10 best audio power conditioners

Product description

15 foot power cord

• 15 foot power cord
• Illuminated ON/OFF switch
• Circuit breaker
• 6-outlet block
• EMI/RFI noise attenuation
• Heavy-duty metal construction
• Illuminated on/off switch
• Circuit breaker

User questions & answers

Question:	what is the let through rating on this surge protector
Answer:	Electrical Rating: 15A, 1800 Watt; Voltage protection rating L-N 400V, L-G 400V, N-G 400V. Type 3 SPD. I like it because of the extra long cord!
Question:	Anyone know what amount of current will pop the breaker on this? I assume 15 amps can't seem to confirm that
Answer:	I have tested it with a 600 Watts Oster Blender and a Bosch driller at the same time, because I had to cut the power plug, for use a Neutrik NAC3FC-HC PowerCon, and it doesn't pop, or be hot, It is made to be reliable so it was made like a main power strip, I also connect it a 1600w vacuum cleaner and not a problem
Question:	What are it's electronic specs (i.e. clamping voltage, energy dissipation, and response time)? I'm looking for something for musical equipment
Answer:	Clamping Voltage = 400V. Surge Rating = 540 joules. Response Time = n/a. (Strangely, the response time is not available on the product website. I don't know if it means that it's a problem.) I would look elsewhere. There are a lot of other surge protectors that sell for less and provide better protection. It has a normal clamping voltage but its surge rating is low. So, it's going to stop working much earlier than other surge protectors. And, it's not like this really smooths out the line noise as it filters out only 20db (which is much lower than other devices). Frankly, I don't know why people would buy this, especially at this price ($30) and why it has a high rating. I guess the unit looks sturdy and looks like a heavy duty piece of equipment but it really isn't. The company is tricking you.
Question:	Is this a surge protector or just a power strip? Not used to buying something without a Joules rating. Help! Need for my whole TV setup
Answer:	It provides 540 Joules protection as well as EMI and RFI protection.. Furman is one of the best names in power conditioning for MUSICAL equipment. That should definitely be considered. I’ve used this brand for decades with zero problems. I’m currently using an M8lx conditioner and one of these branching off of it for added protection of a Gibson guitar/Marshall amp setup with numerous add-on equipment (pedals/PA amps etc.)

Product description

Clean electricity to improve the performance of your audio-video system.



The electricity network in our homes or workplaces is exposed to different interferences for instance electromagnetic interference (EMI) generated by appliances connected to the same network (refrigerators, air conditioners, computers etc.). These interferences are not only produced inside your house or office but by all appliances in your building or even outside it and can differ on the time of day or week when the traffic on the electrical network changes. All these interferences which we call noises can get into your AC power and interfere with your system. This “dirty” electricity can have a negative effect on performance of your audio-video system.



WAudio power noise filter is a great way to limit the negative noises from your electricity and to isolate your system from the contaminated power and has a feature to indicate the correct power phase.



Thanks to the W-3900 you will be able to enjoy a better quality of your audio and video equipment.



The contaminated electricity has also a negative impact on internal circuits and power supplies of your equipment and because the W-3900 works as a buffer between the wall socket and your gear it will help to increase the longevity of connected components.



Removable IEC type power cord gives an option to upgrade your system with a premium audiophile power cable in any time.



Specification:

Max Spike Volt: 3000V

Max Surge Current (8x20s): 1000A

Mas Clamping Volt (8x20s): 470V

Noise Filter: >-10dB (2~100MHz)

AC Power Rating: 110~125V 50/60Hz



Kit Contents:

W-3900 power filter x 1

power cord x 1

• ❤️ PHASE DETECT - Phase and the ground wire connection of AC source can be detected automatically.
• ❤️ OVERLOAD PROTECTION - The sockets will be powered off when total current over 15A, press RESET button to restore power supply.
• ❤️ VOLTAGE PROTECTION - Its circuit detects dangerous voltage irregularities and provides the highest level of surge & spike protection.
• ❤️ HEAVY DUTY DESIGN - Metal casin with thickness aluminum plates, come with 6pcs hospital grade filtered outlets and 4pcs industrial grade direct outlets.
• ❤️ POWER CLEAN - It ensures that all devices connected to W-3900 receive clean & filtered power, which reduces noise and ensures better sound and picture quality from amplifier, DJ equipment, home recording, projector, TV, computer, and other electronics.

User questions & answers

Question:	Does this protect against brownouts / under current as well, or just surge and spikes
Answer:	I'm not sure but this power conditioner is a "power regulator" that improves quality of the power (e.g. power factor correction, noise suppression, transient impulse protection, etc.). Therefore what is important is the power (1800 watts in this case) and it gives you all the time clean 120volts AC for clear sound on your speakers. This Pyle Pro is giving me good clean power without having to pay for a Furman. I believe that the maximum surge will be 6,500 Amps. Maximum Current: 15 amps @ 124 Volts
Question:	since this is also a surge protector, what is the joules rating
Answer:	M,It can be used as an additional outlet, however you want to use it is up to you.I hope this information helps!Mark P.iElectronics
Question:	Will this help clean harmonic distortion put into the line from a generator
Answer:	I would say yes as I have 2 high current 300 watt audio source amps, a 200 watt adcom a Yamaha receiver rated at 140 watts x channel and 2 12" powered subs with 500 watt amps plus my TV DVD player and a cooling fan all plugged into the panamax that is plugged into a dedicated 20 amp circuit.
Question:	Where is the waudio ac power purifier with surge protector made
Answer:	rkm,The rating on this product is 1575 Joules. You can view more information at the manufacturers site: http://www.panamax.com/Products/A-V-Components/MR4300.phpI hope this information helps!Mark P.iElectronics

Product description

For over 30 years, Furman has pioneered the development of AC power products for the most demanding audio, video, and broadcast professionals. Furman's Series Multi-Stage Protection (SMP) delivers the purest AC power and the most comprehensive protection available - going far beyond what is found in traditional surge strips. With Furman's Power Station Series, everyone can reap the benefits of unrivaled power purification and unequalled surge protection. The PST-8 all feature Furman's SMP circuit which incorporates Linear Filtering Technology (Lift) and a high current TVZ-MOV to insure that any electronic device (including televisions, projectors, CD-DVD players, or computers) is fed clean, filtered AC power. This dramatically reduces noise, ensuring consistent peak performance from your equipment. Typical AC filters feature antiquated non-linear circuits. Though these multiple stage filters or power cleaners reduce some noise, they do so unevenly. In fact, they can add noise to your power line due to their filter's excessive resonant peaking. With Furman's proprietary Linear Filtering Technology (Lift), AC noise is suppressed evenly, assuring maximum performance from your system. Furman's SMP circuit offers the highest degree of protection available without sacrificing itself or any of its components. Another feature that is unique to Furman's SMP circuit is automatic extreme-voltage shutdown. Extreme voltages are statistically the most common, damaging AC event. The Extreme Voltage Shutdown circuit automatically turns off the unit when it is fed 137 volts or higher protecting itself and connected equipment from the extreme voltage. Only Furman offers this degree of protection! Add Telco and cable /satellite transient voltage suppression, and you have what is, unquestionably, the most comprehensive protection available in a portable AC power conditioner.

• Advanced Linear Filtering dramatically reduces AC line noise and contamination resulting in improved audio/video clarity
• Series Multi-Stage Protection Plus (SMP+) for the highest level of AC surge suppression; Automatic extreme voltage shutdown guards your valuable equipment from dangerous wiring faults
• Zero ground contamination circuitry assures the delivery of pure AC power thus protecting critical audio/video components
• Cable satellite and Telco connectors deliver advanced protection to connected equipment
• From the #1 brand in professional power conditioning. Perfect for instrument rigs, home recording, DJ equipment, pro audio rigs and home entertainment systems
• Advanced Linear Filtering dramatically reduces AC line noise and contamination resulting in improved audio/video clarity
• Series Multi-Stage Protection Plus (SMP+) for the highest level of AC surge suppression

User questions & answers

Question:	How long is the cord? I need a power strip with an 8-ft cord
Answer:	China
Question:	What is the benefit of this vs the cheaper pst-6? besides the two extra plugs, anything
Answer:	Doubtful. Sounds more like a Wi-Fi issue.
Question:	whats the difference between this model and the PST-8D? the price increase is too much for just another coaxial filtering channel
Answer:	Hi, our sincere apologies but the question is not clear. You may check other details of the unit by visiting our website pyleaudio.com. Type the model number on the search box PCO800 for more details. Thank you.
Question:	If I plug this PST-8 into the wall outlet, then can i plug an extension cord into it that will get me 25 feet away nearer my stage amp equipment
Answer:	17", not counting brackets.

Product features

Furman Power Conditioner PST-8

Furman’s Series Multi-Stage Protection (SMP) delivers the purest AC power and the most comprehensive protection available, going far beyond what is found in traditional surge strips. With Furman’s Power Station Series, everyone can reap the benefits of unrivaled power purification and unequalled surge protection.

For over 40 years, Furman has pioneered the development of AC power products for the most demanding audio, video, and broadcast professionals.

Today’s overworked, outdated power grid delivers poor quality AC power. When connecting sensitive equipment to regular power outlets, AC noise masks and distorts critical signal information which cripples performance. This is why it’s more important that ever to purify or clean the AC powering your sensitive audio/video equipment.

Product description

The AC-215A is specifically designed for today's diverse power purification applications. This compact unit can be mounted behind a projector; LCD or plasma screen; inside of a rack; on a wall or a ceiling; or any other location where discrete power conditioning is needed. Its compact, streamlined design integrates easily into any system, and the included brackets allow you to mount it inconspicuously.

• Furman's exclusive SMP Technology provides the highest level of surge & spike protection available.
• LiFT offers linear AC power filtering to ensure clean power for unequaled audio & video clarity
• Auto-Reset EVS circuitry detects dangerous voltage irregularities and safely powers down itself and connected equipment in unsafe conditions
• Compact chassis design easily attaches to any flat screen television mount or any other remote location; 10 amp rating featuring circuit breaker
• From the #1 brand in professional power conditioning. Perfect for plasma/LCD TVs, projectors, home recording, DJ equipment, pro audio rigs and home entertainment systems.

User questions & answers

Question:	Does the unit balance the power within particular ranges? For example, would it add voltage during Brownouts? If not recommendations welcome
Answer:	I think you need to look at high quality UPS especially one that can rectify voltage/current or go to battery for outage. I bought a CyberPower CP1500PFCLCD PFC Sinewave UPS System recently and it's working flawlessly. Although for high-end audio you may want a Furman P-1800 PFR as power regulator. I actually use both in series and place my high-end audio equipment behind the P-1800 PFR.
Question:	Will this take the 60 cycle hum out of my home tube amp
Answer:	Hum has nothing to do with surge suppression. You either have an un-screened signal cable or a ground loop. Try connecting ALL equipment to the SAME outlet.
Question:	Does this need to be plugged directly into the wall outlet, or can it be plugged into a strip? Can I connect a strip to this unit safely
Answer:	The warranty is void if the unit is plugged into anything but an outlet. The warranty language does not seem to address plugging strips INTO the unit. See also Dan J's response, above.
Question:	The prior unit (ac-215) said that its surge protection was "non-sacrificial." this one does not say that. is it
Answer:	The AC-215A manual says: "Traditional surge suppression circuits sacrifice themselves when exposed to multiple transient voltage spikes, requiring the dismantling of your system and repair of your surge suppressor. Not so with Furman’s SMP. Damaging transient voltages are safely absorbed, clamped, and dissipated. Your connected equipment is protected, while your Furman protects itself!"

Product features

Furman AC-215A Compact Power Conditioner with Auto-Resetting Voltage Protection - Black

The Furman AC-215A Compact Power Conditioner discreetly provides clean and safe power to electronic devices. The Series Multi-Stage Protection (SMP) ensures that components are protected without sacrificing the power conditioner, while the Extreme-Voltage Shutdown guards against over-voltages, such as in an open neutral event. The AC-215 offers Linear Filtering Technology (LiFT), reducing AC line noise, providing clean power for high-performance audio and video.

Series Multi-Stage Protection safeguards electronics

Series Multi-Stage Protection (SMP) provides virtually maintenance-free surge suppression, assuring the highest level of AC protection possible, without sacrificing itself when the offending surge is severe. This means no damaged equipment, no service calls, and no downtime.

Extreme-Voltage Shutdown guards against over-voltage conditions

The Extreme-Voltage Shutdown automatically disconnects power to connected devices when the unit experiences an over-voltage of 137 volts or higher, protecting electronics from open neutral conditions and avoiding expensive replacement costs. It detects dangerous voltage irregularities and safely powers down itself and connected equipment when conditions endanger your components and automatically reconnects when power returns to a safe level.

Linear Filtering Technology (LiFT) ensures clear sound

LiFT ensures that all devices connected to the Furman AC-215A receive clean, filtered power, which reduces noise and ensures better sound and picture quality from TVs, computers, and other electronics.

Design is ideal for compact spaces

Measuring 1.75 by 5 by 8.5 inches (H x W x D) and weighing just three pounds, the Furman AC-215A is ideal for small spaces, such as behind a television or on a media stand.

Product description

9 Outlets total outlets with Dual Retractable LED Lights

• 9 Outlets total outlets with Dual Retractable LED Lights
• Furman's exclusive SMP technology provides the highest level of surge & spike protection available.
• Isolated outlet banks minimize inter-component interference and noise contamination.
• 15 Amp rating featuring a high inrush magnetic circuit breaker for added protection.
• From the #1 brand in professional power conditioning. Perfect for instrument rigs, home recording, DJ equipment, pro audio rigs and home entertainment systems.

User questions & answers

Question:	Does this work for PC? I use PCIE sound card
Answer:	Thanks for your interest, yes, it is version 3.0, best wishes,Nice wealth
Question:	If i am comparing one of these 2 items, which one i should choose if i am confused? furman pl-8c 15 amp & pl-plus c 15 i will use it with 240v
Answer:	Thanks for your interest. Yes, you can power the receiver via power over ethernet switch, but this one is receiver only, you should use it with the sender.
Question:	Is this unit capable of cleaning non-sine wave power I.E. old school generator power
Answer:	No, it cannot work with the USB model transmitter.
Question:	What is the advantage of using this over a good, high quality UPS if my power comes completely from a generator
Answer:	Yes, this is the receiver only. But it is the same as the one in the whole set. It supports one transmiter to multiple receivers. You can add it to the system.

Product description

Home Theater Power Center with Clean Power Stage 3 v.2.1 Circuitry Power Conditioner, Voltage Filter, Noise/Interference Elimination, Processor Sequencer

• Supplies Clean Filtered AC Power: 2-Stage High Insert Dissipation - AC Voltage, Ambient Temperature & Step Time Display
• Micro-Controller Ensures High Level Precise Timing - Built-in 2 Stage EMI Filter for Each Output (On Rear Panel)
• Able to Series Link More than 100 Units with Automatic Master Unit Display - Selectable Step Time and Real Time Display
• Output Cut Switch for All Nine Channels - Monitors AC Voltage in Real Time - Display Shows Wiring and Ground Status
• LED Displays: Output Cut, Master, Bypass, Power, AC Voltage and Temperature - Step Time Display in 7 Segment LED

User questions & answers

Question:	Can it power 220v AC devices
Answer:	this device has only 120V nominal outputs. the following link will take you to the Pyle website and a link to the actual owners manual that will tell you anything you want to know about the Pyle PS900 https://www.pyleaudio.com/sku/PS900/Power-Supply-Processor-Sequencer---Power-Conditioner-NoiseInterference-Eliminator
Question:	Can I use this to regulate a regular generator for sensitive electronics
Answer:	NO! Absolutely NOT ! This is NOT an automatic voltage regulator and this is NOT a 50/60Hz sine wave reconstructions filter. The 2 stage conducted interference filter in this power conditioner removes noise at higher frequencies, typically well over 1000 Hz. If an electronic device is tripping off otherwise misbehaving when supplied from a "regular generator" this is unlikely do anything to change the situation. On the other hand if you have a modern generator you don't need to add anything. A classic "regular generator" from the design most commonly used before 1985 is an alternator that regulates its AC output using electromagnetic feedback from the AC load current in the main stator winding to boost the exciter winding that drives the alternator's rotating exciter coil through a DC rectifier, the inductance of the exciter coil is the only DC filter, hence the superimposed harmonic ripple. This type of generator has poor voltage regulation especially for capacitive (electronic power supply) loads, briefly sags/surges with changes in the load. This type of alternator produces a sine wave with smaller superimposed harmonic sine wave the harmonic determined by the number of poles in the stator's exciter drive. Since roughly 1985 a "regular generator" doesn't have electromagnetic feedback for the exciter supply and adds an electronic regulator to the rectified DC from the exciter winding output to regulate the 60Hz AC output. The regulated DC drive for the exciter coil filters out the exciter drive harmonic and the main output is a clean sine wave at the rotating speed of the machine, typically 3600 RPM for 60 Hz in North America. Electronically regulated "regular generators" don't have any voltage sag or surge unless the machine is grossly overloaded. The prime mover (internal combustion engine) is frequency regulated not phase locked, which means that it doesn't respond instantly to large load changes and the rotating machine so briefly slow down and speed up causing the AC line *frequency* to wobble, down when load suddenly increases, up when load suddenly decreases. Electronic power supplied simply rectify the AC line and are insensitive to small frequency deviations. It isn't practical to update generator with the older non-electronic regulation by adding electronic regulation, which is to say it can be done but the cost of the required expertise to do it is a multiple of the cost of replacing a residential machine. So - unless you have a very old design generator, you don't need to do anything to regulate the power. If you have an old design generator, the best choice is probably to replace the generator, an electronic AVR (automatic voltage regulator) can regulate the voltage but it won't clean up the sine wave, its just an elecronically tap changing transformer, while a ferro-magentic resonant transformer, aka a Sola transformer, will remove power spikes, regulate voltage, filter harmonics and even hold up the load during single cycle line power drop outs, but its not widely marketed to consumers, and the simplest designs have an audible buzz.
Question:	Is it loud or quite
Answer:	Quite quiet
Question:	Will this work for my house stereo components? Does it have enuff power to crank turnup stero with out starving it
Answer:	Yes, I use this in my house to power my Stereo components

Product features

Power Supply Processor Sequencer

Technical Pro PS17U rack mount 17 outlet power supply surge protector with 5V USB charging ports, A/C power center designed to eliminate extension cords and messy wires, 13 power switches on front panel with blue illumination.

High load power cord (4 foot), maximum load is 15 amps or 1800 watts, rack mountable ears can be used for a rack or can be rotated 90 degrees to mount under or over a shelf or deck

Product description

Clean electricity to improve the performance of your audio-video system.



The electricity network in our homes or workplaces is exposed to different interferences for instance electromagnetic interference (EMI) generated by appliances connected to the same network (refrigerators, air conditioners, computers etc.). These interferences are not only produced inside your house or office but by all appliances in your building or even outside it and can differ on the time of day or week when the traffic on the electrical network changes. All these interferences which we call noises can get into your AC power and interfere with your system. This “dirty” electricity can have a negative effect on performance of your audio-video system.



WAudio power noise filter is a great way to limit the negative noises from your electricity and to isolate your system from the contaminated power and has a feature to indicate the correct power phase.



Thanks to the W-4800 you will be able to enjoy a better quality of your audio and video equipment.



The contaminated electricity has also a negative impact on internal circuits and power supplies of your equipment and because the W-4800 works as a buffer between the wall socket and your gear it will help to increase the longevity of connected components.



Removable IEC type power cord gives an option to upgrade your system with a premium audiophile power cable in any time.



Specification:

Max Spike Volt: 3000V

Max Surge Current (8x20s): 1000A

Mas Clamping Volt (8x20s): 470V

Noise Filter: >-10dB (2~100MHz)

AC Power Rating: 220~240V 50/60Hz



Kit Contents:

W-4800 power filter x 1

power cord x 1

• 【OVERLOAD PROTECTION】 - The sockets will be powered off when total current over 15A, press RESET button to restore power supply.
• 【VOLTAGE PROTECTION】 - Its circuit detects dangerous voltage irregularities and provides the highest level of surge & spike protection.
• 【HEAVY DUTY DESIGN】 - Metal casin with thickness aluminum plates, come with 6pcs filtered outlets and 2pcs direct outlets.
• 【POWER CLEAN】 - It ensures that all devices connected to W-4800 receive clean & filtered power, which reduces noise and ensures better sound and picture quality from amplifier, DJ equipment, home recording, projector, TV, computer, and other electronics.
• 【SATISFACTION GUARANTEED】 We offer 12-month warranty. If you have any questions or are not satisfied with our products, please feel free to contact us and we’ll respond to you immediately.

User questions & answers

Question:	What is the size of this unit, nothing is posted other than the box size as far as I could see
Answer:	It is the source of the interference source that can be filtered out, other interference sources can not be solved

Product description

For over 30 years, Furman has pioneered the development of AC power products for the most demanding audio, video, and broadcast professionals. With Furman's Power Station Series, everyone can reap the benefits of unrivaled power purification and unequalled surge protection. Today's overworked, outdated power grid delivers poor quality AC power. When connecting sensitive equipment to regular power outlets, AC noise masks and distorts critical signal information which cripples performance. This is why it's more important that ever to purify or clean the AC powering your sensitive audio/video equipment. The PST-6 gives you the high level of protection of a Furman power conditioner, but without all of the advance features that the other Power Station products possess. Also, it is contained in a sturdy aluminum chassis.

• Advanced surge suppression with zero ground contamination offers superior protection over a standard power strip
• Cable satellite and Telco connectors deliver advanced protection to connected equipment
• Compact design enables discrete placement
• Sturdy Aluminum chassis
• From the #1 brand in professional power conditioning. Perfect for instrument rigs, home recording, DJ equipment, pro audio rigs and home entertainment systems
• Advanced surge suppression with zero ground contamination offers superior protection over a standard power strip.
• Cable satellite and Telco connectors deliver advanced protection to connected equipment
• Compact design enables discrete placement

User questions & answers

Question:	Can the plug be ordered for Swiss/EU standards
Answer:	Thats something Furman probably should answer.
Question:	Can items like the following be plugged into this unit: electrical fans, as in air filtration, compressors, refridgerators and LED grow light systems
Answer:	Some equipment manufactures of electrical fans and other types of equipment listed will advise you not to use surge pertection equipment.
Question:	How much power conditioning
Answer:	The PST-6 gives you the high level of protection of a Furman power conditioner, but without all of the advanced features that other Power Station models possess. Surge protection and filtration housed in a sturdy aluminium chassis.
Question:	Does this have same power conditioning as cheaper pst-2+6? looking to stop hum/buzz in two fishman sa220s daisy chained for a solo acoustic performer
Answer:	Yes. (Per the company website https://www.furmanpower.com/product/15a-8-outlet-surge-suppressor-strip-PST-2%2B6 )

Product description

The Ideal Power Distribution Solution for distributing power from a UPS system, generator or utility wall outlet. Configurable for 1U rackmount (horizontal), wall-mount, workbench, under-counter and similar installations. Making it ideal for IT, data-centers, networking, audio, video, professional office and home use. Features: - Universal Power Supply for Electronic Devices & Equipment - Front Panel AC Outlets - (16) Rear Panel Wired Power Cables - Integrated ‘Half-Hot’ / Switched AC Outlet - USB Port for Device Charging - (Works with Smartphones, Tablets, MP3 Players, etc.) - Compatible with 1U Mount 2 or 4 Post Rack Spaces - Includes Detachable Rack Mount Brackets - Plastic Cover Encased Power ON/OFF Switch Technical Specs: - Universal Rack Mount Size Standard: 1U - 15 Amp Circuit Breaker - Power Cable Length: 15’ ft. - Rear Panel Individual Power Cable Length 4.0’’ & 6.0’’ -Each - Power Supply: 110/240V (USB Power: 5V/2A) - Dimensions (L x W x H): 17.3’’ x 11.6’’ x 1.7’’ - Sold as: 1 - Weight: 8.7 lbs. —— SATISFACTION GUARANTEED —— Your satisfaction is our #1 priority. If this item fails to meet your expectations we will accept it back a full refund within the first 30 days. We also stand behind this product with a limited 1-Year manufacturer warranty. Contact us if the item should show any defect within the first year we will help exchange it for a new one.

• DETACHABLE 1U RACK DESIGN - Versatile space saving 1U form factor rackmount power strip ideal for standard 19-inch racks. Detachable mounting flanges are configurable for rack-mount, wall-mount and under-counter installation.
• FLEXIBLE REAR OUTLETS - 3 wide spaced front panel outlets and 16 flexible rear facing power cable outlet plugs allowing room for AC adapters and transformers. Integrated USB port for convenient simultaneous power supply to all your favorite devices.
• PREMIUM SAFETY FEATURES - Integrated switched front panel AC outlet, plastic cover encased power switch. Built-in 15-amp circuit breaker prevents dangerous circuit overloads damaging equipment, shutting off AC input when load draws too much power.
• 15FT POWER CABLE - Provide power supply distribution to previously un-powered areas away from power sources with an extra long 15-feet power cord, and power applications, or locations that require power, to many devices simultaneously.
• 110/240V - For worldwide usage. Optimized for reliable distribution of alternate waveform AC power from a UPS system, generator or utility wall outlet to put you in control of getting reliable power service where you need it most.

User questions & answers

Question:	does the standard rack mount hold the weight or do you need support rails
Answer:	Hi, yes it can hold the weight of the unit. However, that will also depend on how many devices you wanted to connect. It will also add weight so you have to use support. You may check other details of the unit by visiting our website pyleaudio.com. Type the model number on the search box PCO860 for more details. Thank you.
Question:	can I use this for my on board studio gear and my pcs
Answer:	Don’t see why not. I’m using it as a power center for my home network. 3 external HDs , switch, modem, computer....
Question:	How deep is the chassis part of this unit? The spec says 11.6" deep but I think that might be with the length of the dangly plugs
Answer:	The actual metal chassis is only about 6-7" deep
Question:	Does this unit help suppress EMI/hum/noise from audio gear
Answer:	No, just a really high quality power distribution unit. Filters should be installed between your amps and this.

Product description

The 15 Amp P-1800 AR delivers a stable 120 volts of AC power to protect equipment from problems caused by AC line voltage irregularities such as sags, brownouts, or over voltages - all of which can cause sensitive electronic equipment to malfunction or sustain damage. The P-1800 AR accepts input voltages over a wide AC voltage range and transforms it to a constant output of 120V, +/- 5V. Voltages beyond that range may also be converted to usable levels, depending on the range variance. Additionally, the P-1800 AR is a full-featured power conditioner that filters and purifies AC power, reducing line noise and ensuring optimum performance. Not only will your equipment perform better with Furman's Linear Filtering Technology (Lift), but it will also be fully protected by our exclusive Series Multi-Stage Protection (SMP), and Extreme Voltage Shutdown (EVS). This circuitry provides the highest level of power protection available.

• True RMS Voltage Regulation delivers a stable 120 volts of AC power to protect equipment from problems caused by AC line voltage irregularities
• Furman's exclusive SMP technology provides the highest level of surge & spike protection available; Lift offers AC power filtering to ensure clean power for unequaled audio & video clarity
• Advanced EVS circuitry detects dangerous voltage irregularities and safely powers down itself and connected equipment in unsafe conditions
• Front panel USB convenience outlets allows you to charge most media devices or power a USB lamp.
• From the #1 brand in professional power conditioning. Perfect for instrument rigs, home recording, DJ equipment, pro audio rigs and home entertainment systems
• SMP+ Series Multi-Stage Protection Plus for non sacrificial AC surge protection
• EVS, Extreme Voltage Shutdown

User questions & answers

Question:	I have a separate surge protector. Should this Furman voltage regulator be placed between the wall outlet and the surge protector, or vice versa
Answer:	Yes, C2G is compatible with android (at least with Samsung), and Windows 8.1 and up. For the Windows devices, make sure your device originally came with Windows 8.1.
Question:	Does this unit support sequenced receptacle turn on
Answer:	No wifi needed
Question:	Is this really the p-1800 ar? the photo shows the p-1800 pf-r, which is not the same product
Answer:	It only uses the HDMI signal. Windows and other O/S info do not apply.
Question:	What does this unit do If: 1) The incoming voltage is 115 or 125? 2) The incoming voltage is 110 or 130? 3) The incoming voltage is 100? Thanks
Answer:	I will test it tomorrow and let you know.