13 best cleaning cpap mask and hoses
Cleaning CPAP (Continuous Positive Airway Pressure) masks and hoses is crucial for maintaining the effectiveness and hygiene of your CPAP therapy. CPAP accessories, including the mask, hose, and other components, need regular cleaning to prevent the growth of bacteria, mold, and other contaminants. Here's what you should know about cleaning CPAP masks and hoses:
Cleaning CPAP Mask:
Daily Cleaning: It's essential to clean your CPAP mask daily, ideally in the morning after use. This helps prevent the buildup of oils, sweat, and skin particles that can accumulate overnight.
Supplies: You'll need mild, non-fragrant, and hypoallergenic soap, warm water, a basin or sink, and a soft cloth or sponge for cleaning.
Disassembly: Disassemble the mask into its individual components, including the cushion or pillow, frame, and headgear, if applicable.
Soaking: Submerge the mask components in warm, soapy water. Avoid using hot water as it can damage the mask's materials.
Cleaning: Gently clean the components with a soft cloth or sponge, paying attention to areas that come into contact with your skin. Be thorough but avoid abrasive scrubbing.
Rinsing: Rinse all components thoroughly with clean, warm water to remove any soap residue.Ensure there is no soap left as it can cause skin irritation.
Drying: Allow the mask components to air dry on a clean, dry towel or a drying rack. Avoid using a cloth or paper towels that may leave lint.
Reassembly: Once the components are completely dry, reassemble the mask according to the manufacturer's instructions.
Replace Regularly: CPAP mask components, especially the cushion or pillow, should be replaced periodically, as recommended by the manufacturer, to ensure a proper seal and optimal therapy.
Cleaning CPAP Hose:
Weekly Cleaning: CPAP hoses should be cleaned weekly to prevent the buildup of mold, bacteria, and dust.
Supplies: You'll need mild, non-fragrant soap, warm water, a basin or sink, and a CPAP hose brush or a long, flexible brush.
Disconnection: Disconnect the hose from the CPAP machine and mask.
Soaking: Submerge the hose in warm, soapy water. Avoid using hot water.
Cleaning: Use the CPAP hose brush or a long, flexible brush to gently clean the inside of the hose. Be thorough but gentle to avoid damaging the hose.
Rinsing: Rinse the hose thoroughly with clean, warm water to remove any soap residue. Ensure there is no soap left inside.
Drying: Hang the hose vertically in a well-ventilated area to air dry. Ensure it is completely dry before reassembling it for use.
Reconnection: Once the hose is dry, reconnect it to the CPAP machine and mask.
Replace Regularly: CPAP hoses should also be replaced periodically as recommended by the manufacturer or when signs of wear and tear appear.
General Tips:
- Avoid using strong-smelling or fragrant soaps, as these can leave residual odors in your CPAP equipment.
- Always follow the manufacturer's cleaning and maintenance instructions for your specific CPAP mask and hose.
- Keep your CPAP equipment in a clean and dry storage area when not in use to prevent contamination.
Regular cleaning and proper maintenance of your CPAP mask and hose are essential for ensuring the effectiveness of your therapy and promoting good respiratory health. Consult your healthcare provider or the CPAP equipment manufacturer if you have any specific concerns or questions about cleaning your CPAP equipment.
Below you can find our editor's choice of the best cleaning cpap mask and hoses on the market- NON-WOVEN FABRIC: Our Care Touch CPAP mask cleaning wipes are nonwoven, large, and unscented
- CONVENIENT: Our wipes easily clean your CPAP equipment
- WHAT’S INCLUDED: packs of 70 count CPAP mask wipes
- WE CARE BECAUSE YOU CARE: You care about your health, and we care about you. Care Touch is committed to providing the best quality products to our customers. Our care doesn’t end when your product arrives at your door. We’re fully dedicated to your satisfaction. If you have any questions or concerns about your order, contact us at any time. Our staff is here to help.
User questions & answers
Question: | Does this product contain Formaldehyde or any other toxin |
Answer: | Check with wisk |
Question: | what are the ingredients and do they disinfect in addition to cleaning |
Answer: | This item has no size, the headgear (not included) comes in different sizes. |
Question: | can i wash my biopack just using 50/50 alcohol and distilled water |
Answer: | Yes, it's a genuine Philips Respironics product. |
Question: | Do the wipes sanitize the mask surface and if so what ingredient does this |
Answer: | Cushion,If you're referring to the nose piece,No it does not include that part. |
Product features
Care Touch CPAP Mask Wipes
Keeping your machines clean is important to your health and Care Touch CPAP Cleaning Wipes make it easy for you to clean your CPAP, BiPAP, or other PAP/oxygen therapy machines. Whether you are cleaning your mask tube or machine, our wipes are large enough to quickly clean your CPAP supplies. Our formula is lint free and non woven to ensure that there are no harmful chemicals or substances entering your mask or tube.
Breathe easy, we've got you covered!
Our wipes come with NO added fragrances or scent - If you're looking for a mild scent of fresh citrus, just check out our storefront for our scented wipes!
- CPAP tube brush are specially designed for scrubbing the inside of the CPAP tubing. It looks like a plumbing snake, with a long flexible handle and a brush on the other end.
- A more thorough cleaning of your CPAP hose that is easy and hassle free; The CPAP brush can effectively run through the whole length of your regular CPAP hose to remove all the dirt or microcontaminants that could possibly accumulate inside your CPAP tubing.
- Spotless CPAP tubing inside and out; 8 in 1 CPAP tube brush, for every tube (universal or slim line) and mask orifice you can think of.
- Usage Instructions: Please see the product images and description on how to effectively use your CPAP brush.
- All Order Includes: 2 CPAP Travel Wipes and 100+ CPAP Comfort Hacks E-Book
User questions & answers
Question: | I have a 6ft hose, Would this kit reach through it all |
Answer: | They are made in Israel. Designed in the USA. |
Question: | I have the philips remstar system one the hose is not heated. i can't seem to find the diameter of the hose anywhere! do i need 16 or 22mm brush |
Answer: | Natural ingredients (citric acid balances PH): Aqua, Polymeric Zinc Complex, Sodium Levulinate, Caprylyl Glycol, Potassium Sorbate, Benzyl Alcohol, Eucalyptus Globulus Leaf Oil, Disodium Cocoyl Glutamate, Acetic Acid, Sodium Cocoyl Glutamate, Citric Acid |
Question: | is the brush dishwasher safe |
Answer: | It doesn't look like they are. Compared to brand name disinfecting wipes, it doesn't have the same ingredients. |
Question: | Can it not clean 15mm slimline tubing of Resmed or Philips Respironics tubing |
Answer: | It will if the shower head isn't to small or to large, if it will fit over it and is a little bit snug it works fine, hope this helps. |
Product description
Care Touch CPAP Tube Cleaning Brush with Mask Cleaning Wipes
Why choose our product?
The 7 ft. Care Touch CPAP Cleaning Brush was made with simplicity, allowing for an efficient method of cleaning a rather stubborn object. Our goal is to make maintaining your health and medical equipment as easy and stress-free as possible.
With the wipes, you not only clean the inside, but also the exterior of your mask and tubes to make your CPAP equipment look and feel brand new. The wipes are unscented so all you get is a fresh clean machine!
Cleaning your CPAP machine
Use a mild detergent and warm water. Rinse thoroughly with cool water. Keep the tube as straight as possible and gently work the brush in a back and forth motion, in short strokes, gradually working further inside the tube.
Avoid aggressive use when cleaning. The fan tipped brush will reduce stress to tubing walls. However, it is recommended the CPAP tube be kept straight as possible during cleanings to avoid unnecessary wear or damage.
When done cleaning, thoroughly rinse tube with a stream of cool water, Gently pat the bristles until dry to the touch and hang somewhere where there is air circulation. Carefully loosen and straighten tube brush, maintaining a hold on both ends. Once unwound, we suggest finding somewhere to hang the brush.
- CLEANING SET: The brush and wipe combo allows for convenient cleaning without any hassle.
- SOFT BRUSH: The ultra soft brushes prevent any damage of the CPAP tube while still providing an excellent clean.
- EASY TO CLEAN: The brush extends up to 7 feet so you can easily clean the entire tube at once.
- SPACE SAVER: While this can extend up to 7 feet so you can easily clean your CPAP hose, it can fold up into a small plastic bag included without taking up too much room.
- CARE TOUCH CPAP SUPPLIES: Check out our full line of supplies for your CPAP and BIPAP machine. From hose and mask brushes, mask wipes, CPAP hoses to CPAP hose holders. Breathe easy, we've got it all!
User questions & answers
Question: | What chemicals are in the wipes |
Answer: | Dear, you should protect camera with the waterproof case. You can rafting and record audio with case, it;s ok |
Question: | Help. brush and snake are stuck in the humidifier tube. i put it in the humidifier hole. how do i remove it |
Answer: | SD card is not conclude. this action camera equips 2 pcs 1050Mah battery, support 190 minutes working even on 4K video mode, easy operate |
Question: | Can i use this with a resmed airsense 10 autoset |
Answer: | Action camera comes with a Micro USB interface and Mini HDMI interface. Use our free USB data cable to connect to the computer, and you can get the data in the camera's TF card on the computer. Connect the camera to the HDTV with the Mini HDMI cable, you can play the HD video in the TF card on the HDTV |
Question: | Is there any kind of warranty on the 7' brush? The head just snapped off mine, and I just got it in January |
Answer: | Since the dive mode is waterproof rated deeper that snorkeling and generally speaking you will have more light on a snorkel adventure ,I would say it should work great without the need for color filters or lights for Scuba at depth at normal video settings. You should try all settings and find what you like |
Product description
-Gentle soap specifically designed for easy daily washing of CPAP Mask and CPAP Hose. -Free from alcohol, bleach, conditioners, moisturizers, and latex. -Specifically designed to clean silicone surfaces while preserving their softness and elasticity. -Removes body oils from surfaces of CPAP masks and CPAP hoses, and neutralizes odors. -One pack contains 3 bottles, each bottle is 250ml/8.4oz – chose your combination of either 3 Green Tea-Mint scent, 3 Grapefruit-Lemon scent, 2 Grapefruit-Lemon & 1 Green Tea-Mint scent, or 2 Green Tea-Mint & 1 Grapefruit-Lemon Scent bottles.
- Gentle soap specifically designed for easy daily washing of CPAP Mask and CPAP Hose
- Free from alcohol, bleach, conditioners, moisturizers, and latex
- Specifically designed to clean silicone surfaces while preserving their softness and elasticity
- Removes body oils from surfaces of CPAP masks and CPAP hoses, and neutralizes odors
- One pack contains 3 bottles, each bottle is 250ml/8.4oz – chose your combination of either 3 Green Tea-Mint scent, 3 Grapefruit-Lemon scent, 2 Grapefruit-Lemon & 1 Green Tea-Mint scent, or 2 Green Tea-Mint & 1 Grapefruit-Lemon Scent bottles
User questions & answers
Question: | Do you wash both the small short hose and the long gray hose |
Answer: | Very little. But you will have to squeeze enough to overcome the vacuum. Glue comes out, air has to go in. Or squeeze it. |
Question: | How exactly is it used? Does it apply directly to the mask and tubing? Or is it mixed with water |
Answer: | Off the top of my head I’d say between 2&2.5” wide |
Question: | Advertised as grapefruit lemon scent but i font smell it. Why is that? Disappointed |
Answer: | Approx 10 seconds |
Question: | How exactly do you dry all the water from the inside the hose after washing it |
Answer: | I wouldn't. Just get some colored epoxy and redo it. This glue is nothing more then super glue with an drying accelerant that drys in seconds. |
Product description
Gentle soap specifically designed for easy daily washing of CPAP Mask and CPAP Hose. -Free from alcohol, bleach, conditioners, moisturizers, and latex. -Specifically designed to clean silicone surfaces while preserving their softness and elasticity. -Removes body oils from surfaces of CPAP masks and CPAP hoses, and neutralizes odors. - One pack contains 3 bottles, each bottle is 250ml/8.4oz
- Gentle soap specifically designed for easy daily washing of CPAP Mask and CPAP Hose
- Free from alcohol, bleach, conditioners, moisturizers, and latex
- Specifically designed to clean silicone surfaces while preserving their softness and elasticity
- Removes body oils from surfaces of CPAP masks and CPAP hoses, and neutralizes odors
- One pack contains 3 bottles, each bottle is 250ml/8.4oz
Product description
Care Touch CPAP Tube Cleaning Brush Plus Handy Brush
For people sleeping or using a CPAP, BIPAP or any other PAP machines, it is important to constantly clean the machines and tubes to keep it sterile, germ and bacteria free.
A person that sleeps approximately 6-8 hours a night, breaths on average 5,000 breaths a night which is over 2 million breaths a year. Now add on to that someone that is breathing through a mask and tube, especially one that humidifies the air, that is an absolute breeding ground for bacteria, germs and infection to live and grow.
For this reason it is VERY IMPORTANT to clean the CPAP mask and tube on a constant basis.
These Care Touch CPAP Cleaning Brushes make it easy to do so.
The cleaning brush extends up to 7 feet so you can clean the entire length of the tube at once.
The handy brush is great for the CPAP mask, to clean the opening where the tube gets inserted, without the 7 foot coil at the end.
How to clean your CPAP Tubing
Use a mild detergent and warm water.
Rinse thoroughly with cool water
Keep the tube as straight as possible and gently work the brush in a back and forth motion, in short strokes, gradually working further inside the tube.
Avoid aggressive use when cleaning. The fan tipped brush will reduce stress to tubing walls. However, it is recommended the CPAP tube be kept straight as possible during cleanings to avoid unnecessary wear or damage.
When done cleaning, thoroughly rinse tube with a stream of cool water, Gently pat the bristles until dry to the touch and hang somewhere where there is air circulation. Carefully loosen and straighten tube brush, maintaining a hold on both ends. Once unwound, we suggest finding somewhere to hang the brush.
Check out our full line of quality CPAP supplies for your CPAP machine. Breathe easy, we've got you covered!
- ★ CLEANER CPAP MACHINE - With hundreds of thousands of breaths moving through the CPAP tube, this cleaning brush helps clean it out from all the germs and bacteria passing through
- ★ SOFT BRUSHES - The ultra soft brushes prevent any damage of the CPAP tube while still providing an excellent clean
- ★ SPACE SAVER - While this can extend up to 7 feet so you can easily clean your CPAP hose, it can fold up into a small plastic bag included without taking up too much room
- ★ EASY TO CLEAN - The brush extends up to 7 feet so you can easily clean the entire tube at once
- ★ CARE TOUCH CPAP SUPPLIES: Check out our full line of supplies for your CPAP and BIPAP machine. From hose and mask brushes, mask wipes, CPAP hoses to CPAP hose holders. Breathe easy, we've got it all!
User questions & answers
Question: | Does it work with all cpap machines |
Answer: | iSonic item # CTAR01 Ultrasonic Cleaning Tablet,Amazon ASIN # B07H9H7SYQ. You can also get a 4-pack of the same tablet, item # CTAR01x4, Amazon ASIN # B07J249F5V. |
Question: | how many brushs are there in the package |
Answer: | You can get it on Amazon. Search CTAR01. https://www.amazon.com/s?k=CTAR01&ref=nb_sb_noss_2 |
Question: | Is this brush set single use, or can it be used multiple times |
Answer: | 6' fits, but you need to curl the hose-and only the long hose-in the water. I also make sure the hose is completely submersed in the water with no air left in the hose. I clean the other parts separately. Therefore, I wash the 6' hose in one water bath, the 2' hose, mask and half of the water reservoir in another bath, and the other half of the water reservoir in a third bath. I allow about 3 hours to completely clean my CPAP equipment. Most of the time is waiting. I do not attend the machine while it is cleaning the pieces. I spend maybe 20 minutes total in changing the bath water, preparing & rinsing the cleaned pieces, and finally rinsing the machine afterwards. |
Question: | will it work with resmed 10 climate tube? had a right angle at attaching point |
Answer: | THIS IS MADE IN CHINA! SAYS SO RIGHT ON THE BOTTLE! |
Product description
This CPAP hose brush is designed to gently clean your CPAP tubing. Made with soft nylon bristles that are flexible to fit slim or standard hoses.
- 46 inch long hose
- Made with soft nylon bristles to fit both slim and regular size CPAP hoses
- Comfortable plastic handle for easy cleaning
User questions & answers
Question: | does this item require a prescription |
Answer: | The brush to clean the CPAP does not require a prescription. |
Question: | Will this brush work for a dream station cpap |
Answer: | It will work for Philipp dream station cpap hose size 15mm |
Question: | Does this fit the tubing on a dream machine |
Answer: | Yes. It fits the slim 15mm and heated hose fine. |
Question: | Maybe a silly question, but is washing the tube uncoiled with a brush a messy process? Seems like I might have water everywhere |
Answer: | When I used it, I did have a little water on the counter top, but not too bad. It is a long brush and only reaches 1/2 the way of the CPAP tubing. Then I had to take the other end and repeat the process. Yes it is messy. I decided to go the waterless route and bought a O3 cleaner. Much neater and easier to use. I hope this helps. |
Product description
Ultrasonic cleaner generates cavitation which are millions of air bubbles which implode and dislodge debris from the items submerged in water. iSonic Ultrasonic C-Pap Deep Cleaner cleans in crevices and inside the hose. In comparison, ozone or UV cleaners only disinfect the top surfaces and they do not remove debris so debris are accumulated in the mask and the hose. A stainless weight bracket holds down the mask and the hose from floating. P4821-CPAP has a tank capacity of 2. 6Qt/2. 5L and tank size of 9. 6"x5. 9"x3" which fits a mask and a short hose, a heater that heats water to up to 140F/60C. It has a touch sensing control panel, a convenient power switch, a plastic basket to hold the mask and the hose. It's equipped with a 60W ultrasonic stack transducer which is two times more powerful compared to wafer transducer used on small personal ultrasonic cleaners. Some manufacturers use wafer transducers in their commercial models but they do not have the same cleaning power of stack transducers. A box of 48 cleaning tablets is included to help to deep clean, refresh the parts and to remove odors. For 6'-long hoses, larger models such as P4831-CPAP and P4862-CPAP are more appropriate. To dry a hose, either hang it to drip dry or use an blow drier which will speed up drying. Do not use high temperature.
Manufacturer Contact Information
Jerry
- Deep cleans c-pap mask and short hose thoroughly
- Unlike ozone or UV cleaners which only disinfect the top layers and do not remove debris, the ultrasonic c-pap cleaner deep cleans mask and short hose inside and out
- The ultrasonic cleaner generates cavitaion which are millions of air bubbles which implode and dislodge debris from inside of crevices and hose
- Powerful 60W ultrasonic stack transducer generates powerful ultrasonic waves. 110V for North America
- Tank size 9.6"x5.9"x3" fits a short hose and a mask
- For 6'-long hose, larger models such as P4831-CPAP and P4862-CPAP are more appropriate
- For large face mask and water chamber that are taller than the tank, dismantle them or clean them one side first then turn them upside down to clean the other half
User questions & answers
Question: | Where do you get the cleaning tablets |
Answer: | This product is a pre-wash solution. Use about a teaspoon of solution in a bowl of hot water, then pour the solution into the hose from the bowl. Let it sit 5 minutes, then rinse with hot water. Hose is now ready for regular wash. I use ivory liquid dish soap for 2 or 3 passes, and finish with several passes of hot water for the final rinse. To dry your hose after cleaning, hang it over the back of a door and let it dry out for 5 hours. Shake it several times during the 5 hours to help the water move out. If still damp when it's bedtime, let your cpap machine finish it up. But 5 hours should dry your hose. (I use ivory dish liquid my choice, as it works well for me for the last nine years). By the way, you need to do this once a week at the minimum. The solution seems to make things even cleaner. I plan to use it on a regular basis. Its good to wash away that odor from new cpap equipment as well. |
Question: | How long of a hose does this fit? It says 6' is too long so what will fit |
Answer: | I fill the bathroom sink with a cap full of cleanser |
Product features
iSonic C-PAP Ultrasonic Deep Cleaners
Ultrasonic cleaner generates cavitation which are millions of air bubbles which implode and dislodge debris from the items submerged in water. iSonic Ultrasonic C-Pap Deep Cleaners clean in crevices and inside the hose. In comparison, ozone or UV cleaners only disinfect the top surfaces and they do not remove debris so debris are accumulated in the mask and the hose. FDA has issued a consumer awareness statement on 2/27/2020 against these two types of so-called c-pap cleaners. Each combo product includes a stainless weight bracket holds down the mask and the hose from floating. They have optional heaters that heats water up to 140F/60C. They are equipped with powerful ultrasonic stack transducers which are two to three times more powerful compared to wafer transducer used in small personal ultrasonic cleaners. A box of 48 cleaning tablets is included to help to deep clean, refresh the parts and remove odors.
Potential Risks Associated With The Use of Ozone and Ultraviolet (UV) Light Products for Cleaning CPAP Machines and Accessories: FDA Safety Communication
Date Issued: February 27, 2020
Using Ozone Gas Products that claim to Clean CPAP Machine Equipment and Accessories
Ozone (O3), sometimes called “activated oxygen”, is a gas that can be used to kill harmful bacteria. However, for ozone to be effective in destroying harmful bacteria, it must be present at a concentration above levels considered safe for humans...leaks can occur at tubing...
UV light may be used to disinfect surfaces in a setting where UV light does not escape to the surroundings. If products generating UV light do not shield the user from exposure, they pose a potential health hazard depending on the wavelength, intensity, and exposure time.
Product description
CPAP tubing naturally and regularly accumulates moisture, debris, and dust. This combination can create a breeding ground for bacteria, viruses, and mold. Failure to clean your CPAP machine may result in sinus infections, pneumonia, and exposure to allergens and mold. To prevent this, routine cleanings of your reservoir, hose, and mask are necessary. Fortunately, with Care Touch’s Pre-Wash Solution, cleaning your equipment has never been easier. Simply add a ½ tablespoon of the pre-wash solution with water, hand-wash the equipment, rinse thoroughly, and let it dry. (If you’re drying a tube, keep it vertical to prevent the water from pooling.)
Cleaning and sanitizing your CPAP equipment on a daily to weekly basis is important when it comes to maintaining its health and yours. Routine maintenance of your equipment should become part of your daily routine, but it can often be difficult to find the right cleaning product that won’t leave additional residue, or damage your skin. Care Touch offers you a way sleep soundly knowing that the air you’re breathing is clean, fresh, and crisp.
- CLEANS AND SANITIZES: Our Pre-Wash is perfect for removing dirt, debris, particles, smudges, germs, viruses and bacteria that may cause numerous complications if left alone. Unwashed CPAP equipment can lead to the growth of mold and bacteria, rendering your equipment potentially hazardous to your health. Regular cleanings will expand the life of your CPAP supplies and prevent illnesses caused by moldy masks or tubes.
- NEUTRALIZES ODORS AND SCENTS: This formula is scent free while eliminating foul odors that may naturally occur from regularly using your CPAP equipment. It is recommended that even new tubes and masks will require at least one cleaning before use, and this CPAP cleaner will keep eliminate the new plastic smell, while keeping your air fresh, crisp, and odor-free.
- IRRITANT FREE: Other CPAP soaps may contain harmful substances such as methlisothiazolinone and benzisothiazolinone which may irritate the skin or even cause breathing problems. Care Touch’s CPAP pre-wash solution has been carefully created with our customers in mind. Our unique formula is hypoallergenic, color-free, and safe for sensitive skin.
- CLEANS QUICKLY AND EFFECTIVELY: This cleaner will work on all types of face masks, reservoirs, tubes, or machines that can be cleaned with a liquid. Using soft dish soaps may leave residue or films, which extends the amount of time needed to clean your equipment. Care Touch’s solution makes the routine cleaning of your CPAP equipment a quick and easy part of your day. Each bottle contains 12 oz of cleaning solution, which will be more than enough to effectively clean it regularly.
User questions & answers
Question: | country of origin |
Answer: | Decyl glucoside is a surfactant that does not dry the skin. DMDM-Hydantoin is a mild anti-microbial agent |
Question: | How much do you use and is it used with 1 gallon of water |
Answer: | I tried to condense the tube. Mine got stuck also. |
Question: | how do you dry out the hose |
Answer: | These wipes are intended mostly for use with the disposable memory-foam mask cushions such as AirTouch F20, but can also be used to clean other medical equipment. So yes, in this regard it should be ok to use them with the actual Resmed Autose itself. I have the earlier generation Resmed Autoset S9 Series. |
Question: | how much water are ya'll using? Kinda ridiculous the instructions don't address the "other half" of the solution |
Answer: | Hello! Thank you for letting us know about this issue! Please contact us via Amazon on any orders placed within the past year. Many products, like these brushes, have return or replacement support past 30-days! |
- CPAP hose replacement is advisable at least every 6 months to improve the machine and treatment efficacy.
- Easy to replace and universal fit; Measures 22mm cuff, 19mm inside diameter and available in 6 and 10 ft variations to provide the additional room that you need to move freely while sleeping.
- Sturdy and built to lasts; These are high quality tubing replacement designed to provide a seamless CPAP tubing replacement and could last up to a few months.
- USAGE INSTRUCTIONS: Please see the product images and description on how to replace your CPAP tubing.
- ALL ORDER INCLUDES: 2 CPAP Travel Wipes and 100+ CPAP Comfort Hacks E-Book
User questions & answers
Question: | Does this hose work with Bipap machine too |
Answer: | it is Standard |
Question: | Does the one end of the hose movable? Does it twist as the hose turns so it does not fall off the mask |
Answer: | I do not know. I sterilized it prior to using it. |
Question: | What is the mm 15, or greater |
Answer: | Dont think so,, fits most all cpap machines, very sturdy hose, |
Question: | Does this hose works with the Air Med P10 mask |
Answer: | No. I’ve ordered multiple parts for the cpap and no rx needed. I believe u just need the rx for the machine itself. |
Product description
70 high quality 100% pure cotton wipes with high absorbency level. Purdoux CPAP Mask Wipes are made without the use of harmful chemicals and are designed for daily cleaning of your CPAP Mask. Our unscented wipes are made with ALoe Vera making it very soft for cleaning and moisturizing your hands.
- CPAP Mask Wipes - gently cleans mask silicone surface without damaging its softness
- 70 high quality 100% pure cotton wipes with high absorbency level
- Made without the use of harmful chemicals and are designed for daily cleaning of your CPAP Mask
- Designed for daily cleaning for CPAP mask. Alcohol, Solvent and Bleach-FREE!
- Unscented with Aloe Vera
User questions & answers
Question: | Does this contain formaldehyde |
Answer: | These are made in Isreal as stated on outside of container |
Question: | do thw wipes disinfect the mask |
Answer: | Looking at the ingredients, strictly speaking, no. I don't see any "antibacterial" active ingredients. However, most antibacterial ingredients may degrade the CPAP mask more quickly. Carefully wiping the mask physically removes most bacteria, but will not "kill" all bacteria. |
Question: | Is it antimicrobial? Is it safe to use on vinyl aka a massage table? (Alcohol, bleach and citrus free |
Answer: | I don't have a container available at this time but someone else answered the same question - Here's what the plastic bottle shows: water, glycerin, coco glucoside, vitamin E, aloe vera leaf extract, gluconolactone and sodium benzoate, citric acid, dehydroacetic acid, chamomilla recutita (matricaria) extract. I have been using these wipes on my CPAP mask (nose type) for several years and I am very satisfied with them. |
Question: | What are the ingredients |
Answer: | The label outside says so: fda approved facility |
- 19mm Diameter CPAP Hose with standard 22mm Rubber End connectors on both ends allows it to fit all CPAP Masks and Sleep Therapy Machines and Pillows.
- Can be used with Respironics , Resmed , Devilbliss , Fisher&Paykel and all other major CPAP/BIPAP machines
- Premium Hose is smooth on the inside due to the smooth bore design
- The flexibility of this tubing allows you easily move around the pillow and bed without causing a mask leak which will ensure proper sleep therapy.
- Recommended Replacement Schedule: Once every 3 months
User questions & answers
Question: | Does this come with the elbows and if not where can I order those |
Answer: | Not sure, but the tubing was terrible. It had a severs dent in one of the folds and the tubing would not straighten out. It would not let the air through the tubing. The tubing itself seemed thin. Unfortunately, my return period had elapsed by the time I used this item. If you haven't gotten this yet, be aware of the potential problems. |
Question: | Is this compatible (ends) with philips dreamstation cpap |
Answer: | Not in and of itself. Not sure if it could be used with a device that heats the hose. |
Question: | Is this tube fit for resmed N |
Answer: | Try measuring the diameter of the end of the hose in millimeters, on the one you already have. Some hoses for cpap are 15, narrower, and some are 22mm, the wider one. It can make a difference in the air flow pressure, so it does matter. Hope that helps you. |
Question: | My resmed hose has a twist lock on it. i don't see a way to remove it. am i missing something or do you have one for that style |
Answer: | All I can tell you is I turn a lot and this never gets in my way. But I think this is mostly due to my mask. This is a good quality hose. Not one of those light ones that fly away and feel flimsy. |
Product features
EASY TO USE
19mm Diameter CPAP Hose with standard 22mm Rubber End connectors on both ends allows it to fit all CPAP Masks and Sleep Therapy Machines. Premium rubber connectors make it easy to attach to most masks and machines, while providing a secure guarded seal no ensure that no air leaks out. This allows for optimal delivery of proper pressure while sleeping allowing you to sleep comfortably.
COMPATIBLE WITH NEARLY ALL CPAP, APAP, BiPAP AND BiLevel SYSTEMS
These tubes work on all machines that use Standard CPAP Tubing including most machines from DeVilbiss, Fisher & Paykel, AEIOmed, Somnetics, Puritan Bennett, ResMed, Covidien, Respironics, and others
MANY OPTIONS
No need to use extensions or connectors, the Mars Wellness CPAP tubing is available in 6', 8', and 10'. Also sold in 1 and 2 packs as well as the option of a tube and CPAP brush combo.
Simply scroll to the top of the page to see your options.
PREMIUM MATERIAL
Our CPAP & BiPAP Hose Tubing is made of high quality, long lasting materials. The innovative smooth bore inner core and crenelated outer surface combine to create a durable, flexible tube that provides a whisper quiet connection between your mask and your machine. These tubes are re-usable and washable with durable medical grade rubber endcaps create a tight, long lasting seal with less cracking over time than older plastic products
Product description
As a US NAVY Veteran and a CPAP user, I have been searching for a way to protect and secure my CPAP mask before and after each use, usually I just hang it by the bed or place it on top of the night stand collecting dust, dirt, pets hair, other nasty airborne particles, and other crazy things. CPAP manufacturer guidelines suggest to clean the mask every day, but let's be honest who really does it before each use. I asked around and found out that most of the CPAP users have the same problem and don't want to spend hundreds of dollars to buy something useful , so we bounced ideas and created a simple yet effective product. The CMC - CPAP Mask Cover
HIGH QUALITY MATERIALS - The CPAP Mask Cover are made from the 3 layers of finest materials. Their nylon fabrics act as filters and bacteria barriers. The foam serves as insulation and the lining is BPA Free material
PROTECT YOUR CPAP MASK - These CMC efficiently protects your CPAP Mask from dust, dirt, airborne particles, water, other liquids, animal hair, and much more. With the foam in between the lining, this will create additional layer of protection from accidental drop and extend the life of your mask.
COMPATIBILITY - Available in one size. 14" High x 10" width . Fits on most CPAP and Bipap Mask.
100% GUARANTEE - Your order comes with peace of mind due to Amazon's 100% guarantee. If you are unsatisfied for any reason, simply send it back for a full and complete refund.
This product will not sanitize your mask. Please refer to the mask manufacturer for cleaning, care & maintenance guidelines.
This product is not design to fit a full face mask
By LSC Products - A Serviced Disabled Veteran Owned Small Business.
- PROTECTS YOUR CPAP MASK from dust, dirt, airborne particles, water, animal hair, and much more.
- 3 LAYERS of High Quality Material - act as filters and bacteria barriers.
- EASY TO USE: Simple yet effective design that protects your mask without removing the hose.
- Made By LSC Products - A Service Disabled Veteran Owned Small Business.
- 100% GUARANTEE: If you are unsatisfied for any reason, simply send it back for a full refund.
User questions & answers
Question: | Will this bag hold a full face mask and tube |
Answer: | It may hold the tube. It definitely will hold the mask. The bag is kind of tight. |
Question: | Can this be used with an ozone disinfection station to hold the mask during the process |
Answer: | Not sure what that is but it's big enough to put a full face mask in it..i have the nasal mask and I put majority of the tubing in it as well still connected to my cpap machine.. |
Question: | Can this bag be used while cleaning the cpap mask and tubing |
Answer: | Yes |
Latest Reviews
View all
A Birthday Place Friends Plays
- Updated: 03.06.2023
- Read reviews

Light Luggages
- Updated: 12.02.2023
- Read reviews

Drill Bits
- Updated: 01.01.2023
- Read reviews

Tech Pouch For Women
- Updated: 24.04.2023
- Read reviews

Liquid Vitamins For Cats
- Updated: 10.07.2023
- Read reviews