC160. ►Delta: DXPW3025, DH3028. ►RIDGID: RD80947, RD80746. ►Steele: SP-WG240, SP-WG300.

User questions & answers

Question:	Will this fit a powerhorse
Answer:	You have to measure the bolt pattern and shaft size on the karcher engine to make sure
Question:	Will this pump fit on a honda GC190 engine
Answer:	You don't need to change the oil, it can support hole lifetime.
Question:	Will it fit a Karcher 2650hh
Answer:	This is a fully stainless steel pressure gauge, which is built with stainless steel sensor. It is suitable for refrigeration service. This is a very multifunational gauge, we trust you would love it.
Question:	can oil ever be replaced
Answer:	No, but I am not the seller. I just bought it as a customer.

Product features

YAMATIC NEW 3/4" Shaft Horizontal Pressure Washer Pump

Direct drive horizontal axial pump fits horizontal 3/4" shaft power washer, and fit many horizontal engines at 6.5 ~ 7hp (212 ~ 220cc).

NOTE: As this pump won't necessarily fit every model, Please do check the Installation dimensions or confirm with us.

YAMATIC Anodic Oxidation Surface Treatment

• Troy-Bilt: 20241, 020241-1, 20242, 020242-0 -1, 020242-02, 020242-04
• Karcher: G3050OH, MH5500H-1, M5500H-2, M5500H-3, G2800OH, G3000OH, G3025OH, G3050OH
• Generac: 01675-0, 01675, AXD2524GT-22mm, AXD3025G
• PowerStroke: UT80522, UT80953, 308418007
• Simpson: MSH3125, MSH3125-S
• Delta: DXPW3025, DH3028
• RIDGID: RD80947, RD80746
• Honda: GC190, GC135, GX140, GC160 (NOT compatible with honda old machine.)
• Steele: SP-WG240, SP-WG300
• Campbell Hausfeld: PW261810LE

and many other 3/4" Horizontal Shaft Engine.

NOTE:

1. NOT FIT EXCLL PRESSURE WASHER AND 7/8" SHAFT ENGINE.

2. As this pump won't necessarily fit every model, Please do check the Installation dimensions or confirm with us.

Features

• ✔Easy Start - Built-in for simple & quick cold starts to make the startup a breeze.
• ✔Max 200 hours Running Time - 80 hours longer service life than other pumps!
• ✔OEM Pump - For horizontal engine at 6.5 ~ 7hp (212 ~ 220cc) . It could work at a wide range from 3000 to 3200 PSI, 2.5 GPM.
• Fits 3/4" Shaft Horizontal pressure washer pumps: Hole Distance to the hole is 2 5/8", Outer Holes is 1 7/8", 2 5/8".

Package Includes:

• 1 x Pump
• 1 x Chemical injector hose
• 4 x Flange bolts
• 2 x Keys
• 1 x User manual

Product description

At TOOLZIN, we know that time is precious. Why scrub when you can eliminate tough grime with better results in less time? We know our customers appreciate value too! Why replace your pressure washer when you only need to replace the wand and gun. Our Universal Replacement Pressure Washer Gun and Wand Attachment is the perfect solution!





It is our mission to offer innovative pressure washer products that offer our customers great value.



Included:



1- Pressure washer spray gun with squeeze trigger control

1- Lance wand attachment

1- M22 Brass Coupler

5- Color Coded Power Spray Nozzles





Benefits:



✔ The ULTIMATE Father’s Day gift.

✔ Saves time and your energy!

✔ Stunning results!

✔ 3 lengths to tackle all your dirty jobs.

✔ Cleans porch, deck, patio, siding, trucks, trailers, mowers, tools, concrete, driveways, brick walls and more





Product Specifications:



NOTE: Not for direct attachment to hose. To be used as an attachment to a pressure washer.



1. 3 Lengths help you tackle any grimy job

✔ 9in, 24in, and 40in.

2. Universal Brass M22 fitting is compatible with:

✔ The M22 14 mm fitting for Generac, Simpson, Briggs Stratton, Craftsman, Karcher, Ryob

✔ The M22 15mm fitting for Sun Joe, Campbell, MI-T-N, AR Blue, Stanley, Cleanforce, Simoniz, Excell

3. 1/4’’ standard quick connector connects any accessories with 1/4’’ plug to the gun.

4. Spray nozzles are angled to meet all of your cleaning needs (0, 15, 25, 40, 65 degree).

5. Max pressure is up to 5000 PSI.

6. Max flow rate is 8 GPM.

7. Max Temperature of water is rated to 60℃ / 140 F





Warning:Do not point the pressurized spray at people or animals. Do not point directly at your face. Pressurized or soapy water may cause injury to eyes.





BUY NOW to make cleaning a breeze!





🕑 🕗 Stock is EXTREMELY LIMITED so hurry up and click the

• ✅ EASY TO USE WITH COMFORT-GRIP: Best universal replacement pressure washer wand and spray gun available; Deep cleans patios, driveways, decks, siding, car, mowers, and tools; Adjustable pressure washer attachment accommodates hard to reach places
• ✅ 1 YEAR WARRANTY GUARANTEE: At TOOLZIN, we pledge to back the quality of our products with our MANUFACTURER’s WARRANTY; If ever, you are not satisfied with your purchase, CONTACT US for exchange or full refund
• ✅ MULTI-BRAND COMPATIBLE: Our sprayer with M22 fitting is compatible with the M22 14 mm fitting for Generac, Simpson, Briggs Stratton, Craftsman, Karcher, Ryobi and the M22 15mm fitting for Sun Joe, Campbell, MI-T-N, AR Blue, Stanley, Cleanforce, Simoniz, Excell
• ✅ SAVE TIME AND MONEY: Tackle tough cleaning tasks effectively without replacing your entire pressure washer; Our multi-length high-pressure power washer tool fits many brands to save our customers time, money and spare you the frustration
• ✅ ELIMINATE THE GUESSWORK: 5 color-coded high-pressure nozzles perform specific spray functions with our pressure wand, so you get the best results and the right tool for the right job; Up to 5000 PSI for labor-saving results without a scrub brush

User questions & answers

Question:	Does this part fit Ryobi RY14122 pressure washer
Answer:	Dont. Uy the pressure washer. Nothing fits it. It’s. Rip-off
Question:	will this wand fit a greenworks electric power washer does it have a quick connect fitting to use the round concrete scrubber
Answer:	Yes it will fit green works electric power washer. Yes it includes a standard 1/4 quick connect fitting.
Question:	where is this product made
Answer:	This is a high quality product from a small family business based in the USA. The product is made in China. We strive to make the best quality and provide great customer service.
Question:	Can these be hooked up to a stardard garden hose
Answer:	It is not designed to hook up to a garden hose. It needs to be hooked up to a pressure washer to get the cleaning power you desire. Thank you for asking.

Product description

Note: Please review all product information to ensure that this product is compatible with your unit. A Message to the Customer: We constantly strive to provide clear and concise product information. We understand that sometimes it can be difficult to confirm product compatibility. It is your responsibility to confirm this is the correct product you need; therefore, we encourage all customers to fully review the information provided in this listing prior to purchase. Nothing is worse than having to return a product, trust us…we get it. Let’s work together to avoid this! If you are unsure as to whether or not this is the correct product for your unit, please ask. If you seek assistance we will need as much of the following information as possible, if applicable, to help you find the product you are looking for: Model, Spec and/or Type Number, Code and/or Serial Number, or Year

• 2600 psi PRESSURE WASHER WATER PUMP
• For Honda & Excell XR2500, XR2600, XC2600, EXHA2425, XR2625
• 2400-2600 PSI / 2.3-2.4 GPM
• Garden hose hookup / 22mm Outlet
• Fits 7/8" Short Shaft Engines 1-1/2" or less

User questions & answers

Question:	Will this fit an excell xr2600 with an a14527 pump on an Honda motor
Answer:	Yes this pump only replaces the odd strap/bow tie pump on the xr2500 xr2625 xr2600 exha2425, 7/8" shaft model, thanks tony 727-858-1721
Question:	will this fit the
Answer:	It fit the 2400 perfectly. I don't know if it will fit the 2425.
Question:	Is fit excell xr2526 2.5 gpm honda 5.0 hp - gc
Answer:	If you meant the model to be "XR2625," then yes this is the correct replacement pump.ShaunaCustomer Service
Question:	will it fit karcher g2500vh
Answer:	Is pump

Product description

PARTS COMPATIBILITY:

Specific models stated in the listing are potential matches only and NOT a guarantee of compatibility.

(Even if two pieces of equipment share the same year/make/model, they can and often do have different part numbers).

The only way to ensure the correct replacement is with the OEM part number. The customer is responsible for verifying their OEM part number.

It is the customers responsibility to make sure that this is the correct item/part for their unit. If you are unsure if this is the correct item/part, please contact The ROP Shop, we would be more than happy to help you.

• 3 Pack New AR PRESSURE WASHER PUMP HEAD BUSHINGS
• For Annovi Reverberi RMW Pressure Washer Pump
• AR Part Number: AR2840561
• Fast & Free Shipping from The ROP Shop
• Quality OEM Part with 1 Year Warranty

User questions & answers

Question:	does these fit a craftsman pressure washer model
Answer:	? I just put in my kind and model number and it gave me the one I needed
Question:	Will this bushing fit a briggs and stratton model 020426 power washer? i do not have the oem part number
Answer:	?? Have you try putting in you kind and model that how I did it and it work great for me good luck
Question:	Will these parts fit my briggs and stratton pressure washer model 121P02-0001-F
Answer:	These bushings fit the Annovi Reverberi RMW water pump. You'll have to get the model number on the water pump itself to be absolutley sure. The water pump and engine are two separate items.
Question:	Will these go on rmw22g
Answer:	Honestly can’t answer that question but you can cross reference the numbers and see. To your machine. Good luck it works great for me.

• QUALITY THAT LASTS - 2800-3000 PSI and 2.5 GPM which is great for any and all small house cleaning projects. Very safe pressure even for washing your car or other things without being afraid to damage the paint!
• EASY START - Horizontal Pump Fits Most 3/4" Shaft Power Washer Horizontal Engines (Best results 196cc - 212cc) With Our Pump You Can Get More Out Of Your Pressure Washer!
• BETTER THAN OEM - Fits 3/4" Shaft Horizontal Pumps - High Quality Replacement Pump For Your Pump. These Are OEM Replacement Pumps For Many Models of Pressure Washers. If Your Old One Stopped Working, Is Corroded etc. Don’t Hesitate!
• DOES IT MATCH YOUR MACHINE? - Our Pump Comes Standard With A 3/4 Inch Shaft Which Is Most Common For Small Horizontal Pressure Washers. (5 HP to 8 HP) - Shaft Depth: 2 5/8" - Hole Distance to hole - 2 5/8" Keyway Size: 3/16" - DOES NOT FIT 7/8" Vertical/Bottom Shaft Pumps.
• PARTS COMPATIBILITY - Homelite: 308418007, 309515003, 308418004, 308653078, 308653093, 308653057, UT80522B, UT80953B, UT80522A, UT80953A. ✔ Karcher: G3050OH, K2400HH, G2400HH. PowerStroke: PS80522, PS80903B, PS80903A. ✔ Generac: 308418007, 01675, 01675-0. ✔ Troy-Bilt: 020242-02, 020242-04, 020241, 020241-1, 20242. ✔ Simpson: MSH3125, MSH3125-S. ✔Honda: GC190, GC135, GX140, (GC160w/ 3/4 Inch Shaft) - Message Us To See If Yours Fits!

User questions & answers

Question:	Will this pump match up to the Craftsman
Answer:	Yes but verify the shaft is 3/4 inch diameter and has a 3/16 slott for lock key and the 4 x 2 1/2 inch on center mounting holes pattern for your motor.
Question:	Will this pump fits honda gc
Answer:	Yes! As long as your Honda G160 has the standard 3/4" shaft and 4 mounting bolts (in a square).
Question:	When will my order arrive? I ordered it almost 3 weeks ago and it still hasn’t arrived? Please advise
Answer:	its lost in transit or out of stock .....get a refund or claim or another replacement
Question:	if this does not fit my craftsman model580.767303 PW can i send it back? my engine shaft is 3/4" with a 3/16 groove for keyway and hole patter
Answer:	First yes you can send it back IF ---, not this is the right thing 100% YES IF you use the Amazon program. Amazon is the very best for customer service. Second - it will fit. There may be a slight difference in the distance from the pump to your engine -- but if it fails to fit and the shaft is too long - judge the distance and put the appropriately sized washers on it. If all else fails you have up to 30 days to return it. I pay a little extra for Amazon because even if the seller takes off - Amazon makes it right - every time now for years

Product features

Horizontal Engines with 3/4" Shafts ONLY

1. FITMENT - This pump comes with a standard 3/4” shaft which is most common for all small Horizontal pressure washers.
2. Shaft Depth: 2 5/8"
3. Hole Distance to hole - 2 9/16”
4. Keyway Size: 3/16"

PEGGAS Pump Measurements

• Height: 7 1/2" (Inches) tall
• Width: 5 5/16" (Inches) wide

PEGGAS Pump Measurements

• Length: 8" (Inches) Length

PEGGAS PW28/2.5 Technical Specifications Sheet!

Fits many models:

• Homelite 308653057, 308418007, UT80522, UT80953, UT80522B, UT80953B, UT80522A, UT80953A, UT80522D, UT80522E, HL252300 - Powerstroke 30841800, PS80522, PS80903A, PS80903B - Delta DXPW3025 - Karcher MH5500H-1 M5500H-2 M5500H-3 , Karcher G3050OH - Generac 308418007 HL252300, Generac 01675, 01675-0, 1675, 1675-0, G24H - Troy-Bilt 020241, 020242, 020241-0 - Comet BXD2528, BXD2527G - Craftsman 580.752600 580.752601 - Generac AXD2524GT-22MM, AXD3025G - Simpson MSH3125, MSH3125-S - Annovi Reverberri SJV25G27D-F7-EZ, AR MV25G30D - OEM Technologies FNA520002 (SIMPSON 520002) - AR North America RMV25G30D-PKG, RMV25G30-EZ-PKG
• Engines: OEM Himore 309515003 Engines, Honda GC160 Type P, Honda GC190
• AND many other models.

(Does Not Fit Excell engine's w/ 7/8" shaft )

1. THIS PUMP IS EXCLUSIVELY FOR HORIZONTAL ENGINES WITH A 3/4" SHAFT
2. Shaft Diameter: 3/4" Keyed Hollow Shaft

• THIS PUMP WILL ONLY FIT A HORIZONTAL ENGINE w/ 3/4 Shafts, NOT A 7/8 SHAFT & NOT VERTICAL ENGINES. Models stated in the listing are potential matches only and NOT a 100% confirmation of compatibility. The customer is responsible for verifying their compatibility (our pump with their machines)*** Fits Honda Excell units with 3/4 shaft only!!! Some Excell units have the 7/8 shaft and this pump will not work!**

Learn More About The PEGGAS Horizontal Pump With Our Diagram!

• FITMENT - This pump comes with a standard 3/4” shaft which is most common for all small Horizontal pressure washers.
• Discharge Ports : 22mm Twist Connect (High-Pressure Hose)
• Inlet Ports (Garden Hose): 3/4" Garden Hose Thread
• Comes with Built-In Unloader
• Built-In Chemical Injector
• Comes with a FREE Thermal Relief Valve

3/4 Inch Horizontal Shaft!

• PUMP SPECIFICATIONS:
• Type: Axial
• Head Material: Aluminum
• Engine HP required: 5.5 HP (Minimum)
• Max. Water Supply Temperature: 104°F
• Self-suction: Yes
• Pre-Oiled Ready to go!

3/4" Inch Horizontal Shaft Pump Mounted!

• When installing, please ensure that the keyway is installed before running your pressure washer.
• Allow water to flow freely through the pump until all air is out of the lines before firing the pressure washer up!

3/4 Inch Horizontal shaft pump in ACTION!

1. Max. Volume: 2.5 GPM Max.
2. Pressure Output : 3000 PSI Max.
3. Pump Speed: 3450 RPM

• Allows for a large area of coverage and with all that cleaning power, Blast away all Dirt, Grime, away forever!

PEGGAS

• 💦【Upgrade Pressure Washer Hose】50 ft X 1/4 inch, MAX 3200 PSI. Compatible for most brand power washer Craftsman, Honda, B&S, Generac, Ryobi, Powerstroke, Simpson, Dewalt. PLEASE NOTE: Need extra fittings for Sun Joe, and AR blue electric pressure washer.
• 💦【Top Performance】Industry benchmark with performance Max 3200 PSI / Burst 8700PSI, desgined for high performance gas power washer up to 3200PSI equipped with 4hp to 8hp gas engine. Also perfect and durable for 14mm electric pressure washers.
• 💦【Great Durability】With innovation high technology material and process management, new upgraded strength and wear resistance, this is perfect replacement and extension pressure washer hose will provide a longer lifetime and safe using for your home clean and commercial use.
• 💦【Kink Resistant】Premium high quality material hose merge with unique high-tech manufacturing process, to provide you with EASY carry, drag and roll up. Non marking and great kink resistance. TIPS: Please lay flat to full length when using it for the first time, then you will move it and store it easily.
• 💦【Health & Warranty】Hose Comply with environmentally-friendly RoHS standard and using recycled material, to protect your health and our earth clean.

User questions & answers

Question:	will this fit a ryubi 2000pis electric pressure washer
Answer:	No, you provide the mounting stump. I was fortunate to have a large tree that had been felled so I was able to get it easily. However, if you don't have access to one this product would not be for you. You have to have the base. Having said that, once installed, it works great for my needs for occasional chunks of wood for smoking meat. I would expect it to work well with kindling too. Larger pieces, not so much.
Question:	can this hose replace the one that comes with the Karcher 1900 or 2000? Would it fit on the reel of the K
Answer:	METAL SUPERMARKET, MEASURE DIAMETER AND LENGTH AND ORDER A STEEL ROD. YOU MAY HAVE TO THREAD THE END; OR FIND A PIECE OF ALLTHREAD PROPER LENGTH.
Question:	Will this fit a power stroke 3100 PSI
Answer:	China
Question:	Will this hose work with power stroke pressure washers? i am concerned about the hose connector specifically which is m22-14mm
Answer:	Once it showed up finally it is a wonderful product to have. We tried using axes, hammering wedges in, even chainsaws and other various power & nonpower tools and it got us absolutely nowhere. With the log splitter it's actually very easy to split large logs. Definitely worth the investment. We have chopped through 2foot long and 2 feet in diameter tree trunks with ease with this log splitter.

Product features

YAMATIC Kink Resistant Pressure Washer Hose

Designed for pressure washers up to 3200 PSI with American Standard M22-14mm ends, Kink Resistant, Compatible for most pressure washer especially high-performance brands such as Honda, Excell, B&S, Craftsman, Generac, Champion, Simpson, Ryobi, Greenworks, Powerstroke, PowRyte, Westinghouse, Wen, etc.

PLEASE NOTE: Need adapters for Sun Joe, AR Blue, etc electric pressure washers, or there will leak.

RoHS Standard Hose

We are committed to the sustainable development of the earth, and care about the health of customers. This product is made from high quliaty material and comply with RoHS standards.

Heavy Duty Ends

> Heavy-duty SOLID BRASS and 100% pure ABS mat, more durable and easy to load/unload；

> Version 2.0 enhances cover to protect from broken.

Smooth Water Flow Under Small Bend Radius

Hose still performance smooth water flow without block or kink Even under 3/4" small bend radius.

Heavy Duty Bend Restrictors

Heavy-duty bend restrictors on both ends, Ensure the pressure capability of the pipe connection front end.

KINK RESISTANT POWER WASHER HOSE

• Kink resistant premium PVC hose provides high rust resistance.
• Textile braided reinforcement and seamless inner tube make sure smooth water flow.
• M22-14mm America standard threads.

PLEASE NOTE:

1. Need an adapter for Sun Joe, AR Blue, etc electric pressure washers, or there will leak.

2. Keep the hose away from the engine muffler.

3. Please lay flat the hose to full length before using, then the hose will be moved and stored easily.

4. This is not a garden hose.

Product description

Please review all product information to ensure that this product is compatible with your unit./p>

Before processing a product for warranty, it must be verified as the correct part by the OEM part number(s) and/or model number(s). If you have any questions or concerns, please ask.

A Message to the Customer

The ROP Shop staff constantly strives to provide clear and concise product information. We understand that sometimes it can be difficult to confirm product compatibility. It is your responsibility to confirm this is the correct product you need; therefore, we encourage all customers to fully review the information provided in this listing prior to purchase. Any specific models stated in the listing are potential matches only and not a guarantee of compatibility. Nothing is worse than having to return a product, trust us…we get it. Let’s work together to avoid this! If you are unsure as to whether or not this is the correct product for your unit, please ask. If you seek assistance we will need as much of the following information as possible, if applicable, to help you find the product you are looking for:

Model and/or Sub-model

Spec and/or Type Number

Code and/or Serial Number

Year

Engine Horsepower

Our knowledgeable product specialists are always willing to help you verify product fitment. Stay rugged, my friend.

-The ROP Shop Staff

• New 2600 psi PRESSURE WASHER WATER PUMP
• Fits Powerstroke PS80903A w/ 7/8" Horizontal Short Shaft
• 2400-2600 PSI  /  2.3-2.4 GPM
• Garden hose hookup / 22mm Outlet
• Fits 7/8" Short Shaft Engines 1-1/2" or less

User questions & answers

Question:	Will this fit XR
Answer:	Yes,that is the one I used mine for.
Question:	Will this fit a Craftsman
Answer:	Do your research on shaft size and pump placement,if it matches then yes
Question:	Will this pump work with a 7/8"dia shaft and bolt pattern of 2 5/8" for mounting on a vertical shaft engine ? honda 5.5 gcv
Answer:	Yes, I have the same Honda engine on my power washer.
Question:	Will this work on a Briggs & Stratton engine with a 7/8" diameter shaft that is 2 1/2" long
Answer:	It should.

Product description

NEW 4500 PSI TURBO NOZZLE

 

For use with most gasoline pressure washers and electric pressure washers up to 4500 PSI Honda, Generac, Ryobi, Powerstroke etc. (Cold water use only)

 

This is a turbo nozzle with a quick connection                

Whirls a powerful pin-point water jet for highly effective cleaning. Great for cleaning brick, concrete and vinyl surfaces.

 

Multiplies ordinary pressure into powerful scrubbing power using a jet stream of rotating water. It's powerful strike makes it ideal for cleaning large, flat surfaces such as driveways, side walks, patios etc...

Increase pressure washing efficiency, with this amazing Pressure washer tip!!!

 

Turbo Nozzle Specs:

Color: Black

GPM: 4.0

Max PSI: 4500

Connection Type: 1/4" Quick Connect

 

YOU GET FULL CUSTOMER SUPPORT TO ADVICE YOU ON ANYTHING YOU MIGHT NEED!

Please check your specifications before making the purchase.

• ✦ MAXIMUM PERFORMANCE ✦ Delivering extreme power force and great flexibility while being compact. This is our spray nozzle with 4500 PSI / 310 bar ultimate pressure. Such an unbeatable cleaning performance gives you the freedom to clean anything, anywhere!
• ✦ AMAZING VARIABILITY ✦ Fits majority of gas pressure washer, electric pressure washer on the market thanks to the standard ¼" quick-coupling connector. With compact dimensions and "fits all" connection solution this turbo nozzle is simply a go-to product for your heaviest household cleaning jobs.
• ✦ FIRST CLASS PRODUCT ✦ Body and connector finely produced from supreme brass, with razor sharp ceramic nozzle inside and rubber exterior for better grip, this is the perfect combination for the toughest jobs in your garden.
• ✦ VERSATILE HELPER ✦ Our nozzle is ideal for quick, easy and efficient cleaning of soiled bricks, concrete, vinyl or any other large amount of dirt or heavily soiled areas. It is not suitable for delicate surfaces. One of the best Power Washer attachments.
• ✦ FASTER PRESSURE CLEANING ✦ Turbo nozzle creates a powerful and fast, in circle rotating 0° beam of water. This enables you to clean up to 40% faster than with a standard non-rotating nozzle. Please check the pressure and flow of your machine before ordering. The min. working pressure of this nozzle is 2200PSI. This nozzle won't work with washers which deliver lower pressure!

User questions & answers

Question:	Will this nozzle work with the Worx Hydroshot
Answer:	NO, it will NOT. You need a legitimate pressure washer putting out some serious pressure. The Worx Hydroshot is not really a pressure washer. It is a battery powered sprayer.
Question:	How far can I expect the stream to reach when used with a 1500psi electric pressure washer
Answer:	Might not work too well with a low powered washer. 2700 psi works great 4ft

• JRod for 4 GPM Pressure Washer | 4 Way J-Rod Tip Holder

User questions & answers

Question:	Does this work with my 4.5 gallon unit
Answer:	Yes, should fine, works real well while down streaming with a pressure washer
Question:	Is this fit to standard pressure washer gun? Mine is Craftsman 3000 psi, 2.5 gpm
Answer:	Yes it will but is rated for 4gpm but it will work
Question:	Does this holder include the tips
Answer:	Tips are included
Question:	Any guess how high it will shoot with a 4gpm/4kpsi machine
Answer:	No idea since the seller has never responded to my negative review and issue. I would not buy from this seller. With the right tip, 30 should be no problem.

Product features

J-Rod Tip Holder

• Using a J-Rod nozzle holder is another way to have a variety of nozzles right at your fingertips if you choose to downstream your chemicals.
• Downstream methods will keep harsh chemicals out of your pressure washer and in some cases help reach those hard to get places without ladders or heavy equipment.
• The amount of spray height to be expected vertical with a 4 gallons per minute pressure washer is around 15-20 ft.
• This J-Rod set up can be used in any standard 1/4" Quick Connect Socket
• Allows you to keep all of your tips together and quickly switch from one size to the next.

Product description

The Westinghouse WPX3200 3, 200 PSI 2. 5 GPM Gas Powered Pressure Washer has the muscle to blast away grime from even your toughest cleaning jobs. Built from a powerful 4-Cycle Horizontal Shaft OHV Westinghouse Engine, its meant for a powerful heavy-duty cleaning. From a range of 5 nozzle tips with varying degrees of pressure, you can interchange the heads to suit your specific challenge of the day. Constructed with a 3. 3 liter fuel capacity and convenient 1. 6 liter soap tank on its side, the WPX3200 is safe to use on brick, stone, concrete, wood, aluminum, and iron. A tough steel frame construction and never-flat wheels that offer easy roll-away mobility, allowing you to maneuver the strength of this washer to scale across walls and get into hard to reach corners. Deep cleaning projects such as decks, sidewalks, siding, fences, railings, garage floors, exterior walls, cars, or patio furniture is easier than ever before.

• 3200 PSI and 2. 5 GPM of Powerful, Deep-Cleaning Water Pressure Perfect for Decks, Sidewalks, Siding, Fences, Railings, Garage Floors, Exterior Walls, Cars and Patio Furniture – Easy to Fill 1 Gallon Gas Tank
• Half Gallon Onboard Soap Tank With 25′ Foot Abrasion Resistant Super-Flex Hose With Lightweight Spray Gun and 5 Quick Connect Nozzles (0°, 15°, 25°, 40° & Soap)
• Heavy Duty Gas Powered 212cc 4-Stroke Westinghouse OHV Horizontal Shaft Engine with Recoil Start - Long Lasting, Maintenance-Free Axial Cam Pump Provides 2. 5 Gallons of Water (and Soap! ) a Minute
• Tough Steel Frame Construction With 12″ High Profile, Never-Flat Wheels Provide Easy Transportation and Maneuverability – Includes Engine Oil, Tools, and Quick Start Guide to Get Started in Minutes
• All Westinghouse Pressure Washers are Functionally Tested in the Factory and May Contain Minimum Residual Oil and/or Fuel Odor; CARB Compliant; Backed by 3-Year Limited Manufacturer Service, Labor, and Parts Coverage

User questions & answers

Question:	Does the spray wand allow for a circular surface cleaner to be attached
Answer:	I assume you are talking about a turbo tip. Yes it attaches just like regular tips. Be sure to use one rated the same as the unit, in this case 3200 psi. Do Not Use one rated below 3200 psi. You could use one slightly higher, say 3300 psi, but any higher and you lose some power.
Question:	Will I need another gun and nozzle to reach a 2 story gutter
Answer:	Yes, It doesn't reach the top of a second story with much pressure. Might clean the bottom and outside but not the inside. You can get an extension kit with a hooked end for cleaning out gutters on amazon.
Question:	Is the pressure still good at 25 deg? I want a wide but powerful spray for my 30 ft driveway
Answer:	Yes, that is the tip that I use for my driveway and sidewalk on a bi-annual basis.
Question:	When swiching frm soap mode to rinse mode how do you shut off the soap? Do you disconnect the soap hose
Answer:	When you remove the black LOW pressure tip the soap stops picking up. So all the other tips are rinse tips. I am looking for an add on soap dispenser now so that I can use a longer range (higher pressure) tip to apply the soap too. For say the peak of a house.

Product features

Westinghouse WPX3200

Powerful.

Built from a genuine OHV Westinghouse engine and equipped with vigorous high-pressure water flow.

Durable.

Protected by robust steel framing and abrasion-resistant materials for dependable cleaning.

Convenient.

Custom designed for instant portability and adaptability.

The WPX3200 is the perfect companion to tackle any cleaning challenges that come your way.

Annihilate dirt from your life with the Westinghouse WPX3200.

Axial Cam Pump

Maintenance-free axial cam pump is small, light, and compact to allow for a self-priming air-free pumping condition while operating at maximum pressure.

Nozzles

Five quick-change nozzle tips include:

• 0° - red, highest pressure, high precision spray
• 15° - yellow, high pressure, small angle spray
• 25° - green, medium pressure, medium angle spray
• 40° - white, low pressure, wide angle spray
• Soap application tip - black

Soap Tank

Dedicated soap line doubles your cleaning power by allowing the ability to add your own detergent or chemical in accordance to the surface you are cleaning.

Product description

• This is a set (2 pieces) of standard Stainless Steel Quick Connect Fittings for your pressure washer Hose



• Rust Free for long life.



• Fits any 3/8” Female QC fittings or 3/8” Female Pipe Thread



• Max. Working Pressure: 6,000 PSI



• 2 pcs: 3/8-Inch FPT Stainless Steel quick coupler plug

• 2 x STAINLESS STEEL 3/8" Male Pipe Thread x 3/8" Male Quick Connect Plug CHEMICAL RESISTANT for Long Life
• CHEMICAL RESISTANT for Long Life
• Withstands MAXIMUM PRESSURE up to 6000 PSI
• UNIVERSAL Fitting for most Gas Power Washers
• Fittings can be used to attach a pressure washer accessories to the water pumps, hose reels, ball valves, telescoping wands, surface cleaner or regular spray guns

User questions & answers

Question:	Will this work for my Mv925 spray gun
Answer:	These fittings will work for any high pressure trigger gun that has a 3/8” Male Pipe Thread (MPT) inlet connection with a max pressure rating of 6000 psi.
Question:	What type of Stainless Steel is it made of
Answer:	Good stainless steel and it just like other regular stainless steel.
Question:	What is the thread size on these
Answer:	I think is 20
Question:	Are these npt? It will only go in a couple threads and then stops
Answer:	Yes the threads on these connectors are 3/8” NPT. I used one of them on an MTM Hydro SG28 spray gun. Use teflon tape on the threads before screwing the connector into whatever component you are using and make sure that your component has the noted thread size.