7 best audio technica wireless mics

Product description

Audio-Technica’s second-generation 2000 Series is a 10-channel frequency-agile UHF wireless system designed to suit a variety of applications, including MI/live performance, fixed installation, public address, A/V rental houses and places of worship. It offers all the advantages of a high-quality, professional wireless system at an extremely affordable price. New professional features include two available frequency bands and switchable antenna power. Also new to the 2000 Series, the optional ATW-CHG2 two-bay recharging station provides power to recharge NiMH batteries in two ATW-T220a handheld transmitters and/or ATW-T210a UniPak transmitters in any combination. Offering 10 selectable channels in one of two UHF frequency ranges and True Diversity UHF wireless technology, the 2000 Series features automatic frequency scanning. At the touch of a button, this function automatically determines and sets the best available frequency. Any of the 2000 Series’ 10 channels may be used together without any frequency coordination problems or group selection issues. The 2000 Series also incorporates Audio-Technica’s Tone Lock squelch plus an easy-to-read LCD information display.

• Serious advances in affordable professional wireless
• Clear sound quality and rock-solid, dependable performance
• Automatic frequency scanning
• 10 compatible user-switchable channels in one of two UHF frequency ranges
• Includes ATW-R2100a receiver and ATW-T220a handheld cardioid dynamic microphone/transmitter
• I Band Frequency: 487.125-506.500 MHz (TV 16-20)

User questions & answers

Product description

The Audio-Technica atw-t1002 system 10 handheld unidirectional microphone/Transmitter is a digital high-fidelity wireless transmitter designed to provide performing musicians and presenters with advanced 24-bit operation, easy setup and clear, natural sound quality. Operating in the 2.4 GHz range, far from TV and DTV interference, This digital transmitter offers easy operation. It also offers an easy-to-read digital ID display. The system 10 wireless transmitter ensures clear Communications by providing 3 levels of diversity assurance: frequency, time and space. Frequency diversity sends the signal on 2 dynamically allocated frequencies for interference-free communication. Time diversity sends the signal in multiple time slots to maximize immunity to Multipath interference. Finally, space diversity uses 2 antennas on the transmitter and receiver (sold separately) to maximize signal integrity. The atw-t1002 handheld transmitter features a unidirectional dynamic microphone element and has a power/mute switch, as well as an adjustable input level control. Features: digital 24-bit/ 48 kHz wireless operation for high-quality sound and dependable performance 2.4 GHz range - completely free from TV interference three levels of diversity assurance: frequency, time and space unidirectional dynamic microphone power/mute/battery indicator shows operation status and lets you know when batteries are low, dead or installed incorrectly adjustable input level control with included Transmitter screwdriver transmitter pairing switch and system ID display for pairing The transmitter with a receiver Power/mute button allows toggling between muted and unmuted operation via a single touch specifications: Operating frequency: 2.4 GHz ISM band dynamic range: > 109 dB (A-weighted), typical TOTAL harmonic distortion: < 0.05% typical operating range: 100' (30 m) typical frequency response: 20 Hz to 20 kHz audio sampling: 24 bit/ 48 kHz RF output power: 10 mW Spurious Emission: following federal and national regulations battery requirement: two 1.5 V AA (not included) Battery life: > 7 hours (alkaline) operating temperature: 32 to 104deg.F (0 to 40deg.C) dimensions (diameter): 10.03 x 1.97" (254.80 x 50.03mm) Weight: without batteries: 9.9oz (280.66G).

• The Audio-Technica atw-t1002 system 10 handheld unidirectional microphone/transmitter is a digital high-fidelity wireless transmitter designed to provide performing musicians and presenters with advanced 24-bit operation, easy setup and clear, natural sound quality. Operating in the 2.4 GHz range, far from TV and DTV interference, this digital transmitter offers easy operation. It also offers an easy-to-read digital ID display. The system 10 wireless transmitter ensures clear Communications by providing 3 levels of diversity assurance: frequency, time and space. Frequency diversity sends the signal on 2 dynamically allocated frequencies for interference-free communication. Time diversity sends the signal in multiple time slots to maximize immunity to Multipath interference. Finally, space diversity uses 2 antennas on the transmitter and receiver (sold separately) to maximize signal integrity. The atw-t1002 handheld transmitter features a unidirectional dynamic microphone element and has a power/mute switch, as well as an adjustable input level control. Features: digital 24-bit/ 48 kHz wireless operation for high-quality sound and dependable performance 2.4 GHz range - completely FREE from TV interference three levels of diversity assurance: frequency, time and space unidirectional dynamic microphone power/mute/battery indicator shows operation status and lets you know when batteries are low, dead or installed incorrectly adjustable input level control with included Transmitter screwdriver transmitter pairing switch and system ID display for pairing The transmitter with a receiver Power/mute button allows toggling between muted and unmuted operation via a single touch specifications: Operating frequency: 2.4 GHz ISM band dynamic range: > 109 dB (A-weighted), typical total harmonic distortion: 7 hours (alkaline) operating temperature: 32 to 104deg.F (0 to 40deg.C) dimensions (diameter): 10.03 x 1.97" (254.80 x 50.03mm) Weight: without batteries: 9.9oz (280.66G)

User questions & answers

Product description

Audio-Technica system 9 is a four-channel frequency-agile wireless system designed to provide rock-solid performance Along with easy setup and clear, natural sound quality. Featuring sleek, stackable, contemporary styling, system 9 is available in handheld, head worn, guitar, lavalier and body-pack configurations. The system offers four compatible user-switchable VHF channels (169.505, 170.245, 171.045, and 171.905 MHz). each system 9 configuration includes the atw-r900 receiver and either a body-pack transmitter or handheld microphone/transmitter. The atw-r900 is a non-diversity, single-channel receiver with advanced dipole antenna design for extended operating range, which improves operation by providing a ground element in addition to the usual signal element. The atw-r900 also offers volume control along with AF peak, RF and power indicator lights. Features: easy operation and clear, natural sound quality 4 selectable frequency-coordinated VHF channels balanced XLR and unbalanced 1/4¡ output jacks enable use with a wide variety of audio gear reliable performance and durable construction advanced dipole antenna system for extended operating range specifications: operating frequencies: VHF high band, 169 MHz to 172 MHz modulation mode: FM maximum Deviation: +/-10 kHz dynamic range: >/=90 dB (a-weighted), typical TOTAL harmonic distortion: <1% (at 1 kHz, +/-10 kHz Deviation) operating range: 200' (60 M) typical open range environment with no interfering signals operating temperature range: 40° F (4° C) to 110° F (43° C) battery performance may be reduced at very low temperatures frequency response: 80 Hz to 13 kHz.

• Audio-Technica system 9 is a four-channel frequency-agile wireless system designed to provide rock-solid performance Along with easy setup and clear, natural sound quality. Featuring sleek, stackable, contemporary styling, system 9 is available in handheld, head Worn, guitar, lavalier and body-pack configurations. The system offers four compatible user-switchable VHF channels (169.505, 170.245, 171.045, and 171.905 MHz). each system 9 configuration includes the atw-r900 receiver and either a body-pack transmitter or handheld microphone/transmitter. The atw-r900 is a non-diversity, single-channel receiver with advanced dipole antenna design for extended operating range, which improves operation by providing a ground Element in addition to the usual signal Element. The atw-r900 also offers volume control along with AF peak, RF and power indicator lights. Features: easy operation and clear, natural sound quality 4 selectable frequency-coordinated VHF channels balanced XLR and unbalanced 1/4¡ output jacks enable use with a wide variety of audio gear reliable performance and durable construction Advanced dipole antenna system for extended operating range specifications: operating frequencies: VHF high band, 169 MHz to 172 MHz modulation Mode: FM maximum deviation: +/-10 kHz dynamic range: >/=90 dB (a-weighted), typical total harmonic distortion: <1% (at 1 kHz, +/-10 kHz deviation) operating range: 200' (60 m) typical open range environment with no interfering signals operating temperature range: 40° F (4° C) to 110° F (43° C) battery performance may be reduced at very low temperatures frequency response: 80 Hz to 13 kHz

User questions & answers

Product description

Audio-Technica's 2000 Series is a 10-channel frequency-agile UHF wireless system designed to suit a variety of applications, including MI/live performance, fixed installation, public address, A/V rental houses and places of worship. It offers all the advantages of a high-quality, professional wireless system at an extremely affordable price. Features include two available frequency bands and switchable antenna power. Offering 10 selectable channels in one of two UHF frequency ranges and True Diversity UHF wireless technology, the 2000 Series features automatic frequency scanning. At the touch of a button, this function automatically determines and sets the best available frequency. Any of the 2000 Series' 10 channels may be used together without any frequency coordination problems or group selection issues. The 2000 Series also incorporates Audio-Technica's Tone Lock squelch plus an easy-to-read LCD information display. ATW-R2100b Frequency-agile True Diversity UHF Receiver Features: High sensitivity dual IF receiving design for dropout-free performance Automatic frequency scanning finds open channel High efficiency compander for flawless audio 10 compatible user-switchable channels in one of two UHF frequency ranges Antenna power available for powered antennas & other in-line RF devices Receiver internal function menu with soft-touch controls Straightforward channel selection process Digital Tone Lock squelch Adjustable receiver squelch True Diversity receiver with silent, automatic switching Tuner operation indicator displays tuner with strongest reception Receiver front panel displays for RF and AF signal levels AC or 12-18 V DC operation Rear panel or front panel antenna mount options Balanced and unbalanced outputs Output level control on the rear panel Ground lift switch on balanced output Rugged metal receiver construction Mounts in a single rack space (1 or 2 units) Clear sound quality, rock solid, dependable performance The ATW-R2100b is a True Diversity UHF wireless receiver operating in the UHF bands of 656.125-678.500 or 487.125-506.500 MHz. The automatic frequency scanning eliminates the need for searching for clear channels and automatically selects the most appropriate frequency for the area in which the wireless is operating. A pre-coordinated integral channel plan allows for simultaneous operation of any of the ten channels in a given location. The flexibility in programming both the receiver and transmitters eliminates confusing frequency groups and other frequency coordination problems. A two-position switch turns on/off 12V AC antenna power for use with powered antennas or accessories. Advanced Tone Lock adjustable squelch system fights interference. High sensitivity dual IF design using true diversity operation with silent automatic switching provides dropout-free performance. Front panel LCD receiver display provides continuous indication of transmitter RF signal strength, selection of internal dual (True Diversity) receiving sections (A&B), along with the audio modulation level of the received signal Both balanced XLR-type and unbalanced 1 /4" output connections with output gain adjustments are located on the rear panel. The XLR-type output includes a ground lift switch to prevent ground loops. Features not often found in other receivers include metal receiver construction, detachable wave receiver antennas, AC or 12-18V DC operation, front panel power switch and included rack mount kit. ATW-T210a Frequency-agile UHF UniPak Body-pack Transmitter Features: Rugged housing with a reversible clothing clip Recessed locking HRS-type microphone input connector LED "on" indicator 10 compatible user-switchable channels in one of two UHF frequency ranges Microphone or line input with DC bias voltage Internal channel selector switch Internal trim controls for mic and line inputs Integrated two-position top-mounted power/mute switch Digital Tone Lock to identify the wireless transmitter to the receiver Operates on two AA batteries Field replaceable whip antenna The ATW-T210a wireless UniPak body-pack transmitter has both low- and high-impedance input connections along with a DC bias voltage connection for use with dynamic and electret condenser microphones as well as Hi-Z instrument pickups. Separate input trim controls are provided for each input along with a ten-position channel selector switch. All adjustment controls are hidden behind the transmitter's battery door and an adjustment tool is provided with the transmitter. A locking 4-pin HRS-type input connector is provided for both inputs. The connector is recessed to protect the connection and input cable. Sophisticated Tone Lock tone squelch eliminates the need for a separate mute button allowing the two-position, positive-action mechanical switch to function for both power and mute. The switch is located on the top of the transmitter for easy access and can be operated without looking at the transmitter. An RF power select switch offers high and low settings. A battery condition indicator shows that the batteries are good. The transmitter operates on two standard AA batteries providing over eight hours of continuous operation. Constructed of rugged high-impact materials, the transmitter incorporates a latching captive battery door, field replaceable antenna and reversible belt clip. AT829cW Cardioid Condenser Wireless Lavalier Microphone The AT829cW is a wireless clip-on/lavalier condenser microphone with a cardioid polar pattern. It is designed for professional business presentations, public speaking and theater performances. The microphone is intended to be worn on the clothing for excellent yet unobtrusive sound pickup. The wide-range capability of the microphone ensures clean, accurate reproduction with high intelligibility for speakers, presenters and other performers. The microphone's cardioid polar pattern provides a 120deg. angle of acceptance. The microphone includes a 1.4 m (55") permanently attached miniature cable. Its free end terminates in a locking 4-pin connector for use with Audio-Technica UniPak body-pack transmitters. The microphone comes equipped with a clothing clip and a windscreen. Ideal for professional business presentations, public speaking, theater performances Clip-on lavalier mic provides crisp, full-sounding voice pickup Excellent gain before feedback and suppression of background noise Rugged design and construction for reliable performance Terminated for use with all Audio-Technica UniPak wireless systems Operation: For use as a lavalier, attach the microphone about six inches below the chin. Anticipate movements that may cause the microphone to rub against or be covered by clothing and position the microphone to avoid it. The provided foam windscreen simply slips over the head of the microphone, effectively reducing wind noise and popping. Avoid leaving the microphone in the open sun or in areas where temperatures exceed 110deg. F (43deg. C) for extended periods. Extremely high humidity should also be avoided. Specifications: System: UHF operating frequencies: Band I: 487.125-506.500 MHz, 10 channels System: Modulation mode: FM System: Maximum deviation: +/-40 kHz System: Dynamic range: > 110 dB (A-weighted), typical System: Total harmonic distortion: < 1% (at 1 kHz, +/-20 kHz deviation) System: Operating range: 100m (328.08'), typical (open range environment with no interfering signals) System: Operating temperature range: 5 to 45 deg. C (41 to 113 deg. F) (battery and LCD performance may be reduced at very low temperatures) System: Frequency response: 100 Hz to 15 kHz (+1 dB, -3 dB) Receiver: Receiving system: True diversity Receiver: Image rejection: 60 dB nominal, 55 dB minimum Receiver: RF Sensitivity: 20 dBuV at 60 dB S/N ratio (50Ohms termination) Receiver: Maximum output level: XLR, balanced: +9 dBV. 1/4" (6.3 mm), unbalanced:+4 dBV Receiver: Balanced audio o/p attenuator: Two position switch: 0/-12 dB Receiver: Antenna input: BNC-type, 50Ohms. Bias voltage 12V DC, 60 mA, each Receiver: Power requirements: 12-18V DC, 500 mA Transmitter: RF power output: High: 30 mW, Low: 10 mW (50Ohms) Transmitter: Spurious emissions: Following federal and national regulations Transmitter: Input connection: Four-pin locking connector. Pin 1: GND. Pin 2: INST INPUT. PIN 3: MIC INPUT. PIN 4: DC BIAS +9V. Transmitter: Batteries: Two 1.5V AA alkaline or two 1.2V AA NiMH Transmitter: Battery life: High: 7 hours (alkaline), Low: 9 hours (alkaline) Depending on battery type and use pattern Microphone Element: Condenser Microphone Polar Pattern: Cardioid Microphone: Cable: 1.4m (4.59'), terminated for use with Audio-Technica UniPak body-pack transmitters Dimensions (W x D x H): Transmitter: 66.0 x 22.5 x 92.3mm (2.60 x 0.89 x 3.63"). Receiver: 210.0 x 162.2 x 44.0mm (8.27 x 6.39 x 1.73") (not including BNC connectors or feet) Weight: Transmitter: 81g (2.86oz) without batteries. Receiver: 1.0kg (2.20lbs) without accessories

• Audio-Technica's 2000 Series is a 10-channel frequency-agile UHF wireless system designed to suit a variety of applications, including MI/live performance, fixed installation, public address, A/V rental houses and places of worship. It offers all the advantages of a high-quality, professional wireless system at an extremely affordable price. Features include two available frequency bands and switchable antenna power. Offering 10 selectable channels in one of two UHF frequency ranges and True Diversity UHF wireless technology, the 2000 Series features automatic frequency scanning. At the touch of a button, this function automatically determines and sets the best available frequency. Any of the 2000 Series' 10 channels may be used together without any frequency coordination problems or group selection issues. The 2000 Series also incorporates Audio-Technica's Tone Lock squelch plus an easy-to-read LCD information display. ATW-R2100b Frequency-agile True Diversity UHF Receiver Features: High sensitivity dual IF receiving design for dropout-free performance Automatic frequency scanning finds open channel High efficiency compander for flawless audio 10 compatible user-switchable channels in one of two UHF frequency ranges Antenna power available for powered antennas & other in-line RF devices Receiver internal function menu with soft-touch controls Straightforward channel selection process Digital Tone Lock squelch Adjustable receiver squelch True Diversity receiver with silent, automatic switching Tuner operation indicator displays tuner with strongest reception Receiver front panel displays for RF and AF signal levels AC or 12-18 V DC operation Rear panel or front panel antenna mount options Balanced and unbalanced outputs Output level control on the rear panel Ground lift switch on balanced output Rugged metal receiver construction Mounts in a single rack space (1 or 2 units) Clear sound quality, rock solid, dependable performance The ATW-R2100b is a True Diversity UHF wireless receiver operating in the UHF bands of 656.125-678.500 or 487.125-506.500 MHz. The automatic frequency scanning eliminates the need for searching for clear channels and automatically selects the most appropriate frequency for the area in which the wireless is operating. A pre-coordinated integral channel plan allows for simultaneous operation of any of the ten channels in a given location. The flexibility in programming both the receiver and transmitters eliminates confusing frequency groups and other frequency coordination problems. A two-position switch turns on/off 12V AC antenna power for use with powered antennas or accessories. Advanced Tone Lock adjustable squelch system fights interference. High sensitivity dual IF design using true diversity operation with silent automatic switching provides dropout-free performance. Front panel LCD receiver display provides continuous indication of transmitter RF signal strength, selection of internal dual (True Diversity) receiving sections (A&B), along with the audio modulation level of the received signal Both balanced XLR-type and unbalanced 1 /4" output connections with output gain adjustments are located on the rear panel. The XLR-type output includes a ground lift switch to prevent ground loops. Features not often found in other receivers include metal receiver construction, detachable wave receiver antennas, AC or 12-18V DC operation, front panel power switch and included rack mount kit. ATW-T210a Frequency-agile UHF UniPak Body-pack Transmitter Features: Rugged housing with a reversible clothing clip Recessed locking HRS-type microphone input connector LED "on" indicator 10 compatible user-switchable channels in one of two UHF frequency ranges Microphone or line input with DC bias voltage Internal channel selector switch Internal trim controls for mic and line inputs Integrated two-position top-mounted power/mute switch Digital Tone Lock to identify the wireless transmitter to the receiver Operates on two AA batteries Field replaceable whip antenna The ATW-T210a wireless UniPak body-pack transmitter has both low- and high-impedance input connections along with a DC bias voltage connection for use with dynamic and electret condenser microphones as well as Hi-Z instrument pickups. Separate input trim controls are provided for each input along with a ten-position channel selector switch. All adjustment controls are hidden behind the transmitter's battery door and an adjustment tool is provided with the transmitter. A locking 4-pin HRS-type input connector is provided for both inputs. The connector is recessed to protect the connection and input cable. Sophisticated Tone Lock tone squelch eliminates the need for a separate mute button allowing the two-position, positive-action mechanical switch to function for both power and mute. The switch is located on the top of the transmitter for easy access and can be operated without looking at the transmitter. An RF power select switch offers high and low settings. A battery condition indicator shows that the batteries are good. The transmitter operates on two standard AA batteries providing over eight hours of continuous operation. Constructed of rugged high-impact materials, the transmitter incorporates a latching captive battery door, field replaceable antenna and reversible belt clip. AT829cW Cardioid Condenser Wireless Lavalier Microphone The AT829cW is a wireless clip-on/lavalier condenser microphone with a cardioid polar pattern. It is designed for professional business presentations, public speaking and theater performances. The microphone is intended to be worn on the clothing for excellent yet unobtrusive sound pickup. The wide-range capability of the microphone ensures clean, accurate reproduction with high intelligibility for speakers, presenters and other performers. The microphone's cardioid polar pattern provides a 120deg. angle of acceptance. The microphone includes a 1.4 m (55") permanently attached miniature cable. Its free end terminates in a locking 4-pin connector for use with Audio-Technica UniPak body-pack transmitters. The microphone comes equipped with a clothing clip and a windscreen. Ideal for professional business presentations, public speaking, theater performances Clip-on lavalier mic provides crisp, full-sounding voice pickup Excellent gain before feedback and suppression of background noise Rugged design and construction for reliable performance Terminated for use with all Audio-Technica UniPak wireless systems Operation: For use as a lavalier, attach the microphone about six inches below the chin. Anticipate movements that may cause the microphone to rub against or be covered by clothing and position the microphone to avoid it. The provided foam windscreen simply slips over the head of the microphone, effectively reducing wind noise and popping. Avoid leaving the microphone in the open sun or in areas where temperatures exceed 110deg. F (43deg. C) for extended periods. Extremely high humidity should also be avoided. Specifications: System: UHF operating frequencies: Band I: 487.125-506.500 MHz, 10 channels System: Modulation mode: FM System: Maximum deviation: +/-40 kHz System: Dynamic range: > 110 dB (A-weighted), typical System: Total harmonic distortion: < 1% (at 1 kHz, +/-20 kHz deviation) System: Operating range: 100m (328.08'), typical (open range environment with no interfering signals) System: Operating temperature range: 5 to 45 deg. C (41 to 113 deg. F) (battery and LCD performance may be reduced at very low temperatures) System: Frequency response: 100 Hz to 15 kHz (+1 dB, -3 dB) Receiver: Receiving system: True diversity Receiver: Image rejection: 60 dB nominal, 55 dB minimum Receiver: RF Sensitivity: 20 dBuV at 60 dB S/N ratio (50Ohms termination) Receiver: Maximum output level: XLR, balanced: +9 dBV. 1/4" (6.3 mm), unbalanced:+4 dBV Receiver: Balanced audio o/p attenuator: Two position switch: 0/-12 dB Receiver: Antenna input: BNC-type, 50Ohms. Bias voltage 12V DC, 60 mA, each Receiver: Power requirements: 12-18V DC, 500 mA Transmitter: RF power output: High: 30 mW, Low: 10 mW (50Ohms) Transmitter: Spurious emissions: Following federal and national regulations Transmitter: Input connection: Four-pin locking connector. Pin 1: GND. Pin 2: INST INPUT. PIN 3: MIC INPUT. PIN 4: DC BIAS +9V. Transmitter: Batteries: Two 1.5V AA alkaline or two 1.2V AA NiMH Transmitter: Battery life: High: 7 hours (alkaline), Low: 9 hours (alkaline) Depending on battery type and use pattern Microphone Element: Condenser Microphone Polar Pattern: Cardioid Microphone: Cable: 1.4m (4.59'), terminated for use with Audio-Technica UniPak body-pack transmitters Dimensions (W x D x H): Transmitter: 66.0 x 22.5 x 92.3mm (2.60 x 0.89 x 3.63"). Receiver: 210.0 x 162.2 x 44.0mm (8.27 x 6.39 x 1.73") (not including BNC connectors or feet) Weight: Transmitter: 81g (2.86oz) without batteries. Receiver: 1.0kg (2.20lbs) without accessories

Product description

Audio Technica’s System 10 is a digital high fidelity wireless system designed to provide performing musicians and presenters with advanced 24 bit operation, easy setup and clear, natural sound quality. Operating in the 2.4 GHz range, far from TV and DTV interference, System 10 offers extremely easy operation and instantaneous channel selection. Up to eight channels may be used together without any frequency coordination problems or group selection issues. System 10 receivers and transmitters offer an easy to read digital ID display. System 10 wireless ensures clear communications by providing three levels of diversity assurance: frequency, time, and space. Frequency Diversity sends the signal on two dynamically allocated frequencies for interference free communication. Time Diversity sends the signal in multiple time slots to maximize immunity to multipath interference. Finally, Space Diversity uses two antennas on each transmitter and receiver to maximize signal integrity. Featuring stackable, contemporary styling, System 10 is available in multiple system configurations, with handheld vocal microphone/transmitters and UniPak body pack transmitters designed for use with lavalier, headworn and instrument microphones as well as electric guitars. Each configuration includes the ATW R1100 receiver and either a body pack transmitter or handheld microphone/ transmitter. The ATW R1100 is a digital receiver offering volume control along with AF Peak and Pair indicator lights.

• Digital 24 bit/48 kHz wireless operation for ultimate sound quality and dependable performance
• 2.4 GHz range completely free from TV interference
• Automatic frequency selection for seamless, interference free operation
• Extremely easy operation with instantaneous channel selection, sync, and set up
• Includes ATW R1100 receiver and ATW T1001 UniPak transmitter with PRO 92cW TH headworn microphone (beige)

User questions & answers

Product description

Audio-Technica’s System 10 PRO Rack-Mount digital wireless system provides the same interference-free operation in the 2.4 GHz range (outside TV bands) as the original System 10 but with expanded features and versatility. The durable half-rack chassis is equipped to house two receiver units that can be operated locally or released from the chassis and mounted remotely (up to 328 feet away) via Ethernet cable. Up to five chassis (10 receiver units) can be linked using the RJ12 cable included with each system, creating a stable, multichannel system with the simultaneous use of up to 10 channels. Like all the products in the System 10 wireless family, the PRO Rack-Mount features 24-bit operation, easy setup, clear, natural sound quality, and three levels of diversity assurance: frequency, time, and space. Frequency Diversity sends the signal on two dynamically allocated frequencies for interference-free communication. Time Diversity sends the signal in multiple time slots to maximize immunity to multipath interference. Space Diversity uses two antennas on each transmitter and receiver unit to maximize signal integrity. Each System 10 PRO Rack-Mount system includes an ATW-RC13 receiver chassis with rack-mount adapters, one or two ATW-RU13 receiver units with corresponding AT8690 receiver unit mounting brackets, a joining plate (for dual-channel systems only), one RJ12 cable, one AC adapter, and one or two ATW-T1001 UniPak® body-pack or ATW-T1002 handheld transmitters, or one of each. Both the receiver chassis and transmitters feature easy-to-read displays

• Digital 24-bit/48 kHz wireless operation for ultimate sound quality and dependable performance
• Operates in the 2.4 GHz range – completely free from TV interference
• Receiver units can be docked in the chassis or mounted remotely (up to 328 feet away) via Ethernet cable for added versatility
• Up to five chassis (ten receiver units) can be linked and used simultaneously
• Each receiver unit can be paired with up to 10 transmitters, allowing users to instantly switch between different transmitter configurations

User questions & answers

Product description

Overview



The ATW-1102 System 10 from Audio Technica is a digital wireless handheld microphone solution that can be used for public speaking, live singing and more. The set includes the ATW-R1100 digital receiver and the ATW-T1002 handheld microphone transmitter. It uses 24 -bit, 48 kHz digital audio and operates free from TV interference in the 2.4 GHz frequency range. Built for expandability, you can use up to eight systems simultaneously. The ATW-T1002 handheld microphone transmitter features a dynamic, unidirectional element that is designed to reject sound from the back and sides of the mic. This design is ideal for stage use, helping to achieve higher gain before feedback and greater isolation for the speaker or singer. The ATW-T1002 is also equipped with a mute switch and an input level control. With a Gator Cases GM-1W Wireless Mobile Pack (Black) is a 600 denier nylon case with interior padding. It is designed to carry and protect an entire single wireless system. Plus a Watson 4-Hour Rapid Charger comes with four 1.2V, 2300mAh AA NiMH batteries that are rechargeable up to 1000 times.



In the box



Audio-Technica ATW-1102 System 10 Digital Wireless Handheld Microphone Set

User questions & answers