13 best upholstery staplers

Product description

Easy to Install and Use - Manual staple gun is made of thick carbon steel，adopting the principle of spring spring-back impact, long-lasting durability. Quick-Jam-Clear - When the nail of the staple gun is stuck, you can pull down the binding switch and remove the stuck nails to ensure the nail gun works properly. Power Adjustment - Use the knob of the power staple gun to adjust the pressure to fit the thickness of the material you are using, which will make your decoration work easier. 3-Way Staples - D-type, U-type, T-type 3-in-1 manual staples are ideal for repair, decoration and fastening to meet your different renovation needs. 100% Warranty - If you have any problems during using our product. Contact our Professional after-service team via email or phone calls. we will be in touch within 24 hours.

• ★3-in-1 Staple Gun Kit - D-shaped, U-shaped, T-shaped, three types of manual staples are ideal for outdoor and indoor repair, decoration and fastening to meet your different renovation needs
• ★Quick-Jam-Clear - When the staple gun is stuck, the binding switch can be pulled down. Matching stapler remover can help clear the jammed staples quickly, Card slot reset to continue using
• ★Easy to Operate - The gun has an ergonomic hand slot that was designed to minimize the pain your hands face when you spend time stapling, adopting the principle of spring spring-back impact, long-lasting durability
• ★Power Adjustment - Adjust the pressure by the screw button on the top of the heavy gun, to fit the thickness of the material you are using, which will make your upholstery work easier
• ★Premium Service - If you have any problem during using our product. Contact our Professional after-service team via email. Our after-sale Team will get in touch with you and timely solve your problems

User questions & answers

Question:	Can I buy with this item extra staples u shapes
Answer:	You’ll need to buy them separately
Question:	Can I use this staple gun on a carpet
Answer:	Sure.... if you can get it staple.... it took two of us to squeeze the stapler..... would not buy!!!
Question:	Can it easily staple wood
Answer:	It works well to attach materials to wood. Change the tension to make the staple go into harder wood.
Question:	The drive channel is extremely hard to pull down to clear jams. Is this a defect
Answer:	I found the entire stapler defective (required too much pressure to squeeze out a staple that wouldn’t even go thru paper). I returned it.

• Versatile Fastening Tool - YEAHOME 4-in-1 Staple Gun accepts D-shaped, U-shaped, T-shaped, and Pin Staples. This kit comes with 1000pcs of each " D-Type, " T-Type, " U-Type , and " Pin Brad Nails for a wide variety of applications: general DIY repairs, crafting, decorating, upholstery projects, roofing, and more.
• Heavy-Duty Staple Gun - Features all chromed-steel construction and a chrome finish to provide strength and durability, and make the staple gun rust-proof. YEAHOME staple guns are assembled toughly so that it can handle the tough load and last as long as you need it!
• Power Adjustment - Change the pressure (between low to high) with the screw lever as per the requirement of your projects, to staple in soft as well as hard materials, make your projects easier.
• Easy to Use - Steel handle with over-molded grip to help provide comfortable usage and easy operation. Bottom load design and a steel magazine for quick and easy loading.
• GUARANTEE from YEAHOME: Comes with a user manual, if it can not resolve the problem you met, please contact with us, there is always someone available to help you around the clock. We offer 180 Days Money Back and Replacement Guarantee warranty and a full money-back and replacement guarantee.

User questions & answers

Question:	Need to staple material to a 3" post will this be strong enough
Answer:	At this time, we do not carry hanging replacement canopies in 11ft. Thanks Formosa Covers
Question:	Does this work on concrete walls
Answer:	Replacement canopy only
Question:	Can this be used on strecther bars for canvases? Will it hold
Answer:	It is the cover only, no part of the pole is included.
Question:	Can i get more staples for this
Answer:	Ours doesn't have the solar lights.

Product features

The Most Efficient 4 IN 1 Manual Staple Gun with 4000 Staples

Features an easy squeeze and slip resistant handle, and Jam-resistant mechanism magazine make your stapling work from loading to adjusting the tension super easy and relax.

GS Certified

Compared with the traditional pneumatic nail gun, its operation is more simple and convenient

Fulfill All Your Needs

Fixing material, Packing, Bookbinding, Decoration, Carpentry, Furniture, Doors and Windows, Wood, Billboards, House Wrap, Wiring, Flooring, Upholstery, Diversion, and many more things.

All-Steel Magazine

The magazine made of chrome steel with quick jam clearing system to save your time and frustration and ensure better penetration.

Quick View Window

Designed with a small window for simplifying staple identification. You can easily check the type and number of nails/staples you are using.

Handle Lock

Helps you to store the gun safely and prevent accidental firing. Please keep the staple gun powered down with the trigger locked when it’s not in use.

Upholster Projects

Fasten Material

Wiring

The Do’s and Don’ts of Staple Guns

Do's:

1. Please read the user manual completely and read all safety oriented labels before using this freshly bought staple gun. It is necessary for you need to learn how to properly use it to avoid any mishaps.

2. Always use safety glasses when stapling to avoid wounding yourself with splinters during stapling.

3. Always check what you are stapling as you don’t want to hit any other objects.

Don'ts:

1. Never leave the staple gun unattended. Make sure to always engage the safety lock whenever you are not using it.

2. Never point the staple gun towards anyone, including yourself, even if it is not loaded. Keep your finger away from the trigger when you do not need to staple to avoid accidentally firing the staple gun.

3. Never leave your staple gun at the reach of children.

• 3-in-1 Application：Extremely practical multi-functional 3-in-1 heavy duty staple gun able to fasten D-staple，U-staple and T-staple.
• Complete Accessories: Our manual staple gun include 2400 PCS staples(D-type*800, U-type*800, T-type*800).
• Quickly Clear: When the nail of the staple gun is stuck, you can pull down the metal drive channel and remove the stuck nails to ensure the nail gun works properly.
• Convenient Installation And Operation: Our staple gun is made of thick carbon steel，adopting the principle of spring-back impact, own long service life. And less use steps make it easy to install and operate.Also suitable for teenagers, women,and the elderly.
• Multiple Usage: The staple gun can use for upholstery, material repair, carpentry, decoration, furniture and DIY, which can satisfy all your necessary.

User questions & answers

Question:	What kind of material is the surface made of and is it susceptible to rust
Answer:	Mine doesn’t work....at all
Question:	does it come with a staple remover
Answer:	No, I use it for upholstery work and it does fine enough with softer woods
Question:	What is the length range of these three functional staples
Answer:	should be ok if it's not heavy duty. the normal use should be fine
Question:	How deep does it staple into the wood
Answer:	Hi dear, You could buy more staples that could be used for this staple gun. We do not selle any staples alone. Please buy them from other sellers. The staples mentioned below are COMPATIBLE with our staple gun. D-type: Rapid 140/Arrow T50 U-type: Arrow T18/Rapid 28/Rocatix 8 T-type: ESCO 300/Novus J/Rocatix 8 Thank you so much for your interest. Leticia

Product features

3 in 1 Manual Nail Gun

Our multi-functional 3 in 1 staple gun is able to fasten heavy-duty D-staple, U-staple and T-staple. And this manual nail gun include D-type staples*800, U-type staples*800, T-type staples *800,total 2400 PCS staples, which can satisfy all needs of the customers.

• Before use, make sure the strength adjustment bolt was already be tightened. If it came loose, be sure to tighten the bolt, or the loose bolt may pop out.
• Comes with 1000pcs D-type, 800pcs U-type and 800pcs T-type brad nails to meet your different needs
• Rubber grip and convenience handle lock for comfort and safe. Solid carrying case keep everything in place
• When the staple gun is stuck, just pull down the metal drive channel and remove the stuck nails to ensure the nail gun works again
• Thick carbon steel construction for durability, multi-purpose allows easily insertion of D-type, U-type, T-type brad nails .

User questions & answers

Question:	How do you load the brad nails
Answer:	Pull the bottom silver piece off, there’s two tabs that stick out on either side. Load the brads from the front.
Question:	Staples included
Answer:	About 100 staples were included in the staple gun I bought.
Question:	What’s difference between the various types of staples
Answer:	This one will shoot 2-3 staples then u have to pull the slide bar out. Then sometimes u shoot in the air numerous times and get nothing. Its a constant headache. You will never complete what you're working on. Every 3 it hangs up or stop. Besides, I threw this piece of crap in the trash. I take my loss. My neighbor who has construction experience told me it was a piece of junk.
Question:	What size replacement Staples do you use for rexbeti re-taped of a gun
Answer:	This stapler takes only Rexbeti staples which is prohibitively expensive. I wish I had known this, would have been better off with Arrow brand, you get staples of different heights that you can buy from anyone.

Product features

Step 1

Remove the loading lever

Step 2

Hold the switch with your thumb and pull down the metal drive channel

Step 3

Check the drive channel, look for the jammed staples and remove them, then check the drive channel for damage

Step 4

The drive channel is not abnormal, then restore the drive channel and continue to use

GS quality certification

Compared with the traditional pneumatic nail gun, its operation is more simple and convenient

Staple remover

Rubbery handle offers perfect grip, the remover helps you quick removing the wrong nails

2600-Piece Staples

1000pc D-Type staples / 800pc U-Type staples / 800pc T-Type staples

Product description

Remember when you had a reliable stapler? Fasten thin materials tightly and securely with the WEN 20-Gauge Pneumatic Stapler. Shoot 3/8-inch crown staples (T50) ranging from 1/4 to 9/16 inches in length. Simply attach the compressor of your choice to the 1/4-inch NPT air inlet, and get to stapling. With a rubber-gripped handle and a lightweight aluminum body, you’ll have maximum comfort during long days on the job site. The spacious magazine holds up to 100 nails while the magazine’s side window helps you know when your staple supply is running low. The 360-degree adjustable exhaust rotates any direction to direct the air output away from the user. The WEN Stapler operates at 70 to 100 PSI, using 0.28 SCFM of air at 90 PSI. The compact design is perfect for stapling wood and upholstery in even the tightest corners. And because it’s a WEN product, your stapler comes backed by a two-year warranty and a friendly customer phone line. Remember when you could finish the job without a jam? Remember WEN.

• Perfect for upholstery, woodworking, trim work, vinyl installation and more
• Shoot 3/8-inch crown staples ranging from 1/4 to 9/16 inches in length
• Features an adjustable 360-degree air exhaust and a 1/4 inch NPT air inlet fitting
• Compact 1.8-pound design features an extended nose for tight areas and corners
• Spacious magazine holds up to 100 fasteners at a time

User questions & answers

Question:	Will this tool accept 18 gauge staples without harm? I bought this because it said T50 staples, but they seen to be 18 gauge
Answer:	I got KeLDE 5000 piece staple kit from Amazon. They worked, but came loose in the bag, which seemed strange. I hope this helps.
Question:	depth adjustment how to
Answer:	Not sure what you mean
Question:	What brand of staples would this gun need
Answer:	Yes. There’s socket for slow and fast.
Question:	Are there any reviews for the wen 61705 20-gauge t50 product which is actually listed on the page
Answer:	No, it doesn't have any cartridges inside. It doesn't have filter also

Product description

Aeccn brings you professional tools for building & construction. This purpose stapling gun is great for securing insulation plastic sheeting, carpets, and other fastening applications. All steel casing and mechanics. are professional products as well as devoted renovation, repair, DIY and hobby work at home. High quality products you can rely on. Material: Carbon steel Product Weight: 1.21lb Product Size: 7.48 x 6.38 x 1.1 inches Package Include: 1 x Staple Gun 2000 x Door-type Staples 500 x U-type Staples 500 x T-type Staples NOTE: * Never aim the staple gun at any person, child or animal. * Keep there is no staples in the gun, when you don’t use it. * Please put the staple gun where children can't get them.

• [MULTI-PURPOSE 3 IN 1 STAPLE GUN KIT] Special binding groove allows easily insertion of Door-type, U-shaped, T-type three-in-one manual staples are ideal for repair, decoration and fastening to meet your various tacking needs.
• [RUGGED AND DURABLE] It adopts 5.86mm large all-steel fixed column, high-strength chrome steel body, surface plating treatment, durable and not easy to damage, no rust.
• [INCLUDED 3 DIFFERENT NAILS] Comes with 2000pcs Door-type, 500pcs U-type, 500pcs T-type staples to meet your different needs. (D-Type 11x8 mm ; U-Type 6x12 mm ; T-Type 2x10 mm) Ideal for repairing, decoration and fastening.
• [EASILY AND SECURELY] According to the ergonomic design, the hand feels more fit, more comfortable and non-slip, and more labor-saving. Use the depth adjustment knob on the top of the brad nail gun to fit the thickness of the material you are using, which will make your upholstery work easier.
• [100% LIFETIME GUARANTEE] - Unlike other products, we believe in the quality of our products.if you are not 100% satisfied just contact us to arrange a return and we will offer you a full refund or exchange!No risk ,add to cart now.

User questions & answers

Question:	Can I use this to fix bamboo screen to fence
Answer:	This depends on how thick your bamboo screen is! This stapler is quite forceful and will easily fire into all but the hardest of woods, if the bamboo is more than .5cm thick, it would be best to purchase the longest staples, this should overcome any problems. I have had this stapler for about a month now and I find it endlessly useful. I hope this answers your question.
Question:	Does it work well for upholstery
Answer:	For upholstery it would depend on the thickness of the material and the density of the wood that you were using. The 14 mm staple is the max length available, and it won't fully set the staple if you are into a hard wood.
Question:	How to remove stuck staples
Answer:	If not remove the sprung loading clip and all loose staples .Use one hand hold the tool and with the other pull the s/s wings back a little and the magazine will drop. you may need long nose pliars / pliars to remove staple .
Question:	Can this be used to staple / nail into wood & brick
Answer:	I know it nails into wood, but not sure about brick.

Product features

Step 1

• Remove the loading lever

Step 2

• Hold the switch with your thumb and pull down the metal drive channel

Step 3

• Check the drive channel, look for the jammed staples and remove them, then check the drive channel for damage

Step 4

• The drive channel is not abnormal, then restore the drive channel and continue to use

Outdoor repair

• What if there is a broken board on your garden fence?
• What if your pet's nest is broken?
• With AECCN staple gun, a tool can solve your troubles, you won't waste time preparing too many tools, a product that can solve your project DIY.

Patching tableware

• Whether you need to mend your chair, party DIY decorations, or install roof panels and signage, you can use AECCN nail guns to design your project without any scruples. Our products use ergonomic software. The plastic handshake area improves your work efficiency and reduces the loss of time.

Upholstery

• The product that lets you say goodbye to hammers, screws, glues, pushpins. With our products, you can quickly and easily bond the products which you want DIY. Our products are manual and you can enjoy yourself project design in anywhere

Product description

Porter-Cable US58 1/4-Inch to 5/8-Inch 22-Gauge C-Crown Upholstery Stapler. Driver guide moves back with magazine, allowing jams to be easily cleared when magazine is open. Convenient bottom-load magazine holds 185 staples.

The Porter-Cable US58 1/4-Inch to 5/8-Inch, 22-Gauge C-Crown Upholstery Stapler is an easy to use pneumatic stapler with plenty of useful features. It uses standard Senco C Type 22-gauge, 3/8-inch crown staples to get the job done right, and it includes a 1-inch nose extension for those tough to reach areas. The high-capacity bottom-load magazine handles 185 staples, and the driver guide moves back to easily clear jams from the magazine. The US58 stapler requires 70-120 PSI air pressure, so it will work with most air compressors.

• Uses 22 Ga. 3/8" crown staples from 1/4" to 5/8" long
• Small and lightweight for ease of operation
• 1" nose extension for limited clearance fastening
• Steel top cap for durability
• Rear exhaust port channels air and tool oil/condensation away from user

User questions & answers

Question:	Will this stapler work with a European air compressor? Are the hose fittings different sizes in Europe
Answer:	Porter Cable Corp is in Jackson, TN. However my upholstery stapler was made in Taiwan. You want this changed. Contact your congessman or women and tell them if they want to be relected change the laws that give Corporations insentative to move their manufacturing to other countries.
Question:	Cannot load porter cable heavy duty 3/8 crown, 3/8“ 10 mm staples in model us 58 upholstery stapler
Answer:	We are using a Craftsman Compressor (oil lubed) with a 10 gallon tank 1 hp that delivers 135 psi. it's upright and on wheels, small foot print. it is a bit noisy.
Question:	Where is this stapler manufactured
Answer:	No, this staple gun can not work on aluminum.
Question:	what brand/kind/size of electric air compressor is used with this
Answer:	Yes, this Electric Staple Gun Suitable Staples(T50 1/4”, 5/16″, 3/8″, 1/2″, 9/16″), and it comes with T50 staples(5/16″, 3/8″, 1/2″).

Product description

This 3PLUS H7116SP is a 22-gauge Pneumatic Upholstery Stapler that will drive staples from 1/4" - 5/8" in length. It accepts any brand of 22 gauge 3/8" (9mm) crown staples that are most comparable with 71 series. The convenient bottom load magazine allows you to re-load quickly and work more efficiently. Features include a rubber grip for comfort, 1/4" male air plug, a magazine capacity of 180 staples, and a 360° adjustable exhaust. This 3PLUS stapler requires 60-100 PSI air pressure, so it will work with most air compressors.

• Uses standard 22 ga. 3/8-inch (9mm) crown staples from 1/4" to 5/8" in length
• Small and lightweight for ease of operation
• Features comfortable grip and a 360° adjustable exhaust
• Easy bottom loading magazine and quick-clear jam release
• Ideal for upholstering, cabinet assembly, fabric applications, light wood assembly, silk screen assembly, screen door replace, automobile interior. Air Compressor needed but not included.

User questions & answers

Question:	I’m new at this and totally confused. i’m carefully reading the instructions but 1. is the air hose built in or do i buy one. i’ve gone on youtube
Answer:	No air hose. Also this is NOT compatible with the T-50 Arrow staples. If you want Arrow T50 staple compatible buy a actual Arrow brand stapler
Question:	How long is this staplers nose
Answer:	Its about .87 inch.
Question:	DOes this have a saftey mechanism
Answer:	Sort of, it has a steel toggle that I wouldn't trust that much. The stapler works well so far though, I've only done one chair though.
Question:	Will this stapler handle the shorter 71 series C crown staples? 5/32" length
Answer:	71 series will work. AKA #7 Empire. I have used 5/32 to 9/16 with no problems. This is a great staple gun. I have been using it full time in my upholstery shop for about 6 months with out problem.

Product description

Please note this tool needs an air compressor to operate. An air compressor does not come with the tool/kit. This user friendly and lightweight air powered stapler is a must for the DIY homeowner. You will be able to finish your projects or repairs in half the time and have fun doing it. In this kit you will receive 1250 staples of each different length: 1/4", 5/16", 3/8", 1/2" And 9/16". These are Surebonder #4 standard size heavy duty staples, same as Arrow T50 type staples. The kit also includes a high impact carrying case, An allen wrench, small bottle of tool oil and easy to follow operating instructions. The applications are endless-here are a few; upholstery, insulation, screen repair, woodworking projects, fencing repairs. Standard features include: safety mechanism that prevents accidental firing, an adjustable Air exhaust, a rubber cushioned handle for comfort, A Quick release magazine for easy staple loading, staple viewer and 1/4" Quick release connector. (Air compressor needed but not included). Use an air hose that will withstand at least 150 psi, OR 150% of the maximum pressure of the compressor. Never connect this tool to compressed air if the pressure could exceed 200 psi, as the stapler could burst.

• Uses Surebonder #4 staples 55014, 55516, 55038, 55012, 88516, 88038 & 88012
• Air compressor is needed to operate tool - Does Not Come With Tool
• Kit: carrying case, 6250 staples in 5 different lengths, Allen wrench, bottle of tool oil, Staple gun & Operating instructions
• Applications: cabinet backs, carpet padding, screen door repair, small furniture projects
• Our customer service department is available for troubleshooting

User questions & answers

Question:	Can you bump staple with it
Answer:	Not sure about paselode nails. The Surebonder 16-Gauge Straight Finish Nail Gun is an indispensable tool when working on casing, cabinets, trim, furniture repair, baseboards, chair rails and more. The Model 9755 features a safety mechanism that prevents accidental firing, quick-release nosepiece for fast jam clearing and adjustable air exhaust and adjustable depth drive, plus a high-impact carry case.SPECIFICATIONSDIMENSIONSMaximum fastener size (in.) 2.5 Product Depth (in.) 2.95 Minimum Fastener Size 1-1/4 in Product Height (in.) 10.63 Minimum fastener size (in.) 1.25 Product Width (in.) 12.6 DETAILSAir Tool Type Air Nailer Maximum Fastener Size 2-1/2 in Compressor/Air Tool Features Adjustable Exhaust Port,Fastener Depth Control Nail Gauge 16 Cordless/Corded Cordless Nailgun Angle 0 Energy Type Air Reconditioned No Fasteners included No Returnable 90-Day Included No additional components or accessories are included Tools Product Type Air Tool Loading type Strip Drives 1-1/4 in. through 2.5 in. 16-Gauge straight finish nailsSafety mechanism prevents accidental firingAdjustable air exhaust and depth controlQuick loading magazine and carrying case included
Question:	Will it shoot staples thru plastic on atv seat
Answer:	You can have them engrave anything you want. We had ours made as a mother's ring with the two boys names on either side and 'my boys' on the inside.
Question:	hi is this a 20 guage staple gun
Answer:	Get started by choosing ring size, then clicking "See All Buying Options" and then "Customize Now"
Question:	Is this to strong to staple window screen to plastic lattice
Answer:	No. You would have to likely run the ring over with a car and break the double layers of rhodium before exposing the pure silver on the inside. The rhodium seals it all in to protect the silver so that it does not turn colors, while also providing the long lasting high shine. In additional we include a free polishing cloth which will buff out any surface scratches you get if wearing it 24/7 on active hands.

Product features

Heavy Duty but Yet Lightweight and Utilitarian

The Surebonder 9600AK Pneumatic Heavy Duty Standard T-50 Type Stapler Kit gives you carrying case, 6250 staples in 5 different lengths, Allen wrench, bottle of tool oil and a staple gun. This lightweight power tool can be used to finish your projects or repairs in half the time.

Easy to Use

This tool by Surebonder can be used in various applications around home such as upholstery, insulation, screen repair, woodworking projects, fencing and repairs. This tool is also extremely safe to be used as it comes with a few safety mechanisms that prevent accidental firing, including an adjustable air exhaust, a rubber cushioned handle for comfort, a quick release magazine for easy staple loading, staple viewer and much more.

Product description

One of the top rated pneumatic staplers in the market and is ranked one of the Top 9 Upholstery Staplers in 2016. The applications are endless and we're sure you will add to the list once you realize the ease of the staple gun. The gun is equipped with a safety mechanism, adjustable air exhaust, a rubber cushioned handle for comfort, a quick release magazine for easy staple loading and a 1/4 In. male quick release connector. Uses standard staples in 1/4 In. to 9/16 In. length. Included with the tool are step by step instructions, an allan wrench, small bottle of tool oil and a high impact carrying case.

The Surebonder 9600 Pneumatic Fine Wire Staple Gun helps you get a wide variety of jobs done quickly and professionally. With a quick-release magazine that's incredibly easy to refill, this high-speed heavy-duty staple gun can handle everything from tough roofing projects to at-home upholstery repair.

• Air-operated stapler
• Uses Surebonder #4 staples or Arrow T50 type staples
• Highly recommended for upholstery projects
• Adjustable air exhaust
• Applications include but not limited to upholstery, cabinet backs, picture frames, light trim, carpet padding, small furniture repairs, house wrap, woodworking projects

User questions & answers

Question:	Can this nail gun go thru a car armrest to fix
Answer:	no! ive had this rung for almost a year now, i bever take it off. i even shower eith it on! and it had never once turned my finger
Question:	Does it have a safety switch
Answer:	I found a cheap and beautiful jewelry website 【pickpandora.com】.I have bought 7, the quality is good, and the logistics is very fast! The price is very cheap.
Question:	Would this be a good stapler to use for re-upholstery furniture
Answer:	These are crystal rings. The stones are not genuine stones. They are crystal. No it is not a real emerald.
Question:	Do I need an air compressor to operate this staple gun
Answer:	No necesita talla. Es ajustable abierto one size fits a casi todas.

• Easy to Install and Use - Manual staple gun is made of thick carbon steel，adopting the principle of spring spring-back impact, long-lasting durability.
• Quick-Jam-Clear - When the nail of the staple gun is stuck, you can pull down the binding switch and remove the stuck nails to ensure the nail gun works properly.
• Power Adjustment - Use the knob of the power staple gun to adjust the pressure to fit the thickness of the material you are using, which will make your decoration work easier.
• 3-Way Staples - D-type, U-type, T-type 3-in-1 manual staples are ideal for repair, decoration and fastening to meet your different renovation needs.
• Premium Service - If you have any problems during using our product. Contact our Professional after-service team via email. Topec Direct after-sale Team will get in touch with you and timely solve your problems

User questions & answers

Question:	Will this gun also work with t-18, t-25, & t-50 staples
Answer:	Didn't work with anything
Question:	How do I replace the spring that goes under the tension screw at top of the stapler
Answer:	It is warranted send it back if you still have the papers
Question:	What is the depth of these staples or how deep do they go into the wood? Will it staple through a thin plywood to attach to wood surface
Answer:	The staple depth is about a half inch depending on the staples used and hardness of the surface. Pine boards - the staples sink right in. Oak boards - not so much. For the job you are describing - you might switch from staples to brads (like a finishing nail). Those should do the job you are looking for.
Question:	Will it staple into drywall
Answer:	Dear customer: I am sorry that I am afraid that this gun can't be used it. Because it is mainly used for wood and plastic-like materials. The strength of the stale gun is limited. We recommend that you buy a more powerful product. Thank you for your interest in our products.

Product features

Step1:

Remove the loading rod

Step2:

Hold the switch and pull down the metal drive channel

Step3:

Check the jammed staple in the drive channel and remove it

Step4:

After finishing and then restore the drive channel

• Important!! Before use, please make sure the strength adjustment bolt was tightened already. If the bolt was loose, please tighten it before use, or the bolt may pop out. If the bolt thread is broken, please stop using it!
• Thick steel construction for durability, heavy duty 3 in 1 multi-purpose staple gun allows easily insertion of D-type, U-type, T-type staples
• Comes with 1000pcs D-type, 800pcs U-type, 800pcs T-type staples and 1 piece staple remover to meet your different needs
• Strong grip and long handle offers comfort and safe
• When the staple gun is stuck, just pull down the metal drive channel and remove the stuck nails to ensure the nail gun works again

User questions & answers

Question:	What kind of staples work on coax cable
Answer:	If you have steady hands you can use this staple gun, the wider staples will work...but take your time and make sure you see that both ends are clear if the cable ... I used it for a flat, wide 50ft usb cord
Question:	Is it cordless
Answer:	Its Not Electric. It doesn't require electricity. There are no cords.
Question:	Can this gun use T 50 staples
Answer:	Yes. In the correct size.
Question:	Does anyone know if these staples are rust proof
Answer:	I don't think so

Product features

Step 1

Remove the loading lever

Step 2

Hold the switch and open the metal drive channel

Step 3

Check the drive channel, remove the jammed staples, then check the drive channel for damage

Step 4

The drive channel is not abnormal, then restore the drive channel and continue to use

Product description

ValueMax Staple Gun with 3000 Staples, Upholstery Stapler for Furniture, Carpet, Carpentry, Wood, DIY, Wire, Decoration, Craft, Fixing Material

• 3-IN-1 STAPLE GUN - Door Type, U-Type, and Brad Nails 3-in-1 manual staples make the staple gun more practical and versatile, suited for various stapling purposes like for upholstery, crafting and other decorative tasks (whether you're an at-home do-it-yourselfer or an on-the-job pro.) that require both a professional finish.
• WHAT YOU GET- You will get a complete kit, including three different types of 5/16" Heavy Duty Door Type (T50), 1/2" U-Type, and 5/8" Brad Nails and comes with 1000 staples in each size. This kit will become an indispensable assistant in your family. A good kit is half done.
• COMFORTABLE COMPACT HANDLE- The light-weight body with a rubber ergonomic hand slot that was designed to minimize the pain during stapling and to reduce discomfort when incessant work.
• CONVENIENT LOADING MAGAZINE- Just press the release latch and load rod, the staple gun can help you to finish the work. Strength setting knob makes the adjustment of the depth of the staples easier, besides, it‘s desirable for storage in your toolbox, drawer, and tote bag, etc. This item surely will satisfy your indoor and outdoor work.
• DURABLE & FASHIONABLE DESIGN- All carbon steel construction and sturdy ABS handle will extended service life, and unnecessarily spend more money on another one. The eye-catching orange color will light up your gloomy workshop. Our product has passed REACH standards and has a handle lock to ensure safe storage and avoid child accidental injury. (Be sure staple gun is unloaded, hold handle down and engage handle lock.)

User questions & answers

Question:	Does yhis syapler work woth Swinglinr staples
Answer:	Dear friend, This stapler dose not require a specific brand of staples, and it fit with staples of 5/16" heavy duty door type (T50), 1/2" U-Type, and 5/8" brad nails. Hope this helps Kaya Depot Service Team
Question:	Will this drive 9/16 carpet staples
Answer:	Dear friend, Yes, the gun will work with 9/16 carpet staples. Hope this helps Kaya Depot
Question:	Will this gun work with wooden picture frames to hold the glass and the picture in the frame
Answer:	Dear friend, Yes, the gun will work with wooden picture frames. Hope this helps Kaya Depot

Product features

All Carbon Steel Construction

Avoid unnecessarily rust and keep a long lifetime.

Versatile Function With only 20.5 oz

This is ideal for crafting and other decorative tasks(whether you're an at-home do-it-yourself or an on-the-job pro.) that require both a professional finish and solid hold.

Adjustable Driving Force and Quick Jam

Make every staple count.

Easy to solve problem

When the nail of the staple gun is stuck, just pull down the metal drive channel and remove the stuck nails to ensure the nail gun works properly.

Comfortable rubber handle

The light-weight body with a rubber ergonomic hand slot that was designed to minimize the pain during stapling and to reduce discomfort when incessant work.

Full carbon steel construction

All carbon steel construction and sturdy ABS handle will extended service life, and unnecessarily spend more money on another one.

YOUR BEST TOOL ASSISTANTS