Product description

Our best selling stand! This Euro boom boasts a hybrid sheet metal and composite leg housing, making it virtually unbreakable. With a removable boom arm and its ability to fold flat, This stand is a must for every member of the band. Features a zinc mid-point clutch and black finish.

• Our best selling stand, the MS7701B features a steel-reinforced plastic leg housing which offers less weight and exceptional strength
• Folding legs with plastic endcaps for durability and reduced floor vibrations
• Steel midpoint locking clutch adjusts height from 32" to 61.5"
• 30" removable boom arm allows for easy positioning

User questions & answers

Question:	Do I need to buy a microphone mount for this? Will any fit on there
Answer:	Yes, you need a mount. There are several on amazon - look on the stand page under what other people bought ..., or do a search of MS7701 microphone adapter or mount.
Question:	will the stand work with a blue yeti
Answer:	It absolutely does. This stand screws in perfectly to the Blue Yeti, and it hold the mic up no problem. Just make sure you tighten all the screws.
Question:	Would this be too heavy to use as a boom mic stand for a movie
Answer:	Actually it's too light and tends to fall over. It also would be a terrible way to hold a boom mic. If you need a low budget boom mic holder use a painters extension pole and rig up a shock mount from the mic from rubber bands and PVC pipe cult into rings.
Question:	Can you unscrew the boom arm and use the base as a normal vertical microphone stand? Does the vertical part end in a standard 5/8" thread
Answer:	Hi Kevin. Sorry for the late response. Yes you can unscrew the boom. The base of the stand is wider than a standard round base so you would have to be careful not to step on or bump the base leg as you would be standing closer to the microphone stand without the boom extension. Hope this helps.

Product features

On-Stage MS7701B

Our best-selling stand! The MS7701 is designed to go wherever your music takes you. This model boasts hybrid sheet metal and composite leg housing, making it lightweight and unbreakable. A removable boom arm and fold-flat storage/portability makes this stand a must for every member of the band. This model is available with a black shaft (MS7701B) or chrome shaft (MS7701C).

Product description

An Amazon Brand

• Tripod boom microphone stand holds microphone securely in place (microphone clip sold separately)
• Long boom arm with molded plastic counterweight for horizontal placement
• Versatile design folds flat for use as straight mic stand
• Sturdy steel construction; ultra-light for easy transport
• Compatible with 3/8-inch to 5/8-inch adapter; clip-on cable holder keeps cords out of the way
• Please note the following while using this product: Max microphone weight ≤ 1KG (2 lbs). Microphone end of the boom should be lined up with one of the legs. Do not extend length further than 2/3 of the whole boom. To be used only on flat ground. If using heavy microphone, add a sandbag or weight on the rear of the boom to provide balance.

User questions & answers

Question:	Does It work with a shure sm7b? I bought a desk mic stand but the weight of the microphone pulls it down
Answer:	It should work with any mic. I have a blue baby bottle mic I use with it. It can with an adapter so it should help
Question:	Does it come with a carrying bag
Answer:	No it doesn't.
Question:	What size is the thread
Answer:	I just want to clear things up, this is a 5/8 thread, I know it’s confusing when it says “3/8-5/8 adapter” but What they are saying is that you can get a male 3/8 - female 5/8 adapter thereby reducing the thread size
Question:	What is the tallest comfortable height this stand can get, measured from floor to clip
Answer:	Well, I just measured it and....with the stand fully extended and the boom vertical (parallel to the stand shaft) and also fully raised, the mic clip is just over 7 feet above the floor. Whether that is comfortable or not really depends on how heavy the mic or whatever you're going to put up there is.

Product features

Adjustable Height and Boom Arm

As a straight mic stand, the height can be easily adjusted. When used with the long boom arm, the horizontal extension and tilt can be adjusted.

Tripod with Rubber Feet

The tripod stand provides stability, while its rubber feet reduce floor vibration, promote added stability, and protect bare-floor surfaces.

Versatile Compatibility

The microphone stand offers compatibility with a 3/8-inch to 5/8-inch adapter (not included), making it a great choice for a variety of microphones.

Clip-On Cable Holder

The mic stand provides two clip-on cable holders for neatly running and attaching a microphone power cord along the stand.

• Tripod boom microphone stand holds microphone securely in place.
• Long boom arm and height adjustment for different performance needs.
• Ultra-light for easy transport with carrying bag.
• Accerious: one microphone clip and three wire ferrules.
• Patented design folds flat for use as straight mic stand.

User questions & answers

Question:	Can this hold a karaoke microphones
Answer:	Yes, it is fine for karaoke mics. You may have to change the mic clip, however. That depends on the size of your mic. It needs to have a snug fit so it doesn't slip out, but is still easily removed.
Question:	Is this compatible with the Audiotechnica AT
Answer:	I am sorry I don't know anything about the Audiotechnica AT2020
Question:	Will a thick wireless mic fit in the mic clip
Answer:	I doubt it. I have a Shure mic that came with a small screw on handle and slides right into the holder. Anything bigger probably wouldn’t fit.
Question:	What are the dimensions for the included carrying bag ; both inner and outer dimensions
Answer:	Its not the full size of any Stnd mic stand - when i saw the box, for real i didnt think it couldve been a full stand. Im not measuring it, but its about size of a drum stick bag

Product features

GLEAM Tripod Boom Microphone Stand

The height and length of Gleam microphone stand can be greatly expanded, which is suitable for various occasions. We provide a storage bag for you to carry out. Please feel free to use our products. Thank you for your support.

Carrying bag

We have provided you with a carrying bag, which is convenient for you to carry outside.

Wire hoop

The product comes with three wire hoops. You can use them to tie the microphone cable so that it doesn't trip over.

Height adjustment

The height of the body bracket can be adjusted between 23 and 43 inches. Whether sitting or standing, it can meet your needs.

Length adjustment

The length of the expansion pipe can be adjusted between 4 and 30 inches, which is suitable for your needs in different occasions.

Product description

The Gator Frameworks GFW-MIC-0821 short microphone stand with a weighted base is the perfect multi-use mic stand for recording or live sound applications. The weighted base is useful when using heavier mics that need additional balance. The Gator Frameworks short microphone stand can be used for floor applications such as kick drum / bass drums, guitar amplifier cabinets, bass guitar amplifier cabinets, snare or tom bottom, keyboard amplifiers, theater, boundary, and many other applications. The GFW-MIC-0821 includes a 16” single section boom arm, twist clutch height adjustment, cable management clip and a no slip, vibration reducing gasket. The Frameworks GFW-MIC-0821 also fits both U.S. and Euro size standard microphone clips.

The GFW-MIC-0821 has a maximum height of 23” and is constructed of heavy-duty steel and soft rubber twist adjustment knobs for added comfort while loosening and tightening. The base dimensions are 4.5” X 8”.

Gator Cases is known for manufacturing innovative products designed to protect! We offer a wide range of available sizes, materials, and protection levels, for all types of instruments and gear including Frameworks stands, Rackworks install racks and accessories, and Protechtor drum cases. It isn't hard to find a great reason why Gator should be the brand you trust to protect your equipment for life!

• Short Microphone Stand With A Compact Base
• Max Height: 23 Inches / 584 mm
• Includes 16" Single Section Boom
• Base Weighted For Balance And Stability
• Cable Management Included.Base Type: U-shape
• 4.5" X 8" Weighted Base

User questions & answers

Question:	Will this fit the presonus M7 mic
Answer:	Sure. It will fit any standard mic in the same way as a regular stand.
Question:	What are the dimensions of the base
Answer:	4.5 x 8". Heavy too. Mine has been extremely sturdy and very adjustable.
Question:	What is the base made out of, and how does it do with vibration? (for use on a computer desk
Answer:	Hello Kade. The base is powder coated and made from cast iron. It features a rubber gasket on the bottom to absorb vibration. The base is weighted so it really is intended for floor use but should be ok if used on a computer desk. Thanks!
Question:	My fifine mic has a 3/8" female adapter. this stand's mic connector has an externally threaded 5/8" thread and internal 3/8" thread. how to fit
Answer:	You should have received the two-piece threaded adapter with the stand. If you remove the internal threaded insert, it should fit. I removed mind and screwed the mic holder into the stand head.

Product features

Soft-Grip Height Adjustment

Grab the soft-grip, ergonomic twist clutch and easily adjust the height with a simple quarter-turn. The convenient shape and texture provide the perfect grip for the active user or if you are sharing the mic with a guest.

Compact Weighted Base

The hefty, weighted base provides balance and stability to the low-profile kick drum and amp mic stand. The base includes a no-slip,vibration reducing gasket for better sound quality.

Single Section Boom Arm

The single section boom arm allows you to independently adjust the length and angle to the perfect position. The boom arm is equipped to fit both US and Euro mic clips.

Cable Management

Removable and adjustable cable management clips keep your setup clean, organized and safe.

Gator Frameworks Short Weighted Base Microphone Stand with Soft Grip Twist Clutch (GFW-MIC-0821)

The Gator Frameworks GFW-MIC-0821 short microphone stand with a weighted base is the perfect multi-use mic stand for recording or live sound applications. The weighted base is useful when using heavier mics that need additional balance. The Gator Frameworks short microphone stand can be used for floor applications such as kick drum / bass drums, guitar amplifier cabinets, bass guitar amplifier cabinets, snare or tom bottom, keyboard amplifiers, theater, boundary, and many other applications. The GFW-MIC-0821 includes a 16” single section boom arm, twist clutch height adjustment, cable management clip and a no slip, vibration reducing gasket. The Frameworks GFW-MIC-0821 also fits both U.S. and Euro size standard microphone clips.

The GFW-MIC-0821 has a maximum height of 23” and is constructed of heavy-duty steel and soft rubber twist adjustment knobs for added comfort while loosening and tightening. The base dimensions are 4.5” X 8”.

Product description

PylePro Model : PMKS5

Compact Base Microphone Stand

Microphone Stand - Universal Mic Mount with Heavy Compact Base, Height Adjustable (2.8’ - 5’ ft.)

Features:

Lightweight & Compact Mic Stand Style

Universal Handheld Microphone Compatibility

Convenient Floor-Standing Mount Design

Height Adjustable Tightening Clamp

Pivot Angle Adjustable Microphone Clip

Sturdy, Metal Stand Base

Disassembles for Easy Storage / Transport

Perfect for Home, Office or Studio Use

Some Assembly Required

What’s in the Box:

Adjustable Mount Arm

Microphone Clip

Stand Base

Technical Specs:

Microphone Clip U.S. Standard: M-6

Universal Screw-On Threading: Standard 5/8'' -inch

Construction Materials: SteelAlloy Base + Mounting Pole

Minimum Height: 2.8’ ft.

Maximum Height: 5.0’ ft.

Base Diameter: 9.8’’ -inches

Die-Cast And Steel ConstructionSleek Black FinishUltra-Light For Easy TransportMIC Holder IncludedHeight Adjustment From 33.5" to 60.24''Length Of Boom: 33.46''Weight: 9.92lbs

• HEIGHT ADJUSTABLE: Pyle compact base microphone stand smoothly quick and easy, raise or lower height adjustment from 33.5" inch to 60.24'' inches high. Also, Pyle used USA standard 5/8 x 27 external thread size
• RELIABLE STURDY BASE: It is solid die-cast and base for about 235mm in diameter. Pyle mic stand will provide stability and precise balance to avoid it from falling. And 9.92 lbs. counterweight for a stable microphone placement
• CONVENIENT DESIGN: This is an ideal mic stand for the musician that’s always on the go. It’s ultra-light pack up with sleek black finish is ultra-light for easy transport. It is also built compactly to be both durable for long term use
• STUDIO AND CONCERT USE: Perfect mic holder positioning and optimal pickup for the studio and concert performances. The Pyle PMKS5 is a class at its own
• WORRY-FREE SHOPPING: With the Pyle PMKS5, we are confident of the quality of our product, therefore, we offer a 30-day money back guarantee no questions asked

User questions & answers

Question:	so Im 5'11 is this mic stand tall enough to stand and record
Answer:	First of all. Congratulations on your height. I'm 5'-9. When the stand is fully extended the microphone (Shure 58) is pointing at my forehead. So I'm pretty sure with a tube style recording condenser mic, you'd be fine. It's a well made stand and as good as anything you'd buy at the massive guitar store.
Question:	Why is this described as having a "boom arm"? I see no boom arm in the pics. (A boom arm connects on a pivot and goes outward at an adjustable angle
Answer:	That is a very good question. If that is the exact item I ordered and received, it certainly does not have any such feature.
Question:	What is the total height from the floor to the top of the mic clip if the stand is in its lowest position? I'm trying to find a good stand for kids
Answer:	I don't have it available to measure right now, but the discription says 33.5" in lowest position. I believe that is correct. It's a nice solid stand. We are very happy with it.
Question:	does it make your microphone work without the amplifier
Answer:	No . A microphone is just a device to collect sound waves. To amplify it you need something maybe as simple as a bullhorn or plug it into your home stereo or into an amplifier. You cannot just connect a micro phone to a speaker and expect it to work.....they need something to amplify...hope this answer s your question....

Product features

Microphone Stand

• Lightweight & Compact Mic Stand Style
• Universal Handheld Microphone Compatibility
• Convenient Floor-Standing Mount Design
• Height Adjustable Tightening Clamp
• Pivot Angle Adjustable Microphone Clip
• Sturdy Metal Stand Base
• Disassembles for Easy Storage / Transport
• Perfect for Home Office or Studio Use
• *Some Assembly Required

Product description

The microphone windscreen is manufactured from an expensive acoustic foam material. It has a twofold benefit. Firstly, it can filter out effectively the noisy sounds generated by "b", "p", and "t" and also a variety of sounds generated in the background when audio is being recording. Secondly, it protects a microphone from moisture and dust.

The long-lasting and durable structure mic is equipped with a changeable positioning screw which can be clipped easily to a desktop with a thickness of 2".

The double-layered screen pop filter keeps the plosives like Ps and Bs down to a minimum and also lowers down the sibilance.

In the end, it is a winning combination for the actors and singers who desire to achieve the best performance there is. It is used widely in recording studios, broadcasting and stages as well.



Package included

1* InnoGear Microphone Windscreen

1* InnoGear Microphone Scissor Arm Stand [ Included the mic clip, table mounting clamp, and a screw ]

1* InnoGear Double Layered Screen Pop Filters



Note

1. The microphones are excluded from this package. As is the case, products such as Blue Yeti as well as Blue Yeti Pro are well-suited for the sponge cover. Depending on the size, it is suitable for other types of microphones, too. When the size is similar, it is compatible just as well because the sponge has some degree of elasticity. It can be enlarged or stretched a bit.

2. A mounting hole which is present on the Yeti mic is a bit bigger than the industry standard of 5/8".

• All-In-One Combo: Package includes all the items you need for studio recording and live sound, a microphone stand, pop filter and 1 Pack microphone windscreen
• High Quality foam microphone windscreen: Pop filter for filter out the harsh "p", "t", and "b" sounds and the sound of wind and other unwanted background noise to improve the quality of your audio recording.
• Heavy Duty Construction Mic Stand: Super-strong spring protects microphone from shaking, suddenly dropping and making noise. Comes with one table mounting clamp with protective layer of sponge, an adjustable positioning screw, can easily clip to any desktop up to 2” thick.
• Double Layered Screen Pop Filters: The first screen blocks air blasts as any pop filter normally would; The gap in between then disperses any remaining air pressure, so by the time it passes the second screen, the blast is easily contained to produce great quality recordings.
• Universal Compatibility: Equipped with clear manual instruction and high quality acoustic foam material, filter out all unwanted background noises. It works perfectly with Blue Yeti, Blue Yeti Pro, Snowball and other microphone.

User questions & answers

Question:	Will this fit the romer g track pro
Answer:	Yes it will
Question:	Does this work with th me razer seiren X
Answer:	Yes it does! I use it with my razer Seiren X and it works perfectly!
Question:	Does this work for the Fifine k669 usb microphone
Answer:	Very good
Question:	Can the Boom arm actually fit the Blue Snowball instead of the blue yeti straight out of the box
Answer:	There's an adapter that comes in the box that gets put on to the end of the stand that will fit the blue yeti.

Product features

Integrating nature and technology through innovation

InnoGear is a pioneer company in the art of aromatherapy, light, and music that will transform your routine life naturally. Equipped with easier, simpler, and superior diffusers and LED lighting products, we specialize in incorporating nature with technology as we aim to create innovative devices that can connect with daily lives easily and effectively.

• Foldable Arm Band: The adjustable microphone arm can be folded up and easy for you to carry around. This feature enables to adjust the suitable angle and height to show your perfect voice. Before adjusting the angle of the microphone arm stand make sure to loosen the knob first. Avoid rotating it by force as it can damage the screw threads.
• Upgraded Desk Mount: In comparison to the old versions, this zinc alloy desk mount is built with anti-scratch pad and wider mouth up to 2" to fit most desktop.
• The 5/8"-27 male to 3/8"-16 female screw adapter which included in the package fits for blue snowball.The Diameter of Microphone Clip is 1.10". Suitable for any stores, families, stage, studios, broadcasting and TV stations, etc.
• Heavy Duty Steel Structure: Super-strong spring with extra positioning screw, compact microphone arm stand designed for heavy duty carry. Max load: Approx.53oz/1.5kg.
• Note: The mounting hole on the Yeti Mic is sometimes just a tiny portion bigger than the 5/8" industry standard. You are suggested to use Thread Tape (included) to wrap around the mounting screw on your shock mount. This will effectively increase the thickness of the mounting screw, while still maintaining the actual screw thread and will enable you to connect to your Yeti.

User questions & answers

Question:	Can I put an Blue Yeti upside down on this mount without falling
Answer:	Can someone show me how to mount Blue Yeti? I can't figure out how it will hold Blue yeti.
Question:	Will if work for the rode nt usb1 mic
Answer:	i believe it will. the arm has standard small threads and comes with an adapter for larger threaded mics. it also came with plumbers tape, which can be used on the threads of your arm to make it a more snug fit.
Question:	Can this hold a blue snowball mic
Answer:	Yes! Attach your Blue Snowball or Blue Yeti with the 5/8"-27 male to 3/8"-16 female threaded screw adapter included.
Question:	Does it hold the hyper x quad cast
Answer:	Can someone post a picture how to connect this microphone arm to hyper X Quad Cast ?

Product features

InnoGear Adjustable Microphone Arm Stand

This microphone arm stand is made of durable steel. Being exceptionally light in weight, its position can easily be shifted on stage or moved easily from one place to another. From setup to take down to frequent loading and unloading, the durable microphone stand performs excellently and can be transported or stored easily. Moreover, the microphone arm stand’s feet help in reducing floor vibration, promoting added stability, and protecting bare-floor surfaces from scuffs and scratches.

Easy to adjust position and angle to show your perfect voice.

Max. Microphone Clip Diameter is 1.1"/28mm.

Soft Pad can protect from scratches.

• Compact and Weighted Base: With 4.3"x4.7" base, InnoGear desk microphone stand doesn't taking up much space. The base is weighted 1.32lbs for MAX load 3.3lbs when using heavier microphones that need additional balance. It is constructed of heavy-duty steel for long-term performance.
• Triangle Gravity Design: Unlike other mic stand with central gravity, InnoGear table mic stand provides more stability and precise balance to keep microphone from topple-over.
• Adjustable Height: This stand measures 10.2 inches in height and is adjustable up to 15 inches to allow for optimal mic positioning.
• Compatibility: Package includes 3/8" and 5/8" adapter, making it compatible with many microphones like Blue Yeti, Blue Snowball, AT2020, AT2020USB+, AT2035, ATR2500-USB, ATR2100-USB, etc.
• High Quality Shock Mount: It can protect your microphone all-around with high elasticity wrap roping desigh and reduce vibrations from traveling into the microphone.

User questions & answers

Question:	I am looking to mount a Fifine K690 on this stand. Will it fit
Answer:	Yes, mine fits. I used the mount that came with the k690 mic kit and attached it to the screw on the stand.
Question:	Would this work for a Focusrite Scarlett studio mic
Answer:	The Focusrite Scarlett studio Interface uses a broad range of mics, both condenser and dynamic, all sizes and address points!! I use 4 of these stands with 4 dynamic end address “Rode Podmics” and they hold just fine

Product features

InnoGear Weighted Base Desktop Mic Stand

The position you record your voice over in is critical because it definitely affects your tone. InnoGear desk microphpne stand allows you to sit comfortably and conveniently to record for long period of time. The metal body makes for the sturdiness and solidness of the stand, the height is easily adjustable from 10.2" to 15" with a locking clutch. The MAX load is 3.3lbs, with 3/8" and 5/8" adapter you can use it with any many microphones like Blue Yeti, Blue Snowball, AT2020, etc.

Weighted Base

Compact base dimension is 4.3"x4.7", it is plenty heavy to hold microphone steady even when you have it extended all the way. With soft cushion like padding at bottom, it can prevent and desk noise from transferring to mic.

High Quality Shock Mount

Made of all-around and high elasticity wrap, it can hold and secure your microphones, stops vibrations, such as toe-tapping, transmitting from microphone stands into microphone diaphragms.

Microphone Clip

The combo comes with a microphone clip, the max diameter of microphone clip is 1.10"/28mm. Suitable for any stores, families, stage, studios, broadcasting and TV stations, etc.

• 【All-in-one Microphone Stand】More accessories satisfy your various needs. The whole recording broadcasting equipment includes 1 x adjustable mic stand, 1 x Microphone Windscreen, 1 x Mic Shock Mount, 1 x Microhone Clip Holder, 1 x Double layer Pop Filter,1 x Screw adapter, 1 x Magic Tape, 1 x Table mounting clamp with sponge pad and 3 cable Ties.
• 【Foldable Design & Table Mounting Clamp】Designed for heavy duty carry. The adjustable arms can be fold up and easy for you to carry around. It allows you to adjust the suitable angle and height to show your perfect voice. With soft rubber pad of Heavy duty desk mount can be clamped to a maximum thickness of 2", fully protect table from any damage.
• 【Upgraded Dual Layers Pop Filter】Adoptering more fixed fram, the high quality pop filter provides you a whole excellent using performance. High density, good elasticity, durable for years of use, can filter out all unwanted background noises. Better protect your Blue Yeti and Blue Yeti Pro microphone.
• 【 Adjustable & Wide Compatibility】 The microphone boom arm rotates 360 degrees and offers a horizontal reach of 27 inches. GPED mic boom arm is compatible with Blue Yeti, Snowball or most standard-sized microphone. 3/8'' to 5/8''Screw adapter are line with industry standards, suitable for the Blue Yeti. Adjustable shock mount and universal mic clip also provide more possibilities for other microphones. The max load can up to 4.4pound/2kg.
• 【Multipurpose & 100% Satisfaction】Our boom mic stand is suitable for any stores, families, stages, studios, broadcasting and TV stations, etc. GPED aims to provide customer with the best service, we offers 30 days money back and 12-months service, please buy with confidence.

User questions & answers

Question:	Does this work with the Tonnor tc-777 mic
Answer:	Go back to the product description, and in the images, you’ll see one that has an example of all three mic mounting possibilities; looking at these, the option of holding the mic within the shock mount might show the solution that would work for you. It looks like it “might” work, but without that mic in hand, I can’t tell definitively... So proceed at your own risk!...
Question:	would this work with a jlabs mic
Answer:	I really think it should be no problem.
Question:	is it difficult to set up
Answer:	you can refer to the video related to this product
Question:	will the mic shock mount fit a fifine k
Answer:	I really think it should be no problem.

Product features

Heavy Duty Mic Stand

•With this special part, it provides the support with an upward pull. Compare with other old version mic stands, it has a greater carrying capability

•Four springs are the support for weight bearing. If you want more weight bearing, you can turn the spring forward by one degree

•The mic arm stand consists of two this adjustable arms of 35cm and it can be folded up and bended for better storage

Upgraded table mounting

•180° foldable arm and 360° swivel mount, the stand can be moved in full angle

•The table clamp with a layer of sponge to protect the desktop, you can add an extra latex washer to increase friction and protect the bottom of the desktop

•With a wider mouth, the width of the clamp up to 2.36"(The product is 6 cm), fit most desktop, do not worry anything, just enjoy the fantastic time

Extra Three Cable Ties

•Made from fabric material with hook & loop attachments, these cable straps are both reusable and durable

•Say goodbye to the clutter of cables, with this small fastening cable ties, you will get a easy and quick life

•Multi-purpose, it can use in various scenes, can be used to tie up speaker cables, guitar cables, TV cables, mic cables computer cables

Warm Family Time

Playing with your children to play guitar and increase a more harmonious relationship . An adjustable microphone stand will create an atmosphere and display better show

Prefect Music Singing

Goodbye to the terrible noises. The pop filter will lower the impact force and show a clear voice. Just be in confidence and sing or chat, a prefect noise will show your unique charm

Professional Speaking Show

Windscreen and pop filter included all inclusive microphone stand includes will provide greater speaking atmosphere. Broadcaster will present the most professional speech

• Sturdy & Durable Base: This desktop microphone stand is designed with a heavy weighted powder coated black finish base that features a rubber gasket on the bottom to absorb vibration and provide a precise balance and stability for kick drum and amp mic stand.
• Extendable Boom Arm: The telescoping boom arm allows you to adjust the length and angle to the perfect angle independently. When the boom arm is extended halfway, the max load is 4.4 lbs/2.0 kg. You can easily handle the weight of some microphone like Blue Snowball or Blue Yeti. Note: 3/8" female to 5/8" male screw adapter is included.
• Height Adjustable: The height of this InnoGear heavy-duty microphone stand is adjustable from 11'' to 15.8'' inches with a reliable clutch, allowing you to place it at the optimal height for maximum comfort while using.
• Flexible & Versatile: Flexible desktop microphone stand is a versatile configuration for broadcasts, podcasts, live performances which can be used for floor applications such as guitar amplifier cabinets, bass guitar amplifier cabinets, snare or tom bottom, keyboard amplifiers, theater, boundary, and so on.
• Compatibility: The microphone stand fits for most types of microphones like Fifine K669B, NW-700, Audio-Technica AT2020, Audio-Technica AT2035, Razer Seiren X, Shure SM7B…….

User questions & answers

Question:	Will this work with an m-audio producer usb mic
Answer:	Depends on how heavy it is and how far out you want to extend the boom. The mic I use is very heavy and it tips over when I extend the arm out all the way. The picture of it holding multiple mics is totally false.
Question:	What is the max height the stand head can reach
Answer:	Like 10 inches. I use for my streams and I wish it was taller. Looking back I'd rather have one that has multiple flex points and mounts to the side of the desk with a clamp or to the wall with screws. Desktop space is already limited.
Question:	I wasn't sure by their description. Can you extend the arm horizontally? And if so, about how far
Answer:	Without measuring, I'd say almost 18in. I used mine today and really like it.
Question:	Can you adjust it so it extends out more if you wanted the base a little further from you
Answer:	Yes you can I can adjust the base further from me

Product features

Adjustable Short Weighted Base Microphone Stand

InnoGear short weighted base mic stand is a versatile configuration for both beginner and professional use. Allows you to position your microphone at the perfect height and distance.

It has a maximum height of 40cm/15.8 inches and is constructed of heavy-duty steel with soft touch adjustment clutch for added comfort while adjusting the height. The 5.0 lbs weighted base is useful when using heavier mics that need additional balance.

Universal Microphone Clip

• With its durable, break-resistant design, the microphone clip allows for securely attaching and removing a microphone.
• The max diameter of the mic clip is 28mm, so you can handle different dynamic microphones like Shure SM58, Shure PGA48, Audio-Technica ATR2100-USB, Samson Q2U, Behringer Ultravoice Xm8500 and so on.

Heavy Weighted Base

• Unique design for the base, the center of gravity of the base is offset and the load is greater than other similar products on the market.
• The heavy weighted base provides balance and stability to the low-profile kick drum and amp mic stand. Rubber stripping on the underside of the base prevents scratching your desk, and acts to partially isolate the mic from noise.

U-shape Cable Management Clips

• Included with 2 pieces of small size durable and strong u-shape cable management clips which don’t take up much space when using or storing.
• Made of high quality material, very suitable for long term usage. Wide application for various cables including network cables, computer cables, USB cables, etcs.

• 【Flexible Adjust Any Angle You Want】KDD Unique Design – Each mic arm can individually flexibly adjust angle and position. KDD mic boom arm offers max length/height 35inch in horizontal/vertical distance, and support 360° full rotation and 180° bending. Also comes with a swivel metal ball head for 360° rotating and 45° & 90° tilt up and down. This great design can easily meet your all needs from any perfect angle and position.
• 【Stretchable Lengthened Design】KDD Innovative Design – The extendable or retractable design makes the microphone stand arm lengthen from 27 inches to 35 inches in one second! You can use the mic stand whether you're sitting, standing, close to or away from the desk to show your perfect voice. The microphone arm stand is foldable, which helps free up desk space and easy for you to carry around.
• 【Super Strong Joints With Fixed Gears】KDD desk mic stand is made of durable and reinforced aluminum alloy and gear fixing design for outstanding bearing capacity, it doesn't dip or sink over time due to gravity, protects microphone from shaking, suddenly dropping and making noise. Max load: 5lbs/2.3kg. You can use it with confidence! Flexible boom mic stand comes with an adjustable table mounting clamp with non-slip protective sponge pad, can easily clip to any desktop up to 2.2inch thick.
• 【4 in 1 Strong Compatibility Design】The mic stand is not only has 1/4" screw ball-head fit webcam/projrctor/camera that are designed with 1/4"-20 thread; But also comes with standard 1/4" to 3/8" and 1/4" to 5/8" screw adapter for different shock mounts and microphones, such as compatible with Blue Yeti, Blue Snowball, AT2020, Fifine K669B etc. 180° adjustable mic clip with screw fixed knob, you can simply adjust the mic angle and then lock the mic clip firmly in proper position without sinking.
• 【All In One & Wide Application】Package Includes 1 x Microphone Arm Stand, 1 x Desk Clamp Mount, 1 x Metal Ball Head, 1 x Mic Clip, 1 x 1/4" to 5/8" Conversion Screw, 1 x 1/4" to 3/8" Conversion Screw, 2 x Rubber Pads, 5 x Cable Ties, 1 x User Guide. The microphone mount is suitable for desk, table, Voice-Over sound studio, Youtube/Facebook video recording, radio broadcasting, streaming, games, studios, stage, TV stations, family performance, etc.

Product features

Upgraded Mic Holder With Locking Knob

The 180-degree adjustable mic clip holder is designed with a sturdy screw knob, which can firmly lock your microphone in the proper position without sinking and moving, so as to show your perfect voice without being affected.

More Extra Gifts

5 Cable Ties: Say goodbye to the clutter of cables with this quick and easy low-profile fastening solution.

Upgraded Strong Metal Ball Head.

1/4" to 5/8" Metal Screw Adapter.

1/4" to 3/8" Metal Screw Adapter.

2 Protective Rubber Pads.

Stable Locking With Gears

Once locked never move! KDD mic stand is designed with ultra-sturdy joints with fixed gears. Unlike other shaky bendable snake arms and swing arms, other products slow fall down or the angles change, but our product held up perfectly. Max load up to 5 lbs. Super safe and stable for your valuable microphones.

Extendable & Foldable Design

The extendable and retractable design makes the microphone stand arm lengthen from 27" to 35" in one second, suitable for flexible use in any occasion. Also can be folded aside to save space when idle, and extremely portable to carry anywhere.

Product description

Description:

Introducing, Pyle Universal Microphone Stand. This rugged and reliable construction bass-style mic stand is built to be both durable and lightweight for long term use. Also made of steel metal alloy complete in glossy black finish. The height can smoothly quick and easy, raise or lower height adjustment from 27.5” to 57.5” inches high. It also comes with quick setting lock-tight knob to avoid unexpected slip off from standing with the microphone. Along with it, Pyle used universal M-6 mic mount/clip and USA standard 5/8 inch microphone threading. Moreover, with it's solid rugged round base, Pyle mic stand will provide stability and precise balance to avoid it from collapsing. And in 11.78 lbs. counterweight is for a stable microphone placement which is perfect on-stage or in-studio use. We dare you to find a better microphone stand than this!

Features:

• Lightweight, Rugged & Reliable Construction
• USA Standard Microphone Adaptor and Threading
• Height Adjustable: 27.5-Inches to 57.5-Inches
• Quick Setting Lock-Tight Knob
• Universal Microphone Clip Included
• Compact Round Base Plate
• Glossy Black Finish
• Perfect for On-Stage or In-Studio Use
  
  
  
  Technical Specs:
• Mic Adapter Threading: 5/8-Inch, U.S. Standard
• Universal Mic Clip: M-6
• Construction Material: Steel Metal Alloy
• Sold as: Unit
• Weight: 11.78 lbs.
  
  
  
  

  —— SATISFACTION GUARANTEED ——

• Your satisfaction is our #1 priority.
• If this item fails to meet your expectations we will accept it back a full refund within the first 30 days.

From the Manufacturer

• HEIGHT ADJUSTABLE: Pyle universal microphone stand smoothly quick and easy, raise or lower height adjustment from 27.5” to 57.5” inches high. It is also made of steel metal alloy complete in glossy black finish for long term use.
• MIC HOLDER: The M-6 microphone holder is included as set which has USA standard 5/8 inch microphone adapter threading. It also comes with a quick setting lock-tight knob to avoid unexpected slip off from standing of the microphone.
• SOLID ROUND BASE PLATE: With it's solid round rugged base plate, Pyle mic stand will provide stability and precise balance to avoid it from collapsing. And in 11.78 lbs. counterweight is for a stable microphone placement.
• QUICK AND EASY SETUP: Unscrew the bolt from the end of the tube. Insert the bolt through the bottom of the base. Screw the pole back onto the bolt. Then, secure and tighten bolt from under base.
• WORKS PERFECTLY: Perfect mic positioning and optimal pickup for in studio or on stage performances. The Pyle PMKS40 is a class at its own unique feature.

User questions & answers

Question:	Does this come ready to use with a Yeti mic
Answer:	Hi, the microphone is not included in the package. Thank you.
Question:	The description states "11.78 lbs. counterweight", but the shipping weight is 10.66 lbs. What is the actual weight of the base
Answer:	Hi, the weight of the base is around 3 to 4 kgs. You may check other details of the unit by visiting our website pyleaudio.com. Type the model number on the search box PMKS40 for more details. Thank you.
Question:	Is there an adaptive piece I could buy for the mic stand? The microphone I bought is too large to fit in the one that comes with the stand
Answer:	Of course you can change it. Just search Amazon for Microphone Clip Holder. In my experience, the ones for wireless mics are larger.
Question:	Does it include a mic clip
Answer:	This thing is terrible and will stop working immediately. Don't buy it, clip or no.