10 best cooper motion sensor lights

Product description

110 Degree, Black, Motion Activated Outdoor Security Floodlight, Durable High Impact Non-Metallic Construction Is Weather Resistant, Convenient Tool Free Lamp & Sensor Head Adjustment, Multiple Motion Detection Zones, Can Be Operated In Manual Override & Turned On From Indoor Switch, Automatically Resets At Dawn To Motion Detecting Mode, Detects Motion Up To 60' To 110', Adjustable Time & Sensitivity Settings, Wall Or Eave Mount, Pre-Wired & Preassembled For Easy Installation, Takes 2 Standard Par Bulbs Up To 150W, Not Included, 2 Year Warranty..

From the Manufacturer

110 Degree, Black, Motion Activated Outdoor Security Floodlight, Durable High Impact Non-Metallic Construction Is Weather Resistant, Convenient Tool Free Lamp & Sensor Head Adjustment, Multiple Motion Detection Zones, Can Be Operated In Manual Override & Turned On From Indoor Switch, Automatically Resets At Dawn To Motion Detecting Mode, Detects Motion Up To 60' To 110', Adjustable Time & Sensitivity Settings, Wall Or Eave Mount, Pre-Wired & Preassembled For Easy Installation, Takes 2 Standard Par Bulbs Up To 150W, Not Included, 2 Year Warranty.

• The wall or eave mountable, motion activated outdoor security floodlight is ideal for use at household or workplace providing a good lighting effect
• Automatically resets at dawn to motion detecting mode. Detects motion up to 60 to 110 feet range
• The product is pre wired and pre assembled for easy installation. Takes 2 Standard par bulbs of up to 150W (Bulbs not Included)
• Has a durable high impact non metallic construction which is weather resistant. Features sensor head adjustment
• This product comes with 2 years warranty
• Manufactured in China

User questions & answers

Question:	is this unit wet proof
Answer:	Thanks for leaving your question on our Led Security Light . The degrees of detection on the motion sensor is 180 degrees.
Question:	I lost my directions right off the bat. How to set the light up for motion detection? On my old one I turned it on, then off for a 20 seconds then on
Answer:	This is the process I go through with this kind of issue: 1. Verify power at the light and that all connections are good (this can be done through test equipment or by hooking up a known working electrical device such as another fixture). 2. Check the switch settings to see if it is still in test mode or something. 3. Adjust the placement of the sensor. 4. Check to see if it is pointed towards water (like a pool) or a white or shiny surface (this can mess up the ir sensor). 5. Contact vendor for any wierd conditions unique to the fixture (such as requiring that the ground wire be hooked up, a connected common wire, etc...)(I don't remember that there are any for this fixture but this part of my checklist).
Question:	Will it work properly mounted to hang from the eaves rather than on a wall
Answer:	Thanks for leaving your question on our motion sensor light outdoor. Please don't worry, the package included a use manual and easy to install it.
Question:	Does this fixture work with LED light bulbs
Answer:	I have the same problem . I think that is the way it is . try adjusting the sensitivity level or removing the lanterns . have to rethink priority for which lighting is more important .

Product description

180° Motion sensor, 300 Watt PAR security floodlight. Motion sensor turns lights ON automatically when motion is detected and OFF after a pre-selected time delay (4 or 12 minutes). Integral photo cell design prevents lights from turning ON with motion during daylight hours (auto modes).

From the Manufacturer

180 degree Motion security floodlight in white. Non metallic sensor head and corrosion resistant die cast metal fixture. This energy star rated fixture detects motion at 180 degrees and up to 70 feet and also includes adjustable time and sensitivity settings so that you can customize fixture for your area. The fixture can be manually turned on and also includes a photo cell so that the fixture only comes on at night and won't use energy during the day. Uses 2 Par 38 incandescent, 120 volt, 2 100 watt maximum (bulbs not included). Comes with a 5 year warranty.

• Energy Star rating
• Motion sensor turns lights on automatically when motion is detected and off after a preselected time delay, 4 or 12 minutes
• Integral photocell design prevents lights from turning on with motion during daylight hours, auto modes
• Lights can be manually turned on from inside light switch after dusk and will automatically reset at dawn
• Power outage protection saves energy by automatically resetting at dawn if lights are triggered by power interruption

User questions & answers

Question:	Will this light work with led par38 bulbs
Answer:	Our inventory has an exp. date of 1/17. It is the new label and now named Spry Moisturizing Mouth Spray.Thanks, Green Earth Nutrition
Question:	Does this one work for ceiling mounted position? Some of the wall mounted light does not allow motion detection rotates to detect horizontal direction
Answer:	It is a pleasant moisturing liquid, like water, mild lemon flavor. I use about 4 sprays, 0ne in each corner of the mouth. It does not last very long but long enough until I fall asleep. Would plain water do the same?, most likely. I follow the spray with a Biotene gel because the spray runs down to the back of the throat and the effect is very transitory. If dry mouth wakes you up a quick spray solves the problem and I go back to sleep. No different from Biotene spray but a better taste.
Question:	There is an extra red wire in this light. I know black goes to black and white to white, but to what do I connect this extra red wire
Answer:	As a previous OASIS user, I can tell you that for me, RAIN provides for a much longer relief. I would imagine that each person would be different depending on the severity of dry mouth. Mine is due to radiation and chemo that all but destroyed my saliva glands. Also, I find that the more I have to speak, the more frequent I would need to respray, but in general, I spray only 2 to 3 times a day plus spraying before going to bed, gets me through the night.

Product description

Cooper Industries MS180 Adjustable Motion SensorCooper Industries MS180 Adjustable Motion Sensor Features:Durable high-impact non-metallic sensor head is weather resistant and provides years of trouble-free serviceEasily installs to one or more existing lights30 motion detection zones, the most of any brandTurns lights on automatically when motion is detected; detects motion at 180 Degree and up to 50 'Adapts to most wall and eave mount applicationsConvenient tool-free sensor head adjustmentAdjustable time and sensitivity settingsPower outage protection, saves energy by automatically resetting at dawn if lights are triggered by power interruption4 or 12 minute time delayApproximate coverage area of 7,600 square feet

From the Manufacturer

180 Degree Replacement Motion Security Floodlight Sensor.

• 180 degree detection zone up to 70 ft.
• Integral photo cell prevents lights from turning ON with motion during daylight hours (auto modes)
• Motion sensor turns lights ON automatically when motion is detected and OFF after a preselected time delay (4 or 12 minutes)
• Turns lights on automatically when motion is detected; detects motion at 180-degrees and up to 70 feet
• Adapts to most wall and eave mount applications

User questions & answers

Question:	The photo doesn't show any wires. Will there be wires
Answer:	JL,Yes....though the photo doesn't show it, there are three wires included in this unit. One goes to the "hot" wire of the circuit, one goes to the neutral of the circuit, and one goes to the load or light you wish to activate. Pretty much any of these replacement sensors are configured this way, although, if you read my review, I do not recommend this one, because of a variety of issues. Rest assured though, for about 3 or 4 dollars more, you can obtain a Heath/Zenith unit, which will work much better.
Question:	Does it come in white? Mycondo requires matching colors
Answer:	Yes it does come in white, but I don't have the white version. You can get it through another vendor I think. Thanks!
Question:	Does it work with regular led lights or only with dimmable leds
Answer:	This sensor works similar to a simple on and off switch. If it is dark and motion is detected it turns on. After a set period of time it shuts off. The load is irrelevant as long as it does not exceed 300 watts. So yes, this will work with both dimmable and nondimmable LED bulbs however, you will not be able to dim the dimmable bulbs.
Question:	has temperature compensation
Answer:	It may have temp compensation but locating it over an opening that is venting a pool area is beyond what the design is set up for. Ron
Question:	Does this come as pictured with the mounting stub or is it just the sensor? Thanks
Answer:	It comes with the mounting stub as pictured. The mounting stub is the standard size for attaching to an electrical box (there are any number of options as to what size and style). I purchased this unit about a year ago and it has functioned flawlessly.
Question:	Can I use two of these in paralled to work one light? I want to mount them on the corners of a garage and turn on one central light
Answer:	My guess is you will burn them out. i tried this once with a water circulation pump (no light in the circuit) connected to a relay. A friend of mine had 3 of these in 3 different bathrooms in his house. the thought was as soon as someone walked into a bathroom, this device would activate a pump which would circulate hot water from the water tank to the fixtures (and hence the cold water in the line back to the tank for heating). We took precautions. first we made sure the power going to the 'hot' and neutral side of the sensors were from the same breaker (otherwise you could accidentally send 240 volts to the load if the sensors were on different sides of the line coming into your breaker panel). Second, we used a relay (mentioned earlier) as 'the load' because the draw (in amps) of the circulation pump was more than the sensor would allow as a pass though (you have to pay attention to the current these things will allow... watts, amps, miliamps - all need to know stuff! - we could have hooked it up directly, but it would have burned them out in short order, not to mention create a fire hazard). Finally, we ran all three of the load wires back to one junction box, tied them together with a wire nut (to complete the parallel connection you are talking about), and connected the load to the trigger side of the relay. we walked in each room and sure enough, the motion sensor engaged the relay, and the motor kicked on and the water circulated as designed. we thought we were home free. after about 2 months, we noticed one of the sensors was no longer activating the relay (and the pump did not run). we could eliminate the motor as it was completely separated from the electrical path. we discovered one of the motion sensors had burned out. replaced it, and all was well, and then a month later, a motion sensor from ANOTHER bathroom burned out. the relay hardly drew any power, so it couldn't be that. then we separated all of them and had three separate relays to engage the pump - never had another issue with burn-out. so what happened? we think if a person 'tripped' the motion sensor, it sent 110 volts to the load side of the other sensors (which were not activated by motion), and that 'back flow' of power messed up the electronics inside the sensors not in use. only explanation that made sense. so long story short, you could connect them in parallel, but i think they would burn out because of a 'back flow' between the devices. when we separated them with individual relays - no problems. e-circulation pump would have drawn more amps than the sensor allows to pass through we ranf the 'load' side of
Question:	Can you disable the dusk to dawn setting
Answer:	yes
Question:	does it come on during the day when detecting motion or just after dark
Answer:	If your application requires it to work during the day just put electrical tape over the photo sensor and it works 24/7. I used sensor to activate a fountain pump 24/7

Product features

Heath Zenith 180 Degree Motion Sensor Replacement, Bronze

The 180° Universal Replacement Sensor has a bronze weather resistant housing. It has an adjustable range up to 70 ft. with a 180° range of motion detection. It has a selectable light timer that can be set for 1, 5 or 10-minutes. Has a daytime shut off, sensitivity adjustment and automatic power outage reset.

EATON Lighting MS180 180 Degree Replacement Motion Security Floodlight Sensor

180° Motion sensor. Motion sensor turns lights ON automatically when motion is detected and OFF after a pre-selected time delay (4 or 12 minutes). Integral photo cell design prevents lights from turning ON with motion during daylight hours (auto modes). Power outage protection: saves energy by automatically resetting at dawn if lights are triggered by power interruption.

• Motion sensor detects motion 180° up to 70 ft.
• Maximum load of 300 Watts

Product description

The All-Pro MS180W is a replacement, adjustable motion security floodlight sensor. This motion sensor features a durable, high-impact, non-metallic sensor head. It is weather resistant and provides years of trouble-free service. This outdoor flood light motion sensor easily installs to one or more existing lights. 30 motion detection zones, the most of any brand. Turns lights on automatically when motion is detected; detects motion at 180 Degree and up to 70 ft. Adapts to most wall and eave mount applications. Convenient tool-free sensor head adjustment. Adjustable time and sensitivity settings. Power outage protection, saves energy by automatically resetting at dawn if lights are triggered by power interruption. Approximate coverage area of 7,600 square feet.

From the Manufacturer

180 Degree Replacement Motion Security Sensor Floodlight.

• Motion sensor detects motion 180° up to 70 ft
• Motion sensor turns lights ON automatically when motion is detected and OFF after a pre-selected time delay (4 or 12 minutes)
• Integral photo cell design prevents lights from turning ON with motion during daylight hours (auto modes)
• Maximum load of 300 Watts
• Available in bronze (MS180) and white (MS180W)

User questions & answers

Question:	can I install 2 . one on either end of a long driveway. 3 way capable
Answer:	These sensors will not work electrically like a 3 way switch. However, you can hook up more than one sensor to turn on a single light circuit. I have two sensors, one at the bottom of my entry stairs and one at the top. I wired them in parallel (black of both sensors get power from the same source, red from both sensors connect to the controlled light(s), and white of both sensors connected to a neutral. This does what I want. If I leave the house the upper sensor triggers and I have a lighted stairs. When I come home the bottom sensor triggers and I have a lighted stairs to the front door. As to timing, I set both sensors at the same time and sensitivity setting. Either sensor will bring on the light. Both senors need to be off to turn off the light. Perhaps this is what you meant by "3 way capable". Hope this helps - Ron
Question:	MS180W in photo is totally sprayed flat white, even lens and pipe. What does it actually look like
Answer:	it looks just like the picture, the lens is a cloudy white, and the rest of it is all white.
Question:	Where is the unit screwed in to? Thanks
Answer:	This is not intended to screw into a light socket as you seem to surmise. It is intended to be attached to a knockout hole in an electrical box (either indoor or outdoor). You will then attach its wires to power and the lights to be controlled within the box in accordance with the instructions in the package. If you are not comfortable with home wiring, then I suggest you have the unit installed by an electrician. Adjustment of these devices is tedious to ensure that detection of what you want to detect (presumably persons) is detected and what you do not want detected (leaves in the wind, animals, noise, etc.) is not detected. This involves orienting the fixture and adjusting the sensitivity; this is a two-person job with whatever ladder you need to reach the device as it is installed. You may find that you need more than one sensor to do the job; it's just not possible to have a reliable detection region that is wide and thin. And, it cannot detect around corners. Good luck.
Question:	Hi. The installation diagram does not exist. Only a bad figure in the manual. May I have a clear installation instructions or diagram, please
Answer:	I agree with you. I also did not find it very clear. My advice is to pay close attention to what to what is written not the diagram. It is very easy to install incorrectly otherwise. Also before you remove faulty sensor - not how the wires are attached and label them before removing. That way you can install replacement without instructions. Finally - new time delay switch is touchy. I would set it to middle position. Good luck.

Product features

EATON Lighting MS180 180 Degree Replacement Motion Security Floodlight Sensor

180° Motion sensor. Motion sensor turns lights ON automatically when motion is detected and OFF after a pre-selected time delay (4 or 12 minutes). Integral photo cell design prevents lights from turning ON with motion during daylight hours (auto modes). Power outage protection: saves energy by automatically resetting at dawn if lights are triggered by power interruption.

• Motion sensor detects motion 180° up to 70 ft.
• Maximum load of 300 Watts

Product description

Light automatically activates when motion is detected in a dark room - Stays OFF in a bright room. Detects motion up to 10Ft. 7 watt clear Incandescent bulb.

• Light automatically activates when motion is detected in a dark room - Stays OFF in a bright room
• Detects motion up to 10 Ft
• 7 Watt MAX clear replaceable Incandescent bulb included
• Polarized plug - Prevents shocks

User questions & answers

Question:	What is the bulb size? For replacements
Answer:	Hi, I have only had to replace my once, I have several of them. I used a candelabra bulb, there small and they work. I hope that helps.
Question:	could I replace bulb with E12 bulb
Answer:	From what I can tell an E12 is the size of the base. And yes that is the size of the bulb socket. But your limited to a bulb to just be a night light size bulb. Not enough room for the larger candle type bulbs.
Question:	Will the light turn off after 90 seconds
Answer:	Yes. The light does turn off after 30 or 45 seconds.
Question:	Can you change the turn off timer
Answer:	If you mean changing the time it stays on after activated, then no you can’t.

Product description

Here is the All-Pro 110 ° Motion sensor, 100-Watt halogen plug-in security floodlight. The motion sensor turns lights ON automatically when motion is detected and off after a pre-selected time delay. Integral photo cell design prevents light from turning on during daylight hours. The unit comes with a versatile plug-in design with 8 ft. extra-reach electrical cord. It is perfect for most indoor/outdoor wall mount applications.

From the Manufacturer

110 Degree 100W Portable Plug-in Motion Security Floodlight.

• Motion sensor detects motion 110° up to 40 ft.
• Versatile plug-in design with 8' extra-reach electrical cord
• Adjustable time and light sensitivity settings
• Manual override - allows use as standard floodlight
• Perfect for most indoor/outdoor wall mount applications

User questions & answers

Question:	Can I use a lower watt bulb on it, eg. 60 w
Answer:	Yep, that's what I'm using.
Question:	I just got this in the mail and it tells me that the bulb is included...I don't see it anywhere, am I missing something
Answer:	yes they can be mounted like on a ceiling. I have three mounted on the eaves at the corners of our house. You will have to adjust then angle of the lights and sensing unit. One is 10 years old, while I have had to replace both of the others.
Question:	Hi, where can we buy replacement bulb
Answer:	Since MS185W the install instructions state attach black and white wires, i would presume the red wire was not PRE assembled correctly. See step 4 of the assembly and wiringof motion detector MS180 for better explanation.https://secure.img1.wfrcdn.com/docresources/11219/1/13054.pdf . This is a guess.
Question:	i want to install this facing my orchard tree......woule leaves movements trigger it on
Answer:	The spray helps a lot. I take a lot of meds which cause dry mouth. When I'm chatting with friends my mouth gets very dry. I use this spray liberally annd it does help. I recommend it.

Product description

Enhance your home security with Precision Plus Doppler Radar. Doppler technology provides lateral plus to-and-away motion detection. This fixture projects a bright 1900 Lumens with 180° of protection up to 70 ft. range, so you can see potential threats from further away.

• Hardwired Floodlight featuring wall or eave-mount installation
• 180-degree motion detection with up to 70 ft. range
• Integrated LED produces 1900 lumens with 180-watt equivalence
• Fixture is built to last with maintenance-free energy efficient LEDs with 35,000 hours of life (equivalent to 32 years at 3 hours per day)
• 1900 Lumens provides strong brightness to cover large surrounding areas
• 5000K daylight color temperature influences alertness and awareness, ideal for outdoor security applications
• Integral dusk to dawn photocell sensor provides nighttime on/ daytime off to ensure efficient energy usage to save you money

User questions & answers

Question:	how many horsepower
Answer:	Just vacuum on and power tool switch
Question:	Can i use the 18v XRP or or 18v li-on batteries with DEWALT DCV581H
Answer:	Yes it does
Question:	Bought mainly for cordless car and house clean up but the small non-QR 20v batteries only last 5-7 minutes. Can it work longer on any battery
Answer:	It’s 9 to 10 feet. I don’t know how many amps it draws.
Question:	What is it's fluid capacity
Answer:	I believe they’re referring to a button on the unit that you can push to blow air through the filter to clean it.

Product description

The SL-4144-AZ features 150˚ motion detection up to 30 ft. away. The lantern has clear glass and is constructed of metal with a weather resistant finish. Uses 1 medium base incandescent bulb (100W Max - Not Included). Features include DualBrite 2-Level Lighting.

Motion-activated lights are convenient and energy efficient, but they can be a little bulky and awkward to look at-in the driveway is fine, but you wouldn't want to put one on your porch. Unless it's one of Heath Zenith's porch lights, that is. These products give you the best of both worlds, combining motion-activation and traditional lantern design.

The SL-4144 is a four-sided New-England style lantern that includes a hidden motion-sensing device. This device will detect movement in a 150-degree radius up to a distance of 30 feet. You can set the light timer to one, five, or ten minutes, and the sensor itself may be adjusted to give you more or less sensitivity (so it doesn't light up every time a car drives by). The weather-resistant antique bronze finish means it's going to look good for a while, too.

This model also features "Dual Brite" lighting, which means you can use it for low-level accent lighting in addition to the full-light effect you get with motion-activation. An included timer allows you to set low-light mode for three hours, six hours, or dusk to dawn (an automatic photocell deactivates the unit in daylight).

If you're looking to save a little money on outdoor lighting by installing a motion-detector, this is a great option that won't look out of place. Requires one medium-base bulb of up to 100 watts (not included).--Josh Dettweiler

What's in the Box

Lamp housing, motion detector

From the Manufacturer

The SL-4144-AZ-A features 150-Degree motion detection up to 30-Feet away. The lantern has clear glass and is constructed of metal with a weather resistant finish. Uses 1 medium base incandescent bulb (100-Watt max - not included). Features include DualBrite 2-Level lighting. Meets energy star guidelines.

• Up to 30Ft. Detection range
• Clear glass
• Finish: Antique Bronze
• Antique Bronze Metal Construction with Clear Glass
• Detects Motion Up To 30 ft. Away
• Uses 1 - 100W Max Medium Base Incandescent Bulb (not included)
• DualBrite 2-level lighting
• 2 year warranty

User questions & answers

Question:	Is it a motion detector or a dusk to dawn lamp post? Also, do you have any that are larger say twice the size
Answer:	Sorry, I don't know. I would imagine if you can get a bulb that fits, it wouldn't matter the wattage.
Question:	Can someone tell me the diameter of the mount/base of this lamp? Thank you
Answer:	Look again - it's in there. I've owned two of this particular model and they do in fact come with the bulb - or are supposed to. If I remember correctly the bulb is wrapped in a type of foam wrapper and then is packaged in a small block of styrofoam. I don't have the original packaging from either light otherwise I'd be able to tell you for sure. Sorry.
Question:	Can the sensor be turned or is it fixed straight ahead
Answer:	You should be able to go to any hardware store and buy a replacement bulb. I haven't had to buy any replacement bulbs, but I have other lights that take this kind of bulb and I just go to my local hardware store. Or go to one of the big box stores. Take the bulb with you and I am sure they can help you locating one..
Question:	led
Answer:	I have mine right underneath a huge tree and the leaves don't trigger it.

Product features

Heath Zenith 150 Degree Outdoor Motion-Sensing Lantern, Antique Bronze

The New England Carriage 150 Degree Outdoor Motion-Sensing Lantern features patented DualBrite 2-level lighting that provides soft accent lighting and full-power security lighting when motion is detected. The lamp has a metal housing with a weather-resistant antique bronze finish. It uses a standard 100-Watt light bulb (not included) and is UL listed.

Product description

Heathco Hz-5316-Wh Motion Snsr Replc W

Got a floodlight with a broken motion sensor or want to upgrade for greater detection range? The Heath Zenith SL-5316-WH-A gives you a 240-degree sensitivity zone, and the range is adjustable from 15 to 100 feet (the low range is convenient if you don't want your light going off every time a car drives by). It also features "Dual Brite" lighting, which means you can use it for low-level accent lighting in addition to the full-light effect you get with motion-activation. An included timer allows you to set low-light mode for three hours, six hours, or dusk to dawn (an automatic photocell deactivates the unit in daylight). You can also turn the light on and off at will via the manual override that mounts to an existing indoor switch. Requires 300 watt bulb. Ten-year warranty.--Josh Dettweiler

What's in the Box

Motion sensor, mounting kit

• Wide-angle motion sensor converts existing light into dusk-to-dawn security light
• 240-degree motion sensor, up to 100 feet detection range and adjustable sensitivity
• 2-level lighting: timed, low-level accent light or dual bright feature, with a built-in timer.
• Heavy die-cast metal housing, easy to install, works with 300-watt bulb (sold separately)
• 2-year limited warranty

User questions & answers

Question:	Will this motion detector sensor work with a hyperikon led wall pack, 5000k, 50 watts shown here? https://www.amazon.com/gp/product/b07g4lkkvd/ref=p
Answer:	I have no idea. I hooked it up to my lights and it works. No problems.
Question:	can this motion detector be wired to a switched circuit to be operated with a switch to turn on and off as well
Answer:	I don't know why it couldn't be. I have my motion detector on a switched circuit. I rarely turn it off, but occasionally I do.
Question:	Does this sensor have a dusk to dawn setting
Answer:	Yes, in fact it switches to a low- light mode at dusk or you can set to turn off totally at three hours, six hours, or to stay on low light dusk to dawn.
Question:	Will it work with CFL and/or LED lights
Answer:	I can confirm this works with at least one type of dimmable LED bulbs: https://www.amazon.com/gp/product/B00WNSE0BC/ref=oh_aui_detailpage_o04_s00?ie=UTF8&psc=1

Product features

Heath Zenith 240 Degree Motion Sensor Replacement, White

The 240° Universal Replacement Sensor has a white weather resistant housing. It has an adjustable range of up to 100 ft. with a 240° range of motion detection. It has a selectable light timer and patented DualBrite 2-level lighting technology for energy efficiency.

• 【Motion Sensor Light】Built-in PIR infrared motion detector, this LED ceiling light instantly turns on when it detects motion from up to 18ft away under dark ambient. And it turns off automatically after 20 seconds when no motion detected, conserving battery life
• 【Two Modes Available】There is a switch nearby the motion sensor, slide the switch to turn on/shut off the photocell sensor. When it is ON, the light will keep off under daytime and only could be motivated on at night; when it is OFF, the light could be motivated on all day long
• 【Battery Powered Motion Sensing Light】Powered by 4 * D-cell alkaline batteries( Battery Not Included), it could light up for 180spft area. The battery could provide up to 6 months of lighting with an average use of 20 activations per day
• 【Super Bright Hallway Light】Built-in 80 pcs bright & long life-span SMD2835 LED. It diffuses well in all directions with up to 300 lumens brightness to make sure you never stumble in the dark, Protect your lover and children from darkness and fear around the home
• 【Easy to Install & Wide Application】Wire no need, quickly and easily install it in less than 5 minutes. Fits for your bedroom, bathroom, stairs, corridor, workshop, basement, garage entrances, roof, entryway. Don't leave lights on needlessly running up the electric bill anymore

Product features

Battery Powered Night Light:

Built-in PIR infrared motion detector, this LED ceiling light instantly turns on when it detects motion from up to 18ft away under dark ambient.

And it turns off automatically after 20 seconds when no motion detected, conserving battery life.

Built-in 80 pcs bright & long life-span SMD2835 LED.

It diffuses well in all directions with up to 300 lumens brightness to make sure you never stumble in the dark.

Protect your lover and children from darkness and fear around the home

Two Modes Available:

There is a switch nearby the motion sensor, slide the switch to turn on/shut off the photocell sensor.

When it is ON, the light will keep off under daytime and only could be motivated on at night.

When it is OFF, the light could be motivated on all day long.

Specification:

1.Sensitivity: Around 18ft Distance

2. Sensor Range: About 120 Degrees

3. LED Qty: 80 LEDS

4. Light Color: Daylight

5. Delay Time: 20s

6. LED Life: 50,000 Hours

7. Size:7.2 *7.2 *1.81 inch/18.3*18.3*4.6 cm.

8. Material: ABS +LED

9. Weight: 411g

10. Battery Required: 4 pcs D-cell alkaline batteries (battery not included)

Bathroom

Wardrobe Room

Stairway