11 best stands with boom arms

Product description

Frameworks telescoping boom arm

• 30 Inch (762 mm) Telescoping Microphone Stand Boom
• Cable Management Included
• Length and Angle Independently Adjustable
• Heavy Duty Steel Construction

User questions & answers

Question:	What is the length when no extended
Answer:	I got a pair called Madison, and the inside was printed and the tongue was padded. I just wish they were a tiny bit wider in the toe. They hurt my toes. I’m so sad because those “Madison” shoes are super cute!
Question:	Does this screw onto a base
Answer:	I also normally wear a size 12 but Chucks are sized differently so I get 10's.

Product description

Following the success of the GFW-MIC-0821, the redesigned GFW-MIC-0822 provides a heavier, more stable base for supporting larger mics. At full extension, the GFW-MIC-0822 can hold up to 1.5lbs. It also comes equipped with a 2.5lbs counterweight to offset heavier mic loads. The stand’s low-profile range and weighted base provide the ideal solution for desktop recording scenarios, such as podcasts, broadcasts and quick vocals, as well as floor applications for miking kick/bass drums, guitar/bass amplifier cabinets, tops and bottoms of snare drums, keyboard amplifier speaker enclosures, and many more. The compact base helps to reduce the stand footprint in tight-space situations, both in the studio and on stage. The GFW-MIC-0822 includes a 27” telescoping boom arm, twist clutch height and angle adjustment, a clip for cable management, and a no-slip, vibration-reducing gasket underneath the base.

• Frameworks telescoping boom mic stand for bass drums, guitar amps and desktop recording
• Length and angle independently adjustable with cable management included
• Heavy duty steel construction with black powder coat finish and 10 lbs. base
• With 2.5 lbs. counterweight, The boom arm can hold up to a 1.5 lbs mic at full extension
• Telescopic boom arm is 27" (685mm) at max. extension
• Fits Most Popular Podcast Mics, Including Shure SM7B, Shure MV7, RODE Procaster, & RODE PodMic Models

User questions & answers

Question:	Will this fit the presonus M7 mic
Answer:	19.5 inches (49.5 cm)
Question:	What are the dimensions of the base
Answer:	Yes. It has a standard fitting for a mic base.
Question:	What is the base made out of, and how does it do with vibration? (for use on a computer desk
Answer:	White
Question:	My fifine mic has a 3/8" female adapter. this stand's mic connector has an externally threaded 5/8" thread and internal 3/8" thread. how to fit
Answer:	It should be. I generally wear 7-1/2 to an 8 and I ordered to 8..it fits great with a little room.

Product features

Soft-Grip Height Adjustment

Frameworks telescoping boom mic stand for ideal for recording, podcasts, streaming, and desktop use.

Supports Heavy Mics with Counter Weight

At full extension, the GFW-MIC-0822 can hold up to 1.5lbs. The heavy-weighted base and 2.5lbs counterweight offset heavier mic loads and provide a stable platform.

Telescoping Boom Arm

The telescoping boom arm allows independent adjustment for the perfect length and angle positioning. The boom arm is equipped to fit both US and Euro mic clips.

Soft-Grip Height Adjustment

Grab the soft-grip, ergonomic twist clutch and easily adjust the height with a simple quarter-turn. The convenient shape and texture provide the perfect grip for the active user or if you are sharing the mic with a guest.

Gator Frameworks Short Weighted Base Microphone Stand with Telescopic Boom Arm and 2.5 Lbs Counter Weight (GFW-MIC-0822)

the GFW-MIC-0822 provides a heavier, more stable base for supporting larger mics. At full extension, the GFW-MIC-0822 can hold up to 1.5lbs. It also comes equipped with a 2.5lbs counterweight to offset heavier mic loads. The stand’s low-profile range and weighted base provide the ideal solution for desktop recording scenarios, such as podcasts, broadcasts and quick vocals, as well as floor applications for miking kick/bass drums, guitar/bass amplifier cabinets, tops and bottoms of snare drums, keyboard amplifier speaker enclosures, and many more. The compact base helps to reduce the stand footprint in tight-space situations, both in the studio and on stage. The GFW-MIC-0822 includes a 27” telescoping boom arm, twist clutch height and angle adjustment, a clip for cable management, and a no-slip, vibration-reducing gasket underneath the base.

Product description

Gator Frameworks Series desktop mounted microphone boom stands are the clutter-reducing stand solutions perfectly suited for broadcasters, podcasters, content creators, radio hosts, and on-air personalities. Each boom arm includes both a clamping and mounting base attachment mechanism to best accommodate your particular setup needs and swivels a full 360-degrees. All stands are engineered specifically to reduce noise brought about from moving parts and can be adjusted to hit desired angles, providing you with quiet and easily customizable mic placement options. Concerned it won’t hold up your large-diaphragm mics? Ditch the worry, for all models are designed to bear the weight of the heaviest mics in your collection, making the desktop mic boom stand series by Gator Frameworks a group of rugged stands you can truly count on!

• Desk-Mounted Broadcast Microphone Boom Stand for Podcasts & Recording
• Spring-Loaded Articulating Arm with 2. 4 lbs. /1. 1 kg Max Weight Capacity & 38. 6“/980mm Max Extension
• Easily Mounts or Clamps to Desks, Tables & Similar-Sized Surfaces 2. 17”/55mm Max in Thickness
• Black Powder-Coated Steel Construction with Metal Coil Springs
• Standard 5/8”-27 Mic Threads for Connecting Most Podcast and Vocal Microphones, Including Shure SM7B, Shure MV7 Models

User questions & answers

Question:	Do you need to download a software and yes which one
Answer:	Hello, No - This is a microphone boom arm and requires no software to be used as intended. If you have any other questions, please reach out to us directly. Thanks!
Question:	What is the diameter of the stem that slots into the desk clamp
Answer:	It's a little over 3/8 of an inch.
Question:	i have a question with this mic arm work with the audio technica at
Answer:	Hello, Yes, an Audio Technica AT2035 should work just fine with this boom arm. If you have any questions, please reach out to us directly. Thanks!
Question:	Can I easily remove the xlr cable and replace it with my preferred cable or if the cable goes bad
Answer:	Hello, Removing the cable in this product would require knowledge of how to solder an XLR cable back together. The Cable built into this is put together inside the housing at the factory. Because of this we would not recommend trying to take this apart and remove the cable. This is an issue we are bringing up to our product team, and may be improved upon in the future. However, for now our answer remains as no. If you have any questions, please feel free to reach out to us at [email protected]. Thanks!

Product features

360-Degree Rotation

Full 360-degree rotation. Engineered to produce minimal sound when moved. (reduces the potential for interruptions during sound-sensitive recordings)

Versatile Mounting

Includes both a clamping and fixed mounting base attachment to best accommodate your particular setup needs

Threaded Mount

70mm threaded boom end with easy angle adjustment

Coated Steel

Black-powder coated steel construction with internal metal coil springs.

Gator Frameworks Deluxe Desk-Mounted Broadcast Microphone Boom Stand for Podcasts & Recording (GFWMICBCBM2000)

Gator Frameworks Series desktop mounted microphone boom stands are the clutter-reducing stand solutions perfectly suited for broadcasters, podcasters, content creators, radio hosts, and on-air personalities. Each boom arm includes both a clamping and mounting base attachment mechanism to best accommodate your particular setup needs and swivels a full 360-degrees. All stands are engineered specifically to reduce noise brought about from moving parts and can be adjusted to hit desired angles, providing you with quiet and easily customizable mic placement options. Concerned it won’t hold up your large-diaphragm mics? Ditch the worry, for all models are designed to bear the weight of the heaviest mics in your collection, making the desktop mic boom stand series by Gator Frameworks a group of rugged stands you can truly count on!

• Foldable Arm Band: The adjustable microphone arm can be folded up and easy for you to carry around. This feature enables to adjust the suitable angle and height to show your perfect voice. Before adjusting the angle of the microphone arm stand make sure to loosen the knob first. Avoid rotating it by force as it can damage the screw threads.
• Upgraded Desk Mount: In comparison to the old versions, this zinc alloy desk mount is built with anti-scratch pad and wider mouth up to 2" to fit most desktop.
• The 5/8"-27 male to 3/8"-16 female screw adapter which included in the package fits for blue snowball.The Diameter of Microphone Clip is 1.10". Suitable for any stores, families, stage, studios, broadcasting and TV stations, etc.
• Heavy Duty Steel Structure: Super-strong spring with extra positioning screw, compact microphone arm stand designed for heavy duty carry. Max load: Approx.53oz/1.5kg.
• Note: The mounting hole on the Yeti Mic is sometimes just a tiny portion bigger than the 5/8" industry standard. You are suggested to use Thread Tape (included) to wrap around the mounting screw on your shock mount. This will effectively increase the thickness of the mounting screw, while still maintaining the actual screw thread and will enable you to connect to your Yeti.

User questions & answers

Question:	Can I put an Blue Yeti upside down on this mount without falling
Answer:	Can someone show me how to mount Blue Yeti? I can't figure out how it will hold Blue yeti.
Question:	Will if work for the rode nt usb1 mic
Answer:	i believe it will. the arm has standard small threads and comes with an adapter for larger threaded mics. it also came with plumbers tape, which can be used on the threads of your arm to make it a more snug fit.
Question:	Can this hold a blue snowball mic
Answer:	Yes! Attach your Blue Snowball or Blue Yeti with the 5/8"-27 male to 3/8"-16 female threaded screw adapter included.
Question:	Does it hold the hyper x quad cast
Answer:	Can someone post a picture how to connect this microphone arm to hyper X Quad Cast ?

Product features

InnoGear Adjustable Microphone Arm Stand

This microphone arm stand is made of durable steel. Being exceptionally light in weight, its position can easily be shifted on stage or moved easily from one place to another. From setup to take down to frequent loading and unloading, the durable microphone stand performs excellently and can be transported or stored easily. Moreover, the microphone arm stand’s feet help in reducing floor vibration, promoting added stability, and protecting bare-floor surfaces from scuffs and scratches.

Easy to adjust position and angle to show your perfect voice.

Max. Microphone Clip Diameter is 1.1"/28mm.

Soft Pad can protect from scratches.

Product description

Gator Frameworks GFW-MIC-CLMPBM9 Adjustable angle clamp-on mini boom is ready to be your favorite accessory. The boom securely attaches to any tube diameter ranging from 15mm to 22mm.The 9” reach to the end of the boom provides ample distance.The angle adjustment clamp’s interlocking teeth securely locks the boom angle in place while allowing 270 degrees of rotationfor perfect placement.The 5/8 –27 Male Threads at boom end with jam nut fits on most any microphone.The GFW-MIC-CLMPBM9 by Frameworks is a great space saver when using a second microphone stand is not an option. As an added bonus the system clamps onto most desk surfaces As well.

• Adjustable angle clamp-on mini boom, with 9" Reach
• Clamp securely attaches to tube diameters ranging from 15mm -22mm
• Interlocking teeth securely locks boom angle
• Angle adjustment clamp allows 270-degrees of rotation
• 5/8-27 Male threads at boom end with jam nut

User questions & answers

Question:	Will this be compatible with AT2020 microphone
Answer:	Sure. It will fit any standard mic in the same way as a regular stand.
Question:	Is the padding on the holder safe for nitrocellulose-finished instruments
Answer:	4.5 x 8". Heavy too. Mine has been extremely sturdy and very adjustable.
Question:	Can it handle the weight of a Rode Podmic that weighs about 2.5lbs
Answer:	Hello Kade. The base is powder coated and made from cast iron. It features a rubber gasket on the bottom to absorb vibration. The base is weighted so it really is intended for floor use but should be ok if used on a computer desk. Thanks!
Question:	Will this work on the gator framework adjustable double guitar stand? i have a guitar and mandolin I am hoping to use it for
Answer:	You should have received the two-piece threaded adapter with the stand. If you remove the internal threaded insert, it should fit. I removed mind and screwed the mic holder into the stand head.

Product description

Description

InnoGear microphone arm stand is suitable for any stores, families, stages, studios, broadcasting and TV stations, etc. It is made of high quality iron frame. Movement is solid and smooth without any metal noise.



Specification

Single stand length: 14 inches 

Square pipe diameter: 0.53 inches 

Maximum vertical height: 27 inches 

Maximum horizontal height: 28 inches 

Maximum weight: Max 1.6 kg 

Specification of connecting rod connector: 5/8"

Material: Iron



Package includes

1 x InnoGear Spring Built-in Microphone Arm Stand

1 x InnoGear Desk Mounting Clamp

5 x InnoGear Cable Ties

1 x User Manual



Note

1. Test that you have mounted the clam securely by seeing if you can pull it off the edge of the table. 

2. Please loosen the fixing screws on the side of the base before you need to rotate the stand.

• Space-saving: Unlike traditional mic stands, InnoGear mic suspension boom arm is foldable, which helps free up desk space. You can easily clip and unclip the boom arm from your desk.
• Upgraded Length & Freely Position: This boom arm has a MAX reach of 28 inches horizontally and 27 inches vertically for your convenience. It allows you to freely position microphones within adjustable range and will not bounce up.
• Sturdy Material & Improved Load-bearing: It is made of sturdy steel, the thickness of its arm tube is improved from 0.39 inches to 0.53 inches, it can bear MAX weight of 3.5lbs.
• University Compatibility: 5/8" connector is compatible with many microphones like Blue Yeti, Blue Snowball, AT2020, AT2020USB+, AT2035, ATR2500-USB, ATR2100-USB, etc.
• Premium Appearance: The built-in spring balance system looks more upscale and professional than other arms, which springs are exposed to the outside.

User questions & answers

Question:	Will this hold the Elgato wave 3 without the shock mount? What is the minimal weight for the engagement of the spring
Answer:	It will. One of my closest friends is using this arm with that exact microphone. He is using the shockmount but the weight difference is negligible. The positioning of the arm is more pliable than you think. In my experience, it simply stays where you put it, regardless of whether it is bearing any load or not.
Question:	Will the small version hold the Elgato Wave 3 with shock mount and pop filter or Will i need the large version
Answer:	I have the larger-size stand and would recommend it if you want the stand to stay out of the way of multiple computer monitors (the lower arm raises it above the level of a 26" monitor. My stand has no problem holding an sE Electronics X1-s condensor mic with a plastic shock mount that together weigh over a pound. It easily supports this mic and shock mount with confidence. The Elgato Wave 3 weighs only about 10 ounces, so it should be just fine on this stand even with a shock mount. I've very pleased with this stand (again, I bought the larger size and highly recommend it).
Question:	Can this rode podmic be screwed into this arm? also, can this hold the rode podmic
Answer:	Yes I have a PodMic on this exact arm (the large size one) and it works perfectly. I was uncertain if the weight of the PodMic (which is surprisingly heavy) would be able to be held with this arm but it does so without a problem. I've been using it for a few months now and it hasn't sagged or had any problems. And yes, it does screw in to this without an issue.
Question:	how does it compare to rode PSA 1 in terms of reach length and movement
Answer:	Same measurements. Same sturdiness. I own both and this one is a bit better when paired with a Shure SM7B as the part that screws into the mic is a bit longer which allows for more pivoting movement of the mic while mounted. With the Rode PSA the XLR jack comes in contact with the mic mount which prevents rotating the mic.

Product features

InnoGear Superb Microphone Boom Arm Stand

This microphone stand is made of premium cast metal which is pretty sturdy than other inferior stands on the market. What is the biggest difference between our mic stand and others is that our springs are all internal and the max bearing capacity is 3.5 lbs. You can easily hold as much as THREE Blue Yeti with it.

InnoGear solid microphone stand is adjustable and versatile, easy to adjust position and angle. It is a great choice for podcasting and radio to show your perfect voice.

FLEXIBLE MIC ARM STAND

Due to its premium heavy-duty steel material, the microphone arm is easy to adjust which could be simply moved up and down 180° to provide you a perfect angle, and when you move it, it will not generate any harsh sound like other cheap mic stands.

TABLE CLAMP BASE

The table clamp base is designed with a side screw that can have the microphone stand been firmed tightly on the desk. The sponge on the base could protect your table without any scratches when you swivel it.

5/8" ROD CONNECTOR

The silver extension rod could be rotated 270° and the connector is 5/8" which is compatible with a number of microphones like Blue Yeti, Blue Snowball, AT2020, AT2020USB+, AT2035, ATR2500-USB, ATR2100-USB, etc.

• Heavy Duty Construction: The T20 is made of durable steel for outstanding bearing capacity. Max load: 4lbs/1.8kg.
• Upgraded Desk Clamp: The desk clamp has 4 times larger contact area for easily clip to any desk up to 2.4''/60mm thick. In addition, the headset hook is integrated into the desk clamp.
• Universal Compatibility: The T20 comes with a standard 3/8" to 5/8" adapter for different shock mounts and microphones. (Note: The microphone and shock mount are not included.)
• Flexible Adjustment: The T20 offers 700mm horizontal/vertical distance and 360° full rotation. You can easily adjust it to get the best pickup.
• All in One: 1 x Boom arm, 1 x Desk clamp, 1 x Mic clip, 1 x 3/8" to 5/8" Adapter, 1 x Pop filter, 1 x Foam cover, 4 x Cable tie, 1 x Manual.

User questions & answers

Question:	What are the differences between this suspension stand and innogear's stand
Answer:	The differences between T20 stand and innogear stand are as follows: 1. Different maximum load: innogear 1000g, TONOR T20 1800g 2. Desk clamp area: innogear: 9c㎡, TONOR T20: 38c㎡ 3. Max desktop thickness: innogear: 4.5cm, TONOR T20 6cm 4. Support frames: innogear: 2 pieces, TONOR 3 pieces
Question:	Can the stand be adjusted freely
Answer:	The port of the desk clamp has a sleek design that allows the stand arm to rotate 360. And with a 180° maximum adjustable angle of the stand, you can conveniently set it to the desired height and angle.
Question:	Will this work with my blue yeti
Answer:	Yes, with the included 3/8 to 5/8 adapter, your blue yeti can be mounted onto the arm stand with ease. To know more about the specific blue yeti model and how to connect to the arm stand, refer to the compatibility list: https://www.tonormic.com/pages/what-is-the-thread-size-of-your-microphone-stand
Question:	Is it compatible with microphones with 5/8" inch thread
Answer:	The screw size of the TONOR T20 is 3/8". However, the package includes a 3/8" to 5/8" adapter, which can support microphones with a 5/8" thread.

Product features

TONOR T20 Microphone Suspension Scissor Arm Stand

Specifications

• Material: steel
• Weight: 1.8lbs
• Max. horizontal/vertical Length: 27.6"/700mm
• Rotation angle: 360°
• Maximum support weight: 4lbs/1.8kg
• Thread specification: standard 3/8" thread
• Adapter: 3/8" female to 5/8" male adapter (included)

The Upgraded Desk Clamp

With the 4 times larger contact area of the clamp, ensuring it is firmly fixed on the desk.

High-quality & Super-tension Springs

The load capacity is increased by 80%, with no vibration noise during use.

High Grade Steel Rods

More durable with upgraded width (12mm) and thickness (1mm).

Metal Adapter

Get rid of any incompatibility issues. Suitable for different kinds of shock mounts and could be directly attached to microphones like Yeti and snowball.

Pop filter

Effectively prevent B/P plosives during recording.

For the correct installation method, please refer to the picture.

Four Cable Ties

Say goodbye to the clutter of cables with this quick and easy low-profile fastening solution.

Product description

The Samson MBA38 Microphone Boom Arm is a highly-adjustable microphone desktop stand perfect for any radio, podcast, broadcast, or streaming setup. The MBA38 provides 38” of horizontal/vertical arm reach and gives users flexibility to achieve optimal microphone placement. The silent rotating design features internal springs that allow for quiet and effortless positioning that eliminates excess noise in the recording environment. With two mounting options included, the MBA38 can be attached to a table or desk with the C-clamp mount or more permanently fixed to a surface with the flange mount. The MBA38 has a durable steel construction that supports microphones weighing up to 5 lb. (2. 3kg) and has a 5/8”-27 mic clip threading for simple microphone integration.

• Highly adjustable microphone boom enables horizontal and vertical positioning for optimal microphone placement
• 38” of maximum arm reach gives users max microphone placement flexibility, ideal for podcasting, broadcasting, streaming and voice recording setups
• Boom arm offers 5/8”-27 mic clip threading for easy microphone integration
• Can be easily attached to a desk or tabletop with sturdy C-clamp mount or fixed permanently to a surface with flange mount
• Internal springs provide effortless and silent microphone positioning which is vital in live recording situations
• Sturdy steel construction supports microphones up to 5lb. (2. 3kg)
• Foldable arm band for simple transportation and storage

User questions & answers

Question:	what is the max weight it can hold? I have a Samson G track Pro and it weights 1.2lbs
Answer:	Hello, As long as your AT2020 has a mount that cooperates with the Standard US-style male threading you'll be good to go! If you have any other questions, please feel free to reach out to us at [email protected]. Thanks!
Question:	What is the height distance for the desk mount I need one that’s is at least 3 inches and this one looks kinda big but I want to be sure
Answer:	Hello, Currently the Foam on this holder is not nitro safe. But, we are working with our factory towards a solution for future models. If you have any other questions, please feel free to reach out to us at [email protected]. Thank you!
Question:	What's the minimum amount of desk lip needed for the clamp to be sturdy? I have 1 inch
Answer:	Hello, This arm should be able to handle up to 3lbs of weight. If you have any other questions, please feel free to reach out to us at info@gatorcases . Com. Thanks!
Question:	The chrome piece that connects the mic to the boom arm doesn't clamp down and swings left/right. How do I clamp it down
Answer:	Hello, We do not recommend using this uke stand on a guitar stand. The Clamp was designed for Mic stand poles which have a larger diameter than Guitar stands. If you have any other questions, please reach out to us directly. Thank you!

Product features

Max Grip

Included C-clamp mount has a 3" maximum grip (2" for MBA18) for attaching to a desk or tabletop or use the included flange mount for permanent surface installation (Not available with MBA18).

Noise-Free Design

Internal springs and articulating arm design allow for silent and effortless positioning, which is ideal while recording, streaming or during live broadcasts.

5lb Of Max Load Capacity

Standard 5/8”- 27 mic clip threading makes mounting your favorite microphone simple. Sturdy steel construction supports microphones up to 5lb (2.3kg)

Included Accessories

• Professional Adjustable Microphone Stand:Professional Recording Studio Equipment with adjustable microphone stand, Adjustable Shock Mount, double layer Pop Filter , Screw adapter, microphone shock mount, Table mounting clamp with sponge pad. The diameter of ABS plastic microphone shock mount is 1.77''/4.5 cm,it can be changed by adjusting the O-rings of shock mount,compatible various mic.Max diameter:2.05''/5.2 cm.
• Strong Compatibility and Applicability: Luling Arts mic arm could compatible with the Blue Yeti, Snowball or mount most standard-sized microphones. 3/8'' to 5/8''Screw adapter are line with industry standards. Adjustable shock mount and universal mic clip also provide more possibilities.Max Support Weight is 70 oz/2 kg (4.4 pound).
• Upgraded table mounting clamp:Designed for heavy duty carry and compared with old versions,all zinc alloy construction desk mount is built with anti-scratch pad and wider mouth up to 2.16"（The product is 6 cm） to fit most desktop can carry heavy microphone for a long time.
• Excellent Shock Mount Effect: The diameter of the mic clip can be changed by adjusting O-rings on shock mount, perfect suit for mics with a diameter of more than 4.5cm. The professional suspension shock mount isolates most studio condenser mics from physical vibration, floor, and stand noise. Take Your Recording and Streaming to the Next Level.
• Two-Screen POP Filters: The first screen blocks air blasts as any pop filter normally would; The gap in between then disperses any remaining air pressure, so by the time it passes the second screen, the blast is easily contained. Banish the dreaded hissing and lisping sounds that come when pronouncing the letter "S" and blocks those ugly "plosives" that follows "B" and "P".(with great customer service, Luling Arts offers 12-month repair/replacement and 30-day hassle-free return.)

User questions & answers

Question:	Is it a difficult set up and noisy
Answer:	Dear customer,Thanks for your question.Please don't worry about this quality.because the double layered screen pop filters is very professional: the first screen blocks air blasts as any pop filter normally would; The gap in between then disperses any remaining air pressure, so by the time it passes the second screen, the blast is easily contained to produce great quality recordings. as for the installation, we have a detailed instruction manual, which only takes a few minutes to install.really very easy.thank you!
Question:	How do you get it to work with the blue yeti? The adapter that came with mine was too small for my yeti
Answer:	There is an adapter that is in the piece with 2 circles what can be removed that should fit in the mic. That is what I had to do and it works for me. The metal adapter will not be suitable at all though for it. But the plastic screw adapter will screw directly into the actual stand.
Question:	Will a Blue Yeti mic fit in the shock mount
Answer:	The shock mount is *too small* for the Blue Yeti, however, you can still connect that microphone to the stand as-is - you do it without the shock mount. I purchased this item from 'J&JOYCE' on June 6, 2020 (barcode X0023PNL07 on box - no other identifiers available). I can confirm that *the stand works perfectly with both my Blue Yeti and my Blue Snowball*. Both these mics have the same threaded 5/8" female connector underneath. (Normally the trip pod for the Blue Snowball screws into this connector. For the Blue Yeti, the connector is not used when mounted on the heavy stand it comes with). The stand came with a 5/8" male-to 3/8" female adapter, which you screw into your Blue microphone. This then connects to the peg on the stand. You will *not* use the shock mount that comes with the same for these types of Blue mics.
Question:	Why some early reviews titled "cute""i love the kitty""makes the best burgers ever"? this can't be the description of the microphone stand
Answer:	I am very surprised that these review, malicious do I have to admire the rivals, all first give me a bad review and now has nothing to do with my reviews, want to every means to put my most real products don't let it consumers for everyone, so I opened a CASE to find amazon help, hope you can give me a fair reply. Now my customers are all from old customers.Only when they use my products will they be surprised by their quality. Let's hope the market is fair, not rigged.

Product features

Luling Arts Professional Microphone Stand!

Mic Clip Holder

Mic Clip Holder

firmly holds standard-size microphones. Is a straight style clip with a 5/8"-27 female threaded insert in the plastic base.support 1.18-1.57''( 4-5 cm) diameter microphones.

3/8'' to 5/8''Screw adapter

Compatible with the Blue Yeti, Snowball or mount most standard-sized microphones. 3/8'' to 5/8''Screw adapter are line with industry standards. Max Support Weight is 70 oz/2 kg (4.4 pound).

Mic Shock Mount

Professional suspension shock mount isolates most studio condenser mics from physical vibration,fits most condenser microphones, and support diameter ranging from 1.96-2.36'' (5-6 cm) diameter Microphones

Upgraded Version

Designed for heavy duty carry and compared with old versions.(30 days After-sales)

Upgraded table mounting

All zinc alloy construction desk mount is built with anti-scratch pad and protective cover.

Protect the bracket pin of stand from being scratched when you loosen or tighten the knob

wider mouth up to 2.36"（The product is 6 cm） to fit most desktop

Product description

Getting your amp off the floor and tilted improves your mix. This new tilt-back amp stand is constructed with a heavy-duty steel tripod base that adjusts to accommodate various sized amps. More importantly, it features 5 tilt positions that allow for optimal sound. The fold-and-go RS7501 is perfect for the road and it even includes a 5/8" threaded end allowing musicians to add a mic or boom. Both the black EVA rubber amp holders and foam padded collar that slides along the upper shaft protects the amp from scratches and dings. Now includes the MSA7500CB! A 22" boom arm with a 7" adjustable mini boom arm designed for use with the popular RS7500 Tilt back Amp Stand. Full articulation allows any style of microphone to be positioned for close or medium-distance making. The proven Posi-Lok clutch design is safe to use with even the most valuable microphones. Includes 2 cable clips to secure loose mic cords.

From the Manufacturer

Getting your amp off the floor and tilted improves your mix. This new tilt-back amp stand is constructed with a heavy-duty steel tripod base that adjusts to accommodate various sized amps. More importantly, it features 5 tilt positions that allow for optimal sound. The fold-and-go RS7501 is perfect for the road and it even includes a 5/8" threaded end allowing musicians to add a mic or boom. Both the black EVA rubber amp holders and foam padded collar that slides along the upper shaft protects the amp from scratches and dings. Now includes the MSA7500CB! A 22" boom arm with a 7" adjustable mini boom arm designed for use with the popular RS7500 Tiltback Amp Stand. Full articulation allows any style of microphone to be positioned for close or medium-distance miking. The proven Posi-Lok clutch design is safe to use with even the most valuable microphones. Includes 2 cable clips to secure loose mic cords.

• Heavy-duty steel tripod base adjusts to accommodate various sized amps
• Back leg adjusts to five tilt positions for optimal angle adjustment
• Easily folds for compact storage and portability
• 28" Leg span ensures stability
• Adjustable foam padded sleeves prevent vibrations
• Black EVA prevents slipping, scratches, and dings
• Includes 22" Boom arm with 7" adjustable mini boom

Product features

On-Stage RS7501

Getting your amp off the floor and tilted improves your mix. This new tilt-back amp stand is constructed with a heavy-duty steel tripod base that adjusts to accommodate various sized amps. More importantly, it features 5 tilt positions that allow for optimal sound. The fold-and-go RS7501 is perfect for the road and it even includes a 5/8" threaded end allowing musicians to add a mic or boom. Both the black EVA rubber amp holders and foam padded collar that slides along the upper shaft protects the amp from scratches and dings. Now includes the MSA7500CB! A 22" boom arm with a 7" adjustable mini boom arm designed for use with the popular RS7500 Tiltback Amp Stand. Full articulation allows any style of microphone to be positioned for close or medium-distance miking. The proven Posi-Lok clutch design is safe to use with even the most valuable microphones.

Product description

Our best selling stand! This Euro boom boasts a hybrid sheet metal and composite leg housing, making it virtually unbreakable. With a removable boom arm and its ability to fold flat, This stand is a must for every member of the band. Features a zinc mid-point clutch and black finish.

• Our best selling stand, the MS7701B features a steel-reinforced plastic leg housing which offers less weight and exceptional strength
• Folding legs with plastic endcaps for durability and reduced floor vibrations
• Steel midpoint locking clutch adjusts height from 32" to 61.5"
• 30" removable boom arm allows for easy positioning

User questions & answers

Question:	Do I need to buy a microphone mount for this? Will any fit on there
Answer:	Yes, you need a mount. There are several on amazon - look on the stand page under what other people bought ..., or do a search of MS7701 microphone adapter or mount.
Question:	will the stand work with a blue yeti
Answer:	It absolutely does. This stand screws in perfectly to the Blue Yeti, and it hold the mic up no problem. Just make sure you tighten all the screws.
Question:	Would this be too heavy to use as a boom mic stand for a movie
Answer:	Actually it's too light and tends to fall over. It also would be a terrible way to hold a boom mic. If you need a low budget boom mic holder use a painters extension pole and rig up a shock mount from the mic from rubber bands and PVC pipe cult into rings.
Question:	Can you unscrew the boom arm and use the base as a normal vertical microphone stand? Does the vertical part end in a standard 5/8" thread
Answer:	Hi Kevin. Sorry for the late response. Yes you can unscrew the boom. The base of the stand is wider than a standard round base so you would have to be careful not to step on or bump the base leg as you would be standing closer to the microphone stand without the boom extension. Hope this helps.

Product features

On-Stage MS7701B

Our best-selling stand! The MS7701 is designed to go wherever your music takes you. This model boasts hybrid sheet metal and composite leg housing, making it lightweight and unbreakable. A removable boom arm and fold-flat storage/portability makes this stand a must for every member of the band. This model is available with a black shaft (MS7701B) or chrome shaft (MS7701C).