14 best microphone with stands

Product description

Gator Frameworks Series desktop mounted microphone boom stands are the clutter-reducing stand solutions perfectly suited for broadcasters, podcasters, content creators, radio hosts, and on-air personalities. Each boom arm includes both a clamping and mounting base attachment mechanism to best accommodate your particular setup needs and swivels a full 360-degrees. All stands are engineered specifically to reduce noise brought about from moving parts and can be adjusted to hit desired angles, providing you with quiet and easily customizable mic placement options. Concerned it won’t hold up your large-diaphragm mics? Ditch the worry, for all models are designed to bear the weight of the heaviest mics in your collection, making the desktop mic boom stand series by Gator Frameworks a group of rugged stands you can truly count on!

• Desk-Mounted Broadcast Microphone Boom Stand for Podcasts & Recording
• Spring-Loaded Articulating Arm with 2. 4 lbs. /1. 1 kg Max Weight Capacity & 38. 6“/980mm Max Extension
• Easily Mounts or Clamps to Desks, Tables & Similar-Sized Surfaces 2. 17”/55mm Max in Thickness
• Black Powder-Coated Steel Construction with Metal Coil Springs
• Standard 5/8”-27 Mic Threads for Connecting Most Podcast and Vocal Microphones, Including Shure SM7B, Shure MV7 Models

User questions & answers

Question:	Do you need to download a software and yes which one
Answer:	Hello, No - This is a microphone boom arm and requires no software to be used as intended. If you have any other questions, please reach out to us directly. Thanks!
Question:	What is the diameter of the stem that slots into the desk clamp
Answer:	It's a little over 3/8 of an inch.
Question:	i have a question with this mic arm work with the audio technica at
Answer:	Hello, Yes, an Audio Technica AT2035 should work just fine with this boom arm. If you have any questions, please reach out to us directly. Thanks!
Question:	Can I easily remove the xlr cable and replace it with my preferred cable or if the cable goes bad
Answer:	Hello, Removing the cable in this product would require knowledge of how to solder an XLR cable back together. The Cable built into this is put together inside the housing at the factory. Because of this we would not recommend trying to take this apart and remove the cable. This is an issue we are bringing up to our product team, and may be improved upon in the future. However, for now our answer remains as no. If you have any questions, please feel free to reach out to us at [email protected]. Thanks!

Product features

360-Degree Rotation

Full 360-degree rotation. Engineered to produce minimal sound when moved. (reduces the potential for interruptions during sound-sensitive recordings)

Versatile Mounting

Includes both a clamping and fixed mounting base attachment to best accommodate your particular setup needs

Threaded Mount

70mm threaded boom end with easy angle adjustment

Coated Steel

Black-powder coated steel construction with internal metal coil springs.

Gator Frameworks Deluxe Desk-Mounted Broadcast Microphone Boom Stand for Podcasts & Recording (GFWMICBCBM2000)

Gator Frameworks Series desktop mounted microphone boom stands are the clutter-reducing stand solutions perfectly suited for broadcasters, podcasters, content creators, radio hosts, and on-air personalities. Each boom arm includes both a clamping and mounting base attachment mechanism to best accommodate your particular setup needs and swivels a full 360-degrees. All stands are engineered specifically to reduce noise brought about from moving parts and can be adjusted to hit desired angles, providing you with quiet and easily customizable mic placement options. Concerned it won’t hold up your large-diaphragm mics? Ditch the worry, for all models are designed to bear the weight of the heaviest mics in your collection, making the desktop mic boom stand series by Gator Frameworks a group of rugged stands you can truly count on!

Product description

The Gator Frameworks ID Series microphone stand was designed with innovation, style, functionality, and durability in mind! The eye-catching GFW-ID-MIC stand is the flagship model of the Gator Frameworks line of microphone stands. Gator’s Frameworks ID series mic stand features a fully adjustable 26” telescoping boom with two cam locks for adjusting as well as a twist-able boom end cap that adjusts the microphone angle for perfect placement. The ID series mic stand also features durable soft grip knobs including a quarter turn twist clutch for quick and easy height adjustment. The GFW-ID-MIC tripod base includes a stylish security design with red end caps for visibility in low lit venues. The tripod base is easily closed with a cam lock that allows the stand to collapse into a cylindrical shape for clean compact storage.



The Gator Frameworks GFW-ID-MIC microphone stand is designed to fit both U.S. and Euro style mic clips and fits popular models of microphones from brands such as Shure, Sennheiser, AKG, Audio-Technica, Samson, Blue Microphones, Behringer, CAD, Rode, Audix, Neumann, Electro Voice, Royer, and many others.



Gator Cases is known for manufacturing innovative products designed to protect! We offer products with a wide range of available sizes, materials, and protection levels, for all types of instruments and gear including Frameworks stands, Rackworks install racks and accessories, and Protechtor drum cases. It isn't hard to find a great reason why Gator should be the brand you trust to protect your equipment for life!

• Neatly Folds into Cylinder Shape
• Easy One Handed CAM Operation
• 26" Telescoping Boom
• Boom Adjusts with Easy Close CAMs
• Cable Management

User questions & answers

Question:	I was just about to order, yet the price just went up. anyone else notice? drat! now i can't get it for awhile
Answer:	Worth every penny. I have owned 6 different mic stands and this is by far the best.
Question:	can this double as a handheld boompole
Answer:	I guess, I think base comes off be easier to handle. As a stand it's excellent though
Question:	Is it solid enough for a condenser studio mic
Answer:	I use these stands with the Neumann TLM 102 and TLM103s in studio and Neumann KMS105s at gigs. If you have heavier condensers, and studio isolation accessories that are stand-attached, you may need a boom stand with a counterweight such as an Atlas or studio boom counterweight stand specific for the purpose... Hope this helps...
Question:	Two questions: (1) Does this come with a carrying case or not? and (2) How long is this when completely folded
Answer:	No, it does not come with a bag. It's about 3 ft when folded up. I actually have a gig bag that's 4 ft and it fits nicely. I love the weight and durability of the gator stand.

• 【UNIVERSAL MICROPHONE TRIPOD STAND】The sturdy tripod base keeps the mic stand upright and balanced, stable and non-slip. The high-quality thick steel pipe bracket is made of metal structure, which is strong and durable. HEIGHT ADJUSTABLE:This tripod stand can be extended and adjusted height to about 6 feet. Suitable for people with height of 6.5 feet.A very practical microphone stand.
• 【360°ADJUSTMENT OF GOOSENECK HOSE】The metal gooseneck hose length is 40.6cm/16inch. The gooseneck arm is adjustable and pivotable, and the height can be adjusted freely,suitable for adults or children.The gooseneck arm makes this microphone stand very flexible and easy-to-use.
• 【2 Mic Clips & 2 Cable Clips】The mic stand comes with 2 different styles of USA standard microphone clip holders(5/8-Inch mic adaptor and threading).Came with 1x3/8" to 5/8"screw.Suitable for most microphones on the market. With 2 clip-on cable holders to prevent wire confusion.
• 【WIDELY APPLICABLE & PORTABLE】The microphone floor stand tripod is not only suitable for meeting rooms, speeches,karaoke singing and guitar band performance,but also live broadcasts, online lessons, etc. It is very convenient to use and doesn't take up desktop space.The tripod can be folded for storage,comes with a shoulder bag, it's easy to carry, you can take it to any performance site at any time.
• 【WORRY-FREE SHOPPING】The microphone tripod stand comes with an installation manual. You can install and use it quickly. We offer a 30 days money-back guarantee, Worry-Free purchase. If you have any questions, please contact our customer service. We have been committed to providing high-quality products and customers with satisfactory services. Thank you very much for your support.

User questions & answers

Question:	How low can this mic stand be adjusted to? I want it to hold mic for when I am seated down playing cello or when I’m on the floor playing singing bowl
Answer:	Yes! Attach your Blue Snowball or Blue Yeti with the 5/8"-27 male to 3/8"-16 female threaded screw adapter included.
Question:	Can a karaoke mic fit in the mic holder
Answer:	Can someone post a picture how to connect this microphone arm to hyper X Quad Cast ?

Product features

GOOSENECK MICROPHONE STAND

Microphone Stand Tripod Adjustable Height up to 6 Feet Gooseneck Mic Stand Tripod Microphone Boom Stand with 2 Standard Mic Clips and 2 Cable Clips

FEATURES

• Sturdy,Stable and Non-Slip Metal Tripod Base.
• Gooseneck Metal Hose- Adjust Height and Direction Freely.Strong Flexibility.
• Universal Handheld Microphone Compatibility (Come with 2 Standard 5/8 Inch Mic Clips).
• Comes with 2 Cable Clips - Prevent Wire Confusion.
• Convenient Tripod Floor Standing Mount Design-Telescopic Adjustment.
• Easy to Disassemble/Assemble/Store/Transport.
• Perfect for Home, Office ,Studio or Performance Venue, etc.
• Happy Shopping, After-Sales, If You Have Any Questions, Please Feel Free to Tell Us Via the Amazon,Thanks.

MIC STAND

We are committed to creating high-quality products, and the pleasant experience of customers is an affirmation of us.

This gooseneck tripod stand made of metal structure-Sturdy, Stable and Durable.

You can adjust the gooseneck quickly and freely- to get the height that suits you and the direction you want.

Wish you have a more comfortable state during live broadcast, speech or performance.

Product description

The Hercules MS401B tilt base microphone stand is equipped with a Quik-N-EZ height adjustment grip, making 1-handed adjustments a breeze. An internal locking mechanism prevents slipping. Simply grab the EZ grip and adjust the stand up or down. The tilt base mic stand also boasts a Quik-N-EZ adapter for instant attachment of the mic to the stand just flip the lever down to attach and up to remove. Works on 5/8" tubes and is rubber lined for a secure grip. The Tilting Base with Level Legs gives you fully adjustable stand angle and swiveling legs that fit around other stands, drums, and stage equipment. Features Quik-N-EZ adapter Quik-N-EZ Height Adjustment Grip Tilting Base with Level Legs Height: 40.6"-66.1" (1030-1680mm) Weight: 8 lbs. (3.6kg)

• Brand: HERCULES
• Quik-N-EZ adapter
• Quik-N-EZ Height Adjustment Lever
• Tilting Base with Level Legs
• Height: 12.4"-18.7" (315-475mm)

User questions & answers

Question:	Hi, I use a shure beta 56a which is a heavy mic. Other stands with the quick height adjust always start to droop. Can this stand handle the weight
Answer:	I have 3 of these. Two of them are fine and stay up. The other started dropping on its own. I went to the Hercules website and did not see any way to get warranty service. I think you need to go through the dealer you buy the stand from. I was able to cut and place a piece of rubber on the expanding joint inside the stand that gives the stand more tension and keeps the mic from slowly dropping down. To get to the point: Yes, it should hold the mic up, but it may fail over time. If it fails, it will slowly creep downward and should not just drop suddenly. All of my vocal mics are heavier than the Beta 56A.
Question:	I use the i pad holder made buy herc and a pedal board. If i tilt it and mount my ipad holder as well as the mic will it tip
Answer:	If you are concerned about the weight of the iPad, holder and mic -- will it tip? Absolutely NOT... the leaning feature (which is great) is in alignment with the long foot... The Herc is my favorite tripod, I use it over many much more expensive Video Camera tripods... it is stable, never needs sandbagging... love this thing.
Question:	could i put a mic in it and use while playing the cello? would i be able to get it to reach around to my mouth without interfering with my bow hand
Answer:	It's very sturdy and you can lean this mic stand toward you by quite a bit, but I still think it might interfere with your bow hand. I think a boom mic stand might be a better choice.
Question:	I use a heil fin mic and a stream 8 tablet will this stand hold these items
Answer:	Note: if you plan on tilting the stand forward, it will not hold the tablet but will easily tip over. If you are using it straight up and down, it will hold it fine.

Product features

Hercules MS401B Tripod Tilt Microphone Stand

The Hercules Transformer Mic Stand is ideal for overhead drum applications. It can also fit around other stands and is perfect for lead vocals. It features the EZ mic clip, EZ height adjustment lever, tilting base, and swivel legs.

Product description

The center stage from Nady is a neodymium dynamic microphone with mic clip and tripod stand. Advanced high-output neodymium cartridge provides maximum clarity and definition, even in noisy environments, unidirectional cardioid pattern reduces feedback, special-design internal cartridge mount for lowest handling noise and quiet performance, withstands highest sound pressure levels without overload or distortion, rugged all-metal construction, external on-off switch on handle, and includes 20 foot microphone cable. Also includes mic clip and sturdy metal tripod adjustable for performers up to 6ft four inches. The center stage can be used with any standard mixer, powered Mixer/amp or mic preamp.

• All-in-One kit includes a high-performance microphone, sturdy metal adjustable tripod microphone stand with clip, and a 20 ft. cable (XLR to ¼” connectors)
• Dynamic microphone provides professional sound quality with rich, full-frequency audio. Advanced high-output neodymium cartridge provides clarity and definition, even in noisy environments, while cardioid pattern reduces feedback
• Withstands high sound pressure levels without overload or distortion
• Rugged, all-metal construction - External on/off switch on handle
• Microphone stand features tripod base and adjustable height (34-60”), and folding legs for easy transport and storage.

User questions & answers

Question:	Is it a kiddy kind of microphone? or is it a n adult kind
Answer:	It's more an adult than a kiddy!!!! I would give it a rating of 7 out of 10 comparing it to a kid or an adult. Other words, it isn't one you would find on a professional stage but it is not a kids either. Hope this helps.
Question:	What is the length when folded up? I want to buy carrying a case for it
Answer:	I really don't know I gave it as a gift
Question:	what is the height minimum and maximum? Does the height adjust
Answer:	it adjusts and is used by my 9 year old (4 foot something) and can go as high for about a 5 7" person
Question:	Will this work, out of the box on its own? Or do I need to purchase an amp. This is for a 4 year old and 6 year old as a toy
Answer:	You will need an amp. I bought the Danelectro N10B Honey Tone Mini Amp in aqua (although they are selling it in burgundy on amazon right now) and then also a cable.. I think everything total came to about $40? At the time my kids were 5 & 6 and 9 and the younger two used it a great deal. It has a nice quality sound to it and the amp is tiny but sounds great for the price! Hope that helps! Oh and I think just because Philly George uses it for an adult purpose in a studio does not mean it can't be used for kids as well. Microphones marketed specifically to kids are notoriously poor quality, this one does the job well and has stood up to my kids' not so gentle usage very well. Good luck!

Product description

The Rockville pro mic kit 1 was created in response to a need we saw in the market for a very high quality microphone at an affordable price. We feel there are a lot of good mics around from reputable brands that sound great, but they are very expensive. When we looked at the cheaper ones on the market from both reputable and entry level brands; we were not impressed. We sent our product developers on a mic testing journey. A lot of our employees here at Rockville love to do karaoke, so it was not long before we found a mic that we all fell in love with!



You may be asking yourself; so what makes this mic so good? Well, there are 3 main components that make a mic sound the way it does. The cartridge, the magnet, and the mic cable. Our mic uses an M-56 cartridge which has a neodymium magnet. This Particular combination of components supplies better sensitivity; which means your mouth will not have to be on the mic for it to pick up the sound. Our components supply more than Just a great pickup pattern, They also has very little background noise, and great tone.



We pay a lot of attention to detail. We could have saved lots of money and got our cost down by including a cheap cable, but we know how important the cable is. We are very Passionate about our products and we really have a lot of respect for our customer’s standards. For this reason, we included in this package a 100 % OFC copper cable. There is no aluminum in this cable! This means the cable will last longer and will sound A Lot better. Ultimately what you get Is a distortion free signal. In addition we use a true gauge mic cable with proper thickness.



The body of the microphone is also something we paid a lot of attention too. We did not want it to be too light and feel cheap. We made a nice solid metal microphone. It has a great feel to it. We could have went with plastic or cheaper metal, but we wanted to create a mic that we ourselves would want to use.

• Rockville Pro MIc Kit 1 - High-End Metal Microphone+Mic Stand+Carry Bag+Cable. Mic Features: M-56 Cartridge. Full metal mic body. Type: dynamic. Neodymium magnet. Polar Pattern: uni-directional.
• Frequency Response: 80 - 13Khz. Impedance: 600 Ohms ± 30%. Sensitivity: -72 ± 3dB. Mic Stand Features: High quality metal mic stand. Made of strong iron tubes! Black Painted Finish.
• Adjustable height: 31.5 - 59 inches. Weight: Only 2.4 LBS! Plastic feet covers to stop unwanted sliding. Plastic adjustable connector. The bottom part of base is made of 20MM thick iron.
• Top part of base is made of 15.2 MM thick iron. Feet are made of 19MM iron . Bag Features: High quality canvas. Comfortably holds microphone, mic stand, cable and other mic accessories.
• Other bundles include plastic bags, this canvas bag will protect better and can be thrown around without damaging your equipment. Internal belt ties to lock the mic and cable in place and separate it from the stand.
• Internal separator separating the mic from the stand to eliminate them rubbing together. Internal sponge padding for protection the gear in the bag. High quality zipper. Bag prevents equipment from getting scratched.
• carry straps make it easy and comfortable to transport. Straps were built as handles to carry or as shoulder straps to carry them like a backpack. Bag is made with scratch proof canvas. Bag can hold up to 22 pounds of gear!

User questions & answers

Question:	How does this mic work? For example, is an amplifier included
Answer:	You need your own amplifier. I hook mine up to a boom box type speaker. The mic works fine if you speak directly into it, but it doesn't pick up sound well from the side.
Question:	Is this good for street preforming
Answer:	Yes (but need some type of power or PA)
Question:	What size of thread screw is the microphone holder to the stand
Answer:	It has a threaded coupling included that allows you to use it with 2 sized threads. Not sure if exact size. 1/2" maybe.
Question:	what can it plug into
Answer:	It's a low impedance dynamic mic, and can be plugged into anything with an XLR type connector.. It will need a preamp in order to work with an amp, boom box, computer, etc. that requires "line level" input. It's a good value for the money.

Product features

Rockville Pro Mic Kit 1 - High-End Metal Microphone+Mic Stand+Carry Bag+Cable

The Rockville pro mic kit 1 was created in response to a need we saw in the market for a very high quality microphone at an affordable price. We feel there are a lot of good mics around from reputable brands that sound great, but they are very expensive. When we looked at the cheaper ones on the market from both reputable and entry level brands; we were not impressed. We sent our product developers on a mic testing journey. A lot of our employees here at Rockville love to do karaoke, so it was not long before we found a mic that we all fell in love with!

You may be asking yourself; so what makes this mic so good? Well, there are 3 main components that make a mic sound the way it does. The cartridge, the magnet, and the mic cable. Our mic uses an M-56 cartridge which has a neodymium magnet. This Particular combination of components supplies better sensitivity; which means your mouth will not have to be on the mic for it to pick up the sound. Our components supply more than Just a great pickup pattern, They also has very little background noise, and great tone.

We pay a lot of attention to detail. We could have saved lots of money and got our cost down by including a cheap cable, but we know how important the cable is. We are very Passionate about our products and we really have a lot of respect for our customer’s standards. For this reason, we included in this package a 100 % OFC copper cable. There is no aluminum in this cable! This means the cable will last longer and will sound A Lot better. Ultimately what you get Is a distortion free signal. In addition we use a true gauge mic cable with proper thickness.

The body of the microphone is also something we paid a lot of attention too. We did not want it to be too light and feel cheap. We made a nice solid metal microphone. It has a great feel to it. We could have went with plastic or cheaper metal, but we wanted to create a mic that we ourselves would want to use.

For the mic stand we include in this bundle, we made sure the height adjusts high enough and that the stand is thick and sturdy enough for anyone who will use it. We use plastic feet covers to stop unwanted sliding. The stand tubing is made of iron. It is rock solid. We gave the stand a beautiful black painted finish. Best of all, the stand is totally portable weighing in at only 2.42 lbs!

We pay a lot of attention to detail so I would like to mention why we went with a canvas carry bag. We sourced multiple bags and had multiple options of bags. We ended up spending more money and going with the better bag. It’s a great quality canvas travel bag that will hold the mic, the stand, and all your mic accessories/cables. The bag has 2 carry straps which allow you to carry it with your hands or on your shoulders like a backpack. We also included internal sponge padding and straps to separate the mics and the stand and keep them both from rubbing against one another. You will be impressed with every component we include in this bundle from the mic to the bag.

Features:

Product description

A handy value pack consisting of three BL3 boom stands, three 18-foot cables and a nylon carry bag.

• Light-weight collapsible tripod boom microphone stands
• 18-foot gold plated XLR microphone cables
• Nylon carry bag
• Country of Origin: China

User questions & answers

Question:	What are the dimensions of the carrying case
Answer:	Don’t know the dimensions but the stands barely fit need to remove Mic holder to fit on bag and only 3 fit.
Question:	Do these stands come with mic clips, one review said yes, but another no
Answer:	No clips. But on the plus side, mine came with 5/8inch female to 1/4 inch male thread adapter so it works with both styles of clips.
Question:	Are the XLR cables of good quality
Answer:	I haven't had a problem with the cables. They have worked as well as any others we have hooked up to.
Question:	Does the bag have storage / padded compartment for mics, or just the stands
Answer:	There is room in the bag for mics, but no separate compartment.