10 best wireless guitar system
Wireless guitar systems are devices designed to transmit the audio signal from an electric guitar, bass guitar, or other stringed instruments to an amplifier or a mixing console without the need for traditional instrument cables. These systems are commonly used in musical performances and studio recording for their convenience and freedom of movement. Here's what you need to know about wireless guitar systems:
Transmitter and Receiver: A typical wireless guitar system consists of two main components: the transmitter and the receiver. The transmitter is usually attached to the instrument, while the receiver connects to the amplifier or audio mixing equipment.
Wireless Technology: These systems employ various wireless technologies, such as UHF (Ultra High Frequency) or VHF (Very High Frequency) radio frequencies, digital transmission, or Bluetooth. The choice of technology can impact factors like signal quality, range, and interference resistance.
Freedom of Movement: Wireless guitar systems allow musicians to move freely on stage without being tethered by a cable.This freedom is especially important for performers who want to interact with the audience or engage in energetic stage movements.
Signal Quality: High-quality wireless guitar systems are designed to preserve the integrity of the instrument's sound. They transmit audio with minimal latency, ensuring that the signal remains clear and free from interference.
Range: The range of a wireless guitar system can vary significantly depending on the model and technology used. Some systems provide a range of 100 feet or more, allowing musicians to move around large stages without signal dropout.
Battery Life: Transmitter and receiver units are typically powered by batteries, and the battery life can vary. Musicians should ensure that their wireless systems have sufficient battery life for the duration of their performances or recording sessions.
Compatibility: It's essential to ensure that the wireless guitar system is compatible with both the instrument and the equipment it will be connected to. Different systems may use different types of connectors, such as 1/4-inch jacks or XLR connectors.
Interference Mitigation: In crowded RF environments, wireless systems may be susceptible to interference from other wireless devices. High-quality systems incorporate features to minimize interference and maintain a stable signal.
Diversity Receivers: Some wireless guitar systems come with diversity receivers, which use multiple antennas to improve signal reception and reduce the chances of dropouts.
Cost: The cost of wireless guitar systems can vary widely, with higher-end models offering more advanced features and better overall performance.
Setup and Maintenance: Proper setup and maintenance are crucial for the reliable operation of wireless guitar systems. Musicians should regularly check and replace batteries, as well as ensure that frequencies are set correctly to avoid interference.
Wireless guitar systems are popular among musicians for their convenience and ability to enhance live performances by enabling greater mobility and reducing clutter on stage. When choosing a wireless guitar system, musicians should consider factors like signal quality, range, battery life, and compatibility to find the system that best suits their needs.
Below you can find our editor's choice of the best wireless guitar system on the marketProduct description
BOSS WL‑50 Guitar Wireless System
- Plug-and-play wireless system in a stompbox-size format for pedalboards
- Optimum wireless connection set automatically, with no complicated setup required
- Newly developed BOSS technology delivers premium audio performance with rock-solid stability, ultra-low latency (2.3 ms), and 65-foot/20-meter range (line-of-sight propagation)
- Built-in rechargeable battery in transmitter provides up to 12 hours of continuous playing time
- Plug the transmitter into the receiver’s docking port for charging and automatic wireless setup
- Selectable cable tone simulation options: short, Long, and bypass
- Receiver powered by optional psa-s adaptor or two AA batteries
User questions & answers
Question: | Is it possible to also charge the transmitter via usb or does it only charge when inserted in the base unit |
Answer: | It is 22 inches long and 11 inches deep. It holds more than you would think, and it also has a few small compartments. |
Question: | Will it work on a telecaster type jack |
Answer: | Yes |
Question: | Will it work on a telecaster type jack |
Answer: | If you are a smalll child maybe, but teenager or older no. |
Question: | Does it need a cable going through the amp |
Answer: | Yes. It's protect your gps screen because it's really hard case. I'm using them now. It work great and protect my Garmin GPS. |
Question: | Will this fit a youth mask |
Answer: | No, will not fit both |
Question: | Will this fit force v3 two piece mask |
Answer: | The case is small: you can carry it in one hand. There's no carry strap. I always carry it inside my backpack. I'm sure it would be waterproof in a heavy rainfall, but if it got dropped in water and floated for some time, some wetness may possibly leak in through the zipper. But I don't know; I've never tried it! I have no complaints with the case. It's exactly what I was looking for: a strong case to store a pico projector. |
Question: | Will this fit rip-it defense softball fielders mask |
Answer: | It is very big inside and out. It has more than enough room for my Garmin Nuvi 2597, power cord, suction cup base and the heavy dashboard mount. All with room to spare. |
Question: | Will it fit Easton M10 hockey style mask |
Answer: | No, it does not |
Product features
WL-50 Wireless System
With the WL-50, it’s never been easier to bring wireless freedom to your pedalboard. Driven by new BOSS technology, the WL-50 delivers premium sound and a plug-and-play experience that eliminates all the hassles normally associated with wireless systems. The stompbox-sized receiver fits right alongside your other pedals, and includes a docking port for charging the transmitter and automatically setting the best wireless connection. There’s even a handy DC output, allowing you to distribute power to multiple pedals on your board.
Setup is quick and simple, and you’re able to move about freely while playing at home, jamming with friends, and performing on stage. Once you experience the wireless independence provided by the WL-50, you’ll never go back to using a standard cable again!
Lightning-Fast BOSS Wireless Technology
Equipped with high-performance BOSS wireless technology that debuted in the Katana-Air wireless guitar amp, the WL-50 delivers exceptional sound quality with wide dynamic range. Working in the 2.4 GHz frequency band, the system automatically accesses the optimum channel to ensure rock-solid audio performance with absolutely no drop-outs. And with ultra-low latency of just 2.3 ms, you’ll always enjoy great playing feel with no lag whatsoever. Up to 14 BOSS wireless systems can be used simultaneously in one space, allowing multiple musicians to enjoy wireless freedom at the same time.*
*Environmental conditions may affect the actual number of simultaneous systems available.
Just Another Pedal on Your Board
The WL-50 has a slightly smaller footprint than a standard BOSS compact pedal and can be powered just like your other stomps, making it an easy addition to any pedalboard setup. Simply place it at the beginning of your chain and connect the receiver’s output to the first pedal. The receiver is also equipped with a regular ¼-inch input jack, so you can always use a traditional guitar cable in a pinch.
The WL-50 features a built-in dock that’s used to charge the transmitter and establish the wireless connection. The system’s streamlined profile is maintained even when the transmitter is docked, with a total height that’s about the same as a normal BOSS stomp.
Plug In and Rock
Once you’ve installed the WL-50 on your board and charged the transmitter, it’s literally as simple to use as a standard guitar cable. Just dock the transmitter in the receiver, wait about 10 seconds, and then plug the transmitter into your instrument. That’s it! The optimum wireless connection is set automatically during docking, with no other user operation required.
The WL-50 includes two selectable cable tone simulation options that reproduce the natural capacitive effect that’s introduced when using a guitar cable with standard passive pickups. You can also bypass the effect when cable tone simulation is not desirable, such as when using an acoustic/electric guitar with an onboard preamp or an instrument with active pickups.
Battery-Powered Operation for Mobile Gigging
At street gigs and other mobile performance situations, running your pedals on battery power is often the best choice. The WL-50 receiver can run for up to ten hours on two AA batteries, allowing you to take your wireless setup with you! While running on battery power, the receiver is unable to charge the transmitter. But don’t worry—you can still charge it using a common USB adaptor (5 V/500 mA or higher), the same type used with most smartphones and tablets.
When the receiver is powered via a BOSS PSA-S adaptor, it becomes a power distribution center for other stomps on your board. By using an optional PCS-20A daisy-chain cable, you’re able to power a number of BOSS compact pedals at the same time.
Product description
- Includes: GLXD4 Wireless Receiver, GLXD1 Wireless Bodypack Transmitter, WA302 Instrument Cable, SB902 Rechargeable Lithium-Ion Battery, PS42US Power Supply, USB Charge Cable and Carrying Case
- Operate up to 4 compatible systems in typical setting, up to 8 maximum under ideal conditions
- Best-in-class intelligent lithium-ion battery rechargeability allows up to 16 hours of continuous use and greatly reduces the cost of ownership
- LINKFREQ Automatic Frequency Management
- Intelligent frequency management quickly identifies the best open frequencies
User questions & answers
Question: | Can I hook up a lavalier mic to this if needed |
Answer: | I believe that they make another model for microphones some of which include a headset mic. Those I would think would be more suitable. Check the manufacturer website for breakdowns of their various models |
Question: | can i use this with pedals |
Answer: | Yes. |
Question: | Hola sirve para un Bajo electrico |
Answer: | Si es buenísimo |
Question: | easy to set up on any speaker/ampli |
Answer: | Yeah it’s just a regular 1/4” jack like any guitar cable plugs into the amp input and that’s it. If you are looking for a wireless I can’t recommend this enough if only for the rechargeable battery feature. I’ve played with guys who had to change out their wireless batteries in the middle of every rehearsal. For me the ONLY downside on this was no rackmount kit. But I just put a piece of Velcro on the bottom and another piece on the top of the case my amp head is in. I’d advise getting a second battery. The charge lasts a LONG time but it’s always good to have a backup |
Product description
Relay G10 is the world s easiest guitar wireless system. Just plug in your instrument and it works automatically-no additional setup required. You ll hear your tone in amazing detail thanks to pure 24-bit Relay digital wireless sound quality-the same technology that top pros use on stage. The built-in rechargeable battery provides up to six hours of playing time, and sleep mode extends battery life to as much as 150 hours. When it s time to recharge, simply plug the transmitter into the receiver. Relay G10 features a simple and intuitive design that makes going wireless as easy as using a cable
- 2.4 GHz Digital Guitar Wireless System with Rechargeable Transmitter
- Automatic channel setup-just plug in and play
- Recharge the transmitter by docking it on the receiver
- 50-foot range indoors
- "No-pop" audio mute - only passes audio when the transmitter is fully plugged in
- Up to 6 hours of battery life, with up to 150 hours in sleep mode
User questions & answers
Question: | If I have 3 guitar players using them will they interfere with each other |
Answer: | Yes but you need to buy an acoustic guitar pick up accessory. Amazon has several different types |
Question: | Will this work well with a bass guitar and also small venues |
Answer: | My son is ambidextrous and was able to use it both ways but it was just something to play for him... he didn’t get lessons or anything but wanted a “real” guitar his size so I’m sorry my answer isn’t too definitive. |
Question: | What does this mean; "This is an aftermarket of generic part |
Answer: | I'd probably go with a 38 inch if the person is tall and has long arms |
Question: | Geez, am I missing something? Does the charger double as the receiver |
Answer: | Yes, it has nylon strings. |
Product features
Radically Simple Design
We designed Relay G10 to be as easy to use as a standard guitar cable. Just plug in your guitar, and the transmitter and receiver select the optimum channel and lock together automatically. If you perform with multiple guitars, G10 makes it faster than ever to switch instruments on the fly—the transmitter is compatible with all types of guitars and transfers from one to the next in seconds. Plus, a separate XLR output and 1/4” output gives you greater flexibility in how you route your signal.
Fast and Simple Recharging
Some wireless systems use external batteries, which quickly gets expensive. Others require bulky and cumbersome charging stations. Relay uses a durable rechargeable transmitter that provides up to 6 hours of playing time on a single charge. When it’s not in use, G10 automatically goes into sleep mode, extending battery life up to 150 hours. And when you’re ready to recharge, simply dock the transmitter on the receiver. It’s the easiest and fastest way to recharge your system.
Get the Most Out of Your Performance
Relay is packed with innovative technology to fuel your performance. You’ll experience the same character and feel of a standard guitar cable thanks to innovative Cable Tone technology. Relay G10 also eliminates distracting pops when you plug in your guitar—the system only transmits signal once you’re completely connected. Finally, an illuminated receiver makes it easy to view sync and battery status at a glance.
Relay G10
For guitarists, nothing is more important than tone. We’ve been building guitar wireless longer than anyone else, and Relay is the only system that delivers your tone without compression or compromise. Featuring wider frequency response, next-generation technology, and more dynamic range than other wireless systems, Relay ensures that your signal gets to your amp in its purest form.
2.4GHz Signal—Free from Interference
Traditional analog wireless systems are plagued by interference from TV broadcasts, white space devices and other sources. Relay G10 operates in the 2.4GHz band, so there’s no danger of these external sources wreaking havoc with your signal. Encoded DCL (Digital Channel Lock) technology distinguishes your Relay G10 audio from other signals—including WiFi—ensuring the integrity of your signal.
License-free, Worldwide
If you’re confused by the license fees required to operate an analog wireless system, don’t worry—Line 6 digital wireless systems eliminate that need. Relay G10 is fully FCC compliant and operates license free worldwide, from Hollywood to Tokyo.
Product description
The AirLine 88x AG8 system combines professional audio quality, reliable operation in the UHF band with extremely easy setup. The AG8 Guitar Transmitter plugs directly into the instrument, free of any cables or beltpacks. This innovative design is compact and unobtrusive, offering exceptional freedom and mobility to rule the stage with confidence. It features IR sync to wirelessly match the receiver and transmitter frequency, an audio mute switch, dual-color LED battery status indicator and up to 12 hours of continuous operation on a single AA battery.
On stage, the AirLine 88x AG8 system provides excellent versatility. The AG8 plug-in transmitter was designed with a custom, dual-position connector to fit both angled and flush output jacks, enabling it to be used with multiple instruments. The system also produces extended low-end frequency clarity ideal for bass, or virtually any acoustic-electric instrument fitted with a pickup. An adjustable gain control allows for optimal gain staging for your instrument's output.
The system’s rack mountable CR88x receiver provides 100 wireless channels across a broad 25 MHz bandwidth and uses one-touch scanning to automatically select the clearest frequency available in your performance space. The receiver’s True Diversity design minimizes dropouts while tone-key and auto-mute technology prevents undesired noise and interference when the transmitter is out of range. The AirLine 88x AG8 system provides flawless wireless reception within a 300' range.
- 100 operating channels across 25 MHz bandwidth
- Up to 8 systems can be used simultaneously per frequency band (region dependent)
- AG8 Guitar Transmitter plugs directly into the instrument (no beltpack or cable required)
- Dual-position connector fits a variety of guitar jacks
- Transmitter operates for up to 12 hours using a single AA battery
- CR88x True diversity receiver with one-touch automatic frequency scan finds the best operating frequency
- Receiver features balanced XLR and unbalanced 1/4" outputs for connecting to mixers, PA systems and AV equipment
Product description
- The rugged PGXD1 body pack transmitter easily clips onto a belt or guitar strap, and provides you with a 20Hz - 20kHz frequency range, up to 10 hours of continuous use on 2 standard AA batteries (not included), and 200' of wireless freedom.
- The PCDX4 receiver offers 24-bit/48kHz accurate sound, auto frequency selection, and greater reliability thanks to its true digital diversity.
- The WA302 instrument cable plugs into guitar, bass, or any other 1/4 Inch line-level instrument output.
User questions & answers
Question: | Can this system be used with a guitar and bass at the same time |
Answer: | The transmitter has only one input/output. So it cannot be used on two instruments at the same time. It can be switched between two instruments very quickly with no "setup" required other than plugging the receiver into the correct amp. Also, as the unit transmits on only one channel, trying to "mix" two instruments would be less than ideal. You could (I'll muddy this up real good now) plug a bass and guitar into a mixer and transmit from a sub out and use the mono mixed signal thru the single channel. Doing so would require enough sound equipment on the reciever to sort out the bass thru a crossover or whatever. This would defeat the purpose of a wireless system...IMHO. My recommendation: buy two units. You'll like the unit. |
Question: | Does it work with guitar active pickups |
Answer: | It does. It works with active or passive. Also works well with bass or guitar. Works with 'fex. Develop good battery schedule for the transmitter and you'll love it! When the transmitter (instrument unit) batteries die, it does so quickly and without warning. That said, it isn't battery hungry. Battery life is quite acceptable and the batteries are easy to change. |
Question: | Can you use it with in ear monitors |
Answer: | Yes but you need a separate receiver and transmitter for your in ear monitors. |
Question: | will this do mic and instrument at the same time |
Answer: | No I do. It believe this will a mic and instrument at the same time. There is only one channel output |
Product description
Relay G50 12-channel wireless system redefines the wireless experience for guitarists and bassists. Its superior sound, professional dependability and refreshing simplicity are simply unavailable from other wireless systems.
Superior Sound
Relay G50 provides a pure signal. Its clarity rivals that of the highest-quality guitar cables. Guitars get a beautiful high-end sparkle and basses get a thunderous low-end punch, even at distances of up to 200 feet. Traditional wireless systems compromise their sound by rolling-off crucial high- and low-end frequencies and compressing their signals. Relay G50 offers superior sound with full bandwidth and zero compression.
Professional Dependability
Relay G50 broadcasts over the 2.4GHz band, which keeps its signal free from many kinds of interference. Traditional wireless systems, on the other hand, are susceptible to dropouts, static and many other kinds of interference. For added security, Relay G50 employs exclusive signal protection technology--it simultaneously broadcasts encrypted data streams to multiple antennas. Refreshing Simplicity Relay G50 is a low-profile system that's easy to use. The lightweight transmitter remains out of the way of your performance and its LCD displays channel number and battery life. The rugged metal receiver offers easy-to-read LEDs that display power, status and battery life. Its dual 1/4-inch outputs make it an easy addition to your pedal board.
![]() Receiver features side-mounted 1/4-inch ins and outs and internal antennas, making it easy to add to a pedal board. |
Attached to Your Guitar Cable?
For players attached to cables, adopting a wireless system introduces many questions: What will it feel like? Will it change my sound? Relay G50 sounds just like a cable, but it also sounds just like your cable. Relay G50 features EQ settings that match the frequency responses of typical guitar cables.
VWT
Exclusive VWT (Virtual Wire Transmission) technology ensures full-range frequency response, excellent transient response, and wide dynamic range--just like a high-quality guitar cable.
Superior specs
Relay digital wireless systems produce full-range tones with 10Hz-20kHz frequency response, exceedingly low noise with up to 120dB dynamic range, and studio-quality resolution with 24-bit A/D conversion. (Comparably priced analog wireless systems offer 50Hz-15kHz frequency response and >90dB dynamic range. This wreaks havoc on your tone, especially if you use a high-gain amp.)
Cable tone simulation
Using a cable and a wireless system? Now you can switch back and forth without having to adjust the tone settings on your amplifier. Relay digital wireless systems feature a Cable Tone Simulator, which lets you match the sound of your Relay to the sound of your cable.
Compander-Free
Companders squash your signal and ruin your tone. Analog wireless systems require companders but Relay wireless systems do not. Remaining compander-free enables Relay to deliver a beautiful high-end sparkle, thunderous low-end punch, and touch response that analog wireless systems simply cannot deliver.
Remaining compander-free gives better sound than analog wireless systems.
DCL
Exclusive DCL (Digital Channel Lock) technology automatically locks out all sources of interference. The only sound that will come out of your amplifier is you - not static, not Top 40 radio, just you. Guaranteed.
2.4GHz broadcast
The best way to avoid interference? Don't get in its way. Relay digital wireless systems broadcast in the 2.4GHz band, which successfully avoids interference caused by TV stations, public safety broadcasts, cell phone towers, and other high-powered sources.
What about WiFi?
Worried about interference caused by 2.4GHz WiFi networks and Bluetooth® devices? Don't be. Relay digital wireless systems use uniquely addressed and encoded digital transmission technology. Your tone will make it from your transmitter to your receiver free of interference.
![]() Don't waste time scanning for open channels. |
Full quality, no matter what
Whether you're playing two feet from your Relay or at the edge of its range, you get the same great specs: full frequency response, superior dynamic range, cable-inspired dependability, and 24-bit A/D conversion.
All channels, all the time
All channels in all Relay digital wireless systems work all the time. Too good to be true? Maybe for an analog wireless system. Relay digital wireless systems are different. There's no website to reference, and no need to scan for open channels.
- 200-foot range, line-of-sight
- Wide dynamic range of more than 110dB(A weighted).Broad 10Hz – 20kHz frequency response; Superior 120dB dynamic range; 24-bit digital conversion, 8 hours of battery life (AA alkaline batteries)
- Comes complete with transmitter, receiver (Rugged metal enclosure) and all necessary accessories including locking cable, power supply and batteries
- 2.4GHz band is optimal for guitar wireless, FCC/DTV compliant
- Multiple layers of signal protection; Encrypted data stream; Simultaneous broadcasts on multiple channels
User questions & answers
Question: | Is this only able on line of site or can i play it in another room. As in amp in one room while playing inAnother room |
Answer: | It is possible to play in another room, however the recommendation is to always have a line of site when you're on stage or performing live for the best possible performance from the system. |
Question: | Do I still need a preamp for my acoustic transducer pickup |
Answer: | Yes, I would think so. There is no gain boost. |
Question: | Can you add transmitters? Assuming it connects to the guitar strap, wouldn't this be best for a two guitar rig |
Answer: | Yes you can. Just set the channel on the 2nd transmitter to the same channel on the receiver, and the 1st transmitter. This is assuming a 2 guitar rig is you switching between 2 guitars. |
Question: | Does the transmitter come with a 1/4 cable |
Answer: | Yes it does, it comes with a special 1/4 cable that attaches to the transmitter. |
Product description
Relay G30 redefines the wireless experience for guitarists and bassists. Its superior sound, professional dependability and refreshing simplicity are unavailable from other wireless systems.
|
Superior Sound
Relay G30 provides a pure signal. Its clarity rivals that of the highest-quality guitar cables. Guitars get a beautiful high-end sparkle and basses get a thunderous low-end punch, even at distances of up to 30 meters. Traditional wireless systems compromise their sound by rolling-off crucial high- and low-end frequencies and compressing their signals. Relay G30 offers superior sound with full bandwidth and zero compression.
Professional Dependability
Relay G30 broadcasts its robust signal over the 2.4GHz band. This keeps the signal free from many kinds of interference. For added security, Relay G30 employs exclusive signal protection technology: it broadcasts an encrypted data stream on six channels simultaneously.
![]() Receiver features side-mounted 1/4-inch ins and outs and internal antennas, making it easy to add to a pedal board. |
![]() Switch between cable and wireless systems without having to adjust the tone settings on your amplifier. |
Traditional wireless systems, on the other hand, are susceptible to dropouts, static and many other kinds of interference. Broadcasting over congested UHF bands, their signals may be affected by interference generated as far away as 160 kilometers, or more.
Refreshing Simplicity
Relay G30 is a low-profile system that's easy to use. The lightweight transmitter remains out of the way of your performance, and the rugged receiver can sit on top of your amp or be added to your pedal board. The receiver offers easy-to-read LEDs that display power, status and battery life.
Attached to Your Guitar Cable?
For players attached to cables, adopting a wireless system introduces many questions: What will it feel like? Will it change my sound? Relay G30 sounds just like a cable, but it also sounds just like your cable. Relay G30 features two EQ settings that match the frequency responses of typical guitar cables. Different players use different cables, but all players can use Relay G30.
VWT
Exclusive VWT (Virtual Wire Transmission) technology ensures full-range frequency response, excellent transient response, and wide dynamic range - just like a high-quality guitar cable.
Superior Specs
Relay digital wireless systems produce full-range tones with 10Hz-20kHz frequency response, exceedingly low noise with up to 120dB dynamic range, and studio-quality resolution with 24-bit A/D conversion. (Comparably priced analog wireless systems offer 50Hz-15kHz frequency response and >90dB dynamic range. This wreaks havoc on your tone, especially if you use a high-gain amp.)
Cable Tone Simulation
Using a cable and a wireless system? Now you can switch back and forth without having to adjust the tone settings on your amplifier. Relay digital wireless systems feature a Cable Tone Simulator, which lets you match the sound of your Relay to the sound of your cable.
Compander-Free
Companders squash your signal and ruin your tone. Analog wireless systems require companders but Relay wireless systems do not. Remaining compander-free enables Relay to deliver a beautiful high-end sparkle, thunderous low-end punch, and touch response that analog wireless systems simply cannot deliver.
Remaining compander-free gives better sound than analog wireless systems.
DCL
Exclusive DCL (Digital Channel Lock) technology automatically locks out all sources of interference. The only sound that will come out of your amplifier is you--not static, not Top 40 radio--just you.
2.4GHz broadcast
The best way to avoid interference? Don't get in its way. Relay digital wireless systems broadcast in the 2.4GHz band, which successfully avoids interference caused by TV stations, public safety broadcasts, cell phone towers, and other high-powered sources.
What About WiFi?
Worried about interference caused by 2.4GHz WiFi networks and Bluetooth devices? Don't be. Relay digital wireless systems use uniquely addressed and encoded digital transmission technology. Your tone will make it from your transmitter to your receiver free of interference.
![]() Don't waste time scanning for open channels. |
Full Quality, No Matter What
Whether you're playing two feet from your Relay G30 or at the edge of its range, you get the same great specs: full frequency response, superior dynamic range, cable-inspired dependability, and 24-bit A/D conversion.
All Channels, All the Time
All channels in all Relay digital wireless systems work all the time. Too good to be true? Maybe for an analog wireless system. Relay digital wireless systems are different. There's no website to reference, and no need to scan for open channels.
- 30-meter range, line-of-sight
- Broad 10Hz – 20kHz frequency response; Superior 118 dB dynamic range, 8 hours of battery life (AA alkaline batteries)
- Comes complete with transmitter, receiver (Rugged polycarbonate shell) and all necessary accessories including cable, power supply and batteries
- 2.4GHz band is optimal for guitar wireless, approved for use in Europe, South America, Asia and Australia.
- Encrypted data stream for added signal protection; Simultaneous broadcasts on six channels
User questions & answers
Question: | How long is the 1/4" cable that is included |
Answer: | Why wouldn't you, it's a GUITAR strap, and an acoustic is a GUITAR.... Don't listen to the dum dum who said it is made for electric guitars, as they are obviously clueless. |
Question: | Does the transmitter make any pop sound when you turn ON or OFF the power switch? This is important since it doesn't have a mute button like the G |
Answer: | It's a light purple sort of neon like but definitely not a wine color |
Question: | I'm looking at using this with an acoustic electric bass. I see lots of comments about how great it makes guitars sound, but nothing about a bass |
Answer: | They sure are. These come 100% ready to bolt on. The strap screws are slightly larger that the factory screws so screw them in slowly. |
Question: | Will the g30 work in usa and does it do good with a bottom b bass string |
Answer: | Depends on the shape of your guitar. I have a long (extra connector pack purchased separately) & short combo on the neck heel/ lower body of my SG and the neck strap sits on the horn and the lower sits on the body while in the case. It hasn't hurt anything. |
Product description
A reliable and affordable solution for the most demanding wireless applications
The Nady ENC DUET Wireless Instrument / Guitar System is a professional VHF wireless system packed with all the features you would expect from one of the most trusted and respected wireless brands on the market today. The Nady ENC DUET Wireless System consists of a half-rack receiver with folding front-panel dual antennas that gives you clear channel VHF operation for optimum interference-free performance. This system includes a ENC DUET receiver, WLT-15 bodypack transmitters, and IC-U2 ¼-inch locking guitar cables.Specifications
OVERALL SYSTEMOperating Frequency Range: 169-216 MHz (VHF, Dual Band)
Frequency Response: 30Hz - 18KHz, +/-dB
Dynamic Range: 120dB
Frequency Stability: +/- 0.005%. crystal controlled
Operating Range: Up to 250ft. typical; up to 500ft.
ENC DUET WIRELESS RECEIVER
Controls: Power On/Off, Volume Control, Squelch (Mute) Adjust
Squelch: External Control, Tone Key (30.720KHz)
Connectors: DC in, ¼-inch unbalanced output, XLR balanced outputs
LED indicators: Power on, Audio Peak
Power requirements: DC 15V @ 300mA, AC/DC adapter included
Controls: Power/Mute On/Off
LED Indicator: Unit "ON" (Single Flash Red), Low Battery Alert (Continuous Red)
RF power out: 50mW
Battery Type: 9V Alkaline
Battery Life: 8-10 hours
- A full set of professional features. Unsurpassed state-of-the-art VHF performance with operation up to 500 feet line-of sight
- Proprietary companding and low-noise circuitry for an amazing 120dB dynamic range
- Half-rack receiver design with folding front panel dual antennas
- Durable WLT-15 bodypack transmitters w/ locking 3.5mm jack ensures secure connection and dependable operation
- This is a single fixed-frequency wireless system. Please consult the manufacturer to confirm compatibility when attempting to use two or more of this system simultaneously or use it with other wireless systems.
User questions & answers
Question: | is there a headset microphone that works with this receiver |
Answer: | Hello Robin, Thank you for your question! YES! This system will work great with a bass guitar! Just keep in mind that if your guitar has active pickups like many basses do, you'll need a custom high-resistance cable from Nady to reduce gain. Just give them a shout from their contact info on the Nady Systems website! Best Regards, SG4L Support |
Question: | Will this work with bass guitars |
Answer: | Eddie,Yes, they can. Both body pack transmitters operate on two individualized channels that will not interfere with each other. This is a great wireless system for guitar players who have multiple guitars or a band with two guitar players. We hope this information helps you out! |
Question: | can both transmitter be use simultaneously |
Answer: | Thank you for your question. The included power supply adapter is rated to accept an input of AC 120V at 60 Hz (North America), and outputs 13.5VDC 300mA via a standard 2.5mm DC coaxial connector. |
Question: | What is the voltage of the provided ac/dc adapter |
Answer: | no. ac input only |
Product description
Have you always dreamed about going wireless with your instrument, but were put off by the complicated setup, tone loss, and bulky adds-ons? If so, the WL-20 Series is for you! Driven by new lightning-fast BOSS tech, these ultra-compact music Tools deliver premium sound and plug-and-play operation that completely eliminates all the hassles normally associated with wireless systems. Once you experience the easy wireless independence provided by the WL-20 Series, you’ll never go back to using a standard cable again! With no worries about cable management, you’re able to move about freely while playing at home, jamming with friends, and performing on Stage. During sound check at a gig, You can listen to your tone out front and dial in the best sound for your audience. And with the ability to roam and interact with other musicians, your live shows will be more dynamic and entertaining than ever.
- Plug-and-play wireless systems for guitar, bass, and other electronic instruments
- No complicated setup required—simply Dock the transmitter and receiver together for about 10 seconds to set the optimum wireless Connection
- Newly developed BOSS technology delivers premium audio performance with rock-solid stability, ultra-low latency (2.3 ms), and 50-foot/15-meter range (line-of-sight Propagation)
- Built-in rechargeable batteries provide up to 12 hours of continuous playing time
- Simple charging with a standard USB adaptor (5 V/500 mA or greater)
- Cable tone simulation reproduces the natural capacitive effect of a 10-foot/3-meter guitar cable (WL-20 model only)
- Spare wl-t transmitter available separately
User questions & answers
Question: | Which end provides the "cable tone simulation", transmitter or receiver |
Answer: | Yes, this guitar system support on 4 channels.As long as your two sets match well and not at the same channel, there will be no interference. |
Question: | So there is no need for "channels |
Answer: | I have not tried that but believe that would be doable. I wouldn’t use the same model for both Guitar and mixer to speakers. I would be concerned with system issues. I have several different brands and find I can mix them with other instruments without any interference. Overall these are really great at a reasonable price. I have used more expensive and bulkier units that didn’t work as well. |
Question: | What is the case made of? Plastic or metal |
Answer: | Yes in fact I have a number of other 2.4 ghz wireless systems that don't work with active pickups? These work perfectly with all my instruments with active pickups...Even my Uke with my LR Baggs Five O pickups did not work with any other wireless but my Lekato's do. These are also my go to devices to daisy chain powered speakers and sending aux mixes to house sound systems...$58. an amazing deal. |
Question: | What are the actual latency specs |
Answer: | Not tried that |
Product features
WL-20/WL-20L Wireless System
Have you always dreamed about going wireless with your instrument, but were put off by the complicated setup, tone loss, and bulky adds-ons? If so, the WL-20 series is for you! Driven by new lightning-fast BOSS tech, these ultra-compact music tools deliver premium sound and plug-and-play operation that completely eliminates all the hassles normally associated with wireless systems. The built-in rechargeable batteries provide up to 12 hours of continuous playing time and can be charged with a standard USB adaptor (5 V/500 mA or greater).
Once you experience the easy wireless independence provided by the WL-20 series, you’ll never go back to using a standard cable again! With no worries about cable management, you’re able to move about freely while playing at home, jamming with friends, and performing on stage.
Lightning-Fast BOSS Wireless Technology
Equipped with high-performance BOSS wireless technology that debuted in the Katana-Air wireless guitar amp, the WL-20 series delivers exceptional sound quality with wide dynamic range. Working in the 2.4 GHz frequency band, the optimum channel is set automatically to ensure rock-solid audio performance with absolutely no drop-outs. And with ultra-low latency of just 2.3 ms, you’ll always enjoy great playing feel with no lag whatsoever. Up to 14 BOSS wireless systems can be used simultaneously in one space, allowing multiple musicians to enjoy wireless freedom at the same time.
Automatic Wireless Setup: Just Plug In and Rock!
With the WL-20 series, there’s no fiddly channel setup required. A WL-20 system is literally as simple to use as a standard guitar cable. The small transmitter plugs into your instrument, while a matching receiver plugs into a pedal or amp. Just dock the transmitter and receiver together for about 10 seconds to automatically set the optimum connection. That’s it!
During sound check at a gig, you can listen to your tone out front and dial in the best sound for your audience. And with the ability to roam and interact with other musicians, your live shows will be more dynamic and entertaining than ever.
WL-20: Built-In Cable Tone Simulation
If you play a guitar or bass with standard passive pickups (the most common pickup type), the WL-20 model is probably your best choice. It includes built-in cable tone simulation, which reproduces the natural capacitive effect that’s introduced when using a 10-foot/3-meter guitar cable with passive pickups. This effect rolls off the treble very slightly, giving you the warm tone you’re used to hearing with a normal cable.
WL-20L: No Cable Tone Simulation
The WL-20L model is functionally identical to the WL-20, with the exception that it eliminates cable tone simulation. This makes it the best choice for instruments where cable capacitance has little or no effect on the tone, such as an acoustic/electric guitar with an onboard preamp, a guitar or bass with active pickups, or a line-level device like a keytar or Roland’s Aerophone digital wind instrument. The WL-20L also works great with passive pickups if you don’t need the subtle treble roll-off provided by cable tone simulation.
Product description
The Relay G10S guitar wireless system is as powerful as it is compact. The stompbox-sized pedal offers professional features, rugged build quality, and plug-and-play operation at an easily affordable price. The Relay G10S system integrates seamlessly into any pedalboard or can function as a standalone unit. It features an impressive range of up to 130’ line-of-sight, enabling you to move about untethered on any sized stage—and the Relay G10S works equally well with bass. The Relay G10S is the newest member of the relay wireless family, a series of products that are embraced by professionals for their reliability, ease of use, and transparent sound. Thanks to the extensive experience that Line 6 brings to designing and manufacturing wireless products, you can depend on the Relay G10S to provide clear and accurate instrument sound, free from interference. Plus, the Relay G10S is compatible with the relay G10, G30, G50, G55, and G90 guitar wireless systems.
- 24-Bit lossless digital sound quality
- Up to 130' Range line-of-sight
- 9V DC power supply included
- Automatic or manual frequency selection
- Balanced XLR DI and 1/4" Outputs
- No setup required
- G10T transmitter with rechargeable battery included
User questions & answers
Question: | If i set up, for example 4 guitars on stage, can I have 4 recievers plugged into each guitar at once ? Will I be able to play them separately |
Answer: | It has a mini-din connection just like what you would plug into the back of a computer. Course you can buy connectors for anything and no it doesn't play out of both speakers, just one speaker will have the sound. Still a good little basic metronome. I've moved on to the Korg MA-1 and I like that one also. |
Question: | Can you charge one transmitter while using a second transmitter |
Answer: | /Duration 0:06Loaded: 0.00%Stream Type LIVESeek to live, currently playing liveLIVERemaining Time -0:06 Playback Rate1xChaptersChaptersDescriptionsdescriptions off, selectedCaptionscaptions off, selectedAudio TrackFullscreenThis is a modal window. .noScriptDisplayLongText { display : none; } .noScriptNotDisplayExpander { display : none; } .noScriptDisplayLongText { display : block; } hopefully you can freeze the video and expand, I could not upload a pic for some reason |
Question: | I read one ding in the reviews, but does anyone else play an instrument with onboard active electronics through the G10S |
Answer: | mine only came with 1 |
Question: | Does the base unit have any option for battery |
Answer: | All of the features must be manually adjusted. The tempo will not increase or decrease automatically. Not quite that sophisticated. |
Product features
Easy To Use
Getting up and running with the Relay G10S is simply a matter of turning it on - no complicated setup required. When the transmitter is docked, the unit immediately locates and locks onto the strongest available wireless frequencies. You can also adjust the frequency selection manually, although you'll probably never need to.
Pro Outputs
Relay G10S is equipped with two different outputs, making it extremely versatile. In addition to a standard 1/4" jack for connecting it to your pedalboard or amp, there's also a balanced XLR output that allows the G10S to be used as a wireless DI box for applications such as connecting acoustic guitars or basses directly to a P.A.
Versatile Power Options
The Relay G10S includes a convenient 9V DC power input, enabling you to connect it to either the included power adapter, or your pedalboard's power supply. The G10T transmitter runs on a rechargeable battery that lasts for six hours. What's more, the battery automatically enters sleep mode when you're not playing, significantly extending how much playing time you can get from a single charge. When you're ready to recharge, just plug the G10T into the Relay G10S receiver and it automatically begins recharging.
Crystal Clear Sound Quality
Relay G10S offers pristine, 24-bit lossless digital audio quality. It's equipped with Cable Tone, a proprietary Line 6 technology that matches the sound and response of an actual guitar cable for additional realism.
Designed For Performance
The Relay G10S is the newest member of the Relay Wireless Family, a series of products that are embraced by professionals for their reliability, ease of use, and transparent sound. Thanks to the extensive experience that Line 6 brings to designing and manufacturing wireless products, you can depend on the Relay G10S to provide clear and accurate instrument sound, free from interference. While some wireless products in this range are housed in plastic, the G10S features a rugged metal housing designed to withstand the rigors of gigging. The RF and battery status indicators are conveniently located on the face of the pedal, making it easy to monitor system status at a glance.
Plus, the Relay G10S is compatible with the Relay G10, G30, G50, G55, and G90 guitar wireless systems.
Latest Reviews
View all
Hardside Luggages
- Updated: 18.05.2023
- Read reviews

Dog Books
- Updated: 22.05.2023
- Read reviews

Mole Remover
- Updated: 25.07.2023
- Read reviews

Wood Deck Sealers
- Updated: 21.02.2023
- Read reviews

Pueraria Mirificas
- Updated: 04.02.2023
- Read reviews