13 best submersible fountain pumps

• UL Certified & WATER FLOW CONTROL -- Our water pump meet UL 1081standard. An Adjustable Knob to control the water flow rate, so you can get just the amount of water pressure you want. Maximum flow rate: 550GPH (2000L/H).
• STRONG POWER & HIGH LIFT -- Max Lift Height: 7.2ft. Model number is SML-630. 30W high efficiency motor for energy saving. Lift height is a max height the water goes up, after connecting the water pipe to the nozzle (Make sure the joint sealed securely and tightly).
• 3 NOZZLES -- Each water pump has 3 nozzles for option: 0.51"/0.62"/0.75". Provide a different water flow as you desired. Threaded fittings make it more stable. Detachable and cleanable.
• SUCTION CUP & 5.9FT POWER CORD -- Long enough cord for easy installation. 4 individual powerful suction cups help keep it in place, so you can stick it on the right side of the aquarium, either vertically or horizontally.
• WIDELY APPLIED -- Circulate and aerate the water, making it more attractive to your fish or turtles. This submersible pump is perfect for aquarium, fountains, spout and hydroponic systems, etc.

User questions & answers

Question:	Does this have auto shut off
Answer:	Auto shutoff for what purpose? Two possibilities would be: A timer would switch it ff and on at prearranged times. For a malfunction due to no water going through, you will ideally want to power it through a ground fault interrupt circuit so in the event the water source accidentally runs dry the pump will not burn out.
Question:	What is the thread size that the outlet nozzles screw into? I want to screw a threaded pvc fitting into the pump and need the female thread size
Answer:	It is a 1/2" thread, not 3/4".
Question:	What is the pipe thread size of the discharge side of the pump
Answer:	It is a 1/2" thread.
Question:	is there a flow chart for differences in head pressure
Answer:	I have not seen one. The smaller the tube you hook up to the pump, the higher the pressure and the farther the water will be pumped.

Product features

PACKAGE INCLUDES:

• 1 x 550GPH Water Pump
• 1 x 0.51" Nozzle
• 1 x 0.62" Nozzle
• 1 x 0.75" Nozzle

SPECIFICATIONS:

• Voltage:110-120V
• Power: 30W
• Color: Black
• Max Flow Rate: 550 GPH (2000L/H)
• Max Lift Height: 7.2 Ft (2.2m)
• Length of Power Cord: 5.9 Ft (1.8m)

3 NOZZLES FOR OPTION:

• This water pump comes with 3 nozzles for option: 0.5"/0.62"/0.75".
• Provide a different water flow as you desired.
• Threaded fittings make it more stable.

FEATURES:

• This water pump is designed for reliability and ultra-quiet operation to provide years of service, energy-saving and low power consumption.
• The impeller shaft is stainless steel, strong driving, long working life.
• An Adjustable Knob to control the water flow rate, so you can get just the amount of water pressure you want.
• The water pump is easy to detach to clean.
• 4 individual powerful suction cups help keep it in place, so you can stick it on the right side of the aquarium, either vertically or horizontally.

WIDELY USED:

• You can use this pump to circulate and aerate the water, making it more attractive to your fish or turtles.
• This submersible pump is perfect for aquarium, fountains, spout and hydroponic systems, etc.
• The pump also can be used to make outdoor fountain or waterfall for your garden.

NOTE:

• Please clean it regularly to avoid debris blockage, otherwise it makes noises.
• Please do not use it without water.
• Please put the pump into water first before connecting power supply.
• Please cut off power if changing water.
• Please cold water only.

• 【Specifications】Dimensions: 4.1*2.6*3.5inch. The 5ft long power cord offers convenient installation. An Adjustable Knob to control the water flow rate, so you can get just the amount of water pressure you want. Max Flow Rate: 800 GPH (3000L/H), Max Lift height: up to 10 Feet. Watt: 24W; Voltage:110-120V.
• 【Detachable & Cleanable】This profile size water pump is easy to hide or disguise.The device doesn't need any tools to disassemble it and is very easy to be cleaned.
• 【Optional Outlet Positions】Place the pump flat on its base, and you can get many positions. Manually rotate into the desired position.
• 【Wide Application】: High Performance Energy-efficient Pumps designed for use in Ponds, Fountains, Waterfalls, Hydroponic systems, Irrigation systems and water features.
• 【Warranty】: Super durable & reusable; Comes with 1-Year warranty; Any problems with the item you received, please contact us without hesitation.

User questions & answers

Question:	Can this be used to pump manure tea to garden plants? The tea is made from manure in fine mesh bags which is then placed in fresh water
Answer:	Yes
Question:	What size tubing should you buy to fit the .74 inch adapter
Answer:	Can i use 3/4 or 5/8 pvc ? Is there any adapter come with the pump to use pvc?
Question:	Where exactly is the inlet? If used as a small sump pump, how much water will be left
Answer:	The inlet is in the middle of the pump, in the front. So, whether you stand it up like it is in the picture or lay it down on its side, you would have at least 1", maybe 2" of water left. Hope this helps.
Question:	Does it have / need oil or lubricant? Would keg lube work
Answer:	no need to lube. just plug and run it in water.

Product features

VIVOSUN 800GPH Water Pump

• This pump can be used in either wet or dry installations and features wet rotor/wet bearing technology for cooler running. Pre-filter screen handles large particles require less maintenance. Designed for fresh water use only.
• Compact design is great for space-saving on your aquariums and fish tanks. Multiple size insert fitting and suction cups included.

3 oulet adapters

Equipped with three nozzles, first one is 0.51inch diameters, second one is 0.62inch, the third one is 0.74inch, providing different water flow effects depending on your needs.

Water control valve

Designed with a adjusting knob, allowing to adjust the water flow rate, the maximal flow rate can be up to 800GPH (3000L/H).

4 suction cups

The 4 suction cups are strong and require no extra tools to secure. You can choose vertical or horizontal fixing according to your needs.

Parameter details

Power: 24W; Voltage: 110-120V

Flow: 3000L/H; Power cord length: 5ft

Working environment temperature: 1-36 °C

Product description

Do you want to give your lovely fish a near-natural environment? Our fountain pump can make circulation to your tank and the peaceful sounds of our fountain make them even more enjoyable.



Fountain pump Features:

✿ Durable 25W super efficiency motor continually lift water column, fountain pump voltage is 110 V-120V/50-60Hz

✿ Max flow rate: 400GPH (1500L/H)

✿ Max lift height: 6.56ft/2m

✿ Long power cord: 6.5ft/1.9m, is heavy duty and easy to installation

✿ 4 strong rubber suction cups at the bottom of the fountain pump help keep in place (steady stay, suit vertical or horizontal mounting), you will get 6 rubber suction.

✿ 3 nozzles---0.51in 0.62in and 0.75in, pump nozzle threaded design makes it more stable

✿ Compact but powerful: fountain pump is 2.3*2.8*3.2inch easy to hide & disguise

✿ Sturdy: High quality motor provides a quiet environment for you. The fountain pump impeller shaft is stainless steel for long life span and corrosion resistance.

✿ Adjustable water flow rate: This fountain pump has an adjustable knob to control the water flow rate.

✿ No need any tools to detach the fountain pump, easy to clean.

✿ Safe: The fountain pump is safe for fish with no exposed copper and oil free.



Note:

①Don’t open the fountain pump without water, keep the water clean or clean the pump or add some olive oil on the rotor to improve the submersible pump’s life and performance.

②Insufficient power and insufficient frequency would affect the fountain pump’s flow rate.

③400GPH refers to the flow rate without using a pump water pipe. If connected with a pump water pipe, the fountain pump maximum flow rate would less than 400GPH.

④Three different sizes nozzles are provided. If you use the smaller one, the maximum flow rate would less than 400GPH.

⑤Don’t use in salt water.



Package include:

1*25w fountain pump

3*nozzles

2*extra suction cups

1*cleaning cloth

• ★【PROVIDE YOU COMFORT & QUIET ENVIROMENT】Our fountain pump’s ultra-quiet operation will let you feel that the sounds of the water pouring out of your fountain is such a relaxing and tranquil sound, and you will love sitting out on your patio watching the squirrels and birds bath and now the peaceful sounds of our fountain make it even more enjoyable.
• ★【MULTI-OCCASIONS】The fountain pump can make circulation to your tank and give your lovely fish a near-natural environment. This submersible water pump can create water current, ideal for a medium-sized aquarium, small pond, water garden, and desktop water fountains. Perfect for backyard fountain/waterfall, aquarium, ponds, fish tank, tabletop fountains, garden statuary, patio drip irrigation system and hydroponic systems and more.
• ★【ADJUSTABLE】The fountain pump is designed with an adjusting knob, allowing to get just the amount of water pressure you want. It comes with 3 optional nozzles to create different views, each with its own unique design.
• ★【COMPACT BUT POWERFUL】The fountain pump’s compact design is easy to hide & disguise, 25W super efficiency motor continually lift water column. reasonable long power cord is heavy duty and easy to installation. The pump has 4 strong rubber suction cups at the bottom of the fountain pump help keep in your fish tank.
• ★【EASY TO USE】The fountain pump's manual disassembly designed shell allow you clean the pump input port and filter/impeller easily. And simply plug in power for quick water draining.

User questions & answers

Question:	Why can't this be used in saltwater
Answer:	When you are on the specific product page, scroll down to the PRODUCT INFORMATION. On the right side go to TECHNICAL SPECIFICATION. There should be a clickable field called “User Manual”. Click to view the Manual for that product. If having trouble, please contact Alpine Corp. via Phone – 877-460-4511, Text – 323-201-4431 or Email – [email protected]. Thank you for your interest in Alpine products.
Question:	How is the front cover removed from the body? Instructions don't say how
Answer:	The water features dimension is 16.65" Long, 10.24" Wide and 30.71” Tall
Question:	What are the dimensions of the pump
Answer:	I think that would just fine as long as it wasn’t impeding water flow
Question:	I plan to use it to replace an existing pump. Whatis the "tall" dimension with the outlet facing up
Answer:	Yes, it comes with everything you need!

• 【Best LED Fountain Pump on Amazon】: New design LED fountain pump, great for decorating your indoor fountain,small water features,Small pool, garden, pond, statues, fish tank, aquariums. So cool, the shining LED Mini fountain will helps you get relax and enjoy the wonderful day and night!
• 【12 LED lights】: The fountain pump uses 12 super bright energy-saving LED colorful lights and 4 colors (red, blue, green, yellow) lights. Water pump LED lights provide amazing night lighting and its waterproof.
• 【Ultra Quiet & Easy Installation】: Stable & duarable motor works smoothly and quiet, provide you a comfortable environment, Dimensions: 2.4*2.7*1.7inch. The small size makes this water pump easy to hide or disguise. Free tool disassemble design, very easy to clean and maintenance. 6.0 feet (1.9m) power cord for easy installation. Pump equips 4 strong suction cups, its very convenient and steady to install it to the glass/flat surface, energy-saving, low power consumptions.
• 【Water flow control】: Side design flow control valve, free to adjust water flow under your demands. Max Lift Height: 4.0ft. (The lift height is based pumping water with standard tubing, not free tubing pumping lift, the more lift, the less flow) Maximum flow rate: 160GPH.
• The free gift tubing is made of silicone, if you find any kinked marks on the tubing, please stretch it up and leave it on the floor for a few hours, it will back to normal again.

User questions & answers

Question:	What is the size (circumference) of the led light ring
Answer:	My pump has worked perfectly. I did put a filter around the intake valve,,as it was sucking up my fish. I clean it every few weeks.
Question:	does this small submersible fountain/pond pump with colored led lights come with the tubing that is shown with listing
Answer:	1/2 inch inside measure
Question:	I like this pump but I want to use it in a very large bowl that is only about 8 or 9 inches deep. Seems it is too big. Do u have a smaller led pump
Answer:	I barely have it out of the package but it appears to be 6' long.
Question:	can you select which lights you want to run or do they all come on at once or cycle
Answer:	mine is a 3/8" connection

Product features

PULACO 160 GPH LED Fountain Pump

Warm Note:

1. Put the pump into water first before connecting power supply. When changing water, please disconnect power supply.

2. Please clean it regularly, the pump would make noises if blocked by debris.

3. Please make sure that the joint between connector and water pipe has been sealed tightly.

4. US Standard Plug is included in the package, which is only suitable for the US, Canada and Mexico.

Pump with LED Light

Water pump LED lights provide amazing night lighting and its waterproof.

Stainless steel Shaft

Stainless steel standard rotor, anti-corrosion, anti-rust, wear resistant, long service life.

Copper wire motor

100% copper wire motor, more stable and efficiency, low noise.

Tubing

Package include one piece of 3.3ft free tubing.

Product description

Product Advantages

☑Dry running protection:We have better dry running protection that could cut off the power supply.

so you do not need to worry about the pump will burn out when there is no water or forget to cut off the power supply when you out for a trip.

☑Easy:with the buckle design, you could assemble and disassemble product easily and clean it easily.

☑Ultra Quiet Design & Perfect Motor: The reliable and durable motor does not produce much noise, giving you quiet environment.



Product Parameter

Dimension: L73*W52*H70(mm)

Voltage: AC 120V

Outlet Diameter: 13mm

Power:10.2W

Max Flow Rate:200GPH

Max Head:5.0ft



Tips

1.Please read the User Manual before using

2. Please use socket with stable voltage and keep the motor running within rated power to ensure long lifespan.

3. When changing water, please disconnect power supply.

4. Please clean it regularly in case of debris blockage, the pump would make noises if blocked.

5.Please note if the water level, layout of the water tank match the bump power before purchasing.

If the water is too little and do not complete overlay of the water pump, it will reduce the pump's life time seriously.

Package

1*Pump

2*nozzles

1*Instruction manual

• 【DRY BURNING PROTECTION FOUNCTION】 It would cut off the power supply when the temperature of pump is high, . No need to worry about there is not enough or no water in your fish tank or fountain when out for a trip.
• 【WATER FLOW CONTROL】 An Adjustable Knob to control the water flow rate, so you can get just the amount of water pressure you want. Maximum flow rate: 200GPH.
• 【ULTRA QUIET DESIGN】 Running at a whisper-quiet level, the motor inside produces no noise, which gives you a quiet environment even with one in your bedroom.
• 【HIGH PERFORMANCE】 After a period of use you will find out that our water pump is "High flow rate, Low power consumption,Energy-saving"
• 【WIDE APPLICATION】 Circulate and aerate the water, making it more attractive to your fish or turtles. This submersible pump is perfect for aquarium, fountains, rockery and hydroponic systems...

User questions & answers

Question:	Does this have an on-off switch
Answer:	No I plugged mine into a outlet that was controlled by a light switch. It worked great.
Question:	Would this pump be to strong for a 6-7 gallon large pot fountain
Answer:	In my case the pump is in the basin of 16 gallons for a fountain. The pumping height is about 3 1/2 to 4 feet. Fountain is a pretty large wall type. Hope this answers your question.
Question:	Has this pump have filter system
Answer:	Yes it has a filter. The product works very well and super easy to install.
Question:	Can fu Juan pump be substituted for jier
Answer:	The jier 600, that’s 150gph right? Well this one is like 200 gph but that’s alright it’s Just less water per hour as long as you don’t have a higher destination( mine pumps 2 ft up from under a water fountain)and you don’t mind a lesser output. It should work. FYI I like the “low water shut offs for outside fountains as I saves the pump from burn out if water gets low on vacation 👍🏾

• WATER FLOW CONTROL. An Adjustable Knob to control the water flow rate, so you can get just the amount of water pressure you want. Maximum flow rate: 400GPH.
• STRONG POWER and HIGH LIFT. 25W high efficiency motor for energy saving. Max Lift Height: 6.9ft.(Make sure to connect a water pipe to the smallest nozzle , make sure the joint sealed securely and tightly).
• ULTRA QUIET DESIGN with 2 NOZZLES (0.51in and 0.62in). High quality motor provides a quiet environment for you. Threaded fittings make it more stable. The impeller shaft is stainless steel for long life span and corrosion resistance.
• SUCTION CUP and 5.9Ft POWER CORD. Long enough cord for easy installation. 4 strong suction cups at the bottom of the pump help keep it in place, so you can stick it on the right side of the aquarium, either vertically or horizontally.
• WIDE APPLICATION. Circulate and aerate the water, making it more attractive to your fish or turtles. This submersible pump is perfect for aquarium, fountains, spout and hydroponic systems, etc. Backed by professional after-sale service within 24hrs.

User questions & answers

Question:	What size tubing can I put
Answer:	See where it says "also bought" 1/2" tubing? I'm not the brightest bulb when it comes to plumbing, so I "also bought" 1/2" and I'm going to have to "also buy" something else because it is exactly the outer diameter of the small nozzle and much too loose to stay on the large nozzle. Like trying to fit one nickel inside another one. The trouble with buying things like this sight-unseen. Half inch INNER diameter tubing (5/8" outer) would work on the small nozzle but restricts flow somewhat. The large nozzle is (about, I don't own calipers) 7/16". Something tells me the nozzles are actually metric while the tubing is inches.
Question:	How do I do water changes with this
Answer:	There is a dial on the side that helps adjust the water flow rate, so you can control how much bubbles you want to produce.
Question:	What is minimum flow rate? I want to use for a trickle waterfall in a vivarium
Answer:	I don't know what that rate would be. But let me tell you that I put this pump in my outdoor fountain and I had to close the valve as far as it would go without turning it off, to keep it from shooting up too high and strong. My fountain was pushing water up at least 18 inches before it comes out. So this pump may be just too strong if you want something to trickle. I had a little 200 gal flow pump that was a little too weak at full strength. So something like that might work better for you.
Question:	Can this pump be able to be used to drain a hot tub
Answer:	Turn your garden hose on, put it into the bottom of the hot tub. Walk to the faucet and unscrew the garden hose while the water is still turned on. Turn off the faucet. The flow will reverse and your hot tub will empty with just a garden hose.

Product features

Homasy 400GPH Ultra Quiet Submersible Pump

This Homasy upgraded submersible pump is equipped with a powerful motor that pumps 400 GPH at a height of 6.9ft. It features an knob to adjust water flow as needed. Come with 4 strong suction for reliable set-up and quiet environment, ideal replacement pumps for fountains, statuary and small water features to keep moving water.

Specifications:

Max Flow Rate: 400GPH

H-Max: 6.9ft

Power: 25w

Length of power cord: 5.9ft

Product description

Specifications

Max Flow Rate:200GPH

Max Head:5.2ft

Length of power cord: 6.1ft

Power: AC110-120V/60Hz 11W IPX8

Nozzles: 1/2in, 1/3in

Dimension: L2.72*W2.0*H2.24(in)



Package Include:

1*Pump

1*Instruction manual

2*nozzles



Note:

1. Please use socket with stable voltage and keep the motor running within rated power to ensure long lifespan.

2. If the product suddenly stop working or makes noises, which may caused by debris blockage. Please clean it regularly，about once every two weeks, or add some olive oil on the rotor.

3.Please pay attention to the water level and layout of the tank before purchasing. If there is too little water, the motor power is too high, and as the water level changes, the splashed water will make a lot of noise. Different pumps are suitable for different water tanks.

4. The maximum flow rate is 200GPH; there might be a plus-minus tolerance, Insufficient power and insufficient frequency would affect the flow rate.If connected with a water pipe, the maximum flow rate would less than 200GPH. If the water sprays out the container, the flow rate would also less than 200GPH.

• 【ULTRA-QUIET DESIGN & LONG LIFE】In order to keep the pump quiet and have a longer life, increased the cost by using high quality rotor and 100% pure copper,make the pump quiet & long life.
• 【DRY BURNNING PROTECTION】Considering that the users will forget to add water, we have added a temperature control protection switch inside the pump. When the pump is running-dry, it will automatically cut off the power when the temperature of pump is high,360-hour dry burnning protection,Don't worry that there is no water in your fountain, which will cause the pump to burn out.
• 【HIGH PERFORMANCE】 After a period of use you will find out that our water pump is "High flow rate, Low power consumption,Energy-saving &long life".
• 【WATER FLOW CONTROL】 An adjustable knob to control the water flow rate, so you can get just the amount of water pressure you want. Maximum flow rate: 200GPH(750L/H).
• 【DETACHABLE & CLEANABLE】 No need any tools to detach it, easy to seperate, easy to clean.

User questions & answers

Question:	Is this pump made in China? If not, where
Answer:	The light ring is approximately 1-1/2”
Question:	What is the warranty
Answer:	I believe so, at least I don't remember buying any. Plus buying tubing without knowing the exact size would be a pain.
Question:	Will 1/2 tubing with 1/2 id & 5/8 od fit the 13mm (.51 inch) nozzel
Answer:	I use this pump in my feature that is 8" deep with a fountain that is 8" from top of water. I have it on full flow, but the flow can be adjusted down.
Question:	Does this pump meet Australian standards
Answer:	All at once and cycle. No control

Product features

Knifel 200GPH Submersible Water Pump

The small size makes it easy to hide&install, perfect for fountains,fish tanks,small ponds&hydroponic systems etc..

Ultra Quiet Design

Using advanced technology and high quality materials，noise less 30% than other pumps.

Dry Burning Protection

This pump will automatically power off once the motor overheated, and restart automatically after motor cool down.

Water Flow Control

An adjustable knob to control the water flow rate, so you can get the pressure you want. Maximum flow rate: 200GPH.

UL Approved

Knifel pumps are UL listed, Beware of other brands that do not have certification.

Fountain

Aquarium

Pond

Hydroponic

• WATER FLOW CONTROL -- An Adjustable Knob to control the water flow rate, so you can get just the amount of water pressure you want. Maximum flow rate: 1050GPH (4500L/H). The impeller shaft is stainless steel for long life span.
• STRONG POWER & HIGH LIFT -- Max Lift Height: 13.1ft. Model number is SML-4500. 100W high efficiency motor for energy saving. Lift height is a max height the water goes up, after connecting the water pipe to the nozzle (Make sure the joint sealed securely and tightly).
• 4 NOZZLES & PUMP BARRIER BAG -- GROWNEER water pump has 4 nozzles for option: 0.51"/0.62"/0.75"/1". Provide a different water flow as you desired. Threaded fittings make it more stable. The pump bag designed with drawstring prevents debris from getting into the pump to damage it, minimizing the damage to the pump from debris.
• SUCTION CUP & 14.8FT POWER CORD -- Long enough cord for easy installation. 4 individual powerful suction cups help keep it in place, so you can stick it on the right side of the aquarium, either vertically or horizontally. Detachable and cleanable.
• WIDELY APPLIED -- Circulate and aerate the water, making it more attractive to your fish or turtles. This submersible pump is perfect for aquarium, fountains, spout and hydroponic systems, etc. Meet UL 1081standard.

User questions & answers

Question:	Where can I get an extension tube (rigid) to fit this pump
Answer:	If 1/2” PVC is rigid enough, you should be able to get an adapter to transition from the pump fitting to the PVC at Home Depot.
Question:	Is there a warranty on this pump. I bough the pump on July
Answer:	If you just bought it and it’s not working, I would return it too Amazon. I don’t have the box mine came is so I’m not sure about a warranty, but it should be guaranteed for longer than a month!
Question:	where can I purchase a new filter for the pump
Answer:	I purchased the pump through Amazon Prime and also got replacement filters there.

Product features

PACKAGE INCLUDES:

• 1 x 1050GPH Water Pump
• 1 x 0.51" Nozzle
• 1 x 0.62" Nozzle
• 1 x 0.75" Nozzle
• 1 x 1" Nozzle
• 1 x Pump Barrier Bag

PUMP BARRIER BAG

• Length: 11.8in
• Width: 11.8in
• The pump bag designed with drawstring prevents debris from getting into the pump to damage it, minimizing the damage to the pump from debris.

SPECIFICATIONS:

• Voltage:110-120V
• Power: 100W
• Max Flow Rate: 1050 GPH (4500L/H)
• Max Lift Height:13.1 Ft (4m)
• Length of Power Cord: 14.8 Ft (4.5m)

4 NOZZLES FOR OPTION:

• This water pump has 4 nozzles for option: 0.51"/0.62"/0.75"/1".
• Provide a different water flow as you desired.
• Threaded fittings make it more stable.

FEATURES

• This water pump is designed for reliability and ultra-quiet operation to provide years of service, energy-saving and low power consumption.
• The impeller shaft is stainless steel, strong driving, long working life.
• An adjustable knob to control the water flow rate, so you can get just the amount of water pressure you want.
• The water pump is easy to detach to clean.
• 4 individual powerful suction cups help keep it in place, so you can stick it on the right side of the aquarium, either vertically or horizontally.

WIDELY USED

• You can use this pump to circulate and aerate the water, making it more attractive to your fish or turtles.
• This submersible pump is perfect for aquarium, fountains, spout and hydroponic systems, etc.
• The pump also can be used to make outdoor fountain or waterfall for your garden.

NOTE

• Please clean it regularly to avoid debris blockage, otherwise it makes noises.
• Please do not use it without water.
• Please put the pump into water first before connecting power supply.
• Please cut off power if changing water.
• Please cold water only.

Product description

fountain pump aquarium pump pond pump

• 【High Quality】Ultra-quiet design and stainless steel makes pump working quiet and long life.
• 【Water Flow Control】The adjustable knob can contorl the flow rate,you can get the amount of water pressure you want. Max flow 200GPH, High Lift 5.2ft.
• 【SUCTION CUP and 6Ft POWER CORD】Long enough cord for easy installation. 4 strong suction cups at the bottom of the pump help keep it in place, so you can stick it on the right side of the aquarium, either vertically or horizontally
• 【2 NOZZLES】SongLong water pump comes with 2Nozzles,0.31in,0.51in, Provide a different water flow as you need. Threaded fittings make it more stable. Detachable and cleanable.
• 【Detachable & CLEANABLE】 No need any tools to detach it, easy to seperate, easy to clean.

User questions & answers

Question:	What are the dimensions of this unit
Answer:	Like 2” w x 3” L x 3” h

• 【ULTRA-QUIET DESIGN & LONG LIFE】In order to keep the pump quiet and have a longer life, increased the cost by using high quality rotor and 100% pure copper,make the pump quiet & long life.
• 【DRY BURNNING PROTECTION】Considering that the users will forget to add water, we have added a temperature control protection switch inside the pump. When the pump is running-dry, it will automatically cut off the power when the temperature of pump is high,360-hour dry burnning protection,Don't worry that there is no water in your fountain, which will cause the pump to burn out.
• 【HIGH PERFORMANCE】 After a period of use you will find out that our water pump is "High flow rate, Low power consumption,Energy-saving &long life".
• 【WATER FLOW CONTROL】 An adjustable knob to control the water flow rate, so you can get just the amount of water pressure you want. Maximum flow rate: 150GPH(550L/H).
• 【Small but Powerful】 The pump is a small pump which has L2.5in*W1.7in*H2.2in, please do not let it to work in a large fountain.

User questions & answers

Question:	Where is it made
Answer:	11-11 1/2
Question:	What does 360 hour anti burn out protection mean. What does the 360 hours refer to exactly
Answer:	After sending back the first pair because they were too small, I ordered the next size up. The next-size-up IS large, but it's a great shower sandal ... and I'm making do with the slightly-too-large size. I shuffle a little, but these are really comfy and well made.
Question:	What are dimensions of the pump without the cover on it
Answer:	sandals
Question:	Is this pump dual voltage; ie can it operate at 220V
Answer:	Hi，dear customer, thnak you for liking our shower slippers, but for the US 11-12, we have no size for that size now, but for your good advice, we will consider to make this size of bath slipper this time. and if we ship them to the amazon, we will inform you to purchase it. thank you.

Product features

Knifel 150GPH Submersible Water Pump

The small size makes it easy to hide&install, perfect for fountains,fish tanks,small ponds&hydroponic systems etc..

Ultra Quiet Design

Using advanced technology and high quality materials，noise less 30% than other pumps.

Dry Burning Protection

This pump will automatically power off once the motor overheated, and restart automatically after motor cool down.

Water Flow Control

An adjustable knob to control the water flow rate, so you can get the pressure you want. Maximum flow rate: 150GPH.

UL Approved

Knifel pumps are UL listed, Beware of other brands that do not have certification.

Fountain

Aquarium

Pond

Hydroponic

Product description

Do you want to give your lovely fish a near-natural environment? Our fountain pump can make circulation to your tank and the peaceful sounds of our fountain make them even more enjoyable.



Fountain pump Features:

✿ Durable 25W super efficiency motor continually lift water column, fountain pump voltage is 110 V-120V/50-60Hz

✿ Max flow rate: 400GPH (1500L/H)

✿ Max lift height: 6.56ft/2m

✿ Long power cord: 6.5ft/1.9m, is heavy duty and easy to installation

✿ 4 strong rubber suction cups at the bottom of the fountain pump help keep in place (steady stay, suit vertical or horizontal mounting), you will get 6 rubber suction.

✿ Each water pump comes with 3 nozzles for option: 0.51in 0.62in and 0.75in

✿ Compact but powerful: fountain pump is 2.3*2.8*3.2inch easy to hide & disguise

✿ Sturdy: High quality motor provides a quiet environment for you. The fountain pump impeller shaft is stainless steel for long life span and corrosion resistance.

✿ Adjustable water flow rate: This fountain pump has an adjustable knob to control the water flow rate.

✿ No need any tools to detach the fountain pump, easy to clean.

✿ Safe: The fountain pump is safe for fish with no exposed copper and oil free.



Note:

①Don’t open the fountain pump without water, keep the water clean or clean the pump or add some olive oil on the rotor to improve the submersible pump’s life and performance.

②Insufficient power and insufficient frequency would affect the fountain pump’s flow rate.

③400GPH refers to the flow rate without using a pump water pipe. If connected with a pump water pipe, the fountain pump maximum flow rate would less than 400GPH.

④Three different sizes nozzles are provided. If you use the smaller one, the maximum flow rate would less than 400GPH.

⑤Don’t use in salt water.



Package include:

2*25w fountain pump

1*6.5ft tubing

6*nozzles

2*extra rubber suction cups

• ★【PROVIDE YOU COMFORT & QUIET ENVIROMENT】Our fountain pump’s ultra-quiet operation will let you feel that the sounds of the water pouring out of your fountain is such a relaxing and tranquil sound, and you will love sitting out on your patio watching the squirrels and birds bath and now the peaceful sounds of our fountain make it even more enjoyable.
• ★【MULTI-OCCASIONS】The fountain pump can make circulation to your tank and give your lovely fish a near-natural environment. This submersible water pump can create water current, ideal for a medium-sized aquarium, small pond, water garden, and desktop water fountains. Perfect for backyard fountain/waterfall, aquarium, ponds, fish tank, tabletop fountains, garden statuary, patio drip irrigation system and hydroponic systems and more.
• ★【ADJUSTABLE】The fountain pump is designed with an adjusting knob, allowing to get just the amount of water pressure you want. Each water pump comes with 3 optional nozzles to create different views, each with its own unique design.
• ★【COMPACT BUT POWERFUL】The fountain pump’s compact design is easy to hide & disguise, 25W super efficiency motor continually lift water column. reasonable long power cord is heavy duty and easy to installation. The pump has 4 strong rubber suction cups at the bottom of the fountain pump help keep in your fish tank.
• ★【EASY TO USE】The fountain pump's manual disassembly designed shell allow you clean the pump input port and filter/impeller easily. And simply plug in power for quick water draining.

• 【ULTRA-QUIET DESIGN & LONG LIFE】In order to keep the pump quiet and have a longer life, increased the cost by using high quality rotor and 100% pure copper,make the pump quiet & long life.
• 【DRY BURNNING PROTECTION】Considering that the users will forget to add water, we have added a temperature control protection switch inside the pump. When the pump is running-dry, it will automatically cut off the power when the temperature of pump is high,360-hour dry burnning protection,Don't worry that there is no water in your fountain, which will cause the pump to burn out.
• 【HIGH PERFORMANCE】 After a period of use you will find out that our water pump is "High flow rate, Low power consumption,Energy-saving &long life".
• 【DETACHABLE & CLEANABLE】 No need any tools to detach it, easy to seperate, easy to clean.
• 【FILTER SPONGE,SUCTION CUP and FOOTPAD】This pump has 1 filter sponge, which can effectively filter large blocks during pumping to prevent water pump blockage, effectively improve the circulation system to maintain a clean water environment.And there are four powerful suction cup or footpad at the bottom of the small pump that fits well on a horizontal or vertical glass surface to keep the pump running smoothly.

User questions & answers

Question:	what is the wattage of this pump
Answer:	The specs show 60 watts, which means its pulling about a half an amp.
Question:	Do you sell a 1" nozzle that fits this pump
Answer:	I doubt the pump could handle that . It’s a very small pump.
Question:	can this pump be used for homemade metal pool, 700 gallons
Answer:	Probably, but not the 880 gph it says. I use it to pump out the low spot in my front sidewalk when it rains and it probably does five gallons an hour...
Question:	Is the flow rate adjustable
Answer:	You can adjust the flow rate down, but not up. All you need is a ball valve on the discharge side of the pump

Product features

Knifel 880GPH Submersible Water Pump

perfect for fountains,fish tanks,ponds&hydroponic systems etc..

Ultra Quiet Design

Using advanced technology and high quality materials，noise less 30% than other pumps.

Dry Burning Protection

This pump will automatically power off once the motor overheated, and restart automatically after motor cool down.

Sponge Filter

Pre-filter on the intake prevents debris from entering your pump and extend the life of the pump.

Indoor and outdoor application

Plug：3-pin plug suit for indoor and outdoor environment.

Cord length:6.1ft.

Fountain

Aquarium

Pond

Hydroponic

Product description

Notice: If you want the fountain to reach a certain height, please attach the pipe.



What most customers think of when he / she is choosing a pump - High quality and not broken easily. So we designed and manufactured our pump with anti-dry safety protection based on the concerned factors mentioned above. It ‘s small but very powerful and energy saving with MAX high lift 8.2ft (2.5meters). We use brushless motor to make it quiet while working. The impeller shaft is stainless steel for long life span and corrosion resistance for even into the sea water. Water flow rate is adjustable and 3 nozzles for water change optional. It is suitable for fish tank, aquariums, ponds, patio, garden, fountains, hydroponic



Our Service

12 month keep in repair. Cutomer service 24hours on line to help you out



30 Day Promise  

No question asked 30 day refund service. If you are unhappy for any reason, get your money back. Rock solid promise....

 

Specification: 

Material - ABS shell Black 

Max Flow Rate - 675GPH (2500L/H, 45W)

Max Lift Height - 8.2ft (2.5m)

Protection - Anti-dry safety protection  motor

3 Nozzles for choice - 0.51",0.62"and 0.74" as picture shown 

Dimension - 4.13" (L) 2.55" (W) 3.54"(H)

Power cord - 1.8meter

Weight - 853g 



Important Note

1. Please clean it regularly to avoid debris blockage, otherwise it makes noises

2. Please do not use it without water

3. Please put the pump into water first before connecting power supply.

4. Please cut off power if changing water

5. Please cold water only



Package Include:

1*Water Pump

1* 0.51" Nozzle

1* 0.62" Nozzle

1* 0.74" Nozzle



If you have any question, please do not hesitate to ask a question about our water pumps

• This water pump designs for indoor fountain, tabletop fountain,patio ponds, outdoor fountain. A general purpose pump with unlimited uses suitable for the artist, creator or inventor, pond, aquarium or in hydroponics, people may use the water fountain on the lowest setting to feed plants,or for breaking the water surface for oxygen in a fish tank.
• STRONG POWER HIGH LIFT, this fountain pump max lift height: 8.2ft(2.5meter). 45W high efficiency motor for energy saving. Lift height is a max height the water goes up, after connecting the water pipe to the nozzle (Make sure the joint sealed securely and tightly)
• ANTI DRY BURNING DESGIN, our motor reaches the certain temperature will stop working when without water, to protect the water pump. Max water temperature:35℃.STAINLESS STEEL PUMP IMPELLER SHAFT, corrosion resistance, strong driving, long working life, so submersible pump also fit for sea water.
• DETACHABLE AND CLEANABLE - No need any tools to detach it, easy to seperate, easy to clean.100% safe,non toxic,non- radioacitivy design with waterproof for kids aged 3-99+.
• SUCTION CUP 3 NOZZLES ADJUSTABLE FLOW RATE, 4 individual powerful suction cups that hold the pump securely on the right side of aquarium, vertically or horizontally. water change pump has 3 nozzles for optional, Nozzle Size 0.51",0.62"and 0.74"

User questions & answers

Question:	What size tubing would you get for this
Answer:	Like with any fountain where water is pouring versus "bubbling" it can splash slightly, depending on how you adjust the flow. If you've got hardwood or carpet in your living room I suggest you go with one that's specifically made for indoor use. Even then read the reviews.